18 files changed, 0 insertions, 1361 deletions
diff --git a/test/API/driver/kwsys/GitSetup/.gitattributes b/test/API/driver/kwsys/GitSetup/.gitattributes
deleted file mode 100644
index e96d1f8..0000000
--- a/test/API/driver/kwsys/GitSetup/.gitattributes
+++ /dev/null
@@ -1,6 +0,0 @@
-.git*            export-ignore
-
-config*          eol=lf         whitespace=indent-with-non-tab
-git-*            eol=lf         whitespace=indent-with-non-tab
-tips             eol=lf         whitespace=indent-with-non-tab
-setup-*          eol=lf         whitespace=indent-with-non-tab
diff --git a/test/API/driver/kwsys/GitSetup/LICENSE b/test/API/driver/kwsys/GitSetup/LICENSE
deleted file mode 100644
index d645695..0000000
--- a/test/API/driver/kwsys/GitSetup/LICENSE
+++ /dev/null
@@ -1,202 +0,0 @@
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
diff --git a/test/API/driver/kwsys/GitSetup/NOTICE b/test/API/driver/kwsys/GitSetup/NOTICE
deleted file mode 100644
index 0d32c02..0000000
--- a/test/API/driver/kwsys/GitSetup/NOTICE
+++ /dev/null
@@ -1,5 +0,0 @@
-Kitware Local Git Setup Scripts
-Copyright 2010-2012 Kitware, Inc.
-
-This product includes software developed at Kitware, Inc.
-(http://www.kitware.com/).
diff --git a/test/API/driver/kwsys/GitSetup/README b/test/API/driver/kwsys/GitSetup/README
deleted file mode 100644
index 2f9f1ec..0000000
--- a/test/API/driver/kwsys/GitSetup/README
+++ /dev/null
@@ -1,87 +0,0 @@
-Kitware Local Git Setup Scripts
-
-
-Introduction
-------------
-
-This is a collection of local Git development setup scripts meant for
-inclusion in project source trees to aid their development workflow.
-Project-specific information needed by the scripts may be configured
-in a "config" file added next to them in the project.
-
-
-Import
-------
-
-A project may import these scripts into their source tree by
-initializing a subtree merge.  Bring up a Git prompt and set the
-current working directory inside a clone of the target project.
-Fetch the "setup" branch from the GitSetup repository:
-
- $ git fetch ../GitSetup setup:setup
-
-Prepare to merge the branch but place the content in a subdirectory.
-Any prefix (with trailing '/') may be chosen so long as it is used
-consistently within a project through the rest of these instructions:
-
- $ git merge -s ours --no-commit setup
- $ git read-tree -u --prefix=Utilities/GitSetup/ setup
-
-Commit the merge with an informative message:
-
- $ git commit
- ------------------------------------------------------------------------
- Merge branch 'setup'
-
- Add Utilities/GitSetup/ directory using subtree merge from
- the general GitSetup repository "setup" branch.
- ------------------------------------------------------------------------
-
-Optionally add to the project ".gitattributes" file the line
-
- /Utilities/GitSetup export-ignore
-
-to exclude the GitSetup directory from inclusion by "git archive"
-since it does not make sense in source tarballs.
-
-
-Configuration
--------------
-
-Read the "Project configuration instructions" comment in each script.
-Add a "config" file next to the scripts with desired configuration
-(optionally copy and modify "config.sample").  For example, to
-configure the "setup-hooks" script:
-
- $ git config -f Utilities/GitSetup/config hooks.url "$url"
-
-where "$url" is the project repository publishing the "hooks" branch.
-When finished, add and commit the configuration file:
-
- $ git add Utilities/GitSetup/config
- $ git commit
-
-
-Update
-------
-
-A project may update these scripts from the GitSetup repository.
-Bring up a Git prompt and set the current working directory inside a
-clone of the target project.  Fetch the "setup" branch from the
-GitSetup repository:
-
- $ git fetch ../GitSetup setup:setup
-
-Merge the "setup" branch into the subtree:
-
- $ git merge -X subtree=Utilities/GitSetup setup
-
-where "Utilities/GitSetup" is the same prefix used during the import
-setup, but without a trailing '/'.
-
-
-License
--------
-
-Distributed under the Apache License 2.0.
