diff options
Diffstat (limited to 'test/cross_read.c')
| -rw-r--r-- | test/cross_read.c | 560 |
1 files changed, 257 insertions, 303 deletions
diff --git a/test/cross_read.c b/test/cross_read.c index 308a0c1..c1073cb 100644 --- a/test/cross_read.c +++ b/test/cross_read.c @@ -1,20 +1,17 @@ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * - * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * - * the files COPYING and Copyright.html. COPYING can be found at the root * - * of the source code distribution tree; Copyright.html can be found at the * - * root level of an installed copy of the electronic HDF5 document set and * - * is linked from the top-level documents page. It can also be found at * - * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * - * access to either file, you may request a copy from help@hdfgroup.org. * + * the COPYING file, which can be found at the root of the source code * + * distribution tree, or in https://www.hdfgroup.org/licenses. * + * If you do not have access to either file, you may request a copy from * + * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* - * Programmer: Raymond Lu <slu@ncsa.uiuc.edu> + * Programmer: Raymond Lu * Thursday, March 23, 2006 * * Purpose: Check if floating-point data created on big-endian and @@ -24,47 +21,45 @@ #include "h5test.h" #include "H5srcdir.h" -const char *FILENAME[] = { - "vms_data", - "le_data", - "be_data", - NULL -}; - -#define DATASETNAME "Array_le" -#define DATASETNAME1 "Array_be" -#define DATASETNAME2 "Scale_offset_float_data_le" -#define DATASETNAME3 "Scale_offset_float_data_be" -#define DATASETNAME4 "Scale_offset_double_data_le" -#define DATASETNAME5 "Scale_offset_double_data_be" -#define DATASETNAME6 "Scale_offset_char_data_le" -#define DATASETNAME7 "Scale_offset_char_data_be" -#define DATASETNAME8 "Scale_offset_short_data_le" -#define DATASETNAME9 "Scale_offset_short_data_be" -#define DATASETNAME10 "Scale_offset_int_data_le" -#define DATASETNAME11 "Scale_offset_int_data_be" -#define DATASETNAME12 "Scale_offset_long_long_data_le" -#define DATASETNAME13 "Scale_offset_long_long_data_be" - -#define DATASETNAME14 "Fletcher_float_data_le" -#define DATASETNAME15 "Fletcher_float_data_be" -#define DATASETNAME16 "Deflate_float_data_le" -#define DATASETNAME17 "Deflate_float_data_be" -#define DATASETNAME18 "Szip_float_data_le" -#define DATASETNAME19 "Szip_float_data_be" -#define DATASETNAME20 "Shuffle_float_data_le" -#define DATASETNAME21 "Shuffle_float_data_be" -#define DATASETNAME22 "Nbit_float_data_le" -#define DATASETNAME23 "Nbit_float_data_be" - -#define NX 6 -#define NY 6 - - +const char *FILENAME[] = {"vms_data", "le_data", "be_data", NULL}; + +#define DATASETNAME "Array_le" +#define DATASETNAME1 "Array_be" +#define DATASETNAME2 "Scale_offset_float_data_le" +#define DATASETNAME3 "Scale_offset_float_data_be" +#define DATASETNAME4 "Scale_offset_double_data_le" +#define DATASETNAME5 "Scale_offset_double_data_be" +#define DATASETNAME6 "Scale_offset_char_data_le" +#define DATASETNAME7 "Scale_offset_char_data_be" +#define DATASETNAME8 "Scale_offset_short_data_le" +#define DATASETNAME9 "Scale_offset_short_data_be" +#define DATASETNAME10 "Scale_offset_int_data_le" +#define DATASETNAME11 "Scale_offset_int_data_be" +#define DATASETNAME12 "Scale_offset_long_long_data_le" +#define DATASETNAME13 "Scale_offset_long_long_data_be" + +#define DATASETNAME14 "Fletcher_float_data_le" +#define DATASETNAME15 "Fletcher_float_data_be" +#ifdef H5_HAVE_FILTER_DEFLATE +#define DATASETNAME16 "Deflate_float_data_le" +#define DATASETNAME17 "Deflate_float_data_be" +#endif +#ifdef H5_HAVE_FILTER_SZIP +#define DATASETNAME18 "Szip_float_data_le" +#define DATASETNAME19 "Szip_float_data_be" +#endif /* H5_HAVE_FILTER_SZIP */ +#define DATASETNAME20 "Shuffle_float_data_le" +#define DATASETNAME21 "Shuffle_float_data_be" +#define DATASETNAME22 "Nbit_float_data_le" +#define DATASETNAME23 "Nbit_float_data_be" + +#define NX 6 +#define NY 6 + /*------------------------------------------------------------------------- - * Function: open_dataset + * Function: check_data_i * - * Purpose: Read and compare the data from a dataset. + * Purpose: Read and compare the integer data from a dataset. * * Return: Success: 0 * Failure: 1 @@ -72,366 +67,325 @@ const char *FILENAME[] = { * Programmer: Raymond Lu * 17 May 2011 * - * Modifications: - * *------------------------------------------------------------------------- */ -static int check_data(const char *dsetname, hid_t fid, hbool_t floating_number) +static int +check_data_i(const char *dsetname, hid_t fid) { - hid_t dataset; /* handles */ - double data_in[NX+1][NY]; /* input buffer */ - double data_out[NX+1][NY]; /* output buffer */ - long long int_data_in[NX+1][NY]; /* input buffer */ - long long int_data_out[NX+1][NY]; /* output buffer */ - int i, j; - unsigned nerrors = 0; - - /* - * Open the regular dataset. + hid_t did = -1; /* dataset ID */ + long long data_in[NX + 1][NY]; /* input buffer */ + long long data_out[NX + 1][NY]; /* output buffer */ + int i, j; /* iterators */ + int nerrors = 0; /* # errors in dataset values */ + + /* Open the dataset. */ + if ((did = H5Dopen2(fid, dsetname, H5P_DEFAULT)) < 0) + FAIL_STACK_ERROR; + + /* Initialization. */ + /* Input (last row is different) */ + for (i = 0; i < NX; i++) + for (j = 0; j < NY; j++) + data_in[i][j] = i + j; + for (i = 0; i < NY; i++) + data_in[NX][i] = -2; + /* Output */ + HDmemset(data_out, 0, (NX + 1) * NY * sizeof(long long)); + + /* Read data from hyperslab in the file into the hyperslab in + * memory and display. */ - if((dataset = H5Dopen2(fid, dsetname, H5P_DEFAULT)) < 0) - TEST_ERROR; + if (H5Dread(did, H5T_NATIVE_LLONG, H5S_ALL, H5S_ALL, H5P_DEFAULT, data_out) < 0) + FAIL_STACK_ERROR; + + /* Check results */ + for (i = 0; i < (NX + 1); i++) + for (j = 0; j < NY; j++) + if (data_out[i][j] != data_in[i][j]) + if (!nerrors++) { + H5_FAILED(); + HDprintf("element [%d][%d] is %lld but should have been %lld\n", (int)i, (int)j, + data_out[i][j], data_in[i][j]); + } /* end if */ + + /* Close/release resources. */ + if (H5Dclose(did) < 0) + FAIL_STACK_ERROR; - /* - * Data and output buffer initialization. - */ - for (j = 0; j < NX; j++) { - for (i = 0; i < NY; i++) { - data_in[j][i] = ((double)(i + j + 1))/3; - data_out[j][i] = 0; - - int_data_in[j][i] = i + j; - int_data_out[j][i] = 0; - } - } - for (i = 0; i < NY; i++) { - data_in[NX][i] = -2.2; - data_out[NX][i] = 0; + /* Failure */ + if (nerrors) { + HDprintf("total of %d errors out of %d elements\n", nerrors, (int)(NX * NY)); + return 1; + } /* end if */ - int_data_in[NX][i] = -2; - int_data_out[NX][i] = 0; - } + PASSED(); + return 0; - /* - * Read data from hyperslab in the file into the hyperslab in - * memory and display. - */ - if(floating_number) { - if(H5Dread(dataset, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, - data_out) < 0) - TEST_ERROR; - - /* Check results */ - for (j=0; j<(NX+1); j++) { - for (i=0; i<NY; i++) { - if (!DBL_REL_EQUAL(data_out[j][i], data_in[j][i], 0.001)) { - if (!nerrors++) { - H5_FAILED(); - printf("element [%d][%d] is %g but should have been %g\n", - j, i, data_out[j][i], data_in[j][i]); - } - } - } - } - } else { - if(H5Dread(dataset, H5T_NATIVE_LLONG, H5S_ALL, H5S_ALL, H5P_DEFAULT, - int_data_out) < 0) - TEST_ERROR; - - /* Check results */ - for (j=0; j<(NX+1); j++) { - for (i=0; i<NY; i++) { - if (int_data_out[j][i] != int_data_in[j][i]) { - if (!nerrors++) { - H5_FAILED(); - printf("element [%d][%d] is %d but should have been %d\n", - j, i, (int)int_data_out[j][i], - (int)int_data_in[j][i]); - } - } - } - } +error: + H5E_BEGIN_TRY + { + H5Dclose(did); } + H5E_END_TRY; + return 1; +} /* end check_data_i() */ - /* - * Close/release resources. +/*------------------------------------------------------------------------- + * Function: check_data_f + * + * Purpose: Read and compare the floating-point data from a dataset. + * + * Return: Success: 0 + * Failure: 1 + * + * Programmer: Raymond Lu + * 17 May 2011 + * + *------------------------------------------------------------------------- + */ +static int +check_data_f(const char *dsetname, hid_t fid) +{ + hid_t did = -1; /* dataset ID */ + double data_in[NX + 1][NY]; /* input buffer */ + double data_out[NX + 1][NY]; /* output buffer */ + int i, j; /* iterators */ + int nerrors = 0; /* # of errors in dataset values */ + + /* Open the dataset. */ + if ((did = H5Dopen2(fid, dsetname, H5P_DEFAULT)) < 0) + FAIL_STACK_ERROR; + + /* Initialization. */ + /* Input (last row is different) */ + for (i = 0; i < NX; i++) + for (j = 0; j < NY; j++) + data_in[i][j] = ((double)(i + j + 1)) / 3.0; + for (i = 0; i < NY; i++) + data_in[NX][i] = -2.2; + /* Output */ + HDmemset(data_out, 0, (NX + 1) * NY * sizeof(double)); + + /* Read data from hyperslab in the file into the hyperslab in + * memory and display. */ - if(H5Dclose(dataset) < 0) - TEST_ERROR + if (H5Dread(did, H5T_NATIVE_DOUBLE, H5S_ALL, H5S_ALL, H5P_DEFAULT, data_out) < 0) + FAIL_STACK_ERROR; + + /* Check results */ + for (i = 0; i < (NX + 1); i++) + for (j = 0; j < NY; j++) + if (!H5_DBL_REL_EQUAL(data_out[i][j], data_in[i][j], 0.001)) + if (!nerrors++) { + H5_FAILED(); + HDprintf("element [%d][%d] is %g but should have been %g\n", (int)i, (int)j, + data_out[i][j], data_in[i][j]); + } /* end if */ + + /* Close/release resources. */ + if (H5Dclose(did) < 0) + FAIL_STACK_ERROR; /* Failure */ if (nerrors) { - printf("total of %d errors out of %d elements\n", nerrors, NX*NY); + HDprintf("total of %d errors out of %d elements\n", nerrors, (int)(NX * NY)); return 1; - } + } /* end if */ PASSED(); return 0; error: - H5E_BEGIN_TRY { - H5Dclose(dataset); - } H5E_END_TRY; + H5E_BEGIN_TRY + { + H5Dclose(did); + } + H5E_END_TRY; return 1; -} +} /* end check_data_f() */ - /*------------------------------------------------------------------------- - * Function: open_dataset + * Function: check_file * * Purpose: Handle each dataset from the data file. * * Return: Success: 0 - * Failure: Number of failures + * Failure: Number of failures * * Programmer: Raymond Lu * 21 January 2011 * - * Modifications: - * *------------------------------------------------------------------------- */ -static int open_dataset(char *fname) +static int +check_file(char *filename) { - const char *pathname = H5_get_srcdir_filename(fname); /* Corrected test file name */ - hid_t file; /* handles */ - unsigned nerrors = 0; - const char *not_supported= " filter is not enabled."; - - /* - * Open the file. - */ - if((file = H5Fopen(pathname, H5F_ACC_RDONLY, H5P_DEFAULT)) < 0) - TEST_ERROR; + const char *pathname = H5_get_srcdir_filename(filename); /* Corrected test file name */ + hid_t fid = -1; /* file ID */ + int nerrors = 0; /* # of datasets with errors */ +#if !defined(H5_HAVE_FILTER_DEFLATE) || !defined(H5_HAVE_FILTER_SZIP) + const char *not_supported = " filter is not enabled."; /* no filter message */ +#endif + + /* Open the file. */ + if ((fid = H5Fopen(pathname, H5F_ACC_RDONLY, H5P_DEFAULT)) < 0) { + nerrors++; + FAIL_STACK_ERROR; + } TESTING("regular dataset of LE DOUBLE"); - nerrors += check_data(DATASETNAME, file, TRUE); + nerrors += check_data_f(DATASETNAME, fid); TESTING("regular dataset of BE DOUBLE"); - nerrors += check_data(DATASETNAME1, file, TRUE); + nerrors += check_data_f(DATASETNAME1, fid); TESTING("dataset