summaryrefslogtreecommitdiffstats
path: root/src/H5FDros3.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/H5FDros3.c')
-rw-r--r--src/H5FDros3.c1847
1 files changed, 1847 insertions, 0 deletions
diff --git a/src/H5FDros3.c b/src/H5FDros3.c
new file mode 100644
index 0000000..86642aa
--- /dev/null
+++ b/src/H5FDros3.c
@@ -0,0 +1,1847 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group. *
+ * All rights reserved. *
+ * *
+ * This file is part of HDF5. The full HDF5 copyright notice, including *
+ * terms governing use, modification, and redistribution, is contained in *
+ * the COPYING file, which can be found at the root of the source code *
+ * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. *
+ * If you do not have access to either file, you may request a copy from *
+ * help@hdfgroup.org. *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Read-Only S3 Virtual File Driver (VFD)
+ *
+ * Programmer: Jacob Smith <jake.smith@hdfgroup.org>
+ * 2017-10-13
+ *
+ * Purpose:
+ *
+ * Provide read-only access to files hosted on Amazon's S3 service.
+ * Relies on "s3comms" utility layer to implement the AWS REST API.
+ */
+
+/* This source code file is part of the H5FD driver module */
+#include "H5FDdrvr_module.h"
+
+#include "H5private.h" /* Generic Functions */
+#include "H5Eprivate.h" /* Error handling */
+#include "H5FDprivate.h" /* File drivers */
+#include "H5FDros3.h" /* ros3 file driver */
+#include "H5FLprivate.h" /* Free Lists */
+#include "H5Iprivate.h" /* IDs */
+#include "H5MMprivate.h" /* Memory management */
+#include "H5FDs3comms.h" /* S3 Communications */
+
+/* toggle function call prints: 1 turns on
+ */
+#define ROS3_DEBUG 0
+
+/* toggle stats collection and reporting
+ */
+#define ROS3_STATS 0
+
+/* The driver identification number, initialized at runtime
+ */
+static hid_t H5FD_ROS3_g = 0;
+
+#if ROS3_STATS
+
+/* arbitrarily large value, such that any reasonable size read will be "less"
+ * than this value and set a true minimum
+ * not 0 because that may be a valid recorded minimum in degenerate cases
+ */
+#define ROS3_STATS_STARTING_MIN 0xfffffffful
+
+/* Configuration definitions for stats collection and breakdown
+ *
+ * 2^10 = 1024
+ * Reads up to 1024 bytes (1 kB) fall in bin 0
+ * 2^(10+(1*16)) = 2^26 = 64MB
+ * Reads of 64MB or greater fall in "overflow" bin[BIN_COUNT]
+ */
+#define ROS3_STATS_BASE 2
+#define ROS3_STATS_INTERVAL 1
+#define ROS3_STATS_START_POWER 10
+#define ROS3_STATS_BIN_COUNT 16 /* MUST BE GREATER THAN 0 */
+
+
+/*
+ * Calculate `BASE ^ (START_POWER + (INTERVAL * bin_i))`
+ * Stores result at `(unsigned long long *) out_ptr`.
+ * Used in computing boundaries between stats bins.
+ */
+#define ROS3_STATS_POW(bin_i, out_ptr) { \
+ unsigned long long donotshadowresult = 1; \
+ unsigned donotshadowindex = 0; \
+ for (donotshadowindex = 0; \
+ donotshadowindex < (((bin_i) * ROS3_STATS_INTERVAL) + \
+ ROS3_STATS_START_POWER); \
+ donotshadowindex++) \
+ { \
+ donotshadowresult *= ROS3_STATS_BASE; \
+ } \
+ *(out_ptr) = donotshadowresult; \
+}
+
+/* array to hold pre-computed boundaries for stats bins
+ */
+static unsigned long long ros3_stats_boundaries[ROS3_STATS_BIN_COUNT];
+
+/***************************************************************************
+ *
+ * Structure: ros3_statsbin
+ *
+ * Purpose:
+ *
+ * Structure for storing per-file ros3 VFD usage statistics.
+ *
+ *
+ *
+ * `count` (unsigned long long)
+ *
+ * Number of reads with size in this bin's range.
+ *
+ * `bytes` (unsigned long long)
+ *
+ * Total number of bytes read through this bin.
+ *
+ * `min` (unsigned long long)
+ *
+ * Smallest read size in this bin.
+ *
+ * `max` (unsigned long long)
+ *
+ * Largest read size in this bin.
+ *
+ *
+ *
+ * Programmer: Jacob Smith
+ *
+ * Changes: None
+ *
+ ***************************************************************************/
+typedef struct {
+ unsigned long long count;
+ unsigned long long bytes;
+ unsigned long long min;
+ unsigned long long max;
+} ros3_statsbin;
+
+#endif /* ROS3_STATS */
+
+/***************************************************************************
+ *
+ * Structure: H5FD_ros3_t
+ *
+ * Purpose:
+ *
+ * H5FD_ros3_t is a structure used to store all information needed to
+ * maintain R/O access to a single HDF5 file that has been stored as a
+ * S3 object. This structure is created when such a file is "opened" and
+ * discarded when it is "closed".
+ *
+ * Presents an S3 object as a file to the HDF5 library.
+ *
+ *
+ *
+ * `pub` (H5FD_t)
+ *
+ * Instance of H5FD_t which contains all fields common to all VFDs.
+ * It must be the first item in this structure, since at higher levels,
+ * this structure will be treated as an instance of H5FD_t.
+ *
+ * `fa` (H5FD_ros3_fapl_t)
+ *
+ * Instance of `H5FD_ros3_fapl_t` containing the S3 configuration data
+ * needed to "open" the HDF5 file.
+ *
+ * `eoa` (haddr_t)
+ *
+ * End of addressed space in file. After open, it should always
+ * equal the file size.
+ *
+ * `s3r_handle` (s3r_t *)
+ *
+ * Instance of S3 Request handle associated with the target resource.
+ * Responsible for communicating with remote host and presenting file
+ * contents as indistinguishable from a file on the local filesystem.
+ *
+ * *** present only if ROS3_SATS is flagged to enable stats collection ***
+ *
+ * `meta` (ros3_statsbin[])
+ * `raw` (ros3_statsbin[])
+ *
+ * Only present if ros3 stats collection is enabled.
+ *
+ * Arrays of `ros3_statsbin` structures to record raw- and metadata reads.
+ *
+ * Records count and size of reads performed by the VFD, and is used to
+ * print formatted usage statistics to stdout upon VFD shutdown.
+ *
+ * Reads of each raw- and metadata type are recorded in an individual bin
+ * determined by the size of the read. The last bin of each type is
+ * reserved for "big" reads, with no defined upper bound.
+ *
+ * *** end ROS3_STATS ***
+ *
+ *
+ *
+ * Programmer: Jacob Smith
+ *
+ * Changes: None.
