diff options
Diffstat (limited to 'src/H5Ppublic.h')
-rw-r--r-- | src/H5Ppublic.h | 252 |
1 files changed, 249 insertions, 3 deletions
diff --git a/src/H5Ppublic.h b/src/H5Ppublic.h index bb5d421..a08119d 100644 --- a/src/H5Ppublic.h +++ b/src/H5Ppublic.h @@ -328,7 +328,6 @@ typedef enum H5D_mpio_actual_io_mode_t { H5D_MPIO_CHUNK_MIXED = 0x1 | 0x2, /**< HDF5 performed one the chunk collective optimization schemes and some chunks were accessed independently, some collectively. */ - /** \internal The contiguous case is separate from the bit field. */ H5D_MPIO_CONTIGUOUS_COLLECTIVE = 0x4 /**< Collective I/O was performed on a contiguous dataset */ } H5D_mpio_actual_io_mode_t; @@ -344,7 +343,8 @@ typedef enum H5D_mpio_no_collective_cause_t { H5D_MPIO_SET_INDEPENDENT = 0x01, /**< Collective I/O was not performed because independent I/O was requested */ H5D_MPIO_DATATYPE_CONVERSION = 0x02, - /**< Collective I/O was not performed because datatype conversions were required */ + /**< Collective I/O was not performed because datatype conversions were required and selection I/O was not + possible (see below) */ H5D_MPIO_DATA_TRANSFORMS = 0x04, /**< Collective I/O was not performed because data transforms needed to be applied */ H5D_MPIO_MPI_OPT_TYPES_ENV_VAR_DISABLED = 0x08, @@ -357,11 +357,72 @@ typedef enum H5D_mpio_no_collective_cause_t { /**< Collective I/O was not performed because parallel filtered writes are disabled */ H5D_MPIO_ERROR_WHILE_CHECKING_COLLECTIVE_POSSIBLE = 0x80, /**< Error */ - H5D_MPIO_NO_COLLECTIVE_MAX_CAUSE = 0x100 + H5D_MPIO_NO_SELECTION_IO = 0x100, + /**< Collective I/O would be supported by selection or vector I/O but that feature was disabled + (see causes via H5Pget_no_selection_io_cause()) */ + H5D_MPIO_NO_COLLECTIVE_MAX_CAUSE = 0x200 /**< Sentinel */ } H5D_mpio_no_collective_cause_t; //! <!-- [H5D_mpio_no_collective_cause_t_snip] --> +/** + * Causes for H5Pget_no_selection_io_cause() property + */ +#define H5D_SEL_IO_DISABLE_BY_API \ + (0x0001u) /**< Selection I/O was not performed because \ + the feature was disabled by the API */ +#define H5D_SEL_IO_NOT_CONTIGUOUS_OR_CHUNKED_DATASET \ + (0x0002u) /**< Selection I/O was not performed because the \ + dataset was neither contiguous nor chunked */ +#define H5D_SEL_IO_CONTIGUOUS_SIEVE_BUFFER \ + (0x0004u) /**< Selection I/O was not performed because of \ + sieve buffer for contiguous dataset */ +#define H5D_SEL_IO_NO_VECTOR_OR_SELECTION_IO_CB \ + (0x0008u) /**< Selection I/O was not performed because the VFD \ + does not have vector or selection I/O callback */ +#define H5D_SEL_IO_PAGE_BUFFER \ + (0x0010u) /**< Selection I/O was not performed because of \ + page buffer */ +#define H5D_SEL_IO_DATASET_FILTER \ + (0x0020u) /**< Selection I/O was not performed because of \ + dataset filters */ +#define H5D_SEL_IO_CHUNK_CACHE \ + (0x0040u) /**< Selection I/O was not performed because of \ + chunk cache */ +#define H5D_SEL_IO_TCONV_BUF_TOO_SMALL \ + (0x0080u) /**< Selection I/O was not performed because the \ + type conversion buffer is too small */ +#define H5D_SEL_IO_BKG_BUF_TOO_SMALL \ + (0x0100u) /**< Selection I/O was not performed because the \ + type conversion background buffer is too small */ +#define H5D_SEL_IO_DEFAULT_OFF \ + (0x0200u) /**< Selection I/O was not performed because the \ + selection I/O mode is DEFAULT and the library \ + chose it to be off for this case */ + +/* Causes for H5D_MPIO_NO_SELECTION_IO */ +#define H5D_MPIO_NO_SELECTION_IO_CAUSES \ + (H5D_SEL_IO_DISABLE_BY_API | H5D_SEL_IO_TCONV_BUF_TOO_SMALL | H5D_SEL_IO_BKG_BUF_TOO_SMALL | \ + H5D_SEL_IO_DATASET_FILTER | H5D_SEL_IO_CHUNK_CACHE) + +//! <!