diff options
Diffstat (limited to 'src/H5Fquery.c')
| -rw-r--r-- | src/H5Fquery.c | 699 |
1 files changed, 266 insertions, 433 deletions
diff --git a/src/H5Fquery.c b/src/H5Fquery.c index 34fe8f9..be24072 100644 --- a/src/H5Fquery.c +++ b/src/H5Fquery.c @@ -5,12 +5,10 @@ * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * - * the files COPYING and Copyright.html. COPYING can be found at the root * - * of the source code distribution tree; Copyright.html can be found at the * - * root level of an installed copy of the electronic HDF5 document set and * - * is linked from the top-level documents page. It can also be found at * - * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * - * access to either file, you may request a copy from help@hdfgroup.org. * + * the COPYING file, which can be found at the root of the source code * + * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. * + * If you do not have access to either file, you may request a copy from * + * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /*------------------------------------------------------------------------- @@ -28,16 +26,16 @@ /* Module Setup */ /****************/ -#include "H5Fmodule.h" /* This source code file is part of the H5F module */ +#include "H5Fmodule.h" /* This source code file is part of the H5F module */ /***********/ /* Headers */ /***********/ -#include "H5private.h" /* Generic Functions */ -#include "H5Eprivate.h" /* Error handling */ -#include "H5Fpkg.h" /* File access */ -#include "H5FDprivate.h" /* File drivers */ +#include "H5private.h" /* Generic Functions */ +#include "H5Eprivate.h" /* Error handling */ +#include "H5Fpkg.h" /* File access */ +#include "H5FDprivate.h" /* File drivers */ /****************/ @@ -77,17 +75,13 @@ /*------------------------------------------------------------------------- - * Function: H5F_get_intent + * Function: H5F_get_intent * - * Purpose: Quick and dirty routine to retrieve the file's 'intent' flags - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: 'intent' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol <koziol@ncsa.uiuc.edu> - * September 29, 2000 + * Purpose: Quick and dirty routine to retrieve the file's 'intent' flags + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: 'intent' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ unsigned @@ -103,16 +97,62 @@ H5F_get_intent(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_open_name + * Function: H5F_get_low_bound + * + * Purpose: Quick and dirty routine to retrieve the file's low_bound. + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) + * + * Return: low_bound on success/abort on failure (shouldn't fail) + * + * Programmer: Vailin Choi; June 2016 + * + *------------------------------------------------------------------------- + */ +H5F_libver_t +H5F_get_low_bound(const H5F_t *f) +{ + /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */ + FUNC_ENTER_NOAPI_NOINIT_NOERR + + HDassert(f); + + FUNC_LEAVE_NOAPI(f->shared->low_bound) +} /* end H5F_get_low_bound() */ + + +/*------------------------------------------------------------------------- + * Function: H5F_get_high_bound + * + * Purpose: Quick and dirty routine to retrieve the file's high_bound. + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) + * + * Return: high_bound on success/abort on failure (shouldn't fail) * - * Purpose: Retrieve the name used to open a file. + * Programmer: Vailin Choi; June 2016 * - * Return: Success: The name of the file. - * Failure: ? (should not happen) + *------------------------------------------------------------------------- + */ +H5F_libver_t +H5F_get_high_bound(const H5F_t *f) +{ + /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */ + FUNC_ENTER_NOAPI_NOINIT_NOERR + + HDassert(f); + + FUNC_LEAVE_NOAPI(f->shared->high_bound) +} /* end H5F_get_high_bound() */ + + +/*------------------------------------------------------------------------- + * Function: H5F_get_open_name * - * Programmer: Neil Fortner - * December 15 2008 + * Purpose: Retrieve the name used to open a file. * + * Return: Success: The name of the file. + * Failure: ? (should not happen) *------------------------------------------------------------------------- */ char * @@ -129,16 +169,12 @@ H5F_get_open_name(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_actual_name + * Function: H5F_get_actual_name * - * Purpose: Retrieve the actual name of a file, after resolving symlinks, etc. - * - * Return: Success: The name of the file. - * Failure: ? (should not happen) - * - * Programmer: Quincey Koziol - * November 25 2009 + * Purpose: Retrieve the actual name of a file, after resolving