+ *
+ ***************************************************************************/
+typedef struct H5FD_ros3_t {
+ H5FD_t pub;
+ H5FD_ros3_fapl_t fa;
+ haddr_t eoa;
+ s3r_t *s3r_handle;
+#if ROS3_STATS
+ ros3_statsbin meta[ROS3_STATS_BIN_COUNT + 1];
+ ros3_statsbin raw[ROS3_STATS_BIN_COUNT + 1];
+#endif
+} H5FD_ros3_t;
+
+/*
+ * These macros check for overflow of various quantities. These macros
+ * assume that HDoff_t is signed and haddr_t and size_t are unsigned.
+ *
+ * ADDR_OVERFLOW: Checks whether a file address of type `haddr_t'
+ * is too large to be represented by the second argument
+ * of the file seek function.
+ *
+ */
+#define MAXADDR (((haddr_t)1<<(8*sizeof(HDoff_t)-1))-1)
+#define ADDR_OVERFLOW(A) (HADDR_UNDEF==(A) || ((A) & ~(haddr_t)MAXADDR))
+
+/* Prototypes */
+static herr_t H5FD_ros3_term(void);
+static void *H5FD_ros3_fapl_get(H5FD_t *_file);
+static void *H5FD_ros3_fapl_copy(const void *_old_fa);
+static herr_t H5FD_ros3_fapl_free(void *_fa);
+static H5FD_t *H5FD_ros3_open(const char *name, unsigned flags, hid_t fapl_id,
+ haddr_t maxaddr);
+static herr_t H5FD_ros3_close(H5FD_t *_file);
+static int H5FD_ros3_cmp(const H5FD_t *_f1, const H5FD_t *_f2);
+static herr_t H5FD_ros3_query(const H5FD_t *_f1, unsigned long *flags);
+static haddr_t H5FD_ros3_get_eoa(const H5FD_t *_file, H5FD_mem_t type);
+static herr_t H5FD_ros3_set_eoa(H5FD_t *_file, H5FD_mem_t type, haddr_t addr);
+static haddr_t H5FD_ros3_get_eof(const H5FD_t *_file, H5FD_mem_t type);
+static herr_t H5FD_ros3_get_handle(H5FD_t *_file, hid_t fapl,
+ void** file_handle);
+static herr_t H5FD_ros3_read(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id,
+ haddr_t addr, size_t size, void *buf);
+static herr_t H5FD_ros3_write(H5FD_t *_file, H5FD_mem_t type, hid_t fapl_id,
+ haddr_t addr, size_t size, const void *buf);
+static herr_t H5FD_ros3_truncate(H5FD_t *_file, hid_t dxpl_id,
+ hbool_t closing);
+static herr_t H5FD_ros3_lock(H5FD_t *_file, hbool_t rw);
+static herr_t H5FD_ros3_unlock(H5FD_t *_file);
+static herr_t H5FD_ros3_validate_config(const H5FD_ros3_fapl_t * fa);
+
+static const H5FD_class_t H5FD_ros3_g = {
+ "ros3", /* name */
+ MAXADDR, /* maxaddr */
+ H5F_CLOSE_WEAK, /* fc_degree */
+ H5FD_ros3_term, /* terminate */
+ NULL, /* sb_size */
+ NULL, /* sb_encode */
+ NULL, /* sb_decode */
+ sizeof(H5FD_ros3_fapl_t), /* fapl_size */
+ H5FD_ros3_fapl_get, /* fapl_get */
+ H5FD_ros3_fapl_copy, /* fapl_copy */
+ H5FD_ros3_fapl_free, /* fapl_free */
+ 0, /* dxpl_size */
+ NULL, /* dxpl_copy */
+ NULL, /* dxpl_free */
+ H5FD_ros3_open, /* open */
+ H5FD_ros3_close, /* close */
+ H5FD_ros3_cmp, /* cmp */
+ H5FD_ros3_query, /* query */
+ NULL, /* get_type_map */
+ NULL, /* alloc */
+ NULL, /* free */
+ H5FD_ros3_get_eoa, /* get_eoa */
+ H5FD_ros3_set_eoa, /* set_eoa */
+ H5FD_ros3_get_eof, /* get_eof */
+ H5FD_ros3_get_handle, /* get_handle */
+ H5FD_ros3_read, /* read */
+ H5FD_ros3_write, /* write */
+ NULL, /* flush */
+ H5FD_ros3_truncate, /* truncate */
+ H5FD_ros3_lock, /* lock */
+ H5FD_ros3_unlock, /* unlock */
+ H5FD_FLMAP_DICHOTOMY /* fl_map */
+};
+
+/* Declare a free list to manage the H5FD_ros3_t struct */
+H5FL_DEFINE_STATIC(H5FD_ros3_t);
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD__init_package
+ *
+ * Purpose: Initializes any interface-specific data or routines.
+ *
+ * Return: Non-negative on success/Negative on failure
+ *
+ * Changes: Rename as appropriate for ros3 vfd.
+ * Jacob Smith 2017
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD__init_package(void)
+{
+ herr_t ret_value = SUCCEED;
+
+ FUNC_ENTER_STATIC
+
+ if (H5FD_ros3_init() < 0) {
+ HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, FAIL,
+ "unable to initialize ros3 VFD")
+ }
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* H5FD__init_package() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_ros3_init
+ *
+ * Purpose: Initialize this driver by registering the driver with the
+ * library.
+ *
+ * Return: Success: The driver ID for the ros3 driver.
+ * Failure: Negative
+ *
+ * Programmer: Robb Matzke
+ * Thursday, July 29, 1999
+ *
+ * Changes: Rename as appropriate for ros3 vfd.
+ * Jacob Smith 2017
+ *
+ *-------------------------------------------------------------------------
+ */
+hid_t
+H5FD_ros3_init(void)
+{
+ hid_t ret_value = H5I_INVALID_HID; /* Return value */
+
+ FUNC_ENTER_NOAPI(FAIL)
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_init() called.\n");
+#endif
+
+ if (H5I_VFL != H5I_get_type(H5FD_ROS3_g))
+ H5FD_ROS3_g = H5FD_register(&H5FD_ros3_g, sizeof(H5FD_class_t), FALSE);
+
+#if ROS3_STATS
+ /* pre-compute statsbin boundaries
+ */
+ for (unsigned bin_i = 0; bin_i < ROS3_STATS_BIN_COUNT; bin_i++) {
+ unsigned long long value = 0;
+ ROS3_STATS_POW(bin_i, &value)
+ ros3_stats_boundaries[bin_i] = value;
+ }
+#endif
+
+ /* Set return value */
+ ret_value = H5FD_ROS3_g;
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* end H5FD_ros3_init() */
+
+
+/*---------------------------------------------------------------------------
+ * Function: H5FD_ros3_term
+ *
+ * Purpose: Shut down the VFD
+ *
+ * Returns: SUCCEED (Can't fail)
+ *
+ * Programmer: Quincey Koziol
+ * Friday, Jan 30, 2004
+ *
+ * Changes: Rename as appropriate for ros3 vfd.