-See LICENSE and NOTICE for details.
diff --git a/test/API/driver/kwsys/GitSetup/config b/test/API/driver/kwsys/GitSetup/config
deleted file mode 100644
index cba4c14..0000000
--- a/test/API/driver/kwsys/GitSetup/config
+++ /dev/null
@@ -1,4 +0,0 @@
-[hooks]
-	url = https://gitlab.kitware.com/utils/gitsetup.git
-[upstream]
-	url = https://gitlab.kitware.com/utils/kwsys.git
diff --git a/test/API/driver/kwsys/GitSetup/config.sample b/test/API/driver/kwsys/GitSetup/config.sample
deleted file mode 100644
index eeb468b..0000000
--- a/test/API/driver/kwsys/GitSetup/config.sample
+++ /dev/null
@@ -1,32 +0,0 @@
-# Kitware Local Git Setup Scripts - Sample Project Configuration
-#
-# Copy to "config" and edit as necessary.
-
-[hooks]
-	url = http://public.kitware.com/GitSetup.git
-	#branch = hooks
-
-[ssh]
-	host = public.kitware.com
-	key = id_git_public
-	request-url = https://www.kitware.com/Admin/SendPassword.cgi
-
-[stage]
-	#url = git://public.kitware.com/stage/Project.git
-	#pushurl = git@public.kitware.com:stage/Project.git
-
-[gerrit]
-	#project = Project
-	site = http://review.source.kitware.com
-	# pushurl placeholder "$username" is literal
-	pushurl = $username@review.source.kitware.com:Project
-
-[upstream]
-	url = git://public.kitware.com/Project.git
-
-[gitlab]
-	host = gitlab.kitware.com
-	group-path = group
-	group-name = Group
-	project-path = project
-	project-name = Project
diff --git a/test/API/driver/kwsys/GitSetup/git-gerrit-push b/test/API/driver/kwsys/GitSetup/git-gerrit-push
deleted file mode 100644
index b46f753..0000000
--- a/test/API/driver/kwsys/GitSetup/git-gerrit-push
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-USAGE="[<remote>] [--no-topic] [--dry-run] [--]"
-OPTIONS_SPEC=
-SUBDIRECTORY_OK=Yes
-. "$(git --exec-path)/git-sh-setup"
-
-#-----------------------------------------------------------------------------
-
-remote=''
-refspecs=''
-no_topic=''
-dry_run=''
-
-# Parse the command line options.
-while test $# != 0; do
-	case "$1" in
-		--no-topic) no_topic=1 ;;
-		--dry-run)  dry_run=--dry-run ;;
-		--) shift; break ;;
-		-*) usage ;;
-		*) test -z "$remote" || usage ; remote="$1" ;;
-	esac
-	shift
-done
-test $# = 0 || usage
-
-# Default remote.
-test -n "$remote" || remote="gerrit"
-
-if test -z "$no_topic"; then
-	# Identify and validate the topic branch name.
-	head="$(git symbolic-ref HEAD)" && topic="${head#refs/heads/}" || topic=''
-	if test -z "$topic" -o "$topic" = "master"; then
-		die 'Please name your topic:
-		git checkout -b descriptive-name'
-	fi
-	# The topic branch will be pushed by name.
-	refspecs="HEAD:refs/for/master/$topic $refspecs"
-fi
-
-# Fetch the current upstream master branch head.
-# This helps computation of a minimal pack to push.
-echo "Fetching $remote master"
-fetch_out=$(git fetch "$remote" master 2>&1) || die "$fetch_out"
-
-# Exit early if we have nothing to push.
-if test -z "$refspecs"; then
-	echo 'Nothing to push!'
-	exit 0
-fi
-
-# Push.  Save output and exit code.
-echo "Pushing to $remote"
-push_stdout=$(git push --porcelain $dry_run "$remote" $refspecs); push_exit=$?
-echo "$push_stdout"
-
-# Reproduce the push exit code.
-exit $push_exit
diff --git a/test/API/driver/kwsys/GitSetup/git-gitlab-push b/test/API/driver/kwsys/GitSetup/git-gitlab-push
deleted file mode 100644
index 768f853..0000000
--- a/test/API/driver/kwsys/GitSetup/git-gitlab-push
+++ /dev/null
@@ -1,177 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-USAGE='[<remote>] [<options>...] [--]
-
-OPTIONS
-
---dry-run
-    Show what would be pushed without actually updating the destination
-
--f,--force
-    Force-push the topic HEAD to rewrite the destination branch
-
---no-default
-    Do not push the default branch (e.g. master)
-
---no-topic
-    Do not push the topic HEAD.
-'
-OPTIONS_SPEC=
-SUBDIRECTORY_OK=Yes
-. "$(git --exec-path)/git-sh-setup"
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-# Load the project configuration.
