diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/H5Dcontig.c | 46 | ||||
| -rw-r--r-- | src/H5Dseq.c | 16 | ||||
| -rw-r--r-- | src/H5Fcontig.c | 46 | ||||
| -rw-r--r-- | src/H5Fprivate.h | 4 | ||||
| -rw-r--r-- | src/H5Fseq.c | 16 | ||||
| -rw-r--r-- | src/H5Shyper.c | 492 |
6 files changed, 352 insertions, 268 deletions
diff --git a/src/H5Dcontig.c b/src/H5Dcontig.c index fa01acd..a93e410 100644 --- a/src/H5Dcontig.c +++ b/src/H5Dcontig.c @@ -60,23 +60,32 @@ H5F_contig_read(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, hid_t dxp if(f->shared->lf->feature_flags&H5FD_FEAT_DATA_SIEVE) { /* Try reading from the data sieve buffer */ if(f->shared->sieve_buf) { + haddr_t sieve_start, sieve_end; /* Start & end locations of sieve buffer */ + haddr_t contig_end; /* End locations of block to write */ + hsize_t sieve_size; /* size of sieve buffer */ + + /* Stash local copies of these value */ + sieve_start=f->shared->sieve_loc; + sieve_size=f->shared->sieve_size; + sieve_end=sieve_start+sieve_size; + contig_end=addr+size-1; + /* If entire read is within the sieve buffer, read it from the buffer */ - if((addr>=f->shared->sieve_loc && addr<(f->shared->sieve_loc+f->shared->sieve_size)) - && ((addr+size-1)>=f->shared->sieve_loc && (addr+size-1)<(f->shared->sieve_loc+f->shared->sieve_size))) { + if(addr>=sieve_start && contig_end<sieve_end) { /* Grab the data out of the buffer */ - HDmemcpy(buf,f->shared->sieve_buf+(addr-f->shared->sieve_loc),size); + HDmemcpy(buf,f->shared->sieve_buf+(addr-sieve_start),size); } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>f->shared->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ - if((f->shared->sieve_loc>=addr && f->shared->sieve_loc<(addr+size)) - || ((f->shared->sieve_loc+f->shared->sieve_size-1)>=addr && (f->shared->sieve_loc+f->shared->sieve_size-1)<(addr+size))) { + if((sieve_start>=addr && sieve_start<(contig_end+1)) + || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } @@ -97,7 +106,7 @@ H5F_contig_read(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, hid_t dxp /* Flush the sieve buffer if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } @@ -213,11 +222,20 @@ H5F_contig_write(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, if(f->shared->lf->feature_flags&H5FD_FEAT_DATA_SIEVE) { /* Try writing to the data sieve buffer */ if(f->shared->sieve_buf) { + haddr_t sieve_start, sieve_end; /* Start & end locations of sieve buffer */ + haddr_t contig_end; /* End locations of block to write */ + hsize_t sieve_size; /* size of sieve buffer */ + + /* Stash local copies of these value */ + sieve_start=f->shared->sieve_loc; + sieve_size=f->shared->sieve_size; + sieve_end=sieve_start+sieve_size; + contig_end=addr+size-1; + /* If entire write is within the sieve buffer, write it to the buffer */ - if((addr>=f->shared->sieve_loc && addr<(f->shared->sieve_loc+f->shared->sieve_size)) - && ((addr+size-1)>=f->shared->sieve_loc && (addr+size-1)<(f->shared->sieve_loc+f->shared->sieve_size))) { + if(addr>=sieve_start && contig_end<sieve_end) { /* Grab the data out of the buffer */ - HDmemcpy(f->shared->sieve_buf+(addr-f->shared->sieve_loc),buf,size); + HDmemcpy(f->shared->sieve_buf+(addr-sieve_start),buf,size); /* Set sieve buffer dirty flag */ f->shared->sieve_dirty=1; @@ -228,12 +246,12 @@ H5F_contig_write(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>f->shared->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ - if((f->shared->sieve_loc>=addr && f->shared->sieve_loc<(addr+size)) - || ((f->shared->sieve_loc+f->shared->sieve_size-1)>=addr && (f->shared->sieve_loc+f->shared->sieve_size-1)<(addr+size))) { + if((sieve_start>=addr && sieve_start<(contig_end+1)) + || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } @@ -258,7 +276,7 @@ H5F_contig_write(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, /* Flush the sieve buffer if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } diff --git a/src/H5Dseq.c b/src/H5Dseq.c index 4181823..007a7fa 100644 --- a/src/H5Dseq.c +++ b/src/H5Dseq.c @@ -42,7 +42,7 @@ static intn interface_initialize_g = 0; * in memory. The data is read from file F and the array's size and * storage information is in LAYOUT. External files are described * according to the external file list, EFL. The sequence offset is - * FILE_OFFSET in the file and MEM_OFFSET in memory (offsets are + * FILE_OFFSET in the file (offsets are * in terms of bytes) and the size of the hyperslab is SEQ_LEN. The * total size of the file array is implied in the LAYOUT argument. * @@ -59,8 +59,7 @@ herr_t H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, const struct H5O_pline_t *pline, const H5O_fill_t *fill, const struct H5O_efl_t *efl, const H5S_t *file_space, size_t elmt_size, - hsize_t seq_len, hssize_t mem_offset, hssize_t file_offset, - void *_buf/*out*/) + hsize_t seq_len, hssize_t file_offset, void *_buf/*out*/) { uint8_t *buf = (uint8_t*)_buf; /*cast for arithmetic */ hsize_t dset_dims[H5O_LAYOUT_NDIMS]; /* dataspace dimensions */ @@ -120,7 +119,6 @@ H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, addr = layout->addr; } addr += file_offset; - buf += mem_offset; /* * Now begin to walk through the array, copying data from disk to @@ -194,7 +192,7 @@ H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, if(count<10) { printf("%s: elmt_size=%d, addr=%d, seq_len=%d\n",FUNC,(int)elmt_size,(int)addr,(int)seq_len); - printf("%s: file_offset=%d, mem_offset=%d\n",FUNC,(int)file_offset,(int)mem_offset); + printf("%s: file_offset=%d\n",FUNC,(int)file_offset); count++; } } @@ -271,7 +269,7 @@ H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, * in memory. The data is written to file F and the array's size and * storage information is in LAYOUT. External files are described * according to the external file list, EFL. The sequence offset is - * FILE_OFFSET in the file and MEM_OFFSET in memory (offsets are + * FILE_OFFSET in the file (offsets are * in terms of bytes) and the size of the hyperslab is SEQ_LEN. The * total size of the file array is implied in the LAYOUT argument. * @@ -288,8 +286,7 @@ herr_t H5F_seq_write(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, const struct H5O_pline_t *pline, const H5O_fill_t *fill, const struct H5O_efl_t *efl, const H5S_t *file_space, size_t elmt_size, - hsize_t seq_len, hssize_t mem_offset, hssize_t file_offset, - const void *_buf) + hsize_t seq_len, hssize_t file_offset, const void *_buf) { const uint8_t *buf = (const uint8_t*)_buf; /*cast for arithmetic */ hsize_t dset_dims[H5O_LAYOUT_NDIMS]; /* dataspace dimensions */ @@ -349,7 +346,6 @@ H5F_seq_write(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, addr = layout->addr; } addr += file_offset; - buf += mem_offset; /* * Now begin to walk through the array, copying data from disk to @@ -417,7 +413,7 @@ H5F_seq_write(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, if(count<10) { printf("%s: elmt_size=%d, addr=%d, seq_len=%lu\n",FUNC,(int)elmt_size,(int)addr,(unsigned long)seq_len); - printf("%s: file_offset=%d, mem_offset=%d\n",FUNC,(int)file_offset,(int)mem_offset); + printf("%s: file_offset=%d\n",FUNC,(int)file_offset); count++; } } diff --git a/src/H5Fcontig.c b/src/H5Fcontig.c index fa01acd..a93e410 100644 --- a/src/H5Fcontig.c +++ b/src/H5Fcontig.c @@ -60,23 +60,32 @@ H5F_contig_read(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, hid_t dxp if(f->shared->lf->feature_flags&H5FD_FEAT_DATA_SIEVE) { /* Try reading from the data sieve buffer */ if(f->shared->sieve_buf) { + haddr_t sieve_start, sieve_end; /* Start & end locations of sieve buffer */ + haddr_t contig_end; /* End locations of block to write */ + hsize_t sieve_size; /* size of sieve buffer */ + + /* Stash local copies of these value */ + sieve_start=f->shared->sieve_loc; + sieve_size=f->shared->sieve_size; + sieve_end=sieve_start+sieve_size; + contig_end=addr+size-1; + /* If entire read is within the sieve buffer, read it from the buffer */ - if((addr>=f->shared->sieve_loc && addr<(f->shared->sieve_loc+f->shared->sieve_size)) - && ((addr+size-1)>=f->shared->sieve_loc && (addr+size-1)<(f->shared->sieve_loc+f->shared->sieve_size))) { + if(addr>=sieve_start && contig_end<sieve_end) { /* Grab the data out of the buffer */ - HDmemcpy(buf,f->shared->sieve_buf+(addr-f->shared->sieve_loc),size); + HDmemcpy(buf,f->shared->sieve_buf+(addr-sieve_start),size); } /* end if */ /* Entire request is not within this data sieve buffer */ else { /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>f->shared->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ - if((f->shared->sieve_loc>=addr && f->shared->sieve_loc<(addr+size)) - || ((f->shared->sieve_loc+f->shared->sieve_size-1)>=addr && (f->shared->sieve_loc+f->shared->sieve_size-1)<(addr+size))) { + if((sieve_start>=addr && sieve_start<(contig_end+1)) + || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } @@ -97,7 +106,7 @@ H5F_contig_read(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, hid_t dxp /* Flush the sieve buffer if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } @@ -213,11 +222,20 @@ H5F_contig_write(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, if(f->shared->lf->feature_flags&H5FD_FEAT_DATA_SIEVE) { /* Try writing to the data sieve buffer */ if(f->shared->sieve_buf) { + haddr_t sieve_start, sieve_end; /* Start & end locations of sieve buffer */ + haddr_t contig_end; /* End locations of block to write */ + hsize_t sieve_size; /* size of sieve buffer */ + + /* Stash local copies of these value */ + sieve_start=f->shared->sieve_loc; + sieve_size=f->shared->sieve_size; + sieve_end=sieve_start+sieve_size; + contig_end=addr+size-1; + /* If entire write is within the sieve buffer, write it to the buffer */ - if((addr>=f->shared->sieve_loc && addr<(f->shared->sieve_loc+f->shared->sieve_size)) - && ((addr+size-1)>=f->shared->sieve_loc && (addr+size-1)<(f->shared->sieve_loc+f->shared->sieve_size))) { + if(addr>=sieve_start && contig_end<sieve_end) { /* Grab the data out of the buffer */ - HDmemcpy(f->shared->sieve_buf+(addr-f->shared->sieve_loc),buf,size); + HDmemcpy(f->shared->sieve_buf+(addr-sieve_start),buf,size); /* Set sieve buffer dirty flag */ f->shared->sieve_dirty=1; @@ -228,12 +246,12 @@ H5F_contig_write(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, /* Check if we can actually hold the I/O request in the sieve buffer */ if(size>f->shared->sieve_buf_size) { /* Check for any overlap with the current sieve buffer */ - if((f->shared->sieve_loc>=addr && f->shared->sieve_loc<(addr+size)) - || ((f->shared->sieve_loc+f->shared->sieve_size-1)>=addr && (f->shared->sieve_loc+f->shared->sieve_size-1)<(addr+size))) { + if((sieve_start>=addr && sieve_start<(contig_end+1)) + || ((sieve_end-1)>=addr && (sieve_end-1)<(contig_end+1))) { /* Flush the sieve buffer, if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } @@ -258,7 +276,7 @@ H5F_contig_write(H5F_t *f, H5FD_mem_t type, haddr_t addr, hsize_t size, /* Flush the sieve buffer if it's dirty */ if(f->shared->sieve_dirty) { /* Write to file */ - if (H5F_block_write(f, H5FD_MEM_DRAW, f->shared->sieve_loc, f->shared->sieve_size, dxpl_id, f->shared->sieve_buf)<0) { + if (H5F_block_write(f, H5FD_MEM_DRAW, sieve_start, sieve_size, dxpl_id, f->shared->sieve_buf)<0) { HRETURN_ERROR(H5E_IO, H5E_WRITEERROR, FAIL, "block write failed"); } diff --git a/src/H5Fprivate.h b/src/H5Fprivate.h index da19bd6..b9e5876 100644 --- a/src/H5Fprivate.h +++ b/src/H5Fprivate.h @@ -342,12 +342,12 @@ __DLL__ herr_t H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, const struct H5O_pline_t *pline, const struct H5O_fill_t *fill, const struct H5O_efl_t *efl, const struct H5S_t *file_space, size_t elmt_size, hsize_t seq_len, - hssize_t mem_offset, hssize_t file_offset, void *_buf/*out*/); + hssize_t file_offset, void *_buf/*out*/); __DLL__ herr_t H5F_seq_write (H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, const struct H5O_pline_t *pline, const struct H5O_fill_t *fill, const struct H5O_efl_t *efl, const struct H5S_t *file_space, size_t elmt_size, hsize_t seq_len, - hssize_t mem_offset, hssize_t file_offset, const void *_buf); + hssize_t file_offset, const void *_buf); /* Functions that operate on indexed storage */ diff --git a/src/H5Fseq.c b/src/H5Fseq.c index 4181823..007a7fa 100644 --- a/src/H5Fseq.c +++ b/src/H5Fseq.c @@ -42,7 +42,7 @@ static intn interface_initialize_g = 0; * in memory. The data is read from file F and the array's size and * storage information is in LAYOUT. External files are described * according to the external file list, EFL. The sequence offset is - * FILE_OFFSET in the file and MEM_OFFSET in memory (offsets are + * FILE_OFFSET in the file (offsets are * in terms of bytes) and the size of the hyperslab is SEQ_LEN. The * total size of the file array is implied in the LAYOUT argument. * @@ -59,8 +59,7 @@ herr_t H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, const struct H5O_pline_t *pline, const H5O_fill_t *fill, const struct H5O_efl_t *efl, const H5S_t *file_space, size_t elmt_size, - hsize_t seq_len, hssize_t mem_offset, hssize_t file_offset, - void *_buf/*out*/) + hsize_t seq_len, hssize_t file_offset, void *_buf/*out*/) { uint8_t *buf = (uint8_t*)_buf; /*cast for arithmetic */ hsize_t dset_dims[H5O_LAYOUT_NDIMS]; /* dataspace dimensions */ @@ -120,7 +119,6 @@ H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, addr = layout->addr; } addr += file_offset; - buf += mem_offset; /* * Now begin to walk through the array, copying data from disk to @@ -194,7 +192,7 @@ H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, if(count<10) { printf("%s: elmt_size=%d, addr=%d, seq_len=%d\n",FUNC,(int)elmt_size,(int)addr,(int)seq_len); - printf("%s: file_offset=%d, mem_offset=%d\n",FUNC,(int)file_offset,(int)mem_offset); + printf("%s: file_offset=%d\n",FUNC,(int)file_offset); count++; } } @@ -271,7 +269,7 @@ H5F_seq_read(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, * in memory. The data is written to file F and the array's size and * storage information is in LAYOUT. External files are described * according to the external file list, EFL. The sequence offset is - * FILE_OFFSET in the file and MEM_OFFSET in memory (offsets are + * FILE_OFFSET in the file (offsets are * in terms of bytes) and the size of the hyperslab is SEQ_LEN. The * total size of the file array is implied in the LAYOUT argument. * @@ -288,8 +286,7 @@ herr_t H5F_seq_write(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, const struct H5O_pline_t *pline, const H5O_fill_t *fill, const struct H5O_efl_t *efl, const H5S_t *file_space, size_t elmt_size, - hsize_t seq_len, hssize_t mem_offset, hssize_t file_offset, - const void *_buf) + hsize_t seq_len, hssize_t file_offset, const void *_buf) { const uint8_t *buf = (const uint8_t*)_buf; /*cast for arithmetic */ hsize_t dset_dims[H5O_LAYOUT_NDIMS]; /* dataspace dimensions */ @@ -349,7 +346,6 @@ H5F_seq_write(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, addr = layout->addr; } addr += file_offset; - buf += mem_offset; /* * Now begin to walk through the array, copying data from disk to @@ -417,7 +413,7 @@ H5F_seq_write(H5F_t *f, hid_t dxpl_id, const struct H5O_layout_t *layout, if(count<10) { printf("%s: elmt_size=%d, addr=%d, seq_len=%lu\n",FUNC,(int)elmt_size,(int)addr,(unsigned long)seq_len); - printf("%s: file_offset=%d, mem_offset=%d\n",FUNC,(int)file_offset,(int)mem_offset); + printf("%s: file_offset=%d\n",FUNC,(int)file_offset); count++; } } diff --git a/src/H5Shyper.c b/src/H5Shyper.c index 0557b4c..a9c247f 100644 --- a/src/H5Shyper.c +++ b/src/H5Shyper.c @@ -943,6 +943,13 @@ H5S_hyper_fread_opt (H5F_t *f, const struct H5O_layout_t *layout, hsize_t tmp_count[H5O_LAYOUT_NDIMS]; /* Temporary block count */ hsize_t tmp_block[H5O_LAYOUT_NDIMS]; /* Temporary block offset */ uint8_t *buf=(uint8_t *)_buf; /* Alias for pointer arithmetic */ + const H5S_hyper_dim_t *tdiminfo; /* Local pointer to diminfo information */ + hssize_t fast_dim_start, /* Local copies of fastest changing dimension info */ + fast_dim_offset; + hsize_t fast_dim_stride, /* Local copies of fastest changing dimension info */ + fast_dim_block, + fast_dim_count, + fast_dim_buf_off; intn fast_dim; /* Rank of the fastest changing dimension for the dataspace */ intn temp_dim; /* Temporary rank holder */ hsize_t