+ * Jacob Smith 2017
+ *
+ *---------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_term(void)
+{
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_term() called.\n");
+#endif
+
+ /* Reset VFL ID */
+ H5FD_ROS3_g = 0;
+
+ FUNC_LEAVE_NOAPI(SUCCEED)
+} /* end H5FD_ros3_term() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5Pset_fapl_ros3
+ *
+ * Purpose: Modify the file access property list to use the H5FD_ROS3
+ * driver defined in this source file. All driver specfic
+ * properties are passed in as a pointer to a suitably
+ * initialized instance of H5FD_ros3_fapl_t
+ *
+ * Return: SUCCEED/FAIL
+ *
+ * Programmer: John Mainzer
+ * 9/10/17
+ *
+ *-------------------------------------------------------------------------
+ */
+herr_t
+H5Pset_fapl_ros3(hid_t fapl_id,
+ H5FD_ros3_fapl_t *fa)
+{
+ H5P_genplist_t *plist = NULL; /* Property list pointer */
+ herr_t ret_value = FAIL;
+
+
+
+ FUNC_ENTER_API(FAIL)
+ H5TRACE2("e", "i*x", fapl_id, fa);
+
+ HDassert(fa != NULL);
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5Pset_fapl_ros3() called.\n");
+#endif
+
+ plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS);
+ if (plist == NULL) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, \
+ "not a file access property list")
+ }
+
+ if (FAIL == H5FD_ros3_validate_config(fa))
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "invalid ros3 config")
+
+ ret_value = H5P_set_driver(plist, H5FD_ROS3, (void *)fa);
+
+done:
+
+ FUNC_LEAVE_API(ret_value)
+
+} /* H5Pset_fapl_ros3() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_ros3_validate_config()
+ *
+ * Purpose: Test to see if the supplied instance of H5FD_ros3_fapl_t
+ * contains internally consistant data. Return SUCCEED if so,
+ * and FAIL otherwise.
+ *
+ * Note the difference between internally consistant and
+ * correct. As we will have to try to access the target
+ * object to determine whether the supplied data is correct,
+ * we will settle for internal consistancy at this point
+ *
+ * Return: SUCCEED if instance of H5FD_ros3_fapl_t contains internally
+ * consistant data, FAIL otherwise.
+ *
+ * Programmer: Jacob Smith
+ * 9/10/17
+ *
+ * Changes: Add checks for authenticate flag requring populated
+ * `aws_region` and `secret_id` strings.
+ * -- Jacob Smith 2017-11-01
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_validate_config(const H5FD_ros3_fapl_t * fa)
+{
+ herr_t ret_value = SUCCEED;
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+ HDassert(fa != NULL);
+
+ if ( fa->version != H5FD__CURR_ROS3_FAPL_T_VERSION ) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL,
+ "Unknown H5FD_ros3_fapl_t version");
+ }
+
+ /* if set to authenticate, region and id cannot be empty strings
+ */
+ if (fa->authenticate == TRUE) {
+ if ((fa->aws_region[0] == '\0') ||
+ (fa->secret_id[0] == '\0'))
+ {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL,
+ "Inconsistent authentication information");
+ }
+ }
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* H5FD_ros3_validate_config() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5Pget_fapl_ros3
+ *
+ * Purpose: Returns information about the ros3 file access property
+ * list though the function arguments.
+ *
+ * Return: Success: Non-negative
+ *
+ * Failure: Negative
+ *
+ * Programmer: John Mainzer
+ * 9/10/17
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+herr_t
+H5Pget_fapl_ros3(hid_t fapl_id,
+ H5FD_ros3_fapl_t *fa_out)
+{
+ const H5FD_ros3_fapl_t *fa;
+ H5P_genplist_t *plist = NULL; /* Property list pointer */
+ herr_t ret_value = SUCCEED; /* Return value */
+
+ FUNC_ENTER_API(FAIL)
+ H5TRACE2("e", "i*x", fapl_id, fa_out);
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5Pget_fapl_ros3() called.\n");
+#endif
+
+ if (fa_out == NULL)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "fa_out is NULL")
+
+ plist = H5P_object_verify(fapl_id, H5P_FILE_ACCESS);
+ if (plist == NULL) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access list")
+ }
+
+ if (H5FD_ROS3 != H5P_peek_driver(plist)) {
+ HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "incorrect VFL driver")
+ }
+
+ fa = (const H5FD_ros3_fapl_t *)H5P_peek_driver_info(plist);
+ if (fa == NULL) {
+ HGOTO_ERROR(H5E_PLIST, H5E_BADVALUE, FAIL, "bad VFL driver info")
+ }
+
+ /* Copy the ros3 fapl data out */
+ HDmemcpy(fa_out, fa, sizeof(H5FD_ros3_fapl_t));
+
+done:
+ FUNC_LEAVE_API(ret_value)
+
+} /* H5Pget_fapl_ros3() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_ros3_fapl_get
+ *
+ * Purpose: Gets a file access property list which could be used to
+ * create an identical file.
+ *
+ * Return: Success: Ptr to new file access property list value.
+ *
+ * Failure: NULL
+ *
+ * Programmer: John Mainzer
+ * 9/8/17
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static void *
+H5FD_ros3_fapl_get(H5FD_t *_file)
+{
+ H5FD_ros3_t *file = (H5FD_ros3_t*)_file;
+ H5FD_ros3_fapl_t *fa = NULL;
+ void *ret_value = NULL;
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+ fa = (H5FD_ros3_fapl_t *)H5MM_calloc(sizeof(H5FD_ros3_fapl_t));
+ if (fa == NULL) {
+ HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL,
+ "memory allocation failed")
+ }
+
+ /* Copy the fields of the structure */
+ HDmemcpy(fa, &(file->fa), sizeof(H5FD_ros3_fapl_t));
+
+ /* Set return value */
+ ret_value = fa;
+
+done:
+ if (ret_value == NULL) {
+ if (fa != NULL)
+ H5MM_xfree(fa);
+ }
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* H5FD_ros3_fapl_get() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_ros3_fapl_copy
+ *
+ * Purpose: Copies the ros3-specific file access properties.
+ *
+ * Return: Success: Ptr to a new property list
+ *
+ * Failure: NULL
+ *
+ * Programmer: John Mainzer
+ * 9/8/17
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static void *
+H5FD_ros3_fapl_copy(const void *_old_fa)
+{
+ const H5FD_ros3_fapl_t *old_fa = (const H5FD_ros3_fapl_t*)_old_fa;
+ H5FD_ros3_fapl_t *new_fa = NULL;
+ void *ret_value = NULL; /* Return value */
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+ new_fa = (H5FD_ros3_fapl_t *)H5MM_malloc(sizeof(H5FD_ros3_fapl_t));
+ if (new_fa == NULL) {
+ HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL,
+ "memory allocation failed");
+ }
+
+ HDmemcpy(new_fa, old_fa, sizeof(H5FD_ros3_fapl_t));
+ ret_value = new_fa;
+
+done:
+ if (ret_value == NULL) {
+ if (new_fa != NULL)
+ H5MM_xfree(new_fa);
+ }
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* H5FD_ros3_fapl_copy() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_ros3_fapl_free
+ *
+ * Purpose: Frees the ros3-specific file access properties.
