diff options
Diffstat (limited to 'src/H5Ppublic.h')
-rw-r--r-- | src/H5Ppublic.h | 9496 |
1 files changed, 9263 insertions, 233 deletions
diff --git a/src/H5Ppublic.h b/src/H5Ppublic.h index 3ece6c3..fea8a39 100644 --- a/src/H5Ppublic.h +++ b/src/H5Ppublic.h @@ -103,68 +103,142 @@ extern "C" { /*******************/ /* Define property list class callback function pointer types */ +//! <!-- [H5P_cls_create_func_t_snip] --> typedef herr_t (*H5P_cls_create_func_t)(hid_t prop_id, void *create_data); +//! <!-- [H5P_cls_create_func_t_snip] --> + +//! <!-- [H5P_cls_copy_func_t_snip] --> typedef herr_t (*H5P_cls_copy_func_t)(hid_t new_prop_id, hid_t old_prop_id, void *copy_data); +//! <!-- [H5P_cls_copy_func_t_snip] --> + +//! <!-- [H5P_cls_close_func_t_snip] --> typedef herr_t (*H5P_cls_close_func_t)(hid_t prop_id, void *close_data); +//! <!-- [H5P_cls_close_func_t_snip] --> /* Define property list callback function pointer types */ +//! <!-- [H5P_prp_cb1_t_snip] --> +/** + * \brief Callback function for H5Pregister2(),H5Pregister1(),H5Pinsert2(),H5Pinsert1() + * + * \param[in] name The name of the property + * \param[in] size The size of the property in bytes + * \param[in,out] value The value for the property + * \return \herr_t + * + * \details The H5P_prp_cb1_t() describes the parameters used by the + * property create,copy and close callback functions. + */ typedef herr_t (*H5P_prp_cb1_t)(const char *name, size_t size, void *value); +//! <!-- [H5P_prp_cb1_t_snip] --> + +//! <!-- [H5P_prp_cb2_t_snip] --> +/** + * \brief Callback function for H5Pregister2(),H5Pregister1(),H5Pinsert2(),H5Pinsert1() + * + * \plist_id{prop_id} + * \param[in] name The name of the property + * \param[in] size The size of the property in bytes + * \param[in] value The value for the property + * \return \herr_t + * + * \details The H5P_prp_cb2_t() describes the parameters used by the + * property set ,copy and delete callback functions. + */ typedef herr_t (*H5P_prp_cb2_t)(hid_t prop_id, const char *name, size_t size, void *value); +//! <!-- [H5P_prp_cb2_t_snip] --> + typedef H5P_prp_cb1_t H5P_prp_create_func_t; typedef H5P_prp_cb2_t H5P_prp_set_func_t; typedef H5P_prp_cb2_t H5P_prp_get_func_t; typedef H5P_prp_cb2_t H5P_prp_delete_func_t; typedef H5P_prp_cb1_t H5P_prp_copy_func_t; + +//! <!-- [H5P_prp_compare_func_t_snip] --> typedef int (*H5P_prp_compare_func_t)(const void *value1, const void *value2, size_t size); +//! <!-- [H5P_prp_compare_func_t_snip] --> + typedef H5P_prp_cb1_t H5P_prp_close_func_t; /* Define property list iteration function type */ +//! <!-- [H5P_iterate_t_snip] --> typedef herr_t (*H5P_iterate_t)(hid_t id, const char *name, void *iter_data); +//! <!-- [H5P_iterate_t_snip] --> -/* Actual IO mode property */ +//! <!--[H5D_mpio_actual_chunk_opt_mode_t_snip] --> +/** + * Actual IO mode property + * + * \details The default value, #H5D_MPIO_NO_CHUNK_OPTIMIZATION, is used for all + * I/O operations that do not use chunk optimizations, including + * non-collective I/O and contiguous collective I/O. + */ typedef enum H5D_mpio_actual_chunk_opt_mode_t { - /* The default value, H5D_MPIO_NO_CHUNK_OPTIMIZATION, is used for all I/O - * operations that do not use chunk optimizations, including non-collective - * I/O and contiguous collective I/O. - */ H5D_MPIO_NO_CHUNK_OPTIMIZATION = 0, + /**< No chunk optimization was performed. Either no collective I/O was + attempted or the dataset wasn't chunked. */ H5D_MPIO_LINK_CHUNK, + /**< Collective I/O is performed on all chunks simultaneously. */ H5D_MPIO_MULTI_CHUNK + /**< Each chunk was individually assigned collective or independent I/O based + on what fraction of processes access the chunk. If the fraction is greater + than the multi chunk ratio threshold, collective I/O is performed on that + chunk. The multi chunk ratio threshold can be set using + H5Pset_dxpl_mpio_chunk_opt_ratio(). The default value is 60%. */ } H5D_mpio_actual_chunk_opt_mode_t; +//! <!--[H5D_mpio_actual_chunk_opt_mode_t_snip] --> +//! <!-- [H5D_mpio_actual_io_mode_t_snip] --> +/** + * The following values are conveniently defined as a bit field so that + * we can switch from the default to independent or collective and then to + * mixed without having to check the original value. + */ typedef enum H5D_mpio_actual_io_mode_t { - /* The following four values are conveniently defined as a bit field so that - * we can switch from the default to independent or collective and then to - * mixed without having to check the original value. - * - * NO_COLLECTIVE means that either collective I/O wasn't requested or that - * no I/O took place. - * - * CHUNK_INDEPENDENT means that collective I/O was requested, but the - * chunk optimization scheme chose independent I/O for each chunk. - */ - H5D_MPIO_NO_COLLECTIVE = 0x0, + H5D_MPIO_NO_COLLECTIVE = 0x0, + /**< No collective I/O was performed. Collective I/O was not requested or + collective I/O isn't possible on this dataset */ H5D_MPIO_CHUNK_INDEPENDENT = 0x1, - H5D_MPIO_CHUNK_COLLECTIVE = 0x2, - H5D_MPIO_CHUNK_MIXED = 0x1 | 0x2, - - /* The contiguous case is separate from the bit field. */ + /**< HDF5 performed one the chunk collective optimization schemes and each + chunk was accessed independently */ + H5D_MPIO_CHUNK_COLLECTIVE = 0x2, + /**< HDF5 performed one the chunk collective optimization schemes and each + chunk was accessed collectively */ + H5D_MPIO_CHUNK_MIXED = 0x1 | 0x2, + /**< HDF5 performed one the chunk collective optimization schemes and some + chunks were accessed independently, some collectively. */ + /** \internal The contiguous case is separate from the bit field. */ H5D_MPIO_CONTIGUOUS_COLLECTIVE = 0x4 + /**< Collective I/O was performed on a contiguous dataset */ } H5D_mpio_actual_io_mode_t; +//! <!-- [H5D_mpio_actual_io_mode_t_snip] --> -/* Broken collective IO property */ +//! <!-- [H5D_mpio_no_collective_cause_t_snip] --> +/** + * Broken collective IO property + */ typedef enum H5D_mpio_no_collective_cause_t { - H5D_MPIO_COLLECTIVE = 0x00, - H5D_MPIO_SET_INDEPENDENT = 0x01, - H5D_MPIO_DATATYPE_CONVERSION = 0x02, - H5D_MPIO_DATA_TRANSFORMS = 0x04, - H5D_MPIO_MPI_OPT_TYPES_ENV_VAR_DISABLED = 0x08, - H5D_MPIO_NOT_SIMPLE_OR_SCALAR_DATASPACES = 0x10, - H5D_MPIO_NOT_CONTIGUOUS_OR_CHUNKED_DATASET = 0x20, - H5D_MPIO_PARALLEL_FILTERED_WRITES_DISABLED = 0x40, + H5D_MPIO_COLLECTIVE = 0x00, + /**< Collective I/O was performed successfully */ + H5D_MPIO_SET_INDEPENDENT = 0x01, + /**< Collective I/O was not performed because independent I/O was requested */ + H5D_MPIO_DATATYPE_CONVERSION = 0x02, + /**< Collective I/O was not performed because datatype conversions were required */ + H5D_MPIO_DATA_TRANSFORMS = 0x04, + /**< Collective I/O was not performed because data transforms needed to be applied */ + H5D_MPIO_MPI_OPT_TYPES_ENV_VAR_DISABLED = 0x08, + /**< \todo FIXME! */ + H5D_MPIO_NOT_SIMPLE_OR_SCALAR_DATASPACES = 0x10, + /**< Collective I/O was not performed because one of the dataspaces was neither simple nor scalar */ + H5D_MPIO_NOT_CONTIGUOUS_OR_CHUNKED_DATASET = 0x20, + /**< Collective I/O was not performed because the dataset was neither contiguous nor chunked */ + H5D_MPIO_PARALLEL_FILTERED_WRITES_DISABLED = 0x40, + /**< \todo FIXME! */ H5D_MPIO_ERROR_WHILE_CHECKING_COLLECTIVE_POSSIBLE = 0x80, - H5D_MPIO_NO_COLLECTIVE_MAX_CAUSE = 0x100 + /**< \todo FIXME! */ + H5D_MPIO_NO_COLLECTIVE_MAX_CAUSE = 0x100 + /**< Sentinel */ } H5D_mpio_no_collective_cause_t; +//! <!-- [H5D_mpio_no_collective_cause_t_snip] --> /********************/ /* Public Variables */ @@ -214,264 +288,8817 @@ H5_DLLVAR hid_t H5P_LST_LINK_ACCESS_ID_g; /*********************/ /* Generic property list routines */ -H5_DLL hid_t H5Pcreate_class(hid_t parent, const char *name, H5P_cls_create_func_t cls_create, - void *create_data, H5P_cls_copy_func_t cls_copy, void *copy_data, - H5P_cls_close_func_t cls_close, void *close_data); -H5_DLL char * H5Pget_class_name(hid_t pclass_id); -H5_DLL hid_t H5Pcreate(hid_t cls_id); -H5_DLL herr_t H5Pregister2(hid_t cls_id, const char *name, size_t size, void *def_value, - H5P_prp_create_func_t prp_create, H5P_prp_set_func_t prp_set, - H5P_prp_get_func_t prp_get, H5P_prp_delete_func_t prp_del, - H5P_prp_copy_func_t prp_copy, H5P_prp_compare_func_t prp_cmp, - H5P_prp_close_func_t prp_close); -H5_DLL herr_t H5Pinsert2(hid_t plist_id, const char *name, size_t size, void *value, - H5P_prp_set_func_t prp_set, H5P_prp_get_func_t prp_get, - H5P_prp_delete_func_t prp_delete, H5P_prp_copy_func_t prp_copy, - H5P_prp_compare_func_t prp_cmp, H5P_prp_close_func_t prp_close); -H5_DLL herr_t H5Pset(hid_t plist_id, const char *name, const void *value); -H5_DLL htri_t H5Pexist(hid_t plist_id, const char *name); + +/** + * \ingroup GPLO + * + * \brief Terminates access to a property list + * + * \plist_id + * + * \return \herr_t + * + * \details H5Pclose() terminates access to a property list. All property + * lists should be closed when the application is finished + * accessing them. This frees resources used by the property + * list. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pclose(hid_t plist_id); +/** + * \ingroup GPLOA + * + * \brief Closes an existing property list class + * + * \plistcls_id{plist_id} + * + * \return \herr_t + * + * \details H5Pclose_class() removes a property list class from the library. + * Existing property lists of this class will continue to exist, + * but new ones are not able to be created. + * + * \since 1.4.0 + * + */ +H5_DLL herr_t H5Pclose_class(hid_t plist_id); +/** + * \ingroup GPLO + * + * \brief Copies an existing property list to create a new property list + * + * \plist_id + * + * \return \hid_t{property list} + * + * \details H5Pcopy() copies an existing property list to create a new + * property list. The new property list has the same properties + * and values as the original property list. + * + * \since 1.0.0 + * + */ +H5_DLL hid_t H5Pcopy(hid_t plist_id); +/** + * \ingroup GPLOA + * + * \brief Copies a property from one list or class to another + * + * \param[in] dst_id Identifier of the destination property list or class + * \param[in] src_id Identifier of the source property list or class + * \param[in] name Name of the property to copy + * + * \return \herr_t + * + * \details H5Pcopy_prop() copies a property from one property list or + * class to another. + * + * If a property is copied from one class to another, all the + * property information will be first deleted from the destination + * class and then the property information will be copied from the + * source class into the destination class. + * + * If a property is copied from one list to another, the property + * will be first deleted from the destination list (generating a + * call to the close callback for the property, if one exists) + * and then the property is copied from the source list to the + * destination list (generating a call to the copy callback for + * the property, if one exists). + * + * If the property does not exist in the class or list, this + * call is equivalent to calling H5Pregister() or H5Pinsert() (for + * a class or list, as appropriate) and the create callback will + * be called in the case of the property being copied into a list + * (if such a callback exists for the property). + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pcopy_prop(hid_t dst_id, hid_t src_id, const char *name); +/** + * \ingroup GPLO + * + * \brief Creates a new property list as an instance of a property list class + * + * \plistcls_id{cls_id} + * + * \return \hid_t{property list} + * + * \details H5Pcreate() creates a new property list as an instance of + * some property list class. The new property list is initialized + * with default values for the specified class. The classes are as + * follows: + * + * <table> + * <tr> + * <th>Class Identifier</th> + * <th>Class Name</th> + * <th>Comments</th> + * </tr> + * <tr> + * <td>#H5P_ATTRIBUTE_CREATE</td> + * <td>attribute create</td> + * <td>Properties for attribute creation</td> + * </tr> + * <tr> + * <td>#H5P_DATASET_ACCESS</td> + * <td>dataset access</td> + * <td>Properties for dataset access</td> + * </tr> + * <tr> + * <td>#H5P_DATASET_CREATE</td> + * <td>dataset create</td> + * <td>Properties for dataset creation</td> + * </tr> + * <tr> + * <td>#H5P_DATASET_XFER</td> + * <td>data transfer</td> + * <td>Properties for raw data transfer</td> + * </tr> + * <tr> + * <td>#H5P_DATATYPE_ACCESS</td> + * <td>datatype access</td> + * <td>Properties for datatype access</td> + * </tr> + * <tr> + * <td>#H5P_DATATYPE_CREATE</td> + * <td>datatype create</td> + * <td>Properties for datatype creation</td> + * </tr> + * <tr> + * <td>#H5P_FILE_ACCESS</td> + * <td>file access</td> + * <td>Properties for file access</td> + * </tr> + * <tr> + * <td>#H5P_FILE_CREATE</td> + * <td>file create</td> + * <td>Properties for file creation</td> + * </tr> + * <tr> + * <td>#H5P_FILE_MOUNT</td> + * <td>file mount</td> + * <td>Properties for file mounting</td> + * </tr> + * <tr valign="top"> + * <td>#H5P_GROUP_ACCESS</td> + * <td>group access</td> + * <td>Properties for group access</td> + * </tr> + * <tr> + * <td>#H5P_GROUP_CREATE</td> + * <td>group create</td> + * <td>Properties for group creation</td> + * </tr> + * <tr> + * <td>#H5P_LINK_ACCESS</td> + * <td>link access</td> + * <td>Properties governing link traversal when accessing objects</td> + * </tr> + * <tr> + * <td>#H5P_LINK_CREATE</td> + * <td>link create</td> + * <td>Properties governing link creation</td> + * </tr> + * <tr> + * <td>#H5P_OBJECT_COPY</td> + * <td>object copy</td> + * <td>Properties governing the object copying process</td> + * </tr> + * <tr> + * <td>#H5P_OBJECT_CREATE</td> + * <td>object create</td> + * <td>Properties for object creation</td> + * </tr> + * <tr> + * <td>#H5P_STRING_CREATE</td> + * <td>string create</td> + * <td>Properties for character encoding when encoding strings or + * object names</td> + * </tr> + * </table> + * + * This property list must eventually be closed with H5Pclose(); + * otherwise, errors are likely to occur. + * + * \version 1.8.15 For each class, the class name returned by + * H5Pget_class_name() was added. + * The list of possible Fortran values was updated. + * \version 1.8.0 The following property list classes were added at this + * release: #H5P_DATASET_ACCESS, #H5P_GROUP_CREATE, + * #H5P_GROUP_ACCESS, #H5P_DATATYPE_CREATE, + * #H5P_DATATYPE_ACCESS, #H5P_ATTRIBUTE_CREATE + * + * \since 1.0.0 + * + */ +H5_DLL hid_t H5Pcreate(hid_t cls_id); +/** + * \ingroup GPLOA + * + * \brief Creates a new property list class + * + * \plistcls_id{parent} + * \param[in] name Name of property list class to register + * \param[in] create Callback routine called when a property list is + * created + * \param[in] create_data Pointer to user-defined class create data, to be + * passed along to class create callback + * \param[in] copy Callback routine called when a property list is + * copied + * \param[in] copy_data Pointer to user-defined class copy data, to be + * passed along to class copy callback + * \param[in] close Callback routine called when a property list is + * being closed + * \param[in] close_data Pointer to user-defined class close data, to be + * passed along to class close callback + * + * \return \hid_t{property list class} + * + * \details H5Pcreate_class() registers a new property list class with the + * library. The new property list class can inherit from an + * existing property list class, \p parent, or may be derived + * from the default “empty” class, NULL. New classes with + * inherited properties from existing classes may not remove + * those existing properties, only add or remove their own class + * properties. Property list classes defined and supported in the + * HDF5 library distribution are listed and briefly described in + * H5Pcreate(). The \p create routine is called when a new property + * list of this class is being created. The #H5P_cls_create_func_t + * callback function is defined as follows: + * + * \snippet this H5P_cls_create_func_t_snip + * + * The parameters to this callback function are defined as follows: + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list being created</td> + * </tr> + * <tr> + * <td>\Code{void * create_data}</td> + * <td>IN: User pointer to any class creation data required</td> + * </tr> + * </table> + * + * The \p create routine is called after any registered + * \p create function is called for each property value. If the + * \p create routine returns a negative value, the new list is not + * returned to the user and the property list creation routine returns + * an error value. + * + * The \p copy routine is called when an existing property + * list of this class is copied. The #H5P_cls_copy_func_t callback + * function is defined as follows: + * \snippet this H5P_cls_copy_func_t_snip + * + * The parameters to this callback function are defined as follows: + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list created by copying</td> + * </tr> + * <tr> + * <td>\Code{void * copy_data}</td> + * <td>IN: User pointer to any class copy data required</td> + * </tr> + * </table> + * + * The \p copy routine is called after any registered \p copy function + * is called for each property value. If the \p copy routine returns a + * negative value, the new list is not returned to the user and the + * property list \p copy routine returns an error value. + * + * The \p close routine is called when a property list of this class + * is being closed. The #H5P_cls_close_func_t callback function is + * defined as follows: + * \snippet this H5P_cls_close_func_t_snip + * + * The parameters to this callback function are defined as follows: + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list being closed</td> + * </tr> + * <tr> + * <td>\Code{void * close_data}</td> + * <td>IN: User pointer to any class close data required</td> + * </tr> + * </table> + * + * The \p close routine is called before any registered \p close + * function is called for each property value. If the \p close routine + * returns a negative value, the property list close routine returns + * an error value but the property list is still closed. + * + * H5Pclose_class() can be used to release the property list class + * identifier returned by this function so that resources leaks will + * not develop. + * + * \since 1.4.0 + * + */ +H5_DLL hid_t H5Pcreate_class(hid_t parent, const char *name, H5P_cls_create_func_t create, void *create_data, + H5P_cls_copy_func_t copy, void *copy_data, H5P_cls_close_func_t close, + void *close_data); +/** + * \ingroup GPLO + * + * \brief Decodes property list received in a binary object buffer and + * returns a new property list identifier + * + * \param[in] buf Buffer holding the encoded property list + * + * \return \hid_tv{object} + * + * \details Given a binary property list description in a buffer, H5Pdecode() + * reconstructs the HDF5 property list and returns an identifier + * for the new property list. The binary description of the property + * list is encoded by H5Pencode(). + * + * The user is responsible for passing in the correct buffer. + * + * The property list identifier returned by this function should be + * released with H5Pclose() when the identifier is no longer needed + * so that resource leaks will not develop. + * + * \note Some properties cannot be encoded and therefore will not be available + * in the decoded property list. These properties are discussed in + * H5Pencode(). + * + * \since 1.10.0 + * + */ +H5_DLL hid_t H5Pdecode(const void *buf); +/** + * \ingroup GPLO + * + * \brief Encodes the property values in a property list into a binary + * buffer + * + * \plist_id + * \param[out] buf Buffer into which the property list will be encoded. + * If the provided buffer is NULL, the size of the + * buffer required is returned through \p nalloc; the + * function does nothing more. + * \param[out] nalloc The size of the required buffer + * + * \return \herr_t + * + * \details H5Pencode() encodes the property list \p plist_id into the + * binary buffer \p buf. + * + * If the required buffer size is unknown, \p buf can be passed + * in as NULL and the function will set the required buffer size + * in \p nalloc. The buffer can then be created and the property + * list encoded with a subsequent H5Pencode() call. + * + * If the buffer passed in is not big enough to hold the encoded + * properties, the H5Pencode() call can be expected to fail with + * a segmentation fault. + * + * Properties that do not have encode callbacks will be skipped. + * There is currently no mechanism to register an encode callback for + * a user-defined property, so user-defined properties cannot currently + * be encoded. + * + * Some properties cannot be encoded, particularly properties that are + * reliant on local context. + * + * \since 1.10.0 + * + */ H5_DLL herr_t H5Pencode(hid_t plist_id, void *buf, size_t *nalloc); -H5_DLL hid_t H5Pdecode(const void *buf); -H5_DLL herr_t H5Pget_size(hid_t id, const char *name, size_t *size); -H5_DLL herr_t H5Pget_nprops(hid_t id, size_t *nprops); -H5_DLL hid_t H5Pget_class(hid_t plist_id); -H5_DLL hid_t H5Pget_class_parent(hid_t pclass_id); -H5_DLL herr_t H5Pget(hid_t plist_id, const char *name, void *value); +/** + * \ingroup GPLOA + * + * \brief Compares two property lists or classes for equality + * + * \param[in] id1 First property object to be compared + * \param[in] id2 Second property object to be compared + * + * \return \htri_t + * + * \details H5Pequal() compares two property lists or classes to determine + * whether they are equal to one another. + * + * Either both \p id1 and \p id2 must be property lists or both + * must be classes; comparing a list to a class is an error. + * + * \since 1.4.0 + * + */ H5_DLL htri_t H5Pequal(hid_t id1, hid_t id2); +/** + * \ingroup GPLOA + * + * \brief Queries whether a property name exists in a property list or + * class + * + * \param[in] plist_id Identifier for the property list or class to query + * \param[in] name Name of property to check for + * + * \return \htri_t + * + * \details H5Pexist() determines whether a property exists within a + * property list or class. + * + * \since 1.4.0 + * + */ +H5_DLL htri_t H5Pexist(hid_t plist_id, const char *name); +/** + * \ingroup GPLOA + * + * \brief Queries the value of a property + * + * \plist_id + * \param[in] name Name of property to query + * \param[out] value Pointer to a location to which to copy the value of + * the property + * + * \return \herr_t + * + * \details H5Pget() retrieves a copy of the value for a property in a + * property list. If there is a \p get callback routine registered + * for this property, the copy of the value of the property will + * first be passed to that routine and any changes to the copy of + * the value will be used when returning the property value from + * this routine. + * + * This routine may be called for zero-sized properties with the + * \p value set to NULL. The \p get routine will be called with + * a NULL value if the callback exists. + * + * The property name must exist or this routine will fail. + * + * If the \p get callback routine returns an error, \ value will + * not be modified. + * + * \since 1.4.0 + * + */ +H5_DLL herr_t H5Pget(hid_t plist_id, const char *name, void *value); +/** + *\ingroup GPLO + * + * \brief Returns the property list class identifier for a property list + * + * \plist_id + * + * \return \hid_t{property list class} + * + * \details H5Pget_class() returns the property list class identifier for + * the property list identified by the \p plist_id parameter. + * + * Note that H5Pget_class() returns a value of #hid_t type, an + * internal HDF5 identifier, rather than directly returning a + * property list class. That identifier can then be used with + * either H5Pequal() or H5Pget_class_name() to determine which + * predefined HDF5 property list class H5Pget_class() has returned. + * + * A full list of valid predefined property list classes appears + * in the description of H5Pcreate(). + * + * Determining the HDF5 property list class name with H5Pequal() + * requires a series of H5Pequal() calls in an if-else sequence. + * An iterative sequence of H5Pequal() calls can compare the + * identifier returned by H5Pget_class() to members of the list of + * valid property list class names. A pseudo-code snippet might + * read as follows: + * + * \code + * plist_class_id = H5Pget_class (dsetA_plist); + * + * if H5Pequal (plist_class_id, H5P_OBJECT_CREATE) = TRUE; + * [ H5P_OBJECT_CREATE is the property list class ] + * [ returned by H5Pget_class. ] + * + * else if H5Pequal (plist_class_id, H5P_DATASET_CREATE) = TRUE; + * [ H5P_DATASET_CREATE is the property list class. ] + * + * else if H5Pequal (plist_class_id, H5P_DATASET_XFER) = TRUE; + * [ H5P_DATASET_XFER is the property list class. ] + * + * . + * . [ Continuing the iteration until a match is found. ] + * . + * \endcode + * + * H5Pget_class_name() returns the property list class name directly + * as a string: + * + * \code + * plist_class_id = H5Pget_class (dsetA_plist); + * plist_class_name = H5Pget_class_name (plist_class_id) + * \endcode + * + * Note that frequent use of H5Pget_class_name() can become a + * performance problem in a high-performance environment. The + * H5Pequal() approach is generally much faster. + * + * \version 1.6.0 Return type changed in this release. + * \since 1.0.0 + * + */ +H5_DLL hid_t H5Pget_class(hid_t plist_id); +/** + * \ingroup GPLOA + * + * \brief Retrieves the name of a class + * + * \plistcls_id{pclass_id} + * + * \return Returns a pointer to an allocated string containing the class + * name if successful, and NULL if not successful. + * + * \details H5Pget_class_name() retrieves the name of a generic property + * list class. The pointer to the name must be freed by the user + * with a call to H5free_memory() after each successful call. + * + * <table> + * <tr> + * <th>Class Name (class identifier) Returned</th> + * <th>Property List Class</th> + * <th>Expanded Name of the Property List Class</th> + * <th>The Class Identifier Used with H5Pcreate</th> + * <th>Comments</th> + * </tr> + * <tr> + * <td>attribute create</td> + * <td>acpl</td> + * <td>Attribute Creation Property List</td> + * <td>H5P_ATTRIBUTE_CREATE</td> + * <td> </td> + * </tr> + * <tr> + * <td>dataset access</td> + * <td>dapl</td> + * <td>Dataset Access Property List</td> + * <td>H5P_DATASET_ACCESS</td> + * <td> </td> + * </tr> + * <tr> + * <td>dataset create</td> + * <td>dcpl</td> + * <td>Dataset Creation Property List</td> + * <td>H5P_DATASET_CREATE</td> + * <td> </td> + * </tr> + * <tr> + * <td>data transfer</td> + * <td>dxpl</td> + * <td>Data Transfer Property List</td> + * <td>H5P_DATASET_XFER</td> + * <td> </td> + * </tr> + * <tr> + * <td>datatype access</td> + * <td> </td> + * <td> </td> + * <td>H5P_DATATYPE_ACCESS</td> + * <td>This class can be created, but there are no properties + * in the class currently. + * </td> + * </tr> + * <tr> + * <td>datatype create</td> + * <td> </td> + * <td> </td> + * <td>H5P_DATATYPE_CREATE</td> + * <td>This class can be created, but there + * are no properties in the class currently.</td> + * </tr> + * <tr> + * <td>file access</td> + * <td>fapl</td> + * <td>File Access Property List</td> + * <td>H5P_FILE_ACCESS</td> + * <td> </td> + * </tr> + * <tr> + * <td>file create</td> + * <td>fcpl</td> + * <td>File Creation Property List</td> + * <td>H5P_FILE_CREATE</td> + * <td> </td> + * </tr> + * <tr> + * <td>file mount</td> + * <td>fmpl</td> + * <td>File Mount Property List</td> + * <td>H5P_FILE_MOUNT</td> + * <td> </td> + * </tr> + * <tr> + * <td>group access</td> + * <td> </td> + * <td> </td> + * <td>H5P_GROUP_ACCESS</td> + * <td>This class can be created, but there + * are no properties in the class currently.</td> + * </tr> + * <tr> + * <td>group create</td> + * <td>gcpl</td> + * <td>Group Creation Property List</td> + * <td>H5P_GROUP_CREATE</td> + * <td> </td> + * </tr> + * <tr> + * <td>link access</td> + * <td>lapl</td> + * <td>Link Access Property List</td> + * <td>H5P_LINK_ACCESS</td> + * <td> </td> + * </tr> + * <tr> + * <td>link create</td> + * <td>lcpl</td> + * <td>Link Creation Property List</td> + * <td>H5P_LINK_CREATE</td> + * <td> </td> + * </tr> + * <tr> + * <td>object copy</td> + * <td>ocpypl</td> + * <td>Object Copy Property List</td> + * <td>H5P_OBJECT_COPY</td> + * <td> </td> + * </tr> + * <tr> + * <td>object create</td> + * <td>ocpl</td> + * <td>Object Creation Property List</td> + * <td>H5P_OBJECT_CREATE</td> + * <td> </td> + * </tr> + * <tr> + * <td>string create</td> + * <td>strcpl</td> + * <td>String Creation Property List</td> + * <td>H5P_STRING_CREATE</td> + * <td> </td> + * </tr> + * </table> + * + * \since 1.4.0 + * + */ +H5_DLL char *H5Pget_class_name(hid_t pclass_id); +/** + * \ingroup GPLOA + * + * \brief Retrieves the parent class of a property class + * + * \plistcls_id{pclass_id} + * + * \return \hid_t{parent class object} + * + * \details H5Pget_class_parent() retrieves an identifier for the parent + * class of a property class. + * + * \since 1.4.0 + * + */ +H5_DLL hid_t H5Pget_class_parent(hid_t pclass_id); +/** + * \ingroup GPLOA + * + * \brief Queries the number of properties in a property list or class + * + * \param[in] id Identifier for property object to query + * \param[out] nprops Number of properties in object + * + * \return \herr_t + * + * \details H5Pget_nprops() retrieves the number of properties in a + * property list or property list class. + * + * If \p id is a property list identifier, the current number of + * properties in the list is returned in \p nprops. + * + * If \p id is a property list class identifier, the number of + * registered properties in the class is returned in \p nprops. + * + * \since 1.4.0 + * + */ +H5_DLL herr_t H5Pget_nprops(hid_t id, size_t *nprops); +/** + * \ingroup GPLOA + * + * \brief Queries the size of a property value in bytes + * + * \param[in] id Identifier of property object to query + * \param[in] name Name of property to query + * \param[out] size Size of property in bytes + * + * \return \herr_t + * + * \details H5Pget_size() retrieves the size of a property's value in + * bytes. This function operates on both property lists and + * property classes. + * + * Zero-sized properties are allowed and return 0. + * + * \since 1.4.0 + * + */ +H5_DLL herr_t H5Pget_size(hid_t id, const char *name, size_t *size); +/** + * \ingroup GPLOA + * + * \brief Registers a temporary property with a property list + * + * \plist_id + * \param[in] name Name of property to create + * \param[in] size Size of property in bytes + * \param[in] value Initial value for the property + * \param[in] set Callback routine called before a new value is copied + * into the property's value + * \param[in] get Callback routine called when a property value is + * retrieved from the property + * \param[in] prp_del Callback routine called when a property is deleted + * from a property list + * \param[in] copy Callback routine called when a property is copied + * from an existing property list + * \param[in] compare Callback routine called when a property is compared + * with another property list + * \param[in] close Callback routine called when a property list is + * being closed and the property value will be disposed + * of + * + * \return \herr_t + * + * \details H5Pinsert2() creates a new property in a property + * list. The property will exist only in this property list and + * copies made from it. + * + * The initial property value must be provided in \p value and + * the property value will be set accordingly. + * + * The name of the property must not already exist in this list, + * or this routine will fail. + * + * The \p set and \p get callback routines may be set to NULL + * if they are not needed. + * + * Zero-sized properties are allowed and do not store any data + * in the property list. The default value of a zero-size + * property may be set to NULL. They may be used to indicate the + * presence or absence of a particular piece of information. + * + * The \p set routine is called before a new value is copied + * into the property. The #H5P_prp_set_func_t callback function + * is defined as follows: + * \snippet this H5P_prp_cb2_t_snip + * + * The parameters to the callback function are defined as follows: + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list being + * modified</td> + * </tr> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property being modified</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN: Pointer to new value pointer for the property + * being modified</td> + * </tr> + * </table> + * + * The \p set routine may modify the value pointer to be set and + * those changes will be used when setting the property's value. + * If the \p set routine returns a negative value, the new property + * value is not copied into the property and the \p set routine + * returns an error value. The \p set routine will be called for + * the initial value. + * + * \b Note: The \p set callback function may be useful to range + * check the value being set for the property or may perform some + * transformation or translation of the value set. The \p get + * callback would then reverse the transformation or translation. + * A single \p get or \p set callback could handle multiple + * properties by performing different actions based on the + * property name or other properties in the property list. + * + * The \p get routine is called when a value is retrieved from + * a property value. The #H5P_prp_get_func_t callback function + * is defined as follows: + * + * \snippet this H5P_prp_cb2_t_snip + * + * The parameters to the above callback function are: + * + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list being queried</td> + * </tr> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property being queried</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN: The value of the property being returned</td> + * </tr> + * </table> + * + * The \p get routine may modify the value to be returned from + * the query and those changes will be preserved. If the \p get + * routine returns a negative value, the query routine returns + * an error value. + * + * The \p prp_del routine is called when a property is being + * deleted from a property list. The #H5P_prp_delete_func_t + * callback function is defined as follows: + * + * \snippet this H5P_prp_cb2_t_snip + * + * The parameters to the above callback function are: + * + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list the property is + * being deleted from</td> + * </tr> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property in the list</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN: The value for the property being deleted</td> + * </tr> + * </table> + * + * The \p prp_del routine may modify the value passed in, but the + * value is not used by the library when the \p prp_del routine + * returns. If the \p prp_del routine returns a negative value, + * the property list \p prp_del routine returns an error value but + * the property is still deleted. + * + * The \p copy routine is called when a new property list with + * this property is being created through a \p copy operation. + * + * The #H5P_prp_copy_func_t callback function is defined as follows: + * + * \snippet this H5P_prp_cb1_t_snip + * + * The parameters to the above callback function are: + * <table> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property being copied</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN/OUT: The value for the property being copied</td> + * </tr> + * </table> + * + * The \p copy routine may modify the value to be set and those + * changes will be stored as the new value of the property. If the + * \p copy routine returns a negative value, the new property value + * is not copied into the property and the copy routine returns an + * error value. + * + * The \p compare routine is called when a property list with this + * property is compared to another property list with the same + * property. + * + * The #H5P_prp_compare_func_t callback function is defined as + * follows: + * + * \snippet this H5P_prp_compare_func_t_snip + * + * The parameters to the callback function are defined as follows: + * + * <table> + * <tr> + * <td>\Code{const void * value1}</td> + * <td>IN: The value of the first property to compare</td> + * </tr> + * <tr> + * <td>\Code{const void * value2}</td> + * <td>IN: The value of the second property to compare</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * </table> + * + * The \p compare routine may not modify the values. The \p compare + * routine should return a positive value if \p value1 is greater + * than \p value2, a negative value if \p value2 is greater than + * \p value1 and zero if \p value1 and \p value2 are equal. + * + * The \p close routine is called when a property list with this + * property is being closed. + * + * The #H5P_prp_close_func_t callback function is defined as follows: + * \snippet this H5P_prp_cb1_t_snip + * + * The parameters to the callback function are defined as follows: + * + * <table> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property in the list</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN: The value for the property being closed</td> + * </tr> + * </table> + * + * The \p close routine may modify the value passed in, the + * value is not used by the library when the close routine + * returns. If the \p close routine returns a negative value, + * the property list \p close routine returns an error value + * but the property list is still closed. + * + * \b Note: There is no \p create callback routine for temporary + * property list objects; the initial value is assumed to + * have any necessary setup already performed on it. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pinsert2(hid_t plist_id, const char *name, size_t size, void *value, H5P_prp_set_func_t set, + H5P_prp_get_func_t get, H5P_prp_delete_func_t prp_del, H5P_prp_copy_func_t copy, + H5P_prp_compare_func_t compare, H5P_prp_close_func_t close); +/** + * \ingroup GPLOA + * + * \brief Determines whether a property list is a member of a class + * + * \plist_id + * \plistcls_id{pclass_id} + * + * \return \htri_t + * + * \details H5Pisa_class() checks to determine whether the property list + * \p plist_id is a member of the property list class + * \p pclass_id. + * + * \see H5Pcreate() + * + * \since 1.6.0 + * + */ H5_DLL htri_t H5Pisa_class(hid_t plist_id, hid_t pclass_id); -H5_DLL int H5Piterate(hid_t id, int *idx, H5P_iterate_t iter_func, void *iter_data); -H5_DLL herr_t H5Pcopy_prop(hid_t dst_id, hid_t src_id, const char *name); +/** + * \ingroup GPLOA + * + * \brief Iterates over properties in a property class or list + * + * \param[in] id Identifier of property object to iterate over + * \param[in,out] idx Index of the property to begin with + * \param[in] iter_func Function pointer to function to be called + * with each property iterated over + * \param[in,out] iter_data Pointer to iteration data from user + * + * \return On success: the return value of the last call to \p iter_func if + * it was non-zero; zero if all properties have been processed. + * On Failure, a negative value + * + * \details H5Piterate() iterates over the properties in the property + * object specified in \p id, which may be either a property + * list or a property class, performing a specified operation + * on each property in turn. + * + * For each property in the object, \p iter_func and the + * additional information specified below are passed to the + * #H5P_iterate_t operator function. + * + * The iteration begins with the \p idx-th property in the + * object; the next element to be processed by the operator + * is returned in \p idx. If \p idx is NULL, the iterator + * starts at the first property; since no stopping point is + * returned in this case, the iterator cannot be restarted if + * one of the calls to its operator returns non-zero. + * + * The prototype for the #H5P_iterate_t operator is as follows: + * \snippet this H5P_iterate_t_snip + * + * The operation receives the property list or class + * identifier for the object being iterated over, \p id, the + * name of the current property within the object, \p name, + * and the pointer to the operator data passed in to H5Piterate(), + * \p iter_data. The valid return values from an operator are + * as follows: + * + * <table> + * <tr> + * <td>Zero</td> + * <td>Causes the iterator to continue, returning zero when all + * properties have been processed</td> + * </tr> + * <tr> + * <td>Positive</td> + * <td>Causes the iterator to immediately return that positive + * value, indicating short-circuit success. The iterator + * can be restarted at the index of the next property</td> + * </tr> + * <tr> + * <td>Negative</td> + * <td>Causes the iterator to immediately return that value, + * indicating failure. The iterator can be restarted at the + * index of the next property</td> + * </tr> + * </table> + * H5Piterate() assumes that the properties in the object + * identified by \p id remain unchanged through the iteration. + * If the membership changes during the iteration, the function's + * behavior is undefined. + * + * \since 1.4.0 + * + */ +H5_DLL int H5Piterate(hid_t id, int *idx, H5P_iterate_t iter_func, void *iter_data); +/** + * \ingroup GPLOA + * + * \brief Registers a permanent property with a property list class + * + * \plistcls_id{cls_id} + * \param[in] name Name of property to register + * \param[in] size Size of property in bytes + * \param[in] def_value Default value for property in newly created + * property lists + * \param[in] create Callback routine called when a property list is + * being created and the property value will be + * initialized + * \param[in] set Callback routine called before a new value is + * copied into the property's value + * \param[in] get Callback routine called when a property value is + * retrieved from the property + * \param[in] prp_del Callback routine called when a property is deleted + * from a property list + * \param[in] copy Callback routine called when a property is copied + * from a property list + * \param[in] compare Callback routine called when a property is compared + * with another property list + * \param[in] close Callback routine called when a property list is + * being closed and the property value will be + * disposed of + * + * \return \herr_t + * + * \details H5Pregister2() registers a new property with a property list + * class. The \p cls_id identifier can be obtained by calling + * H5Pcreate_class(). The property will exist in all property + * list objects of \p cl_id created after this routine finishes. The + * name of the property must not already exist, or this routine + * will fail. The default property value must be provided and all + * new property lists created with this property will have the + * property value set to the default value. Any of the callback + * routines may be set to NULL if they are not needed. + * + * Zero-sized properties are allowed and do not store any data in + * the property list. These may be used as flags to indicate the + * presence or absence of a particular piece of information. The + * default pointer for a zero-sized property may be set to NULL. + * The property \p create and \p close callbacks are called for + * zero-sized properties, but the \p set and \p get callbacks are + * never called. + * + * The \p create routine is called when a new property list with + * this property is being created. The #H5P_prp_create_func_t + * callback function is defined as follows: + * + * \snippet this H5P_prp_cb1_t_snip + * + * The parameters to this callback function are defined as follows: + * + * <table> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property being modified</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN/OUT: The default value for the property being created, + * which will be passed to H5Pregister2()</td> + * </tr> + * </table> + * + * The \p create routine may modify the value to be set and those + * changes will be stored as the initial value of the property. + * If the \p create routine returns a negative value, the new + * property value is not copied into the property and the + * \p create routine returns an error value. + * + * The \p set routine is called before a new value is copied into + * the property. The #H5P_prp_set_func_t callback function is defined + * as follows: + * + * \snippet this H5P_prp_cb2_t_snip + * + * The parameters to this callback function are defined as follows: + * + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list being modified</td> + * </tr> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property being modified</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void *value}</td> + * <td>IN/OUT: Pointer to new value pointer for the property + * being modified</td> + * </tr> + * </table> + * + * The \p set routine may modify the value pointer to be set and + * those changes will be used when setting the property's value. + * If the \p set routine returns a negative value, the new property + * value is not copied into the property and the \p set routine + * returns an error value. The \p set routine will not be called + * for the initial value; only the \p create routine will be called. + * + * \b Note: The \p set callback function may be useful to range + * check the value being set for the property or may perform some + * transformation or translation of the value set. The \p get + * callback would then reverse the transformation or translation. + * A single \p get or \p set callback could handle multiple + * properties by performing different actions based on the property + * name or other properties in the property list. + * + * The \p get routine is called when a value is retrieved from a + * property value. The #H5P_prp_get_func_t callback function is + * defined as follows: + * + * \snippet this H5P_prp_cb2_t_snip + * + * The parameters to the callback function are defined as follows: + * + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list being + * queried</td> + * </tr> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property being queried</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN/OUT: The value of the property being returned</td> + * </tr> + * </table> + * + * The \p get routine may modify the value to be returned from the + * query and those changes will be returned to the calling routine. + * If the \p set routine returns a negative value, the query + * routine returns an error value. + * + * The \p prp_del routine is called when a property is being + * deleted from a property list. The #H5P_prp_delete_func_t + * callback function is defined as follows: + * + * \snippet this H5P_prp_cb2_t_snip + * + * The parameters to the callback function are defined as follows: + * + * <table> + * <tr> + * <td>\ref hid_t \c prop_id</td> + * <td>IN: The identifier of the property list the property is + * being deleted from</td> + * </tr> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property in the list</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN: The value for the property being deleted</td> + * </tr> + * </table> + * + * The \p prp_del routine may modify the value passed in, but the + * value is not used by the library when the \p prp_del routine + * returns. If the \p prp_del routine returns a negative value, + * the property list delete routine returns an error value but + * the property is still deleted. + * + * The \p copy routine is called when a new property list with + * this property is being created through a \p copy operation. + * The #H5P_prp_copy_func_t callback function is defined as follows: + * + * \snippet this H5P_prp_cb1_t_snip + * + * The parameters to the callback function are defined as follows: + * + * <table> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property being copied</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN/OUT: The value for the property being copied</td> + * </tr> + * </table> + * + * The \p copy routine may modify the value to be set and those + * changes will be stored as the new value of the property. If + * the \p copy routine returns a negative value, the new + * property value is not copied into the property and the \p copy + * routine returns an error value. + * + * The \p compare routine is called when a property list with this + * property is compared to another property list with the same + * property. The #H5P_prp_compare_func_t callback function is + * defined as follows: + * + * \snippet this H5P_prp_compare_func_t_snip + * + * The parameters to the callback function are defined as follows: + * + * <table> + * <tr> + * <td>\Code{const void * value1}</td> + * <td>IN: The value of the first property to compare</td> + * </tr> + * <tr> + * <td>\Code{const void * value2}</td> + * <td>IN: The value of the second property to compare</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * </table> + * + * The \p compare routine may not modify the values. The \p compare + * routine should return a positive value if \p value1 is greater + * than \p value2, a negative value if \p value2 is greater than + * \p value1 and zero if \p value1 and \p value2 are equal. + * + * The \p close routine is called when a property list with this + * property is being closed. The #H5P_prp_close_func_t callback + * function is defined as follows: + * + * \snippet this H5P_prp_cb1_t_snip + * + * The parameters to the callback function are defined as follows: + * + * <table> + * <tr> + * <td>\Code{const char * name}</td> + * <td>IN: The name of the property in the list</td> + * </tr> + * <tr> + * <td>\Code{size_t size}</td> + * <td>IN: The size of the property in bytes</td> + * </tr> + * <tr> + * <td>\Code{void * value}</td> + * <td>IN: The value for the property being closed</td> + * </tr> + * </table> + * + * The \p close routine may modify the value passed in, but the + * value is not used by the library when the \p close routine returns. + * If the \p close routine returns a negative value, the property + * list close routine returns an error value but the property list is + * still closed. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pregister2(hid_t cls_id, const char *name, size_t size, void *def_value, + H5P_prp_create_func_t create, H5P_prp_set_func_t set, H5P_prp_get_func_t get, + H5P_prp_delete_func_t prp_del, H5P_prp_copy_func_t copy, + H5P_prp_compare_func_t compare, H5P_prp_close_func_t close); +/** + * \ingroup GPLOA + * + * \brief Removes a property from a property list + * + * \plist_id + * \param[in] name Name of property to remove + * + * \return \herr_t + * + * \details H5Premove() removes a property from a property list. Both + * properties which were in existence when the property list was + * created (i.e. properties registered with H5Pregister()) and + * properties added to the list after it was created (i.e. added + * with H5Pinsert1() may be removed from a property list. + * Properties do not need to be removed from a property list + * before the list itself is closed; they will be released + * automatically when H5Pclose() is called. + * + * If a \p close callback exists for the removed property, it + * will be called before the property is released. + * + * \since 1.4.0 + * + */ H5_DLL herr_t H5Premove(hid_t plist_id, const char *name); +/** + * \ingroup GPLOA + * + * \brief Sets a property list value + * + * \plist_id + * \param[in] name Name of property to modify + * \param[in] value Pointer to value to set the property to + * + * \return \herr_t + * + * \details H5Pset() sets a new value for a property in a property list. + * If there is a \p set callback routine registered for this + * property, the \p value will be passed to that routine and any + * changes to the \p value will be used when setting the property + * value. The information pointed to by the \p value pointer + * (possibly modified by the \p set callback) is copied into the + * property list value and may be changed by the application + * making the H5Pset() call without affecting the property value. + * + * The property name must exist or this routine will fail. + * + * If the \p set callback routine returns an error, the property + * value will not be modified. + * + * This routine may not be called for zero-sized properties and + * will return an error in that case. + * + * \since 1.4.0 + * + */ +H5_DLL herr_t H5Pset(hid_t plist_id, const char *name, const void *value); +/** + * \ingroup GPLOA + * + * \brief Removes a property from a property list class + * + * \plistcls_id{pclass_id} + * \param[in] name Name of property to remove + * + * \return \herr_t + * + * \details H5Punregister() removes a property from a property list class. + * Future property lists created of that class will not contain + * this property; existing property lists containing this property + * are not affected. + * + * \since 1.4.0 + * + */ H5_DLL herr_t H5Punregister(hid_t pclass_id, const char *name); -H5_DLL herr_t H5Pclose_class(hid_t plist_id); -H5_DLL herr_t H5Pclose(hid_t plist_id); -H5_DLL hid_t H5Pcopy(hid_t plist_id); /* Object creation property list (OCPL) routines */ -H5_DLL herr_t H5Pset_attr_phase_change(hid_t plist_id, unsigned max_compact, unsigned min_dense); -H5_DLL herr_t H5Pget_attr_phase_change(hid_t plist_id, unsigned *max_compact, unsigned *min_dense); -H5_DLL herr_t H5Pset_attr_creation_order(hid_t plist_id, unsigned crt_order_flags); + +/** + * \ingroup DCPL + * + * \brief Verifies that all required filters are available + * + * \plist_id + * + * \return \htri_t + * + * \details H5Pall_filters_avail() verifies that all of the filters set in + * the dataset or group creation property list \p plist_id are + * currently available. + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * \since 1.6.0 + * + */ +H5_DLL htri_t H5Pall_filters_avail(hid_t plist_id); +/** + * \ingroup OCPL + * + * \brief Retrieves tracking and indexing settings for attribute creation + * order + * + * \plist_id + * \param[out] crt_order_flags Flags specifying whether to track and + * index attribute creation order + * + * \return \herr_t + * + * \details H5Pget_attr_creation_order() retrieves the settings for + * tracking and indexing attribute creation order on an object. + * + * \p plist_id is an object creation property list (\p ocpl), + * as it can be a dataset or group creation property list + * identifier. The term \p ocpl is used when different types + * of objects may be involved. + * + * \p crt_order_flags returns flags with the following meanings: + * + * <table> + * <tr> + * <td>#H5P_CRT_ORDER_TRACKED</td> + * <td>Attribute creation order is tracked but not necessarily + * indexed.</td> + * </tr> + * <tr> + * <td>#H5P_CRT_ORDER_INDEXED </td> + * <td>Attribute creation order is indexed (requires + * #H5P_CRT_ORDER_TRACKED).</td> + * </tr> + * </table> + * + * If \p crt_order_flags is returned with a value of 0 (zero), + * attribute creation order is neither tracked nor indexed. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pget_attr_creation_order(hid_t plist_id, unsigned *crt_order_flags); -H5_DLL herr_t H5Pset_obj_track_times(hid_t plist_id, hbool_t track_times); +/** + * \ingroup OCPL + * + * \brief Retrieves attribute storage phase change thresholds + * + * \plist_id + * \param[out] max_compact Maximum number of attributes to be stored in + * compact storage (Default: 8) + * \param[out] min_dense Minimum number of attributes to be stored in + * dense storage (Default: 6) + * + * \return \herr_t + * + * \details H5Pget_attr_phase_change() retrieves threshold values for + * attribute storage on an object. These thresholds determine the + * point at which attribute storage changes from compact storage + * (i.e., storage in the object header) to dense storage (i.e., + * storage in a heap and indexed with a B-tree). + * + * In the general case, attributes are initially kept in compact + * storage. When the number of attributes exceeds \p max_compact, + * attribute storage switches to dense storage. If the number of + * attributes subsequently falls below \p min_dense, the + * attributes are returned to compact storage. + * + * If \p max_compact is set to 0 (zero), dense storage always used. + * + * \p plist_id is an object creation property list (\p ocpl), as it + * can be a dataset or group creation property list identifier. + * The term \p ocpl is used when different types of objects may be + * involved. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_attr_phase_change(hid_t plist_id, unsigned *max_compact, unsigned *min_dense); +/** + * \ingroup OCPL + * + * \brief Returns information about a filter in a pipeline + * + * \todo Signature for H5Pget_filter2 is different in H5Pocpl.c than in + * H5Ppublic.h + * + * \ocpl_id{plist_id} + * \param[in] idx Sequence number within the filter pipeline of the filter + * for which information is sought + * \param[out] flags Bit vector specifying certain general properties of the + * filter + * \param[in,out] cd_nelmts Number of elements in \p cd_values + * \param[out] cd_values Auxiliary data for the filter + * \param[in] namelen Anticipated number of characters in \p name + * \param[out] name Name of the filter + * \param[out] filter_config Bit field, as described in H5Zget_filter_info() + * + * \return Returns a negative value on failure, and the filter identifier + * if successful (see #H5Z_filter_t): + * - #H5Z_FILTER_DEFLATE Data compression filter, + * employing the gzip algorithm + * - #H5Z_FILTER_SHUFFLE Data shuffling filter + * - #H5Z_FILTER_FLETCHER32 Error detection filter, employing the + * Fletcher32 checksum algorithm + * - #H5Z_FILTER_SZIP Data compression filter, employing the + * SZIP algorithm + * - #H5Z_FILTER_NBIT Data compression filter, employing the + * N-bit algorithm + * - #H5Z_FILTER_SCALEOFFSET Data compression filter, employing the + * scale-offset algorithm + * + * \details H5Pget_filter2() returns information about a filter specified by + * its filter number, in a filter pipeline specified by the property + * list with which it is associated. + * + * \p plist_id must be a dataset or group creation property list. + * + * \p idx is a value between zero and N-1, as described in + * H5Pget_nfilters(). The function will return a negative value if + * the filter number is out of range. + * + * The structure of the \p flags argument is discussed in + * H5Pset_filter(). + * + * On input, \p cd_nelmts indicates the number of entries in the + * \p cd_values array, as allocated by the caller; on return, + * \p cd_nelmts contains the number of values defined by the filter. + * + * If \p name is a pointer to an array of at least \p namelen bytes, + * the filter name will be copied into that array. The name will be + * null terminated if \p namelen is large enough. The filter name + * returned will be the name appearing in the file, the name + * registered for the filter, or an empty string. + * + * \p filter_config is the bit field described in + * H5Zget_filter_info(). + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * \since 1.8.0 + * + */ +H5_DLL H5Z_filter_t H5Pget_filter2(hid_t plist_id, unsigned idx, unsigned int *flags /*out*/, + size_t *cd_nelmts /*out*/, unsigned cd_values[] /*out*/, size_t namelen, + char name[], unsigned *filter_config /*out*/); +/** + * \ingroup OCPL + * + * \brief Returns information about the specified filter + * + * \ocpl_id{plist_id} + * \param[in] filter_id Filter identifier + * \param[out] flags Bit vector specifying certain general + * properties of the filter + * \param[in,out] cd_nelmts Number of elements in \p cd_values + * \param[out] cd_values[] Auxiliary data for the filter + * \param[in] namelen Length of filter name and number of + * elements in \p name + * \param[out] name[] Name of filter + * \param[out] filter_config Bit field, as described in + * H5Zget_filter_info() + * + * \return \herr_t + * + * \details H5Pget_filter_by_id2() returns information about the filter + * specified in \p filter_id, a filter identifier. + * + * \p plist_id must be a dataset or group creation property list + * and \p filter_id must be in the associated filter pipeline. + * + * The \p filter_id and \p flags parameters are used in the same + * manner as described in the discussion of H5Pset_filter(). + * + * Aside from the fact that they are used for output, the + * parameters \p cd_nelmts and \p cd_values[] are used in the same + * manner as described in the discussion of H5Pset_filter(). On + * input, the \p cd_nelmts parameter indicates the number of + * entries in the \p cd_values[] array allocated by the calling + * program; on exit it contains the number of values defined by + * the filter. + * + * On input, the \p namelen parameter indicates the number of + * characters allocated for the filter name by the calling program + * in the array \p name[]. On exit \p name[] contains the name of the + * filter with one character of the name in each element of the + * array. + * + * \p filter_config is the bit field described in + * H5Zget_filter_info(). + * + * If the filter specified in \p filter_id is not set for the + * property list, an error will be returned and + * H5Pget_filter_by_id2() will fail. + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_filter_by_id2(hid_t plist_id, H5Z_filter_t filter_id, unsigned int *flags /*out*/, + size_t *cd_nelmts /*out*/, unsigned cd_values[] /*out*/, size_t namelen, + char name[] /*out*/, unsigned *filter_config /*out*/); +/** + * \ingroup OCPL + * + * \brief Returns the number of filters in the pipeline + * + * \ocpl_id{plist_id} + * + * \return Returns the number of filters in the pipeline if successful; + * otherwise returns a negative value. + * + * \details H5Pget_nfilters() returns the number of filters defined in the + * filter pipeline associated with the property list \p plist_id. + * + * In each pipeline, the filters are numbered from 0 through \Code{N-1}, + * where \c N is the value returned by this function. During output to + * the file, the filters are applied in increasing order; during + * input from the file, they are applied in decreasing order. + * + * H5Pget_nfilters() returns the number of filters in the pipeline, + * including zero (0) if there are none. + * + * \since 1.0.0 + * + */ +H5_DLL int H5Pget_nfilters(hid_t plist_id); +/** + * \ingroup OCPL + * + * \brief Determines whether times associated with an object + * are being recorded + * + * \plist_id + * \param[out] track_times Boolean value, 1 (TRUE) or 0 (FALSE), + * specifying whether object times are being recorded + * + * \return \herr_t + * + * \details H5Pget_obj_track_times() queries the object creation property + * list, \p plist_id, to determine whether object times are being + * recorded. + * + * If \p track_times is returned as 1, times are being recorded; + * if \p track_times is returned as 0, times are not being + * recorded. + * + * Time data can be retrieved with H5Oget_info(), which will return + * it in the #H5O_info_t struct. + * + * If times are not tracked, they will be reported as follows + * when queried: 12:00 AM UDT, Jan. 1, 1970 + * + * See H5Pset_obj_track_times() for further discussion. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pget_obj_track_times(hid_t plist_id, hbool_t *track_times); +/** + * \ingroup OCPL + * + * \brief Modifies a filter in the filter pipeline + * + * \ocpl_id{plist_id} + * \param[in] filter Filter to be modified + * \param[in] flags Bit vector specifying certain general properties + * of the filter + * \param[in] cd_nelmts Number of elements in \p cd_values + * \param[in] cd_values[] Auxiliary data for the filter + * + * \return \herr_t + * + * \details H5Pmodify_filter() modifies the specified \p filter in the + * filter pipeline. \p plist_id must be a dataset or group + * creation property list. + * + * The \p filter, \p flags \p cd_nelmts[], and \p cd_values + * parameters are used in the same manner and accept the same + * values as described in the discussion of H5Pset_filter(). + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * \since 1.6.0 + * + */ H5_DLL herr_t H5Pmodify_filter(hid_t plist_id, H5Z_filter_t filter, unsigned int flags, size_t cd_nelmts, const unsigned int cd_values[/*cd_nelmts*/]); +/** + * \ingroup OCPL + * + * \brief Delete one or more filters in the filter pipeline + * + * \ocpl_id{plist_id} + * \param[in] filter Filter to be deleted + * + * \return \herr_t + * + * \details H5Premove_filter() removes the specified \p filter from the + * filter pipeline in the dataset or group creation property + * list \p plist_id. + * + * The \p filter parameter specifies the filter to be removed. + * Valid values for use in \p filter are as follows: + * + * <table> + * <tr> + * <td>#H5Z_FILTER_ALL</td> + * <td>Removes all filters from the filter pipeline</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_DEFLATE</td> + * <td>Data compression filter, employing the gzip + * algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_SHUFFLE</td> + * <td>Data shuffling filter</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_FLETCHER32</td> + * <td>Error detection filter, employing the Fletcher32 + * checksum algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_SZIP</td> + * <td>Data compression filter, employing the SZIP + * algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_NBIT</td> + * <td>Data compression filter, employing the N-Bit + * algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_SCALEOFFSET</td> + * <td>Data compression filter, employing the scale-offset + * algorithm</td> + * </tr> + * </table> + * + * Additionally, user-defined filters can be removed with this + * routine by passing the filter identifier with which they were + * registered with the HDF5 library. + * + * Attempting to remove a filter that is not in the filter + * pipeline is an error. + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * \since 1.6.3 + * + */ +H5_DLL herr_t H5Premove_filter(hid_t plist_id, H5Z_filter_t filter); +/** + * \ingroup OCPL + * + * \brief Sets tracking and indexing of attribute creation order + * + * \plist_id + * \param[in] crt_order_flags Flags specifying whether to track and index + * attribute creation order. \em Default: No + * flag set; attribute creation order is neither + * tracked not indexed + * + * \return \herr_t + * + * \details H5Pset_attr_creation_order() sets flags for tracking and + * indexing attribute creation order on an object. + * + * \p plist_id is a dataset or group creation property list + * identifier. + * + * \p crt_order_flags contains flags with the following meanings: + * + * <table> + * <tr> + * <td>#H5P_CRT_ORDER_TRACKED</td> + * <td>Attribute creation order is tracked but not necessarily + * indexed.</td> + * </tr> + * <tr> + * <td>#H5P_CRT_ORDER_INDEXED </td> + * <td>Attribute creation order is indexed (requires + * #H5P_CRT_ORDER_TRACKED).</td> + * </tr> + * </table> + * + * Default behavior is that attribute creation order is neither + * tracked nor indexed. + * + * H5Pset_attr_creation_order() can be used to set attribute + * creation order tracking, or to set attribute creation order + * tracking and indexing. + * + * \note If a creation order index is to be built, it must be specified in + * the object creation property list. HDF5 currently provides no + * mechanism to turn on attribute creation order tracking at object + * creation time and to build the index later. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_attr_creation_order(hid_t plist_id, unsigned crt_order_flags); +/** + * \ingroup OCPL + * + * \brief Sets attribute storage phase change thresholds + * + * \plist_id + * \param[in] max_compact Maximum number of attributes to be stored in + * compact storage (\em Default: 8); must be greater + * than or equal to \p min_dense + * + * \param[in] min_dense Minimum number of attributes to be stored in + * dense storage (\em Default: 6) + * + * \return \herr_t + * + * \details H5Pset_attr_phase_change() sets threshold values for attribute + * storage on an object. These thresholds determine the point at + * which attribute storage changes from compact storage (i.e., + * storage in the object header) to dense storage (i.e., storage + * in a heap and indexed with a B-tree). + * + * In the general case, attributes are initially kept in compact + * storage. When the number of attributes exceeds \p max_compact, + * attribute storage switches to dense storage. If the number of + * attributes subsequently falls below \p min_dense, the attributes + * are returned to compact storage. + * + * If \p max_compact is set to 0 (zero), dense storage is always + * used. \p min_dense must be set to 0 (zero) when \p max_compact + * is 0 (zero). + * + * \p plist_id is a dataset or group creation property list + * identifier. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_attr_phase_change(hid_t plist_id, unsigned max_compact, unsigned min_dense); +/** + * \ingroup OCPL + * + * \brief Sets deflate (GNU gzip) compression method and compression level + * + * \ocpl_id{plist_id} + * \param[in] level Compression level + * + * \return \herr_t + * + * \details H5Pset_deflate() sets the deflate compression method and the + * compression level, \p level, for a dataset or group creation + * property list, \p plist_id. + * + * The filter identifier set in the property list is + * #H5Z_FILTER_DEFLATE. + * + * The compression level, \p level, is a value from zero to nine, + * inclusive. A compression level of 0 (zero) indicates no + * compression; compression improves but speed slows progressively + * from levels 1 through 9: + * + * <table> + * <tr> + * <th>Compression Level</th> + * <th>Gzip Action</th> + * </tr> + * <tr> + * <td>0</td> + * <td>No compression</td> + * </tr> + * <tr> + * <td>1</td> + * <td>Best compression speed; least compression</td> + * </tr> + * <tr> + * <td>2 through 8</td> + * <td>Compression improves; speed degrades</td> + * </tr> + * <tr> + * <td>9</td> + * <td>Best compression ratio; slowest speed</td> + * </tr> + * </table> + * + * Note that setting the compression level to 0 (zero) does not turn + * off use of the gzip filter; it simply sets the filter to perform + * no compression as it processes the data. + * + * HDF5 relies on GNU gzip for this compression. + * + * \version 1.8.5 Function extended to work with group creation property lists. + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_deflate(hid_t plist_id, unsigned level); +/** + * \ingroup OCPL + * + * \brief Adds a filter to the filter pipeline + * + * \ocpl_id{plist_id} + * \param[in] filter Filter identifier for the filter to be added to the + * pipeline + * \param[in] flags Bit vector specifying certain general properties of + * the filter + * \param[in] cd_nelmts Number of elements in \p c_values + * \param[in] c_values Auxiliary data for the filter + * + * \return \herr_t + * + * \details H5Pset_filter() adds the specified \p filter identifier and + * corresponding properties to the end of an output filter + * pipeline. + * + * \p plist_id must be either a dataset creation property list or + * group creation property list identifier. If \p plist_id is a + * dataset creation property list identifier, the filter is added + * to the raw data filter pipeline. + * + * If \p plist_id is a group creation property list identifier, + * the filter is added to the link filter pipeline, which filters + * the fractal heap used to store most of the link metadata in + * certain types of groups. The only predefined filters that can + * be set in a group creation property list are the gzip filter + * (#H5Z_FILTER_DEFLATE) and the Fletcher32 error detection filter + * (#H5Z_FILTER_FLETCHER32). + * + * The array \p c_values contains \p cd_nelmts integers which are + * auxiliary data for the filter. The integer values will be + * stored in the dataset object header as part of the filter + * information. + * + * The \p flags argument is a bit vector with the following + * fields specifying certain general properties of the filter: + * + * <table> + * <tr> + * <td>#H5Z_FLAG_OPTIONAL</td> + * <td>If this bit is set then the filter is optional. If the + * filter fails (see below) during an H5Dwrite() operation + * then the filter is just excluded from the pipeline for + * the chunk for which it failed; the filter will not + * participate in the pipeline during an H5Dread() of the + * chunk. This is commonly used for compression filters: + * if the filter result would be larger than the input, + * then the compression filter returns failure and the + * uncompressed data is stored in the file.<br /><br /> + * This flag should not be set for the Fletcher32 checksum + * filter as it will bypass the checksum filter without + * reporting checksum errors to an application.</td> + * </tr> + * <tr> + * <td>#H5Z_FLAG_MANDATORY</td> + * <td>If the filter is required, that is, set to mandatory, + * and the filter fails, the library’s behavior depends + * on whether the chunk cache is in use: + * \li If the chunk cache is enabled, data chunks will + * be flushed to the file during H5Dclose() and the + * library will return the failure in H5Dclose(). + * \li When the chunk cache is disabled or not big enough, + * or the chunk is being evicted from the cache, the + * failure will happen during H5Dwrite(). + * + * In each case, the library will still write to the file + * all data chunks that were processed by the filter + * before the failure occurred.<br /><br /> + * For example, assume that an application creates a + * dataset of four chunks, the chunk cache is enabled and + * is big enough to hold all four chunks, and the filter + * fails when it tries to write the fourth chunk. The + * actual flush of the chunks will happen during + * H5Dclose(), not H5Dwrite(). By the time H5Dclose() + * fails, the first three chunks will have been written + * to the file. Even though H5Dclose() fails, all the + * resources will be released and the file can be closed + * properly. <br /><br /> + * If, however, the filter fails on the second chunk, only + * the first chunk will be written to the file as nothing + * further can be written once the filter fails.</td> + * </tr> + * </table> + * The \p filter parameter specifies the filter to be set. Valid + * pre-defined filter identifiers are as follows: + * + * <table> + * <tr> + * <td>#H5Z_FILTER_DEFLATE</td> + * <td>Data compression filter, employing the gzip + * algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_SHUFFLE</td> + * <td>Data shuffling filter</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_FLETCHER32</td> + * <td>Error detection filter, employing the Fletcher32 + * checksum algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_SZIP</td> + * <td>Data compression filter, employing the SZIP + * algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_NBIT</td> + * <td>Data compression filter, employing the N-Bit + * algorithm</td> + * </tr> + * <tr> + * <td>#H5Z_FILTER_SCALEOFFSET</td> + * <td>Data compression filter, employing the scale-offset + * algorithm</td> + * </tr> + * </table> + * Also see H5Pset_edc_check() and H5Pset_filter_callback(). + * + * \note When a non-empty filter pipeline is used with a group creation + * property list, the group will be created with the new group file + * format. The filters will come into play only when dense storage + * is used (see H5Pset_link_phase_change()) and will be applied to + * the group’s fractal heap. The fractal heap will contain most of + * the the group’s link metadata, including link names. + * + * \note When working with group creation property lists, if you are + * adding a filter that is not in HDF5’s set of predefined filters, + * i.e., a user-defined or third-party filter, you must first + * determine that the filter will work for a group. See the + * discussion of the set local and can apply callback functions + * in H5Zregister(). + * + * \note If multiple filters are set for a property list, they will be + * applied to each chunk of raw data for datasets or each block + * of the fractal heap for groups in the order in which they were + * set. + * + * \note Filters can be applied only to chunked datasets; they cannot be + * used with other dataset storage methods, such as contiguous, + * compact, or external datasets. + * + * \note Dataset elements of variable-length and dataset region + * reference datatypes are stored in separate structures in the + * file called heaps. Filters cannot currently be applied to + * these heaps. + * + * \note <b>Filter Behavior in HDF5:</b><br /> + * Filters can be inserted into the HDF5 pipeline to perform + * functions such as compression and conversion. As such, they are + * a very flexible aspect of HDF5; for example, a user-defined + * filter could provide encryption for an HDF5 dataset. + * + * \note A filter can be declared as either required or optional. + * Required is the default status; optional status must be + * explicitly declared. + * + * \note A required filter that fails or is not defined causes an + * entire output operation to fail; if it was applied when the + * data was written, such a filter will cause an input operation + * to fail. + * + * \note The following table summarizes required filter behavior. + * <table> + * <tr> + * <th></th> + * <th>Required FILTER_X not available</th> + * <th>FILTER_X available</th> + * </tr> + * <tr> + * <td>H5Pset_<FILTER_X></td> + * <td>Will fail.</td> + * <td>Will succeed.</td> + * </tr> + * <tr> + * <td>H5Dwrite with FILTER_X set</td> + * <td>Will fail.</td> + * <td>Will succeed; FILTER_X will be applied to + * the data.</td> + * </tr> + * <tr> + * <td>H5Dread with FILTER_X set</td> + * <td>Will fail.</td> + * <td>Will succeed.</td> + * </tr> + * </table> + * \note An optional filter can be set for an HDF5 dataset even when + * the filter is not available. Such a filter can then be + * applied to the dataset when it becomes available on the + * original system or when the file containing the dataset is + * processed on a system on which it is available. + * + * \note A filter can be declared as optional through the use of the + * #H5Z_FLAG_OPTIONAL flag with H5Pset_filter(). + * + * \note Consider a situation where one is creating files that will + * normally be used only on systems where the optional (and + * fictional) filter FILTER_Z is routinely available. One can + * create those files on system A, which lacks FILTER_Z, create + * chunked datasets in the files with FILTER_Z defined in the + * dataset creation property list, and even write data to those + * datasets. The dataset object header will indicate that FILTER_Z + * has been associated with this dataset. But since system A does + * not have FILTER_Z, dataset chunks will be written without it + * being applied. + * + * \note HDF5 has a mechanism for determining whether chunks are + * actually written with the filters specified in the object + * header, so while the filter remains unavailable, system A will + * be able to read the data. Once the file is moved to system B, + * where FILTER_Z is available, HDF5 will apply FILTER_Z to any + * data rewritten or new data written in these datasets. Dataset + * chunks that have been written on system B will then be + * unreadable on system A; chunks that have not been re-written + * since being written on system A will remain readable on system + * A. All chunks will be readable on system B. + * + * \note The following table summarizes optional filter behavior. + * <table> + * <tr> + * <th></th> + * <th>FILTER_Z not available</th> + * <th>FILTER_Z available<br /> with encode and decode</th> + * <th>FILTER_Z available decode only</th> + * </tr> + * <tr> + * <td>H5Pset_<FILTER_Z></td> + * <td>Will succeed.</td> + * <td>Will succeed.</td> + * <td>Will succeed.</td> + * </tr> + * <tr> + * <td>H5Dread with FILTER_Z set</td> + * <td>Will succeed if FILTER_Z has not actually<br /> + * been applied to data.</td> + * <td>Will succeed.</td> + * <td>Will succeed.</td> + * </tr> + * <tr> + * <td>H5Dwrite with FILTER_Z set</td> + * <td>Will succeed;<br /> + * FILTER_Z will not be applied to the data.</td> + * <td>Will succeed;<br /> + * FILTER_Z will be applied to the data.</td> + * <td>Will succeed;<br /> + * FILTER_Z will not be applied to the data.</td> + * </tr> + * </table> + * \note The above principles apply generally in the use of HDF5 + * optional filters insofar as HDF5 does as much as possible to + * complete an operation when an optional filter is unavailable. + * (The SZIP filter is an exception to this rule; see H5Pset_szip() + * for details.) + * + * \see \ref_filter_pipe, \ref_group_impls + * + * \version 1.8.5 Function applied to group creation property lists. + * \since 1.6.0 + * + */ H5_DLL herr_t H5Pset_filter(hid_t plist_id, H5Z_filter_t filter, unsigned int flags, size_t cd_nelmts, const unsigned int c_values[]); -H5_DLL int H5Pget_nfilters(hid_t plist_id); -H5_DLL H5Z_filter_t H5Pget_filter2(hid_t plist_id, unsigned filter, unsigned int *flags /*out*/, - size_t *cd_nelmts /*out*/, unsigned cd_values[] /*out*/, size_t namelen, - char name[], unsigned *filter_config /*out*/); -H5_DLL herr_t H5Pget_filter_by_id2(hid_t plist_id, H5Z_filter_t id, unsigned int *flags /*out*/, - size_t *cd_nelmts /*out*/, unsigned cd_values[] /*out*/, size_t namelen, - char name[] /*out*/, unsigned *filter_config /*out*/); -H5_DLL htri_t H5Pall_filters_avail(hid_t plist_id); -H5_DLL herr_t H5Premove_filter(hid_t plist_id, H5Z_filter_t filter); -H5_DLL herr_t H5Pset_deflate(hid_t plist_id, unsigned aggression); -H5_DLL herr_t H5Pset_fletcher32(hid_t plist_id); +/** + * \ingroup OCPL + * + * \brief Sets up use of the Fletcher32 checksum filter + * + * \ocpl_id{plist_id} + * + * \return \herr_t + * + * \details H5Pset_fletcher32() sets the Fletcher32 checksum filter in the + * dataset or group creation property list \p plist_id. + * + * \attention The Fletcher32 EDC checksum filter was added in HDF5 Release + * 1.6.0. In the original implementation, however, the checksum + * value was calculated incorrectly on little-endian systems. + * The error was fixed in HDF5 Release 1.6.3. + * + * \attention As a result of this fix, an HDF5 library of Release 1.6.0 + * through Release 1.6.2 cannot read a dataset created or written + * with Release 1.6.3 or later if the dataset was created with + * the checksum filter and the filter is enabled in the reading + * library. (Libraries of Release 1.6.3 and later understand the + * earlier error and compensate appropriately.) + * + * \attention \b Work-around: An HDF5 library of Release 1.6.2 or earlier + * will be able to read a dataset created or written with the + * checksum filter by an HDF5 library of Release 1.6.3 or later + * if the checksum filter is disabled for the read operation. + * This can be accomplished via a call to H5Pset_edc_check() + * with the value #H5Z_DISABLE_EDC in the second parameter. + * This has the obvious drawback that the application will be + * unable to verify the checksum, but the data does remain + * accessible. + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * \version 1.6.3 Error in checksum calculation on little-endian systems + * corrected in this release. + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_fletcher32(hid_t plist_id); +/** + * \ingroup OCPL + * + * \brief Sets the recording of times associated with an object + * + * \param[in] plist_id Object creation property list identifier + * \param[in] track_times Boolean value, 1 or 0, specifying whether object + * times are to be tracked + * + * \return \herr_t + * + * \details H5Pset_obj_track_times() sets a property in the object creation + * property list, \p plist_id, that governs the recording of times + * associated with an object. + * + * If \p track_times is set to 1, time data will be recorded. If + * \p track_times is set to 0, time data will not be recorded. + * + * Time data can be retrieved with H5Oget_info(), which will + * return it in the #H5O_info_t struct. + * + * If times are not tracked, they will be reported as follows when queried: + * \Code{ 12:00 AM UDT, Jan. 1, 1970} + * + * That date and time are commonly used to represent the beginning of the UNIX epoch. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_obj_track_times(hid_t plist_id, hbool_t track_times); /* File creation property list (FCPL) routines */ -H5_DLL herr_t H5Pset_userblock(hid_t plist_id, hsize_t size); -H5_DLL herr_t H5Pget_userblock(hid_t plist_id, hsize_t *size); -H5_DLL herr_t H5Pset_sizes(hid_t plist_id, size_t sizeof_addr, size_t sizeof_size); -H5_DLL herr_t H5Pget_sizes(hid_t plist_id, size_t *sizeof_addr /*out*/, size_t *sizeof_size /*out*/); -H5_DLL herr_t H5Pset_sym_k(hid_t plist_id, unsigned ik, unsigned lk); -H5_DLL herr_t H5Pget_sym_k(hid_t plist_id, unsigned *ik /*out*/, unsigned *lk /*out*/); -H5_DLL herr_t H5Pset_istore_k(hid_t plist_id, unsigned ik); +/** + * \ingroup FCPL + * + * \brief Retrieves the file space page size for a file creation property + * list + * + * \fcpl_id{plist_id} + * \param[out] fsp_size File space page size + * + * \return \herr_t + * + * \details H5Pget_file_space_page_size() retrieves the file space page + * size for paged aggregation in the parameter \p fsp_size. + * + * The library default is 4KB (4096) if \p fsp_size is not + * previously set via a call to H5Pset_file_space_page_size(). + * + * \since 1.10.1 + * + */ +H5_DLL herr_t H5Pget_file_space_page_size(hid_t plist_id, hsize_t *fsp_size); +/** + * \ingroup FCPL + * + * \brief Retrieves the file space handling strategy, persisting free-space + * condition and threshold value for a file creation property list + * + * \fcpl_id{plist_id} + * \param[out] strategy The file space handling strategy + * \param[out] persist The boolean value indicating whether free space is + * persistent or not + * \param[out] threshold The free-space section size threshold value + * + * \return \herr_t + * + * \details H5Pget_file_space_strategy() retrieves the file space handling + * strategy, the persisting free-space condition and the threshold + * value in the parameters \p strategy, \p persist and + * \p threshold respectively. + * + * The library default values returned when + * H5Pset_file_space_strategy() has not been called are: + * + * \li \p strategy - #H5F_FSPACE_STRATEGY_FSM_AGGR + * \li \p persist - 0 + * \li \p threshold - 1 + * + * \since 1.10.1 + * + */ +H5_DLL herr_t H5Pget_file_space_strategy(hid_t plist_id, H5F_fspace_strategy_t *strategy, hbool_t *persist, + hsize_t *threshold); +/** + * \ingroup FCPL + * + * \brief Queries the 1/2 rank of an indexed storage B-tree + * + * \fcpl_id{plist_id} + * \param[out] ik Pointer to location to return the chunked storage B-tree + * 1/2 rank (<em>Default value of B-tree 1/2 rank: 32</em>) + * + * \return \herr_t + * + * \details H5Pget_istore_k() queries the 1/2 rank of an indexed storage + * B-tree. + * + * The argument \p ik may be the null pointer (NULL). + * This function is valid only for file creation property lists. + * + * \see H5Pset_istore_k() + * + * \version 1.6.4 \p ik parameter type changed to \em unsigned. + * \since 1.0.0 + * + */ H5_DLL herr_t H5Pget_istore_k(hid_t plist_id, unsigned *ik /*out*/); -H5_DLL herr_t H5Pset_shared_mesg_nindexes(hid_t plist_id, unsigned nindexes); -H5_DLL herr_t H5Pget_shared_mesg_nindexes(hid_t plist_id, unsigned *nindexes); -H5_DLL herr_t H5Pset_shared_mesg_index(hid_t plist_id, unsigned index_num, unsigned mesg_type_flags, - unsigned min_mesg_size); +/** + * \ingroup FCPL + * + * \brief Retrieves the configuration settings for a shared message index + * + * \fcpl_id{plist_id} + * \param[in] index_num Index being configured + * \param[out] mesg_type_flags Types of messages that may be stored in + * this index + * \param[out] min_mesg_size Minimum message size + * + * \return \herr_t + * + * \details H5Pget_shared_mesg_index() retrieves the message type and + * minimum message size settings from the file creation property + * list \p plist_id for the shared object header message index + * specified by \p index_num. + * + * \p index_num specifies the index. \p index_num is zero-indexed, + * so in a file with three indexes, they will be numbered 0, 1, + * and 2. + * + * \p mesg_type_flags and \p min_mesg_size will contain, + * respectively, the types of messages and the minimum size, in + * bytes, of messages that can be stored in this index. + * + * Valid message types are described in H5Pset_shared_mesg_index(). + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pget_shared_mesg_index(hid_t plist_id, unsigned index_num, unsigned *mesg_type_flags, unsigned *min_mesg_size); -H5_DLL herr_t H5Pset_shared_mesg_phase_change(hid_t plist_id, unsigned max_list, unsigned min_btree); +/** + * \ingroup FCPL + * + * \brief Retrieves the number of shared object header message indexes in file + * creation property list + * + * \fcpl_id{plist_id} + * \param[out] nindexes Number of shared object header message indexes + * available in files created with this property list + * + * \return \herr_t + * + * \details H5Pget_shared_mesg_nindexes() retrieves the number of shared + * object header message indexes in the specified file creation + * property list \p plist_id. + * + * If the value of \p nindexes is 0 (zero), shared object header + * messages are disabled in files created with this property list. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_shared_mesg_nindexes(hid_t plist_id, unsigned *nindexes); +/** + * \ingroup FCPL + * + * \brief Retrieves shared object header message phase change information + * + * \fcpl_id{plist_id} + * \param[out] max_list Threshold above which storage of a shared object + * header message index shifts from list to B-tree + * \param[out] min_btree Threshold below which storage of a shared object + * header message index reverts to list format + * + * \return \herr_t + * + * \details H5Pget_shared_mesg_phase_change() retrieves the threshold values + * for storage of shared object header message indexes in a file. + * These phase change thresholds determine the point at which the + * index storage mechanism changes from a more compact list format + * to a more performance-oriented B-tree format, and vice-versa. + * + * By default, a shared object header message index is initially + * stored as a compact list. When the number of messages in an + * index exceeds the specified \p max_list threshold, storage + * switches to a B-tree format for improved performance. If the + * number of messages subsequently falls below the \p min_btree + * threshold, the index will revert to the list format. + * + * If \p max_list is set to 0 (zero), shared object header message + * indexes in the file will always be stored as B-trees. + * + * \p plist_id specifies the file creation property list. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pget_shared_mesg_phase_change(hid_t plist_id, unsigned *max_list, unsigned *min_btree); +/** + * \ingroup FCPL + * + * \brief Retrieves the size of the offsets and lengths used in an HDF5 + * file + * + * \fcpl_id{plist_id} + * \param[out] sizeof_addr Pointer to location to return offset size in + * bytes + * \param[out] sizeof_size Pointer to location to return length size in + * bytes + * + * \return \herr_t + * + * \details H5Pget_sizes() retrieves the size of the offsets and lengths + * used in an HDF5 file. This function is only valid for file + * creation property lists. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pget_sizes(hid_t plist_id, size_t *sizeof_addr /*out*/, size_t *sizeof_size /*out*/); +/** + * \ingroup FCPL + * + * \brief Retrieves the size of the symbol table B-tree 1/2 rank and the + * symbol table leaf node 1/2 size + * + * \fcpl_id{plist_id} + * \param[out] ik Pointer to location to return the symbol table's B-tree + * 1/2 rank (<em>Default value of B-tree 1/2 rank: 16</em>) + * \param[out] lk Pointer to location to return the symbol table's leaf + * node 1/2 size (<em>Default value of leaf node 1/2 + * size: 4</em>) + * + * \return \herr_t + * + * \details H5Pget_sym_k() retrieves the size of the symbol table B-tree + * 1/2 rank and the symbol table leaf node 1/2 size. + * + * This function is valid only for file creation property lists. + * + * If a parameter value is set to NULL, that parameter is not + * retrieved. + * + * \see H5Pset_sym_k() + * + * \version 1.6.4 \p ik parameter type changed to \em unsigned + * \version 1.6.0 The \p ik parameter has changed from type int to + * \em unsigned + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pget_sym_k(hid_t plist_id, unsigned *ik /*out*/, unsigned *lk /*out*/); +/** + * \ingroup FCPL + * + * \brief Retrieves the size of a user block + * + * \fcpl_id{plist_id} + * \param[out] size Pointer to location to return user-block size + * + * \return \herr_t + * + * \details H5Pget_userblock() retrieves the size of a user block in a + * file creation property list. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pget_userblock(hid_t plist_id, hsize_t *size); +/** + * \ingroup FCPL + * + * \brief Sets the file space page size for a file creation property list + * + * \fcpl_id{plist_id} + * \param[in] fsp_size File space page size + * + * \return \herr_t + * + * \details H5Pset_file_space_page_size() sets the file space page size + * \p fsp_size used in paged aggregation and paged buffering. + * + * \p fsp_size has a minimum size of 512. Setting a value less + * than 512 will return an error. The library default size for + * the file space page size when not set is 4096. + * + * The size set via this routine may not be changed for the life + * of the file. + * + * \since 1.10.1 + * + */ +H5_DLL herr_t H5Pset_file_space_page_size(hid_t plist_id, hsize_t fsp_size); +/** + * \ingroup FCPL + * + * \brief Sets the file space handling strategy and persisting free-space + * values for a file creation property list + * + * \fcpl_id{plist_id} + * \param[in] strategy The file space handling strategy to be used. See: + * #H5F_fspace_strategy_t + * \param[in] persist A boolean value to indicate whether free space + * should be persistent or not + * \param[in] threshold The smallest free-space section size that the free + * space manager will track + * + * \return \herr_t + * + * \details H5Pset_file_space_strategy() sets the file space handling + * \p strategy, specifies persisting free-space or not (\p persist), + * and sets the free-space section size \p threshold in the file + * creation property list \p plist_id. + * + * #H5F_fspace_strategy_t is a struct defined in H5Fpublic.h as + * follows: + * + * \snippet H5Fpublic.h H5F_fspace_strategy_t_snip + * + * This setting cannot be changed for the life of the file. + * + * As the #H5F_FSPACE_STRATEGY_AGGR and #H5F_FSPACE_STRATEGY_NONE + * strategies do not use the free-space managers, the \p persist + * and \p threshold settings will be ignored for those strategies. + * + * \since 1.10.1 + * + */ H5_DLL herr_t H5Pset_file_space_strategy(hid_t plist_id, H5F_fspace_strategy_t strategy, hbool_t persist, hsize_t threshold); -H5_DLL herr_t H5Pget_file_space_strategy(hid_t plist_id, H5F_fspace_strategy_t *strategy, hbool_t *persist, - hsize_t *threshold); -H5_DLL herr_t H5Pset_file_space_page_size(hid_t plist_id, hsize_t fsp_size); -H5_DLL herr_t H5Pget_file_space_page_size(hid_t plist_id, hsize_t *fsp_size); +/** + * \ingroup FCPL + * + * \brief Sets the size of the parameter used to control the B-trees for + * indexing chunked datasets + * + * \fcpl_id{plist_id} + * \param[in] ik 1/2 rank of chunked storage B-tree + * + * \return \herr_t + * + * \details H5Pset_istore_k() sets the size of the parameter used to + * control the B-trees for indexing chunked datasets. This + * function is valid only for file creation property lists. + * + * \p ik is one half the rank of a tree that stores chunked + * raw data. On average, such a tree will be 75% full, or have + * an average rank of 1.5 times the value of \p ik. + * + * The HDF5 library uses (\p ik*2) as the maximum # of entries + * before splitting a B-tree node. Since only 2 bytes are used + * in storing # of entries for a B-tree node in an HDF5 file, + * (\p ik*2) cannot exceed 65536. The default value for + * \p ik is 32. + * + * \version 1.6.4 \p ik parameter type changed to \p unsigned. + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_istore_k(hid_t plist_id, unsigned ik); +/** + * \ingroup FCPL + * + * \brief Configures the specified shared object header message index + * + * \fcpl_id{plist_id} + * \param[in] index_num Index being configured + * \param[in] mesg_type_flags Types of messages that should be stored in + * this index + * \param[in] min_mesg_size Minimum message size + * + * \return \herr_t + * + * \details H5Pset_shared_mesg_index() is used to configure the specified + * shared object header message index, setting the types of + * messages that may be stored in the index and the minimum size + * of each message. + * + * \p plist_id specifies the file creation property list. + * + * \p index_num specifies the index to be configured. + * \p index_num is zero-indexed, so in a file with three indexes, + * they will be numbered 0, 1, and 2. + * + * \p mesg_type_flags and \p min_mesg_size specify, respectively, + * the types and minimum size of messages that can be stored in + * this index. + * + * Valid message types are as follows: + * + * <table> + * <tr> + * <td>#H5O_SHMESG_NONE_FLAG</td> + * <td>No shared messages</td> + * </tr> + * <tr> + * <td>#H5O_SHMESG_SDSPACE_FLAG</td> + * <td>Simple dataspace message</td> + * </tr> + * <tr> + * <td>#H5O_SHMESG_DTYPE_FLAG</td> + * <td>Datatype message</td> + * </tr> + * <tr> + * <td>#H5O_SHMESG_FILL_FLAG</td> + * <td>Fill value message</td> + * </tr> + * <tr> + * <td>#H5O_SHMESG_PLINE_FLAG</td> + * <td>Filter pipeline message</td> + * </tr> + * <tr> + * <td>#H5O_SHMESG_ATTR_FLAG</td> + * <td>Attribute message</td> + * </tr> + * <tr> + * <td>#H5O_SHMESG_ALL_FLAG</td> + * <td>All message types; i.e., equivalent to the following: + * (#H5O_SHMESG_SDSPACE_FLAG | #H5O_SHMESG_DTYPE_FLAG | + * #H5O_SHMESG_FILL_FLAG | #H5O_SHMESG_PLINE_FLAG | + * #H5O_SHMESG_ATTR_FLAG)</td> + * </tr> + * </table> + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_shared_mesg_index(hid_t plist_id, unsigned index_num, unsigned mesg_type_flags, + unsigned min_mesg_size); +/** + * \ingroup FCPL + * + * \brief Sets number of shared object header message indexes + * + * \fcpl_id{plist_id} + * \param[in] nindexes Number of shared object header message indexes to be + * available in files created with this property list + * (\p nindexes must be <= #H5O_SHMESG_MAX_NINDEXES (8)) + * + * \return \herr_t + * + * \details H5Pset_shared_mesg_nindexes() sets the number of shared object + * header message indexes in the specified file creation property + * list. + * + * This setting determines the number of shared object header + * message indexes, \p nindexes, that will be available in files + * created with this property list. These indexes can then be + * configured with H5Pset_shared_mesg_index(). + * + * If \p nindexes is set to 0 (zero), shared object header messages + * are disabled in files created with this property list. + * + * There is a limit of #H5O_SHMESG_MAX_NINDEXES (8) that can be set + * with H5Pset_shared_mesg_nindexes(). An error will occur if + * specifying a value of \p nindexes that is greater than this value. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_shared_mesg_nindexes(hid_t plist_id, unsigned nindexes); +/** + * \ingroup FCPL + * + * \brief Sets shared object header message storage phase change thresholds + * + * \fcpl_id{plist_id} + * \param[in] max_list Threshold above which storage of a shared object + * header message index shifts from list to B-tree + * \param[in] min_btree Threshold below which storage of a shared object + * header message index reverts to list format + * + * \return \herr_t + * + * \details H5Pset_shared_mesg_phase_change() sets threshold values for + * storage of shared object header message indexes in a file. + * These phase change thresholds determine the point at which the + * index storage mechanism changes from a more compact list format + * to a more performance-oriented B-tree format, and vice-versa. + * + * By default, a shared object header message index is initially + * stored as a compact list. When the number of messages in an + * index exceeds the threshold value of \p max_list, storage + * switches to a B-tree for improved performance. If the number + * of messages subsequently falls below the \p min_btree threshold, + * the index will revert to the list format. + * + * If \p max_list is set to 0 (zero), shared object header message + * indexes in the file will be created as B-trees and will never + * revert to lists. + * + * \p plist_id specifies the file creation property list. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_shared_mesg_phase_change(hid_t plist_id, unsigned max_list, unsigned min_btree); +/** + * \ingroup FCPL + * + * \brief Sets the byte size of the offsets and lengths used to address + * objects in an HDF5 file + * + * \fcpl_id{plist_id} + * \param[in] sizeof_addr Size of an object offset in bytes + * \param[in] sizeof_size Size of an object length in bytes + * + * \return \herr_t + * + * \details H5Pset_sizes() sets the byte size of the offsets and lengths + * used to address objects in an HDF5 file. This function is only + * valid for file creation property lists. Passing in a value + * of 0 for one of the parameters retains the current value. The + * default value for both values is the same as sizeof(hsize_t) + * in the library (normally 8 bytes). Valid values currently + * are 2, 4, 8 and 16. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_sizes(hid_t plist_id, size_t sizeof_addr, size_t sizeof_size); +/** + * \ingroup FCPL + * + * \brief + * + * \fcpl_id{plist_id} + * \param[in] ik Symbol table tree rank + * \param[in] lk Symbol table node size + * + * \return \herr_t + * + * \details H5Pset_sym_k() sets the size of parameters used to control the + * symbol table nodes. + * + * This function is valid only for file creation property lists. + * Passing in a value of zero (0) for one of the parameters retains + * the current value. + * + * \p ik is one half the rank of a B-tree that stores a symbol + * table for a group. Internal nodes of the symbol table are on + * average 75% full. That is, the average rank of the tree is + * 1.5 times the value of \p ik. The HDF5 library uses (\p ik*2) as + * the maximum # of entries before splitting a B-tree node. Since + * only 2 bytes are used in storing # of entries for a B-tree node + * in an HDF5 file, (\p ik*2) cannot exceed 65536. The default value + * for \p ik is 16. + * + * \p lk is one half of the number of symbols that can be stored in + * a symbol table node. A symbol table node is the leaf of a symbol + * table tree which is used to store a group. When symbols are + * inserted randomly into a group, the group's symbol table nodes are + * 75% full on average. That is, they contain 1.5 times the number of + * symbols specified by \p lk. The default value for \p lk is 4. + * + * \version 1.6.4 \p ik parameter type changed to \em unsigned. + * \version 1.6.0 The \p ik parameter has changed from type int to + * \em unsigned. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_sym_k(hid_t plist_id, unsigned ik, unsigned lk); +/** + * \ingroup FCPL + * + * \brief Sets user block size + * + * \fcpl_id{plist_id} + * \param[in] size Size of the user-block in bytes + * + * \return \herr_t + * + * \details H5Pset_userblock() sets the user block size of a file creation + * property list. The default user block size is 0; it may be set + * to any power of 2 equal to 512 or greater (512, 1024, 2048, etc.). + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_userblock(hid_t plist_id, hsize_t size); /* File access property list (FAPL) routines */ -H5_DLL herr_t H5Pset_alignment(hid_t fapl_id, hsize_t threshold, hsize_t alignment); -H5_DLL herr_t H5Pget_alignment(hid_t fapl_id, hsize_t *threshold /*out*/, hsize_t *alignment /*out*/); -H5_DLL herr_t H5Pset_driver(hid_t plist_id, hid_t driver_id, const void *driver_info); -H5_DLL hid_t H5Pget_driver(hid_t plist_id); +/** + * \ingroup FAPL + * + * \brief Retrieves the current settings for alignment properties from a + * file access property list + * + * \fapl_id + * \param[out] threshold Pointer to location of return threshold value + * \param[out] alignment Pointer to location of return alignment value + * + * \return \herr_t + * + * \details H5Pget_alignment() retrieves the current settings for + * alignment properties from a file access property list. The + * \p threshold and/or \p alignment pointers may be null + * pointers (NULL). + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pget_alignment(hid_t fapl_id, hsize_t *threshold /*out*/, hsize_t *alignment /*out*/); +/** + * \ingroup FAPL + * + * \brief Queries the raw data chunk cache parameters + * + * \fapl_id{plist_id} + * \param[in,out] mdc_nelmts <i>No longer used</i> + * \param[in,out] rdcc_nslots Number of elements (objects) in the raw data + * chunk cache + * \param[in,out] rdcc_nbytes Total size of the raw data chunk cache, in + * bytes + * \param[in,out] rdcc_w0 Preemption policy + * + * \return \herr_t + * + * \details H5Pget_cache() retrieves the maximum possible number of + * elements in the raw data chunk cache, the maximum possible + * number of bytes in the raw data chunk cache, and the + * preemption policy value. + * + * Any (or all) arguments may be null pointers, in which case + * the corresponding datum is not returned. + * + * Note that the \p mdc_nelmts parameter is no longer used. + * + * \version 1.8.0 Use of the \p mdc_nelmts parameter discontinued. + * Metadata cache configuration is managed with + * H5Pset_mdc_config() and H5Pget_mdc_config() + * \version 1.6.0 The \p rdcc_nbytes and \p rdcc_nslots parameters changed + * from type int to size_t. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pget_cache(hid_t plist_id, int *mdc_nelmts, /* out */ + size_t *rdcc_nslots /*out*/, size_t *rdcc_nbytes /*out*/, double *rdcc_w0); +/** + * \ingroup FAPL + * + * \brief Gets information about the write tracking feature used by + * the core VFD + * + * \fapl_id + * \param[out] is_enabled Whether the feature is enabled + * \param[out] page_size Size, in bytes, of write aggregation pages + * + * \return \herr_t + * + * \details H5Pget_core_write_tracking() retrieves information about the + * write tracking feature used by the core VFD. + * + * When a file is created or opened for writing using the core + * virtual file driver (VFD) with the backing store option turned + * on, the VFD can be configured to track changes to the file + * and only write out the modified bytes. To avoid a large number + * of small writes, the changes can be aggregated into pages of + * a user-specified size. The core VFD is also known as the + * memory VFD. The driver identifier is #H5FD_CORE. + * + * \note This function is only for use with the core VFD and must be used + * after the call to H5Pset_fapl_core(). It is an error to use this + * function with any other VFD. + * + * \note This function only applies to the backing store write operation + * which typically occurs when the file is flushed or closed. This + * function has no relationship to the increment parameter passed + * to H5Pset_fapl_core(). + * + * \note For optimum performance, the \p page_size parameter should be + * a power of two. + * + * \since 1.8.13 + * + */ +H5_DLL herr_t H5Pget_core_write_tracking(hid_t fapl_id, hbool_t *is_enabled, size_t *page_size); +/** + * \ingroup FAPL + * + * \brief Returns low-lever driver identifier + * + * \plist_id + * + * \return \hid_t{low level driver} + * + * \details H5Pget_driver() returns the identifier of the low-level file + * driver associated with the file access property list or + * data transfer property list \p plist_id. + * + * Valid driver identifiers distributed with HDF5 are listed and + * described in the following table. + * + * <table> + * <tr> + * <th>Driver Name</th> + * <th>Driver Identifier</th> + * <th>Description</th> + * <th>Related Function</th> + * </tr> + * <tr> + * <td>POSIX</td> + * <td>#H5FD_SEC2</td> + * <td>This driver uses POSIX file-system functions like read and + * write to perform I/O to a single, permanent file on local disk + * with no system buffering. This driver is POSIX-compliant and + * is the default file driver for all systems.</td> + * <td>H5Pset_fapl_sec2()</td> + * </tr> + * <tr> + * <td>Direct</td> + * <td>#H5FD_DIRECT</td> + * <td>This is the #H5FD_SEC2 driver except data is written to or + * read from the file synchronously without being cached by the + * system.</td> + * <td>H5Pset_fapl_direct()</td> + * </tr> + * <tr> + * <td>Log</td> + * <td>#H5FD_LOG</td> + * <td>This is the #H5FD_SEC2 driver with logging capabilities.</td> + * <td>H5Pset_fapl_log()</td> + * </tr> + * <tr> + * <td>Windows</td> + * <td>#H5FD_WINDOWS</td> + * <td>This driver was modified in HDF5-1.8.8 to be a wrapper of the + * POSIX driver, #H5FD_SEC2. This change should not affect user + * applications.</td> + * <td>H5Pset_fapl_windows()</td> + * </tr> + * <tr> + * <td>STDIO</td> + * <td>#H5FD_STDIO</td> + * <td>This driver uses functions from the standard C stdio.h to + * perform I/O to a single, permanent file on local disk with + * additional system buffering.</td> + * <td>H5Pset_fapl_stdio()</td> + * </tr> + * <tr> + * <td>Memory</td> + * <td>#H5FD_CORE</td> + * <td>With this driver, an application can work with a file in + * memory for faster reads and writes. File contents are kept in + * memory until the file is closed. At closing, the memory + * version of the file can be written back to disk or abandoned. + * </td> + * <td>H5Pset_fapl_core()</td> + * </tr> + * <tr> + * <td>Family</td> + * <td>#H5FD_FAMILY</td> + * <td>With this driver, the HDF5 file’s address space is partitioned + * into pieces and sent to separate storage files using an + * underlying driver of the user’s choice. This driver is for + * systems that do not support files larger than 2 gigabytes. + * </td> + * <td>H5Pset_fapl_family()</td> + * </tr> + * <tr> + * <td>Multi</td> + * <td>#H5FD_MULTI</td> + * <td>With this driver, data can be stored in multiple files + * according to the type of the data. I/O might work better if + * data is stored in separate files based on the type of data. + * The Split driver is a special case of this driver.</td> + * <td>H5Pset_fapl_multi()</td> + * </tr> + * <tr> + * <td>Parallel</td> + * <td>#H5FD_MPIO</td> + * <td>This is the standard HDF5 file driver for parallel file + * systems. This driver uses the MPI standard for both + * communication and file I/O.</td> + * <td>H5Pset_fapl_mpio()</td> + * </tr> + * <tr> + * <td>Parallel POSIX</td> + * <td>H5FD_MPIPOSIX</td> + * <td>This driver is no longer available.</td> + * <td></td> + * </tr> + * <tr> + * <td>Stream</td> + * <td>H5FD_STREAM</td> + * <td>This driver is no longer available.</td> + * <td></td> + * </tr> + * </table> + * + * This list does not include custom drivers that might be + * defined and registered by a user. + * + * The returned driver identifier is only valid as long as the + * file driver remains registered. + * + * + * \since 1.4.0 + * + */ +H5_DLL hid_t H5Pget_driver(hid_t plist_id); +/** + * \ingroup FAPL + * + * \brief Returns a pointer to file driver information + * + * \param[in] plist_id File access or data transfer property list + * identifier + * + * \return Returns a pointer to a struct containing low-level driver + * information. Otherwise returns NULL. NULL is also returned if + * no driver-specific properties have been registered. No error + * is pushed on the stack in this case. + * + * \details H5Pget_driver_info() returns a pointer to file driver-specific + * information for the low-level driver associated with the file + * access or data transfer property list \p plist_id. + * + * The pointer returned by this function points to an “uncopied” + * struct. Driver-specific versions of that struct are defined + * for each low-level driver in the relevant source code file + * H5FD*.c. For example, the struct used for the MULTI driver is + * \c H5FD_multi_fapl_t defined in H5FDmulti.c. + * + * If no driver-specific properties have been registered, + * H5Pget_driver_info() returns NULL. + * + * \note H5Pget_driver_info() and H5Pset_driver() are used only when + * creating a virtual file driver (VFD) in the virtual file + * layer (VFL). + * + * \version 1.10.1 Return value was changed from \em void * to + * \em const \em void *. + * \version 1.8.2 Function publicized in this release; previous releases + * described this function only in the virtual file driver + * documentation. + * + */ H5_DLL const void *H5Pget_driver_info(hid_t plist_id); -H5_DLL herr_t H5Pset_family_offset(hid_t fapl_id, hsize_t offset); -H5_DLL herr_t H5Pget_family_offset(hid_t fapl_id, hsize_t *offset); -H5_DLL herr_t H5Pset_multi_type(hid_t fapl_id, H5FD_mem_t type); -H5_DLL herr_t H5Pget_multi_type(hid_t fapl_id, H5FD_mem_t *type); -H5_DLL herr_t H5Pset_cache(hid_t plist_id, int mdc_nelmts, size_t rdcc_nslots, size_t rdcc_nbytes, - double rdcc_w0); -H5_DLL herr_t H5Pget_cache(hid_t plist_id, int *mdc_nelmts, /* out */ - size_t *rdcc_nslots /*out*/, size_t *rdcc_nbytes /*out*/, double *rdcc_w0); -H5_DLL herr_t H5Pset_mdc_config(hid_t plist_id, H5AC_cache_config_t *config_ptr); -H5_DLL herr_t H5Pget_mdc_config(hid_t plist_id, H5AC_cache_config_t *config_ptr); /* out */ -H5_DLL herr_t H5Pset_gc_references(hid_t fapl_id, unsigned gc_ref); -H5_DLL herr_t H5Pget_gc_references(hid_t fapl_id, unsigned *gc_ref /*out*/); -H5_DLL herr_t H5Pset_fclose_degree(hid_t fapl_id, H5F_close_degree_t degree); -H5_DLL herr_t H5Pget_fclose_degree(hid_t fapl_id, H5F_close_degree_t *degree); -H5_DLL herr_t H5Pset_meta_block_size(hid_t fapl_id, hsize_t size); -H5_DLL herr_t H5Pget_meta_block_size(hid_t fapl_id, hsize_t *size /*out*/); -H5_DLL herr_t H5Pset_sieve_buf_size(hid_t fapl_id, size_t size); -H5_DLL herr_t H5Pget_sieve_buf_size(hid_t fapl_id, size_t *size /*out*/); -H5_DLL herr_t H5Pset_small_data_block_size(hid_t fapl_id, hsize_t size); -H5_DLL herr_t H5Pget_small_data_block_size(hid_t fapl_id, hsize_t *size /*out*/); -H5_DLL herr_t H5Pset_libver_bounds(hid_t plist_id, H5F_libver_t low, H5F_libver_t high); -H5_DLL herr_t H5Pget_libver_bounds(hid_t plist_id, H5F_libver_t *low, H5F_libver_t *high); -H5_DLL herr_t H5Pset_elink_file_cache_size(hid_t plist_id, unsigned efc_size); -H5_DLL herr_t H5Pget_elink_file_cache_size(hid_t plist_id, unsigned *efc_size); -H5_DLL herr_t H5Pset_file_image(hid_t fapl_id, void *buf_ptr, size_t buf_len); -H5_DLL herr_t H5Pget_file_image(hid_t fapl_id, void **buf_ptr_ptr, size_t *buf_len_ptr); -H5_DLL herr_t H5Pset_file_image_callbacks(hid_t fapl_id, H5FD_file_image_callbacks_t *callbacks_ptr); -H5_DLL herr_t H5Pget_file_image_callbacks(hid_t fapl_id, H5FD_file_image_callbacks_t *callbacks_ptr); -H5_DLL herr_t H5Pset_core_write_tracking(hid_t fapl_id, hbool_t is_enabled, size_t page_size); -H5_DLL herr_t H5Pget_core_write_tracking(hid_t fapl_id, hbool_t *is_enabled, size_t *page_size); -H5_DLL herr_t H5Pset_metadata_read_attempts(hid_t plist_id, unsigned attempts); -H5_DLL herr_t H5Pget_metadata_read_attempts(hid_t plist_id, unsigned *attempts); -H5_DLL herr_t H5Pset_object_flush_cb(hid_t plist_id, H5F_flush_cb_t func, void *udata); -H5_DLL herr_t H5Pget_object_flush_cb(hid_t plist_id, H5F_flush_cb_t *func, void **udata); -H5_DLL herr_t H5Pset_mdc_log_options(hid_t plist_id, hbool_t is_enabled, const char *location, - hbool_t start_on_access); -H5_DLL herr_t H5Pget_mdc_log_options(hid_t plist_id, hbool_t *is_enabled, char *location, - size_t *location_size, hbool_t *start_on_access); -H5_DLL herr_t H5Pset_evict_on_close(hid_t fapl_id, hbool_t evict_on_close); -H5_DLL herr_t H5Pget_evict_on_close(hid_t fapl_id, hbool_t *evict_on_close); -H5_DLL herr_t H5Pset_file_locking(hid_t fapl_id, hbool_t use_file_locking, hbool_t ignore_when_disabled); +/** + * \ingroup FAPL + * + * \brief Retrieves the size of the external link open file cache + * + * \fapl_id{plist_id} + * \param[out] efc_size External link open file cache size in number of files + * + * \return \herr_t + * + * \details H5Pget_elink_file_cache_size() retrieves the number of files that + * can be held open in an external link open file cache. + * + * \since 1.8.7 + * + */ +H5_DLL herr_t H5Pget_elink_file_cache_size(hid_t plist_id, unsigned *efc_size); +/** + * \ingroup FAPL + * + * \brief Retrieves the file access property list setting that determines + * whether an HDF5 object will be evicted from the library's metadata + * cache when it is closed + * + * \fapl_id + * \param[out] evict_on_close Pointer to a variable that will indicate if + * the object will be evicted on close + * + * \return \herr_t + * + * \details The library's metadata cache is fairly conservative about holding on + * to HDF5 object metadata (object headers, chunk index structures, + * etc.), which can cause the cache size to grow, resulting in memory + * pressure on an application or system. When enabled, the "evict on + * close" property will cause all metadata for an object to be + * immediately evicted from the cache as long as it is not referenced + * by any other open object. + * + * See H5Pset_evict_on_close() for additional notes on behavior. + * + * \since 1.10.1 + * + */ +H5_DLL herr_t H5Pget_evict_on_close(hid_t fapl_id, hbool_t *evict_on_close); +/** + * \ingroup FAPL + * + * \brief Retrieves a data offset from the file access property list + * + * \fapl_id + * \param[out] offset Offset in bytes within the HDF5 file + * + * \return \herr_t + * + * \details H5Pget_family_offset() retrieves the value of offset from the + * file access property list \p fapl_id so that the user + * application can retrieve a file handle for low-level access to + * a particular member of a family of files. The file handle is + * retrieved with a separate call to H5Fget_vfd_handle() (or, + * in special circumstances, to H5FDget_vfd_handle(), see \ref VFL). + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pget_family_offset(hid_t fapl_id, hsize_t *offset); +/** + * \ingroup FAPL + * + * \brief Returns the file close degree + * + * \fapl_id + * \param[out] degree Pointer to a location to which to return the file + * close degree property, the value of \p degree + * + * \return \herr_t + * + * \details H5Pget_fclose_degree() returns the current setting of the file + * close degree property \p degree in the file access property + * list \p fapl_id. The value of \p degree determines how + * aggressively H5Fclose() deals with objects within a file that + * remain open when H5Fclose() is called to close that file. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pget_fclose_degree(hid_t fapl_id, H5F_close_degree_t *degree); +/** + * \ingroup FAPL + * + * \brief Retrieves a copy of the file image designated as the initial content + * and structure of a file + * + * \fapl_id + * \param[in,out] buf_ptr_ptr On input, \c NULL or a pointer to a + * pointer to a buffer that contains the + * file image.\n On successful return, if \p buf_ptr_ptr is not + * \c NULL, \Code{*buf_ptr_ptr} will contain a pointer to a copy + * of the initial image provided in the last call to + * H5Pset_file_image() for the supplied \p fapl_id. If no initial + * image has been set, \Code{*buf_ptr_ptr} will be \c NULL. + * \param[in,out] buf_len_ptr On input, \c NULL or a pointer to a buffer + * specifying the required size of the buffer to hold the file + * image.\n On successful return, if \p buf_len_ptr was not + * passed in as \c NULL, \p buf_len_ptr will return the required + * size in bytes of the buffer to hold the initial file image in + * the supplied file access property list, \p fapl_id. If no + * initial image is set, the value of \Code{*buf_len_ptr} will be + * set to 0 (zero) + * \return \herr_t + * + * \details H5Pget_file_image() allows an application to retrieve a copy of the + * file image designated for a VFD to use as the initial contents of a file. + * + * If file image callbacks are defined, H5Pget_file_image() will use + * them when allocating and loading the buffer to return to the + * application (see H5Pset_file_image_callbacks()). If file image + * callbacks are not defined, the function will use \c malloc and \c + * memcpy. When \c malloc and \c memcpy are used, it is the caller’s + * responsibility to discard the returned buffer with a call to \c + * free. + * + * It is the responsibility of the calling application to free the + * buffer whose address is returned in \p buf_ptr_ptr. This can be + * accomplished with \c free if file image callbacks have not been set + * (see H5Pset_file_image_callbacks()) or with the appropriate method + * if file image callbacks have been set. + * + * \see H5LTopen_file_image(), H5Fget_file_image(), H5Pset_file_image(), + * H5Pset_file_image_callbacks(), H5Pget_file_image_callbacks(), + * \ref H5FD_file_image_callbacks_t, \ref H5FD_file_image_op_t, + * <a href="https://portal.hdfgroup.org/display/HDF5/HDF5+File+Image+Operations"> + * HDF5 File Image Operations</a>. + * + * + * \since 1.8.9 + * + */ +H5_DLL herr_t H5Pget_file_image(hid_t fapl_id, void **buf_ptr_ptr, size_t *buf_len_ptr); +/** + * \ingroup FAPL + * + * \brief Retrieves callback routines for working with file images + * + * \fapl_id + * \param[in,out] callbacks_ptr Pointer to the instance of the + * #H5FD_file_image_callbacks_t struct in which the callback + * routines are to be returned\n + * Struct fields must be initialized to NULL before the call + * is made.\n + * Struct field contents upon return will match those passed in + * in the last H5Pset_file_image_callbacks() call for the file + * access property list \p fapl_id. + * \return \herr_t + * + * \details H5Pget_file_image_callbacks() retrieves the callback routines set for + * working with file images opened with the file access property list + * \p fapl_id. + * + * The callbacks must have been previously set with + * H5Pset_file_image_callbacks() in the file access property list. + * + * Upon the successful return of H5Pset_file_image_callbacks(), the + * fields in the instance of the #H5FD_file_image_callbacks_t struct + * pointed to by \p callbacks_ptr will contain the same values as were + * passed in the most recent H5Pset_file_image_callbacks() call for the + * file access property list \p fapl_id. + * + * \see H5LTopen_file_image(), H5Fget_file_image(), H5Pset_file_image(), + * H5Pset_file_image_callbacks(), H5Pget_file_image_callbacks(), + * \ref H5FD_file_image_callbacks_t, \ref H5FD_file_image_op_t, + * <a href="https://portal.hdfgroup.org/display/HDF5/HDF5+File+Image+Operations"> + * HDF5 File Image Operations</a>. + * + * \since 1.8.9 + * + */ +H5_DLL herr_t H5Pget_file_image_callbacks(hid_t fapl_id, H5FD_file_image_callbacks_t *callbacks_ptr); +/** + * \ingroup FAPL + * + * \brief Retrieves the file locking property values + * + * \fapl_id + * \param[out] use_file_locking File locking flag + * \param[out] ignore_when_disabled Ignore when disabled flag + * \return \herr_t + * + * \details H5Pget_file_locking() retrieves the file locking property values for + * the file access property list specified by \p fapl_id. + * + * \since 1.10.7 + * + */ H5_DLL herr_t H5Pget_file_locking(hid_t fapl_id, hbool_t *use_file_locking, hbool_t *ignore_when_disabled); +/** + * \ingroup FAPL + * + * \brief Returns garbage collecting references setting + * + * \fapl_id + * \param[out] gc_ref Flag returning the state of reference garbage + * collection. A returned value of 1 indicates that + * garbage collection is on while 0 indicates that + * garbage collection is off. + * + * \return \herr_t + * + * \details H5Pget_gc_references() returns the current setting for the + * garbage collection references property from the specified + * file access property list. The garbage collection references + * property is set by H5Pset_gc_references(). + * + * \since 1.2.0 + * + */ +H5_DLL herr_t H5Pget_gc_references(hid_t fapl_id, unsigned *gc_ref /*out*/); +/** + * \ingroup FAPL + * + * \brief Retrieves library version bounds settings that indirectly control + * the format versions used when creating objects + * + * \fapl_id{plist_id} + * \param[out] low The earliest version of the library that will be used + * for writing objects + * \param[out] high The latest version of the library that will be used for + * writing objects + * + * \return \herr_t + * + * \details H5Pget_libver_bounds() retrieves the lower and upper bounds on + * the HDF5 library release versions that indirectly determine the + * object format versions used when creating objects in the file. + * + * This property is retrieved from the file access property list + * specified by the parameter \p fapl_id. + * + * The value returned in the parameters \p low and \p high is one + * of the enumerated values in the #H5F_libver_t struct, which is + * defined in H5Fpublic.h. + * + * \version 1.10.2 Add #H5F_LIBVER_V18 to the enumerated defines in + * #H5F_libver_t + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_libver_bounds(hid_t plist_id, H5F_libver_t *low, H5F_libver_t *high); +/** + * \ingroup FAPL + * + * \brief Get the current initial metadata cache configuration from the + * provided file access property list + * + * \fapl_id{plist_id} + * \param[in,out] config_ptr Pointer to the instance of #H5AC_cache_config_t + * in which the current metadata cache configuration is to be + * reported + * \return \herr_t + * + * \note The \c in direction applies only to the \ref H5AC_cache_config_t.version + * field. All other fields are \c out parameters. + * + * \details The fields of the #H5AC_cache_config_t structure are shown + * below: + * \snippet H5ACpublic.h H5AC_cache_config_t_snip + * \click4more + * + * H5Pget_mdc_config() gets the initial metadata cache configuration + * contained in a file access property list and loads it into the + * instance of #H5AC_cache_config_t pointed to by the \p config_ptr + * parameter. This configuration is used when the file is opened. + * + * Note that the version field of \Code{*config_ptr} must be + * initialized; this allows the library to support earlier versions of + * the #H5AC_cache_config_t structure. + * + * See the overview of the metadata cache in the special topics section + * of the user guide for details on the configuration data returned. If + * you haven't read and understood that documentation, the results of + * this call will not make much sense. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_mdc_config(hid_t plist_id, H5AC_cache_config_t *config_ptr); +/** + * \ingroup FAPL + * + * \brief Retrieves the metadata cache image configuration values for a file + * access property list + * + * \fapl_id{plist_id} + * \param[out] config_ptr Pointer to metadata cache image configuration values + * \return \herr_t + * + * \details H5Pget_mdc_image_config() retrieves the metadata cache image values + * into \p config_ptr for the file access property list specified in \p + * plist_id. + * + * #H5AC_cache_image_config_t is defined as follows: + * \snippet H5ACpublic.h H5AC_cache_image_config_t_snip + * \click4more + * + * \since 1.10.1 + */ +H5_DLL herr_t H5Pget_mdc_image_config(hid_t plist_id, H5AC_cache_image_config_t *config_ptr /*out*/); +/** + * \ingroup FAPL + * + * \brief Gets metadata cache logging options + * + * \fapl_id{plist_id} + * \param[out] is_enabled Flag whether logging is enabled + * \param[out] location Location of log in UTF-8/ASCII (file path/name) (On + * Windows, this must be ASCII) + * \param[out] location_size Size in bytes of the location string + * \param[out] start_on_access Whether the logging begins as soon as the file is + * opened or created + * \return \herr_t + * + * \details The metadata cache is a central part of the HDF5 library through + * which all file metadata reads and writes take place. File metadata + * is normally invisible to the user and is used by the library for + * purposes such as locating and indexing data. File metadata should + * not be confused with user metadata, which consists of attributes + * created by users and attached to HDF5 objects such as datasets via + * \ref H5A API calls. + * + * Due to the complexity of the cache, a trace/logging feature has been + * created that can be used by HDF5 developers for debugging and + * performance analysis. The functions that control this functionality + * will normally be of use to a very limited number of developers + * outside of The HDF Group. The functions have been documented to help + * users create logs that can be sent with bug reports. + * + * Control of the log functionality is straightforward. Logging is + * enabled via the H5Pset_mdc_log_options() function, which will modify + * the file access property list used to open or create a file. This + * function has a flag that determines whether logging begins at file + * open or starts in a paused state. Log messages can then be + * controlled via the H5Fstart_mdc_logging() / H5Fstop_mdc_logging() + * functions. H5Pget_mdc_log_options() can be used to examine a file + * access property list, and H5Fget_mdc_logging_status() will return + * the current state of the logging flags. + * + * The log format is described in the + * <a href="https://bit.ly/2PG6fNv">Metadata Cache Logging</a> document. + * + * \since 1.10.0 + */ +H5_DLL herr_t H5Pget_mdc_log_options(hid_t plist_id, hbool_t *is_enabled, char *location, + size_t *location_size, hbool_t *start_on_access); +/** + * \ingroup FAPL + * + * \brief Returns the current metadata block size setting + * + * \fapl_id{fapl_id} + * \param[out] size Minimum size, in bytes, of metadata block allocations + * + * \return \herr_t + * + * \details Returns the current minimum size, in bytes, of new + * metadata block allocations. This setting is retrieved from the + * file access property list \p fapl_id. + * + * This value is set by H5Pset_meta_block_size() and is + * retrieved from the file access property list \p fapl_id. + * + * \since 1.4.0 + */ +H5_DLL herr_t H5Pget_meta_block_size(hid_t fapl_id, hsize_t *size); +/** + * \ingroup FAPL + * + * \brief Retrieves the number of read attempts from a file access + * property list + * + * \fapl_id{plist_id} + * \param[out] attempts The number of read attempts + * + * \return \herr_t + * + * \details H5Pget_metadata_read_attempts() retrieves the number of read + * attempts that is set in the file access property list \p plist_id. + * + * For a default file access property list, the value retrieved + * will depend on whether the user sets the number of attempts via + * H5Pset_metadata_read_attempts(): + * + * <ul> + * + * <li>If the number of attempts is set to N, the value + * returned will be N. + * <li>If the number of attempts is not set, the value returned + * will be the default for non-SWMR access (1). SWMR is short + * for single-writer/multiple-reader. + * </ul> + * + * For the file access property list of a specified HDF5 file, + * the value retrieved will depend on how the file is opened + * and whether the user sets the number of read attempts via + * H5Pset_metadata_read_attempts(): + * + * <ul> + * <li>For a file opened with SWMR access: + * + * <ul> + * <li> If the number of attempts is set to N, the value + * returned will be N. + * <li> If the number of attempts is not set, the value + * returned will be the default for SWMR access (100). + * </ul> + * <li>For a file opened without SWMR access, the value + * retrieved will always be the default for non-SWMR access + * (1). The value set via H5Pset_metadata_read_attempts() does + * not have any effect on non-SWMR access. + * </ul> + * + * \par Failure Modes + * \parblock + * + * When the input property list is not a file access property list. + * + * When the library is unable to retrieve the number of read attempts from + * the file access property list. + * + * \endparblock + * + * \par Examples + * \parblock + * + * The first example illustrates the two cases for retrieving the number + * of read attempts from a default file access property list. + * + * \include H5Pget_metadata_read_attempts.1.c + * + * The second example illustrates the two cases for retrieving the + * number of read attempts from the file access property list of a file + * opened with SWMR acccess. + * + * \include H5Pget_metadata_read_attempts.2.c + * + * The third example illustrates the two cases for retrieving the number + * of read attempts from the file access property list of a file opened + * with non-SWMR acccess. + * + * \include H5Pget_metadata_read_attempts.3.c + * + * \endparblock + * + * \since 1.10.0 + */ +H5_DLL herr_t H5Pget_metadata_read_attempts(hid_t plist_id, unsigned *attempts); +/** + * \ingroup FAPL + * + * \brief Retrieves type of data property for MULTI driver + * + * \param[in] fapl_id File access property list or data transfer property + * list identifier + * \param[out] type Type of data + * + * \return \herr_t + * + * \details H5Pget_multi_type() retrieves the type of data setting from + * the file access or data transfer property list \p fapl_id. + * This enables a user application to specify the type of data + * the application wishes to access so that the application can + * retrieve a file handle for low-level access to the particular + * member of a set of MULTI files in which that type of data is + * stored. The file handle is retrieved with a separate call to + * H5Fget_vfd_handle() (or, in special circumstances, to + * H5FDget_vfd_handle(); see the Virtual File Layer documentation + * for more information. + * + * The type of data returned in \p type will be one of those + * listed in the discussion of the \p type parameter in the the + * description of the function H5Pset_multi_type(). + * + * Use of this function is only appropriate for an HDF5 file + * written as a set of files with the MULTI file driver. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pget_multi_type(hid_t fapl_id, H5FD_mem_t *type); +/** + * \ingroup FAPL + * + * \brief Retrieves the object flush property values from the file access property list + * + * \fapl_id{plist_id} + * \param[in] func The user-defined callback function + * \param[in] udata The user-defined input data for the callback function + * + * \return \herr_t + * + * \details H5Pget_object_flush_cb() gets the user-defined callback + * function that is set in the file access property list + * \p fapl_id and stored in the parameter \p func. The callback is + * invoked whenever an object flush occurs in the file. This + * routine also obtains the user-defined input data that is + * passed along to the callback function in the parameter + * \p udata. + * + * \par Example + * \parblock + * The example below illustrates the usage of this routine to obtain the + * object flush property values. + * + * \include H5Pget_object_flush_cb.c + * \endparblock + * + * \since 1.10.0 + */ +H5_DLL herr_t H5Pget_object_flush_cb(hid_t plist_id, H5F_flush_cb_t *func, void **udata); +/** + * \ingroup FAPL + * + * \brief Retrieves the maximum size for the page buffer and the minimum + percentage for metadata and raw data pages + * + * \fapl_id{plist_id} + * \param[out] buf_size Maximum size, in bytes, of the page buffer + * \param[out] min_meta_perc Minimum metadata percentage to keep in the + * page buffer before allowing pages containing metadata to + * be evicted + * + * \param[out] min_raw_perc Minimum raw data percentage to keep in the + * page buffer before allowing pages containing raw data to + * be evicted + * + * \return \herr_t + * + * \details H5Pget_page_buffer_size() retrieves \p buf_size, the maximum + * size in bytes of the page buffer, \p min_meta_perc, the + * minimum metadata percentage, and \p min_raw_perc, the + * minimum raw data percentage. + * + * \since 1.10.1 + */ +H5_DLL herr_t H5Pget_page_buffer_size(hid_t plist_id, size_t *buf_size, unsigned *min_meta_perc, + unsigned *min_raw_perc); +/** + * \ingroup FAPL + * + * \brief Returns maximum data sieve buffer size + * + * \fapl_id{fapl_id} + * \param[in] size Maximum size, in bytes, of data sieve buffer + * + * \return \herr_t + * + * \details H5Pget_sieve_buf_size() retrieves, size, the current maximum + * size of the data sieve buffer. + * + * This value is set by H5Pset_sieve_buf_size() and is retrieved + * from the file access property list fapl_id. + * + * \version 1.6.0 The \p size parameter has changed from type \c hsize_t + * to \c size_t + * \since 1.4.0 + */ +H5_DLL herr_t H5Pget_sieve_buf_size(hid_t fapl_id, size_t *size /*out*/); +/** + * \ingroup FAPL + * + * \brief Retrieves the current small data block size setting + * + * \fapl_id{fapl_id} + * \param[out] size Maximum size, in bytes, of the small data block + * + * \result \herr_t + * + * \details H5Pget_small_data_block_size() retrieves the current setting + * for the size of the small data block. + * + * If the returned value is zero (0), the small data block + * mechanism has been disabled for the file. + * + * \since 1.4.4 + */ +H5_DLL herr_t H5Pget_small_data_block_size(hid_t fapl_id, hsize_t *size /*out*/); +/** + * \ingroup FAPL + * + * \brief Sets alignment properties of a file access property list + * + * \fapl_id + * \param[in] threshold Threshold value. Note that setting the threshold + * value to 0 (zero) has the effect of a special case, + * forcing everything to be aligned + * \param[in] alignment Alignment value + * + * \return \herr_t + * + * \details H5Pset_alignment() sets the alignment properties of a + * file access property list so that any file object greater + * than or equal in size to \p threshold bytes will be aligned + * on an address which is a multiple of \p alignment. The + * addresses are relative to the end of the user block; the + * alignment is calculated by subtracting the user block size + * from the absolute file address and then adjusting the address + * to be a multiple of \p alignment. + * + * Default values for \p threshold and \p alignment are one, + * implying no alignment. Generally the default values will + * result in the best performance for single-process access to + * the file. For MPI IO and other parallel systems, choose an + * alignment which is a multiple of the disk block size. + * + * If the file space handling strategy is set to + * #H5F_FSPACE_STRATEGY_PAGE, then the alignment set via this + * routine is ignored. The file space handling strategy is set + * by H5Pset_file_space_strategy(). + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_alignment(hid_t fapl_id, hsize_t threshold, hsize_t alignment); +/** + * \ingroup FAPL + * + * \brief Sets the raw data chunk cache parameters + * + * \fapl_id{plist_id} + * \param[in] mdc_nelmts No longer used; any value passed is ignored + * \param[in] rdcc_nslots The number of chunk slots in the raw data chunk + * cache for this dataset. Increasing this value + * reduces the number of cache collisions, but + * slightly increases the memory used. Due to the + * hashing strategy, this value should ideally be a + * prime number. As a rule of thumb, this value + * should be at least 10 times the number of chunks + * that can fit in \p rdcc_nbytes bytes. For + * maximum performance, this value should be set + * approximately 100 times that number of chunks. + * The default value is 521. + * \param[in] rdcc_nbytes Total size of the raw data chunk cache in bytes. + * The default size is 1 MB per dataset. + * \param[in] rdcc_w0 The chunk preemption policy for all datasets. + * This must be between 0 and 1 inclusive and + * indicates the weighting according to which chunks + * which have been fully read or written are + * penalized when determining which chunks to flush + * from cache. A value of 0 means fully read or + * written chunks are treated no differently than + * other chunks (the preemption is strictly LRU) + * while a value of 1 means fully read or written + * chunks are always preempted before other chunks. + * If your application only reads or writes data once, + * this can be safely set to 1. Otherwise, this should + * be set lower depending on how often you re-read or + * re-write the same data. The default value is 0.75. + * If the value passed is #H5D_CHUNK_CACHE_W0_DEFAULT, + * then the property will not be set on the dataset + * access property list, and the parameter will come + * from the file access property list. + * + * \return \herr_t + * + * \details H5Pset_cache() sets the number of elements, the total number of + * bytes, and the preemption policy value for all datasets in a file + * on the file’s file access property list. + * + * The raw data chunk cache inserts chunks into the cache by first + * computing a hash value using the address of a chunk and then by + * using that hash value as the chunk’s index into the table of + * cached chunks. In other words, the size of this hash table and the + * number of possible hash values is determined by the \p rdcc_nslots + * parameter. If a different chunk in the cache has the same hash value, + * a collision will occur, which will reduce efficiency. If inserting + * the chunk into the cache would cause the cache to be too big, then + * the cache will be pruned according to the \p rdcc_w0 parameter. + * + * The \p mdc_nelmts parameter is no longer used; any value passed + * in that parameter will be ignored. + * + * \b Motivation: Setting raw data chunk cache parameters + * can be done with H5Pset_cache(), H5Pset_chunk_cache(), + * or a combination of both. H5Pset_cache() is used to + * adjust the chunk cache parameters for all datasets via + * a global setting for the file, and H5Pset_chunk_cache() + * is used to adjust the chunk cache parameters for + * individual datasets. When both are used, parameters + * set with H5Pset_chunk_cache() will override any parameters + * set with H5Pset_cache(). + * + * \note Optimum chunk cache parameters may vary widely depending + * on different data layout and access patterns. For datasets + * with low performance requirements for example, changing + * the cache settings can save memory. + * + * \note Note: Raw dataset chunk caching is not currently + * supported when using the MPI I/O and MPI POSIX file drivers + * in read/write mode; see H5Pset_fapl_mpio() and + * H5Pset_fapl_mpiposix(), respectively. When using one of these + * file drivers, all calls to H5Dread() and H5Dwrite() will access + * the disk directly, and H5Pset_cache() will have no effect on + * performance. + * + * \note Raw dataset chunk caching is supported when these drivers are + * used in read-only mode. + * + * \todo Check on H5Pset_fapl_mpio() and H5Pset_fapl_mpiposix(). + * + * \version 1.8.0 The use of the \p mdc_nelmts parameter was discontinued. + * Metadata cache configuration is managed with + * H5Pset_mdc_config() and H5Pget_mdc_config(). + * \version 1.6.0 The \p rdcc_nbytes and \p rdcc_nelmts parameters + * changed from type int to size_t. + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_cache(hid_t plist_id, int mdc_nelmts, size_t rdcc_nslots, size_t rdcc_nbytes, + double rdcc_w0); +/** + * \ingroup FAPL + * + * \brief Sets write tracking information for core driver, #H5FD_CORE + * + * \fapl_id{fapl_id} + * \param[in] is_enabled Boolean value specifying whether feature is + enabled + * \param[in] page_size Positive integer specifying size, in bytes, of + * write aggregation pages Value of 1 (one) enables + * tracking with no paging. + * + * \return \herr_t + * + * \details When a file is created or opened for writing using the core + * virtual file driver (VFD) with the backing store option + * turned on, the core driver can be configured to track + * changes to the file and write out only the modified bytes. + * + * This write tracking feature is enabled and disabled with \p + * is_enabled. The default setting is that write tracking is + * disabled, or off. + * + * To avoid a large number of small writes, changes can + * be aggregated into pages of a user-specified size, \p + * page_size. + * + * Setting \p page_size to 1 enables tracking with no page + * aggregation. + * + * The backing store option is set via the function + * H5Pset_fapl_core. + * + * \attention + * \parblock + * This function is only for use with the core VFD and must + * be used after the call to H5Pset_fapl_core(). It is an error + * to use this function with any other VFD. + * + * It is an error to use this function when the backing store + * flag has not been set using H5Pset_fapl_core(). + * + * This function only applies to the backing store write + * operation which typically occurs when the file is flushed + * or closed. This function has no relationship to the + * increment parameter passed to H5Pset_fapl_core(). + * + * For optimum performance, the \p page_size parameter should be + * a power of two. + * + * It is an error to set the page size to 0. + * \endparblock + * + * \version 1.8.14 C function modified in this release to return error + * if \p page_size is set to 0 (zero). + * \since 1.8.13 + * + */ +H5_DLL herr_t H5Pset_core_write_tracking(hid_t fapl_id, hbool_t is_enabled, size_t page_size); +/** + * \ingroup FAPL + * + * \brief Sets a file driver + * + * \plist_id + * \param[in] driver_id The new driver identifier + * \param[in] driver_info Optional struct containing driver properties + * + * \return \herr_t + * + * \details H5Pset_driver() sets the file driver, driver_id, for a file + * access or data transfer property list, \p plist_id, and + * supplies an optional struct containing the driver-specific + * properties, \p driver_info. + * + * The driver properties will be copied into the property list + * and the reference count on the driver will be incremented, + * allowing the caller to close the driver identifier but still + * use the property list. + * + * \version 1.8.2 Function publicized in this release; previous releases + * described this function only in the virtual file driver + * documentation. + * + */ +H5_DLL herr_t H5Pset_driver(hid_t plist_id, hid_t driver_id, const void *driver_info); +/** + * \ingroup FAPL + * + * \brief Sets the number of files that can be held open in an external + * link open file cache + * + * \par Motivation + * \parblock + * The <em>external link open file cache</em> holds files open after + * they have been accessed via an external link. This cache reduces + * the number of times such files are opened when external links are + * accessed repeatedly and can siginificantly improves performance in + * certain heavy-use situations and when low-level file opens or closes + * are expensive. + * + * H5Pset_elink_file_cache_size() sets the number of files + * that will be held open in an external link open file + * cache. H5Pget_elink_file_cache_size() retrieves the size of an existing + * cache; and H5Fclear_elink_file_cache() clears an existing cache without + * closing it. + * \endparblock + * + * \fapl_id{plist_id} + * \param[in] efc_size External link open file cache size in number of files + * <em>Default setting is 0 (zero).</em> + * + * \return \herr_t + * + * \details H5Pset_elink_file_cache_size() specifies the number of files + * that will be held open in an external link open file cache. + * + * The default external link open file cache size is 0 (zero), + * meaning that files accessed via an external link are not + * held open. Setting the cache size to a positive integer + * turns on the cache; setting the size back to zero turns it + * off. + * + * With this property set, files are placed in the external + * link open file cache cache when they are opened via an + * external link. Files are then held open until either + * they are evicted from the cache or the parent file is + * closed. This property setting can improve performance when + * external links are repeatedly accessed. + * + * When the cache is full, files will be evicted using a least + * recently used (LRU) scheme; the file which has gone the + * longest time without being accessed through the parent file + * will be evicted and closed if nothing else is holding that + * file open. + * + * Files opened through external links inherit the parent + * file’s file access property list by default, and therefore + * inherit the parent file’s external link open file cache + * setting. + * + * When child files contain external links of their own, the + * caches can form a graph of cached external files. Closing + * the last external reference to such a graph will recursively + * close all files in the graph, even if cycles are present. + * \par Example + * \parblock + * The following code sets up an external link open file cache that will + * hold open up to 8 files reached through external links: + * + * \code + * status = H5Pset_elink_file_cache_size(fapl_id, 8); + * \endcode + * \endparblock + * + * \since 1.8.7 + */ +H5_DLL herr_t H5Pset_elink_file_cache_size(hid_t plist_id, unsigned efc_size); +/** + * \ingroup FAPL + * + * \brief Controls the library's behavior of evicting metadata associated with + * a closed object + * + * \fapl_id + * \param[in] evict_on_close Whether the HDF5 object should be evicted on close + * + * \return \herr_t + * + * \details The library's metadata cache is fairly conservative about holding + * on to HDF5 object metadata(object headers, chunk index structures, + * etc.), which can cause the cache size to grow, resulting in memory + * pressure on an application or system. When enabled, the "evict on + * close" property will cause all metadata for an object to be evicted + * from the cache as long as metadata is not referenced by any other + * open object. + * + * This function only applies to file access property lists. + * + * The default library behavior is to not evict on object or file + * close. + * + * When applied to a file access property list, any subsequently opened + * object will inherit the "evict on close" property and will have + * its metadata evicted when the object is closed. + * + * \since 1.10.1 + * + */ +H5_DLL herr_t H5Pset_evict_on_close(hid_t fapl_id, hbool_t evict_on_close); +/** + * \ingroup FAPL + * + * \brief Sets offset property for low-level access to a file in a family of + * files + * + * \fapl_id + * \param[in] offset Offset in bytes within the HDF5 file + * + * \return \herr_t + * + * \details H5Pset_family_offset() sets the offset property in the file access + * property list \p fapl_id so that the user application can + * retrieve a file handle for low-level access to a particular member + * of a family of files. The file handle is retrieved with a separate + * call to H5Fget_vfd_handle() (or, in special circumstances, to + * H5FDget_vfd_handle(); see \ref VFL). + * + * The value of \p offset is an offset in bytes from the beginning of + * the HDF5 file, identifying a user-determined location within the + * HDF5 file. + * The file handle the user application is seeking is for the specific + * member-file in the associated family of files to which this offset + * is mapped. + * + * Use of this function is only appropriate for an HDF5 file written as + * a family of files with the \c FAMILY file driver. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_family_offset(hid_t fapl_id, hsize_t offset); +/** + * \ingroup FAPL + * + * \brief Sets the file close degree + * + * \fapl_id + * \param[in] degree Pointer to a location containing the file close + * degree property, the value of \p degree + * + * \return \herr_t + * + * \details H5Pset_fclose_degree() sets the file close degree property + * \p degree in the file access property list \p fapl_id. + * + * The value of \p degree determines how aggressively + * H5Fclose() deals with objects within a file that remain open + * when H5Fclose() is called to close that file. \p degree can + * have any one of four valid values: + * + * <table> + * <tr> + * <th>Degree name</th> + * <th>H5Fclose behavior with no open object in file</th> + * <th>H5Fclose behavior with open object(s) in file</th> + * </tr> + * <tr> + * <td>#H5F_CLOSE_WEAK</td> + * <td>Actual file is closed.</td> + * <td>Access to file identifier is terminated; actual file + * close is delayed until all objects in file are closed + * </td> + * </tr> + * <tr> + * <td>#H5F_CLOSE_SEMI</td> + * <td>Actual file is closed.</td> + * <td>Function returns FAILURE</td> + * </tr> + * <tr> + * <td>#H5F_CLOSE_STRONG</td> + * <td>Actual file is closed.</td> + * <td>All open objects remaining in the file are closed then + * file is closed</td> + * </tr> + * <tr> + * <td>#H5F_CLOSE_DEFAULT</td> + * <td>The VFL driver chooses the behavior. Currently, all VFL + * drivers set this value to #H5F_CLOSE_WEAK, except for the + * MPI-I/O driver, which sets it to #H5F_CLOSE_SEMI.</td> + * <td></td> + * </tr> + * + * </table> + * \warning If a file is opened multiple times without being closed, each + * open operation must use the same file close degree setting. + * For example, if a file is already open with #H5F_CLOSE_WEAK, + * an H5Fopen() call with #H5F_CLOSE_STRONG will fail. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_fclose_degree(hid_t fapl_id, H5F_close_degree_t degree); +/** + * \ingroup FAPL + * + * \brief Sets an initial file image in a memory buffer + * + * \fapl_id + * \param[in] buf_ptr Pointer to the initial file image, or + * NULL if no initial file image is desired + * \param[in] buf_len Size of the supplied buffer, or + * 0 (zero) if no initial image is desired + * + * \return \herr_t + * + * \details H5Pset_file_image() allows an application to provide a file image + * to be used as the initial contents of a file. + * Calling H5Pset_file_image()makes a copy of the buffer specified in + * \p buf_ptr of size \p buf_len. + * + * \par Motivation: + * H5Pset_file_image() and other elements of HDF5 are + * used to load an image of an HDF5 file into system memory and open + * that image as a regular HDF5 file. An application can then use the + * file without the overhead of disk I/O. + * + * \par Recommended Reading: + * This function is part of the file image + * operations feature set. It is highly recommended to study the guide + * [<em>HDF5 File Image Operations</em>] + * (https://portal.hdfgroup.org/display/HDF5/HDF5+File+Image+Operations + * ) before using this feature set. See the “See Also” section below + * for links to other elements of HDF5 file image operations. + * + * \see + * \li H5LTopen_file_image() + * \li H5Fget_file_image() + * \li H5Pget_file_image() + * \li H5Pset_file_image_callbacks() + * \li H5Pget_file_image_callbacks() + * + * \li [HDF5 File Image Operations] + * (https://portal.hdfgroup.org/display/HDF5/HDF5+File+Image+Operations) + * in [Advanced Topics in HDF5] + * (https://portal.hdfgroup.org/display/HDF5/Advanced+Topics+in+HDF5) + * + * \li Within H5Pset_file_image_callbacks(): + * \li Callback #H5FD_file_image_callbacks_t + * \li Callback #H5FD_file_image_op_t + * + * \version 1.8.13 Fortran subroutine added in this release. + * \since 1.8.9 + * + */ +H5_DLL herr_t H5Pset_file_image(hid_t fapl_id, void *buf_ptr, size_t buf_len); +/** + * \ingroup FAPL + * + * \brief Sets the callbacks for working with file images + * + * \note **Motivation:** H5Pset_file_image_callbacks() and other elements + * of HDF5 are used to load an image of an HDF5 file into system + * memory and open that image as a regular HDF5 file. An application + * can then use the file without the overhead of disk I/O.\n + * **Recommended Reading:** This function is part of the file + * image operations feature set. It is highly recommended to study + * the guide [HDF5 File Image Operations] + * (https://portal.hdfgroup.org/display/HDF5/HDF5+File+Image+Operations + * ) before using this feature set. See the “See Also” section below + * for links to other elements of HDF5 file image operations. + * + * \fapl_id + * \param[in,out] callbacks_ptr Pointer to the instance of the + * #H5FD_file_image_callbacks_t structure + * + * \return \herr_t \n + * **Failure Modes**: Due to interactions between this function and + * H5Pset_file_image() and H5Pget_file_image(), + * H5Pset_file_image_callbacks() will fail if a file image has + * already been set in the target file access property list, \p fapl_id. + * + * \details H5Pset_file_image_callbacks() sets callback functions for working + * with file images in memory. + * + * H5Pset_file_image_callbacks() allows an application to control the + * management of file image buffers through user defined callbacks. + * These callbacks can be used in the management of file image buffers + * in property lists and with certain file drivers. + * + * H5Pset_file_image_callbacks() must be used before any file image has + * been set in the file access property list. Once a file image has + * been set, the function will fail. + * + * The callback routines set up by H5Pset_file_image_callbacks() are + * invoked when a new file image buffer is allocated, when an existing + * file image buffer is copied or resized, or when a file image buffer + * is released from use. + * + * Some file drivers allow the use of user-defined callback functions + * for allocating, freeing, and copying the driver’s internal buffer, + * potentially allowing optimizations such as avoiding large \c malloc + * and \c memcpy operations, or to perform detailed logging. + * + * From the perspective of the HDF5 library, the operations of the + * \ref H5FD_file_image_callbacks_t.image_malloc "image_malloc", + * \ref H5FD_file_image_callbacks_t.image_memcpy "image_memcpy", + * \ref H5FD_file_image_callbacks_t.image_realloc "image_realloc", and + * \ref H5FD_file_image_callbacks_t.image_free "image_free" callbacks + * must be identical to those of the + * corresponding C standard library calls (\c malloc, \c memcpy, + * \c realloc, and \c free). While the operations must be identical, + * the file image callbacks have more parameters. The return values + * of \ref H5FD_file_image_callbacks_t.image_malloc "image_malloc" and + * \ref H5FD_file_image_callbacks_t.image_realloc "image_realloc" are identical to + * the return values of \c malloc and \c realloc. The return values of + * \ref H5FD_file_image_callbacks_t.image_malloc "image_malloc" and + * \ref H5FD_file_image_callbacks_t.image_free "image_free" differ from the return + * values of \c memcpy and \c free in that the return values of + * \ref H5FD_file_image_callbacks_t.image_memcpy "image_memcpy" and + * \ref H5FD_file_image_callbacks_t.image_free "image_free" can also indicate failure. + * + * The callbacks and their parameters, along with a struct and + * an \c ENUM required for their use, are described below. + * + * <b>Callback struct and \c ENUM:</b> + * + * The callback functions set up by H5Pset_file_image_callbacks() use + * a struct and an \c ENUM that are defined as follows + * + * The struct #H5FD_file_image_callbacks_t serves as a container + * for the callback functions and a pointer to user-supplied data. + * The struct is defined as follows: + * \snippet H5FDpublic.h H5FD_file_image_callbacks_t_snip + * + * Elements of the #H5FD_file_image_op_t are used by the + * callbacks to invoke certain operations on file images. The ENUM is + * defined as follows: + * \snippet H5FDpublic.h H5FD_file_image_op_t_snip + * + * The elements of the #H5FD_file_image_op_t are used in the following + * callbacks: + * + * - The \ref H5FD_file_image_callbacks_t.image_malloc "image_malloc" callback + * contains a pointer to a function that must appear to HDF5 to have + * functionality identical to that of the standard C library \c malloc() call. + * + * - Signature in #H5FD_file_image_callbacks_t: + * \snippet H5FDpublic.h image_malloc_snip + * \n + * - The \ref H5FD_file_image_callbacks_t.image_memcpy "image_memcpy" + * callback contains a pointer to a function + * that must appear to HDF5 to have functionality identical to that + * of the standard C library \c memcopy() call, except that it returns + * a \p NULL on failure. (The \c memcpy C Library routine is defined + * to return the \p dest parameter in all cases.) + * + * - Setting \ref H5FD_file_image_callbacks_t.image_memcpy "image_memcpy" + * to \c NULL indicates that HDF5 should invoke + * the standard C library \c memcpy() routine when copying buffers. + * + * - Signature in #H5FD_file_image_callbacks_t: + * \snippet H5FDpublic.h image_memcpy_snip + * \n + * - The \ref H5FD_file_image_callbacks_t.image_realloc "image_realloc" callback + * contains a pointer to a function that must appear to HDF5 to have + * functionality identical to that of the standard C library \c realloc() call. + * + * - Setting \ref H5FD_file_image_callbacks_t.image_realloc "image_realloc" + * to \p NULL indicates that HDF5 should + * invoke the standard C library \c realloc() routine when resizing + * file image buffers. + * + * - Signature in #H5FD_file_image_callbacks_t: + * \snippet H5FDpublic.h image_realloc_snip + * \n + * - The \ref H5FD_file_image_callbacks_t.image_free "image_free" callback contains + * a pointer to a function that must appear to HDF5 to have functionality + * identical to that of the standard C library \c free() call, except + * that it will return \c 0 (\c SUCCEED) on success and \c -1 (\c FAIL) on failure. + * + * - Setting \ref H5FD_file_image_callbacks_t.image_free "image_free" + * to \c NULL indicates that HDF5 should invoke + * the standard C library \c free() routine when releasing file image + * buffers. + * + * - Signature in #H5FD_file_image_callbacks_t: + * \snippet H5FDpublic.h image_free_snip + * \n + * - The \ref H5FD_file_image_callbacks_t.udata_copy "udata_copy" + * callback contains a pointer to a function + * that, from the perspective of HDF5, allocates a buffer of suitable + * size, copies the contents of the supplied \p udata into the new + * buffer, and returns the address of the new buffer. The function + * returns NULL on failure. This function is necessary if a non-NULL + * \p udata parameter is supplied, so that property lists containing + * the image callbacks can be copied. If the \p udata parameter below + * is \c NULL, then this parameter should be \c NULL as well. + * + * - Signature in #H5FD_file_image_callbacks_t: + * \snippet H5FDpublic.h udata_copy_snip + * \n + * - The \ref H5FD_file_image_callbacks_t.udata_free "udata_free" + * callback contains a pointer to a function + * that, from the perspective of HDF5, frees a user data block. This + * function is necessary if a non-NULL udata parameter is supplied so + * that property lists containing image callbacks can be discarded + * without a memory leak. If the udata parameter below is \c NULL, + * this parameter should be \c NULL as well. + * + * - Signature in #H5FD_file_image_callbacks_t: + * \snippet H5FDpublic.h udata_free_snip + * + * - \p **udata**, the final field in the #H5FD_file_image_callbacks_t + * struct, provides a pointer to user-defined data. This pointer will + * be passed to the + * \ref H5FD_file_image_callbacks_t.image_malloc "image_malloc", + * \ref H5FD_file_image_callbacks_t.image_memcpy "image_memcpy", + * \ref H5FD_file_image_callbacks_t.image_realloc "image_realloc", and + * \ref H5FD_file_image_callbacks_t.image_free "image_free" callbacks. + * Define udata as \c NULL if no user-defined data is provided. + * + * \since 1.8.9 + * + */ +H5_DLL herr_t H5Pset_file_image_callbacks(hid_t fapl_id, H5FD_file_image_callbacks_t *callbacks_ptr); +/** + * \ingroup FAPL + * + * \brief Sets the file locking property values + * + * \fapl_id + * \param[in] use_file_locking Toggle to specify file locking (or not) + * \param[in] ignore_when_disabled Toggle to ignore when disabled (or not) + * + * \return \herr_t + * + * \details H5Pset_file_locking() overrides the default file locking flag + * setting that was set when the library was configured. + * + * This setting can be overridden by the \c HDF5_USE_FILE_LOCKING + * environment variable. + * + * File locking is used when creating/opening a file to prevent + * problematic file accesses. + * + * \since 1.10.7 + * + */ +H5_DLL herr_t H5Pset_file_locking(hid_t fapl_id, hbool_t use_file_locking, hbool_t ignore_when_disabled); +/** + * \ingroup FAPL + * + * \brief Sets garbage collecting references flag + * + * \fapl_id + * \param[in] gc_ref Flag setting reference garbage collection to on (1) or off (0) + * + * \return \herr_t + * + * \details H5Pset_gc_references() sets the flag for garbage collecting + * references for the file. + * + * Dataset region references and other reference types use space in an + * HDF5 file's global heap. If garbage collection is on and the user + * passes in an uninitialized value in a reference structure, the heap + * might get corrupted. When garbage collection is off, however, and + * the user re-uses a reference, the previous heap block will be + * orphaned and not returned to the free heap space. + * + * When garbage collection is on, the user must initialize the + * reference structures to 0 or risk heap corruption. + * + * The default value for garbage collecting references is off. + * + */ +H5_DLL herr_t H5Pset_gc_references(hid_t fapl_id, unsigned gc_ref); +/** + * \ingroup FAPL + * + * \brief Controls the range of library release versions used when creating + * objects in a file + * + * \fapl_id{plist_id} + * \param[in] low The earliest version of the library that will be used + * for writing objects + * \param[in] high The latest version of the library that will be used for + * writing objects + * + * \return \herr_t + * + * \details H5Pset_libver_bounds() controls the range of library release + * versions that will be used when creating objects in a file. + * The object format versions are determined indirectly from the + * library release versions specified in the call. + * + * This property is set in the file access property list + * specified by the parameter \p fapl_id. + * + * The parameter \p low sets the earliest possible format + * versions that the library will use when creating objects in + * the file. Note that earliest possible is different from + * earliest, as some features introduced in library versions + * later than 1.0.0 resulted in updates to object formats. + * The parameter \p high sets the latest format versions that + * the library will be allowed to use when creating objects in + * the file. + * + * The parameters \p low and \p high must be one of the + * enumerated values in the #H5F_libver_t struct, which is + * defined in H5Fpublic.h. + * + * The macro #H5F_LIBVER_LATEST is aliased to the highest + * enumerated value in #H5F_libver_t, indicating that this is + * currently the latest format available. + * + * The library supports the following five pairs of + * (\p low, \p high) combinations as derived from the values + * in #H5F_libver_t: + * + * <table> + * <tr> + * <th>Value of \p low and \p high</th> + * <th>Result</th> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_EARLIEST<br /> + * \p high=#H5F_LIBVER_V18</td> + * <td> + * \li The library will create objects with the earliest + * possible format versions. + * \li The library will allow objects to be created with the + * latest format versions available to library release 1.8.x. + * \li API calls that create objects or features that are + * available to versions of the library greater than 1.8.x + * release will fail. + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_EARLIEST<br /> + * \p high=#H5F_LIBVER_V110</td> + * <td> + * \li The library will create objects with the earliest possible + * format versions. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.10.x. + * Since 1.10.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. For example, if a newer + * format version is required to support a feature e.g. virtual + * dataset, this setting will allow the object to be created. + * \li This is the library default setting and provides the greatest + * format compatibility. + * </td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V18<br /> + * \p high=#H5F_LIBVER_V18</td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.8.x. + * \li API calls that create objects or features that are available + * to versions of the library greater than 1.8.x release will + * fail. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V18<br /> + * \p high=#H5F_LIBVER_V110</td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.8.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.10.x. + * Since 1.10.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. For example, if a + * newer format version is required to support a feature e.g. + * virtual dataset, this setting will allow the object to be + * created. + * \li Earlier versions of the library may not be able to access + * objects created with this setting.</td> + * </tr> + * <tr> + * <td>\p low=#H5F_LIBVER_V110<br /> + * \p high=#H5F_LIBVER_V110 + * </td> + * <td> + * \li The library will create objects with the latest format + * versions available to library release 1.10.x. + * \li The library will allow objects to be created with the latest + * format versions available to library release 1.10.x. + * Since 1.10.x is also #H5F_LIBVER_LATEST, there is no upper + * limit on the format versions to use. For example, if a + * newer format version is required to support a feature e.g. + * virtual dataset, this setting will allow the object to be + * created. + * \li This setting allows users to take advantage of the latest + * features and performance enhancements in the library. + * However, objects written with this setting may be + * accessible to a smaller range of library versions than + * would be the case if low is set to #H5F_LIBVER_EARLIEST. + * \li Earlier versions of the library may not be able to access + * objects created with this + * setting. + * </td> + * </tr> + * </table> + * + * \version 1.10.2 #H5F_LIBVER_V18 added to the enumerated defines in + * #H5F_libver_t. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_libver_bounds(hid_t plist_id, H5F_libver_t low, H5F_libver_t high); +/** + * \ingroup FAPL + * + * \brief Set the initial metadata cache configuration in the indicated File + * Access Property List to the supplied value + * + * \fapl_id{plist_id} + * \param[in] config_ptr Pointer to the instance of \p H5AC_cache_config_t + * containing the desired configuration + * \return \herr_t + * + * \details The fields of the #H5AC_cache_config_t structure are shown + * below: + * \snippet H5ACpublic.h H5AC_cache_config_t_snip + * \click4more + * + * \details H5Pset_mdc_config() attempts to set the initial metadata cache + * configuration to the supplied value. It will fail if an invalid + * configuration is detected. This configuration is used when the file + * is opened. + * + * See the overview of the metadata cache in the special topics section + * of the user manual for details on what is being configured. If you + * have not read and understood that documentation, you really should + * not be using this API call. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_mdc_config(hid_t plist_id, H5AC_cache_config_t *config_ptr); +/** + * \ingroup FAPL + * + * \brief Sets metadata cache logging options + * + * \fapl_id{plist_id} + * \param[in] is_enabled Whether logging is enabled + * \param[in] location Location of log in UTF-8/ASCII (file path/name) + * (On Windows, this must be ASCII) + * \param[in] start_on_access Whether the logging will begin as soon as the + * file is opened or created + * + * \return \herr_t + * + * \details The metadata cache is a central part of the HDF5 library through + * which all file metadata reads and writes take place. File metadata + * is normally invisible to the user and is used by the library for + * purposes such as locating and indexing data. File metadata should + * not be confused with user metadata, which consists of attributes + * created by users and attached to HDF5 objects such as datasets via + * H5A API calls. + * + * Due to the complexity of the cache, a trace/logging feature has + * been created that can be used by HDF5 developers for debugging and + * performance analysis. The functions that control this functionality + * will normally be of use to a very limited number of developers + * outside of The HDF Group. The functions have been documented to + * help users create logs that can be sent with bug reports. + * + * Control of the log functionality is straightforward. Logging is + * enabled via the H5Pset_mdc_log_options() function, + * which will modify the file access property list used to open or + * create a file. This function has a flag that determines whether + * logging begins at file open or starts in a paused state. Log + * messages can then be controlled via the H5Fstart_mdc_logging() + * and H5Fstop_mdc_logging() function. + * + * H5Pget_mdc_log_options() can be used to examine a file access + * property list, and H5Fget_mdc_logging_status() will return the + * current state of the logging flags. + * + * The log format is described in [<em>Metadata Cache Logging</em>] + * (https://portal.hdfgroup.org/display/HDF5/Fine-tuning+the+Metadata+Cache). + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pset_mdc_log_options(hid_t plist_id, hbool_t is_enabled, const char *location, + hbool_t start_on_access); +/** + * \ingroup FAPL + * + * \brief Sets the minimum metadata block size + * + * \fapl_id{fapl_id} + * \param[in] size Minimum size, in bytes, of metadata block allocations + * + * \return \herr_t + * + * \details H5Pset_meta_block_size() sets the minimum size, in bytes, of + * metadata block allocations when #H5FD_FEAT_AGGREGATE_METADATA is set by a VFL + * driver. + + * Each raw metadata block is initially allocated to be of the given size. + * Specific metadata objects (e.g., object headers, local heaps, B-trees) are then + * sub-allocated from this block. + * + * The default setting is 2048 bytes, meaning that the library will + * attempt to aggregate metadata in at least 2K blocks in the file. + * Setting the value to zero (\Code{0}) with this function will turn + * off metadata aggregation, even if the VFL driver attempts to use the + * metadata aggregation strategy. + * + * Metadata aggregation reduces the number of small data objects in the file that + * would otherwise be required for metadata. The aggregated block of metadata is + * usually written in a single write action and always in a contiguous block, + * potentially significantly improving library and application performance. + * + * \since 1.4.0 + */ +H5_DLL herr_t H5Pset_meta_block_size(hid_t fapl_id, hsize_t size); +/** + * \ingroup FAPL + * + * \brief Sets the number of read attempts in a file access property list + * + * \fapl_id{plist_id} + * \param[in] attempts The number of read attempts. Must be a value greater than \Code{0} + * + * \return \herr_t + * + * \return Failure Modes: + * - When the user sets the number of read attempts to \Code{0}. + * - When the input property list is not a file access property list. + * - When the library is unable to set the number of read attempts in the file access property list. + * + * \details H5Pset_metadata_read_attempts() sets the number of reads that the + * library will try when reading checksummed metadata in an HDF5 file opened + * with SWMR access. When reading such metadata, the library will compare the + * checksum computed for the metadata just read with the checksum stored within + * the piece of checksum. When performing SWMR operations on a file, the + * checksum check might fail when the library reads data on a system that is not + * atomic. To remedy such situations, the library will repeatedly read the piece + * of metadata until the check passes or finally fails the read when the allowed + * number of attempts is reached. + * + * The number of read attempts used by the library will depend on how the file is + * opened and whether the user sets the number of read attempts via this routine: + + * - For a file opened with SWMR access: + * - If the user sets the number of attempts to \Code{N}, the library will use \Code{N}. + * - If the user does not set the number of attempts, the library will use the + * default for SWMR access (\Code{100}). + * - For a file opened with non-SWMR access, the library will always use the default + * for non-SWMR access (\Code{1}). The value set via this routine does not have any effect + * during non-SWMR access. + * + * \b Example: The first example illustrates the case in setting the number of read attempts for a file + * opened with SWMR access. + * + * \snippet H5Pset_metadata_read_attempts.c SWMR Access + * + * \b Example: The second example illustrates the case in setting the number of + * read attempts for a file opened with non-SWMR access. The value + * set in the file access property list does not have any effect. + * + * \snippet H5Pset_metadata_read_attempts.c non-SWMR Access + * + * \note \b Motivation: On a system that is not atomic, the library might + * possibly read inconsistent metadata with checksum when performing + * single-writer/multiple-reader (SWMR) operations for an HDF5 file. Upon + * encountering such situations, the library will try reading the metadata + * again to obtain consistent data. This routine provides the means to set + * the number of read attempts other than the library default. + * + * \since 1.10.0 + */ +H5_DLL herr_t H5Pset_metadata_read_attempts(hid_t plist_id, unsigned attempts); +/** + * \ingroup FAPL + * + * \brief Specifies type of data to be accessed via the \Code{MULTI} driver, + * enabling more direct access + * + * \fapl_id{fapl_id} + * \param[in] type Type of data to be accessed + * + * \return \herr_t + * + * \details H5Pset_multi_type() sets the \Emph{type of data} property in the file + * access property list \p fapl_id. This setting enables a user + * application to specify the type of data the application wishes to + * access so that the application can retrieve a file handle for + * low-level access to the particular member of a set of \Code{MULTI} + * files in which that type of data is stored. The file handle is + * retrieved with a separate call to H5Fget_vfd_handle() (or, in special + * circumstances, to H5FDget_vfd_handle(); see \ref VFL. + * + * The type of data specified in \p type may be one of the following: + * + * <table> + * <tr> + * <td>#H5FD_MEM_SUPER</td> <td>Super block data</td> + * </tr> + * <tr> + * <td>#H5FD_MEM_BTREE</td> <td>B-tree data</td> + * </tr> + * <tr> + * <td>#H5FD_MEM_DRAW</td> <td>Dataset raw data</td> + * </tr> + * <tr> + * <td>#H5FD_MEM_GHEAP</td> <td>Global heap data</td> + * </tr> + * <tr> + * <td>#H5FD_MEM_LHEAP</td> <td>Local Heap data</td> + * </tr> + * <tr> + * <td>#H5FD_MEM_OHDR</td> <td>Object header data</td> + * </tr> + * </table> + * + * This function is for use only when accessing an HDF5 file written as a set of + * files with the \Code{MULTI} file driver. + * + * \since 1.6.0 + */ +H5_DLL herr_t H5Pset_multi_type(hid_t fapl_id, H5FD_mem_t type); +/** + * \ingroup FAPL + * + * \brief Sets a callback function to invoke when an object flush occurs in the file + * + * \fapl_id{plist_id} + * \op{func} + * \op_data_in{udata} + * + * \return \herr_t + * + * \details H5Pset_object_flush_cb() sets the callback function to invoke in the + * file access property list \p plist_id whenever an object flush occurs in + * the file. Library objects are group, dataset, and committed + * datatype. + * + * The callback function \p func must conform to the prototype defined below: + * \code + * typedef herr_t (*H5F_flush_cb_t)(hid_t object_id, void *user_data) + * \endcode + * + * The parameters of the callback function, per the above prototypes, are defined as follows: + * - \Code{object_id} is the identifier of the object which has just been flushed. + * - \Code{user_data} is the user-defined input data for the callback function. + * + * \b Example: The example below illustrates the usage of this routine to set + * the callback function to invoke when an object flush occurs. + * + * \include H5Pset_object_flush_cb.c + * + * \since 1.10.0 + */ +H5_DLL herr_t H5Pset_object_flush_cb(hid_t plist_id, H5F_flush_cb_t func, void *udata); +/** + * \ingroup FAPL + * + * \brief Sets the maximum size of the data sieve buffer + * + * \fapl_id{fapl_id} + * \param[in] size Maximum size, in bytes, of data sieve buffer + * + * \return \herr_t + * + * \details H5Pset_sieve_buf_size() sets \p size, the maximum size in bytes of the + * data sieve buffer, which is used by file drivers that are capable of + * using data sieving. + * + * The data sieve buffer is used when performing I/O on datasets in the + * file. Using a buffer which is large enough to hold several pieces of + * the dataset being read in for hyperslab selections boosts + * performance by quite a bit. + * + * The default value is set to 64KB, indicating that file I/O for raw + * data reads and writes will occur in at least 64KB blocks. Setting + * the value to zero (\Code{0}) with this API function will turn off + * the data sieving, even if the VFL driver attempts to use that + * strategy. + * + * Internally, the library checks the storage sizes of the datasets in + * the file. It picks the smaller one between the size from the file + * access property and the size of the dataset to allocate the sieve + * buffer for the dataset in order to save memory usage. + * + * \version 1.6.0 The \p size parameter has changed from type \Code{hsize_t} to \Code{size_t}. + * + * \since 1.4.0 + */ +H5_DLL herr_t H5Pset_sieve_buf_size(hid_t fapl_id, size_t size); +/** + * \ingroup FAPL + * + * \brief Sets the size of a contiguous block reserved for small data + * + * \fapl_id{fapl_id} + * \param[in] size Maximum size, in bytes, of the small data block. + The default size is \Code{2048}. + * + * \return \herr_t + * + * \details H5Pset_small_data_block_size() reserves blocks of \p size bytes for the + * contiguous storage of the raw data portion of \Emph{small} datasets. The + * HDF5 library then writes the raw data from small datasets to this + * reserved space, thus reducing unnecessary discontinuities within + * blocks of meta data and improving I/O performance. + * + * A small data block is actually allocated the first time a qualifying + * small dataset is written to the file. Space for the raw data portion + * of this small dataset is suballocated within the small data block. + * The raw data from each subsequent small dataset is also written to + * the small data block until it is filled; additional small data + * blocks are allocated as required. + * + * The HDF5 library employs an algorithm that determines whether I/O + * performance is likely to benefit from the use of this mechanism with + * each dataset as storage space is allocated in the file. A larger + * \p size will result in this mechanism being employed with larger + * datasets. + * + * The small data block size is set as an allocation property in the + * file access property list identified by \p fapl_id. + * + * Setting \p size to zero (\Code{0}) disables the small data block mechanism. + * + * \since 1.4.4 + */ +H5_DLL herr_t H5Pset_small_data_block_size(hid_t fapl_id, hsize_t size); #ifdef H5_HAVE_PARALLEL +/** + * \ingroup GACPL + * + * \brief Sets metadata I/O mode for read operations to collective or independent (default) + * + * \gacpl_id + * \param[in] is_collective Boolean value indicating whether metadata reads are collective + * (\Code{1}) or independent (\Code{0}). + * Default mode: Independent (\Code{0}) + * + * \return \herr_t + * + * \details H5Pset_all_coll_metadata_ops() sets the metadata I/O mode for read + * operations in the access property list \p plist_id. + * + * When engaging in parallel I/O, all metadata write operations must be + * collective. If \p is_collective is \Code{1}, this property specifies + * that the HDF5 library will perform all metadata read operations + * collectively; if \p is_collective is \Code{0}, such operations may + * be performed independently. + * + * Users must be aware that several HDF5 operations can potentially + * issue metadata reads. These include opening a dataset, datatype, or + * group; reading an attribute; or issuing a \Emph{get info} call such + * as getting information for a group with H5Fget_info(). Collective + * I/O requirements must be kept in mind when issuing such calls in the + * context of parallel I/O. + * + * If this property is collective on a file access property list that + * is used in creating or opening a file, then the HDF5 library will + * assume that all metadata read operations issued on that file + * identifier will be issued collectively from all ranks irrespective + * of the individual setting of a particular operation. If this + * assumption is not adhered to, corruption will be introduced in the + * metadata cache and HDF5’s behavior will be undefined. + * + * Alternatively, a user may wish to avoid setting this property + * globally on the file access property list, and individually set it + * on particular object access property lists (dataset, group, link, + * datatype, attribute access property lists) for certain operations. + * This will indicate that only the operations issued with such an + * access property list will be called collectively and other + * operations may potentially be called independently. There are, + * however, several HDF5 operations that can issue metadata reads but + * have no property list in their function signatures to allow passing + * the collective requirement property. For those operations, the only + * option is to set the global collective requirement property on the + * file access property list; otherwise the metadata reads that can be + * triggered from those operations will be done independently by each + * process. + * + * Functions that do not accommodate an access property list but that + * might issue metadata reads are listed in \ref maybe_metadata_reads. + * + * \attention As noted above, corruption will be introduced into the metadata + * cache and HDF5 library behavior will be undefined when both of the following + * conditions exist: + * - A file is created or opened with a file access property list in which the + * collective metadata I/O property is set to \Code{1}. + * - Any function is called that triggers an independent metadata read while the + * file remains open with that file access property list. + * + * \attention An approach that avoids this corruption risk is described above. + * + * \sa_metadata_ops + * + * \since 1.10.0 + */ H5_DLL herr_t H5Pset_all_coll_metadata_ops(hid_t plist_id, hbool_t is_collective); +/** + * \ingroup GACPL + * + * \brief Retrieves metadata read mode setting + * + * \gacpl_id + * \param[out] is_collective Pointer to a buffer containing the Boolean value indicating whether metadata + * reads are collective (\Code{>0}) or independent (\Code{0}). + * Default mode: Independent (\Code{0}) + * + * \return \herr_t + * + * \details H5Pget_all_coll_metadata_ops() retrieves the collective metadata read setting from the access + * property list \p plist_id into \p is_collective. + * + * \sa_metadata_ops + * + * \since 1.10.0 + */ H5_DLL herr_t H5Pget_all_coll_metadata_ops(hid_t plist_id, hbool_t *is_collective); +/** + * \ingroup FAPL + * + * \brief Sets metadata write mode to collective or independent (default) + * + * \fapl_id{plist_id} + * \param[out] is_collective Boolean value indicating whether metadata + * writes are collective (\Code{>0}) or independent (\Code{0}). + * \Emph{Default mode:} Independent (\Code{0}) + * \return \herr_t + * + * \details H5Pset_coll_metadata_write() tells the HDF5 library whether to + * perform metadata writes collectively (1) or independently (0). + * + * If collective access is selected, then on a flush of the metadata + * cache, all processes will divide the metadata cache entries to be + * flushed evenly among themselves and issue a single MPI-IO collective + * write operation. This is the preferred method when the size of the + * metadata created by the application is large. + * + * If independent access is selected, the library uses the default + * method for doing metadata I/O either from process zero or + * independently from each process. + * + * \sa_metadata_ops + * + * \since 1.10.0 + */ H5_DLL herr_t H5Pset_coll_metadata_write(hid_t plist_id, hbool_t is_collective); +/** + * \ingroup FAPL + * + * \brief Retrieves metadata write mode setting + * + * \fapl_id{plist_id} + * \param[out] is_collective Pointer to a boolean value indicating whether + * metadata writes are collective (\Code{>0}) or independent (\Code{0}). + * \Emph{Default mode:} Independent (\Code{0}) + * \return \herr_t + * + * \details H5Pget_coll_metadata_write() retrieves the collective metadata write + * setting from the file access property into \p is_collective. + * + * \sa_metadata_ops + * + * \since 1.10.0 + */ H5_DLL herr_t H5Pget_coll_metadata_write(hid_t plist_id, hbool_t *is_collective); #endif /* H5_HAVE_PARALLEL */ +/** + * \ingroup FAPL + * + * \brief Sets the metadata cache image option for a file access property list + * + * \fapl_id{plist_id} + * \param[out] config_ptr Pointer to metadata cache image configuration values + * \return \herr_t + * + * \details H5Pset_mdc_image_config() sets the metadata cache image option with + * configuration values specified by \p config_ptr for the file access + * property list specified in \p plist_id. + * + * #H5AC_cache_image_config_t is defined as follows: + * \snippet H5ACpublic.h H5AC_cache_image_config_t_snip + * \click4more + * + * \par Limitations: While it is an obvious error to request a cache image when + * opening the file read only, it is not in general possible to test for + * this error in the H5Pset_mdc_image_config() call. Rather than fail the + * subsequent file open, the library silently ignores the file image + * request in this case.\n It is also an error to request a cache image on + * a file that does not support superblock extension messages (i.e. a + * superblock version less than 2). As above, it is not always possible to + * detect this error in the H5Pset_mdc_image_config() call, and thus the + * request for a cache image will fail silently in this case as well.\n + * Creation of cache images is currently disabled in parallel -- as above, + * any request for a cache image in this context will fail silently.\n + * Files with cache images may be read in parallel applications, but note + * that the load of the cache image is a collective operation triggered by + * the first operation that accesses metadata after file open (or, if + * persistent free space managers are enabled, on the first allocation or + * deallocation of file space, or read of file space manager status, + * whichever comes first). Thus the parallel process may deadlock if any + * process does not participate in this access.\n + * In long sequences of file closes and opens, infrequently accessed + * metadata can accumulate in the cache image to the point where the cost + * of storing and restoring this metadata exceeds the benefit of retaining + * frequently used metadata in the cache image. When implemented, the + * #H5AC_cache_image_config_t::entry_ageout should address this problem. In + * the interim, not requesting a cache image every n file close/open cycles + * may be an acceptable work around. The choice of \c n will be driven by + * application behavior, but \Code{n = 10} seems a good starting point. + * + * \since 1.10.1 + */ H5_DLL herr_t H5Pset_mdc_image_config(hid_t plist_id, H5AC_cache_image_config_t *config_ptr); -H5_DLL herr_t H5Pget_mdc_image_config(hid_t plist_id, H5AC_cache_image_config_t *config_ptr /*out*/); +/** + * \ingroup FAPL + * + * \brief Sets the maximum size for the page buffer and the minimum percentage + * for metadata and raw data pages + * + * \fapl_id{plist_id} + * \param[in] buf_size Maximum size, in bytes, of the page buffer + * \param[in] min_meta_per Minimum metadata percentage to keep in the page buffer + * before allowing pages containing metadata to be evicted (Default is 0) + * \param[in] min_raw_per Minimum raw data percentage to keep in the page buffer + * before allowing pages containing raw data to be evicted (Default is 0) + * \return \herr_t + * + * \details H5Pset_page_buffer_size() sets buf_size, the maximum size in bytes + * of the page buffer. The default value is zero, meaning that page + * buffering is disabled. When a non-zero page buffer size is set, the + * library will enable page buffering if that size is larger or equal + * than a single page size if a paged file space strategy is enabled + * using the functions H5Pset_file_space_strategy() and + * H5Pset_file_space_page_size(). + * + * The page buffer layer captures all I/O requests before they are + * issued to the VFD and "caches" them in fixed sized pages. Once the + * total number of pages exceeds the page buffer size, the library + * evicts pages from the page buffer by writing them to the VFD. At + * file close, the page buffer is flushed writing all the pages to the + * file. + * + * If a non-zero page buffer size is set, and the file space strategy + * is not set to paged or the page size for the file space strategy is + * larger than the page buffer size, the subsequent call to H5Fcreate() + * or H5Fopen() using the \p plist_id will fail. + * + * The function also allows setting the minimum percentage of pages for + * metadata and raw data to prevent a certain type of data to evict hot + * data of the other type. + * + * \since 1.10.1 + * + */ H5_DLL herr_t H5Pset_page_buffer_size(hid_t plist_id, size_t buf_size, unsigned min_meta_per, unsigned min_raw_per); -H5_DLL herr_t H5Pget_page_buffer_size(hid_t plist_id, size_t *buf_size, unsigned *min_meta_per, - unsigned *min_raw_per); /* Dataset creation property list (DCPL) routines */ -H5_DLL herr_t H5Pset_layout(hid_t plist_id, H5D_layout_t layout); +/** + * \ingroup DCPL + * + * \brief Determines whether fill value is defined + * + * \dcpl_id{plist} + * \param[out] status Status of fill value in property list + * + * \return \herr_t + * + * \details H5Pfill_value_defined() determines whether a fill value is + * defined in the dataset creation property list \p plist. Valid + * values returned in status are as follows: + * + * <table> + * <tr> + * <td>#H5D_FILL_VALUE_UNDEFINED</td> + * <td>Fill value is undefined.</td> + * </tr> + * <tr> + * <td>#H5D_FILL_VALUE_DEFAULT</td> + * <td>Fill value is the library default.</td> + * </tr> + * <tr> + * <td>#H5D_FILL_VALUE_USER_DEFINED</td> + * <td>Fill value is defined by the application.</td> + * </tr> + * </table> + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pfill_value_defined(hid_t plist, H5D_fill_value_t *status); +/** + * \ingroup DCPL + * + * \brief Retrieves the timing for storage space allocation + * + * \dcpl_id{plist_id} + * \param[out] alloc_time The timing setting for allocating dataset + * storage space + * + * \return \herr_t + * + * \details H5Pget_alloc_time() retrieves the timing for allocating storage + * space for a dataset's raw data. This property is set in the + * dataset creation property list \p plist_id. The timing setting + * is returned in \p alloc_time as one of the following values: + * + * <table> + * <tr> + * <td>#H5D_ALLOC_TIME_DEFAULT<br /> </td> + * <td>Uses the default allocation time, based on the dataset + * storage method. <br />See the \p alloc_time description in + * H5Pset_alloc_time() for default allocation times for + * various storage methods.</td> + * </tr> + * <tr> + * <td>#H5D_ALLOC_TIME_EARLY</td> + * <td>All space is allocated when the dataset is created.</td> + * </tr> + * <tr> + * <td>#H5D_ALLOC_TIME_INCR</td> + * <td>Space is allocated incrementally as data is written + * to the dataset.</td> + * </tr> + * <tr> + * <td>#H5D_ALLOC_TIME_LATE</td> + * <td>All space is allocated when data is first written to + * the dataset.</td> + * </tr> + * </table> + * + * \note H5Pget_alloc_time() is designed to work in concert with the + * dataset fill value and fill value write time properties, set + * with the functions H5Pget_fill_value() and H5Pget_fill_time(). + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pget_alloc_time(hid_t plist_id, H5D_alloc_time_t *alloc_time /*out*/); +/** + * \ingroup DCPL + * + * \brief Retrieves the size of chunks for the raw data of a chunked + * layout dataset + * + * \dcpl_id{plist_id} + * \param[in] max_ndims Size of the \p dims array + * \param[out] dim Array to store the chunk dimensions + * + * \return Returns chunk dimensionality if successful; + * otherwise returns a negative value. + * + * \details H5Pget_chunk() retrieves the size of chunks for the raw data + * of a chunked layout dataset. This function is only valid for + * dataset creation property lists. At most, \p max_ndims elements + * of \p dim will be initialized. + * + * \since 1.0.0 + * + */ +H5_DLL int H5Pget_chunk(hid_t plist_id, int max_ndims, hsize_t dim[] /*out*/); +/** + * + * \ingroup DCPL + * + * \brief Retrieves the edge chunk option setting from a dataset creation + * property list + * + * \dcpl_id{plist_id} + * \param[out] opts Edge chunk option flag. Valid values are described in + * H5Pset_chunk_opts(). The option status can be + * retrieved using the bitwise AND operator ( & ). For + * example, the expression + * (opts&#H5D_CHUNK_DONT_FILTER_PARTIAL_CHUNKS) will + * evaluate to #H5D_CHUNK_DONT_FILTER_PARTIAL_CHUNKS if + * that option has been enabled. Otherwise, it will + * evaluate to 0 (zero). + * + * \return \herr_t + * + * \details H5Pget_chunk_opts() retrieves the edge chunk option setting + * stored in the dataset creation property list \p plist_id. + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pget_chunk_opts(hid_t plist_id, unsigned *opts); +/** + * \ingroup DCPL + * + * \brief Retrieves the setting for whether or not to create minimized + * dataset object headers + * + * \dcpl_id + * \param[out] minimize Flag indicating whether the library will or will + * not create minimized dataset object headers + * + * \return \herr_t + * + * \details H5Pget_dset_no_attrs_hint() retrieves the + * <i>no dataset attributes</i> hint setting for the dataset + * creation property list \p dcpl_id. This setting is used to + * inform the library to create minimized dataset object headers + * when TRUE. The setting value is returned in the boolean pointer + * \p minimize. + * + * \since 1.10.5 + * + */ +H5_DLL herr_t H5Pget_dset_no_attrs_hint(hid_t dcpl_id, hbool_t *minimize); +/** + * \ingroup DCPL + * + * \brief Returns information about an external file + * + * \dcpl_id{plist_id} + * \param[in] idx External file index + * \param[in] name_size Maximum length of \p name array + * \param[out] name Name of the external file + * \param[out] offset Pointer to a location to return an offset value + * \param[out] size Pointer to a location to return the size of the + * external file data + * + * \return \herr_t + * + * \details H5Pget_external() returns information about an external file. + * The external file is specified by its index, \p idx, which + * is a number from zero to N-1, where N is the value returned + * by H5Pget_external_count(). At most \p name_size characters + * are copied into the \p name array. If the external file name + * is longer than \p name_size with the null terminator, the + * return value is not null terminated (similar to strncpy()). + * + * If \p name_size is zero or \p name is the null pointer, the + * external file name is not returned. If \p offset or \p size + * are null pointers then the corresponding information is not + * returned. + * + * \version 1.6.4 \p idx parameter type changed to unsigned. + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pget_external(hid_t plist_id, unsigned idx, size_t name_size, char *name /*out*/, + off_t *offset /*out*/, hsize_t *size /*out*/); +/** + * \ingroup DCPL + * + * \brief Returns the number of external files for a dataset + * + * \dcpl_id{plist_id} + * + * \return Returns the number of external files if successful; otherwise + * returns a negative value. + * + * \details H5Pget_external_count() returns the number of external files + * for the specified dataset. + * + * \since 1.0.0 + * + */ +H5_DLL int H5Pget_external_count(hid_t plist_id); +/** + * \ingroup DCPL + * + * \brief Retrieves the time when fill values are written to a dataset + * + * \dcpl_id{plist_id} + * \param[out] fill_time Setting for the timing of writing fill values to + * the dataset + * + * \return \herr_t + * + * \details H5Pget_fill_time() examines the dataset creation property list + * \p plist_id to determine when fill values are to be written to + * a dataset. Valid values returned in \p fill_time are as + * follows: + * + * <table> + * <tr> + * <td>#H5D_FILL_TIME_IFSET</td> + * <td>Fill values are written to the dataset when storage + * space is allocated only if there is a user-defined fill + * value, i.e., one set with H5Pset_fill_value(). (Default) + * </td> + * </tr> + * <tr> + * <td>#H5D_FILL_TIME_ALLOC</td> + * <td>Fill values are written to the dataset when storage + * space is allocated.</td> + * </tr> + * <tr> + * <td>#H5D_FILL_TIME_NEVER</td> + * <td>Fill values are never written to the dataset.</td> + * </tr> + * </table> + * + * \note H5Pget_fill_time() is designed to work in coordination with the + * dataset fill value and dataset storage allocation time properties, + * retrieved with the functions H5Pget_fill_value() and + * H5Pget_alloc_time(). + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pget_fill_time(hid_t plist_id, H5D_fill_time_t *fill_time /*out*/); +/** + * \ingroup DCPL + * + * \brief Retrieves a dataset fill value + * + * \dcpl_id{plist_id} + * \param[in] type_id Datatype identifier for the value passed via + * \p value + * \param[out] value Pointer to buffer to contain the returned + * fill value + * + * \return \herr_t + * + * \details H5Pget_fill_value() returns the dataset fill value defined in + * the dataset creation property list \p plist_id. The fill value + * is returned through the \p value pointer and will be converted + * to the datatype specified by \p type_id. This datatype may + * differ from the fill value datatype in the property list, but + * the HDF5 library must be able to convert between the two + * datatypes. + * + * If the fill value is undefined, i.e., set to NULL in the + * property list, H5Pget_fill_value() will return an error. + * H5Pfill_value_defined() should be used to check for this + * condition before H5Pget_fill_value() is called. + * + * Memory must be allocated by the calling application. + * + * \note H5Pget_fill_value() is designed to coordinate with the dataset + * storage allocation time and fill value write time properties, + * which can be retrieved with the functions H5Pget_alloc_time() + * and H5Pget_fill_time(), respectively. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pget_fill_value(hid_t plist_id, hid_t type_id, void *value /*out*/); +/** + * \ingroup DCPL + * + * \brief Returns the layout of the raw data for a dataset + * + * \dcpl_id{plist_id} + * + * \return Returns the layout type (a non-negative value) of a dataset + * creation property list if successful. Valid return values are: + * - #H5D_COMPACT: Raw data is stored in the object header in the + * file. + * - #H5D_CONTIGUOUS: Raw data is stored separately from the object + * header in one contiguous chunk in the file. + * - #H5D_CHUNKED: Raw data is stored separately from the object + * header in chunks in separate locations in the + * file. + * - #H5D_VIRTUAL: Raw data is drawn from multiple datasets in + * different files. + * \return + * Otherwise, returns a negative value indicating failure. + * + * \details H5Pget_layout() returns the layout of the raw data for a + * dataset. This function is only valid for dataset creation + * property lists. + * + * Note that a compact storage layout may affect writing data to + * the dataset with parallel applications. See the H5Dwrite() + * documentation for details. + * + * \version 1.10.0 #H5D_VIRTUAL added in this release. + * + * \since 1.0.0 + * + */ H5_DLL H5D_layout_t H5Pget_layout(hid_t plist_id); -H5_DLL herr_t H5Pset_chunk(hid_t plist_id, int ndims, const hsize_t dim[/*ndims*/]); -H5_DLL int H5Pget_chunk(hid_t plist_id, int max_ndims, hsize_t dim[] /*out*/); -H5_DLL herr_t H5Pset_virtual(hid_t dcpl_id, hid_t vspace_id, const char *src_file_name, - const char *src_dset_name, hid_t src_space_id); -H5_DLL herr_t H5Pget_virtual_count(hid_t dcpl_id, size_t *count /*out*/); -H5_DLL hid_t H5Pget_virtual_vspace(hid_t dcpl_id, size_t index); -H5_DLL hid_t H5Pget_virtual_srcspace(hid_t dcpl_id, size_t index); -H5_DLL ssize_t H5Pget_virtual_filename(hid_t dcpl_id, size_t index, char *name /*out*/, size_t size); -H5_DLL ssize_t H5Pget_virtual_dsetname(hid_t dcpl_id, size_t index, char *name /*out*/, size_t size); -H5_DLL herr_t H5Pset_external(hid_t plist_id, const char *name, off_t offset, hsize_t size); -H5_DLL herr_t H5Pset_chunk_opts(hid_t plist_id, unsigned opts); -H5_DLL herr_t H5Pget_chunk_opts(hid_t plist_id, unsigned *opts); -H5_DLL int H5Pget_external_count(hid_t plist_id); -H5_DLL herr_t H5Pget_external(hid_t plist_id, unsigned idx, size_t name_size, char *name /*out*/, - off_t *offset /*out*/, hsize_t *size /*out*/); -H5_DLL herr_t H5Pset_szip(hid_t plist_id, unsigned options_mask, unsigned pixels_per_block); -H5_DLL herr_t H5Pset_shuffle(hid_t plist_id); -H5_DLL herr_t H5Pset_nbit(hid_t plist_id); -H5_DLL herr_t H5Pset_scaleoffset(hid_t plist_id, H5Z_SO_scale_type_t scale_type, int scale_factor); -H5_DLL herr_t H5Pset_fill_value(hid_t plist_id, hid_t type_id, const void *value); -H5_DLL herr_t H5Pget_fill_value(hid_t plist_id, hid_t type_id, void *value /*out*/); -H5_DLL herr_t H5Pfill_value_defined(hid_t plist, H5D_fill_value_t *status); -H5_DLL herr_t H5Pset_alloc_time(hid_t plist_id, H5D_alloc_time_t alloc_time); -H5_DLL herr_t H5Pget_alloc_time(hid_t plist_id, H5D_alloc_time_t *alloc_time /*out*/); -H5_DLL herr_t H5Pset_fill_time(hid_t plist_id, H5D_fill_time_t fill_time); -H5_DLL herr_t H5Pget_fill_time(hid_t plist_id, H5D_fill_time_t *fill_time /*out*/); -H5_DLL herr_t H5Pget_dset_no_attrs_hint(hid_t dcpl_id, hbool_t *minimize); -H5_DLL herr_t H5Pset_dset_no_attrs_hint(hid_t dcpl_id, hbool_t minimize); +/** + * \ingroup DCPL + * + * \brief Gets the number of mappings for the virtual dataset + * + * \dcpl_id + * \param[out] count The number of mappings + * + * \return \herr_t + * + * \details H5Pget_virtual_count() gets the number of mappings for a + * virtual dataset that has the creation property list specified + * by \p dcpl_id. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pget_virtual_count(hid_t dcpl_id, size_t *count /*out*/); +/** + * \ingroup DCPL + * + * \brief Gets the name of a source dataset used in the mapping + * + * \dcpl_id + * \param[in] index Mapping index. The value of \p index is 0 (zero) or + * greater and less than \p count + * (0 ≤ \p index < \p count), where \p count is the + * number of mappings returned by H5Pget_virtual_count(). + * \param[out] name A buffer containing the name of the source dataset + * \param[in] size The size, in bytes, of the name buffer. Must be the + * size of the dataset name in bytes plus 1 for a NULL + * terminator + * + * \return Returns the length of the dataset name if successful; + * otherwise returns a negative value. + * + * \details H5Pget_virtual_dsetname() takes the dataset creation property + * list for the virtual dataset, \p dcpl_id, the mapping index, + * \p index, the size of the dataset name for a source dataset, + * \p size, and retrieves the name of the source dataset used in + * the mapping. + * + * Up to \p size characters of the dataset name are returned in + * \p name; additional characters, if any, are not returned to + * the user application. + * + * If the length of the dataset name, which determines the + * required value of \p size, is unknown, a preliminary call + * to H5Pget_virtual_dsetname() with the last two parameters + * set to NULL and zero respectively can be made. The return + * value of this call will be the size in bytes of the dataset + * name. That value, plus 1 for a NULL terminator, must then be + * assigned to \p size for a second H5Pget_virtual_dsetname() + * call, which will retrieve the actual dataset name. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL ssize_t H5Pget_virtual_dsetname(hid_t dcpl_id, size_t index, char *name /*out*/, size_t size); +/** + * \ingroup DCPL + * + * \brief Gets the filename of a source dataset used in the mapping + * + * \dcpl_id + * \param[in] index Mapping index. The value of \p index is 0 (zero) or + * greater and less than \p count + * (0 ≤ \p index < \p count), where \p count is the + * number of mappings returned by H5Pget_virtual_count(). + * \param[out] name A buffer containing the name of the file containing + * the source dataset + * \param[in] size The size, in bytes, of the name buffer. Must be the + * size of the filename in bytes plus 1 for a NULL + * terminator + * + * \return Returns the length of the filename if successful; otherwise + * returns a negative value. + * + * \details H5Pget_virtual_filename() takes the dataset creation property + * list for the virtual dataset, \p dcpl_id, the mapping index, + * \p index, the size of the filename for a source dataset, + * \p size, and retrieves the name of the file for a source dataset + * used in the mapping. + * + * Up to \p size characters of the filename are returned in + * \p name; additional characters, if any, are not returned to + * the user application. + * + * If the length of the filename, which determines the required + * value of \p size, is unknown, a preliminary call to + * H5Pget_virtual_filename() with the last two parameters set + * to NULL and zero respectively can be made. The return value + * of this call will be the size in bytes of the filename. That + * value, plus 1 for a NULL terminator, must then be assigned to + * \p size for a second H5Pget_virtual_filename() call, which + * will retrieve the actual filename. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL ssize_t H5Pget_virtual_filename(hid_t dcpl_id, size_t index, char *name /*out*/, size_t size); +/** + * \ingroup DCPL + * + * \brief Gets a dataspace identifier for the selection within the source + * dataset used in the mapping + * + * \dcpl_id + * \param[in] index Mapping index. The value of \p index is 0 (zero) or + * greater and less than \p count + * (0 ≤ \p index < \p count), where \p count is the number + * of mappings returned by H5Pget_virtual_count(). + * + * \return \hid_t{valid dataspace identifier} + * + * \details H5Pget_virtual_srcspace() takes the dataset creation property + * list for the virtual dataset, \p dcpl_id, and the mapping + * index, \p index, and returns a dataspace identifier for the + * selection within the source dataset used in the mapping. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL hid_t H5Pget_virtual_srcspace(hid_t dcpl_id, size_t index); +/** + * \ingroup DCPL + * + * \brief Gets a dataspace identifier for the selection within the virtual + * dataset used in the mapping + * + * \dcpl_id + * \param[in] index Mapping index. The value of \p index is 0 (zero) or + * greater and less than \p count + * (0 ≤ \p index < \p count), where \p count is the number + * of mappings returned by H5Pget_virtual_count() + * + * \return \hid_t{valid dataspace identifier} + * + * \details H5Pget_virtual_vspace() takes the dataset creation property + * list for the virtual dataset, \p dcpl_id, and the mapping + * index, \p index, and returns a dataspace identifier for the + * selection within the virtual dataset used in the mapping. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL hid_t H5Pget_virtual_vspace(hid_t dcpl_id, size_t index); +/** + * \ingroup DCPL + * + * \brief Sets the timing for storage space allocation + * + * \dcpl_id{plist_id} + * \param[in] alloc_time When to allocate dataset storage space + * + * \return \herr_t + * + * \details H5Pset_alloc_time() sets up the timing for the allocation of + * storage space for a dataset's raw data. This property is set + * in the dataset creation property list \p plist_id. Timing is + * specified in \p alloc_time with one of the following values: + * + * <table> + * <tr> + * <td>#H5D_ALLOC_TIME_DEFAULT</td> + * <td>Allocate dataset storage space at the default time<br /> + * (Defaults differ by storage method.)</td> + * </tr> + * <tr> + * <td>#H5D_ALLOC_TIME_EARLY</td> + * <td>Allocate all space when the dataset is created<br /> + * (Default for compact datasets.)</td> + * </tr> + * <tr> + * <td>#H5D_ALLOC_TIME_INCR</td> + * <td>Allocate space incrementally, as data is written to + * the dataset<br />(Default for chunked storage datasets.) + * + * \li Chunked datasets: Storage space allocation for each + * chunk is deferred until data is written to the chunk. + * \li Contiguous datasets: Incremental storage space + * allocation for contiguous data is treated as late + * allocation. + * \li Compact datasets: Incremental allocation is not + * allowed with compact datasets; H5Pset_alloc_time() + * will return an error.</td> + * </tr> + * <tr> + * <td>#H5D_ALLOC_TIME_LATE</td> + * <td>Allocate all space when data is first written to the + * dataset<br /> + * (Default for contiguous datasets.)</td> + * </tr> + * </table> + * + * \note H5Pset_alloc_time() is designed to work in concert with the + * dataset fill value and fill value write time properties, set + * with the functions H5Pset_fill_value() and H5Pset_fill_time(). + * + * \note See H5Dcreate() for further cross-references. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_alloc_time(hid_t plist_id, H5D_alloc_time_t alloc_time); +/** + * \ingroup DCPL + * + * \brief Sets the size of the chunks used to store a chunked layout + * dataset + * + * \dcpl_id{plist_id} + * \param[in] ndims The number of dimensions of each chunk + * \param[in] dim An array defining the size, in dataset elements, of + * each chunk + * + * \return \herr_t + * \details H5Pset_chunk() sets the size of the chunks used to store a + * chunked layout dataset. This function is only valid for dataset + * creation property lists. + * + * The \p ndims parameter currently must be the same size as the + * rank of the dataset. + * + * The values of the \p dim array define the size of the chunks + * to store the dataset's raw data. The unit of measure for \p dim + * values is dataset elements. + * + * As a side-effect of this function, the layout of the dataset is + * changed to #H5D_CHUNKED, if it is not already so set. + * + * \note Chunk size cannot exceed the size of a fixed-size dataset. For + * example, a dataset consisting of a 5x4 fixed-size array cannot be + * defined with 10x10 chunks. Chunk maximums: + * - The maximum number of elements in a chunk is 2<sup>32</sup>-1 which + * is equal to 4,294,967,295. If the number of elements in a chunk is + * set via H5Pset_chunk() to a value greater than 2<sup>32</sup>-1, + * then H5Pset_chunk() will fail. + * - The maximum size for any chunk is 4GB. If a chunk that is larger + * than 4GB attempts to be written with H5Dwrite(), then H5Dwrite() + * will fail. + * + * \see H5Pset_layout(), H5Dwrite() + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_chunk(hid_t plist_id, int ndims, const hsize_t dim[/*ndims*/]); +/** + * \ingroup DCPL + * + * \brief Sets the edge chunk option in a dataset creation property list + * + * \dcpl_id{plist_id} + * \param[in] opts Edge chunk option flag. Valid values are: + * \li #H5D_CHUNK_DONT_FILTER_PARTIAL_CHUNKS + * When enabled, filters are not applied to partial + * edge chunks. When disabled, partial edge chunks are + * filtered. Enabling this option will improve + * performance when appending to the dataset and, when + * compression filters are used, prevent reallocation + * of these chunks. Datasets created with this option + * enabled will be inaccessible with HDF5 library + * versions before Release 1.10. Default: \e Disabled + * \li 0 (zero) Disables option; partial edge chunks + * will be compressed. + * + * \return \herr_t + * + * \details H5Pset_chunk_opts() sets the edge chunk option in the + * dataset creation property list \p dcpl_id. + * + * The available option is detailed in the parameters section. + * Only chunks that are not completely filled by the dataset’s + * dataspace are affected by this option. Such chunks are + * referred to as partial edge chunks. + * + * \b Motivation: H5Pset_chunk_opts() is used to specify storage + * options for chunks on the edge of a dataset’s dataspace. This + * capability allows the user to tune performance in cases where + * the dataset size may not be a multiple of the chunk size and + * the handling of partial edge chunks can impact performance. + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pset_chunk_opts(hid_t plist_id, unsigned opts); +/** + * \ingroup DCPL + * + * \brief Sets the flag to create minimized dataset object headers + * + * \dcpl_id + * \param[in] minimize Flag for indicating whether or not a dataset's + * object header will be minimized + * + * \return \herr_t + * + * \details H5Pset_dset_no_attrs_hint() sets the no dataset attributes + * hint setting for the dataset creation property list \p dcpl_id. + * Datasets created with the dataset creation property list + * \p dcpl_id will have their object headers minimized if the + * boolean flag \p minimize is set to TRUE. By setting \p minimize + * to TRUE, the library expects that no attributes will be added + * to the dataset. Attributes can be added, but they are appended + * with a continuation message, which can reduce performance. + * + * This setting interacts with H5Fset_dset_no_attrs_hint(): if + * either is set to TRUE, then the created dataset's object header + * will be minimized. + * + * \since 1.10.5 + * + */ +H5_DLL herr_t H5Pset_dset_no_attrs_hint(hid_t dcpl_id, hbool_t minimize); +/** + * \ingroup DCPL + * + * \brief Adds an external file to the list of external files + * + * \dcpl_id{plist_id} + * \param[in] name Name of an external file + * \param[in] offset Offset, in bytes, from the beginning of the file to + * the location in the file where the data starts + * \param[in] size Number of bytes reserved in the file for the data + * + * \return \herr_t + * + * \details The first call to H5Pset_external() sets the external + * storage property in the property list, thus designating that + * the dataset will be stored in one or more non-HDF5 file(s) + * external to the HDF5 file. This call also adds the file + * \p name as the first file in the list of external files. + * Subsequent calls to the function add the named file as the + * next file in the list. + * + * If a dataset is split across multiple files, then the files + * should be defined in order. The total size of the dataset is + * the sum of the \p size arguments for all the external files. + * If the total size is larger than the size of a dataset then + * the dataset can be extended (provided the data space also + * allows the extending). + * + * The \p size argument specifies the number of bytes reserved + * for data in the external file. If \p size is set to + * #H5F_UNLIMITED, the external file can be of unlimited size + * and no more files can be added to the external files list. + * If \p size is set to 0 (zero), no external file will actually + * be created. + * + * All of the external files for a given dataset must be specified + * with H5Pset_external() before H5Dcreate() is called to create + * the dataset. If one these files does not exist on the system + * when H5Dwrite() is called to write data to it, the library + * will create the file. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_external(hid_t plist_id, const char *name, off_t offset, hsize_t size); +/** + * \ingroup DCPL + * + * \brief Sets the time when fill values are written to a dataset + * + * \dcpl_id{plist_id} + * \param[in] fill_time When to write fill values to a dataset + * + * \return \herr_t + * + * \details H5Pset_fill_time() sets up the timing for writing fill values + * to a dataset. This property is set in the dataset creation + * property list \p plist_id. Timing is specified in \p fill_time + * with one of the following values: + * + * <table> + * <tr> + * <td>#H5D_FILL_TIME_IFSET</td> + * <td>Write fill values to the dataset when storage space is + * allocated only if there is a user-defined fill value, + * i.e.,one set with H5Pset_fill_value(). (Default)</td> + * </tr> + * <tr> + * <td>#H5D_FILL_TIME_ALLOC</td> + * <td>Write fill values to the dataset when storage space is + * allocated.</td> + * </tr> + * <tr> + * <td>#H5D_FILL_TIME_NEVER</td> + * <td>Never write fill values to the dataset.</td> + * </tr> + * </table> + * + * \note H5Pset_fill_time() is designed for coordination with the dataset + * fill value and dataset storage allocation time properties, set + * with the functions H5Pset_fill_value() and H5Pset_alloc_time(). + * See H5Dcreate() for further cross-references. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_fill_time(hid_t plist_id, H5D_fill_time_t fill_time); +/** + * \ingroup DCPL + * + * \brief Sets the fill value for a dataset + * + * \dcpl_id{plist_id} + * \param[in] type_id Datatype of \p value + * \param[in] value Pointer to buffer containing value to use as + * fill value + * + * \return \herr_t + * + * \details H5Pset_fill_value() sets the fill value for a dataset in the + * dataset creation property list. \p value is interpreted as + * being of datatype \p type_id. This datatype may differ from + * that of the dataset, but the HDF5 library must be able to + * convert \p value to the dataset datatype when the dataset is + * created. + * + * The default fill value is 0 (zero), which is interpreted + * according to the actual dataset datatype. + * + * Setting \p value to NULL indicates that the fill value is to + * be undefined. + * + * \note Applications sometimes write data only to portions of an allocated + * dataset. It is often useful in such cases to fill the unused space + * with a known fill value. This function allows the user application + * to set that fill value; the functions H5Dfill() and + * H5Pset_fill_time(), respectively, provide the ability to apply the + * fill value on demand or to set up its automatic application. + * + * \note A fill value should be defined so that it is appropriate for the + * application. While the HDF5 default fill value is 0 (zero), it is + * often appropriate to use another value. It might be useful, for + * example, to use a value that is known to be impossible for the + * application to legitimately generate. + * + * \note H5Pset_fill_value() is designed to work in concert with + * H5Pset_alloc_time() and H5Pset_fill_time(). H5Pset_alloc_time() + * and H5Pset_fill_time() govern the timing of dataset storage + * allocation and fill value write operations and can be important in + * tuning application performance. + * + * \note See H5Dcreate() for further cross-references. + * + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_fill_value(hid_t plist_id, hid_t type_id, const void *value); +/** + * \ingroup DCPL + * + * \brief Sets up use of the shuffle filter + * + * \dcpl_id{plist_id} + * + * \return \herr_t + * + * \details H5Pset_shuffle() sets the shuffle filter, #H5Z_FILTER_SHUFFLE, + * in the dataset creation property list \p plist_id. The shuffle + * filter de-interlaces a block of data by reordering the bytes. + * All the bytes from one consistent byte position of each data + * element are placed together in one block; all bytes from a + * second consistent byte position of each data element are placed + * together a second block; etc. For example, given three data + * elements of a 4-byte datatype stored as 012301230123, shuffling + * will re-order data as 000111222333. This can be a valuable step + * in an effective compression algorithm because the bytes in each + * byte position are often closely related to each other and + * putting them together can increase the compression ratio. + * + * As implied above, the primary value of the shuffle filter lies + * in its coordinated use with a compression filter; it does not + * provide data compression when used alone. When the shuffle + * filter is applied to a dataset immediately prior to the use of + * a compression filter, the compression ratio achieved is often + * superior to that achieved by the use of a compression filter + * without the shuffle filter. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_shuffle(hid_t plist_id); +/** + * \ingroup DCPL + * + * \brief Sets the type of storage used to store the raw data for a dataset + * + * \dcpl_id{plist_id} + * \param[in] layout Type of storage layout for raw data + * + * \return \herr_t + * \details H5Pset_layout() sets the type of storage used to store the raw + * data for a dataset. This function is only valid for dataset + * creation property lists. + * + * Valid values for \p layout are: + * - #H5D_COMPACT: Store raw data in the dataset object header + * in file. This should only be used for datasets + * with small amounts of raw data. The raw data + * size limit is 64K (65520 bytes). Attempting + * to create a dataset with raw data larger than + * this limit will cause the H5Dcreate() call to + * fail. + * - #H5D_CONTIGUOUS: Store raw data separately from the object + * header in one large chunk in the file. + * - #H5D_CHUNKED: Store raw data separately from the object header + * as chunks of data in separate locations in + * the file. + * - #H5D_VIRTUAL: Draw raw data from multiple datasets in + * different files. + * + * Note that a compact storage layout may affect writing data to + * the dataset with parallel applications. See the note in + * H5Dwrite() documentation for details. + * \version 1.10.0 #H5D_VIRTUAL added in this release. + * \since 1.0.0 + * + */ +H5_DLL herr_t H5Pset_layout(hid_t plist_id, H5D_layout_t layout); +/** + * \ingroup DCPL + * + * \brief Sets up the use of the N-Bit filter + * + * \dcpl_id{plist_id} + * + * \return \herr_t + * + * \details H5Pset_nbit() sets the N-Bit filter, #H5Z_FILTER_NBIT, in the + * dataset creation property list \p plist_id. + * + * The HDF5 user can create an N-Bit datatype with the following + * code: + * <pre> + * hid_t nbit_datatype = H5Tcopy(H5T_STD_I32LE); + * H5Tset_precision(nbit_datatype, 16); + * H5Tset_offset(nbit_datatype, 4); + * </pre> + * + * In memory, one value of the N-Bit datatype in the above example + * will be stored on a little-endian machine as follows: + * + * <table> + * <tr> + * <td>byte 3</td> + * <td>byte 2</td> + * <td>byte 1</td> + * <td>byte 0</td> + * </tr> + * <tr> + * <td>????????