diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/H5FDfphdf5.c | 181 | ||||
| -rw-r--r-- | src/H5FDfphdf5.h | 2 |
2 files changed, 68 insertions, 115 deletions
diff --git a/src/H5FDfphdf5.c b/src/H5FDfphdf5.c index e83ba78..23ef405 100644 --- a/src/H5FDfphdf5.c +++ b/src/H5FDfphdf5.c @@ -136,9 +136,10 @@ static const H5FD_class_t H5FD_fphdf5_g = { static int interface_initialize_g = 0; -static herr_t H5FD_fphdf5_write_finish(H5FD_fphdf5_t *file, - unsigned use_view_this_time, - int bytes_written, int size); +/* + * The view is set to this value + */ +static char H5FD_mpio_native[] = "native"; /* ======== Temporary, Local data transfer properties ======== */ /* @@ -1109,10 +1110,8 @@ H5FD_fphdf5_read(H5FD_t *_file, H5FD_mem_t mem_type, hid_t dxpl_id, mpi_off = 0; /* Set the file view when we are using MPI derived types */ - - /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if ((mrc = MPI_File_set_view(file->f, (MPI_Offset)mpi_disp, MPI_BYTE, - file_type, (char*)"native", + file_type, H5FD_mpio_native, file->info)) != MPI_SUCCESS) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mrc); } else { @@ -1211,9 +1210,8 @@ HDfprintf(stderr, "%s:%d: Metadata cache read failed!\n", FUNC, __LINE__); * Reset the file view when we used MPI derived types */ if (use_view_this_time) - /*OKAY: CAST DISCARDS CONST QUALIFIER*/ if ((mrc = MPI_File_set_view(file->f, (MPI_Offset)0, MPI_BYTE, MPI_BYTE, - (char*)"native", file->info)) != MPI_SUCCESS) + H5FD_mpio_native, file->info)) != MPI_SUCCESS) HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mrc); finished_read: @@ -1267,12 +1265,9 @@ H5FD_fphdf5_write(H5FD_t *_file, H5FD_mem_t mem_type, hid_t dxpl_id, { H5FD_fphdf5_t *file = (H5FD_fphdf5_t*)_file; MPI_Offset mpi_off; - MPI_Offset mpi_disp; - MPI_Datatype buf_type; - MPI_Datatype file_type; int size_i; int bytes_written; - unsigned use_view_this_time = 0; + unsigned dumping = 0; H5P_genplist_t *plist; herr_t ret_value = SUCCEED; @@ -1301,50 +1296,6 @@ H5FD_fphdf5_write(H5FD_t *_file, H5FD_mem_t mem_type, hid_t dxpl_id, if ((plist = H5I_object(dxpl_id)) == NULL) HGOTO_ERROR(H5E_ARGS, H5E_BADTYPE, FAIL, "not a file access property list"); - /* - * Set up for a fancy xfer using complex types, or single byte block. - * We wouldn't need to rely on the use_view field if MPI semantics - * allowed us to test that btype == ftype == MPI_BYTE (or even - * MPI_TYPE_NULL, which could mean "use MPI_BYTE" by convention). - */ - if (H5P_exist_plist(plist, H5FD_FPHDF5_XFER_USE_VIEW_NAME) > 0) - if (H5P_get(plist, H5FD_FPHDF5_XFER_USE_VIEW_NAME, &use_view_this_time) < 0) - HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property"); - - if (use_view_this_time) { - int mrc; - - /* prepare for a full-blown xfer using btype, ftype, and disp */ - if (H5P_get(plist, H5FD_FPHDF5_XFER_MEM_MPI_TYPE_NAME, &buf_type) < 0) - HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property"); - - if (H5P_get(plist, H5FD_FPHDF5_XFER_FILE_MPI_TYPE_NAME, &file_type) < 0) - HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property"); - - /* - * When using types, use the address as the displacement for - * MPI_File_set_view and reset the address for the read to zero - */ - mpi_disp = mpi_off; - mpi_off = 0; - - /* Set the file view when we are using MPI derived types */ - - /*OKAY: CAST DISCARDS CONST QUALIFIER*/ - if ((mrc = MPI_File_set_view(file->f, mpi_disp, MPI_BYTE, - file_type, (char*)"native", - file->info)) != MPI_SUCCESS) - HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mrc); - } else { - /* - * Prepare for a simple xfer of a contiguous block of bytes. The - * btype, ftype, and disp fields are not used. - */ - buf_type = MPI_BYTE; - file_type = MPI_BYTE; - mpi_disp = 0; /* mpi_off is already set */ - } - /* Metadata specific actions */ if (mem_type != H5FD_MEM_DRAW) { unsigned block_before_meta_write = 0; @@ -1367,8 +1318,15 @@ H5FD_fphdf5_write(H5FD_t *_file, H5FD_mem_t mem_type, hid_t dxpl_id, HMPI_GOTO_ERROR(FAIL, "MPI_Barrier failed", mrc); } - /* If metadata, write to the metadata cache */ - if (mem_type != H5FD_MEM_DRAW) { + if (H5P_exist_plist(plist, H5FD_FPHDF5_XFER_DUMPING_METADATA) > 0) + if (H5P_get(plist, H5FD_FPHDF5_XFER_DUMPING_METADATA, &dumping) < 0) + HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property"); + + /* + * If metadata, write to the metadata cache but only if we're not + * dumping the data from the SAP... + */ + if (mem_type != H5FD_MEM_DRAW && !dumping) { unsigned req_id; H5FP_status_t sap_status; @@ -1382,8 +1340,13 @@ HDfprintf(stderr, "%s:%d: Couldn't write metadata to SAP (%d)\n", FUNC, __LINE__ switch (sap_status) { case H5FP_STATUS_OK: /* WAH-HOO! We've written it! We can leave now */ - ret_value = H5FD_fphdf5_write_finish(file, use_view_this_time, - bytes_written, size_i); + + /* Check for write failure */ + if (bytes_written < 0 || bytes_written > size_i) + HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file write failed"); + + /* Forget the EOF value (see H5FD_fphdf5_get_eof()) */ + file->eof = HADDR_UNDEF; HGOTO_DONE(ret_value); case H5FP_STATUS_DUMPING_FAILED: case H5FP_STATUS_FILE_CLOSING: @@ -1397,11 +1360,7 @@ HDfprintf(stderr, "%s:%d: Couldn't write metadata to SAP (%d)\n", FUNC, __LINE__ } /* FIXME: Should I check this return value or just pass it on out? */ - ret_value = H5FD_fphdf5_write_real(_file, dxpl_id, - file_type, - buf_type, - mpi_off, - size_i, buf); + ret_value = H5FD_fphdf5_write_real(_file, dxpl_id, mpi_off, size_i, buf); done: FUNC_LEAVE_NOAPI(ret_value); @@ -1421,23 +1380,22 @@ done: *------------------------------------------------------------------------- */ herr_t -H5FD_fphdf5_write_real(H5FD_t *_file, hid_t dxpl_id, - MPI_Datatype UNUSED file_type, MPI_Datatype buf_type, - MPI_Offset mpi_off, int size, +H5FD_fphdf5_write_real(H5FD_t *_file, hid_t dxpl_id, MPI_Offset mpi_off, int size, const void *buf) { H5FD_fphdf5_t *file = (H5FD_fphdf5_t*)_file; MPI_Status status; + MPI_Datatype buf_type; + MPI_Datatype file_type; + MPI_Offset mpi_disp; int mrc; -#ifdef H5_HAVE_MPI_GET_COUNT /* Bill and Albert's kludge */ int bytes_written; -#endif /* H5_HAVE_MPI_GET_COUNT */ unsigned use_view_this_time = 0; H5P_genplist_t *plist; H5FD_mpio_xfer_t xfer_mode = H5FD_MPIO_INDEPENDENT; herr_t ret_value = SUCCEED; - FUNC_ENTER_NOAPI(H5FD_fphdf5_write, FAIL); + FUNC_ENTER_NOAPI(H5FD_fphdf5_write_real, FAIL); /* check args */ assert(file); @@ -1465,6 +1423,37 @@ H5FD_fphdf5_write_real(H5FD_t *_file, hid_t dxpl_id, if (H5P_get(plist, H5FD_FPHDF5_XFER_USE_VIEW_NAME, &use_view_this_time) < 0) HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property"); + if (use_view_this_time) { + /* Prepare for a full-blown xfer using btype, ftype, and disp */ + if (H5P_get(plist, H5FD_FPHDF5_XFER_MEM_MPI_TYPE_NAME, &buf_type) < 0) + HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property"); + + if (H5P_get(plist, H5FD_FPHDF5_XFER_FILE_MPI_TYPE_NAME, &file_type) < 0) + HGOTO_ERROR(H5E_PLIST, H5E_CANTGET, FAIL, "can't get MPI-I/O type property"); + + /* + * When using types, use the address as the displacement for + * MPI_File_set_view and reset the address for the read to zero + */ + mpi_disp = mpi_off; + mpi_off = 0; + + /* Set the file view when we are using MPI derived types */ + if ((mrc = MPI_File_set_view(file->f, mpi_disp, MPI_BYTE, + file_type, H5FD_mpio_native, + file->info)) != MPI_SUCCESS) + HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mrc); + } else { + /* + * Prepare for a simple xfer of a contiguous block of bytes. The + * btype, ftype, and disp fields are not used. + */ + buf_type = MPI_BYTE; + file_type = MPI_BYTE; + mpi_disp = 0; /* mpi_off is already set */ + } + + if (H5P_get_driver(plist) == H5FD_FPHDF5) /* Get the transfer mode */ xfer_mode = H5P_peek_unsigned(plist, H5D_XFER_IO_XFER_MODE_NAME); @@ -1521,57 +1510,23 @@ H5FD_fphdf5_write_real(H5FD_t *_file, hid_t dxpl_id, } #endif /* H5_HAVE_MPI_GET_COUNT */ + /* Reset the file view when we used MPI derived types */ + if (use_view_this_time) + if ((mrc = MPI_File_set_view(file->f, (MPI_Offset)0, MPI_BYTE, MPI_BYTE, + H5FD_mpio_native, file->info)) != MPI_SUCCESS) + HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mrc); + /* * MPI_Get_count incorrectly returns negative count; fake a complete * write (use size for both parameters). */ - ret_value = H5FD_fphdf5_write_finish(file, use_view_this_time, size, size); - -done: - FUNC_LEAVE_NOAPI(ret_value); -} - - -/*------------------------------------------------------------------------- - * Function: H5FD_fphdf5_write_finish - * Purpose: Perform a couple of checks on the number of bytes read - * and set the view, if necessary. - * Return: Success: SUCCEED - * Failure: FAIL - * Programmer: Bill Wendling - * 12. February 2003 - * Modifications: - *------------------------------------------------------------------------- - */ -static herr_t -H5FD_fphdf5_write_finish(H5FD_fphdf5_t *file, unsigned use_view_this_time, - int bytes_written, int size) -{ - int ret_value = SUCCEED; - - FUNC_ENTER_NOAPI(H5FD_fphdf5_write_finish, FAIL); - - /* check args */ - assert(file); - - /* - * Reset the file view when we used MPI derived types - */ - if (use_view_this_time) { - int mrc; - - /*OKAY: CAST DISCARDS CONST QUALIFIER*/ - if ((mrc = MPI_File_set_view(file->f, (MPI_Offset)0, MPI_BYTE, MPI_BYTE, - (char*)"native", - file->info)) != MPI_SUCCESS) - HMPI_GOTO_ERROR(FAIL, "MPI_File_set_view failed", mrc); - } + bytes_written = size; /* Check for write failure */ if (bytes_written < 0 || bytes_written > size) HGOTO_ERROR(H5E_IO, H5E_READERROR, FAIL, "file write failed"); - /* Forget the EOF value (see H5FD_fphdf5_get_eof()) --rpm 1999-08-06 */ + /* Forget the EOF value (see H5FD_fphdf5_get_eof()) */ file->eof = HADDR_UNDEF; done: diff --git a/src/H5FDfphdf5.h b/src/H5FDfphdf5.h index c135220..3f46158 100644 --- a/src/H5FDfphdf5.h +++ b/src/H5FDfphdf5.h @@ -75,8 +75,6 @@ H5_DLL int H5FD_fphdf5_mpi_rank(H5FD_t *_file); H5_DLL int H5FD_fphdf5_mpi_size(H5FD_t *_file); H5_DLL herr_t H5FD_fphdf5_write_real(H5FD_t *_file, hid_t dxpl_id, - MPI_Datatype UNUSED file_type, - MPI_Datatype buf_type, MPI_Offset mpi_off, int size, const void *buf); |