+ *
+ * Return: SUCCEED (cannot fail)
+ *
+ * Programmer: John Mainzer
+ * 9/8/17
+ *
+ * Modifications:
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_fapl_free(void *_fa)
+{
+ H5FD_ros3_fapl_t *fa = (H5FD_ros3_fapl_t*)_fa;
+
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+ HDassert(fa != NULL); /* sanity check */
+
+ H5MM_xfree(fa);
+
+ FUNC_LEAVE_NOAPI(SUCCEED)
+
+} /* H5FD_ros3_fapl_free() */
+
+#if ROS3_STATS
+
+/*----------------------------------------------------------------------------
+ *
+ * Function: ros3_reset_stats()
+ *
+ * Purpose:
+ *
+ * Reset the stats collection elements in this virtual file structure.
+ *
+ * Clears any set data in stats bins; initializes/zeroes values.
+ *
+ * Return:
+ *
+ * - SUCCESS: `SUCCEED`
+ * - FAILURE: `FAIL`
+ * - Occurs if the file is invalid somehow
+ *
+ * Programmer: Jacob Smith
+ * 2017-12-08
+ *
+ * Changes: None.
+ *
+ *----------------------------------------------------------------------------
+ */
+static herr_t
+ros3_reset_stats(H5FD_ros3_t *file)
+{
+ unsigned i = 0;
+ herr_t ret_value = SUCCEED;
+
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+#if ROS3_DEBUG
+ HDprintf("ros3_reset_stats() called\n");
+#endif
+
+ if (file == NULL) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL,
+ "file was null");
+ }
+
+ for (i = 0; i <= ROS3_STATS_BIN_COUNT; i++) {
+ file->raw[i].bytes = 0;
+ file->raw[i].count = 0;
+ file->raw[i].min = (unsigned long long)ROS3_STATS_STARTING_MIN;
+ file->raw[i].max = 0;
+
+ file->meta[i].bytes = 0;
+ file->meta[i].count = 0;
+ file->meta[i].min = (unsigned long long)ROS3_STATS_STARTING_MIN;
+ file->meta[i].max = 0;
+ }
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value);
+
+} /* ros3_reset_stats */
+#endif /* ROS3_STATS */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_open()
+ *
+ * Purpose:
+ *
+ * Create and/or opens a file as an HDF5 file.
+ *
+ * Any flag except H5F_ACC_RDONLY will cause an error.
+ *
+ * Name (as received from `H5FD_open()`) must conform to web url:
+ * NAME :: HTTP "://" DOMAIN [PORT] ["/" [URI] [QUERY] ]
+ * HTTP :: "http" [ "s" ]
+ * DOMAIN :: e.g., "mybucket.host.org"
+ * PORT :: ":" <number> (e.g., ":9000" )
+ * URI :: <string> (e.g., "path/to/resource.hd5" )
+ * QUERY :: "?" <string> (e.g., "arg1=param1&arg2=param2")
+ *
+ * Return:
+ *
+ * Success: A pointer to a new file data structure.
+ * The public fields will be initialized by the caller, which is
+ * always H5FD_open().
+ *
+ * Failure: NULL
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-02
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static H5FD_t *
+H5FD_ros3_open(const char *url,
+ unsigned flags,
+ hid_t fapl_id,
+ haddr_t maxaddr)
+{
+#ifdef H5_HAVE_ROS3_VFD
+ H5FD_ros3_t *file = NULL;
+ struct tm *now = NULL;
+ char iso8601now[ISO8601_SIZE];
+ unsigned char signing_key[SHA256_DIGEST_LENGTH];
+ s3r_t *handle = NULL;
+ H5FD_ros3_fapl_t fa;
+#endif
+ H5FD_t *ret_value = NULL;
+
+
+
+ FUNC_ENTER_NOAPI_NOINIT
+#ifdef H5_HAVE_ROS3_VFD
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_open() called.\n");
+#endif
+
+
+ /* Sanity check on file offsets */
+ HDcompile_assert(sizeof(HDoff_t) >= sizeof(size_t));
+
+ /* Check arguments */
+ if (!url || !*url)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "invalid file name")
+ if (0 == maxaddr || HADDR_UNDEF == maxaddr)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADRANGE, NULL, "bogus maxaddr")
+ if (ADDR_OVERFLOW(maxaddr))
+ HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, NULL, "bogus maxaddr")
+ if (flags != H5F_ACC_RDONLY)
+ HGOTO_ERROR(H5E_ARGS, H5E_UNSUPPORTED, NULL,
+ "only Read-Only access allowed")
+
+ if (FAIL == H5Pget_fapl_ros3(fapl_id, &fa)) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL, "can't get property list")
+ }
+
+ if (CURLE_OK != curl_global_init(CURL_GLOBAL_DEFAULT)) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL,
+ "unable to initialize curl global (placeholder flags)")
+ }
+
+ /* open file; procedure depends on whether or not the fapl instructs to
+ * authenticate requests or not.
+ */
+ if (fa.authenticate == TRUE) {
+ /* compute signing key (part of AWS/S3 REST API)
+ * can be re-used by user/key for 7 days after creation.
+ * find way to re-use/share
+ */
+ now = gmnow();
+ HDassert( now != NULL );
+ if (ISO8601NOW(iso8601now, now) != (ISO8601_SIZE - 1)) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL,
+ "problem while writing iso8601 timestamp")
+ }
+ if (FAIL == H5FD_s3comms_signing_key(signing_key,
+ (const char *)fa.secret_key,
+ (const char *)fa.aws_region,
+ (const char *)iso8601now) )
+ {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, NULL,
+ "problem while computing signing key")
+ }
+
+ handle = H5FD_s3comms_s3r_open(
+ url,
+ (const char *)fa.aws_region,
+ (const char *)fa.secret_id,
+ (const unsigned char *)signing_key);
+ } else {
+ handle = H5FD_s3comms_s3r_open(url, NULL, NULL, NULL);
+ } /* if/else should authenticate */
+
+ if (handle == NULL) {
+ /* If we want to check CURL's say on the matter in a controlled
+ * fashion, this is the place to do it, but would need to make a
+ * few minor changes to s3comms `s3r_t` and `s3r_read()`.