-gitlab_upstream='' &&
-gitlab_configured='' &&
-config="${BASH_SOURCE%/*}/config" &&
-protocol=$(git config -f "$config" --get gitlab.protocol ||
-	   echo "https") &&
-host=$(git config -f "$config" --get gitlab.host) &&
-site=$(git config -f "$config" --get gitlab.site ||
-       echo "$protocol://$host") &&
-group_path=$(git config -f "$config" --get gitlab.group-path) &&
-project_path=$(git config -f "$config" --get gitlab.project-path) &&
-gitlab_upstream="$site/$group_path/$project_path.git" &&
-gitlab_pushurl=$(git config --get remote.gitlab.pushurl ||
-		 git config --get remote.gitlab.url) &&
-gitlab_configured=1
-
-#-----------------------------------------------------------------------------
-
-remote=''
-refspecs=''
-force=''
-lease=false
-lease_flag=''
-no_topic=''
-no_default=''
-dry_run=''
-
-# Parse the command line options.
-while test $# != 0; do
-	case "$1" in
-		-f|--force)   force='+'; lease=true ;;
-		--no-topic)   no_topic=1 ;;
-		--dry-run)    dry_run=--dry-run ;;
-		--no-default) no_default=1 ;;
-		--) shift; break ;;
-		-*) usage ;;
-		*) test -z "$remote" || usage ; remote="$1" ;;
-	esac
-	shift
-done
-test $# = 0 || usage
-
-# Default remote.
-test -n "$remote" || remote="gitlab"
-
-if test -z "$no_topic"; then
-	# Identify and validate the topic branch name.
-	head="$(git symbolic-ref HEAD)" && topic="${head#refs/heads/}" || topic=''
-	if test -z "$topic" -o "$topic" = "master"; then
-		die 'Please name your topic:
-		git checkout -b descriptive-name'
-	fi
-
-	if $lease; then
-		have_ref=false
-		remoteref="refs/remotes/$remote/$topic"
-		if git rev-parse --verify -q "$remoteref"; then
-			have_ref=true
-		else
-			die "It seems that a local ref for the branch is
-missing; forcing a push is dangerous and may overwrite
-previous work.  Fetch from the $remote remote first or
-push without '-f' or '--force'."
-		fi
-
-		have_lease_flag=false
-		if git push -h | egrep-q -e '--force-with-lease'; then
-			have_lease_flag=true
-		fi
-
-		if $have_lease_flag && $have_ref; then
-			# Set the lease flag.
-			lease_flag="--force-with-lease=$topic:$remoteref"
-			# Clear the force string.
-			force=''
-		fi
-	fi
-
-	# The topic branch will be pushed by name.
-	refspecs="${force}HEAD:refs/heads/$topic $refspecs"
-fi
-
-# Fetch the current remote master branch head.
-# This helps computation of a minimal pack to push.
-echo "Fetching $remote master"
-fetch_out=$(git fetch "$remote" master 2>&1) || die "$fetch_out"
-gitlab_head=$(git rev-parse FETCH_HEAD) || exit
-
-# Fetch the current upstream master branch head.
-if origin_fetchurl=$(git config --get remote.origin.url) &&
-   test "$origin_fetchurl" = "$gitlab_upstream"; then
-	upstream_remote='origin'
-else
-	upstream_remote="$gitlab_upstream"
-fi
-echo "Fetching $upstream_remote master"
-fetch_out=$(git fetch "$upstream_remote" master 2>&1) || die "$fetch_out"
-upstream_head=$(git rev-parse FETCH_HEAD) || exit
-
-# Add a refspec to keep the remote master up to date if possible.
-if test -z "$no_default" &&
-   base=$(git merge-base "$gitlab_head" "$upstream_head") &&
-   test "$base" = "$gitlab_head"; then
-	refspecs="$upstream_head:refs/heads/master $refspecs"
-fi
-
-# Exit early if we have nothing to push.
-if test -z "$refspecs"; then
-	echo 'Nothing to push!'
-	exit 0
-fi
-
-# Push.  Save output and exit code.
-echo "Pushing to $remote"
-push_config='-c advice.pushUpdateRejected=false'
-push_stdout=$(git $push_config push $lease_flag --porcelain $dry_run "$remote" $refspecs); push_exit=$?
-echo "$push_stdout"
-
-if test "$push_exit" -ne 0 && test -z "$force"; then
-	# Advise the user to fetch if needed.
-	if echo "$push_stdout" | egrep-q 'stale info'; then
-		echo "
-You have pushed to your branch from another machine; you may be overwriting
-commits unintentionally.  Fetch from the $remote remote and check that you are
-not pushing an outdated branch."