--[H5D_selection_io_mode_t_snip] --> +/** + * Selection I/O mode property + * + * \details The default value, #H5D_SELECTION_IO_MODE_DEFAULT, + * indicates selection I/O can be ON or OFF as + * determined by library internal. + */ +typedef enum H5D_selection_io_mode_t { + H5D_SELECTION_IO_MODE_DEFAULT = 0, + /**< Default selection I/O mode. */ + H5D_SELECTION_IO_MODE_OFF, + /**< Selection I/O is off. */ + H5D_SELECTION_IO_MODE_ON + /**< Selection I/O is on. */ +} H5D_selection_io_mode_t; +//! <!--[H5D_selection_io_mode_t_snip] --> + /********************/ /* Public Variables */ /********************/ @@ -8205,6 +8266,191 @@ H5_DLL herr_t H5Pset_dataset_io_hyperslab_selection(hid_t plist_id, unsigned ran const hsize_t count[], const hsize_t block[]); /** + * + * \ingroup DXPL + * + * \brief Sets the selection I/O mode + * + * \dxpl_id{plist_id} + * \param[in] selection_io_mode The selection I/O mode to be set + * + * \return \herr_t + * + * \details H5Pset_selection_io() sets the selection I/O mode + * \p selection_io_mode in the dataset transfer property + * list \p plist_id. + * + * This can be used to enable collective I/O with type conversion, or + * with custom VFDs that support vector or selection I/O. + * + * Values that can be set in \p selection_io_mode: + * \snippet this H5D_selection_io_mode_t_snip + * \click4more + * + * \note The library may not perform selection I/O as it asks for if the + * layout callback determines that it is not feasible to do so. Please + * refer to H5Pget_no_selection_io_cause() for details. + * + * When used with type conversion, selection I/O requires the type + * conversion buffer (and the background buffer if applicable) be large + * enough to hold the entirety of the data involved in the I/O. For + * read operations, the library will use the application's read buffer + * as the type conversion buffer if the memory type is not smaller than + * the file type, eliminating the need for a separate type conversion + * buffer (a background buffer may still be required). For write + * operations, the library will similarly use the write buffer as a + * type conversion buffer, but only if H5Pset_modify_write_buf() is + * used to allow the library to modify the contents of the write + * buffer. + * + * \since 1.14.1 + * + */ +H5_DLL herr_t H5Pset_selection_io(hid_t plist_id, H5D_selection_io_mode_t selection_io_mode); + +/** + * + * \ingroup DXPL + * + * \brief Retrieves the selection I/O mode + * + * \dxpl_id{plist_id} + * \param[out] selection_io_mode The selection I/O mode + * + * \return \herr_t + * + * \details H5Pget_selection_io() queries the selection I/O mode set in + * in the dataset transfer property list \p plist_id. + * + * Values returned in \p selection_io_mode: + * \snippet this H5D_selection_io_mode_t_snip + * \click4more + * + * \note The library may not perform selection I/O as it asks for if the + * layout callback determines that it is not feasible to do so. Please + * refer to H5Pget_no_selection_io_cause() for details. + * + * \since 1.14.1 + * + */ +H5_DLL herr_t H5Pget_selection_io(hid_t plist_id, H5D_selection_io_mode_t *selection_io_mode); + +/** + * \ingroup DXPL + * + * \brief Retrieves the cause for not performing selection or vector I/O on the + * last parallel I/O call + * + * \dxpl_id{plist_id} + * \param[out] no_selection_io_cause A bitwise set value indicating the relevant + * causes that prevented selection I/O from + * being performed + * \return \herr_t + * + * \par Motivation: + * A user can request selection I/O to be performed via a data transfer + * property list (DXPL). This can be used to enable collective I/O with + * type conversion, or with custom VFDs that support vector or selection + * I/O. However, there are conditions that can cause HDF5 to forgo + * selection or vector I/O and perform legacy (scalar) I/O instead. + * + * \details H5Pget_no_selection_io_cause() can be used to determine whether + * selection or vector I/O was applied for the last preceding I/O call. + * If selection or vector I/O was not used, this function retrieves the + * cause(s) that