+ */
+ HGOTO_ERROR(H5E_VFL, H5E_CANTOPENFILE, NULL, "could not open");
+ }
+
+ /* create new file struct
+ */
+ file = H5FL_CALLOC(H5FD_ros3_t);
+ if (file == NULL) {
+ HGOTO_ERROR(H5E_RESOURCE, H5E_NOSPACE, NULL,
+ "unable to allocate file struct")
+ }
+
+ file->s3r_handle = handle;
+ HDmemcpy(&(file->fa), &fa, sizeof(H5FD_ros3_fapl_t));
+
+#if ROS3_STATS
+ if (FAIL == ros3_reset_stats(file)) {
+ HGOTO_ERROR(H5E_INTERNAL, H5E_UNINITIALIZED, NULL,
+ "unable to reset file statistics")
+ }
+#endif /* ROS3_STATS */
+
+ ret_value = (H5FD_t*)file;
+
+done:
+ if (ret_value == NULL) {
+ if (handle != NULL) {
+ if (FAIL == H5FD_s3comms_s3r_close(handle)) {
+ HDONE_ERROR(H5E_VFL, H5E_CANTCLOSEFILE, NULL,
+ "unable to close s3 file handle")
+ }
+ }
+ if (file != NULL) {
+ file = H5FL_FREE(H5FD_ros3_t, file);
+ }
+ curl_global_cleanup(); /* early cleanup because open failed */
+ } /* if null return value (error) */
+#endif /* H5_HAVE_ROS3_VFD */
+
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* H5FD_ros3_open() */
+
+#if ROS3_STATS
+
+/*----------------------------------------------------------------------------
+ *
+ * Function: ros3_fprint_stats()
+ *
+ * Purpose:
+ *
+ * Tabulate and pretty-print statistics for this virtual file.
+ *
+ * Should be called upon file close.
+ *
+ * Shows number of reads and bytes read, broken down by
+ * "raw" (H5FD_MEM_DRAW)
+ * or "meta" (any other flag)
+ *
+ * Prints filename and listing of total number of reads and bytes read,
+ * both as a grand total and separate meta- and rawdata reads.
+ *
+ * If any reads were done, prints out two tables:
+ *
+ * 1. overview of raw- and metadata reads
+ * - min (smallest size read)
+ * - average of size read
+ * - k,M,G suffixes by powers of 1024 (2^10)
+ * - max (largest size read)
+ * 2. tabulation of "bins", sepraring reads into exponentially-larger
+ * ranges of size.
+ * - columns for number of reads, total bytes, and average size, with
+ * separate sub-colums for raw- and metadata reads.
+ * - each row represents one bin, identified by the top of its range
+ *
+ * Bin ranges can be modified with pound-defines at the top of this file.
+ *
+ * Bins without any reads in their bounds are not printed.
+ *
+ * An "overflow" bin is also present, to catch "big" reads.
+ *
+ * Output for all bins (and range ceiling and average size report)
+ * is divied by powers of 1024. By corollary, four digits before the decimal
+ * is valid.
+ *
+ * - 41080 bytes is represented by 40.177k, not 41.080k
+ * - 1004.831M represents approx. 1052642000 bytes
+ *
+ * Return:
+ *
+ * - SUCCESS: `SUCCEED`
+ * - FAILURE: `FAIL`
+ * - occurs if the file passed in is invalid
+ * - TODO: if stream is invalid? how can we check this?
+ *
+ * Programmer: Jacob Smith
+ *
+ * Changes: None.
+ *
+ *----------------------------------------------------------------------------
+ */
+static herr_t
+ros3_fprint_stats(FILE *stream,
+ const H5FD_ros3_t *file)
+{
+ herr_t ret_value = SUCCEED;
+ parsed_url_t *purl = NULL;
+ unsigned i = 0;
+ unsigned long count_meta = 0;
+ unsigned long count_raw = 0;
+ double average_meta = 0.0;
+ double average_raw = 0.0;
+ unsigned long long min_meta = (unsigned long long)ROS3_STATS_STARTING_MIN;
+ unsigned long long min_raw = (unsigned long long)ROS3_STATS_STARTING_MIN;
+ unsigned long long max_meta = 0;
+ unsigned long long max_raw = 0;
+ unsigned long long bytes_raw = 0;
+ unsigned long long bytes_meta = 0;
+ double re_dub = 0.0; /* re-usable double variable */
+ unsigned suffix_i = 0;
+ const char suffixes[] = { ' ', 'K', 'M', 'G', 'T', 'P' };
+
+
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+ if (stream == NULL) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL,
+ "file stream cannot be null" );
+ }
+ if (file == NULL) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL,
+ "file cannot be null");
+ }
+ if (file->s3r_handle == NULL) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL,
+ "s3 request handle cannot be null");
+ }
+ if (file->s3r_handle->purl == NULL) {
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL,
+ "parsed url structure cannot be null");
+ }
+ purl = file->s3r_handle->purl;
+
+ /******************
+ * PRINT FILENAME *
+ ******************/
+
+ HDfprintf(stream, "stats for %s://%s", purl->scheme, purl->host);
+ if (purl->port != NULL && purl->port[0] != '\0')
+ HDfprintf(stream, ":%s", purl->port);
+ if (purl->query != NULL && purl->query[0] != '\0') {
+ if (purl->path != NULL && purl->path[0] != '\0')
+ HDfprintf(stream, "/%s", purl->path);
+ else
+ HDfprintf(stream, "/");
+ HDfprintf(stream, "?%s", purl->query);
+ } else if (purl->path != NULL && purl->path[0] != '\0') {
+ HDfprintf(stream, "/%s", purl->path);
+ }
+ HDfprintf(stream, "\n");
+
+ /*******************
+ * AGGREGATE STATS *
+ *******************/
+
+ for (i = 0; i <= ROS3_STATS_BIN_COUNT; i++) {
+ const ros3_statsbin *r = &file->raw[i];
+ const ros3_statsbin *m = &file->meta[i];
+
+ if (m->min < min_meta) min_meta = m->min;
+ if (r->min < min_raw) min_raw = r->min;
+ if (m->max > max_meta) max_meta = m->max;
+ if (r->max > max_raw) max_raw = r->max;
+
+ count_raw += r->count;
+ count_meta += m->count;
+ bytes_raw += r->bytes;
+ bytes_meta += m->bytes;
+ }
+ if (count_raw > 0)
+ average_raw = (double)bytes_raw / (double)count_raw;
+ if (count_meta > 0)
+ average_meta = (double)bytes_meta / (double)count_meta;
+
+ /******************
+ * PRINT OVERVIEW *
+ ******************/
+
+ HDfprintf(stream, "TOTAL READS: %llu (%llu meta, %llu raw)\n",
+ count_raw + count_meta, count_meta, count_raw);
+ HDfprintf(stream, "TOTAL BYTES: %llu (%llu meta, %llu raw)\n",
+ bytes_raw + bytes_meta, bytes_meta, bytes_raw);
+
+ if (count_raw + count_meta == 0)
+ goto done;
+
+ /*************************
+ * PRINT AGGREGATE STATS *
+ *************************/
+
+ HDfprintf(stream, "SIZES meta raw\n");