-	fi
-
-	# Advise the user to force-push if needed.
-	if echo "$push_stdout" | egrep-q 'non-fast-forward'; then
-		echo '
-Add "-f" or "--force" to push a rewritten topic.'
-	fi
-fi
-
-# Reproduce the push exit code.
-exit $push_exit
diff --git a/test/API/driver/kwsys/GitSetup/pre-commit b/test/API/driver/kwsys/GitSetup/pre-commit
deleted file mode 100644
index 1f1d3f5..0000000
--- a/test/API/driver/kwsys/GitSetup/pre-commit
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/usr/bin/env bash
-
-egrep-q() {
-  egrep "$@" >/dev/null 2>/dev/null
-}
-
-die() {
-  echo 'pre-commit hook failure' 1>&2
-  echo '-----------------------' 1>&2
-  echo '' 1>&2
-  echo "$@" 1>&2
-  exit 1
-}
-
-#-----------------------------------------------------------------------------
-
-# Check that developmer setup is up-to-date.
-lastSetupForDevelopment=$(git config --get hooks.SetupForDevelopment || echo 0)
-eval $(grep '^SetupForDevelopment_VERSION=' "${BASH_SOURCE%/*}/../SetupForDevelopment.sh")
-test -n "$SetupForDevelopment_VERSION" || SetupForDevelopment_VERSION=0
-if test $lastSetupForDevelopment -lt $SetupForDevelopment_VERSION; then
-  die 'Developer setup in this work tree is out of date.  Please re-run
-
-  ./SetupForDevelopment.sh
-'
-fi
diff --git a/test/API/driver/kwsys/GitSetup/setup-aliases b/test/API/driver/kwsys/GitSetup/setup-aliases
deleted file mode 100644
index 98810ad..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-aliases
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/usr/bin/env bash
-echo "Adding 'git prepush' alias" &&
-git config alias.prepush 'log --graph --stat origin/master..' &&
-gerrit_disabled="KWSys no longer uses Gerrit.  Please use GitLab." &&
-git config alias.gerrit-push '!sh -c "echo '"${gerrit_disabled}"'"' &&
-true
diff --git a/test/API/driver/kwsys/GitSetup/setup-gerrit b/test/API/driver/kwsys/GitSetup/setup-gerrit
deleted file mode 100644
index 6d46e3c..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-gerrit
+++ /dev/null
@@ -1,147 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the local Git repository to push to
-# a Gerrit Code Review instance for this project.
-
-# Project configuration instructions:
-#
-# - Run a Gerrit Code Review server
-#
-# - Populate adjacent "config" file with:
-#    gerrit.site = Top Gerrit URL (not project-specific)
-#    gerrit.project = Name of project in Gerrit
-#    gerrit.pushurl = Review site push URL with "$username" placeholder
-#    gerrit.remote = Gerrit remote name, if not "gerrit"
-#    gerrit.url = Gerrit project URL, if not "$site/p/$project"
-#                 optionally with "$username" placeholder
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-site=$(git config -f config --get gerrit.site) &&
-project=$(git config -f config --get gerrit.project) &&
-remote=$(git config -f config --get gerrit.remote ||
-	 echo "gerrit") &&
-fetchurl_=$(git config -f config --get gerrit.url ||
-	    echo "$site/p/$project") &&
-pushurl_=$(git config -f config --get gerrit.pushurl ||
-	   git config -f config --get gerrit.url) ||
-die 'This project is not configured to use Gerrit.'
-
-# Get current gerrit push URL.
-pushurl=$(git config --get remote."$remote".pushurl ||
-	  git config --get remote."$remote".url || echo '') &&
-
-# Tell user about current configuration.
-if test -n "$pushurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to push to
-
-  '"$pushurl"'
-' &&
-	read -ep 'Reconfigure Gerrit? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	echo 'Remote "'"$remote"'" is not yet configured.
-
-'"$project"' changes must be pushed to our Gerrit Code Review site:
-
-  '"$site/p/$project"'
-
-Register a Gerrit account and select a username (used below).