symlinks, etc. * + * Return: Success: The name of the file. + * Failure: ? (should not happen) *------------------------------------------------------------------------- */ char * @@ -155,16 +191,13 @@ H5F_get_actual_name(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_extpath - * - * Purpose: Retrieve the file's 'extpath' flags - * This is used by H5L_extern_traverse() and H5D_build_extfile_prefix() to retrieve the main file's location - * when searching the target file. + * Function: H5F_get_extpath * - * Return: 'extpath' on success/abort on failure (shouldn't fail) - * - * Programmer: Vailin Choi, April 2, 2008 + * Purpose: Retrieve the file's 'extpath' flags + * This is used by H5L_extern_traverse() and H5D_build_file_prefix() to retrieve the main file's location + * when searching the target file. * + * Return: 'extpath' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ char * @@ -181,14 +214,11 @@ H5F_get_extpath(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_shared - * - * Purpose: Retrieve the file's 'shared' pointer - * - * Return: 'shared' on success/abort on failure (shouldn't fail) + * Function: H5F_get_shared * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'shared' pointer * + * Return: 'shared' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ H5F_file_t * @@ -204,14 +234,11 @@ H5F_get_shared(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_same_shared - * - * Purpose: Determine if two files have the same shared file pointer - * - * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) + * Function: H5F_same_shared * - * Programmer: Quincey Koziol, July 19, 2011 + * Purpose: Determine if two files have the same shared file pointer * + * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ hbool_t @@ -230,14 +257,11 @@ H5F_same_shared(const H5F_t *f1, const H5F_t *f2) /*------------------------------------------------------------------------- - * Function: H5F_get_nopen_objs + * Function: H5F_get_nopen_objs * - * Purpose: Retrieve the file's 'nopen_objs' value - * - * Return: 'nopen_objs' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'nopen_objs' value * + * Return: 'nopen_objs' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ unsigned @@ -253,14 +277,11 @@ H5F_get_nopen_objs(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_file_id - * - * Purpose: Retrieve the file's 'file_id' value + * Function: H5F_get_file_id * - * Return: 'file_id' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'file_id' value * + * Return: 'file_id' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ hid_t @@ -276,14 +297,11 @@ H5F_get_file_id(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_parent - * - * Purpose: Retrieve the file's 'parent' pointer - * - * Return: 'parent' on success/abort on failure (shouldn't fail) + * Function: H5F_get_parent * - * Programmer: Quincey Koziol, July 19, 2011 + * Purpose: Retrieve the file's 'parent' pointer * + * Return: 'parent' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ H5F_t * @@ -299,14 +317,11 @@ H5F_get_parent(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_nmounts + * Function: H5F_get_nmounts * - * Purpose: Retrieve the file's 'nmounts' value - * - * Return: 'nmounts' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'nmounts' value * + * Return: 'nmounts' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ unsigned @@ -322,14 +337,11 @@ H5F_get_nmounts(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_read_attempts - * - * Purpose: Retrieve the file's 'read_attempts' value + * Function: H5F_get_read_attempts * - * Return: '# of read attempts' on success/abort on failure (shouldn't fail) - * - * Programmer: Vaili Choi; Sept 2013 + * Purpose: Retrieve the file's 'read_attempts' value * + * Return: '# of read attempts' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ unsigned @@ -345,18 +357,12 @@ H5F_get_read_attempts(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_fcpl - * - * Purpose: Retrieve the value of a file's FCPL. + * Function: H5F_get_fcpl * - * Return: Success: The FCPL for the file. - * - * Failure: ? (should not happen) - * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * May 25 2005 + * Purpose: Retrieve the value of a file's FCPL. * + * Return: Success: The FCPL for the file. + * Failure: ? (should not happen) *------------------------------------------------------------------------- */ hid_t @@ -373,17 +379,13 @@ H5F_get_fcpl(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_sizeof_addr - * - * Purpose: Quick and dirty routine to retrieve the size of the file's size_t - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: 'sizeof_addr' on success/abort on