+ HDfprintf(stream, " min ");
+ if (count_meta == 0) {
+ HDfprintf(stream, " 0.000 ");
+ } else {
+ re_dub = (double)min_meta;
+ for (suffix_i = 0; re_dub >= 1024.0; suffix_i++)
+ re_dub /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ HDfprintf(stream, "%8.3lf%c ", re_dub, suffixes[suffix_i]);
+ }
+
+ if (count_raw == 0) {
+ HDfprintf(stream, " 0.000 \n");
+ } else {
+ re_dub = (double)min_raw;
+ for (suffix_i = 0; re_dub >= 1024.0; suffix_i++)
+ re_dub /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ HDfprintf(stream, "%8.3lf%c\n", re_dub, suffixes[suffix_i]);
+ }
+
+ HDfprintf(stream, " avg ");
+ re_dub = (double)average_meta;
+ for (suffix_i = 0; re_dub >= 1024.0; suffix_i++)
+ re_dub /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ HDfprintf(stream, "%8.3lf%c ", re_dub, suffixes[suffix_i]);
+
+ re_dub = (double)average_raw;
+ for (suffix_i = 0; re_dub >= 1024.0; suffix_i++)
+ re_dub /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ HDfprintf(stream, "%8.3lf%c\n", re_dub, suffixes[suffix_i]);
+
+ HDfprintf(stream, " max ");
+ re_dub = (double)max_meta;
+ for (suffix_i = 0; re_dub >= 1024.0; suffix_i++)
+ re_dub /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ HDfprintf(stream, "%8.3lf%c ", re_dub, suffixes[suffix_i]);
+
+ re_dub = (double)max_raw;
+ for (suffix_i = 0; re_dub >= 1024.0; suffix_i++)
+ re_dub /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ HDfprintf(stream, "%8.3lf%c\n", re_dub, suffixes[suffix_i]);
+
+ /******************************
+ * PRINT INDIVIDUAL BIN STATS *
+ ******************************/
+
+ HDfprintf(stream,
+ "BINS # of reads total bytes average size\n");
+ HDfprintf(stream,
+ " up-to meta raw meta raw meta raw\n");
+
+ for (i = 0; i <= ROS3_STATS_BIN_COUNT; i++) {
+ const ros3_statsbin *m;
+ const ros3_statsbin *r;
+ unsigned long long range_end = 0;
+ char bm_suffix = ' '; /* bytes-meta */
+ double bm_val = 0.0;
+ char br_suffix = ' '; /* bytes-raw */
+ double br_val = 0.0;
+ char am_suffix = ' '; /* average-meta */
+ double am_val = 0.0;
+ char ar_suffix = ' '; /* average-raw */
+ double ar_val = 0.0;
+
+ m = &file->meta[i];
+ r = &file->raw[i];
+ if (r->count == 0 && m->count == 0)
+ continue;
+
+ range_end = ros3_stats_boundaries[i];
+
+ if (i == ROS3_STATS_BIN_COUNT) {
+ range_end = ros3_stats_boundaries[i-1];
+ HDfprintf(stream, ">");
+ } else {
+ HDfprintf(stream, " ");
+ }
+
+ bm_val = (double)m->bytes;
+ for (suffix_i = 0; bm_val >= 1024.0; suffix_i++)
+ bm_val /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ bm_suffix = suffixes[suffix_i];
+
+ br_val = (double)r->bytes;
+ for (suffix_i = 0; br_val >= 1024.0; suffix_i++)
+ br_val /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ br_suffix = suffixes[suffix_i];
+
+ if (m->count > 0)
+ am_val = (double)(m->bytes) / (double)(m->count);
+ for (suffix_i = 0; am_val >= 1024.0; suffix_i++)
+ am_val /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ am_suffix = suffixes[suffix_i];
+
+ if (r->count > 0)
+ ar_val = (double)(r->bytes) / (double)(r->count);
+ for (suffix_i = 0; ar_val >= 1024.0; suffix_i++)
+ ar_val /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+ ar_suffix = suffixes[suffix_i];
+
+ re_dub = (double)range_end;
+ for (suffix_i = 0; re_dub >= 1024.0; suffix_i++)
+ re_dub /= 1024.0;
+ HDassert(suffix_i < sizeof(suffixes));
+
+ HDfprintf(stream,
+ " %8.3f%c %7d %7d %8.3f%c %8.3f%c %8.3f%c %8.3f%c\n",
+ re_dub, suffixes[suffix_i], /* bin ceiling */
+ m->count, /* metadata reads */
+ r->count, /* rawdata reads */
+ bm_val, bm_suffix, /* metadata bytes */
+ br_val, br_suffix, /* rawdata bytes */
+ am_val, am_suffix, /* metadata average */
+ ar_val, ar_suffix); /* rawdata average */
+
+ fflush(stream);
+ }
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value);
+
+} /* ros3_fprint_stats */
+#endif /* ROS3_STATS */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_close()
+ *
+ * Purpose:
+ *
+ * Close an HDF5 file.
+ *
+ * Return:
+ *
+ * SUCCEED/FAIL
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-02
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_close(H5FD_t *_file)
+{
+#ifdef H5_HAVE_ROS3_VFD
+ H5FD_ros3_t *file = (H5FD_ros3_t *)_file;
+ herr_t ret_value = SUCCEED;
+#else
+ herr_t ret_value = FAIL;
+#endif
+
+
+
+ FUNC_ENTER_NOAPI_NOINIT
+#ifdef H5_HAVE_ROS3_VFD
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_close() called.\n");
+#endif
+
+ /* Sanity checks
+ */
+ HDassert(file != NULL);
+ HDassert(file->s3r_handle != NULL);
+
+ /* Close the underlying request handle
+ */
+ if (FAIL == H5FD_s3comms_s3r_close(file->s3r_handle)) {
+ HGOTO_ERROR(H5E_VFL, H5E_CANTCLOSEFILE, FAIL,
+ "unable to close S3 request handle")
+ }
+
+#if ROS3_STATS
+ /* TODO: mechanism to re-target stats printout */
+ if (FAIL == ros3_fprint_stats(stdout, file)) {
+ HGOTO_ERROR(H5E_INTERNAL, H5E_ERROR, FAIL,
+ "problem while writing file statistics")
+ }
+#endif /* ROS3_STATS */
+
+ /* Release the file info
+ */
+ file = H5FL_FREE(H5FD_ros3_t, file);
+
+done:
+ curl_global_cleanup(); /* cleanup to answer init on open */
+#endif /* H5_HAVE_ROS3_VFD */
+
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* end H5FD_ros3_close() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_cmp()
+ *
+ * Purpose:
+ *
+ * Compares two files belonging to this driver using an arbitrary
+ * (but consistent) ordering:
+ *
+ * + url scheme
+ * + url host
+ * + url port
+ * + url path
+ * + url query
+ * + fapl aws_region
+ * + fapl secret_id
+ * + fapl secret_key
+ *
+ * tl;dr -> check URL, check crentials
+ *
+ * Return:
+ *
+ * - Equivalent: 0
+ * - Not Equivalent: -1
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-06
+ *
+ * Changes:
+ *
+ * + Change from strcmp-like return values (-1, 0, 1) to instead return
+ * binary equivalence (0) or inequality (-1).
+ * + Replace "if still equal then check this" waterfall with GOTO jumps.