-You will need an OpenID:
-
-  http://openid.net/get-an-openid/
-' &&
-	read -ep 'Configure Gerrit? [Y/n]: ' ans &&
-	if [ "$ans" == "n" ] || [ "$ans" == "N" ]; then
-		exit 0
-	else
-		setup=1
-	fi
-fi &&
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	echo 'Sign-in to Gerrit to get/set your username at
-
-  '"$site"'/#/settings
-
-Add your SSH public keys at
-
-  '"$site"'/#/settings/ssh-keys
-' &&
-	read -ep "Gerrit username? [$USER]: " gu &&
-	if test -z "$gu"; then
-		gu="$USER"
-	fi &&
-	fetchurl="${fetchurl_/\$username/$gu}" &&
-	if test -z "$pushurl"; then
-		git remote add "$remote" "$fetchurl"
-	else
-		git config remote."$remote".url "$fetchurl"
-	fi &&
-	pushurl="${pushurl_/\$username/$gu}" &&
-	if test "$pushurl" != "$fetchurl"; then
-		git config remote."$remote".pushurl "$pushurl"
-	fi &&
-	echo 'Remote "'"$remote"'" is now configured to push to
-
-  '"$pushurl"'
-'
-fi &&
-
-# Optionally test Gerrit access.
-if test -n "$pushurl"; then
-	read -ep 'Test access to Gerrit (SSH)? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		echo -n 'Testing Gerrit access by SSH...'
-		if git ls-remote --heads "$pushurl" >/dev/null; then
-			echo 'passed.'
-		else
-			echo 'failed.' &&
-			die 'Could not access Gerrit.  Add your SSH public keys at
-
-  '"$site"'/#/settings/ssh-keys
-'
-		fi
-	fi
-fi &&
-
-# Set up GerritId hook.
-hook=$(git config --get hooks.GerritId || echo '') &&
-if test -z "$hook"; then
-	echo '
-Enabling GerritId hook to add a "Change-Id" footer to commit
-messages for interaction with Gerrit.  Run
-
-  git config hooks.GerritId false
-
-to disable this feature (but you will be on your own).' &&
-	git config hooks.GerritId true
-else
-	echo 'GerritId hook already configured to "'"$hook"'".'
-fi
diff --git a/test/API/driver/kwsys/GitSetup/setup-gitlab b/test/API/driver/kwsys/GitSetup/setup-gitlab
deleted file mode 100644
index 9c7574d..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-gitlab
+++ /dev/null
@@ -1,140 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the local Git repository to push to
-# a personal fork for this project in GitLab.
-
-# Project configuration instructions:
-#
-# - Run a GitLab server
-#
-# - Populate adjacent "config" file with:
-#    gitlab.protocol = Top GitLab protocol, if not 'https'
-#    gitlab.host = Top GitLab fully qualified host name
-#    gitlab.site = Top GitLab URL, if not "<protocol>://<host>"
-#    gitlab.group-name = Name of group containing project in GitLab
-#    gitlab.group-path = Path of group containing project in GitLab
-#    gitlab.project-name = Name of project within GitLab group
-#    gitlab.project-path = Path of project within GitLab group
-#    gitlab.url = GitLab push URL with "$username" placeholder,
-#                 if not "<site>/$username/<project-path>.git"
-#    gitlab.pushurl = GitLab push URL with "$username" placeholder,
-#                     if not "git@<host>:$username/<project-path>.git"
-#    gitlab.remote = GitLab remote name, if not "gitlab"
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-protocol=$(git config -f config --get gitlab.protocol ||
-	   echo "https") &&
-host=$(git config -f config --get gitlab.host) &&
-site=$(git config -f config --get gitlab.site ||
-       echo "$protocol://$host") &&
-group_path=$(git config -f config --get gitlab.group-path) &&
-group_name=$(git config -f config --get gitlab.group-name) &&
-project_name=$(git config -f config --get gitlab.project-name) &&
-project_path=$(git config -f config --get gitlab.project-path) &&
-pushurl_=$(git config -f config --get gitlab.pushurl ||
-	   echo "git@$host:\$username/$project_path.git") &&
-remote=$(git config -f config --get gitlab.remote ||
-	 echo "gitlab") &&
-fetchurl_=$(git config -f config --get gitlab.url ||
-	    echo "$site/\$username/$project_path.git") ||
-die 'This project is not configured to use GitLab.'
-
-# Get current gitlab push URL.
-pushurl=$(git config --get remote."$remote".pushurl ||
-	  git config --get remote."$remote".url || echo '') &&
-
-# Tell user about current configuration.
-if test -n "$pushurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to push to
-
-  '"$pushurl"'
-' &&
-	read -ep 'Reconfigure GitLab? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	echo 'Remote "'"$remote"'" is not yet configured.