of LE FLOAT with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME2, file, TRUE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_f(DATASETNAME2, fid); + TESTING("dataset of BE FLOAT with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME3, file, TRUE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ + nerrors += check_data_f(DATASETNAME3, fid); TESTING("dataset of LE DOUBLE with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME4, file, TRUE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_f(DATASETNAME4, fid); + TESTING("dataset of BE DOUBLE with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME5, file, TRUE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_f(DATASETNAME5, fid); + TESTING("dataset of LE CHAR with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME6, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_i(DATASETNAME6, fid); + TESTING("dataset of BE CHAR with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME7, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_i(DATASETNAME7, fid); + TESTING("dataset of LE SHORT with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME8, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_i(DATASETNAME8, fid); + TESTING("dataset of BE SHORT with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME9, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ + nerrors += check_data_i(DATASETNAME9, fid); TESTING("dataset of LE INT with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME10, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_i(DATASETNAME10, fid); + TESTING("dataset of BE INT with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME11, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ + nerrors += check_data_i(DATASETNAME11, fid); TESTING("dataset of LE LONG LONG with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME12, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ - + nerrors += check_data_i(DATASETNAME12, fid); + TESTING("dataset of BE LONG LONG with scale-offset filter"); -#ifdef H5_HAVE_FILTER_SCALEOFFSET - nerrors += check_data(DATASETNAME13, file, FALSE); -#else /*H5_HAVE_FILTER_SCALEOFFSET*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SCALEOFFSET*/ + nerrors += check_data_i(DATASETNAME13, fid); TESTING("dataset of LE FLOAT with Fletcher32 filter"); -#ifdef H5_HAVE_FILTER_FLETCHER32 - nerrors += check_data(DATASETNAME14, file, TRUE); -#else /*H5_HAVE_FILTER_FLETCHER32*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_FLETCHER32*/ - + nerrors += check_data_f(DATASETNAME14, fid); + TESTING("dataset of BE FLOAT with Fletcher32 filter"); -#ifdef H5_HAVE_FILTER_FLETCHER32 - nerrors += check_data(DATASETNAME15, file, TRUE); -#else /*H5_HAVE_FILTER_FLETCHER32*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_FLETCHER32*/ - + nerrors += check_data_f(DATASETNAME15, fid); + TESTING("dataset of LE FLOAT with Deflate filter"); #ifdef H5_HAVE_FILTER_DEFLATE - nerrors += check_data(DATASETNAME16, file, TRUE); -#else /*H5_HAVE_FILTER_DEFLATE*/ + nerrors += check_data_f(DATASETNAME16, fid); +#else /*H5_HAVE_FILTER_DEFLATE*/ SKIPPED(); - puts(not_supported); + HDputs(not_supported); #endif /*H5_HAVE_FILTER_DEFLATE*/ TESTING("dataset of BE FLOAT with Deflate filter"); #ifdef H5_HAVE_FILTER_DEFLATE - nerrors += check_data(DATASETNAME17, file, TRUE); -#else /*H5_HAVE_FILTER_DEFLATE*/ + nerrors += check_data_f(DATASETNAME17, fid); +#else /*H5_HAVE_FILTER_DEFLATE*/ SKIPPED(); - puts(not_supported); + HDputs(not_supported); #endif /*H5_HAVE_FILTER_DEFLATE*/ TESTING("dataset of LE FLOAT with Szip filter"); #ifdef H5_HAVE_FILTER_SZIP - nerrors += check_data(DATASETNAME18, file, TRUE); -#else /*H5_HAVE_FILTER_SZIP*/ + nerrors += check_data_f(DATASETNAME18, fid); +#else /*H5_HAVE_FILTER_SZIP*/ SKIPPED(); - puts(not_supported); + HDputs(not_supported); #endif /*H5_HAVE_FILTER_SZIP*/ TESTING("dataset of BE FLOAT with Szip filter"); #ifdef H5_HAVE_FILTER_SZIP - nerrors += check_data(DATASETNAME19, file, TRUE); -#else /*H5_HAVE_FILTER_SZIP*/ + nerrors += check_data_f(DATASETNAME19, fid); +#else /*H5_HAVE_FILTER_SZIP*/ SKIPPED(); - puts(not_supported); + HDputs(not_supported); #endif /*H5_HAVE_FILTER_SZIP*/ TESTING("dataset of LE FLOAT with Shuffle filter"); -#ifdef H5_HAVE_FILTER_SHUFFLE - nerrors += check_data(DATASETNAME20, file, TRUE); -#else /*H5_HAVE_FILTER_SHUFFLE*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SHUFFLE*/ + nerrors += check_data_f(DATASETNAME20, fid); TESTING("dataset of BE FLOAT with Shuffle filter"); -#ifdef H5_HAVE_FILTER_SHUFFLE - nerrors += check_data(DATASETNAME21, file, TRUE); -#else /*H5_HAVE_FILTER_SHUFFLE*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_SHUFFLE*/ + nerrors += check_data_f(DATASETNAME21, fid); TESTING("dataset of LE FLOAT with Nbit filter"); -#ifdef H5_HAVE_FILTER_NBIT - nerrors += check_data(DATASETNAME22, file, TRUE); -#else /*H5_HAVE_FILTER_NBIT*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_NBIT*/ + nerrors += check_data_f(DATASETNAME22, fid); TESTING("dataset of BE FLOAT with Nbit filter"); -#ifdef H5_HAVE_FILTER_NBIT - nerrors += check_data(DATASETNAME23, file, TRUE); -#else /*H5_HAVE_FILTER_NBIT*/ - SKIPPED(); - puts(not_supported); -#endif /*H5_HAVE_FILTER_NBIT*/ + nerrors += check_data_f(DATASETNAME23, fid); - if(H5Fclose(file)) - TEST_ERROR - return 0; + if (H5Fclose(fid)) + FAIL_STACK_ERROR; + return nerrors; error: - H5E_BEGIN_TRY { - H5Fclose(file); - } H5E_END_TRY; + H5E_BEGIN_TRY + { + H5Fclose(fid); + } + H5E_END_TRY; return nerrors; -} +} /* end check_file() */ - /*------------------------------------------------------------------------- * Function: main * * Purpose: Tests reading files created on LE and BE systems. * - * Return: Success: exit(0) - * Failure: exit(1) + * Return: EXIT_SUCCESS/EXIT_FAILURE * * Programmer: Raymond Lu * Thursday, March 23, 2006 * *------------------------------------------------------------------------- */ -int main(void) +int +main(void) { - char filename[1024]; - unsigned nerrors = 0; + hbool_t driver_is_default_compatible; + char filename[1024]; + int nerrors = 0; h5_reset(); - puts("Testing reading data created on Linux"); - h5_fixname(FILENAME[1], H5P_DEFAULT, filename, sizeof filename); - nerrors += open_dataset(filename); + /* + * Skip tests for VFDs that aren't compatible with default VFD. + */ + if (h5_driver_is_default_vfd_compatible(H5P_DEFAULT, &driver_is_default_compatible) < 0) { + HDputs(" -- couldn't check if VFD is compatible with default VFD --"); + HDexit(EXIT_SUCCESS); + } + if (!driver_is_default_compatible) { + HDputs(" -- SKIPPED for incompatible VFD --"); + HDexit(EXIT_SUCCESS); + } + + HDputs("\n"); + HDputs("Testing reading data created on Linux"); + h5_fixname(FILENAME[1], H5P_DEFAULT, filename, sizeof(filename)); + nerrors += check_file(filename); - puts("Testing reading data created on Solaris"); - h5_fixname(FILENAME[2], H5P_DEFAULT, filename, sizeof filename); - nerrors += open_dataset(filename); + HDputs("\n"); + HDputs("Testing reading data created on Solaris"); + h5_fixname(FILENAME[2], H5P_DEFAULT, filename, sizeof(filename)); + nerrors += check_file(filename); if (nerrors) { - printf("***** %u FAILURE%s! *****\n", - nerrors, 1==nerrors?"":"S"); - HDexit(1); - } + HDprintf("***** %d FAILURE%s! *****\n", nerrors, 1 == nerrors ? "" : "S"); + return EXIT_FAILURE; + } /* end if */ - printf("All data type tests passed.\n"); - return 0; -} + HDprintf("All data type tests passed.\n"); + return EXIT_SUCCESS; +} /* end main() */ |