acc; /* Accumulator */ @@ -1009,7 +1016,7 @@ printf("%s: Check 1.0\n",FUNC); /* Read in the rest of the sequence */ if (H5F_seq_read(f, dxpl_id, layout, pline, fill, efl, file_space, - elmt_size, actual_bytes, 0, buf_off, buf/*out*/)<0) { + elmt_size, actual_bytes, buf_off, buf/*out*/)<0) { HRETURN_ERROR(H5E_DATASPACE, H5E_READERROR, 0, "read error"); } @@ -1019,9 +1026,6 @@ printf("%s: Check 1.0\n",FUNC); /* Increment the count read */ num_read+=actual_read; - /* Decrement the number of elements left in selection */ - file_iter->hyp.elmt_left-=actual_read; - /* Advance the point iterator */ /* If we had enough buffer space to read in the rest of the sequence * in the fastest changing dimension, move the iterator offset to @@ -1084,6 +1088,17 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) last_buf_off=-1; buf_size=0; + /* Set the local copy of the diminfo pointer */ + tdiminfo=file_space->select.sel_info.hslab.diminfo; + + /* Set local copies of information for the fastest changing dimension */ + fast_dim_start=tdiminfo[fast_dim].start; + fast_dim_stride=tdiminfo[fast_dim].stride; + fast_dim_block=tdiminfo[fast_dim].block; + fast_dim_count=tdiminfo[fast_dim].count; + fast_dim_buf_off=slab[fast_dim]*fast_dim_stride; + fast_dim_offset=fast_dim_start+file_space->select.offset[fast_dim]; + /* Read in data until an entire sequence can't be read in any longer */ while(num_read<nelmts) { /* Check if we are running out of room in the buffer */ @@ -1116,7 +1131,7 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) else { /* Read in the sequence */ if (H5F_seq_read(f, dxpl_id, layout, pline, fill, efl, file_space, - elmt_size, buf_size, 0, last_buf_off, buf/*out*/)<0) { + elmt_size, buf_size, last_buf_off, buf/*out*/)<0) { HRETURN_ERROR(H5E_DATASPACE, H5E_READERROR, 0, "read error"); } /* end if */ @@ -1133,67 +1148,63 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) /* Increment the count read */ num_read+=actual_read; - /* Decrement the number of elements left in selection */ - file_iter->hyp.elmt_left-=actual_read; + /* Increment the offset and count for the fastest changing dimension */ + + /* Move to the next block in the current dimension */ + /* Check for partial block read! */ + if(actual_read<fast_dim_block) { + offset[fast_dim]+=actual_read; + buf_off+=actual_bytes; + continue; /* don't bother checking slower dimensions */ + } /* end if */ + else { + offset[fast_dim]+=fast_dim_stride; /* reset the offset in the fastest dimension */ + buf_off+=fast_dim_buf_off; + tmp_count[fast_dim]++; + } /* end else */ - /* Increment the offset and count */ - temp_dim=fast_dim; + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_count[fast_dim]<fast_dim_count) + continue; /* don't bother checking slower dimensions */ + else { + tmp_count[fast_dim]=0; /* reset back to the beginning of the line */ + offset[fast_dim]=fast_dim_offset; + + /* Re-compute the initial buffer offset */ + for(i=0,buf_off=0; i<ndims; i++) + buf_off+=offset[i]*slab[i]; + } /* end else */ + + /* Increment the offset and count for the other dimensions */ + temp_dim=fast_dim-1; while(temp_dim>=0) { - if(temp_dim==fast_dim) { + /* Move to the next row in the curent dimension */ + offset[temp_dim]++; + buf_off+=slab[temp_dim]; + tmp_block[temp_dim]++; + + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_block[temp_dim]<tdiminfo[temp_dim].block) + break; + else { /* Move to the next block in the current dimension */ - /* Check for partial block read! */ - if(actual_read<file_space->select.sel_info.hslab.diminfo[fast_dim].block) { - offset[temp_dim]+=actual_read; - buf_off+=actual_bytes; - break; - } /* end if */ - else { - offset[temp_dim]+=file_space->select.sel_info.hslab.diminfo[temp_dim].stride; /* reset the offset in the fastest dimension */ - buf_off+=slab[temp_dim]*file_space->select.sel_info.hslab.diminfo[temp_dim].stride; - tmp_count[temp_dim]++; - } /* end else */ + offset[temp_dim]+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block); + buf_off+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block)*slab[temp_dim]; + tmp_block[temp_dim]=0; + tmp_count[temp_dim]++; /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<file_space->select.sel_info.hslab.diminfo[temp_dim].count) + if(tmp_count[temp_dim]<tdiminfo[temp_dim].count) break; else { tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - offset[temp_dim]=file_space->select.sel_info.hslab.diminfo[temp_dim].start+file_space->select.offset[temp_dim]; + tmp_block[temp_dim]=0; + offset[temp_dim]=tdiminfo[temp_dim].start+file_space->select.offset[temp_dim]; /* Re-compute the initial buffer offset */ for(i=0,buf_off=0; i<ndims; i++) buf_off+=offset[i]*slab[i]; - } /* end else */ - } /* end if */ - else { - /* Move to the next row in the curent dimension */ - offset[temp_dim]++; - buf_off+=slab[temp_dim]; - tmp_block[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_block[temp_dim]<file_space->select.sel_info.hslab.diminfo[temp_dim].block) - break; - else { - /* Move to the next block in the current dimension */ - offset[temp_dim]+=(file_space->select.sel_info.hslab.diminfo[temp_dim].stride-file_space->select.sel_info.hslab.diminfo[temp_dim].block); - buf_off+=(file_space->select.sel_info.hslab.diminfo[temp_dim].stride-file_space->select.sel_info.hslab.diminfo[temp_dim].block)*slab[temp_dim]; - tmp_block[temp_dim]=0; - tmp_count[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<file_space->select.sel_info.hslab.diminfo[temp_dim].count) - break; - else { - tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - tmp_block[temp_dim]=0; - offset[temp_dim]=file_space->select.sel_info.hslab.diminfo[temp_dim].start+file_space->select.offset[temp_dim]; - - /* Re-compute the initial buffer offset */ - for(i=0,buf_off=0; i<ndims; i++) - buf_off+=offset[i]*slab[i]; - } - } /* end else */ + } } /* end else */ /* Decrement dimension count */ @@ -1205,7 +1216,7 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) if(last_buf_off>=0) { /* Read in the sequence */ if (H5F_seq_read(f, dxpl_id, layout, pline, fill, efl, file_space, - elmt_size, buf_size, 0, last_buf_off, buf/*out*/)<0) { + elmt_size, buf_size, last_buf_off, buf/*out*/)<0) { HRETURN_ERROR(H5E_DATASPACE, H5E_READERROR, 0, "read error"); } /* end if */ } /* end if */ @@ -1214,6 +1225,9 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) HDmemcpy(file_iter->hyp.pos, offset, ndims*sizeof(hssize_t)); } /* end if */ + /* Decrement the number of elements left in selection */ + file_iter->hyp.elmt_left-=num_read; + FUNC_LEAVE (num_read); } /* H5S_hyper_fread_opt() */ @@ -1501,6 +1515,13 @@ H5S_hyper_fwrite_opt (H5F_t *f, const struct H5O_layout_t *layout, hsize_t tmp_count[H5O_LAYOUT_NDIMS]; /* Temporary block count */ hsize_t tmp_block[H5O_LAYOUT_NDIMS]; /* Temporary block offset */ const uint8_t *buf=(const uint8_t *)_buf; /* Alias for pointer arithmetic */ + const H5S_hyper_dim_t *tdiminfo; /* Temporary pointer to diminfo information */ + hssize_t fast_dim_start, /* Local copies of fastest changing dimension info */ + fast_dim_offset; + hsize_t fast_dim_stride, /* Local copies of fastest changing dimension info */ + fast_dim_block, + fast_dim_count, + fast_dim_buf_off; intn fast_dim; /* Rank of the fastest changing dimension for the dataspace */ intn temp_dim; /* Temporary rank holder */ hsize_t acc; /* Accumulator */ @@ -1567,7 +1588,7 @@ printf("%s: Check 1.0\n",FUNC); /* Read in the rest of the sequence */ if (H5F_seq_write(f, dxpl_id, layout, pline, fill, efl, file_space, - elmt_size, actual_bytes, 0, buf_off, buf)<0) { + elmt_size, actual_bytes, buf_off, buf)<0) { HRETURN_ERROR(H5E_DATASPACE, H5E_WRITEERROR, 0, "write error"); } @@ -1577,9 +1598,6 @@ printf("%s: Check 1.0\n",FUNC); /* Increment the count write */ num_write+=actual_write; - /* Decrement the number of elements left in selection */ - file_iter->hyp.elmt_left-=actual_write; - /* Advance the point iterator */ /* If we had enough buffer space to write out the rest of the sequence * in the fastest changing dimension, move the iterator offset to @@ -1642,6 +1660,17 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) last_buf_off=-1; buf_size=0; + /* Set the local copy of the diminfo pointer */ + tdiminfo=file_space->select.sel_info.hslab.diminfo; + + /* Set local copies of information for the fastest changing dimension */ + fast_dim_start=tdiminfo[fast_dim].start; + fast_dim_stride=tdiminfo[fast_dim].stride; + fast_dim_block=tdiminfo[fast_dim].block; + fast_dim_count=tdiminfo[fast_dim].count; + fast_dim_buf_off=slab[fast_dim]*fast_dim_stride; + fast_dim_offset=fast_dim_start+file_space->select.offset[fast_dim]; + /* Read in data until an entire sequence can't be written out any longer */ while(num_write<nelmts) { /* Check if we are running out of room in the buffer */ @@ -1674,7 +1703,7 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) else { /* Write out the sequence */ if (H5F_seq_write(f, dxpl_id, layout, pline, fill, efl, file_space, - elmt_size, buf_size, 0, last_buf_off, buf)<0) { + elmt_size, buf_size, last_buf_off, buf)<0) { HRETURN_ERROR(H5E_DATASPACE, H5E_WRITEERROR, 0, "write error"); } /* end if */ @@ -1691,67 +1720,63 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) /* Increment the count write */ num_write+=actual_write; - /* Decrement the number of elements left in selection */ - file_iter->hyp.elmt_left-=actual_write; + /* Increment the offset and count for the fastest changing dimension */ + + /* Move to the next block in the current dimension */ + /* Check for partial block write! */ + if(actual_write<fast_dim_block) { + offset[fast_dim]+=actual_write; + buf_off+=actual_bytes; + continue; /* don't bother checking slower dimensions */ + } /* end if */ + else { + offset[fast_dim]+=fast_dim_stride; /* reset the offset in the fastest dimension */ + buf_off+=fast_dim_buf_off; + tmp_count[fast_dim]++; + } /* end else */ - /* Increment the offset and count */ - temp_dim=fast_dim; + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_count[fast_dim]<fast_dim_count) + continue; /* don't bother checking slower dimensions */ + else { + tmp_count[fast_dim]=0; /* reset back to the beginning of the line */ + offset[fast_dim]=fast_dim_offset; + + /* Re-compute the initial buffer offset */ + for(i=0,buf_off=0; i<ndims; i++) + buf_off+=offset[i]*slab[i]; + } /* end else */ + + /* Increment the offset and count for the other dimensions */ + temp_dim=fast_dim-1; while(temp_dim>=0) { - if(temp_dim==fast_dim) { + /* Move to the next row in the curent dimension */ + offset[temp_dim]++; + buf_off+=slab[temp_dim]; + tmp_block[temp_dim]++; + + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_block[temp_dim]<tdiminfo[temp_dim].block) + break; + else { /* Move to the next block in the current dimension */ - /* Check for partial block write! */ - if(actual_write<file_space->select.sel_info.hslab.diminfo[fast_dim].block) { - offset[temp_dim]+=actual_write; - buf_off+=actual_bytes; - break; - } /* end if */ - else { - offset[temp_dim]+=file_space->select.sel_info.hslab.diminfo[temp_dim].stride; /* reset the offset in the fastest dimension */ - buf_off+=slab[temp_dim]*file_space->select.sel_info.hslab.diminfo[temp_dim].stride; - tmp_count[temp_dim]++; - } /* end else */ + offset[temp_dim]+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block); + buf_off+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block)*slab[temp_dim]; + tmp_block[temp_dim]=0; + tmp_count[temp_dim]++; /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<file_space->select.sel_info.hslab.diminfo[temp_dim].count) + if(tmp_count[temp_dim]<tdiminfo[temp_dim].count) break; else { tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - offset[temp_dim]=file_space->select.sel_info.hslab.diminfo[temp_dim].start+file_space->select.offset[temp_dim]; + tmp_block[temp_dim]=0; + offset[temp_dim]=tdiminfo[temp_dim].start+file_space->select.offset[temp_dim]; /* Re-compute the initial buffer offset */ for(i=0,buf_off=0; i<ndims; i++) buf_off+=offset[i]*slab[i]; - } /* end else */ - } /* end if */ - else { - /* Move to the next row in the curent dimension */ - offset[temp_dim]++; - buf_off+=slab[temp_dim]; - tmp_block[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_block[temp_dim]<file_space->select.sel_info.hslab.diminfo[temp_dim].block) - break; - else { - /* Move to the next block in the current dimension */ - offset[temp_dim]+=(file_space->select.sel_info.hslab.diminfo[temp_dim].stride-file_space->select.sel_info.hslab.diminfo[temp_dim].block); - buf_off+=(file_space->select.sel_info.hslab.diminfo[temp_dim].stride-file_space->select.sel_info.hslab.diminfo[temp_dim].block)*slab[temp_dim]; - tmp_block[temp_dim]=0; - tmp_count[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<file_space->select.sel_info.hslab.diminfo[temp_dim].count) - break; - else { - tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - tmp_block[temp_dim]=0; - offset[temp_dim]=file_space->select.sel_info.hslab.diminfo[temp_dim].start+file_space->select.offset[temp_dim]; - - /* Re-compute the initial buffer offset */ - for(i=0,buf_off=0; i<ndims; i++) - buf_off+=offset[i]*slab[i]; - } - } /* end else */ + } } /* end else */ /* Decrement dimension count */ @@ -1763,7 +1788,7 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) if(last_buf_off>=0) { /* Write out the sequence */ if (H5F_seq_write(f, dxpl_id, layout, pline, fill, efl, file_space, - elmt_size, buf_size, 0, last_buf_off, buf)<0) { + elmt_size, buf_size, last_buf_off, buf)<0) { HRETURN_ERROR(H5E_DATASPACE, H5E_WRITEERROR, 0, "write error"); } /* end if */ } /* end if */ @@ -1772,6 +1797,9 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) HDmemcpy(file_iter->hyp.pos, offset, ndims*sizeof(hssize_t)); } /* end if */ + /* Decrement the number of elements left in selection */ + file_iter->hyp.elmt_left-=num_write; + FUNC_LEAVE (num_write); } /* H5S_hyper_fwrite_opt() */ @@ -2032,6 +2060,13 @@ H5S_hyper_mread_opt (const void *_buf, size_t elmt_size, hsize_t tmp_block[H5O_LAYOUT_NDIMS]; /* Temporary block offset */ const uint8_t *src=(const uint8_t *)_buf; /* Alias for pointer arithmetic */ uint8_t *dst=(uint8_t *)_tconv_buf; /* Alias for pointer arithmetic */ + const H5S_hyper_dim_t *tdiminfo; /* Temporary pointer to diminfo information */ + hssize_t fast_dim_start, /* Local copies of fastest changing dimension info */ + fast_dim_offset; + hsize_t fast_dim_stride, /* Local copies of fastest changing dimension info */ + fast_dim_block, + fast_dim_count, + fast_dim_buf_off; intn fast_dim; /* Rank of the fastest changing dimension for the dataspace */ intn temp_dim; /* Temporary rank holder */ hsize_t acc; /* Accumulator */ @@ -2105,14 +2140,11 @@ printf("%s: Check 1.0\n",FUNC); HDmemcpy(dst,src+buf_off,actual_bytes); /* Increment the offset of the buffer */ - dst+=elmt_size*actual_read; + dst+=actual_bytes; /* Increment the count read */ num_read+=actual_read; - /* Decrement the number of elements left in selection */ - mem_iter->hyp.elmt_left-=actual_read; - /* Advance the point iterator */ /* If we had enough buffer space to read in the rest of the sequence * in the fastest changing dimension, move the iterator offset to @@ -2175,6 +2207,17 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) (int)i,(int)mem_space->select.sel_info.hslab.diminfo[i].count); #endif /* QAK */ + /* Set the local copy of the diminfo pointer */ + tdiminfo=mem_space->select.sel_info.hslab.diminfo; + + /* Set local copies of information for the fastest changing dimension */ + fast_dim_start=tdiminfo[fast_dim].start; + fast_dim_stride=tdiminfo[fast_dim].stride; + fast_dim_block=tdiminfo[fast_dim].block; + fast_dim_count=tdiminfo[fast_dim].count; + fast_dim_buf_off=slab[fast_dim]*fast_dim_stride; + fast_dim_offset=fast_dim_start+mem_space->select.offset[fast_dim]; + /* Read in data until an entire sequence can't be written out any longer */ while(num_read<nelmts) { /* Check if we are running out of room in the buffer */ @@ -2193,72 +2236,68 @@ for(i=0; i<mem_space->extent.u.simple.rank; i++) HDmemcpy(dst,src+buf_off,actual_bytes); /* Increment the offset of the buffer */ - dst+=elmt_size*actual_read; + dst+=actual_bytes; /* Increment the count read */ num_read+=actual_read; - /* Decrement the number of elements left in selection */ - mem_iter->hyp.elmt_left-=actual_read; + /* Increment