diff options
Diffstat (limited to 'test/mtime.c')
| -rw-r--r-- | test/mtime.c | 244 |
1 files changed, 128 insertions, 116 deletions
diff --git a/test/mtime.c b/test/mtime.c index 6e00fe0..8391def 100644 --- a/test/mtime.c +++ b/test/mtime.c @@ -1,51 +1,42 @@ /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Copyright by The HDF Group. * - * Copyright by the Board of Trustees of the University of Illinois. * * All rights reserved. * * * * This file is part of HDF5. The full HDF5 copyright notice, including * * terms governing use, modification, and redistribution, is contained in * - * the files COPYING and Copyright.html. COPYING can be found at the root * - * of the source code distribution tree; Copyright.html can be found at the * - * root level of an installed copy of the electronic HDF5 document set and * - * is linked from the top-level documents page. It can also be found at * - * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * - * access to either file, you may request a copy from help@hdfgroup.org. * + * the COPYING file, which can be found at the root of the source code * + * distribution tree, or in https://www.hdfgroup.org/licenses. * + * If you do not have access to either file, you may request a copy from * + * help@hdfgroup.org. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* - * Programmer: Robb Matzke <matzke@llnl.gov> + * Programmer: Robb Matzke * Thursday, July 30, 1998 * - * Purpose: Determines if the modification time message is working - * properly. Specifically, the code in H5O_mtime_decode() is - * very OS-dependent and this test tries to figure out if it's - * working properly. + * Purpose: Determines if the modification time message is working + * properly. Specifically, the code in H5O_mtime_decode() is + * very OS-dependent and this test tries to figure out if it's + * working properly. */ #include "h5test.h" #include "H5srcdir.h" -const char *FILENAME[] = { - "mtime", - NULL -}; +const char *FILENAME[] = {"mtime", NULL}; -#define TESTFILE1 "tmtimeo.h5" -#define MTIME1 1055531866 -#define TESTFILE2 "tmtimen.h5" -#define MTIME2 1041606478 +#define TESTFILE1 "tmtimeo.h5" +#define MTIME1 1055531866 +#define TESTFILE2 "tmtimen.h5" +#define MTIME2 1041606478 - /*------------------------------------------------------------------------- - * Function: main + * Function: main * - * Purpose: H5O_mtime_decode() test. + * Purpose: H5O_mtime_decode() test. * - * Return: Success: + * Return: EXIT_SUCCESS/EXIT_FAILURE * - * Failure: - * - * Programmer: Robb Matzke + * Programmer: Robb Matzke * Thursday, July 30, 1998 * * Modifications: @@ -60,30 +51,39 @@ const char *FILENAME[] = { int main(void) { - hid_t fapl, file, space, dset; - hsize_t size[1] = {2}; - time_t now; - struct tm *tm; - H5O_info_t oi1, oi2; - signed char buf1[32], buf2[32]; - char filename[1024]; + hid_t fapl, file, space, dset; + hsize_t size[1] = {2}; + time_t now; + struct tm *tm; + H5O_info2_t oi1, oi2; + signed char buf1[32], buf2[32]; + char filename[1024]; + int token_cmp; + hbool_t driver_is_default_compatible; h5_reset(); fapl = h5_fileaccess(); TESTING("modification time messages"); + if (h5_driver_is_default_vfd_compatible(fapl, &driver_is_default_compatible) < 0) + TEST_ERROR; + /* Create the file, create a dataset, then close the file */ h5_fixname(FILENAME[0], fapl, filename, sizeof filename); - if((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) + if ((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) + TEST_ERROR; + if ((space = H5Screate_simple(1, size, NULL)) < 0) TEST_ERROR; - if((space = H5Screate_simple(1, size, NULL)) < 0) TEST_ERROR; - if((dset = H5Dcreate2(file, "dset", H5T_NATIVE_SCHAR, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) + if ((dset = H5Dcreate2(file, "dset", H5T_NATIVE_SCHAR, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR; now = HDtime(NULL); - if(H5Dclose(dset) < 0) TEST_ERROR; - if(H5Sclose(space) < 0) TEST_ERROR; - if(H5Fclose(file) < 0) TEST_ERROR; + if (H5Dclose(dset) < 0) + TEST_ERROR; + if (H5Sclose(space) < 0) + TEST_ERROR; + if (H5Fclose(file) < 0) + TEST_ERROR; /* * Open the file and get the modification time. We'll test the @@ -91,109 +91,121 @@ main(void) * knowing its name. */ h5_fixname(FILENAME[0], fapl, filename, sizeof filename); - if((file = H5Fopen(filename, H5F_ACC_RDONLY, fapl)) < 0) TEST_ERROR; - if(H5Oget_info_by_name(file, "dset", &oi1, H5P_DEFAULT) < 0) TEST_ERROR; - if((dset = H5Dopen2(file, "dset", H5P_DEFAULT)) < 0) TEST_ERROR; - if(H5Oget_info(dset, &oi2) < 0) TEST_ERROR; - if(H5Dclose(dset) < 0) TEST_ERROR; - if(H5Fclose(file) < 0) TEST_ERROR; - - /* Compare addresses & times from the two ways of calling H5Oget_info() */ - if(oi1.addr != oi2.addr || oi1.ctime != oi2.ctime) { + if ((file = H5Fopen(filename, H5F_ACC_RDONLY, fapl)) < 0) + TEST_ERROR; + if (H5Oget_info_by_name3(file, "dset", &oi1, H5O_INFO_BASIC | H5O_INFO_TIME, H5P_DEFAULT) < 0) + TEST_ERROR; + if ((dset = H5Dopen2(file, "dset", H5P_DEFAULT)) < 0) + TEST_ERROR; + if (H5Oget_info3(dset, &oi2, H5O_INFO_BASIC | H5O_INFO_TIME) < 0) + TEST_ERROR; + if (H5Otoken_cmp(file, &oi1.token, &oi2.token, &token_cmp) < 0) + TEST_ERROR; + if (H5Dclose(dset) < 0) + TEST_ERROR; + if (H5Fclose(file) < 0) + TEST_ERROR; + + /* Compare object tokens & times from the two ways of calling H5Oget_info() */ + if (token_cmp || oi1.ctime != oi2.ctime) { H5_FAILED(); - puts(" Calling H5Oget_info() with the dataset ID returned"); - puts(" different values than calling it with a file and dataset"); - puts(" name."); + HDputs(" Calling H5Oget_info() with the dataset ID returned"); + HDputs(" different values than calling it with a file and dataset"); + HDputs(" name."); goto error; } /* Compare times -- they must be within 60 seconds of one another */ - if(0 == oi1.ctime) { + if (0 == oi1.ctime) { SKIPPED(); - puts(" The modification time could not be decoded on this OS."); - puts(" Modification times will be mantained in the file but"); - puts(" cannot be queried on this system. See H5O_mtime_decode()."); + HDputs(" The modification time could not be decoded on this OS."); + HDputs(" Modification times will be maintained in the file but"); + HDputs(" cannot be queried on this system. See H5O_mtime_decode()."); return 0; - } else if(HDfabs(HDdifftime(now, oi1.ctime)) > 60.0) { + } + else if (HDfabs(HDdifftime(now, oi1.ctime)) > 60.0) { H5_FAILED(); tm = HDlocaltime(&(oi1.ctime)); - HDstrftime((char*)buf1, sizeof buf1, "%Y-%m-%d %H:%M:%S", tm); + HDstrftime((char *)buf1, sizeof buf1, "%Y-%m-%d %H:%M:%S", tm); tm = HDlocaltime(&now); - HDstrftime((char*)buf2, sizeof buf2, "%Y-%m-%d %H:%M:%S", tm); - printf(" got: %s\n ans: %s\n", buf1, buf2); + HDstrftime((char *)buf2, sizeof buf2, "%Y-%m-%d %H:%M:%S", tm); + HDprintf(" got: %s\n ans: %s\n", buf1, buf2); goto error; } PASSED(); - - /* Check opening existing file with old-style modification time information - * and make certain that the time is correct - */ - TESTING("accessing old modification time messages"); - - { - const char *testfile = H5_get_srcdir_filename(TESTFILE1); /* Corrected test file name */ - - file = H5Fopen(testfile, H5F_ACC_RDONLY, H5P_DEFAULT); - if(file >= 0){ - if(H5Oget_info_by_name(file, "/Dataset1", &oi1, H5P_DEFAULT) < 0) - TEST_ERROR; - if(oi1.ctime != MTIME1) { + if (driver_is_default_compatible) { + /* Check opening existing file with old-style modification time information + * and make certain that the time is correct + */ + TESTING("accessing old modification time messages"); + + { + const char *testfile = H5_get_srcdir_filename(TESTFILE1); /* Corrected test file name */ + + file = H5Fopen(testfile, H5F_ACC_RDONLY, H5P_DEFAULT); + if (file >= 0) { + if (H5Oget_info_by_name3(file, "/Dataset1", &oi1, H5O_INFO_TIME, H5P_DEFAULT) < 0) + TEST_ERROR; + if (oi1.ctime != MTIME1) { + H5_FAILED(); + /* If this fails, examine H5Omtime.c. Modification time is very + * system dependent (e.g., on Windows DST must be hardcoded). */ + HDputs(" Old modification time incorrect"); + goto error; + } + if (H5Fclose(file) < 0) + TEST_ERROR; + } + else { H5_FAILED(); - /* If this fails, examine H5Omtime.c. Modification time is very - * system dependant (e.g., on Windows DST must be hardcoded). */ - puts(" Old modification time incorrect"); + HDprintf("***cannot open the pre-created old modification test file (%s)\n", testfile); goto error; - } - if(H5Fclose(file) < 0) TEST_ERROR; + } /* end else */ } - else { - H5_FAILED(); - printf("***cannot open the pre-created old modification test file (%s)\n", - testfile); - goto error; - } /* end else */ + PASSED(); } - PASSED(); - /* Check opening existing file with new-style modification time information - * and make certain that the time is correct - */ - TESTING("accessing new modification time messages"); - - { - const char *testfile = H5_get_srcdir_filename(TESTFILE2); /* Corrected test file name */ - - file = H5Fopen(testfile, H5F_ACC_RDONLY, H5P_DEFAULT); - if(file >= 0){ - if(H5Oget_info_by_name(file, "/Dataset1", &oi2, H5P_DEFAULT) < 0) - TEST_ERROR; - if(oi2.ctime != MTIME2) { - H5_FAILED(); - puts(" Modification time incorrect."); - goto error; + if (driver_is_default_compatible) { + /* Check opening existing file with new-style modification time information + * and make certain that the time is correct + */ + TESTING("accessing new modification time messages"); + + { + const char *testfile = H5_get_srcdir_filename(TESTFILE2); /* Corrected test file name */ + + file = H5Fopen(testfile, H5F_ACC_RDONLY, H5P_DEFAULT); + if (file >= 0) { + if (H5Oget_info_by_name3(file, "/Dataset1", &oi2, H5O_INFO_TIME, H5P_DEFAULT) < 0) + TEST_ERROR; + if (oi2.ctime != MTIME2) { + H5_FAILED(); + HDputs(" Modification time incorrect."); + goto error; + } + if (H5Fclose(file) < 0) + TEST_ERROR; } - if(H5Fclose(file) < 0) TEST_ERROR; + else { + H5_FAILED(); + HDprintf("***cannot open the pre-created old modification test file (%s)\n", testfile); + goto error; + } /* end else */ } - else { - H5_FAILED(); - printf("***cannot open the pre-created old modification test file (%s)\n", - testfile); - goto error; - } /* end else */ + PASSED(); } - PASSED(); /* Verify symbol table messages are cached */ - if(h5_verify_cached_stabs(FILENAME, fapl) < 0) TEST_ERROR + if (h5_verify_cached_stabs(FILENAME, fapl) < 0) + TEST_ERROR; /* All looks good */ - puts("All modification time tests passed."); + HDputs("All modification time tests passed."); h5_cleanup(FILENAME, fapl); - return 0; + return EXIT_SUCCESS; /* Something broke */ error: - return 1; -} - + return EXIT_FAILURE; +} /* end main() */ |