+ * Jacob Smith 2018-05-17
+ *
+ *-------------------------------------------------------------------------
+ */
+static int
+H5FD_ros3_cmp(const H5FD_t *_f1,
+ const H5FD_t *_f2)
+{
+#ifdef H5_HAVE_ROS3_VFD
+ const H5FD_ros3_t *f1 = (const H5FD_ros3_t *)_f1;
+ const H5FD_ros3_t *f2 = (const H5FD_ros3_t *)_f2;
+ const parsed_url_t *purl1 = NULL;
+ const parsed_url_t *purl2 = NULL;
+#endif
+ int ret_value = 0;
+
+
+
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+#ifdef H5_HAVE_ROS3_VFD
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_cmp() called.\n");
+#endif
+
+ HDassert(f1->s3r_handle != NULL);
+ HDassert(f2->s3r_handle != NULL);
+
+ purl1 = (const parsed_url_t *)f1->s3r_handle->purl;
+ purl2 = (const parsed_url_t *)f2->s3r_handle->purl;
+ HDassert(purl1 != NULL);
+ HDassert(purl2 != NULL);
+ HDassert(purl1->scheme != NULL);
+ HDassert(purl2->scheme != NULL);
+ HDassert(purl1->host != NULL);
+ HDassert(purl2->host != NULL);
+
+ /* URL: SCHEME */
+ if (HDstrcmp(purl1->scheme, purl2->scheme)) HGOTO_DONE(-1);
+
+ /* URL: HOST */
+ if (HDstrcmp(purl1->host, purl2->host)) HGOTO_DONE(-1);
+
+ /* URL: PORT */
+ if (purl1->port && purl2->port) {
+ if (HDstrcmp(purl1->port, purl2->port)) HGOTO_DONE(-1);
+ } else if (purl1->port) {
+ HGOTO_DONE(-1);
+ } else if (purl2->port) {
+ HGOTO_DONE(-1);
+ }
+
+ /* URL: PATH */
+ if (purl1->path && purl2->path) {
+ if (HDstrcmp(purl1->path, purl2->path)) HGOTO_DONE(-1);
+ } else if (purl1->path && !purl2->path) {
+ HGOTO_DONE(-1);
+ } else if (purl2->path && !purl1->path) {
+ HGOTO_DONE(-1);
+ }
+
+ /* URL: QUERY */
+ if (purl1->query && purl2->query) {
+ if (HDstrcmp(purl1->query, purl2->query)) HGOTO_DONE(-1);
+ } else if (purl1->query && !purl2->query) {
+ HGOTO_DONE(-1);
+ } else if (purl2->query && !purl1->query) {
+ HGOTO_DONE(-1);
+ }
+
+ /* FAPL: AWS_REGION */
+ if (f1->fa.aws_region[0] != '\0' && f1->fa.aws_region[0] != '\0') {
+ if (HDstrcmp(f1->fa.aws_region, f2->fa.aws_region)) HGOTO_DONE(-1);
+ } else if (f1->fa.aws_region[0] != '\0') {
+ HGOTO_DONE(-1);
+ } else if (f2->fa.aws_region[0] != '\0') {
+ HGOTO_DONE(-1);
+ }
+
+ /* FAPL: SECRET_ID */
+ if (f1->fa.secret_id[0] != '\0' && f1->fa.secret_id[0] != '\0') {
+ if (HDstrcmp(f1->fa.secret_id, f2->fa.secret_id)) HGOTO_DONE(-1);
+ } else if (f1->fa.secret_id[0] != '\0') {
+ HGOTO_DONE(-1);
+ } else if (f2->fa.secret_id[0] != '\0') {
+ HGOTO_DONE(-1);
+ }
+
+ /* FAPL: SECRET_KEY */
+ if (f1->fa.secret_key[0] != '\0' && f1->fa.secret_key[0] != '\0') {
+ if (HDstrcmp(f1->fa.secret_key, f2->fa.secret_key)) HGOTO_DONE(-1);
+ } else if (f1->fa.secret_key[0] != '\0') {
+ HGOTO_DONE(-1);
+ } else if (f2->fa.secret_key[0] != '\0') {
+ HGOTO_DONE(-1);
+ }
+#endif /* H5_HAVE_ROS3_VFD */
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* H5FD_ros3_cmp() */
+
+
+/*-------------------------------------------------------------------------
+ * Function: H5FD_ros3_query
+ *
+ * Purpose: Set the flags that this VFL driver is capable of supporting.
+ * (listed in H5FDpublic.h)
+ *
+ * Note that since the ROS3 VFD is read only, most flags
+ * are irrelevant.
+ *
+ * The term "set" is highly misleading...
+ * stores/copies the supported flags in the out-pointer `flags`.
+ *
+ * Return: SUCCEED (Can't fail)
+ *
+ * Programmer: John Mainzer
+ * 9/11/17
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_query(const H5FD_t H5_ATTR_UNUSED *_file,
+ unsigned long *flags /* out */)
+{
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_query() called.\n");
+#endif
+
+ /* Set the VFL feature flags that this driver supports */
+ if (flags) {
+ *flags = 0;
+ /* OK to perform data sieving for faster raw data reads & writes */
+ *flags |= H5FD_FEAT_DATA_SIEVE;
+ } /* end if */
+
+ FUNC_LEAVE_NOAPI(SUCCEED)
+
+} /* H5FD_ros3_query() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_get_eoa()
+ *
+ * Purpose:
+ *
+ * Gets the end-of-address marker for the file. The EOA marker
+ * is the first address past the last byte allocated in the
+ * format address space.
+ *
+ * Return:
+ *
+ * The end-of-address marker.
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-02
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static haddr_t
+H5FD_ros3_get_eoa(const H5FD_t *_file,
+ H5FD_mem_t H5_ATTR_UNUSED type)
+{
+ const H5FD_ros3_t *file = (const H5FD_ros3_t *)_file;
+
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_get_eoa() called.\n");
+#endif
+
+ FUNC_LEAVE_NOAPI(file->eoa)
+
+} /* end H5FD_ros3_get_eoa() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_set_eoa()
+ *
+ * Purpose:
+ *
+ * Set the end-of-address marker for the file.
+ *
+ * Return:
+ *
+ * SUCCEED (can't fail)
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-03
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_set_eoa(H5FD_t *_file,
+ H5FD_mem_t H5_ATTR_UNUSED type,
+ haddr_t addr)
+{
+ H5FD_ros3_t *file = (H5FD_ros3_t *)_file;
+
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_set_eoa() called.\n");
+#endif
+
+ file->eoa = addr;
+
+ FUNC_LEAVE_NOAPI(SUCCEED)
+
+} /* H5FD_ros3_set_eoa() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_get_eof()
+ *
+ * Purpose:
+ *
+ * Returns the end-of-file marker.
+ *
+ * Return:
+ *
+ * EOF: the first address past the end of the "file", either the
+ * filesystem file or the HDF5 file.
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-02
+ *
+ *-------------------------------------------------------------------------
+ */
+static haddr_t
+H5FD_ros3_get_eof(const H5FD_t *_file,
+ H5FD_mem_t H5_ATTR_UNUSED type)
+{
+ const H5FD_ros3_t *file = (const H5FD_ros3_t *)_file;
+
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_get_eof() called.\n");
+#endif
+
+ FUNC_LEAVE_NOAPI(H5FD_s3comms_s3r_get_filesize(file->s3r_handle))
+
+} /* end H5FD_ros3_get_eof() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_get_handle()
+ *
+ * Purpose:
+ *
+ * Returns the S3 Request handle (s3r_t) of ros3 file driver.