-' &&
-	read -ep 'Configure GitLab to contribute to '"$project_name"'? [Y/n]: ' ans &&
-	if [ "$ans" == "n" ] || [ "$ans" == "N" ]; then
-		exit 0
-	else
-		setup=1
-	fi
-fi &&
-
-setup_instructions='Add your SSH public keys at
-
-  '"$site"'/profile/keys
-
-Then visit the main repository at:
-
-  '"$site/$group_path/$project_path"'
-
-and use the Fork button in the upper right.
-'
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	echo 'Sign-in to GitLab to get/set your username at
-
-  '"$site/profile/account"'
-
-'"$setup_instructions" &&
-	read -ep "GitLab username? [$USER]: " gu &&
-	if test -z "$gu"; then
-		gu="$USER"
-	fi &&
-	fetchurl="${fetchurl_/\$username/$gu}" &&
-	if test -z "$pushurl"; then
-		git remote add "$remote" "$fetchurl"
-	else
-		git config remote."$remote".url "$fetchurl"
-	fi &&
-	pushurl="${pushurl_/\$username/$gu}" &&
-	git config remote."$remote".pushurl "$pushurl" &&
-	echo 'Remote "'"$remote"'" is now configured to push to
-
-  '"$pushurl"'
-'
-fi &&
-
-# Optionally test GitLab access.
-if test -n "$pushurl"; then
-	read -ep 'Test access to GitLab (SSH)? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		echo -n 'Testing GitLab access by SSH...'
-		if git ls-remote --heads "$pushurl" >/dev/null; then
-			echo 'passed.'
-		else
-			echo 'failed.' &&
-			die 'Could not access your GitLab fork of this project.
-'"$setup_instructions"
-		fi
-	fi
-fi
diff --git a/test/API/driver/kwsys/GitSetup/setup-hooks b/test/API/driver/kwsys/GitSetup/setup-hooks
deleted file mode 100644
index ca07712..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-hooks
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up local Git hooks for this project.
-
-# Project configuration instructions:
-#
-# - Publish a "hooks" branch in the project repository such that
-#   clones will have "refs/remotes/origin/hooks".
-#
-# - Populate adjacent "config" file with:
-#    hooks.url    = Repository URL publishing "hooks" branch
-#    hooks.branch = Repository branch instead of "hooks"
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Select a hooks branch.
-if url=$(git config --get hooks.url); then
-	# Fetch hooks from locally configured repository.
-	branch=$(git config hooks.branch || echo hooks)
-elif git for-each-ref refs/remotes/origin/hooks 2>/dev/null |
-     egrep-q 'refs/remotes/origin/hooks$'; then
-	# Use hooks cloned from origin.
-	url=.. && branch=remotes/origin/hooks
-elif url=$(git config -f config --get hooks.url); then
-	# Fetch hooks from project-configured repository.
-	branch=$(git config -f config hooks.branch || echo hooks)
-else
-	die 'This project is not configured to install local hooks.'
-fi &&
-
-# Populate ".git/hooks".
-echo 'Setting up git hooks...' &&
-git_dir=$(git rev-parse --git-dir) &&
-mkdir -p "$git_dir/hooks" &&
-cd "$git_dir/hooks" &&
-if ! test -e .git; then
-	git init -q || die 'Could not run git init for hooks.'
-fi &&
-git fetch -q "$url" "$branch" &&
-git reset -q --hard FETCH_HEAD || die 'Failed to install hooks'
diff --git a/test/API/driver/kwsys/GitSetup/setup-ssh b/test/API/driver/kwsys/GitSetup/setup-ssh
deleted file mode 100644
index 8920a5b..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-ssh
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up ssh push access to the repository host.
-
-# Project configuration instructions:
-#
-# - Populate adjacent "config" file with:
-#    ssh.host = Repository host name
-#    ssh.user = Username on host, if not "git"
-#    ssh.key = Local ssh key name
-#    ssh.request-url = Web page URL to request ssh access
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-host=$(git config -f config --get ssh.host) &&
-user=$(git config -f config --get ssh.user || echo git) &&
-key=$(git config -f config --get ssh.key) &&
-request_url=$(git config -f config --get ssh.request-url) ||
-die 'This project is not configured for ssh push access.'
-
-# Check for existing configuration.
-if test -r ~/.ssh/config &&
-   egrep-q 'Host[= ]'"${host//\./\\.}" ~/.ssh/config; then
-	echo 'Host "'"$host"'" is already in ~/.ssh/config' &&
-	setup= &&
-	question='Test'
-else
-	echo 'Host "'"$host"'" not found in ~/.ssh/config' &&
-	setup=1 &&
-	question='Setup and test'
-fi &&
-
-# Ask the user whether to make changes.