prevent selection or vector I/O to be performed on + * that I/O call. The properties retrieved by this function are set + * before I/O takes place and are retained even when I/O fails. + * + * If a selection I/O request falls back to vector I/O, that is not + * considered "breaking" selection I/O by this function, since vector + * I/O still passes all information to the file driver in a single + * callback. + * + * Valid values returned in \p no_selection_io_cause are listed + * as follows. If there are multiple causes, it is a bitwise OR of + * the relevant causes. + * + * - #H5D_SEL_IO_DISABLE_BY_API + * Selection I/O was not performed because the feature was disabled by the API + * - #H5D_SEL_IO_NOT_CONTIGUOUS_OR_CHUNKED_DATASET + * Selection I/O was not performed because the dataset was neither contiguous nor chunked + * - #H5D_SEL_IO_CONTIGUOUS_SIEVE_BUFFER + * Selection I/O was not performed because of sieve buffer for contiguous dataset + * - #H5D_SEL_IO_NO_VECTOR_OR_SELECTION_IO_CB + * Selection I/O was not performed because the VFD does not have vector or selection I/O callback + * - #H5D_SEL_IO_PAGE_BUFFER + * Selection I/O was not performed because of page buffer + * - #H5D_SEL_IO_DATASET_FILTER + * Selection I/O was not performed because of dataset filters + * - #H5D_SEL_IO_CHUNK_CACHE + * Selection I/O was not performed because of chunk cache + * - #H5D_SEL_IO_TCONV_BUF_TOO_SMALL + * Selection I/O was not performed because the type conversion buffer is too small + * - #H5D_SEL_IO_BKG_BUF_TOO_SMALL + * Selection I/O was not performed because the type conversion background buffer is too small + * - #H5D_SEL_IO_DEFAULT_OFF + * Selection I/O was not performed because the selection I/O mode is DEFAULT and the library chose it + * to be off for this case + * + * \since 1.14.1 + * + */ +H5_DLL herr_t H5Pget_no_selection_io_cause(hid_t plist_id, uint32_t *no_selection_io_cause); + +/** + * + * \ingroup DXPL + * + * \brief Allows the library to modify the contents of the write buffer + * + * \dxpl_id{plist_id} + * \param[in] modify_write_buf Whether the library can modify the contents of the write buffer + * + * \return \herr_t + * + * \details H5Pset_modify_write_buf() sets whether the library is allowed to + * modify the contents of write buffers passed to HDF5 API routines + * that are passed the dataset transfer property list \p plist_id. The + * default value for modify_write_buf is FALSE. + * + * This function can be used to allow the library to perform in-place + * type conversion on write operations to save memory space. This is + * currently only used for selection I/O operations, which are used for + * collective I/O with type conversion. After making an API call with + * this parameter set to TRUE, the contents of the write buffer are + * undefined. + * + * \note When modify_write_buf is set to TRUE the library may violate the + * const qualifier on the API parameter for the write buffer. + * + * \since 1.14.1 + * + */ +H5_DLL herr_t H5Pset_modify_write_buf(hid_t plist_id, hbool_t modify_write_buf); + +/** + * + * \ingroup DXPL + * + * \brief Retrieves the "modify write buffer" property + * + * \dxpl_id{plist_id} + * \param[out] modify_write_buf Whether the library can modify the contents of the write buffer + * + * \return \herr_t + * + * \details H5Pget_modify_write_buf() gets the "modify write buffer" property + * from the dataset transfer property list \p plist_id. This property + * determines whether the library is allowed to modify the contents of + * write buffers passed to HDF5 API routines that are passed + * \p plist_id. The default value for modify_write_buf is FALSE. + * + * \since 1.14.1 + * + */ +H5_DLL herr_t H5Pget_modify_write_buf(hid_t plist_id, hbool_t *modify_write_buf); + +/** * \ingroup LCPL * * \brief Determines whether property is set to enable creating missing |