diff options
Diffstat (limited to 'test/objcopy_ref.c')
| -rw-r--r-- | test/objcopy_ref.c | 1739 |
1 files changed, 1739 insertions, 0 deletions
diff --git a/test/objcopy_ref.c b/test/objcopy_ref.c new file mode 100644 index 0000000..721a7c6 --- /dev/null +++ b/test/objcopy_ref.c @@ -0,0 +1,1739 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the COPYING file, which can be found at the root of the source code * + * distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases. * + * If you do not have access to either file, you may request a copy from * + * help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* + * Programmer: Peter X. Cao + * May 01, 2005 + * + * Purpose: Test H5Ocopy() for references. + */ + +#include "testhdf5.h" + +#define H5F_FRIEND /*suppress error about including H5Fpkg */ +#define H5F_TESTING +#include "H5Fpkg.h" /* File access */ + +const char *FILENAME[] = { + "objcopy_ref_src", + "objcopy_ref_dst", + "objcopy_ref_ext", + "objcopy_ref_src2", + "verbound_ref_src", + "verbound_ref_dst", + NULL +}; + +/* Configuration, really a series of bit flags. Maximum value is all three + * bit flags enabled. + */ +#define CONFIG_SHARE_SRC 1 +#define CONFIG_SHARE_DST 2 +#define CONFIG_SRC_NEW_FORMAT 4 +#define CONFIG_DST_NEW_FORMAT 8 +#define CONFIG_DENSE 16 +#define MAX_CONFIGURATION 31 + +#define NAME_DATATYPE_SIMPLE "H5T_NATIVE_INT" +#define NAME_DATATYPE_SIMPLE2 "H5T_NATIVE_INT-2" +#define NAME_DATATYPE_VL "vlen of int" +#define NAME_DATATYPE_VL_VL "vlen of vlen of int" +#define NAME_DATASET_SIMPLE "dataset_simple" +#define NAME_DATASET_SIMPLE2 "dataset_simple_copy" +#define NAME_DATASET_SIMPLE3 "dataset_simple_another_copy" +#define NAME_DATASET_COMPOUND "dataset_compound" +#define NAME_DATASET_CHUNKED "dataset_chunked" +#define NAME_DATASET_CHUNKED_SINGLE "dataset_chunked_single" +#define NAME_DATASET_CHUNKED2 "dataset_chunked2" +#define NAME_DATASET_CHUNKED2_SINGLE "dataset_chunked2_single" +#define NAME_DATASET_CHUNKED3 "dataset_chunked3" +#define NAME_DATASET_CHUNKED3_SINGLE "dataset_chunked3_single" +#define NAME_DATASET_CHUNKED4 "dataset_chunked4" +#define NAME_DATASET_CHUNKED4_SINGLE "dataset_chunked4_single" +#define NAME_DATASET_COMPACT "dataset_compact" +#define NAME_DATASET_EXTERNAL "dataset_ext" +#define NAME_DATASET_NAMED_DTYPE "dataset_named_dtype" +#define NAME_DATASET_NAMED_DTYPE2 "dataset_named_dtype2" +#define NAME_DATASET_MULTI_OHDR "dataset_multi_ohdr" +#define NAME_DATASET_MULTI_OHDR2 "dataset_multi_ohdr2" +#define NAME_DATASET_VL "dataset_vl" +#define NAME_DATASET_VL2 "dataset_vl2" +#define NAME_DATASET_VL_VL "dataset_vl_vl" +#define NAME_DATASET_VL_VL2 "dataset_vl_vl2" +#define NAME_DATASET_CMPD_VL "dataset_cmpd_vl" +#define NAME_DATASET_SUB_SUB "/g0/g00/g000/dataset_simple" +#define NAME_GROUP_UNCOPIED "/uncopied" +#define NAME_GROUP_EMPTY "/empty" +#define NAME_GROUP_TOP "/g0" +#define NAME_GROUP_TOP2 "/g1" +#define NAME_GROUP_TOP3 "/g2" +#define NAME_GROUP_TOP4 "/g3" +#define NAME_GROUP_SUB "/g0/g00" +#define NAME_GROUP_SUB_2 "/g0/g01" +#define NAME_GROUP_SUB_SUB "/g0/g00/g000" +#define NAME_GROUP_SUB_SUB2 "g000" +#define NAME_GROUP_DATASET "/g0/dataset_simple" +#define NAME_GROUP_LINK "/g_links" +#define NAME_GROUP_LINK2 "/g_links2" +#define NAME_GROUP_LOOP "g_loop" +#define NAME_GROUP_LOOP2 "g_loop2" +#define NAME_GROUP_LOOP3 "g_loop3" +#define NAME_GROUP_REF "ref_grp" +#define NAME_LINK_DATASET "/g_links/dataset_simple" +#define NAME_LINK_HARD "/g_links/hard_link_to_dataset_simple" +#define NAME_LINK_SOFT "/g_links/soft_link_to_dataset_simple" +#define NAME_LINK_SOFT2 "/g_links2/soft_link_to_dataset_simple" +#define NAME_LINK_EXTERN "/g_links/external_link_to_dataset_simple" +#define NAME_LINK_EXTERN2 "/g_links2/external_link_to_dataset_simple" +#define NAME_LINK_SOFT_DANGLE "/g_links/soft_link_to_nowhere" +#define NAME_LINK_SOFT_DANGLE2 "/g_links2/soft_link_to_nowhere" +#define NAME_LINK_EXTERN_DANGLE "/g_links/external_link_to_nowhere" +#define NAME_LINK_EXTERN_DANGLE2 "/g_links2/external_link_to_nowhere" +#define NAME_OLD_FORMAT "/dset1" + +#define NAME_BUF_SIZE 1024 +#define ATTR_NAME_LEN 80 +#define DIM_SIZE_1 12 +#define DIM_SIZE_2 6 +#define MAX_DIM_SIZE_1 100 +#define MAX_DIM_SIZE_2 80 +#define CHUNK_SIZE_1 5 /* Not an even fraction of dimension sizes, so we test copying partial chunks */ +#define CHUNK_SIZE_2 5 +#define NUM_SUB_GROUPS 20 +#define NUM_WIDE_LOOP_GROUPS 10 +#define NUM_DATASETS 10 + +unsigned num_attributes_g; /* Number of attributes created */ + +/* Table containing object id and object name */ +/* (Used for detecting duplicate objects when comparing groups */ +static struct { + size_t nalloc; /* number of slots allocated */ + size_t nobjs; /* number of objects */ + haddr_t *obj; /* Addresses of objects seen */ +} idtab_g; + +/* Local function prototypes */ +static int +compare_data(hid_t parent1, hid_t parent2, hid_t pid, hid_t tid, size_t nelmts, + const void *buf1, const void *buf2, hid_t obj_owner); +static int +compare_datasets(hid_t did, hid_t did2, hid_t pid, const void *wbuf); +static int +compare_groups(hid_t gid, hid_t gid2, hid_t pid, int depth, unsigned copy_flags); + +/*------------------------------------------------------------------------- + * Function: addr_insert + * + * Purpose: Add an address to the table. + * + * Return: void + * + * Programmer: Quincey Koziol + * Saturday, November 5, 2005 + * + *------------------------------------------------------------------------- + */ +static void +addr_insert(H5O_info_t *oi) +{ + size_t n; + + /* Don't add it if the link count is 1 because such an object can only + * be encountered once. */ + if(oi->rc < 2) + return; + + /* Extend the table */ + if(idtab_g.nobjs >= idtab_g.nalloc) { + idtab_g.nalloc = MAX(256, 2*idtab_g.nalloc); + idtab_g.obj = (haddr_t *)HDrealloc(idtab_g.obj, idtab_g.nalloc * sizeof(idtab_g.obj[0])); + } /* end if */ + + /* Insert the entry */ + n = idtab_g.nobjs++; + idtab_g.obj[n] = oi->addr; +} /* end addr_insert() */ + + +/*------------------------------------------------------------------------- + * Function: addr_lookup + * + * Purpose: Check if address has already been encountered + * + * Return: Success: TRUE/FALSE + * + * Failure: (can't fail) + * + * Programmer: Quincey Koziol + * Saturday, November 5, 2005 + * + *------------------------------------------------------------------------- + */ +static H5_ATTR_PURE hbool_t +addr_lookup(H5O_info_t *oi) +{ + size_t n; + + if(oi->rc < 2) return FALSE; /*only one link possible*/ + + for(n = 0; n < idtab_g.nobjs; n++) + if(H5F_addr_eq(idtab_g.obj[n], oi->addr)) + return TRUE; + + return FALSE; +} /* end addr_lookup() */ + + +/*------------------------------------------------------------------------- + * Function: addr_reset + * + * Purpose: Reset the address tracking data structures + * + * Return: void + * + * Programmer: Quincey Koziol + * Saturday, November 5, 2005 + * + *------------------------------------------------------------------------- + */ +static void +addr_reset(void) +{ + if(idtab_g.obj) + HDfree(idtab_g.obj); + idtab_g.obj = NULL; + idtab_g.nalloc = idtab_g.nobjs = 0; +} /* end addr_reset() */ + + +/*------------------------------------------------------------------------- + * Function: attach_ref_attr + * + * Purpose: Create an attribute with object references + * + * Return: Non-negative on success/Negative on failure + * + *------------------------------------------------------------------------- + */ +static herr_t +attach_ref_attr(hid_t file_id, hid_t loc_id) +{ + char dsetname1[] = "dataset1_pointed_by_ref_attr"; + char dsetname2[] = "dataset2_pointed_by_ref_attr"; + hid_t did1 = (-1), did2 = (-1), aid = (-1), sid = (-1), sid_ref = (-1); + hsize_t dims[2] = {2,9}; + hsize_t dims_ref[1] = {2}; + H5R_ref_t ref[2]; + int data1[2][9] = {{1,1,1,1,1,1,1,1,1},{1,1,1,1,1,1,1,1,18}}; + int data2[2][9] = {{2,2,2,2,2,2,2,2,2},{2,2,2,2,2,2,2,2,18}}; + + /* creates two simple datasets */ + if((sid = H5Screate_simple(2, dims, NULL)) < 0) TEST_ERROR + if((sid_ref = H5Screate_simple(1, dims_ref, NULL)) < 0) TEST_ERROR + if((did1 = H5Dcreate2(file_id, dsetname1, H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(did1, H5T_NATIVE_INT, H5S_ALL , H5S_ALL, H5P_DEFAULT,data1) < 0) TEST_ERROR + if((did2 = H5Dcreate2(file_id, dsetname2, H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(did2, H5T_NATIVE_INT, H5S_ALL , H5S_ALL, H5P_DEFAULT,data2) < 0) TEST_ERROR + + /* create an attribute with two object references */ + if(H5Rcreate_object(file_id, dsetname1, &ref[0]) < 0) TEST_ERROR + if(H5Rcreate_object(file_id, dsetname2, &ref[1]) < 0) TEST_ERROR + if((aid = H5Acreate2(loc_id, "obj_ref_attr", H5T_STD_REF, sid_ref, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Awrite(aid, H5T_STD_REF, ref) < 0) TEST_ERROR + + if(H5Sclose(sid) < 0) TEST_ERROR + if(H5Sclose(sid_ref) < 0) TEST_ERROR + if(H5Dclose(did1) < 0) TEST_ERROR + if(H5Dclose(did2) < 0) TEST_ERROR + if(H5Aclose(aid) < 0) TEST_ERROR + if(H5Rdestroy(&ref[0]) < 0) TEST_ERROR + if(H5Rdestroy(&ref[1]) < 0) TEST_ERROR + + return 0; + +error: + H5E_BEGIN_TRY { + H5Sclose(sid); + H5Sclose(sid_ref); + H5Dclose(did1); + H5Dclose(did2); + H5Aclose(aid); + H5Rdestroy(&ref[0]); + H5Rdestroy(&ref[1]); + } H5E_END_TRY; + + return(-1); +} + +/*------------------------------------------------------------------------- + * Function: attach_reg_ref_attr + * + * Purpose: Create an attribute with object references + * + * Return: Non-negative on success/Negative on failure + * + * Programmer: Peter Cao + * Monday, March 5, 2006 + * + *------------------------------------------------------------------------- + */ +static herr_t +attach_reg_ref_attr(hid_t file_id, hid_t loc_id) +{ + const char dsetnamev[] = "dataset_pointed_by_reg_ref_attr"; + hid_t aid = (-1); + hid_t space_id = (-1); /* dataspace identifiers */ + hid_t spacer_id = (-1); /* dataspace identifiers */ + hid_t dsetv_id = (-1); /*dataset identifiers*/ + hsize_t dims[2] = {2,9}; + hsize_t dimsr[1] = {2}; + int rank = 2; + int rankr =1; + H5R_ref_t ref[2]; + int data[2][9] = {{1,1,2,3,3,4,5,5,999},{1,2,2,3,4,4,5,6,999}}; + hsize_t start[2] = {0, 3}; + hsize_t count[2] = {2, 3}; + hsize_t coord[3][2] = {{0, 0}, {1, 6}, {0, 8}}; + size_t num_points = 3; + + /* create a 2D dataset */ + if((space_id = H5Screate_simple(rank, dims, NULL)) < 0) TEST_ERROR + if((spacer_id = H5Screate_simple(rankr, dimsr, NULL)) < 0) TEST_ERROR + if((dsetv_id = H5Dcreate2(file_id, dsetnamev, H5T_NATIVE_INT, space_id, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(dsetv_id, H5T_NATIVE_INT, H5S_ALL , H5S_ALL, H5P_DEFAULT,data) < 0) TEST_ERROR + + /* create reg_ref of block selection */ + if(H5Sselect_hyperslab(space_id,H5S_SELECT_SET,start,NULL,count,NULL) < 0) TEST_ERROR + if(H5Rcreate_region(file_id, dsetnamev, space_id, &ref[0]) < 0) TEST_ERROR + + /* create reg_ref of point selection */ + if(H5Sselect_none(space_id) < 0) TEST_ERROR + if(H5Sselect_elements(space_id, H5S_SELECT_SET, num_points, (const hsize_t *)coord) < 0) TEST_ERROR + if(H5Rcreate_region(file_id, dsetnamev, space_id, &ref[1]) < 0) TEST_ERROR + + /* create reg_ref attribute */ + if((aid = H5Acreate2(loc_id, "reg_ref_attr", H5T_STD_REF, spacer_id, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Awrite(aid, H5T_STD_REF, ref) < 0) TEST_ERROR + + /* attach the reg_ref attribute to the dataset itself */ + if(H5Aclose(aid) < 0) TEST_ERROR + if((aid = H5Acreate2(dsetv_id, "reg_ref_attr", H5T_STD_REF, spacer_id, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Awrite(aid, H5T_STD_REF, ref) < 0) TEST_ERROR + + if(H5Sclose(spacer_id) < 0) TEST_ERROR + if(H5Sclose(space_id) < 0) TEST_ERROR + if(H5Dclose(dsetv_id) < 0) TEST_ERROR + if(H5Aclose(aid) < 0) TEST_ERROR + if(H5Rdestroy(&ref[0]) < 0) TEST_ERROR + if(H5Rdestroy(&ref[1]) < 0) TEST_ERROR + + + return 0; + +error: + H5E_BEGIN_TRY { + H5Sclose(spacer_id); + H5Sclose(space_id); + H5Dclose(dsetv_id); + H5Aclose(aid); + H5Rdestroy(&ref[0]); + H5Rdestroy(&ref[1]); + } H5E_END_TRY; + + return(-1); +} + + +/*------------------------------------------------------------------------- + * Function: create_reg_ref_dataset + * + * Purpose: Create a dataset with region references + * + * Return: Non-negative on success/Negative on failure + * + * Programmer: Peter Cao + * Friday, August 4, 2006 + * + *------------------------------------------------------------------------- + */ +static herr_t +create_reg_ref_dataset(hid_t file_id, hid_t loc_id) +{ + const char dsetnamev[] = "dataset_pointed_by_ref_dset"; + const char dsetnamer[] = "dataset_with_reg_ref"; + const