failure (shouldn't fail) + * Function: H5F_sizeof_addr * - * Programmer: Quincey Koziol <koziol@ncsa.uiuc.edu> - * September 29, 2000 + * Purpose: Quick and dirty routine to retrieve the size of the file's size_t + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: 'sizeof_addr' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ uint8_t @@ -400,17 +402,13 @@ H5F_sizeof_addr(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_sizeof_size + * Function: H5F_sizeof_size * - * Purpose: Quick and dirty routine to retrieve the size of the file's off_t - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: 'sizeof_size' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol <koziol@ncsa.uiuc.edu> - * September 29, 2000 + * Purpose: Quick and dirty routine to retrieve the size of the file's off_t + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: 'sizeof_size' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ uint8_t @@ -427,14 +425,11 @@ H5F_sizeof_size(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_sohm_addr - * - * Purpose: Retrieve the file's 'sohm_addr' value + * Function: H5F_get_sohm_addr * - * Return: 'sohm_addr' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'sohm_addr' value * + * Return: 'sohm_addr' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ haddr_t @@ -451,14 +446,11 @@ H5F_get_sohm_addr(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_sohm_vers - * - * Purpose: Retrieve the file's 'sohm_vers' value - * - * Return: 'sohm_vers' on success/abort on failure (shouldn't fail) + * Function: H5F_get_sohm_vers * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'sohm_vers' value * + * Return: 'sohm_vers' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ unsigned @@ -475,14 +467,11 @@ H5F_get_sohm_vers(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_sohm_nindexes + * Function: H5F_get_sohm_nindexes * - * Purpose: Retrieve the file's 'sohm_nindexes' value - * - * Return: 'sohm_nindexes' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'sohm_nindexes' value * + * Return: 'sohm_nindexes' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ unsigned @@ -499,21 +488,15 @@ H5F_get_sohm_nindexes(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_sym_leaf_k + * Function: H5F_sym_leaf_k * - * Purpose: Replaced a macro to retrieve the symbol table leaf size, - * now that the generic properties are being used to store - * the values. + * Purpose: Replaced a macro to retrieve the symbol table leaf size, + * now that the generic properties are being used to store + * the values. * - * Return: Success: Non-negative, and the symbol table leaf size is + * Return: Success: Non-negative, and the symbol table leaf size is * returned. - * - * Failure: Negative (should not happen) - * - * Programmer: Raymond Lu - * slu@ncsa.uiuc.edu - * Oct 14 2001 - * + * Failure: Negative (should not happen) *------------------------------------------------------------------------- */ unsigned @@ -531,21 +514,15 @@ H5F_sym_leaf_k(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_Kvalue + * Function: H5F_Kvalue * - * Purpose: Replaced a macro to retrieve a B-tree key value for a certain - * type, now that the generic properties are being used to store - * the B-tree values. + * Purpose: Replaced a macro to retrieve a B-tree key value for a certain + * type, now that the generic properties are being used to store + * the B-tree values. * - * Return: Success: Non-negative, and the B-tree key value is + * Return: Success: Non-negative, and the B-tree key value is * returned. - * - * Failure: Negative (should not happen) - * - * Programmer: Raymond Lu - * slu@ncsa.uiuc.edu - * Oct 14 2001 - * + * Failure: Negative (should not happen) *------------------------------------------------------------------------- */ unsigned @@ -564,14 +541,11 @@ H5F_Kvalue(const H5F_t *f, const H5B_class_t *type) /*------------------------------------------------------------------------- - * Function: H5F_get_nrefs + * Function: H5F_get_nrefs * - * Purpose: Retrieve the file's 'nrefs' value - * - * Return: 'nrefs' on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol, July 20, 2011 + * Purpose: Retrieve the file's 'nrefs' value * + * Return: 'nrefs' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ unsigned @@ -588,21 +562,15 @@ H5F_get_nrefs(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_rdcc_nslots + * Function: H5F_rdcc_nslots * - * Purpose: Replaced a macro to retrieve the raw data cache number of slots, - * now that the generic properties are being used to store - * the values. + * Purpose: Replaced a macro to retrieve the raw data cache number of slots, + * now that the