-echo '' &&
-read -ep "${question} push access by ssh to $user@$host? [y/N]: " access &&
-if test "$access" != "y" -a "$access" != "Y"; then
-	exit 0
-fi &&
-
-# Setup host configuration if necessary.
-if test -n "$setup"; then
-	if ! test -d ~/.ssh; then
-		mkdir -p ~/.ssh &&
-		chmod 700 ~/.ssh
-	fi &&
-	if ! test -f ~/.ssh/config; then
-		touch ~/.ssh/config &&
-		chmod 600 ~/.ssh/config
-	fi &&
-	ssh_config='Host='"$host"'
-  IdentityFile ~/.ssh/'"$key" &&
-	echo "Adding to ~/.ssh/config:
-
-$ssh_config
-" &&
-	echo "$ssh_config" >> ~/.ssh/config &&
-	if ! test -e ~/.ssh/"$key"; then
-		if test -f ~/.ssh/id_rsa; then
-			# Take care of the common case.
-			ln -s id_rsa ~/.ssh/"$key"
-			echo '
-Assuming ~/.ssh/id_rsa is the private key corresponding to the public key for
-
-  '"$user@$host"'
-
-If this is incorrect place private key at "~/.ssh/'"$key"'".'
-		else
-			echo '
-Place the private key corresponding to the public key registered for
-
-  '"$user@$host"'
-
-at "~/.ssh/'"$key"'".'
-		fi
-		read -e -n 1 -p 'Press any key to continue...'
-	fi
-fi || exit 1
-
-# Test access configuration.
-echo 'Testing ssh push access to "'"$user@$host"'"...' &&
-if ! ssh "$user@$host" info; then
-	die 'No ssh push access to "'"$user@$host"'".  You may need to request access at
-
-  '"$request_url"'
-'
-fi
diff --git a/test/API/driver/kwsys/GitSetup/setup-stage b/test/API/driver/kwsys/GitSetup/setup-stage
deleted file mode 100644
index ce6ec45..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-stage
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the topic stage for pushing changes.
-
-# Project configuration instructions:
-#
-# - Run a Topic Stage repository next to the main project repository.
-#
-# - Populate adjacent "config" file with:
-#    stage.url = Topic Stage repository URL
-#    stage.pushurl = Topic Stage push URL if not "$url"
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-fetchurl_=$(git config -f config --get stage.url) &&
-pushurl_=$(git config -f config --get stage.pushurl || echo "$fetchurl_") &&
-remote=$(git config -f config --get stage.remote || echo 'stage') ||
-die 'This project is not configured to use a topic stage.'
-
-# Get current stage push URL.
-pushurl=$(git config --get remote."$remote".pushurl ||
-	  git config --get remote."$remote".url || echo '') &&
-
-# Tell user about current configuration.
-if test -n "$pushurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to push to
-
-  '"$pushurl"'
-' &&
-	read -ep 'Reconfigure Topic Stage? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	setup=1
-fi
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	echo 'Setting up the topic stage...' &&
-	fetchurl="${fetchurl_}" &&
-	if test -z "$pushurl"; then
-		git remote add "$remote" "$fetchurl"
-	else
-		git config remote."$remote".url "$fetchurl"
-	fi &&
-	pushurl="${pushurl_}" &&
-	if test "$pushurl" != "$fetchurl"; then
-		git config remote."$remote".pushurl "$pushurl"
-	fi &&
-	echo 'Remote "'"$remote"'" is now configured to push to
-
-  '"$pushurl"'
-'
-fi || die 'Could not configure the topic stage remote.'
diff --git a/test/API/driver/kwsys/GitSetup/setup-upstream b/test/API/driver/kwsys/GitSetup/setup-upstream
deleted file mode 100644
index 92ce1da..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-upstream
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2015 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to set up the local Git repository to use the
-# preferred upstream repository URLs.
-
-# Project configuration instructions:
-#
-# - Populate adjacent "config" file with:
-#    upstream.url = Preferred fetch url for upstream remote
-#    upstream.remote = Preferred name for upstream remote, if not "origin"
-
-die() {
-	echo 1>&2 "$@" ; exit 1
-}
-
-# Make sure we are inside the repository.
-cd "${BASH_SOURCE%/*}" &&
-
-# Load the project configuration.
-url=$(git config -f config --get upstream.url) &&
-remote=$(git config -f config --get upstream.remote ||
-	 echo 'origin') ||
-die 'This project is not configured to use a preferred upstream repository.'
-
-# Get current upstream URLs.