+ *
+ * Returns:
+ *
+ * SUCCEED/FAIL
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-02
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_get_handle(H5FD_t *_file,
+ hid_t H5_ATTR_UNUSED fapl,
+ void **file_handle)
+{
+ H5FD_ros3_t *file = (H5FD_ros3_t *)_file;
+ herr_t ret_value = SUCCEED;
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_get_handle() called.\n");
+#endif
+
+ if(!file_handle)
+ HGOTO_ERROR(H5E_ARGS, H5E_BADVALUE, FAIL, "file handle not valid")
+
+ *file_handle = file->s3r_handle;
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* end H5FD_ros3_get_handle() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_read()
+ *
+ * Purpose:
+ *
+ * Reads SIZE bytes of data from FILE beginning at address ADDR
+ * into buffer BUF according to data transfer properties in DXPL_ID.
+ *
+ * Return:
+ *
+ * Success: `SUCCEED`
+ * - Result is stored in caller-supplied buffer BUF.
+ * Failure: `FAIL`
+ * - Unable to complete read.
+ * - Contents of buffer `buf` are undefined.
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-??
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_read(H5FD_t *_file,
+ H5FD_mem_t H5_ATTR_UNUSED type,
+ hid_t H5_ATTR_UNUSED dxpl_id,
+ haddr_t addr, /* start offset */
+ size_t size, /* length of read */
+ void *buf) /* out */
+{
+ H5FD_ros3_t *file = (H5FD_ros3_t *)_file;
+ size_t filesize = 0;
+ herr_t ret_value = SUCCEED; /* Return value */
+#if ROS3_STATS
+ /* working variables for storing stats */
+ ros3_statsbin *bin = NULL;
+ unsigned bin_i = 0;
+#endif /* ROS3_STATS */
+
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_read() called.\n");
+#endif
+
+ HDassert(file != NULL);
+ HDassert(file->s3r_handle != NULL);
+ HDassert(buf != NULL);
+
+ filesize = H5FD_s3comms_s3r_get_filesize(file->s3r_handle);
+
+ if ((addr > filesize) || ((addr + size) > filesize)) {
+ HGOTO_ERROR(H5E_ARGS, H5E_OVERFLOW, FAIL, "range exceeds file address")
+ }
+
+ if (FAIL == H5FD_s3comms_s3r_read(file->s3r_handle, addr, size, buf) ) {
+ HGOTO_ERROR(H5E_VFL, H5E_READERROR, FAIL, "unable to execute read")
+ }
+
+#if ROS3_STATS
+
+ /* Find which "bin" this read fits in. Can be "overflow" bin.
+ */
+ for (bin_i = 0; bin_i < ROS3_STATS_BIN_COUNT; bin_i++) {
+ if ((unsigned long long)size < ros3_stats_boundaries[bin_i])
+ break;
+ }
+ bin = (type == H5FD_MEM_DRAW)
+ ? &file->raw[bin_i]
+ : &file->meta[bin_i];
+
+ /* Store collected stats in appropriate bin
+ */
+ if (bin->count == 0) {
+ bin->min = size;
+ bin->max = size;
+ } else {
+ if (size < bin->min)
+ bin->min = size;
+ if (size > bin->max)
+ bin->max = size;
+ }
+ bin->count++;
+ bin->bytes += (unsigned long long)size;
+
+#endif /* ROS3_STATS */
+
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* end H5FD_ros3_read() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_write()
+ *
+ * Purpose:
+ *
+ * Write bytes to file.
+ * UNSUPPORTED IN READ-ONLY ROS3 VFD.
+ *
+ * Return:
+ *
+ * FAIL (Not possible with Read-Only S3 file.)
+ *
+ * Programmer: Jacob Smith
+ * 2017-10-23
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_write(H5FD_t H5_ATTR_UNUSED *_file,
+ H5FD_mem_t H5_ATTR_UNUSED type,
+ hid_t H5_ATTR_UNUSED dxpl_id,
+ haddr_t H5_ATTR_UNUSED addr,
+ size_t H5_ATTR_UNUSED size,
+ const void H5_ATTR_UNUSED *buf)
+{
+ herr_t ret_value = FAIL;
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_write() called.\n");
+#endif
+
+ HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, FAIL,
+ "cannot write to read-only file.")
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* H5FD_ros3_write() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_truncate()
+ *
+ * Purpose:
+ *
+ * Makes sure that the true file size is the same (or larger)
+ * than the end-of-address.
+ *
+ * NOT POSSIBLE ON READ-ONLY S3 FILES.
+ *
+ * Return:
+ *
+ * FAIL (Not possible on Read-Only S3 files.)
+ *
+ * Programmer: Jacob Smith
+ * 2017-10-23
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_truncate(H5FD_t H5_ATTR_UNUSED *_file,
+ hid_t H5_ATTR_UNUSED dxpl_id,
+ hbool_t H5_ATTR_UNUSED closing)
+{
+ herr_t ret_value = SUCCEED;
+
+ FUNC_ENTER_NOAPI_NOINIT
+
+#if ROS3_DEBUG
+ HDfprintf(stdout, "H5FD_ros3_truncate() called.\n");
+#endif
+
+ HGOTO_ERROR(H5E_VFL, H5E_UNSUPPORTED, FAIL,
+ "cannot truncate read-only file.")
+
+done:
+ FUNC_LEAVE_NOAPI(ret_value)
+
+} /* end H5FD_ros3_truncate() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_lock()
+ *
+ * Purpose:
+ *
+ * Place an advisory lock on a file.
+ * No effect on Read-Only S3 file.
+ *
+ * Suggestion: remove lock/unlock from class
+ * > would result in error at H5FD_[un]lock() (H5FD.c)
+ *
+ * Return:
+ *
+ * SUCCEED (No-op always succeeds)
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-03
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_lock(H5FD_t H5_ATTR_UNUSED *_file,
+ hbool_t H5_ATTR_UNUSED rw)
+{
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+ FUNC_LEAVE_NOAPI(SUCCEED)
+
+} /* end H5FD_ros3_lock() */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Function: H5FD_ros3_unlock()
+ *
+ * Purpose:
+ *
+ * Remove the existing lock on the file.
+ * No effect on Read-Only S3 file.
+ *
+ * Return:
+ *
+ * SUCCEED (No-op always succeeds)
+ *
+ * Programmer: Jacob Smith
+ * 2017-11-03
+ *
+ * Changes: None.
+ *
+ *-------------------------------------------------------------------------
+ */
+static herr_t
+H5FD_ros3_unlock(H5FD_t H5_ATTR_UNUSED *_file)
+{
+ FUNC_ENTER_NOAPI_NOINIT_NOERR
+ FUNC_LEAVE_NOAPI(SUCCEED)
+
+} /* end H5FD_ros3_unlock() */
+
+