generic properties are being used to store + * the values. * - * Return: Success: Non-negative, and the raw data cache number of + * Return: Success: Non-negative, and the raw data cache number of * of slots is returned. - * - * Failure: Negative (should not happen) - * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * Jun 1 2004 - * + * Failure: Negative (should not happen) *------------------------------------------------------------------------- */ size_t @@ -619,21 +587,15 @@ H5F_rdcc_nslots(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_rdcc_nbytes + * Function: H5F_rdcc_nbytes * - * Purpose: Replaced a macro to retrieve the raw data cache number of bytes, - * now that the generic properties are being used to store - * the values. + * Purpose: Replaced a macro to retrieve the raw data cache number of bytes, + * now that the generic properties are being used to store + * the values. * - * Return: Success: Non-negative, and the raw data cache number of + * Return: Success: Non-negative, and the raw data cache number of * of bytes is returned. - * - * Failure: Negative (should not happen) - * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * Jun 1 2004 - * + * Failure: Negative (should not happen) *------------------------------------------------------------------------- */ size_t @@ -650,21 +612,15 @@ H5F_rdcc_nbytes(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_rdcc_w0 + * Function: H5F_rdcc_w0 * - * Purpose: Replaced a macro to retrieve the raw data cache 'w0' value - * now that the generic properties are being used to store - * the values. + * Purpose: Replaced a macro to retrieve the raw data cache 'w0' value + * now that the generic properties are being used to store + * the values. * - * Return: Success: Non-negative, and the raw data cache 'w0' value + * Return: Success: Non-negative, and the raw data cache 'w0' value * is returned. - * - * Failure: Negative (should not happen) - * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * Jun 2 2004 - * + * Failure: Negative (should not happen) *------------------------------------------------------------------------- */ double @@ -681,17 +637,13 @@ H5F_rdcc_w0(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_base_addr + * Function: H5F_get_base_addr * - * Purpose: Quick and dirty routine to retrieve the file's 'base_addr' value - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: Non-negative on success/Negative on failure - * - * Programmer: Raymond Lu <slu@ncsa.uiuc.edu> - * December 20, 2002 + * Purpose: Quick and dirty routine to retrieve the file's 'base_addr' value + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ haddr_t @@ -709,21 +661,15 @@ H5F_get_base_addr(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_grp_btree_shared + * Function: H5F_grp_btree_shared * - * Purpose: Replaced a macro to retrieve the shared B-tree node info - * now that the generic properties are being used to store - * the values. + * Purpose: Replaced a macro to retrieve the shared B-tree node info + * now that the generic properties are being used to store + * the values. * - * Return: Success: Non-void, and the shared B-tree node info + * Return: Success: Non-void, and the shared B-tree node info * is returned. - * - * Failure: void (should not happen) - * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * Jul 5 2004 - * + * Failure: void (should not happen) *------------------------------------------------------------------------- */ H5UC_t * @@ -740,21 +686,15 @@ H5F_grp_btree_shared(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_sieve_buf_size + * Function: H5F_sieve_buf_size * - * Purpose: Replaced a macro to retrieve the dataset sieve buffer size - * now that the generic properties are being used to store - * the values. + * Purpose: Replaced a macro to retrieve the dataset sieve buffer size + * now that the generic properties are being used to store + * the values. * - * Return: Success: Non-void, and the dataset sieve buffer size + * Return: Success: Non-void, and the dataset sieve buffer size * is returned. - * - * Failure: void (should not happen) - * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * Jul 8 2005 - * + * Failure: void (should not happen) *------------------------------------------------------------------------- */ size_t @@ -771,20 +711,18 @@ H5F_sieve_buf_size(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_gc_ref - * - * Purpose: Replaced a macro to retrieve the "garbage collect - * references flag" now that the generic properties are being used - * to store the values. + * Function: H5F_gc_ref * - * Return: Success: The "garbage collect references flag" - * is