-fetchurl=$(git config --get remote."$remote".url || echo '') &&
-pushurl=$(git config --get remote."$remote".pushurl || echo '') &&
-
-if test "$fetchurl" = "$url"; then
-	echo 'Remote "'"$remote"'" already uses recommended upstream repository.'
-	exit 0
-fi
-
-upstream_recommend='
-We recommended configuring the "'"$remote"'" remote to fetch from upstream at
-
-  '"$url"'
-'
-
-# Tell user about current configuration.
-if test -n "$fetchurl"; then
-	echo 'Remote "'"$remote"'" is currently configured to fetch from
-
-  '"$fetchurl"'
-' &&
-	if test -n "$pushurl"; then
-		echo 'and push to
-
-  '"$pushurl"
-	fi &&
-	echo "$upstream_recommend" &&
-	if test -n "$pushurl"; then
-		echo 'and to never push to it directly.
-'
-	fi &&
-
-	read -ep 'Reconfigure "'"$remote"'" remote as recommended? [y/N]: ' ans &&
-	if [ "$ans" == "y" ] || [ "$ans" == "Y" ]; then
-		setup=1
-	else
-		setup=''
-	fi
-else
-	echo 'Remote "'"$remote"'" is not yet configured.' &&
-	echo "$upstream_recommend" &&
-	read -ep 'Configure "'"$remote"'" remote as recommended? [Y/n]: ' ans &&
-	if [ "$ans" == "n" ] || [ "$ans" == "N" ]; then
-		exit 0
-	else
-		setup=1
-	fi
-fi &&
-
-# Perform setup if necessary.
-if test -n "$setup"; then
-	if test -z "$fetchurl"; then
-		git remote add "$remote" "$url"
-	else
-		git config remote."$remote".url "$url" &&
-		if old=$(git config --get remote."$remote".pushurl); then
-			git config --unset remote."$remote".pushurl ||
-			echo 'Warning: failed to unset remote.'"$remote"'.pushurl'
-		fi
-	fi &&
-	echo 'Remote "'"$remote"'" is now configured to fetch from
-
-  '"$url"'
-'
-fi
diff --git a/test/API/driver/kwsys/GitSetup/setup-user b/test/API/driver/kwsys/GitSetup/setup-user
deleted file mode 100644
index 1af439c..0000000
--- a/test/API/driver/kwsys/GitSetup/setup-user
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# Run this script to configure Git user info in this repository.
-
-# Project configuration instructions: NONE
-
-for (( ; ; )); do
-	user_name=$(git config user.name || echo '') &&
-	user_email=$(git config user.email || echo '') &&
-	if test -n "$user_name" -a -n "$user_email"; then
-		echo 'Your commits will record as Author:
-
-  '"$user_name <$user_email>"'
-' &&
-		read -ep 'Is the author name and email address above correct? [Y/n] ' correct &&
-		if test "$correct" != "n" -a "$correct" != "N"; then
-			break
-		fi
-	fi &&
-	read -ep 'Enter your full name e.g. "John Doe": ' name &&
-	read -ep 'Enter your email address e.g. "john@gmail.com": ' email &&
-	git config user.name "$name" &&
-	git config user.email "$email"
-done
diff --git a/test/API/driver/kwsys/GitSetup/tips b/test/API/driver/kwsys/GitSetup/tips
deleted file mode 100644
index 784e1ed..0000000
--- a/test/API/driver/kwsys/GitSetup/tips
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/usr/bin/env bash
-#=============================================================================
-# Copyright 2010-2012 Kitware, Inc.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#=============================================================================
-
-# This script makes optional suggestions for working with Git.
-
-# Project configuration instructions: NONE
-
-egrep-q() {
-	egrep "$@" >/dev/null 2>/dev/null
-}
-
-# Suggest color configuration.
-if test -z "$(git config --get color.ui)"; then
-	echo '
-One may enable color output from Git commands with
-
-  git config --global color.ui auto
-'
-fi
-
-# Suggest bash completion.
-if ! bash -i -c 'echo $PS1' | egrep-q '__git_ps1'; then
-	echo '
-A dynamic, informative Git shell prompt can be obtained by sourcing
-the git bash-completion script in your "~/.bashrc".  Set the PS1
-environmental variable as suggested in the comments at the top of the
-bash-completion script.  You may need to install the bash-completion
-package from your distribution to obtain it.
-'
-fi
-
-# Suggest merge tool.
-if test -z "$(git config --get merge.tool)"; then
-	echo '
-One may configure Git to load a merge tool with
-
-  git config merge.tool <toolname>
-
-See "git help mergetool" for more information.
-'
-fi