the offset and count for the fastest changing dimension */ + + /* Move to the next block in the current dimension */ + /* Check for partial block read! */ + if(actual_read<fast_dim_block) { + offset[fast_dim]+=actual_read; + buf_off+=actual_bytes; + continue; /* don't bother checking slower dimensions */ + } /* end if */ + else { + offset[fast_dim]+=fast_dim_stride; /* reset the offset in the fastest dimension */ + buf_off+=fast_dim_buf_off; + tmp_count[fast_dim]++; + } /* end else */ - /* Increment the offset and count */ - temp_dim=fast_dim; + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_count[fast_dim]<fast_dim_count) + continue; /* don't bother checking slower dimensions */ + else { + tmp_count[fast_dim]=0; /* reset back to the beginning of the line */ + offset[fast_dim]=fast_dim_offset; + + /* Re-compute the initial buffer offset */ + for(i=0,buf_off=0; i<ndims; i++) + buf_off+=offset[i]*slab[i]; + } /* end else */ + + /* Increment the offset and count for the other dimensions */ + temp_dim=fast_dim-1; while(temp_dim>=0) { - if(temp_dim==fast_dim) { + /* Move to the next row in the curent dimension */ + offset[temp_dim]++; + buf_off+=slab[temp_dim]; + tmp_block[temp_dim]++; + + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_block[temp_dim]<tdiminfo[temp_dim].block) + break; + else { /* Move to the next block in the current dimension */ - /* Check for partial block read! */ - if(actual_read<mem_space->select.sel_info.hslab.diminfo[fast_dim].block) { - offset[temp_dim]+=actual_read; - buf_off+=actual_bytes; - break; - } /* end if */ - else { - offset[temp_dim]+=mem_space->select.sel_info.hslab.diminfo[temp_dim].stride; /* reset the offset in the fastest dimension */ - buf_off+=slab[temp_dim]*mem_space->select.sel_info.hslab.diminfo[temp_dim].stride; - tmp_count[temp_dim]++; - } /* end else */ + offset[temp_dim]+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block); + buf_off+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block)*slab[temp_dim]; + tmp_block[temp_dim]=0; + tmp_count[temp_dim]++; /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<mem_space->select.sel_info.hslab.diminfo[temp_dim].count) + if(tmp_count[temp_dim]<tdiminfo[temp_dim].count) break; else { tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - offset[temp_dim]=mem_space->select.sel_info.hslab.diminfo[temp_dim].start+mem_space->select.offset[temp_dim]; + tmp_block[temp_dim]=0; + offset[temp_dim]=tdiminfo[temp_dim].start+mem_space->select.offset[temp_dim]; /* Re-compute the initial buffer offset */ for(i=0,buf_off=0; i<ndims; i++) buf_off+=offset[i]*slab[i]; - } /* end else */ - } /* end if */ - else { - /* Move to the next row in the curent dimension */ - offset[temp_dim]++; - buf_off+=slab[temp_dim]; - tmp_block[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_block[temp_dim]<mem_space->select.sel_info.hslab.diminfo[temp_dim].block) - break; - else { - /* Move to the next block in the current dimension */ - offset[temp_dim]+=(mem_space->select.sel_info.hslab.diminfo[temp_dim].stride-mem_space->select.sel_info.hslab.diminfo[temp_dim].block); - buf_off+=(mem_space->select.sel_info.hslab.diminfo[temp_dim].stride-mem_space->select.sel_info.hslab.diminfo[temp_dim].block)*slab[temp_dim]; - tmp_block[temp_dim]=0; - tmp_count[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<mem_space->select.sel_info.hslab.diminfo[temp_dim].count) - break; - else { - tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - tmp_block[temp_dim]=0; - offset[temp_dim]=mem_space->select.sel_info.hslab.diminfo[temp_dim].start+mem_space->select.offset[temp_dim]; - - /* Re-compute the initial buffer offset */ - for(i=0,buf_off=0; i<ndims; i++) - buf_off+=offset[i]*slab[i]; - } - } /* end else */ + } } /* end else */ /* Decrement dimension count */ @@ -2270,6 +2309,9 @@ for(i=0; i<mem_space->extent.u.simple.rank; i++) HDmemcpy(mem_iter->hyp.pos, offset, ndims*sizeof(hssize_t)); } /* end if */ + /* Decrement the number of elements left in selection */ + mem_iter->hyp.elmt_left-=num_read; + FUNC_LEAVE (num_read); } /* end H5S_hyper_mread_opt() */ @@ -2525,6 +2567,13 @@ H5S_hyper_mwrite_opt (const void *_tconv_buf, size_t elmt_size, hsize_t tmp_block[H5O_LAYOUT_NDIMS]; /* Temporary block offset */ const uint8_t *src=(const uint8_t *)_tconv_buf; /* Alias for pointer arithmetic */ uint8_t *dst=(uint8_t *)_buf; /* Alias for pointer arithmetic */ + const H5S_hyper_dim_t *tdiminfo; /* Temporary pointer to diminfo information */ + hssize_t fast_dim_start, /* Local copies of fastest changing dimension info */ + fast_dim_offset; + hsize_t fast_dim_stride, /* Local copies of fastest changing dimension info */ + fast_dim_block, + fast_dim_count, + fast_dim_buf_off; intn fast_dim; /* Rank of the fastest changing dimension for the dataspace */ intn temp_dim; /* Temporary rank holder */ hsize_t acc; /* Accumulator */ @@ -2599,14 +2648,11 @@ printf("%s: Check 1.0\n",FUNC); HDmemcpy(dst+buf_off,src,actual_bytes); /* Increment the offset of the buffer */ - src+=elmt_size*actual_write; + src+=actual_bytes; /* Increment the count write */ num_write+=actual_write; - /* Decrement the number of elements left in selection */ - mem_iter->hyp.elmt_left-=actual_write; - /* Advance the point iterator */ /* If we had enough buffer space to write out the rest of the sequence * in the fastest changing dimension, move the iterator offset to @@ -2669,6 +2715,17 @@ for(i=0; i<file_space->extent.u.simple.rank; i++) (int)i,(int)mem_space->select.sel_info.hslab.diminfo[i].count); #endif /* QAK */ + /* Set the local copy of the diminfo pointer */ + tdiminfo=mem_space->select.sel_info.hslab.diminfo; + + /* Set local copies of information for the fastest changing dimension */ + fast_dim_start=tdiminfo[fast_dim].start; + fast_dim_stride=tdiminfo[fast_dim].stride; + fast_dim_block=tdiminfo[fast_dim].block; + fast_dim_count=tdiminfo[fast_dim].count; + fast_dim_buf_off=slab[fast_dim]*fast_dim_stride; + fast_dim_offset=fast_dim_start+mem_space->select.offset[fast_dim]; + /* Read in data until an entire sequence can't be written out any longer */ while(num_write<nelmts) { /* Check if we are running out of room in the buffer */ @@ -2691,72 +2748,68 @@ printf("%s: buf_off=%u, actual_bytes=%u\n",FUNC,(unsigned)buf_off,(int)actual_by #endif /* QAK */ /* Increment the offset of the buffer */ - src+=elmt_size*actual_write; + src+=actual_bytes; /* Increment the count write */ num_write+=actual_write; - /* Decrement the number of elements left in selection */ - mem_iter->hyp.elmt_left-=actual_write; + /* Increment the offset and count for the fastest changing dimension */ + + /* Move to the next block in the current dimension */ + /* Check for partial block write! */ + if(actual_write<fast_dim_block) { + offset[fast_dim]+=actual_write; + buf_off+=actual_bytes; + continue; /* don't bother checking slower dimensions */ + } /* end if */ + else { + offset[fast_dim]+=fast_dim_stride; /* reset the offset in the fastest dimension */ + buf_off+=fast_dim_buf_off; + tmp_count[fast_dim]++; + } /* end else */ - /* Increment the offset and count */ - temp_dim=fast_dim; + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_count[fast_dim]<fast_dim_count) + continue; /* don't bother checking slower dimensions */ + else { + tmp_count[fast_dim]=0; /* reset back to the beginning of the line */ + offset[fast_dim]=fast_dim_offset; + + /* Re-compute the initial buffer offset */ + for(i=0,buf_off=0; i<ndims; i++) + buf_off+=offset[i]*slab[i]; + } /* end else */ + + /* Increment the offset and count for the other dimensions */ + temp_dim=fast_dim-1; while(temp_dim>=0) { - if(temp_dim==fast_dim) { + /* Move to the next row in the curent dimension */ + offset[temp_dim]++; + buf_off+=slab[temp_dim]; + tmp_block[temp_dim]++; + + /* If this block is still in the range of blocks to output for the dimension, break out of loop */ + if(tmp_block[temp_dim]<tdiminfo[temp_dim].block) + break; + else { /* Move to the next block in the current dimension */ - /* Check for partial block write! */ - if(actual_write<mem_space->select.sel_info.hslab.diminfo[fast_dim].block) { - offset[temp_dim]+=actual_write; - buf_off+=actual_bytes; - break; - } /* end if */ - else { - offset[temp_dim]+=mem_space->select.sel_info.hslab.diminfo[temp_dim].stride; /* reset the offset in the fastest dimension */ - buf_off+=slab[temp_dim]*mem_space->select.sel_info.hslab.diminfo[temp_dim].stride; - tmp_count[temp_dim]++; - } /* end else */ + offset[temp_dim]+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block); + buf_off+=(tdiminfo[temp_dim].stride-tdiminfo[temp_dim].block)*slab[temp_dim]; + tmp_block[temp_dim]=0; + tmp_count[temp_dim]++; /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<mem_space->select.sel_info.hslab.diminfo[temp_dim].count) + if(tmp_count[temp_dim]<tdiminfo[temp_dim].count) break; else { tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - offset[temp_dim]=mem_space->select.sel_info.hslab.diminfo[temp_dim].start+mem_space->select.offset[temp_dim]; + tmp_block[temp_dim]=0; + offset[temp_dim]=tdiminfo[temp_dim].start+mem_space->select.offset[temp_dim]; /* Re-compute the initial buffer offset */ for(i=0,buf_off=0; i<ndims; i++) buf_off+=offset[i]*slab[i]; - } /* end else */ - } /* end if */ - else { - /* Move to the next row in the curent dimension */ - offset[temp_dim]++; - buf_off+=slab[temp_dim]; - tmp_block[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_block[temp_dim]<mem_space->select.sel_info.hslab.diminfo[temp_dim].block) - break; - else { - /* Move to the next block in the current dimension */ - offset[temp_dim]+=(mem_space->select.sel_info.hslab.diminfo[temp_dim].stride-mem_space->select.sel_info.hslab.diminfo[temp_dim].block); - buf_off+=(mem_space->select.sel_info.hslab.diminfo[temp_dim].stride-mem_space->select.sel_info.hslab.diminfo[temp_dim].block)*slab[temp_dim]; - tmp_block[temp_dim]=0; - tmp_count[temp_dim]++; - - /* If this block is still in the range of blocks to output for the dimension, break out of loop */ - if(tmp_count[temp_dim]<mem_space->select.sel_info.hslab.diminfo[temp_dim].count) - break; - else { - tmp_count[temp_dim]=0; /* reset back to the beginning of the line */ - tmp_block[temp_dim]=0; - offset[temp_dim]=mem_space->select.sel_info.hslab.diminfo[temp_dim].start+mem_space->select.offset[temp_dim]; - - /* Re-compute the initial buffer offset */ - for(i=0,buf_off=0; i<ndims; i++) - buf_off+=offset[i]*slab[i]; - } - } /* end else */ + } } /* end else */ /* Decrement dimension count */ @@ -2768,6 +2821,9 @@ printf("%s: buf_off=%u, actual_bytes=%u\n",FUNC,(unsigned)buf_off,(int)actual_by HDmemcpy(mem_iter->hyp.pos, offset, ndims*sizeof(hssize_t)); } /* end if */ + /* Decrement the number of elements left in selection */ + mem_iter->hyp.elmt_left-=num_write; + FUNC_LEAVE (num_write); } /* end H5S_hyper_mwrite_opt() */ |