returned. + * Purpose: Replaced a macro to retrieve the "garbage collect + * references flag" now that the generic properties are being used + * to store the values. * - * Failure: (should not happen) + * Return: Success: The "garbage collect references flag" is returned. + * Failure: (should not happen) * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * Jul 8 2005 + * Programmer: Quincey Koziol + * koziol@ncsa.uiuc.edu + * Jul 8 2005 * *------------------------------------------------------------------------- */ @@ -802,46 +740,12 @@ H5F_gc_ref(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_use_latest_flags - * - * Purpose: Retrieve the 'latest version support' for the file. - * - * Return: Success: Non-negative, the requested 'version support' - * - * Failure: (can't happen) - * - * Programmer: Quincey Koziol - * koziol@hdfgroup.org - * Mar 5 2007 - * - *------------------------------------------------------------------------- - */ -unsigned -H5F_use_latest_flags(const H5F_t *f, unsigned fl) -{ - /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */ - FUNC_ENTER_NOAPI_NOINIT_NOERR - - HDassert(f); - HDassert(f->shared); - - FUNC_LEAVE_NOAPI(f->shared->latest_flags & (fl)) -} /* end H5F_use_latest_flags() */ - - -/*------------------------------------------------------------------------- - * Function: H5F_get_fc_degree - * - * Purpose: Retrieve the 'file close degree' for the file. - * - * Return: Success: Non-negative, the 'file close degree' - * - * Failure: (can't happen) + * Function: H5F_get_fc_degree * - * Programmer: Quincey Koziol - * koziol@hdfgroup.org - * Mar 5 2007 + * Purpose: Retrieve the 'file close degree' for the file. * + * Return: Success: Non-negative, the 'file close degree' + * Failure: (can't happen) *------------------------------------------------------------------------- */ H5F_close_degree_t @@ -866,10 +770,6 @@ H5F_get_fc_degree(const H5F_t *f) * Return: Success: Flag indicating whether the evict-on-close * property was set for the file. * Failure: (can't happen) - * - * Programmer: Dana Robinson - * Spring 2016 - * *------------------------------------------------------------------------- */ hbool_t @@ -886,18 +786,12 @@ H5F_get_evict_on_close(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_store_msg_crt_idx - * - * Purpose: Retrieve the 'store message creation index' flag for the file. + * Function: H5F_store_msg_crt_idx * - * Return: Success: Non-negative, the 'store message creation index' flag - * - * Failure: (can't happen) - * - * Programmer: Quincey Koziol - * koziol@hdfgroup.org - * Mar 6 2007 + * Purpose: Retrieve the 'store message creation index' flag for the file. * + * Return: Success: Non-negative, the 'store message creation index' flag + * Failure: (can't happen) *------------------------------------------------------------------------- */ hbool_t @@ -914,17 +808,12 @@ H5F_store_msg_crt_idx(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_has_feature - * - * Purpose: Check if a file has a particular feature enabled + * Function: H5F_has_feature * - * Return: Success: Non-negative - TRUE or FALSE - * Failure: Negative (should not happen) - * - * Programmer: Quincey Koziol - * koziol@ncsa.uiuc.edu - * May 31 2004 + * Purpose: Check if a file has a particular feature enabled * + * Return: Success: Non-negative - TRUE or FALSE + * Failure: Negative (should not happen) *------------------------------------------------------------------------- */ hbool_t @@ -941,17 +830,13 @@ H5F_has_feature(const H5F_t *f, unsigned feature) /*------------------------------------------------------------------------- - * Function: H5F_get_driver_id - * - * Purpose: Quick and dirty routine to retrieve the file's 'driver_id' value - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: 'driver_id' on success/abort on failure (shouldn't fail) + * Function: H5F_get_driver_id * - * Programmer: Quincey Koziol <koziol@ncsa.uiuc.edu> - * October 10, 2000 + * Purpose: Quick and dirty routine to retrieve the file's 'driver_id' value + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: 'driver_id' on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ hid_t @@ -969,23 +854,19 @@ H5F_get_driver_id(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_fileno + * Function: H5F_get_fileno * - * Purpose: Quick and dirty routine to retrieve the file's 'fileno' value - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: Non-negative on success/Negative on failure - * - * Programmer: Quincey Koziol <koziol@ncsa.uiuc.edu> - * March 27, 2002 + * Purpose: Quick and dirty routine to retrieve the file's 'fileno' value + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ herr_t H5F_get_fileno(const H5F_t *f, unsigned long *filenum) { - herr_t ret_value = SUCCEED; + herr_t ret_value = SUCCEED; FUNC_ENTER_NOAPI(FAIL) @@ -996,7 +877,7 @@ H5F_get_fileno(const H5F_t *f, unsigned long *filenum) /* Retrieve the file's serial number */ if(H5FD_get_fileno(f->shared->lf, filenum) < 0) - HGOTO_ERROR(H5E_FILE, H5E_BADRANGE, FAIL, "can't retrieve fileno") + HGOTO_ERROR(H5E_FILE, H5E_BADRANGE, FAIL, "can't retrieve fileno") done: FUNC_LEAVE_NOAPI(ret_value) @@ -1004,21 +885,17 @@ done: /*------------------------------------------------------------------------- - * Function: H5F_get_eoa - * - * Purpose: Quick and dirty routine to retrieve the file's 'eoa' value - * - * Return: Non-negative on success/Negative on failure + * Function: H5F_get_eoa * - * Programmer: Quincey Koziol <koziol@ncsa.uiuc.edu> - * June 1, 2004 + * Purpose: Quick and dirty routine to retrieve the file's 'eoa' value * + * Return: Non-negative on success/Negative on failure *------------------------------------------------------------------------- */ haddr_t H5F_get_eoa(const H5F_t *f, H5FD_mem_t type) { - haddr_t ret_value = HADDR_UNDEF; /* Return value */ + haddr_t ret_value = HADDR_UNDEF; /* Return value */ FUNC_ENTER_NOAPI(HADDR_UNDEF) @@ -1027,7 +904,7 @@ H5F_get_eoa(const H5F_t *f, H5FD_mem_t type) /* Dispatch to driver */ if(HADDR_UNDEF == (ret_value = H5FD_get_eoa(f->shared->lf, type))) - HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "driver get_eoa request failed") + HGOTO_ERROR(H5E_VFL, H5E_CANTINIT, HADDR_UNDEF, "driver get_eoa request failed") done: FUNC_LEAVE_NOAPI(ret_value) @@ -1042,10 +919,6 @@ done: * * Return: Success: Non-negative. * Failure: negative. - * - * Programmer: Raymond Lu - * Sep. 16, 2002 - * *------------------------------------------------------------------------- */ herr_t @@ -1069,18 +942,14 @@ done: /*------------------------------------------------------------------------- - * Function: H5F_is_tmp_addr - * - * Purpose: Quick and dirty routine to determine if an address is in - * the 'temporary' file space. - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) + * Function: H5F_is_tmp_addr * - * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol <koziol@hdfgroup.org> - * June 11, 2009 + * Purpose: Quick and dirty routine to determine if an address is in + * the 'temporary' file space. + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ hbool_t @@ -1097,18 +966,14 @@ H5F_is_tmp_addr(const H5F_t *f, haddr_t addr) /*------------------------------------------------------------------------- - * Function: H5F_use_tmp_space - * - * Purpose: Quick and dirty routine to determine if using temporary - * file space is allowed for this file. - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) + * Function: H5F_use_tmp_space * - * Programmer: Quincey Koziol <koziol@hdfgroup.org> - * July 1, 2009 + * Purpose: Quick and dirty routine to determine if using temporary + * file space is allowed for this file. + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ hbool_t @@ -1126,17 +991,12 @@ H5F_use_tmp_space(const H5F_t *f) #ifdef H5_HAVE_PARALLEL /*------------------------------------------------------------------------- - * Function: H5F_coll_md_read - * - * Purpose: Retrieve the 'collective metadata reads' flag for the file. + * Function: H5F_coll_md_read * - * Return: Success: Non-negative, the 'collective metadata reads' flag - * Failure: (can't happen) - * - * Programmer: Quincey Koziol - * koziol@hdfgroup.org - * Feb 10 2016 + * Purpose: Retrieve the 'collective metadata reads' flag for the file. * + * Return: Success: Non-negative, the 'collective metadata reads' flag + * Failure: (can't happen) *------------------------------------------------------------------------- */ H5P_coll_md_read_flag_t @@ -1153,18 +1013,14 @@ H5F_coll_md_read(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_use_mdc_logging - * - * Purpose: Quick and dirty routine to determine if using MDC logging - * is enabled for this file. - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) + * Function: H5F_use_mdc_logging * - * Programmer: Quincey Koziol <koziol@hdfgroup.org> - * June 5, 2016 + * Purpose: Quick and dirty routine to determine if using MDC logging + * is enabled for this file. + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ hbool_t @@ -1181,18 +1037,14 @@ H5F_use_mdc_logging(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_start_mdc_log_on_access + * Function: H5F_start_mdc_log_on_access * - * Purpose: Quick and dirty routine to determine if we should start MDC - * logging on access for this file. - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol <koziol@hdfgroup.org> - * June 5, 2016 + * Purpose: Quick and dirty routine to determine if we should start MDC + * logging on access for this file. + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ hbool_t @@ -1209,18 +1061,14 @@ H5F_start_mdc_log_on_access(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_mdc_log_location + * Function: H5F_mdc_log_location * - * Purpose: Quick and dirty routine to retrieve the MDC log location - * for this file. - * (Mainly added to stop non-file routines from poking about in the - * H5F_t data structure) - * - * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) - * - * Programmer: Quincey Koziol <koziol@hdfgroup.org> - * June 5, 2016 + * Purpose: Quick and dirty routine to retrieve the MDC log location + * for this file. + * (Mainly added to stop non-file routines from poking about in the + * H5F_t data structure) * + * Return: TRUE/FALSE on success/abort on failure (shouldn't fail) *------------------------------------------------------------------------- */ char * @@ -1237,16 +1085,12 @@ H5F_mdc_log_location(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_alignment - * - * Purpose: Retrieve the 'alignment' for the file. - * - * Return: Success: Non-negative, the 'alignment' - * - * Failure: (can't happen) + * Function: H5F_get_alignment * - * Programmer: Vailin Choi; Dec 2012 + * Purpose: Retrieve the 'alignment' for the file. * + * Return: Success: Non-negative, the 'alignment' + * Failure: (can't happen) *------------------------------------------------------------------------- */ hsize_t @@ -1263,16 +1107,12 @@ H5F_get_alignment(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_threshold + * Function: H5F_get_threshold * - * Purpose: Retrieve the 'threshold' for alignment in the file. - * - * Return: Success: Non-negative, the 'threshold' - * - * Failure: (can't happen) - * - * Programmer: Vailin Choi; Dec 2012 + * Purpose: Retrieve the 'threshold' for alignment in the file. * + * Return: Success: Non-negative, the 'threshold' + * Failure: (can't happen) *------------------------------------------------------------------------- */ hsize_t @@ -1289,16 +1129,12 @@ H5F_get_threshold(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_pgend_meta_thres - * - * Purpose: Retrieve the 'page end meta threshold size' for the file. - * - * Return: Success: Non-negative, the 'pgend_meta_thres' - * - * Failure: (can't happen) + * Function: H5F_get_pgend_meta_thres * - * Programmer: Vailin Choi; Dec 2012 + * Purpose: Retrieve the 'page end meta threshold size' for the file. * + * Return: Success: Non-negative, the 'pgend_meta_thres' + * Failure: (can't happen) *------------------------------------------------------------------------- */ hsize_t @@ -1315,13 +1151,12 @@ H5F_get_pgend_meta_thres(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_point_of_no_return + * Function: H5F_get_point_of_no_return * - * Purpose: Retrieve the 'point of no return' value for the file. - * - * Return: Success: Non-negative, the 'point_of_no_return' - * Failure: (can't happen) + * Purpose: Retrieve the 'point of no return' value for the file. * + * Return: Success: Non-negative, the 'point_of_no_return' + * Failure: (can't happen) *------------------------------------------------------------------------- */ hbool_t @@ -1338,13 +1173,12 @@ H5F_get_point_of_no_return(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_first_alloc_dealloc - * - * Purpose: Retrieve the 'first alloc / dealloc' value for the file. + * Function: H5F_get_first_alloc_dealloc * - * Return: Success: Non-negative, the 'first_alloc_dealloc' - * Failure: (can't happen) + * Purpose: Retrieve the 'first alloc / dealloc' value for the file. * + * Return: Success: Non-negative, the 'first_alloc_dealloc' + * Failure: (can't happen) *------------------------------------------------------------------------- */ hbool_t @@ -1361,16 +1195,15 @@ H5F_get_first_alloc_dealloc(const H5F_t *f) /*------------------------------------------------------------------------- - * Function: H5F_get_eoa_pre_fsm_fsalloc - * - * Purpose: Retrieve the 'EOA pre-FSM fsalloc' value for the file. + * Function: H5F_get_eoa_pre_fsm_fsalloc * - * Return: Success: Non-negative, the 'EOA pre-FSM fsalloc' - * Failure: (can't happen) + * Purpose: Retrieve the 'EOA pre-FSM fsalloc' value for the file. * + * Return: Success: Non-negative, the 'EOA pre-FSM fsalloc' + * Failure: (can't happen) *------------------------------------------------------------------------- */ -hbool_t +haddr_t H5F_get_eoa_pre_fsm_fsalloc(const H5F_t *f) { /* Use FUNC_ENTER_NOAPI_NOINIT_NOERR here to avoid performance issues */ |