</td> + * <td>????SPPP</td> + * <td>PPPPPPPP</td> + * <td>PPPP????</td> + * </tr> + * </table> + * Note: S - sign bit, P - significant bit, ? - padding bit; For + * signed integer, the sign bit is included in the precision. + * + * When data of the above datatype is stored on disk using the + * N-bit filter, all padding bits are chopped off and only + * significant bits are stored. The values on disk will be + * something like: + * + * <table> + * <tr> + * <td>1st value</td> + * <td>2nd value</td> + * <td>...</td> + * </tr> + * <tr> + * <td>SPPPPPPPPPPPPPPP</td> + * <td>SPPPPPPPPPPPPPPP</td> + * <td>...</td> + * </tr> + * </table> + * The N-Bit filter is used effectively for compressing data of + * an N-Bit datatype as well as a compound and an array + * datatype with N-Bit fields. However, the datatype classes of + * the N-Bit datatype or the N-Bit field of the compound + * datatype or the array datatype are limited to integer or + * floating-point. + * + * The N-Bit filter supports complex situations where a compound + * datatype contains member(s) of a compound datatype or an array + * datatype that has a compound datatype as the base type. + * However, it does not support the situation where an array + * datatype has a variable-length or variable-length string as + * its base datatype. The filter does support the situation where + * a variable-length or variable-length string is a member of a + * compound datatype. + * + * The N-Bit filter allows all other HDF5 datatypes (such as + * time, string, bitfield, opaque, reference, enum, and variable + * length) to pass through as a no-op. + * + * Like other I/O filters supported by the HDF5 library, + * application using the N-Bit filter must store data with + * chunked storage. + * + * By nature, the N-Bit filter should not be used together with + * other I/O filters. + * + * \version 1.8.8 Fortran subroutine introduced in this release. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_nbit(hid_t plist_id); +/** + * \ingroup DCPL + * + * \brief Sets up the use of the scale-offset filter + * + * \dcpl_id{plist_id} + * \param[in] scale_type Flag indicating compression method + * \param[in] scale_factor Parameter related to scale. Must be + * non-negative + * + * \return \herr_t + * + * \details H5Pset_scaleoffset() sets the scale-offset filter, + * #H5Z_FILTER_SCALEOFFSET, for a dataset. + * + * Generally speaking, scale-offset compression performs a scale and/or + * offset operation on each data value and truncates the resulting + * value to a minimum number of bits (MinBits) before storing it. The + * current scale-offset filter supports integer and floating-point + * datatypes. + * + * For an integer datatype, the parameter \p scale_type should be set + * to #H5Z_SO_INT (2). The parameter \p scale_factor denotes MinBits. + * If the user sets it to H5Z_SO_INT_MINBITS_DEFAULT (0), the filter + * will calculate MinBits. If \p scale_factor is set to a positive + * integer, the filter does not do any calculation and just uses the + * number as MinBits. However, if the user gives a MinBits that is less + * than what would be generated by the filter, the compression will be + * lossy. Also, the MinBits supplied by the user cannot exceed the + * number of bits to store one value of the dataset datatype. + * + * For a floating-point datatype, the filter adopts the GRiB data + * packing mechanism, which offers two alternate methods: E-scaling and + * D-scaling. Both methods are lossy compression. If the parameter + * \p scale_type is set to #H5Z_SO_FLOAT_DSCALE (0), the filter will + * use the D-scaling method; if it is set to #H5Z_SO_FLOAT_ESCALE (1), + * the filter will use the E-scaling method. Since only the D-scaling + * method is implemented, \p scale_type should be set to + * #H5Z_SO_FLOAT_DSCALE or 0. + * + * When the D-scaling method is used, the original data is "D" scaled + * — multiplied by 10 to the power of \p scale_factor, and the + * "significant" part of the value is moved to the left of the decimal + * point. Care should be taken in setting the decimal \p scale_factor + * so that the integer part will have enough precision to contain the + * appropriate information of the data value. For example, if + * \p scale_factor is set to 2, the number 104.561 will be 10456.1 + * after "D" scaling. The last digit 1 is not "significant" and is + * thrown off in the process of rounding. The user should make sure that + * after "D" scaling and rounding, the data values are within the range + * that can be represented by the integer (same size as the + * floating-point type). + * + * Valid values for scale_type are as follows: + * + * <table> + * <tr> + * <td>#H5Z_SO_FLOAT_DSCALE (0)</td> + * <td>Floating-point type, using variable MinBits method</td> + * </tr> + * <tr> + * <td>#H5Z_SO_FLOAT_ESCALE (1)</td> + * <td>Floating-point type, using fixed MinBits method</td> + * </tr> + * <tr> + * <td>#H5Z_SO_INT (2)</td> + * <td>Integer type</td> + * </tr> + * </table> + * + * The meaning of \p scale_factor varies according to the value + * assigned to \p scale_type: + * + * <table> + * <tr> + * <th>\p scale_type value</th> + * <th>\p scale_factor description</th> + * </tr> + * <tr> + * <td>#H5Z_SO_FLOAT_DSCALE</td> + * <td>Denotes the decimal scale factor for D-scaling and can be + * positive, negative or zero. This is the current + * implementation of the library.</td> + * </tr> + * <tr> + * <td>#H5Z_SO_FLOAT_ESCALE</td> + * <td>Denotes MinBits for E-scaling and must be a positive integer. + * This is not currently implemented by the library.</td> + * </tr> + * <tr> + * <td>#H5Z_SO_INT</td> + * <td>Denotes MinBits and it should be a positive integer or + * #H5Z_SO_INT_MINBITS_DEFAULT (0). If it is less than 0, the + * library will reset it to 0 since it is not implemented. + * </td> + * </tr> + * </table> + * Like other I/O filters supported by the HDF5 library, an + * application using the scale-offset filter must store data with + * chunked storage. + * + * \version 1.8.8 Fortran90 subroutine introduced in this release. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_scaleoffset(hid_t plist_id, H5Z_SO_scale_type_t scale_type, int scale_factor); +/** + * \ingroup DCPL + * + * \brief Sets up use of the SZIP compression filter + * + * \dcpl_id{plist_id} + * \param[in] options_mask A bit-mask conveying the desired SZIP options; + * Valid values are #H5_SZIP_EC_OPTION_MASK and + * #H5_SZIP_NN_OPTION_MASK. + * \param[in] pixels_per_block The number of pixels or data elements in each + * data block + * + * \return \herr_t + * + * \details H5Pset_szip() sets an SZIP compression filter, #H5Z_FILTER_SZIP, + * for a dataset. SZIP is a compression method designed for use with + * scientific data. + * + * Before proceeding, all users should review the “Limitations” + * section below. + * + * Users familiar with SZIP outside the HDF5 context may benefit + * from reviewing the Note “For Users Familiar with SZIP in Other + * Contexts” below. + * + * In the text below, the term pixel refers to an HDF5 data element. + * This terminology derives from SZIP compression's use with image + * data, where pixel referred to an image pixel. + * + * The SZIP \p bits_per_pixel value (see Note, below) is automatically + * set, based on the HDF5 datatype. SZIP can be used with atomic + * datatypes that may have size of 8, 16, 32, or 64 bits. + * Specifically, a dataset with a datatype that is 8-, 16-, 32-, or + * 64-bit signed or unsigned integer; char; or 32- or 64-bit float + * can be compressed with SZIP. See Note, below, for further + * discussion of the the SZIP \p bits_per_pixel setting. + * + * SZIP options are passed in an options mask, \p options_mask, + * as follows. + * + * <table> + * <tr> + * <th>Option</th> + * <th>Description (Mutually exclusive; select one.)</th> + * </tr> + * <tr> + * <td>#H5_SZIP_EC_OPTION_MASK</td> + * <td>Selects entropy coding method</td> + * </tr> + * <tr> + * <td>#H5_SZIP_NN_OPTION_MASK</td> + * <td>Selects nearest neighbor coding method</td> + * </tr> + * </table> + * + * The following guidelines can be used in determining which + * option to select: + * + * - The entropy coding method, the EC option specified by + * #H5_SZIP_EC_OPTION_MASK, is best suited for data that has been + * processed. The EC method works best for small numbers. + * - The nearest neighbor coding method, the NN option specified + * by #H5_SZIP_NN_OPTION_MASK, preprocesses the data then the + * applies EC method as above. + * + * Other factors may affect results, but the above criteria + * provides a good starting point for optimizing data compression. + * + * SZIP compresses data block by block, with a user-tunable block + * size. This block size is passed in the parameter + * \p pixels_per_block and must be even and not greater than 32, + * with typical values being 8, 10, 16, or 32. This parameter + * affects compression ratio; the more pixel values vary, the + * smaller this number should be to achieve better performance. + * + * In HDF5, compression can be applied only to chunked datasets. + * If \p pixels_per_block is bigger than the total number of + * elements in a dataset chunk, H5Pset_szip() will succeed but + * the subsequent call to H5Dcreate() will fail; the conflict + * can be detected only when the property list is used. + * + * To achieve optimal performance for SZIP compression, it is + * recommended that a chunk's fastest-changing dimension be equal + * to N times \p pixels_per_block where N is the maximum number of + * blocks per scan line allowed by the SZIP library. In the + * current version of SZIP, N is set to 128. + * + * SZIP compression is an optional HDF5 filter. + * + * \b Limitations: + * + * - SZIP compression cannot be applied to compound, array, + * variable-length, enumeration, or any other user-defined + * datatypes. If an SZIP filter is set in a dataset creation + * property list used to create a dataset containing a + * non-allowed datatype, the call to H5Dcreate() will fail; the + * conflict can be detected only when the property list is used. + * - Users should be aware that there are factors that affect one’s + * rights and ability to use SZIP compression by reviewing the + * SZIP copyright notice. + * + * \note \b For \b Users \b Familiar \b with \b SZIP \b in \b Other \b Contexts: + * + * \note The following notes are of interest primarily to those who have + * used SZIP compression outside of the HDF5 context. + * In non-HDF5 applications, SZIP typically requires that the user + * application supply additional parameters: + * - \p pixels_in_object, the number of pixels in the object to + * be compressed + * - \p bits_per_pixel, the number of bits per pixel + * - \p pixels_per_scanline, the number of pixels per scan line + * + * \note These values need not be independently supplied in the HDF5 + * environment as they are derived from the datatype and dataspace, + * which are already known. In particular, HDF5 sets + * \p pixels_in_object to the number of elements in a chunk and + * \p bits_per_pixel to the size of the element or pixel datatype. + * + * \note The following algorithm is used to set \p pixels_per_scanline: + * - If the size of a chunk's fastest-changing dimension, size, + * is greater than 4K, set \p pixels_per_scanline to 128 times + * \p pixels_per_block. + * - If size is less than 4K but greater than \p pixels_per_block, + * set \p pixels_per_scanline to the minimum of size and 128 + * times \p pixels_per_block. + * - If size is less than \p pixels_per_block but greater than the + * number elements in the chunk, set \p pixels_per_scanline to + * the minimum of the number elements in the chunk and 128 times + * \p pixels_per_block. + * + * \note The HDF5 datatype may have precision that is less than the full + * size of the data element, e.g., an 11-bit integer can be defined + * using H5Tset_precision(). To a certain extent, SZIP can take + * advantage of the precision of the datatype to improve compression: + * - If the HDF5 datatype size is 24-bit or less and the offset of + * the bits in the HDF5 datatype is zero (see H5Tset_offset() or + * H5Tget_offset()), the data is the in lowest N bits of the data + * element. In this case, the SZIP \p bits_per_pixel is set to the + * precision of the HDF5 datatype. + * - If the offset is not zero, the SZIP \p bits_per_pixel will be + * set to the number of bits in the full size of the data element. + * - If the HDF5 datatype precision is 25-bit to 32-bit, the SZIP + * \p bits_per_pixel will be set to 32. + * - If the HDF5 datatype precision is 33-bit to 64-bit, the SZIP + * \p bits_per_pixel will be set to 64. + * + * \note HDF5 always modifies the options mask provided by the user to set up + * usage of RAW_OPTION_MASK, ALLOW_K13_OPTION_MASK, and one of + * LSB_OPTION_MASK or MSB_OPTION_MASK, depending on endianness of the + * datatype. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_szip(hid_t plist_id, unsigned options_mask, unsigned pixels_per_block); + +/** + * \ingroup DCPL + * + * \brief Sets the mapping between virtual and source datasets + * + * \dcpl_id + * \param[in] vspace_id The dataspace identifier with the selection within the + * virtual dataset applied, possibly an unlimited selection + * \param[in] src_file_name The name of the HDF5 file where the source dataset is + * located or a \Code{"."} (period) for a source dataset in the same + * file. The file might not exist yet. The name can be specified using + * a C-style \c printf statement as described below. + * \param[in] src_dset_name The path to the HDF5 dataset in the file specified by + * \p src_file_name. The dataset might not exist yet. The dataset name + * can be specified using a C-style \c printf statement as described below. + * \param[in] src_space_id The source dataset’s dataspace identifier with a + * selection applied, possibly an unlimited selection + * \return \herr_t + * + * \details H5Pset_virtual() maps elements of the virtual dataset (VDS) + * described by the virtual dataspace identifier \p vspace_id to the + * elements of the source dataset described by the source dataset + * dataspace identifier \p src_space_id. The source dataset is + * identified by the name of the file where it is located, + * \p src_file_name, and the name of the dataset, \p src_dset_name. + * + * \par C-style \c printf Formatting Statements: + * C-style \c printf formatting allows a pattern to be specified in the name + * of a source file or dataset. Strings for the file and dataset names are + * treated as literals except for the following substitutions: + * <table> + * <tr> + * <td>\Code{"%%"}</td> + * <td>Replaced with a single \Code{"%"} (percent) character.</td> + * </tr> + * <tr> + * <td><code>"%<d>b"</code></td> + * <td>Where <code>"<d>"</code> is the virtual dataset dimension axis (0-based) + * and \Code{"b"} indicates that the block count of the selection in that + * dimension should be used. The full expression (for example, \Code{"%0b"}) + * is replaced with a single numeric value when the mapping is evaluated at + * VDS access time. Example code for many source and virtual dataset mappings + * is available in the "Examples of Source to Virtual Dataset Mapping" + * chapter in the + * <a href="https://portal.hdfgroup.org/display/HDF5/RFC+HDF5+Virtual+Dataset"> + * RFC: HDF5 Virtual Dataset</a>. + * </td> + * </tr> + * </table> + * If the printf form is used for the source file or dataset names, the + * selection in the source dataset’s dataspace must be fixed-size. + * + * \par Source File Resolutions: + * When a source dataset residing in a different file is accessed, the + * library will search for the source file \p src_file_name as described + * below: + * \li If \p src_file_name is a \Code{"."} (period) then it refers to the + * file containing the virtual dataset. + * \li If \p src_file_name is a relative pathname, the following steps are + * performed: + * - The library will get the prefix(es) set in the environment + * variable \c HDF5_VDS_PREFIX and will try to prepend each prefix + * to \p src_file_name to form a new \p src_file_name. If the new + * \p src_file_name does not exist or if \c HDF5_VDS_PREFIX is not + * set, the library will get the prefix set via H5Pset_virtual_prefix() + * and prepend it to \p src_file_name to form a new \p src_file_name. + * If the new \p src_file_name does not exist or no prefix is being + * set by H5Pset_virtual_prefix() then the path of the file containing + * the virtual dataset is obtained. This path can be the absolute path + * or the current working directory plus the relative path of that + * file when it is created/opened. The library will prepend this path + * to \p src_file_name to form a new \p src_file_name. + * - If the new \p src_file_name does not exist, then the library will + * look for \p src_file_name and will return failure/success accordingly. + * \li If \p src_file_name is an absolute pathname, the library will first + * try to find \p src_file_name. If \p src_file_name does not exist, + * \p src_file_name is stripped of directory paths to form a new + * \p src_file_name. The search for the new \p src_file_name then follows + * the same steps as described above for a relative pathname. See + * examples below illustrating how \p src_file_name is stripped to form + * a new \p src_file_name. + * \par + * Note that \p src_file_name is considered to be an absolute pathname when + * the following condition is true: + * \li For Unix, the first character of \p src_file_name is a slash + * (\Code{/}).\n For example, consider a \p src_file_name of + * \Code{/tmp/A.h5}. If that source file does not exist, the new + * \p src_file_name after stripping will be \Code{A.h5}. + * \li For Windows, there are 6 cases: + * 1. \p src_file_name is an absolute drive with absolute pathname.\n + * For example, consider a \p src_file_name of \Code{/tmp/A.h5}. + * If that source file does not exist, the new \p src_file_name + * after stripping will be \Code{A.h5}. + * 2. \p src_file_name is an absolute pathname without specifying + * drive name.\n For example, consider a \p src_file_name of + * \Code{/tmp/A.h5}. If that source file does not exist, the new + * \p src_file_name after stripping will be \Code{A.h5}. + * 3. \p src_file_name is an absolute drive with relative pathname.\n + * For example, consider a \p src_file_name of \Code{/tmp/A.h5}. + * If that source file does not exist, the new \p src_file_name + * after stripping will be \Code{tmp/A.h5}. + * 4. \p src_file_name is in UNC (Uniform Naming Convention) format + * with server name, share name, and pathname.\n + * For example, consider a \p src_file_name of \Code{/tmp/A.h5}. + * If that source file does not exist, the new \p src_file_name + * after stripping will be \Code{A.h5}. + * 5. \p src_file_name is in Long UNC (Uniform Naming Convention) + * format with server name, share name, and pathname.\n + * For example, consider a \p src_file_name of \Code{/tmp/A.h5}. + * If that source file does not exist, the new \p src_file_name + * after stripping will be \Code{A.h5}. + * 6. \p src_file_name is in Long UNC (Uniform Naming Convention) + * format with an absolute drive and an absolute pathname.\n + * For example, consider a \p src_file_name of \Code{/tmp/A.h5}. + * If that source file does not exist, the new \p src_file_name + * after stripping will be \Code{A.h5} + * + * \see <a href="https://portal.hdfgroup.org/display/HDF5/Virtual+Dataset++-+VDS"> + * Virtual Dataset Overview</a> + * + * \see_virtual + * + * \version 1.10.2 A change was made to the method of searching for VDS source files. + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pset_virtual(hid_t dcpl_id, hid_t vspace_id, const char *src_file_name, + const char *src_dset_name, hid_t src_space_id); /* Dataset access property list (DAPL) routines */ -H5_DLL herr_t H5Pset_chunk_cache(hid_t dapl_id, size_t rdcc_nslots, size_t rdcc_nbytes, double rdcc_w0); -H5_DLL herr_t H5Pget_chunk_cache(hid_t dapl_id, size_t *rdcc_nslots /*out*/, size_t *rdcc_nbytes /*out*/, - double *rdcc_w0 /*out*/); -H5_DLL herr_t H5Pset_virtual_view(hid_t plist_id, H5D_vds_view_t view); -H5_DLL herr_t H5Pget_virtual_view(hid_t plist_id, H5D_vds_view_t *view); -H5_DLL herr_t H5Pset_virtual_printf_gap(hid_t plist_id, hsize_t gap_size); -H5_DLL herr_t H5Pget_virtual_printf_gap(hid_t plist_id, hsize_t *gap_size); -H5_DLL herr_t H5Pset_virtual_prefix(hid_t dapl_id, const char *prefix); -H5_DLL ssize_t H5Pget_virtual_prefix(hid_t dapl_id, char *prefix /*out*/, size_t size); -H5_DLL herr_t H5Pset_append_flush(hid_t plist_id, unsigned ndims, const hsize_t boundary[], - H5D_append_cb_t func, void *udata); -H5_DLL herr_t H5Pget_append_flush(hid_t plist_id, unsigned dims, hsize_t boundary[], H5D_append_cb_t *func, - void **udata); -H5_DLL herr_t H5Pset_efile_prefix(hid_t dapl_id, const char *prefix); +/** + * \ingroup DAPL + * + * \brief Retrieves the values of the append property that is set up in + * the dataset access property list + * + * \dapl_id + * \param[in] dims The number of elements for \p boundary + * \param[in] boundary The dimension sizes used to determine the boundary + * \param[in] func The user-defined callback function + * \param[in] udata The user-defined input data + * + * \return \herr_t + * + * \details H5Pget_append_flush() obtains the following information + * from the dataset access property list, \p dapl_id. + * + * \p boundary consists of the sizes set up in the access + * property list that are used to determine when a dataset + * dimension size hits the boundary. Only at most \p dims + * boundary sizes are retrieved, and \p dims will not exceed + * the corresponding value that is set in the property list. + * + * \p func is the user-defined callback function to invoke when + * a dataset’s appended dimension size reaches a boundary and + * \p udata is the user-defined input data for the callback + * function. + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pget_append_flush(hid_t dapl_id, unsigned dims, hsize_t boundary[], H5D_append_cb_t *func, + void **udata); +/** + * \ingroup DAPL + * + * \brief Retrieves the raw data chunk cache parameters + * + * \dapl_id + * \param[out] rdcc_nslots Number of chunk slots in the raw data chunk + * cache hash table + * \param[out] rdcc_nbytes Total size of the raw data chunk cache, in + * bytes + * \param[out] rdcc_w0 Preemption policy + * + * \return \herr_t + * + * \details H5Pget_chunk_cache() retrieves the number of chunk slots in + * the raw data chunk cache hash table, the maximum possible + * number of bytes in the raw data chunk cache, and the + * preemption policy value. + * + * These values are retrieved from a dataset access property + * list. If the values have not been set on the property list, + * then values returned will be the corresponding values from + * a default file access property list. + * + * Any (or all) pointer arguments may be null pointers, in which + * case the corresponding data is not returned. + * + * \since 1.8.3 + * + */ +H5_DLL herr_t H5Pget_chunk_cache(hid_t dapl_id, size_t *rdcc_nslots /*out*/, size_t *rdcc_nbytes /*out*/, + double *rdcc_w0 /*out*/); +/** + * \ingroup DAPL + * + * \brief Retrieves the prefix for external raw data storage files as set + * in the dataset access property list + * + * \dapl_id + * \param[in,out] prefix Dataset external storage prefix in UTF-8 or + * ASCII (\em Path and \em filename must be ASCII + * on Windows systems.) + * \param[in] size Size of prefix buffer in bytes + * + * \return Returns the size of \p prefix and the prefix string will be + * stored in \p prefix if successful. + * Otherwise returns a negative value and the contents of \p prefix + * will be undefined. + * + * \details H5Pget_efile_prefix() retrieves the file system path prefix + * for locating external files associated with a dataset that + * uses external storage. This will be the value set with + * H5Pset_efile_prefix() or the HDF5 library’s default. + * + * The value of \p size is the size in bytes of the prefix, + * including the NULL terminator. If the size is unknown, a + * preliminary H5Pget_elink_prefix() call with the pointer + * \p prefix set to NULL will return the size of the prefix + * without the NULL terminator. + * + * The \p prefix buffer must be allocated by the caller. In a + * call that retrieves the actual prefix, that buffer must be + * of the size specified in \p size. + * + * \note See H5Pset_efile_prefix() for a more complete description of + * file location behavior and for notes on the use of the + * HDF5_EXTFILE_PREFIX environment variable. + * + * \since 1.10.0, 1.8.17 + * + */ H5_DLL ssize_t H5Pget_efile_prefix(hid_t dapl_id, char *prefix /*out*/, size_t size); +/** + * \ingroup DAPL + * + * \brief Retrieves prefix applied to VDS source file paths + * + * \dapl_id + * \param[out] prefix Prefix applied to VDS source file paths + * \param[in] size Size of prefix, including null terminator + * + * \return If successful, returns a non-negative value specifying the size + * in bytes of the prefix without the NULL terminator; otherwise + * returns a negative value. + * + * \details H5Pget_virtual_prefix() retrieves the prefix applied to the + * path of any VDS source files traversed. + * + * When an VDS source file is traversed, the prefix is retrieved + * from the dataset access property list \p dapl_id, returned + * in the user-allocated buffer pointed to by \p prefix, and + * prepended to the filename stored in the VDS virtual file, set + * with H5Pset_virtual(). + * + * The size in bytes of the prefix, including the NULL terminator, + * is specified in \p size. If \p size is unknown, a preliminary + * H5Pget_virtual_prefix() call with the pointer \p prefix set to + * NULL will return the size of the prefix without the NULL + * terminator. + * + * \see_virtual + * + * \since 1.10.2 + * + */ +H5_DLL ssize_t H5Pget_virtual_prefix(hid_t dapl_id, char *prefix /*out*/, size_t size); +/** + * \ingroup DAPL + * + * \brief Returns the maximum number of missing source files and/or datasets + * with the printf-style names when getting the extent for an unlimited + * virtual dataset + * + * \dapl_id + * \param[out] gap_size Maximum number of the files and/or datasets + * allowed to be missing for determining the extent + * of an unlimited virtual dataset with printf-style + * mappings. (\em Default: 0) + * + * \return \herr_t + * + * \details H5Pget_virtual_printf_gap() returns the maximum number of + * missing printf-style files and/or datasets for determining the + * extent of an unlimited virtual dataaset, \p gap_size, using + * the access property list for the virtual dataset, \p dapl_id. + * + * The default library value for \p gap_size is 0 (zero). + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pget_virtual_printf_gap(hid_t dapl_id, hsize_t *gap_size); +/** + * \ingroup DAPL + * + * \brief Retrieves the view of a virtual dataset accessed with + * \p dapl_id + * + * \dapl_id + * \param[out] view The flag specifying the view of the virtual dataset. + * Valid values are: + * \li #H5D_VDS_FIRST_MISSING + * \li #H5D_VDS_LAST_AVAILABLE + * + * \return \herr_t + * + * \details H5Pget_virtual_view() takes the virtual dataset access property + * list, \p dapl_id, and retrieves the flag, \p view, set by the + * H5Pset_virtual_view() call. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pget_virtual_view(hid_t dapl_id, H5D_vds_view_t *view); +/** + * \ingroup DAPL + * + * \brief Sets two actions to perform when the size of a dataset’s + * dimension being appended reaches a specified boundary + * + * \dapl_id + * \param[in] ndims The number of elements for boundary + * \param[in] boundary The dimension sizes used to determine the boundary + * \param[in] func The user-defined callback function + * \param[in] udata The user-defined input data + * + * \return \herr_t + * + * \details H5Pset_append_flush() sets the following two actions to + * perform for a dataset associated with the dataset access + * property list \p dapl_id: + * + * \li Call the callback function \p func set in the property + * list + * \li Flush the dataset associated with the dataset access + * property list + * + * When a user is appending data to a dataset via H5DOappend() + * and the dataset’s newly extended dimension size hits a + * specified boundary, the library will perform the first action + * listed above. Upon return from the callback function, the + * library will then perform the second action listed above and + * return to the user. If no boundary is hit or set, the two + * actions above are not invoked. + * + * The specified boundary is indicated by the parameter + * \p boundary. It is a 1-dimensional array with \p ndims + * elements, which should be the same as the rank of the + * dataset’s dataspace. While appending to a dataset along a + * particular dimension index via H5Dappend(), the library + * determines a boundary is reached when the resulting dimension + * size is divisible by \p boundary[index]. A zero value for + * \p boundary[index] indicates no boundary is set for that + * dimension index. + * + * The setting of this property will apply only for a chunked + * dataset with an extendible dataspace. A dataspace is extendible + * when it is defined with either one of the following: + * + * \li A dataspace with fixed current and maximum dimension sizes + * \li A dataspace with at least one unlimited dimension for its + * maximum dimension size + * + * When creating or opening a chunked dataset, the library will + * check whether the boundary as specified in the access property + * list is set up properly. The library will fail the dataset + * create or open if the following conditions are true: + * + * \li \p ndims, the number of elements for boundary, is not the + * same as the rank of the dataset’s dataspace. + * \li A non-zero boundary value is specified for a non-extendible + * dimension. + * + * The callback function \p func must conform to the following + * prototype: + * \snippet H5Dpublic.h H5D_append_cb_t_snip + * + * The parameters of the callback function, per the above + * prototype, are defined as follows: + * + * \li \p dataset_id is the dataset identifier. + * \li \p cur_dims is the dataset’s current dimension sizes when + * a boundary is hit. + * \li \p user_data is the user-defined input data. + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pset_append_flush(hid_t dapl_id, unsigned ndims, const hsize_t boundary[], + H5D_append_cb_t func, void *udata); +/** + * \ingroup DAPL + * + * \brief Sets the raw data chunk cache parameters + * + * \dapl_id + * \param[in] rdcc_nslots The number of chunk slots in the raw data chunk + * cache for this dataset. Increasing this value + * reduces the number of cache collisions, but + * slightly increases the memory used. Due to the + * hashing strategy, this value should ideally be a + * prime number. As a rule of thumb, this value + * should be at least 10 times the number of chunks + * that can fit in \p rdcc_nbytes bytes. For maximum + * performance, this value should be set + * approximately 100 times that number of chunks. + * The default value is 521. If the value passed is + * #H5D_CHUNK_CACHE_NSLOTS_DEFAULT, then the + * property will not be set on \p dapl_id and the + * parameter will come from the file access + * property list used to open the file. + * \param[in] rdcc_nbytes The total size of the raw data chunk cache for + * this dataset. In most cases increasing this + * number will improve performance, as long as + * you have enough free memory. + * The default size is 1 MB. If the value passed is + * #H5D_CHUNK_CACHE_NBYTES_DEFAULT, then the + * property will not be set on \p dapl_id and the + * parameter will come from the file access + * property list. + * \param[in] rdcc_w0 The chunk preemption policy for this dataset. + * This must be between 0 and 1 inclusive and + * indicates the weighting according to which chunks + * which have been fully read or written are + * penalized when determining which chunks to flush + * from cache. A value of 0 means fully read or + * written chunks are treated no differently than + * other chunks (the preemption is strictly LRU) + * while a value of 1 means fully read or written + * chunks are always preempted before other chunks. + * If your application only reads or writes data + * once, this can be safely set to 1. Otherwise, + * this should be set lower, depending on how often + * you re-read or re-write the same data. + * The default value is 0.75. If the value passed is + * #H5D_CHUNK_CACHE_W0_DEFAULT, then the property + * will not be set on \p dapl_id and the parameter + * will come from the file access property list. + * + * \return \herr_t + * + * \details H5Pset_chunk_cache() sets the number of elements, the total + * number of bytes, and the preemption policy value in the raw + * data chunk cache on a dataset access property list. After + * calling this function, the values set in the property list + * will override the values in the file's file access property + * list. + * + * The raw data chunk cache inserts chunks into the cache + * by first computing a hash value using the address of a chunk, + * then using that hash value as the chunk's index into the table + * of cached chunks. The size of this hash table, i.e., and the + * number of possible hash values, is determined by the + * \p rdcc_nslots parameter. If a different chunk in the cache + * has the same hash value, this causes a collision, which + * reduces efficiency. If inserting the chunk into cache would + * cause the cache to be too big, then the cache is pruned + * according to the \p rdcc_w0 parameter. + * + * \b Motivation: H5Pset_chunk_cache() is used to adjust the chunk + * cache parameters on a per-dataset basis, as opposed to a global + * setting for the file using H5Pset_cache(). The optimum chunk + * cache parameters may vary widely with different data layout and + * access patterns, so for optimal performance they must be set + * individually for each dataset. It may also be beneficial to + * reduce the size of the chunk cache for datasets whose + * performance is not important in order to save memory space. + * + * \b Example \b Usage: The following code sets the chunk cache to + * use a hash table with 12421 elements and a maximum size of + * 16 MB, while using the preemption policy specified for the + * entire file: + * \Code{ + * H5Pset_chunk_cache(dapl_id, 12421, 16*1024*1024, + * H5D_CHUNK_CACHE_W0_DEFAULT);} + * + * \b Usage \b Notes: The chunk cache size is a property for + * accessing a dataset and is not stored with a dataset or a + * file. To guarantee the same chunk cache settings each time + * the dataset is opened, call H5Dopen() with a dataset access + * property list where the chunk cache size is set by calling + * H5Pset_chunk_cache() for that property list. The property + * list can be used for multiple accesses in the same + * application. + * + * For files where the same chunk cache size will be + * appropriate for all or most datasets, H5Pset_cache() can + * be called with a file access property list to set the + * chunk cache size for accessing all datasets in the file. + * + * Both methods can be used in combination, in which case + * the chunk cache size set by H5Pset_cache() will apply + * except for specific datasets where H5Dopen() is called + * with dataset property list with the chunk cache size + * set by H5Pset_chunk_cache(). + * + * In the absence of any cache settings, H5Dopen() will + * by default create a 1 MB chunk cache for the opened + * dataset. If this size happens to be appropriate, no + * call will be needed to either function to set the + * chunk cache size. + * + * It is also possible that a change in access pattern + * for later access to a dataset will change the + * appropriate chunk cache size. + * + * \since 1.8.3 + * + */ +H5_DLL herr_t H5Pset_chunk_cache(hid_t dapl_id, size_t rdcc_nslots, size_t rdcc_nbytes, double rdcc_w0); +/** + * \ingroup DAPL + * + * \brief Sets the external dataset storage file prefix in the dataset + * access property list + * + * \dapl_id + * \param[in] prefix Dataset external storage prefix in UTF-8 or ASCII + * (<em>Path and filename must be ASCII on Windows systems.</em>) + * + * \return \herr_t + * + * \details H5Pset_efile_prefix() sets the prefix used to locate raw data + * files for a dataset that uses external storage. This prefix + * can provide either an absolute path or a relative path to the + * external files. + * + * H5Pset_efile_prefix() is used in conjunction with + * H5Pset_external() to control the behavior of the HDF5 library + * when searching for the raw data files associated with a dataset + * that uses external storage: + * + * \li The default behavior of the library is to search for the + * dataset’s external storage raw data files in the same + * directory as the HDF5 file which contains the dataset. + * \li If the prefix is set to an absolute path, the target + * directory will be searched for the dataset’s external + * storage raw data files. + * \li If the prefix is set to a relative path, the target + * directory, relative to the current working directory, will + * be searched for the dataset’s external storage raw data + * files. + * \li If the prefix is set to a relative path that begins with + * the special token ${ORIGIN}, that directory, relative to + * the HDF5 file containing the dataset, will be searched for + * the dataset’s external storage raw data files. + * + * The HDF5_EXTFILE_PREFIX environment variable can be used to + * override the above behavior (the environment variable + * supersedes the API call). Setting the variable to a path + * string and calling H5Dcreate() or H5Dopen() is the equivalent + * of calling H5Pset_efile_prefix() and calling the same create + * or open function. The environment variable is checked at the + * time of the create or open action and copied so it can be + * safely changed after the H5Dcreate() or H5Dopen() call. + * + * Calling H5Pset_efile_prefix() with \p prefix set to NULL or + * the empty string returns the search path to the default. The + * result would be the same as if H5Pset_efile_prefix() had never + * been called. + * + * \note If the external file prefix is not an absolute path and the HDF5 + * file is moved, the external storage files will also need to be + * moved so they can be accessed at the new location. + * + * \note As stated above, the use of the HDF5_EXTFILE_PREFIX environment + * variable overrides any property list setting. + * H5Pset_efile_prefix() and H5Pget_efile_prefix(), being property + * functions, set and retrieve only the property list setting; they + * are unaware of the environment variable. + * + * \note On Windows, the prefix must be an ASCII string since the Windows + * standard C library’s I/O functions cannot handle UTF-8 file names. + * + * \since 1.10.0, 1.8.17 + * + */ +H5_DLL herr_t H5Pset_efile_prefix(hid_t dapl_id, const char *prefix); +/** + * \ingroup DAPL + * + * \brief Sets prefix to be applied to VDS source file paths + * + * \dapl_id + * \param[in] prefix Prefix to be applied to VDS source file paths + * + * \return \herr_t + * + * \details H5Pset_virtual_prefix() sets the prefix to be applied to the + * path of any VDS source files traversed. The prefix is prepended + * to the filename stored in the VDS virtual file, set with + * H5Pset_virtual(). + * + * The prefix is specified in the user-allocated buffer \p prefix + * and set in the dataset access property list \p dapl_id. The + * buffer should not be freed until the property list has been + * closed. + * + * \see_virtual + * + * \since 1.10.2 + * + */ +H5_DLL herr_t H5Pset_virtual_prefix(hid_t dapl_id, const char *prefix); +/** + * \ingroup DAPL + * + * \brief Sets the maximum number of missing source files and/or datasets + * with the printf-style names when getting the extent of an + * unlimited virtual dataset + * + * \dapl_id + * \param[in] gap_size Maximum number of files and/or datasets allowed to + * be missing for determining the extent of an + * unlimited virtual dataset with printf-style + * mappings (<em>Default value</em>: 0) + * + * \return \herr_t + * + * \details H5Pset_virtual_printf_gap() sets the access property list for + * the virtual dataset, \p dapl_id, to instruct the library to + * stop looking for the mapped data stored in the files and/or + * datasets with the printf-style names after not finding + * \p gap_size files and/or datasets. The found source files and + * datasets will determine the extent of the unlimited virtual + * dataset with the printf-style mappings. + * + * Consider the following examples where the regularly spaced + * blocks of a virtual dataset are mapped to datasets with the + * names d-1, d-2, d-3, ..., d-N, ... : + * + * \li If the dataset d-2 is missing and \p gap_size is set to 0, + * then the virtual dataset will contain only data found + * in d-1. + * \li If d-2 and d-3 are missing and \p gap_size is set to 2, + * then the virtual dataset will contain the data from + * d-1, d-3, ..., d-N, ... . The blocks that are mapped to + * d-2 and d-3 will be filled according to the virtual + * dataset’s fill value setting. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pset_virtual_printf_gap(hid_t dapl_id, hsize_t gap_size); +/** + * \ingroup DAPL + * + * \brief Sets the view of the virtual dataset (VDS) to include or exclude + * missing mapped elements + * + * \dapl_id + * \param[in] view Flag specifying the extent of the data to be included + * in the view. Valid values are: + * \li #H5D_VDS_FIRST_MISSING: View includes all data + * before the first missing mapped data + * \li #H5D_VDS_LAST_AVAILABLE View includes all + * available mapped data + * + * \return \herr_t + * + * \details H5Pset_virtual_view() takes the access property list for the + * virtual dataset, \p dapl_id, and the flag, \p view, and sets + * the VDS view according to the flag value. + * + * If \p view is set to #H5D_VDS_FIRST_MISSING, the view includes + * all data before the first missing mapped data. This setting + * provides a view containing only the continuous data starting + * with the dataset’s first data element. Any break in + * continuity terminates the view. + * + * If \p view is set to #H5D_VDS_LAST_AVAILABLE, the view + * includes all available mapped data. + * + * Missing mapped data is filled with the fill value set in the + * VDS creation property list. + * + * \see_virtual + * + * \since 1.10.0 + * + */ +H5_DLL herr_t H5Pset_virtual_view(hid_t dapl_id, H5D_vds_view_t view); /* Dataset xfer property list (DXPL) routines */ -H5_DLL herr_t H5Pset_data_transform(hid_t plist_id, const char *expression); -H5_DLL ssize_t H5Pget_data_transform(hid_t plist_id, char *expression /*out*/, size_t size); -H5_DLL herr_t H5Pset_buffer(hid_t plist_id, size_t size, void *tconv, void *bkg); -H5_DLL size_t H5Pget_buffer(hid_t plist_id, void **tconv /*out*/, void **bkg /*out*/); -H5_DLL herr_t H5Pset_preserve(hid_t plist_id, hbool_t status); -H5_DLL int H5Pget_preserve(hid_t plist_id); -H5_DLL herr_t H5Pset_edc_check(hid_t plist_id, H5Z_EDC_t check); +/** + * + * \ingroup DXPL + * + * \brief Gets B-tree split ratios for a dataset transfer property list + * + * \dxpl_id{plist_id} + * \param[out] left The B-tree split ratio for left-most nodes + * \param[out] middle The B-tree split ratio for right-most nodes and lone nodes + * \param[out] right The B-tree split ratio for all other nodes + * \return \herr_t + * + * \details H5Pget_btree_ratios() returns the B-tree split ratios for a dataset + * transfer property list. + * + * The B-tree split ratios are returned through the non-NULL arguments + * \p left, \p middle, and \p right, as set by the H5Pset_btree_ratios() + * function. + * + */ +H5_DLL herr_t H5Pget_btree_ratios(hid_t plist_id, double *left /*out*/, double *middle /*out*/, + double *right /*out*/); +/** + * + * \ingroup DXPL + * + * \brief Reads buffer settings + * + * \param[in] plist_id Identifier for the dataset transfer property list + * \param[out] tconv Address of the pointer to application-allocated type + * conversion buffer + * \param[out] bkg Address of the pointer to application-allocated + * background buffer + * + * \return Returns buffer size, in bytes, if successful; otherwise 0 on failure. + * + * \details H5Pget_buffer() reads values previously set with H5Pset_buffer(). + * + * \version 1.6.0 The return type changed from \p hsize_t to \p size_t. + * \version 1.4.0 The return type changed to \p hsize_t. + * + */ +H5_DLL size_t H5Pget_buffer(hid_t plist_id, void **tconv /*out*/, void **bkg /*out*/); +/** + * + * \ingroup DXPL + * + * \brief Retrieves a data transform expression + * + * \param[in] plist_id Identifier of the property list or class + * \param[out] expression Pointer to memory where the transform expression will + * be copied + * \param[in] size Number of bytes of the transform expression to copy + * to + * + * \return Success: the size of the transform expression. Failure: a negative + * value. + * + * \details H5Pget_data_transform() retrieves the data transform expression + * previously set in the dataset transfer property list \p plist_id + * by H5Pset_data_transform(). + * + * H5Pget_data_transform() can be used to both retrieve the transform + * expression and query its size. + * + * If \p expression is non-NULL, up to \p size bytes of the data + * transform expression are written to the buffer. If \p expression + * is NULL, \p size is ignored, and the function does not write + * anything to the buffer. The function always returns the size of + * the data transform expression. + * + * If 0 is returned for the size of the expression, no data transform + * expression exists for the property list. + * + * If an error occurs, the buffer pointed to by \p expression is + * unchanged, and the function returns a negative value. + * + * \par Example + * An example snippet from examples/h5_dtransform.c: + * \snippet h5_dtransform.c H5Pget_data_transform_snip + * + * \since 1.8.0 + * + */ +H5_DLL ssize_t H5Pget_data_transform(hid_t plist_id, char *expression /*out*/, size_t size); +/** + * + * \ingroup DXPL + * + * \brief Determines whether error-detection is enabled for dataset reads + * + * \param[in] plist_id Dataset transfer property list identifier + * + * \return Returns \p H5Z_ENABLE_EDC or \p H5Z_DISABLE_EDC if successful; + * otherwise returns a negative value. + * + * \details H5Pget_edc_check() queries the dataset transfer property + * list \p plist to determine whether error detection is enabled for + * data read operations. + * + * \since 1.6.0 + * + */ H5_DLL H5Z_EDC_t H5Pget_edc_check(hid_t plist_id); -H5_DLL herr_t H5Pset_filter_callback(hid_t plist_id, H5Z_filter_func_t func, void *op_data); -H5_DLL herr_t H5Pset_btree_ratios(hid_t plist_id, double left, double middle, double right); -H5_DLL herr_t H5Pget_btree_ratios(hid_t plist_id, double *left /*out*/, double *middle /*out*/, - double *right /*out*/); -H5_DLL herr_t H5Pset_vlen_mem_manager(hid_t plist_id, H5MM_allocate_t alloc_func, void *alloc_info, - H5MM_free_t free_func, void *free_info); -H5_DLL herr_t H5Pget_vlen_mem_manager(hid_t plist_id, H5MM_allocate_t *alloc_func, void **alloc_info, - H5MM_free_t *free_func, void **free_info); -H5_DLL herr_t H5Pset_hyper_vector_size(hid_t fapl_id, size_t size); -H5_DLL herr_t H5Pget_hyper_vector_size(hid_t fapl_id, size_t *size /*out*/); -H5_DLL herr_t H5Pset_type_conv_cb(hid_t dxpl_id, H5T_conv_except_func_t op, void *operate_data); -H5_DLL herr_t H5Pget_type_conv_cb(hid_t dxpl_id, H5T_conv_except_func_t *op, void **operate_data); +/** + * + * \ingroup DXPL + * + * \brief Retrieves number of I/O vectors to be read/written in hyperslab I/O + * + * \param[in] fapl_id Dataset transfer property list identifier + * \param[out] size Number of I/O vectors to accumulate in memory for I/O operations + * + * \return \herr_t + * + * \details H5Pget_hyper_vector_size() retrieves the number of I/O vectors to be accumulated in + * memory before being issued to the lower levels of the HDF5 library for reading or + * writing the actual data. + * + * The number of I/O vectors set in the dataset transfer property list \p fapl_id is + * returned in \p size. Unless the default value is in use, \p size was + * previously set with a call to H5Pset_hyper_vector_size(). + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pget_hyper_vector_size(hid_t fapl_id, size_t *size /*out*/); +/** + * + * \ingroup DXPL + * + * \brief Checks status of the dataset transfer property list (\b DEPRECATED) + * + * \deprecated{H5Pget_preserve() is deprecated as it is no longer useful; + * compound datatype field preservation is now core functionality + * in the HDF5 library.} + * + * \param[in] plist_id Identifier for the dataset transfer property list + * + * \return Returns 1 or 0 if successful; otherwise returns a negative value. + * + * \details H5Pget_preserve() checks the status of the dataset transfer + * property list. + * + * \version 1.6.0 The flag parameter was changed from INTEGER to LOGICAL to + * better match the C API. (Fortran 90) + * + */ +H5_DLL int H5Pget_preserve(hid_t plist_id); +/** + * + * \ingroup DXPL + * + * \brief Gets user-defined datatype conversion callback function + * + * \param[in] dxpl_id Dataset transfer property list identifier + * \param[out] op User-defined type conversion callback function + * \param[out] operate_data User-defined input data for the callback function + * + * \return \herr_t + * + * \details H5Pget_type_conv_cb() gets the user-defined datatype conversion + * callback function \p op in the dataset transfer property list + * \p dxpl_id. + * + * The parameter \p operate_data is a pointer to user-defined input + * data for the callback function. + * + * The callback function \p op defines the actions an application is + * to take when there is an exception during datatype conversion. + * + * Please refer to the function H5Pset_type_conv_cb() for more details. + * + */ +H5_DLL herr_t H5Pget_type_conv_cb(hid_t dxpl_id, H5T_conv_except_func_t *op, void **operate_data); +/** + * + * \ingroup DXPL + * + * \brief Gets the memory manager for variable-length datatype allocation in H5Dread() and H5Dvlen_reclaim() + * + * \param[in] plist_id Identifier for the dataset transfer property list + * \param[out] alloc_func User's allocate routine, or NULL for system malloc + * \param[out] alloc_info Extra parameter for user’s allocation routine. + * Contents are ignored if preceding + * parameter is NULL \param[out] free_func User's free routine, or NULL for + * system free \param[out] free_info + * Extra parameter for user’s free routine. Contents are ignored if preceding + * parameter is NULL + * + * \return \herr_t + * + * \details H5Pget_vlen_mem_manager() is the companion function to + * H5Pset_vlen_mem_manager(), returning the parameters set by + * that function. + * + */ +H5_DLL herr_t H5Pget_vlen_mem_manager(hid_t plist_id, H5MM_allocate_t *alloc_func, void **alloc_info, + H5MM_free_t *free_func, void **free_info); +/** + * + * \ingroup DXPL + * + * \brief Sets B-tree split ratios for a dataset transfer property list + * + * \param[in] plist_id The dataset transfer property list identifier + * \param[in] left The B-tree split ratio for left-most nodes + * \param[in] middle The B-tree split ratio for all other nodes + * \param[in] right The B-tree split ratio for right-most nodes and lone + * nodes + * + * \return \herr_t + * + * \details H5Pset_btree_ratios() sets the B-tree split ratios for a dataset + * transfer property list. The split ratios determine what percent of + * children go in the first node when a node splits. + * + * The ratio \p left is used when the splitting node is the left-most + * node at its level in the tree; + * the ratio \p right is used when the splitting node is the right-most + * node at its level; and + * the ratio \p middle is used for all other cases. + * + * A node that is the only node at its level in the tree uses the + * ratio \p right when it splits. + * + * All ratios are real numbers between 0 and 1, inclusive. + * + */ +H5_DLL herr_t H5Pset_btree_ratios(hid_t plist_id, double left, double middle, double right); + +/** + * + * \ingroup DXPL + * + * \brief Sets type conversion and background buffers + * + * \dxpl_id{plist_id} + * \param[in] size Size, in bytes, of the type conversion and background buffers + * \param[in] tconv Pointer to application-allocated type conversion buffer + * \param[in] bkg Pointer to application-allocated background buffer + * \return \herr_t + * + * \details Given a dataset transfer property list, H5Pset_buffer() sets the + * maximum size for the type conversion buffer and background buffer + * and optionally supplies pointers to application-allocated + * buffers. If the buffer size is smaller than the entire amount of + * data being transferred between the application and the file, and a + * type conversion buffer or background buffer is required, then strip + * mining will be used. + * + * Note that there are minimum size requirements for the buffer. Strip + * mining can only break the data up along the first dimension, so the + * buffer must be large enough to accommodate a complete slice that + * encompasses all of the remaining dimensions. For example, when strip + * mining a \Code{100x200x300} hyperslab of a simple data space, the + * buffer must be large enough to hold \Code{1x200x300} data + * elements. When strip mining a \Code{100x200x300x150} hyperslab of a + * simple data space, the buffer must be large enough to hold + * \Code{1x200x300x150} data elements. + * + * If \p tconv and/or \p bkg are null pointers, then buffers will be + * allocated and freed during the data transfer. + * + * The default value for the maximum buffer is 1 MiB. + * + * \version 1.6.0 The \p size parameter has changed from type hsize_t to \c size_t. + * \version 1.4.0 The \p size parameter has changed to type hsize_t. + * + */ +H5_DLL herr_t H5Pset_buffer(hid_t plist_id, size_t size, void *tconv, void *bkg); + +/** + * \ingroup DXPL + * + * \brief Sets a data transform expression + * + * \dxpl_id{plist_id} + * \param[in] expression Pointer to the null-terminated data transform + * expression + * \return \herr_t + * + * \details H5Pset_data_transform() sets the data transform to be used for + * reading and writing data. This function operates on the dataset + * transfer property list \p plist_id. + * + * The \p expression parameter is a string containing an algebraic + * expression, such as \Code{(5/9.0)*(x-32)} or \Code{x*(x-5)}. When a + * dataset is read or written with this property list, the transform + * expression is applied with the \c x being replaced by the values in + * the dataset. When reading data, the values in the file are not + * changed and the transformed data is returned to the user. + * + * Data transforms can only be applied to integer or + * floating-point datasets. Order of operations is obeyed and + * the only supported operations are +, -, *, and /. Parentheses + * can be nested arbitrarily and can be used to change precedence. + * When writing data back to the dataset, the transformed data is + * written to the file and there is no way to recover the original + * values to which the transform was applied. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_data_transform(hid_t plist_id, const char *expression); + +/** + * \ingroup DXPL + * + * \brief Sets the dataset transfer property list to enable or disable error + * detection when reading data + * + * \dxpl_id{plist_id} + * \param[in] check Specifies whether error checking is enabled or disabled + * for dataset read operations + * \return \herr_t + * + * \details H5Pset_edc_check() sets the dataset transfer property list \p plist + * to enable or disable error detection when reading data. + * + * Whether error detection is enabled or disabled is specified in the + * \p check parameter. Valid values are #H5Z_ENABLE_EDC (default) and + * #H5Z_DISABLE_EDC. + * + * \note The initial error detection implementation, Fletcher32 checksum, + * supports error detection for chunked datasets only. + * + * \attention The Fletcher32 EDC checksum filter, set with H5Pset_fletcher32(), + * was added in HDF5 Release 1.6.0. In the original implementation, + * however, the checksum value was calculated incorrectly on + * little-endian systems. The error was fixed in HDF5 Release 1.6.3.\n + * As a result of this fix, an HDF5 library of Release 1.6.0 through + * Release 1.6.2 cannot read a dataset created or written with + * Release 1.6.3 or later if the dataset was created with the + * checksum filter and the filter is enabled in the reading + * library. (Libraries of Release 1.6.3 and later understand the + * earlier error and compensate appropriately.)\n + * \Bold{Work-around:} An HDF5 library of Release 1.6.2 or earlier + * will be able to read a dataset created or written with the + * checksum filter by an HDF5 library of Release 1.6.3 or later if + * the checksum filter is disabled for the read operation. This can + * be accomplished via an H5Pset_edc_check() call with the value + * #H5Z_DISABLE_EDC in the second parameter. This has the obvious + * drawback that the application will be unable to verify the + * checksum, but the data does remain accessible. + * + * \version 1.6.3 Error in checksum calculation on little-endian systems + * corrected in this release. + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_edc_check(hid_t plist_id, H5Z_EDC_t check); + +/** + * \ingroup DXPL + * + * \brief Sets user-defined filter callback function + * + * \dxpl_id{plist_id} + * \param[in] func User-defined filter callback function + * \param[in] op_data User-defined input data for the callback function + * \return \herr_t + * + * \details H5Pset_filter_callback() sets the user-defined filter callback + * function \p func in the dataset transfer property list \p plist_id. + * + * The parameter \p op_data is a pointer to user-defined input data for + * the callback function and will be passed through to the callback + * function. + * + * The callback function \p func defines the actions an application is + * to take when a filter fails. The function prototype is as follows: + * \snippet H5Zpublic.h H5Z_filter_func_t_snip + * where \c filter indicates which filter has failed, \c buf and \c buf_size + * are used to pass in the failed data, and op_data is the required + * input data for this callback function. + * + * Valid callback function return values are #H5Z_CB_FAIL and #H5Z_CB_CONT. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_filter_callback(hid_t plist_id, H5Z_filter_func_t func, void *op_data); + +/** + * \ingroup DXPL + * + * \brief Sets number of I/O vectors to be read/written in hyperslab I/O + * + * \dxpl_id{plist_id} + * \param[in] size Number of I/O vectors to accumulate in memory for I/O + * operations\n + * Must be greater than 1 (one)\n + * Default value: 1024 + * \return \herr_t + * + * \details H5Pset_hyper_vector_size() sets the number of I/O vectors to be + * accumulated in memory before being issued to the lower levels of + * the HDF5 library for reading or writing the actual data. + * + * The I/O vectors are hyperslab offset and length pairs and are + * generated during hyperslab I/O. + * + * The number of I/O vectors is passed in \p size to be set in the + * dataset transfer property list \p plist_id. \p size must be + * greater than 1 (one). + * + * H5Pset_hyper_vector_size() is an I/O optimization function; + * increasing vector_size should provide better performance, but the + * library will use more memory during hyperslab I/O. The default value + * of \p size is 1024. + * + * \since 1.6.0 + * + */ +H5_DLL herr_t H5Pset_hyper_vector_size(hid_t plist_id, size_t size); + +/** + * \ingroup DXPL + * + * \brief Sets the dataset transfer property list \p status + * + * \dxpl_id{plist_id} + * \param[in] status Status toggle of the dataset transfer property list + * \return \herr_t + * + * \deprecated This function is deprecated as it no longer has any effect; + * compound datatype field preservation is now core functionality in + * the HDF5 library. + * + * \details H5Pset_preserve() sets the dataset transfer property list status to + * \c 1 or \c 0. + * + * When reading or writing compound datatypes and the destination is + * partially initialized and the read/write is intended to initialize + * the other members, one must set this property to \c 1. Otherwise the + * I/O pipeline treats the destination datapoints as completely + * uninitialized. + * + * \todo Add missing version information: introduction, deprecation, etc. + * Why is the declaration not in the deprecated section? + * + */ +H5_DLL herr_t H5Pset_preserve(hid_t plist_id, hbool_t status); + +/** + * \ingroup DXPL + * + * \brief Sets user-defined datatype conversion callback function + * + * \dxpl_id + * \param[in] op User-defined type conversion callback function + * \param[in] operate_data User-defined input data for the callback function + * \return \herr_t + * + * \details H5Pset_type_conv_cb() sets the user-defined datatype conversion + * callback function \p op in the dataset transfer property list \p + * dxpl_id + * + * The parameter operate_data is a pointer to user-defined input data + * for the callback function and will be passed through to the callback + * function. + * + * The callback function \p op defines the actions an application is to + * take when there is an exception during datatype conversion. The + * function prototype is as follows: + * \snippet H5Tpublic.h H5T_conv_except_func_t_snip + * + * \todo Add version information. + * + */ +H5_DLL herr_t H5Pset_type_conv_cb(hid_t dxpl_id, H5T_conv_except_func_t op, void *operate_data); + +/** + * \ingroup DXPL + * + * \brief Sets the memory manager for variable-length datatype allocation in + * H5Dread() and H5Dvlen_reclaim() + * + * \dxpl_id{plist_id} + * \param[in] alloc_func User's allocate routine, or \c NULL for system \c malloc + * \param[in] alloc_info Extra parameter for user's allocation routine. + * Contents are ignored if preceding parameter is \c NULL. + * \param[in] free_func User's free routine, or \c NULL for system \c free + * \param[in] free_info Extra parameter for user's free routine. Contents are + * ignored if preceding parameter is \c NULL + * \return \herr_t + * + * \details H5Pset_vlen_mem_manager() sets the memory manager for + * variable-length datatype allocation in H5Dread() and free in + * H5Dvlen_reclaim(). + * + * The \p alloc_func and \p free_func parameters identify the memory + * management routines to be used. If the user has defined custom + * memory management routines, \p alloc_func and/or free_func should be + * set to make those routine calls (i.e., the name of the routine is + * used as the value of the parameter); if the user prefers to use the + * system's \c malloc and/or \c free, the \p alloc_func and \p + * free_func parameters, respectively, should be set to \c NULL + * + * The prototypes for these user-defined functions are as follows: + * \snippet H5MMpublic.h H5MM_allocate_t_snip + * + * \snippet H5MMpublic.h H5MM_free_t_snip + * + * The \p alloc_info and \p free_info parameters can be used to pass + * along any required information to the user's memory management + * routines. + * + * In summary, if the user has defined custom memory management + * routines, the name(s) of the routines are passed in the \p + * alloc_func and \p free_func parameters and the custom routines' + * parameters are passed in the \p alloc_info and \p free_info + * parameters. If the user wishes to use the system \c malloc and \c + * free functions, the \p alloc_func and/or \p free_func parameters are + * set to \c NULL and the \p alloc_info and \p free_info parameters are + * ignored. + * + * \todo Add version information. + */ +H5_DLL herr_t H5Pset_vlen_mem_manager(hid_t plist_id, H5MM_allocate_t alloc_func, void *alloc_info, + H5MM_free_t free_func, void *free_info); + #ifdef H5_HAVE_PARALLEL +/** + * \ingroup DXPL + * + * \brief Retrieves the type of chunk optimization that HDF5 actually performed + * on the last parallel I/O call (not necessarily the type requested) + * + * \dxpl_id{plist_id} + * \param[out] actual_chunk_opt_mode The type of chunk optimization performed by HDF5 + * \return \herr_t + * + * \par Motivation: + * A user can request collective I/O via a data transfer property list + * (DXPL) that has been suitably modified with H5Pset_dxpl_mpio(). + * However, HDF5 will sometimes ignore this request and perform independent + * I/O instead. This property allows the user to see what kind of I/O HDF5 + * actually performed. Used in conjunction with H5Pget_mpio_actual_io_mode(), + * this property allows the user to determine exactly what HDF5 did when + * attempting collective I/O. + * + * \details H5Pget_mpio_actual_chunk_opt_mode() retrieves the type of chunk + * optimization performed when collective I/O was requested. This + * property is set before I/O takes place, and will be set even if I/O + * fails. + * + * Valid values returned in \p actual_chunk_opt_mode: + * \snippet this H5D_mpio_actual_chunk_opt_mode_t_snip + * \click4more + * + * \since 1.8.8 + * + */ H5_DLL herr_t H5Pget_mpio_actual_chunk_opt_mode(hid_t plist_id, H5D_mpio_actual_chunk_opt_mode_t *actual_chunk_opt_mode); +/** + * \ingroup DXPL + * + * \brief Retrieves the type of I/O that HDF5 actually performed on the last + * parallel I/O call (not necessarily the type requested) + * + * \dxpl_id{plist_id} + * \param[out] actual_io_mode The type of I/O performed by this process + * \return \herr_t + * + * \par Motivation: + * A user can request collective I/O via a data transfer property list + * (DXPL) that has been suitably modified with H5Pset_dxpl_mpio(). + * However, HDF5 will sometimes ignore this request and perform independent + * I/O instead. This property allows the user to see what kind of I/O HDF5 + * actually performed. Used in conjunction with H5Pget_mpio_actual_chunk_opt_mode(), + * this property allows the user to determine exactly HDF5 did when + * attempting collective I/O. + * + * \details H5Pget_mpio_actual_io_mode() retrieves the type of I/O performed on + * the selection of the current process. This property is set after all + * I/O is completed; if I/O fails, it will not be set. + * + * Valid values returned in \p actual_io_mode: + * \snippet this H5D_mpio_actual_io_mode_t_snip + * \click4more + * + * \attention All processes do not need to have the same value. For example, if + * I/O is being performed using the multi chunk optimization scheme, + * one process's selection may include only chunks accessed + * collectively, while another may include chunks accessed + * independently. In this case, the first process will report + * #H5D_MPIO_CHUNK_COLLECTIVE while the second will report + * #H5D_MPIO_CHUNK_INDEPENDENT. + * + * \see H5Pget_mpio_no_collective_cause(), H5Pget_mpio_actual_chunk_opt_mode() + * + * \since 1.8.8 + * + */ H5_DLL herr_t H5Pget_mpio_actual_io_mode(hid_t plist_id, H5D_mpio_actual_io_mode_t *actual_io_mode); +/** + * \ingroup DXPL + * + * \brief Retrieves local and global causes that broke collective I/O on the last + * parallel I/O call + * + * \dxpl_id{plist_id} + * \param[out] local_no_collective_cause An enumerated set value indicating the + * causes that prevented collective I/O in the local process + * \param[out] global_no_collective_cause An enumerated set value indicating + * the causes across all processes that prevented collective I/O + * \return \herr_t + * + * \par Motivation: + * A user can request collective I/O via a data transfer property list (DXPL) + * that has been suitably modified with H5P_SET_DXPL_MPIO. However, there are + * conditions that can cause HDF5 to forgo collective I/O and perform + * independent I/O. Such causes can be different across the processes of a + * parallel application. This function allows the user to determine what + * caused the HDF5 library to skip collective I/O locally, that is in the + * local process, and globally, across all processes. + * + * \details H5Pget_mpio_no_collective_cause() serves two purposes. It can be + * used to determine whether collective I/O was used for the last + * preceding parallel I/O call. If collective I/O was not used, the + * function retrieves the local and global causes that broke collective + * I/O on that parallel I/O call. The properties retrieved by this + * function are set before I/O takes place and are retained even when + * I/O fails. + * + * Valid values returned in \p local_no_collective_cause and \p + * global_no_collective_cause are as follows or, if there are multiple + * causes, a bitwise OR of the relevant causes; the numbers in the + * center column are the bitmask values: + * \snippet this H5D_mpio_no_collective_cause_t_snip + * \click4more + * + * \attention Each process determines whether it can perform collective I/O and + * broadcasts the result. Those results are combined to make a + * collective decision; collective I/O will be performed only if all + * processes can perform collective I/O.\n + * If collective I/O was not used, the causes that prevented it are + * reported by individual process by means of an enumerated set. The + * causes may differ among processes, so H5Pget_mpio_no_collective_cause() + * returns two property values. The first value is the one produced + * by the local process to report local causes. This local information + * is encoded in an enumeration, the \ref H5D_mpio_no_collective_cause_t + * described above, with all individual causes combined into a single + * enumeration value by means of a bitwise OR operation. The second + * value reports global causes; this global value is the result of a + * bitwise-OR operation across the values returned by all the processes. + * + * \since 1.8.10 + * + */ H5_DLL herr_t H5Pget_mpio_no_collective_cause(hid_t plist_id, uint32_t *local_no_collective_cause, uint32_t *global_no_collective_cause); #endif /* H5_HAVE_PARALLEL */ /* Link creation property list (LCPL) routines */ -H5_DLL herr_t H5Pset_create_intermediate_group(hid_t plist_id, unsigned crt_intmd); +/** + * \ingroup ALCAPL + * + * \brief Determines whether property is set to enable creating missing + * intermediate groups + * + * \lcpl_id{plist_id} + * \param[out] crt_intmd Flag specifying whether to create intermediate + * groups upon creation of an object + * + * \return \herr_t + * + * \details H5Pget_create_intermediate_group() determines whether the link + * creation property list \p plist_id is set to allow functions + * that create objects in groups different from the current + * working group to create intermediate groups that may be + * missing in the path of a new or moved object. + * + * Functions that create objects in or move objects to a group + * other than the current working group make use of this + * property. H5Gcreate_anon() and H5Lmove() are examples of such + * functions. + * + * If \p crt_intmd is positive, missing intermediate groups will + * be created; if \p crt_intmd is non-positive, missing intermediate + * groups will not be created. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pget_create_intermediate_group(hid_t plist_id, unsigned *crt_intmd /*out*/); +/** + * \ingroup ALCAPL + * + * \brief Specifies in property list whether to create missing + * intermediate groups + * + * \lcpl_id{plist_id} + * \param[in] crt_intmd Flag specifying whether to create intermediate + * groups upon the creation of an object + * + * \return \herr_t + * + * \details H5Pset_create_intermediate_group() + * + * \since + * + */ +H5_DLL herr_t H5Pset_create_intermediate_group(hid_t plist_id, unsigned crt_intmd); /* Group creation property list (GCPL) routines */ -H5_DLL herr_t H5Pset_local_heap_size_hint(hid_t plist_id, size_t size_hint); -H5_DLL herr_t H5Pget_local_heap_size_hint(hid_t plist_id, size_t *size_hint /*out*/); -H5_DLL herr_t H5Pset_link_phase_change(hid_t plist_id, unsigned max_compact, unsigned min_dense); + +/** + * \ingroup GCPL + * + * \brief Returns the estimated link count and average link name length in a group + * + * \gcpl_id{plist_id} + * \param[out] est_num_entries The estimated number of links in the group + * referenced by \p plist_id + * \param[out] est_name_len The estimated average length of line names in the group + * referenced by \p plist_id + * \return \herr_t + * + * \details H5Pget_est_link_info() retrieves two settings from the group creation + * property list \p plist_id: the estimated number of links that are + * expected to be inserted into a group created with the property list + * and the estimated average length of those link names. + * + * The estimated number of links is returned in \p est_num_entries. The + * limit for \p est_num_entries is 64 K. + * + * The estimated average length of the anticipated link names is returned + * in \p est_name_len. The limit for \p est_name_len is 64 K. + * + * See \ref_group_impls for a discussion of the available types of HDF5 + * group structures. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_est_link_info(hid_t plist_id, unsigned *est_num_entries /* out */, + unsigned *est_name_len /* out */); +/** + * \ingroup GCPL + * + * \brief Queries whether link creation order is tracked and/or indexed in + * a group + * + * \param[in] plist_id Group or file creation property list + * identifier + * \param[out] crt_order_flags Creation order flag(s) + * + * \return \herr_t + * + * \details H5Pget_link_creation_order() queries the group or file creation + * property list, \p plist_id, and returns a flag indicating whether + * link creation order is tracked and/or indexed in a group. + * + * See H5Pset_link_creation_order() for a list of valid creation + * order flags, as passed in \p crt_order_flags, and their + * meanings. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_link_creation_order(hid_t plist_id, unsigned *crt_order_flags /* out */); +/** + * \ingroup GCPL + * + * \brief Queries the settings for conversion between compact and dense + * groups + * + * \gcpl_id{plist_id} + * \param[out] max_compact Maximum number of links for compact storage + * \param[out] min_dense Minimum number of links for dense storage + * + * \return \herr_t + * + * \details H5Pget_link_phase_change() queries the maximum number of + * entries for a compact group and the minimum number of links + * to require before converting a group to a dense form. + * + * In the compact format, links are stored as messages in the + * group’s header. In the dense format, links are stored in a + * fractal heap and indexed with a version 2 B-tree. + * + * \p max_compact is the maximum number of links to store as + * header messages in the group header before converting the + * group to the dense format. Groups that are in the compact + * format and exceed this number of links are automatically + * converted to the dense format. + * + * \p min_dense is the minimum number of links to store in the + * dense format. Groups which are in dense format and in which + * the number of links falls below this number are automatically + * converted back to the compact format. + * + * In the compact format, links are stored as messages in the + * group’s header. In the dense format, links are stored in a + * fractal heap and indexed with a version 2 B-tree. + * + * See H5Pset_link_phase_change() for a discussion of + * traditional, compact, and dense group storage. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pget_link_phase_change(hid_t plist_id, unsigned *max_compact /*out*/, unsigned *min_dense /*out*/); +/** + * \ingroup GCPL + * + * \brief Retrieves the anticipated size of the local heap for original-style + * groups + * + * \gcpl_id{plist_id} + * \param[out] size_hint Anticipated size of local heap + * \return \herr_t + * + * \details H5Pget_local_heap_size_hint() queries the group creation property + * list, \p plist_id, for the anticipated size of the local heap, \p + * size_hint, for original-style groups, i.e., for groups of the style + * used prior to HDF5 Release 1.8.0. See H5Pset_local_heap_size_hint() + * for further discussion. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_local_heap_size_hint(hid_t plist_id, size_t *size_hint /*out*/); +/** + * \ingroup GCPL + * + * \brief Sets estimated number of links and length of link names in a group + * + * \gcpl_id{plist_id} + * \param[in] est_num_entries Estimated number of links to be inserted into group + * \param[in] est_name_len Estimated average length of link names + * \return \herr_t + * + * \details H5Pset_est_link_info() inserts two settings into the group creation + * property list plist_id: the estimated number of links that are + * expected to be inserted into a group created with the property list + * and the estimated average length of those link names. + * + * The estimated number of links is passed in \p est_num_entries. The + * limit for \p est_num_entries is 64 K. + * + * The estimated average length of the anticipated link names is passed + * in \p est_name_len. The limit for \p est_name_len is 64 K. + * + * The values for these two settings are multiplied to compute the + * initial local heap size (for old-style groups, if the local heap + * size hint is not set) or the initial object header size for + * (new-style compact groups; see \ref_group_impls). Accurately setting + * these parameters will help reduce wasted file space. + * + * If a group is expected to have many links and to be stored in dense + * format, set \p est_num_entries to 0 (zero) for maximum + * efficiency. This will prevent the group from being created in the + * compact format. + * + * See \ref_group_impls for a discussion of the available types of HDF5 + * group structures. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pset_est_link_info(hid_t plist_id, unsigned est_num_entries, unsigned est_name_len); -H5_DLL herr_t H5Pget_est_link_info(hid_t plist_id, unsigned *est_num_entries /* out */, - unsigned *est_name_len /* out */); +/** + * \ingroup GCPL + * + * \brief Sets creation order tracking and indexing for links in a group + * + * \param[in] plist_id Group or file creation property list + * identifier + * \param[out] crt_order_flags Creation order flag(s) + * + * \return \herr_t + * + * \details H5Pset_link_creation_order() sets flags for tracking and + * indexing links on creation order in groups created with the + * group (or file) creation property list \p plist_id. + * + * \p crt_order_flags contains flags with the following meanings: + * + * <table> + * <tr> + * <td>#H5P_CRT_ORDER_TRACKED</td> + * <td>Link creation order is tracked but not necessarily + * indexed</td> + * </tr> + * <tr> + * <td>#H5P_CRT_ORDER_INDEXED</td> + * <td>Link creation order is indexed (requires + * #H5P_CRT_ORDER_TRACKED)</td> + * </tr> + * </table> + * + * The default behavior is that links are tracked and indexed by + * name, and link creation order is neither tracked nor indexed. + * The name is always the primary index for links in a group. + * + * H5Pset_link_creation_order() can be used to set link creation + * order tracking, or to set link creation order tracking and + * indexing. + * + * If (#H5P_CRT_ORDER_TRACKED | #H5P_CRT_ORDER_INDEXED) is + * specified for \p crt_order_flags, then links will be tracked + * and indexed by creation order. The creation order is added as + * a secondary index and enables faster queries and iterations + * by creation order. + * + * If just #H5P_CRT_ORDER_TRACKED is specified for + * \p crt_order_flags, then links will be tracked by creation + * order, but not indexed by creation order. Queries and iterations + * by creation order will work but will be much slower for large + * groups than if #H5P_CRT_ORDER_INDEXED had been included. + * + * \note If a creation order index is to be built, it must be specified in + * the group creation property list. HDF5 currently provides no + * mechanism to turn on link creation order tracking at group + * creation time and to build the index later. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pset_link_creation_order(hid_t plist_id, unsigned crt_order_flags); -H5_DLL herr_t H5Pget_link_creation_order(hid_t plist_id, unsigned *crt_order_flags /* out */); +/** + * \ingroup GCPL + * + * \brief Sets the parameters for conversion between compact and dense + * groups + * + * \gcpl_id{plist_id} + * \param[in] max_compact Maximum number of links for compact storage + * (\a Default: 8) + * \param[in] min_dense Minimum number of links for dense storage + * (\a Default: 6) + * + * \return \herr_t + * + * \details H5Pset_link_phase_change() sets the maximum number of entries + * for a compact group and the minimum number of links to allow + * before converting a dense group back to the compact format. + * + * \p max_compact is the maximum number of links to store as + * header messages in the group header before converting the + * group to the dense format. Groups that are in compact format + * and which exceed this number of links are automatically + * converted to dense format. + * + * \p min_dense is the minimum number of links to store in the + * dense format. Groups which are in dense format and in which + * the number of links falls below this threshold are + * automatically converted to compact format. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_link_phase_change(hid_t plist_id, unsigned max_compact, unsigned min_dense); +/** + * \ingroup GCPL + * + * \brief Specifies the anticipated maximum size of a local heap + * + * \gcpl_id{plist_id} + * \param[in] size_hint Anticipated maximum size in bytes of local heap + * \return \herr_t + * + * \details H5Pset_local_heap_size_hint() is used with original-style HDF5 + * groups (see “Motivation” below) to specify the anticipated maximum + * local heap size, size_hint, for groups created with the group + * creation property list \p plist_id. The HDF5 library then uses \p + * size_hint to allocate contiguous local heap space in the file for + * each group created with \p plist_id. + * + * For groups with many members or very few members, an appropriate + * initial value of \p size_hint would be the anticipated number of + * group members times the average length of group member names, plus a + * small margin: + * \code + * size_hint = max_number_of_group_members * + * (average_length_of_group_member_link_names + 2) + * \endcode + * If it is known that there will be groups with zero members, the use + * of a group creation property list with \p size_hint set to to 1 (one) + * will guarantee the smallest possible local heap for each of those groups. + * + * Setting \p size_hint to zero (0) causes the library to make a + * reasonable estimate for the default local heap size. + * + * \par Motivation: + * In situations where backward-compatibility is required, specifically, when + * libraries prior to HDF5 Release 1.8.0 may be used to read the file, groups + * must be created and maintained in the original style. This is HDF5’s default + * behavior. If backward compatibility with pre-1.8.0 libraries is not a concern, + * greater efficiencies can be obtained with the new-format compact and indexed + * groups. See <a href="https://portal.hdfgroup.org/display/HDF5/Groups">Group + * implementations in HDF5</a> in the \ref H5G API introduction (at the bottom).\n + * H5Pset_local_heap_size_hint() is useful for tuning file size when files + * contain original-style groups with either zero members or very large + * numbers of members.\n + * The original style of HDF5 groups, the only style available prior to HDF5 + * Release 1.8.0, was well-suited for moderate-sized groups but was not optimized + * for either very small or very large groups. This original style remains the + * default, but two new group implementations were introduced in HDF5 Release 1.8.0: + * compact groups to accommodate zero to small numbers of members and indexed groups + * for thousands or tens of thousands of members ... or millions, if that's what + * your application requires.\n + * The local heap size hint, \p size_hint, is a performance tuning parameter for + * original-style groups. As indicated above, an HDF5 group may have zero, a handful, + * or tens of thousands of members. Since the original style of HDF5 groups stores the + * metadata for all of these group members in a uniform format in a local heap, the size + * of that metadata (and hence, the size of the local heap) can vary wildly from group + * to group. To intelligently allocate space and to avoid unnecessary fragmentation of + * the local heap, it can be valuable to provide the library with a hint as to the local + * heap’s likely eventual size. This can be particularly valuable when it is known that + * a group will eventually have a great many members. It can also be useful in conserving + * space in a file when it is known that certain groups will never have any members. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_local_heap_size_hint(hid_t plist_id, size_t size_hint); /* String creation property list (STRCPL) routines */ -H5_DLL herr_t H5Pset_char_encoding(hid_t plist_id, H5T_cset_t encoding); +/** + * \ingroup ALCAPL + * + * \brief Retrieves the character encoding used to create a link or + * attribute name + * + * \param[in] plist_id Link creation or attribute creation property list + * identifier + * \param[out] encoding String encoding character set + * + * \return \herr_t + * + * \details H5Pget_char_encoding() retrieves the character encoding used + * to encode link or attribute names that are created with the + * property list \p plist_id. + * + * Valid values for \p encoding are defined in H5Tpublic.h and + * include the following: + * + * \csets + * + * \note H5Pget_char_encoding() retrieves the character set used for an + * HDF5 link or attribute name while H5Tget_cset() retrieves the + * character set used in a character or string datatype. + * + * \since 1.8.0 + * + */ H5_DLL herr_t H5Pget_char_encoding(hid_t plist_id, H5T_cset_t *encoding /*out*/); +/** + * \ingroup ALCAPL + * + * \brief Sets the character encoding used to encode link and attribute + * names + * + * \param[in] plist_id Link creation or attribute creation property list + * identifier + * \param[in] encoding String encoding character set + * + * \return \herr_t + * + * \details H5Pset_char_encoding() sets the character encoding used for + * the names of links (which provide the names by which objects + * are referenced) or attributes created with the property list + * \p plist_id. + * + * Valid values for encoding include the following: + * \csets + * \details For example, if the character set for the property list + * \p plist_id is set to #H5T_CSET_UTF8, link names pointing to + * objects created with the link creation property list + * \p plist_id will be encoded using the UTF-8 character set. + * Similarly, names of attributes created with the attribute + * creation property list \p plist_id will be encoded as UTF-8. + * + * ASCII and UTF-8 Unicode are the only currently supported + * character encodings. Extended ASCII encodings (for example, + * ISO 8859) are not supported. This encoding policy is not + * enforced by the HDF5 library. Using encodings other than + * ASCII and UTF-8 can lead to compatibility and usability + * problems. + * + * \note H5Pset_char_encoding() sets the character set used for an + * HDF5 link or attribute name while H5Tset_cset() sets the + * character set used in a character or string datatype. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_char_encoding(hid_t plist_id, H5T_cset_t encoding); /* Link access property list (LAPL) routines */ -H5_DLL herr_t H5Pset_nlinks(hid_t plist_id, size_t nlinks); -H5_DLL herr_t H5Pget_nlinks(hid_t plist_id, size_t *nlinks); -H5_DLL herr_t H5Pset_elink_prefix(hid_t plist_id, const char *prefix); +/** + * \ingroup LAPL + * + * \brief Retrieves the external link traversal file access flag from the + * specified link access property list + * + * \lapl_id + * \param[out] flags File access flag for link traversal + * + * \return \herr_t + * + * \details H5Pget_elink_acc_flags() retrieves the file access flag used + * to open an external link target file from the specified link + * access property list. + * + * Valid values for \p flags include: + * \li #H5F_ACC_RDWR - Files opened through external links will + * be opened with write access + * \li #H5F_ACC_RDONLY - Files opened through external links will + * be opened with read-only access + * \li #H5F_ACC_DEFAULT - Files opened through external links will + * be opened with the same access flag as + * the parent file + * + * The value returned, if it is not #H5F_ACC_DEFAULT, will + * override the default access flag, which is the access flag + * used to open the parent file. + * + * <b>Example Usage:</b> + * The following code retrieves the external link access flag + * settings on the link access property list \p lapl_id into a + * local variable: + * <pre> + * unsigned acc_flags; + * status = H5Pget_elink_acc_flags(lapl_id, &acc_flags); + * </pre> + * + * \since 1.8.3 + * + */ +H5_DLL herr_t H5Pget_elink_acc_flags(hid_t lapl_id, unsigned *flags); +/** + * \ingroup LAPL + * + * \brief Retrieves the external link traversal callback function from the + * specified link access property list + * + * \lapl_id + * \param[out] func User-defined external link traversal callback + * function + * \param[out] op_data User-defined input data for the callback function + * + * \return \herr_t + * + * \details H5Pget_elink_cb() retrieves the user-defined external link + * traversal callback function defined in the specified link + * access property list. + * + * The callback function may adjust the file access property + * list and file access flag to use when opening a file through + * an external link. The callback will be executed by the HDF5 + * library immediately before opening the target file. + * + * <b>Failure Modes:</b> H5Pget_elink_cb() will fail if the link + * access property list identifier, \p lapl_id, is invalid. + * + * An invalid function pointer or data pointer, \p func or + * \p op_data respectively, may cause a segmentation fault or an + * invalid memory access. + * + * <b>Example Usage:</b> The following code retrieves the external + * link callback settings on the link access property list + * \p lapl_id into local variables: + * <pre> + * H5L_elink_traverse_t elink_callback_func; + * void *elink_callback_udata; + * status = H5Pget_elink_cb (lapl_id, &elink_callback_func, + * &elink_callback_udata); + * </pre> + * + * \since 1.8.3 + * + */ +H5_DLL herr_t H5Pget_elink_cb(hid_t lapl_id, H5L_elink_traverse_t *func, void **op_data); +/** + * \ingroup LAPL + * + * \brief Retrieves the file access property list identifier associated + * with the link access property list + * + * \lapl_id + * + * \return \hid_t{file access property list} + * + * \details H5Pget_elink_fapl() retrieves the file access property list + * identifier that is set for the link access property list + * identifier, \p lapl_id. The library uses this file access + * property list identifier to open the target file for the + * external link access. When no such identifier is set, this + * routine returns #H5P_DEFAULT. + * + * \see H5Pset_elink_fapl() and H5Lcreate_external(). + * + * \since 1.8.0 + * + */ +H5_DLL hid_t H5Pget_elink_fapl(hid_t lapl_id); +/** + * \ingroup LAPL + * + * \brief Retrieves prefix applied to external link paths + * + * \lapl_id{plist_id} + * \param[out] prefix Prefix applied to external link paths + * \param[in] size Size of prefix, including null terminator + * + * \return If successful, returns a non-negative value specifying the size + * in bytes of the prefix without the NULL terminator; otherwise + * returns a negative value. + * + * \details H5Pget_elink_prefix() retrieves the prefix applied to the + * path of any external links traversed. + * + * When an external link is traversed, the prefix is retrieved + * from the link access property list \p plist_id, returned in + * the user-allocated buffer pointed to by \p prefix, and + * prepended to the filename stored in the external link. + * + * The size in bytes of the prefix, including the NULL terminator, + * is specified in \p size. If size is unknown, a preliminary + * H5Pget_elink_prefix() call with the pointer \p prefix set to + * NULL will return the size of the prefix without the NULL + * terminator. + * + * \since 1.8.0 + * + */ H5_DLL ssize_t H5Pget_elink_prefix(hid_t plist_id, char *prefix, size_t size); -H5_DLL hid_t H5Pget_elink_fapl(hid_t lapl_id); -H5_DLL herr_t H5Pset_elink_fapl(hid_t lapl_id, hid_t fapl_id); -H5_DLL herr_t H5Pset_elink_acc_flags(hid_t lapl_id, unsigned flags); -H5_DLL herr_t H5Pget_elink_acc_flags(hid_t lapl_id, unsigned *flags); -H5_DLL herr_t H5Pset_elink_cb(hid_t lapl_id, H5L_elink_traverse_t func, void *op_data); -H5_DLL herr_t H5Pget_elink_cb(hid_t lapl_id, H5L_elink_traverse_t *func, void **op_data); +/** + * \ingroup LAPL + * + * \brief Retrieves the maximum number of link traversals + * + * \lapl_id{plist_id} + * \param[out] nlinks Maximum number of links to traverse + * + * \return \herr_t + * + * \details H5Pget_nlinks() retrieves the maximum number of soft or + * user-defined link traversals allowed, \p nlinks, before the + * library assumes it has found a cycle and aborts the traversal. + * This value is retrieved from the link access property list + * \p plist_id. + * + * The limit on the number of soft or user-defined link traversals + * is designed to terminate link traversal if one or more links + * form a cycle. User control is provided because some files may + * have legitimate paths formed of large numbers of soft or + * user-defined links. This property can be used to allow + * traversal of as many links as desired. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_nlinks(hid_t plist_id, size_t *nlinks); +/** + * \ingroup LAPL + * + * \brief Sets the external link traversal file access flag in a link + * access property list + * + * \lapl_id + * \param[in] flags The access flag for external link traversal + * + * \return \herr_t + * + * \details H5Pset_elink_acc_flags() specifies the file access flag to use + * to open the target file of an external link. This allows + * read-only access of files reached through an external link in + * a file opened with write access, or vice-versa. + * + * Valid values for \p flags include: + * \li #H5F_ACC_RDWR - Causes files opened through external links + * to be opened with write access + * \li #H5F_ACC_RDONLY - Causes files opened through external + * links to be opened with read-only access + * \li #H5F_ACC_DEFAULT - Removes any external link file access + * flag setting from \p lapl_id, causing the file access flag + * setting to be taken from the parent file + * + * The library will normally use the file access flag used to + * open the parent file as the file access flag for the target + * file. This function provides a way to override that behavior. + * The external link traversal callback function set by + * H5Pset_elink_cb() can override the setting from + * H5Pset_elink_acc_flags(). + * + * <b>Motivation:</b> H5Pset_elink_acc_flags() is used to adjust the + * file access flag used to open files reached through external links. + * This may be useful to, for example, prevent modifying files + * accessed through an external link. Otherwise, the target file is + * opened with whatever flag was used to open the parent. + * + * <b>Example Usage:</b> The following code sets the link access + * property list \p lapl_id to open external link target files with + * read-only access: + * <pre> + * status = H5Pset_elink_acc_flags(lapl_id, H5F_ACC_RDONLY); + * </pre> + * + * \since 1.8.3 + * + */ +H5_DLL herr_t H5Pset_elink_acc_flags(hid_t lapl_id, unsigned flags); +/** + * \ingroup LAPL + * + * \brief Sets the external link traversal callback function in a link + * access property list + * + * \lapl_id + * \param[in] func User-defined external link traversal callback + * function + * \param[in] op_data User-defined input data for the callback function + * + * \return \herr_t + * + * \details H5Pset_elink_cb() sets a user-defined external link traversal + * callback function in the link access property list \p lapl_id. + * The callback function \p func must conform to the prototype + * specified in #H5L_elink_traverse_t. + * + * The callback function may adjust the file access property + * list and file access flags to use when opening a file through + * an external link. The callback will be executed by the HDF5 + * library immediately before opening the target file. + * + * The callback will be made after the file access property list + * set by H5Pset_elink_fapl() and the file access flag set by + * H5Pset_elink_acc_flags() are applied, so changes made by this + * callback function will take precedence. + * + * \attention A file close degree property setting (H5Pset_fclose_degree()) + * in this callback function or an associated property list will + * be ignored. A file opened by means of traversing an external + * link is always opened with the weak file close degree + * property setting, #H5F_CLOSE_WEAK. + * + * <b>Motivation:</b> H5Pset_elink_cb() is used to specify a + * callback function that is executed by the HDF5 library when + * traversing an external link. This provides a mechanism to set + * specific access permissions, modify the file access property + * list, modify the parent or target file, or take any other + * user-defined action. This callback function is used in + * situations where the HDF5 library's default behavior is not + * suitable. + * + * <b>Failure Modes:</b> H5Pset_elink_cb() will fail if the link + * access property list identifier, \p lapl_id, is invalid or if + * the function pointer, \p func, is NULL. + * + * An invalid function pointer, \p func, will cause a segmentation + * fault or other failure when an attempt is subsequently made to + * traverse an external link. + * + * <b>Example Usage:</b> + * This example defines a callback function that prints the name + * of the target file every time an external link is followed, and + * sets this callback function on \p lapl_id. + * <pre> + * herr_t elink_callback(const char *parent_file_name, const char + * *parent_group_name, const char *child_file_name, const char + * *child_object_name, unsigned *acc_flags, hid_t fapl_id, void *op_data) { + * puts(child_file_name); + * return 0; + * } + * int main(void) { + * hid_t lapl_id = H5Pcreate(H5P_LINK_ACCESS); + * H5Pset_elink_cb(lapl_id, elink_callback, NULL); + * ... + * } + * </pre> + * + * + * \since 1.8.3 + * + */ +H5_DLL herr_t H5Pset_elink_cb(hid_t lapl_id, H5L_elink_traverse_t func, void *op_data); +/** + * \ingroup LAPL + * + * \brief Sets a file access property list for use in accessing a file + * pointed to by an external link + * + * \lapl_id + * \fapl_id + * + * \return \herr_t + * + * \details H5Pset_elink_fapl() sets the file access property list, + * \p fapl_id, to be used when accessing the target file of an + * external link associated with \p lapl_id. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_elink_fapl(hid_t lapl_id, hid_t fapl_id); +/** + * \ingroup LAPL + * + * \brief Sets prefix to be applied to external link paths + * + * \lapl_id{plist_id} + * \param[in] prefix Prefix to be applied to external link paths + * + * \return \herr_t + * + * \details H5Pset_elink_prefix() sets the prefix to be applied to the + * path of any external links traversed. The prefix is prepended + * to the filename stored in the external link. + * + * The prefix is specified in the user-allocated buffer \p prefix + * and set in the link access property list \p plist_id. The buffer + * should not be freed until the property list has been closed. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_elink_prefix(hid_t plist_id, const char *prefix); +/** + * \ingroup LAPL + * + * \brief Sets maximum number of soft or user-defined link traversals + * + * \lapl_id{plist_id} + * \param[in] nlinks Maximum number of links to traverse + * + * \return \herr_t + * + * \details H5Pset_nlinks() sets the maximum number of soft or user-defined + * link traversals allowed, \p nlinks, before the library assumes + * it has found a cycle and aborts the traversal. This value is + * set in the link access property list \p plist_id. + * + * The limit on the number of soft or user-defined link traversals + * is designed to terminate link traversal if one or more links + * form a cycle. User control is provided because some files may + * have legitimate paths formed of large numbers of soft or + * user-defined links. This property can be used to allow + * traversal of as many links as desired. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_nlinks(hid_t plist_id, size_t nlinks); /* Object copy property list (OCPYPL) routines */ -H5_DLL herr_t H5Pset_copy_object(hid_t plist_id, unsigned crt_intmd); -H5_DLL herr_t H5Pget_copy_object(hid_t plist_id, unsigned *crt_intmd /*out*/); +/** + * \ingroup OCPPL + * + * \brief Adds a path to the list of paths that will be searched in the + * destination file for a matching committed datatype + * + * \param[in] plist_id Object copy property list identifier + * \param[in] path The path to be added + * + * \return \herr_t + * + * \details H5Padd_merge_committed_dtype_path() adds a path, \p path, + * which points to a committed datatype, to the current list of + * suggested paths stored in the object copy property list + * \p plist_id. The search as described in the next paragraph is + * effective only if the #H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG is + * enabled in the object copy property list via + * H5Pset_copy_object(). + * + * When copying a committed datatype, a dataset with a committed + * datatype, or an object with an attribute of a committed + * datatype, the default behavior of H5Ocopy() is to search for + * a matching committed datatype: + * <ol> + * <li> First search the list of suggested paths in the object + * copy property list.</li> + * <li> Then, if no match has been found, search all the committed + * datatypes in the destination file. + * </ol> + * The default Step 2 in this search process can be changed by + * setting a callback function (see H5Pset_mcdt_search_cb()). + * + * Two datatypes are determined equal if their descriptions are + * identical, in a manner similar to H5Tequal(). If either + * committed datatype has one or more attributes, then all + * attributes must be present in both committed datatypes and they + * must be identical. Two attributes are considered identical if + * their datatype description, dataspace, and raw data values are + * the same. However, if an attribute uses a committed datatype, + * that committed datatype’s attributes will not be compared. + * + * If a match is found, H5Ocopy() will perform the following in + * the destination file: + * \li For a committed datatype, the library will create a hard + * link to the found datatype. + * \li For a dataset that uses a committed datatype, the library + * will modify the copied dataset to use the found committed + * datatype as its datatype. + * \li For an object with an attribute of a committed datatype, + * the library will modify the copied object’s attribute to + * use the found committed datatype as its datatype. + * + * If no match is found, H5Ocopy() will perform the following in + * the destination file: + * \li For a committed datatype, the library will copy it as it + * would any other object, creating a named committed + * datatype at the destination. That is, the library will + * create a committed datatype that is accessible in the + * file by a unique path. + * \li For a dataset that uses a committed datatype, the + * library will copy the datatype as an anonymous + * committed datatype and use that as the dataset’s + * datatype. + * \li For an object with an attribute of a committed datatype, + * the library will copy the datatype as an anonymous + * committed datatype and use that as the attribute’s + * datatype. + * + * \b Motivation: H5Padd_merge_committed_dtype_path() provides a + * means to override the default behavior of H5Ocopy() when + * #H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG is set in an object + * copy property list. + * H5Padd_merge_committed_dtype_path() is the mechanism for + * suggesting search paths where H5Ocopy() will look for a + * matching committed datatype. This can be substantially + * faster than the default approach of searching the entire + * destination file for a match. + * + * \b Example \b Usage: This example adds two paths to the object + * copy property list. H5Ocopy() will search the two suggested + * paths for a match before searching all the committed datatypes + * in the destination file. + * + * <pre> + * int main(void) { + * hid_t ocpypl_id = H5Pcreate(H5P_OBJECT_COPY); + * + * H5Pset_copy_object(ocpypl_id, H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG); + * H5Padd_merge_committed_dtype_path(ocpypl_id, "/group/committed_dtypeA"); + * H5Padd_merge_committed_dtype_path(ocpypl_id, "/group2/committed_dset"); + * H5Ocopy(...ocpypl_id...); + * ... + * ... + * } + * </pre> + * + * \note H5Padd_merge_committed_dtype_path() will fail if the object + * copy property list is invalid. + * It will also fail if there is insufficient memory when + * duplicating \p path. + * + * \see + * \li H5Ocopy() + * \li #H5O_mcdt_search_cb_t + * \li H5Padd_merge_committed_dtype_path() + * \li H5Pfree_merge_committed_dtype_paths() + * \li H5Pget_mcdt_search_cb() + * \li H5Pset_copy_object() + * \li H5Pset_mcdt_search_cb() + * \li \ref_h5ocopy + * + * \since 1.8.9 + * + */ H5_DLL herr_t H5Padd_merge_committed_dtype_path(hid_t plist_id, const char *path); +/** + * \ingroup OCPPL + * + * \brief Clears the list of paths stored in the object copy property list + * + * \param[in] plist_id Object copy property list identifier + * + * \return \herr_t + * + * \details H5Pfree_merge_committed_dtype_paths() clears the suggested + * paths stored in the object copy property list \p plist_id. + * These are the suggested paths previously set with + * H5Padd_merge_committed_dtype_path(). + * + * \b Example \b Usage: This example adds a suggested path to the + * object copy property list, does the copy, clears the list, and + * then adds a new suggested path to the list for another copy. + * + * <pre> + * int main(void) { + * hid_t ocpypl_id = H5Pcreate(H5P_OBJECT_COPY); + * + * H5Pset_copy_object(ocpypl_id, H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG); + * H5Padd_merge_committed_dtype_path(ocpypl_id, "/group/committed_dtypeA"); + * H5Ocopy(...ocpypl_id...); + * ... + * ... + * H5Pfree_merge_committed_dtype_paths(ocpypl_id); + * H5Padd_merge_committed_dtype_path(ocpypl_id, "/group2/committed_dtypeB"); + * H5Ocopy(...ocpypl_id...); + * ... + * ... + * } + * </pre> + * + * \note H5Pfree_merge_committed_dtype_paths() will fail if the + * object copy property list is invalid. + * + * \see + * \li H5Ocopy() + * \li #H5O_mcdt_search_cb_t + * \li H5Padd_merge_committed_dtype_path() + * \li H5Pfree_merge_committed_dtype_paths() + * \li H5Pget_mcdt_search_cb() + * \li H5Pset_copy_object() + * \li H5Pset_mcdt_search_cb() + * + * \since 1.8.9 + * + */ H5_DLL herr_t H5Pfree_merge_committed_dtype_paths(hid_t plist_id); -H5_DLL herr_t H5Pset_mcdt_search_cb(hid_t plist_id, H5O_mcdt_search_cb_t func, void *op_data); +/** + * \ingroup OCPPL + * + * \brief Retrieves the properties to be used when an object is copied + * + * \param[in] plist_id Object copy property list identifier + * \param[out] copy_options Copy option(s) set in the object copy property + * list + * + * \return \herr_t + * + * \details H5Pget_copy_object() retrieves the properties currently + * specified in the object copy property list \p plist_id, which + * will be invoked when a new copy is made of an existing object. + * + * \p copy_options is a bit map indicating the flags, or + * properties, governing object copying that are set in the + * property list \p plist_id. + * + * The available flags are described in H5Pset_copy_object(). + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pget_copy_object(hid_t plist_id, unsigned *copy_options /*out*/); +/** + * \ingroup OCPPL + * + * \brief Retrieves the callback function from the specified object copy + * property list + * + * \param[in] plist_id Object copy property list identifier + * \param[out] func User-defined callback function + * \param[out] op_data User-defined data for the callback + * function + * + * \return \herr_t + * + * \details H5Pget_mcdt_search_cb() retrieves the user-defined callback + * function and the user data that are set via + * H5Pset_mcdt_search_cb() in the object copy property list + * \p plist_id. + * + * The callback function will be returned in the parameter \p func + * and the user data will be returned in the parameter \p op_data. + * + * \note H5Pget_mcdt_search_cb() will fail if the object copy property + * list is invalid. + * + * \see + * \li H5Ocopy() + * \li #H5O_mcdt_search_cb_t + * \li H5Padd_merge_committed_dtype_path() + * \li H5Pfree_merge_committed_dtype_paths() + * \li H5Pget_mcdt_search_cb() + * \li H5Pset_copy_object() + * \li H5Pset_mcdt_search_cb() + * \li \ref_h5ocopy + * + * \since 1.8.9 + * + */ H5_DLL herr_t H5Pget_mcdt_search_cb(hid_t plist_id, H5O_mcdt_search_cb_t *func, void **op_data); +/** + * \ingroup OCPPL + * + * \brief Sets properties to be used when an object is copied + * + * \param[in] plist_id Object copy property list identifier + * \param[out] copy_options Copy option(s) to be set + * + * \return \herr_t + * + * \details H5Pset_copy_object() sets properties in the object copy + * property list \p plist_id. When an existing object is copied, + * that property list will determine how the new copy is created. + * + * The following flags are available for use in an object copy + * property list: + * + * <table> + * <tr> + * <td>#H5O_COPY_SHALLOW_HIERARCHY_FLAG</td> + * <td>Copy only immediate members of a group<br /> + * <em>Default behavior, without flag:</em> Recursively + * copy all objects in and below the group.</td> + * </tr> + * <tr> + * <td>#H5O_COPY_EXPAND_SOFT_LINK_FLAG</td> + * <td>Expand soft links into new objects<br /> + * <em>Default behavior, without flag:</em> Copy soft + * links as they are.</td> + * </tr> + * <tr> + * <td>#H5O_COPY_EXPAND_EXT_LINK_FLAG</td> + * <td>Expand external link into new objects<br /> + * <em>Default behavior, without flag:</em> Copy external + * links as they are.</td> + * </tr> + * <tr> + * <td>#H5O_COPY_EXPAND_REFERENCE_FLAG</td> + * <td>Copy objects that are pointed to by references and + * update reference values in destination file<br /> + * <em>Default behavior, without flag:</em> Set reference + * values in destination file to zero (0)</td> + * </tr> + * <tr> + * <td>#H5O_COPY_WITHOUT_ATTR_FLAG</td> + * <td>Copy object without copying attributes<br /> + * <em>Default behavior, without flag:</em> Copy object + * with all its attributes</td> + * </tr> + * <tr> + * <td>#H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG</td> + * <td>Use a matching committed datatype in the destination + * file when copying a committed datatype, a dataset with + * a committed datatype, or an object with an attribute + * of committed datatype <br /> + * <em>Default behavior without flag:</em> + * + * \li A committed datatype in the source will be copied to + * the destination as a committed datatype. + * \li If a dataset in the source uses a committed + * datatype or an object in the source has an attribute + * of a committed datatype, that committed datatype will + * be written to the destination as an anonymous + * committed datatype. + * If copied in a single H5Ocopy() operation, objects + * that share a committed datatype in the source will + * share an anonymous committed dataype in the + * destination copy. Subsequent H5Ocopy() operations, + * however, will be unaware of prior anonymous committed + * dataypes and will create new ones. + * + * See the “See Also” section immediately below for + * functions related to the use of this flag.</td> + * </tr> + * </table> + * + * \see + * Functions and a callback function used to tune committed datatype + * copying behavior: + * \li #H5O_mcdt_search_cb_t + * \li H5Padd_merge_committed_dtype_path() + * \li H5Pfree_merge_committed_dtype_paths() + * \li H5Pget_mcdt_search_cb() + * \li H5Pset_copy_object() + * \li H5Pset_mcdt_search_cb() + * \li \ref_h5ocopy + * + * \version 1.8.9 #H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG added in this release. + * + * \since 1.8.0 + * + */ +H5_DLL herr_t H5Pset_copy_object(hid_t plist_id, unsigned copy_options); +/** + * \ingroup OCPPL + * + * \brief Sets the callback function that H5Ocopy() will invoke before + * searching the entire destination file for a matching committed + * datatype + * + * \param[in] plist_id Object copy property list identifier + * \param[in] func User-defined callback function + * \param[in] op_data User-defined input data for the callback function + * + * \return \herr_t + * + * \details H5Pset_mcdt_search_cb() allows an application to set a + * callback function, \p func, that will be invoked before + * searching the destination file for a matching committed + * datatype. The default, global search process is described in + * H5Padd_merge_committed_dtype_path(). + * + * The callback function must conform to the #H5O_mcdt_search_cb_t + * prototype and will return an instruction for one of the + * following actions: + * + * \li Continue the search for a matching committed datatype in + * the destination file. + * \li Discontinue the search for a matching committed datatype. + * H5Ocopy() will then apply the default behavior of creating + * an anonymous committed datatype. + * \li Abort the copy operation and exit H5Ocopy(). + * + * \b Motivation: H5Pset_mcdt_search_cb() provides the means to + * define a callback function. An application can then use that + * callback to take an additional action before the default search + * of all committed datatypes in the destination file or to take an + * action that replaces the default search. This mechanism is + * intended to improve performance when the global search might + * take a long time. + * + * \b Example \b Usage: This example defines a callback function in + * the object copy property list. + * + * <pre> + * static H5O_mcdt_search_ret_t + * mcdt_search_cb(void *_udata) + * { + * H5O_mcdt_search_ret_t action = *((H5O_mcdt_search_ret_t *)_udata); + * + * return(action); + * } + * + * int main(void) { + * hid_t ocpypl_id = H5Pcreate(H5P_OBJECT_COPY); + * + * H5Pset_copy_object(ocpypl_id, H5O_COPY_MERGE_COMMITTED_DTYPE_FLAG); + * H5Padd_merge_committed_dtype_path(ocpypl_id, "/group/committed_dtypeA"); + * + * action = H5O_MCDT_SEARCH_STOP; + * H5Pset_mcdt_search_cb(ocpypl_id, mcdt_search_cb, &action); + * H5Ocopy(...ocpypl_id...); + * ... + * ... + * } + * </pre> + * + * \note H5Pset_mcdt_search_cb() will fail if the + * object copy property list is invalid. + * + * \warning If the callback function return value causes H5Ocopy() to + * abort, the destination file may be left in an inconsistent or + * corrupted state. + * + * \see + * \li H5Ocopy() + * \li #H5O_mcdt_search_cb_t + * \li H5Padd_merge_committed_dtype_path() + * \li H5Pfree_merge_committed_dtype_paths() + * \li H5Pget_mcdt_search_cb() + * \li H5Pset_copy_object() + * \li H5Pset_mcdt_search_cb() + * \li \ref_h5ocopy + * + * \since 1.8.9 + * + */ +H5_DLL herr_t H5Pset_mcdt_search_cb(hid_t plist_id, H5O_mcdt_search_cb_t func, void *op_data); /* Symbols defined for compatibility with previous versions of the HDF5 API. * @@ -485,26 +9112,429 @@ H5_DLL herr_t H5Pget_mcdt_search_cb(hid_t plist_id, H5O_mcdt_search_cb_t *func, #define H5P_NO_CLASS H5P_ROOT /* Typedefs */ +/** + * \ingroup GPLOA + * + * \brief Registers a permanent property with a property list class + * + * \plistcls_id{cls_id} + * \param[in] name Name of property to register + * \param[in] size Size of property in bytes + * \param[in] def_value Default value for property in newly created + * property lists + * \param[in] prp_create Callback routine called when a property list is + * being created and the property value will be + * initialized + * \param[in] prp_set Callback routine called before a new value is + * copied into the property's value + * \param[in] prp_get Callback routine called when a property value is + * retrieved from the property + * \param[in] prp_del Callback routine called when a property is deleted + * from a property list + * \param[in] prp_copy Callback routine called when a property is copied + * from a property list + * \param[in] prp_close Callback routine called when a property list is + * being closed and the property value will be + * disposed of + * + * \return \herr_t + * + * \deprecated As of HDF5-1.8 this function was deprecated in favor of + * H5Pregister2() or the macro H5Pregister(). + * + * \details H5Pregister1() registers a new property with a property list + * class. The property will exist in all property list objects + * of that class after this routine is finished. The name of + * the property must not already exist. The default property + * value must be provided and all new property lists created + * with this property will have the property value set to the + * default provided. Any of the callback routines may be set + * to NULL if they are not needed. + * + * Zero-sized properties are allowed and do not store any data in + * the property list. These may be used as flags to indicate the + * presence or absence of a particular piece of information. The + * default pointer for a zero-sized property may be set to NULL. + * The property \p prp_create and \p prp_close callbacks are called for + * zero-sized properties, but the \p prp_set and \p prp_get callbacks + * are never called. + * + * The \p prp_create routine is called when a new property list with + * this property is being created. The #H5P_prp_create_func_t + * callback function is defined as #H5P_prp_cb1_t. + * + * The \p prp_create routine may modify the value to be set and those + * changes will be stored as the initial value of the property. + * If the \p prp_create routine returns a negative value, the new + * property value is not copied into the property and the + * \p prp_create routine returns an error value. + * + * The \p prp_set routine is called before a new value is copied into + * the property. The #H5P_prp_set_func_t callback function is defined + * as #H5P_prp_cb2_t. + * + * The \p prp_set routine may modify the value pointer to be set and + * those changes will be used when setting the property's value. + * If the \p prp_set routine returns a negative value, the new property + * value is not copied into the property and the \p prp_set routine + * returns an error value. The \p prp_set routine will not be called + * for the initial value; only the \p prp_create routine will be + * called. + * + * \b Note: The \p prp_set callback function may be useful to range + * check the value being set for the property or may perform some + * transformation or translation of the value set. The \p prp_get + * callback would then reverse the transformation or translation. + * A single \p prp_get or \p prp_set callback could handle multiple + * properties by performing different actions based on the property + * name or other properties in the property list. + * + * The \p prp_get routine is called when a value is retrieved from a + * property value. The #H5P_prp_get_func_t callback function is + * defined as #H5P_prp_cb2_t. + * + * The \p prp_get routine may modify the value to be returned from the + * query and those changes will be returned to the calling routine. + * If the \p prp_set routine returns a negative value, the query + * routine returns an error value. + * + * The \p prp_del routine is called when a property is being + * deleted from a property list. The #H5P_prp_delete_func_t + * callback function is defined as #H5P_prp_cb2_t. + * + * The \p prp_del routine may modify the value passed in, but the + * value is not used by the library when the \p prp_del routine + * returns. If the \p prp_del routine returns a negative value, + * the property list deletion routine returns an error value but + * the property is still deleted. + * + * The \p prp_copy routine is called when a new property list with + * this property is being created through a \p prp_copy operation. + * The #H5P_prp_copy_func_t callback function is defined as + * #H5P_prp_cb1_t. + * + * The \p prp_copy routine may modify the value to be set and those + * changes will be stored as the new value of the property. If + * the \p prp_copy routine returns a negative value, the new + * property value is not copied into the property and the \p prp_copy + * routine returns an error value. + * + * The \p prp_close routine is called when a property list with this + * property is being closed. The #H5P_prp_close_func_t callback + * function is defined as #H5P_prp_cb1_t. + * + * The \p prp_close routine may modify the value passed in, but the + * value is not used by the library when the \p prp_close routine + * returns. If the \p prp_close routine returns a negative value, the + * property list close routine returns an error value but the property + * list is still closed. + * + * The #H5P_prp_cb1_t is as follows: + * \snippet this H5P_prp_cb1_t_snip + * + * The #H5P_prp_cb2_t is as follows: + * \snippet this H5P_prp_cb2_t_snip + * + * + * \cpp_c_api_note + * + */ /* Function prototypes */ -H5_DLL herr_t H5Pregister1(hid_t cls_id, const char *name, size_t size, void *def_value, - H5P_prp_create_func_t prp_create, H5P_prp_set_func_t prp_set, - H5P_prp_get_func_t prp_get, H5P_prp_delete_func_t prp_del, - H5P_prp_copy_func_t prp_copy, H5P_prp_close_func_t prp_close); -H5_DLL herr_t H5Pinsert1(hid_t plist_id, const char *name, size_t size, void *value, - H5P_prp_set_func_t prp_set, H5P_prp_get_func_t prp_get, - H5P_prp_delete_func_t prp_delete, H5P_prp_copy_func_t prp_copy, - H5P_prp_close_func_t prp_close); +H5_DLL herr_t H5Pregister1(hid_t cls_id, const char *name, size_t size, void *def_value, + H5P_prp_create_func_t prp_create, H5P_prp_set_func_t prp_set, + H5P_prp_get_func_t prp_get, H5P_prp_delete_func_t prp_del, + H5P_prp_copy_func_t prp_copy, H5P_prp_close_func_t prp_close); +/** + * \ingroup GPLOA + * + * \brief Registers a temporary property with a property list + * + * \plist_id + * \param[in] name Name of property to create + * \param[in] size Size of property in bytes + * \param[in] value Initial value for the property + * \param[in] prp_set Callback routine called before a new value is copied + * into the property's value + * \param[in] prp_get Callback routine called when a property value is + * retrieved from the property + * \param[in] prp_delete Callback routine called when a property is deleted + * from a property list + * \param[in] prp_copy Callback routine called when a property is copied + * from an existing property list + * \param[in] prp_close Callback routine called when a property list is + * being closed and the property value will be disposed + * of + * + * \return \herr_t + * + * \deprecated As of HDF5-1.8 this function was deprecated in favor of + * H5Pinsert2() or the macro H5Pinsert(). + * + * \details H5Pinsert1() creates a new property in a property + * list. The property will exist only in this property list and + * copies made from it. + * + * The initial property value must be provided in \p value and + * the property value will be set accordingly. + * + * The name of the property must not already exist in this list, + * or this routine will fail. + * + * The \p prp_set and \p prp_get callback routines may be set to NULL + * if they are not needed. + * + * Zero-sized properties are allowed and do not store any data + * in the property list. The default value of a zero-size + * property may be set to NULL. They may be used to indicate the + * presence or absence of a particular piece of information. + * + * The \p prp_set routine is called before a new value is copied + * into the property. The #H5P_prp_set_func_t callback function + * is defined as #H5P_prp_cb2_t. + * The \p prp_set routine may modify the value pointer to be set and + * those changes will be used when setting the property's value. + * If the \p prp_set routine returns a negative value, the new property + * value is not copied into the property and the \p set routine + * returns an error value. The \p prp_set routine will be called for + * the initial value. + * + * \b Note: The \p prp_set callback function may be useful to range + * check the value being set for the property or may perform some + * transformation or translation of the value set. The \p prp_get + * callback would then reverse the transformation or translation. + * A single \p prp_get or \p prp_set callback could handle multiple + * properties by performing different actions based on the + * property name or other properties in the property list. + * + * The \p prp_get routine is called when a value is retrieved from + * a property value. The #H5P_prp_get_func_t callback function + * is defined as #H5P_prp_cb2_t. + * + * The \p prp_get routine may modify the value to be returned from + * the query and those changes will be preserved. If the \p prp_get + * routine returns a negative value, the query routine returns + * an error value. + * + * The \p prp_delete routine is called when a property is being + * deleted from a property list. The #H5P_prp_delete_func_t + * callback function is defined as #H5P_prp_cb2_t. + * + * The \p prp_copy routine is called when a new property list with + * this property is being created through a \p prp_copy operation. + * The #H5P_prp_copy_func_t callback function is defined as + * #H5P_prp_cb1_t. + * + * The \p prp_copy routine may modify the value to be set and those + * changes will be stored as the new value of the property. If the + * \p prp_copy routine returns a negative value, the new property value + * is not copied into the property and the prp_copy routine returns an + * error value. + * + * The \p prp_close routine is called when a property list with this + * property is being closed. + * The #H5P_prp_close_func_t callback function is defined as + * #H5P_prp_cb1_t. + * + * The \p prp_close routine may modify the value passed in, the + * value is not used by the library when the close routine + * returns. If the \p prp_close routine returns a negative value, + * the property list \p prp_close routine returns an error value + * but the property list is still closed. + * + * \b Note: There is no \p prp_create callback routine for temporary + * property list objects; the initial value is assumed to + * have any necessary setup already performed on it. + * + * The #H5P_prp_cb1_t is as follows: + * \snippet this H5P_prp_cb1_t_snip + * + * The #H5P_prp_cb2_t is as follows: + * \snippet this H5P_prp_cb2_t_snip + + * \cpp_c_api_note + */ +H5_DLL herr_t H5Pinsert1(hid_t plist_id, const char *name, size_t size, void *value, + H5P_prp_set_func_t prp_set, H5P_prp_get_func_t prp_get, + H5P_prp_delete_func_t prp_delete, H5P_prp_copy_func_t prp_copy, + H5P_prp_close_func_t prp_close); +/** + * \ingroup DCPL + * + * \brief Returns information about a filter in a pipeline (DEPRECATED) + * + * + * + * \plist_id{plist_id} + * \param[in] filter Sequence number within the filter pipeline of + * the filter for which information is sought + * \param[out] flags Bit vector specifying certain general properties + * of the filter + * \param[in,out] cd_nelmts Number of elements in \p cd_values + * \param[out] cd_values Auxiliary data for the filter + * \param[in] namelen Anticipated number of characters in \p name + * \param[out] name Name of the filter + * + * \return Returns the filter identifier if successful; Otherwise returns + * a negative value. See: #H5Z_filter_t + * + * \deprecated When was this function deprecated? + * + * \details H5Pget_filter1() returns information about a filter, specified + * by its filter number, in a filter pipeline, specified by the + * property list with which it is associated. + * + * \p plist_id must be a dataset or group creation property list. + * + * \p filter is a value between zero and N-1, as described in + * H5Pget_nfilters(). The function will return a negative value + * if the filter number is out of range. + * + * The structure of the \p flags argument is discussed in + * H5Pset_filter(). + * + * On input, \p cd_nelmts indicates the number of entries in the + * \p cd_values array, as allocated by the caller; on return, + * \p cd_nelmts contains the number of values defined by the filter. + * + * If \p name is a pointer to an array of at least \p namelen + * bytes, the filter name will be copied into that array. The name + * will be null terminated if \p namelen is large enough. The + * filter name returned will be the name appearing in the file, the + * name registered for the filter, or an empty string. + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * \version 1.8.0 N-bit and scale-offset filters added. + * \version 1.8.0 Function H5Pget_filter() renamed to H5Pget_filter1() and + * deprecated in this release. + * \version 1.6.4 \p filter parameter type changed to unsigned. + * + */ H5_DLL H5Z_filter_t H5Pget_filter1(hid_t plist_id, unsigned filter, unsigned int *flags /*out*/, size_t *cd_nelmts /*out*/, unsigned cd_values[] /*out*/, size_t namelen, char name[]); -H5_DLL herr_t H5Pget_filter_by_id1(hid_t plist_id, H5Z_filter_t id, unsigned int *flags /*out*/, - size_t *cd_nelmts /*out*/, unsigned cd_values[] /*out*/, size_t namelen, - char name[] /*out*/); -H5_DLL herr_t H5Pget_version(hid_t plist_id, unsigned *boot /*out*/, unsigned *freelist /*out*/, - unsigned *stab /*out*/, unsigned *shhdr /*out*/); -H5_DLL herr_t H5Pset_file_space(hid_t plist_id, H5F_file_space_type_t strategy, hsize_t threshold); -H5_DLL herr_t H5Pget_file_space(hid_t plist_id, H5F_file_space_type_t *strategy, hsize_t *threshold); +/** + * \ingroup DCPL + * + * \brief Returns information about the specified filter + * + * \plist_id{plist_id} + * \param[in] id Filter identifier + * \param[out] flags Bit vector specifying certain general properties + * of the filter + * \param[in,out] cd_nelmts Number of elements in \p cd_values + * \param[out] cd_values Auxiliary data for the filter + * \param[in] namelen Anticipated number of characters in \p name + * \param[out] name Name of the filter + * + * + * \return Returns a non-negative value if successful; Otherwise returns + * a negative value. + * + * \deprecated As of HDF5-1.8 this function was deprecated in favor of + * H5Pget_filter_by_id2() or the macro H5Pget_filter_by_id(). + * + * \details H5Pget_filter_by_id1() returns information about a filter, specified + * in \p id, a filter identifier. + * + * \p plist_id must be a dataset or group creation property list and + * \p id must be in the associated filter pipeline. + * + * The \p id and \p flags parameters are used in the same + * manner as described in the discussion of H5Pset_filter(). + * + * Aside from the fact that they are used for output, the parameters + * \p cd_nelmts and \p cd_values[] are used in the same manner as + * described in the discussion of H5Pset_filter(). + * On input, the \p cd_nelmts parameter indicates the number of entries + * in the \p cd_values[] array allocated by the calling program; + * on exit it contains the number of values defined by the filter. + * + * On input, the \p namelen parameter indicates the number of + * characters allocated for the filter name by the calling program + * in the array \p name[]. On exit \p name[] contains the name of the + * filter with one character of the name in each element of the array. + * + * If the filter specified in \p id is not set for the property + * list, an error will be returned and this function will fail. + * + * + * \version 1.8.5 Function extended to work with group creation property + * lists. + * \version 1.8.0 Function H5Pget_filter_by_id() renamed to + * H5Pget_filter_by_id1() and deprecated in this release. + * \version 1.6.0 Function introduced in this release. + */ +H5_DLL herr_t H5Pget_filter_by_id1(hid_t plist_id, H5Z_filter_t id, unsigned int *flags /*out*/, + size_t *cd_nelmts /*out*/, unsigned cd_values[] /*out*/, size_t namelen, + char name[] /*out*/); +/** + * \ingroup FCPL + * + * \brief Retrieves the version information of various objects + * for a file creation property list(deprecated) + * + * \plist_id + * \param[out] boot Pointer to location to return super block version number + * \param[out] freelist Pointer to location to return global freelist version number + * \param[out] stab Pointer to location to return symbol table version number + * \param[out] shhdr Pointer to location to return shared object header version + * number + * + * \return \herr_t + * + * \deprecated Deprecated in favor of the function H5Fget_info() + * + * \details H5Pget_version() retrieves the version information of various objects + * for a file creation property list. Any pointer parameters which are + * passed as NULL are not queried. + * + * \version 1.6.4 \p boot, \p freelist, \p stab, \p shhdr parameter types + * changed to unsigned. + * + */ +H5_DLL herr_t H5Pget_version(hid_t plist_id, unsigned *boot /*out*/, unsigned *freelist /*out*/, + unsigned *stab /*out*/, unsigned *shhdr /*out*/); +/** + * \ingroup FCPL + * + * \brief Sets the file space handling strategy and the free-space section + * size threshold. + * + * \fcpl_id{plist_id} + * \param[in] strategy The file space handling strategy to be used. See: + * #H5F_fspace_strategy_t + * \param[in] threshold The smallest free-space section size that the free + * space manager will track + * + * \return \herr_t + * + * \deprecated When was this function deprecated? + * + * \details Maps to the function H5Pset_file_space_strategy(). + * + */ +H5_DLL herr_t H5Pset_file_space(hid_t plist_id, H5F_file_space_type_t strategy, hsize_t threshold); +/** + * \ingroup FCPL + * + * \brief Retrieves the file space handling strategy, and threshold value for + * a file creation property list + * + * \fcpl_id{plist_id} + * \param[out] strategy Pointer to the file space handling strategy + * \param[out] threshold Pointer to the free-space section size threshold value + * + * \return \herr_t + * + * \deprecated When was this function deprecated? + * + * \details Maps to the function H5Pget_file_space_strategy() + * + * + */ +H5_DLL herr_t H5Pget_file_space(hid_t plist_id, H5F_file_space_type_t *strategy, hsize_t *threshold); #endif /* H5_NO_DEPRECATED_SYMBOLS */ #ifdef __cplusplus |