char dsetnamer1[] = "compact_dataset_with_reg_ref"; + const char dsetnamer2[] = "compressed_dataset_with_reg_ref"; + hid_t space_id = (-1); /* dataspace identifiers */ + hid_t spacer_id = (-1); + hid_t dsetv_id = (-1); /*dataset identifiers*/ + hid_t dsetr_id = (-1); + hsize_t dims[2] = {2,9}; + hsize_t dimsr[1] = {2}; + int rank = 2; + int rankr =1; + hsize_t chunk_size=1; + H5R_ref_t ref[2]; + int data[2][9] = {{1,1,2,3,3,4,5,5,6},{1,2,2,3,4,4,5,6,6}}; + hsize_t start[2]; + hsize_t count[2]; + hsize_t coord[3][2] = {{0, 0}, {1, 6}, {0, 8}}; + size_t num_points = 3; + hid_t pid = (-1); + + if((space_id = H5Screate_simple(rank, dims, NULL)) < 0) TEST_ERROR + if((spacer_id = H5Screate_simple(rankr, dimsr, NULL)) < 0) TEST_ERROR + if((dsetv_id = H5Dcreate2(file_id, dsetnamev, H5T_NATIVE_INT, space_id, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(dsetv_id, H5T_NATIVE_INT, H5S_ALL , H5S_ALL, H5P_DEFAULT,data) < 0) TEST_ERROR + if((dsetr_id = H5Dcreate2(loc_id, dsetnamer, H5T_STD_REF, spacer_id, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + start[0] = 0; + start[1] = 3; + count[0] = 2; + count[1] = 3; + if(H5Sselect_hyperslab(space_id,H5S_SELECT_SET,start,NULL,count,NULL) < 0) TEST_ERROR + if(H5Rcreate_region(file_id, dsetnamev, space_id, &ref[0]) < 0) TEST_ERROR + if(H5Sselect_none(space_id) < 0) TEST_ERROR + if(H5Sselect_elements(space_id, H5S_SELECT_SET, num_points, (const hsize_t *)coord) < 0) TEST_ERROR + if(H5Rcreate_region(file_id, dsetnamev, space_id, &ref[1]) < 0) TEST_ERROR + if(H5Dwrite(dsetr_id, H5T_STD_REF, H5S_ALL, H5S_ALL, H5P_DEFAULT,ref) < 0) TEST_ERROR + if(H5Dclose(dsetr_id) < 0) TEST_ERROR + + /* create and set compact plist */ + if((pid = H5Pcreate(H5P_DATASET_CREATE)) < 0) TEST_ERROR + if(H5Pset_layout(pid, H5D_COMPACT) < 0) TEST_ERROR + + if((dsetr_id = H5Dcreate2(loc_id, dsetnamer1, H5T_STD_REF, spacer_id, H5P_DEFAULT, pid, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Pclose(pid) < 0) TEST_ERROR + if(H5Dwrite(dsetr_id, H5T_STD_REF, H5S_ALL, H5S_ALL, H5P_DEFAULT, ref) < 0) TEST_ERROR + if(H5Dclose(dsetr_id) < 0) TEST_ERROR + + /* create and set comp & chunk plist */ + if((pid = H5Pcreate(H5P_DATASET_CREATE)) < 0) TEST_ERROR + if(H5Pset_chunk(pid, 1, &chunk_size) < 0) TEST_ERROR + if(H5Pset_deflate(pid, 9) < 0) TEST_ERROR + + if((dsetr_id = H5Dcreate2(loc_id, dsetnamer2, H5T_STD_REF, spacer_id, H5P_DEFAULT, pid, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Pclose(pid) < 0) TEST_ERROR + if(H5Dwrite(dsetr_id, H5T_STD_REF, H5S_ALL, H5S_ALL, H5P_DEFAULT,ref) < 0) TEST_ERROR + if(H5Dclose(dsetr_id) < 0) TEST_ERROR + + if(H5Sclose(space_id) < 0) TEST_ERROR + if(H5Sclose(spacer_id) < 0) TEST_ERROR + if(H5Dclose(dsetv_id) < 0) TEST_ERROR + if(H5Rdestroy(&ref[0]) < 0) TEST_ERROR + if(H5Rdestroy(&ref[1]) < 0) TEST_ERROR + + return 0; + + +error: + H5E_BEGIN_TRY { + H5Sclose(space_id); + H5Sclose(spacer_id); + H5Dclose(dsetr_id); + H5Dclose(dsetv_id); + H5Pclose(pid); + H5Rdestroy(&ref[0]); + H5Rdestroy(&ref[1]); + } H5E_END_TRY; + + return(-1); +} + +/*------------------------------------------------------------------------- + * Function: test_copy_attach_attributes + * + * Purpose: Attach NUM_ATTRIBUTES attributes to the object to be copied + * + * Return: Non-negative on success/Negative on failure + * + * Programmer: Peter Cao + * Friday, September 30, 2005 + * + *------------------------------------------------------------------------- + */ +static int +test_copy_attach_attributes(hid_t loc_id, hid_t type_id) +{ + hid_t aid = -1, sid = -1; + char attr_name[ATTR_NAME_LEN]; + int attr_data[2]; + hsize_t dim1 = 2; + hid_t acpl = -1; + unsigned u; + int ret_value = -1; + + if((sid = H5Screate_simple(1, &dim1, NULL)) < 0 ) + goto done; + + /* Create attribute creation plist */ + if((acpl = H5Pcreate(H5P_ATTRIBUTE_CREATE)) < 0) + goto done; + + for(u = 0; u < num_attributes_g; u++) { + HDsprintf(attr_name, "%u attr", u); + + /* Set attribute data */ + attr_data[0] = (int)(100 * u); + attr_data[1] = (int)(200 * u); + + /* Set attribute character set (alternate) */ + if(u % 2) { + if(H5Pset_char_encoding(acpl, H5T_CSET_ASCII) < 0) + goto done; + } /* end if */ + else + if(H5Pset_char_encoding(acpl, H5T_CSET_UTF8) < 0) + goto done; + + if((aid = H5Acreate2(loc_id, attr_name, type_id, sid, acpl, H5P_DEFAULT)) < 0) + goto done; + + if(H5Awrite(aid, H5T_NATIVE_INT, attr_data) < 0) + goto done; + + if(aid > 0) + H5Aclose(aid); + + aid = -1; + } + + ret_value = 0; + +done: + if(sid > 0) + H5Sclose(sid); + if(aid > 0) + H5Aclose(aid); + if(acpl > 0) + H5Pclose(acpl); + + return ret_value; +} + +/*------------------------------------------------------------------------- + * Function: compare_attribute + * + * Purpose: Compare two attributes to check that they are equal + * + * Return: TRUE if attributes are equal/FALSE if they are different + * + * Programmer: Peter Cao + * Saturday, December 17, 2005 + * + *------------------------------------------------------------------------- + */ +static int +compare_attribute(hid_t aid, hid_t aid2, hid_t pid, const void *wbuf, hid_t obj_owner) +{ + hid_t sid = -1, sid2 = -1; /* Dataspace IDs */ + hid_t tid = -1, tid2 = -1; /* Datatype IDs */ + size_t elmt_size; /* Size of datatype */ + htri_t is_committed; /* If the datatype is committed */ + htri_t is_committed2; /* If the datatype is committed */ + H5A_info_t ainfo; /* Attribute info */ + H5A_info_t ainfo2; /* Attribute info */ + hssize_t nelmts; /* # of elements in dataspace */ + void *rbuf = NULL; /* Buffer for reading raw data */ + void *rbuf2 = NULL; /* Buffer for reading raw data */ + + /* Check the character sets are equal */ + if(H5Aget_info(aid, &ainfo) < 0) TEST_ERROR + if(H5Aget_info(aid2, &ainfo2) < 0) TEST_ERROR + if(ainfo.cset != ainfo2.cset) TEST_ERROR + + /* Check the creation orders are equal (if appropriate) */ + if(ainfo.corder_valid != ainfo2.corder_valid) TEST_ERROR + if(ainfo.corder_valid) + if(ainfo.corder != ainfo2.corder) TEST_ERROR + + /* Check the datatypes are equal */ + + /* Open the datatype for the source attribute */ + if((tid = H5Aget_type(aid)) < 0) TEST_ERROR + + /* Open the datatype for the destination attribute */ + if((tid2 = H5Aget_type(aid2)) < 0) TEST_ERROR + + /* Check that both datatypes are committed/not committed */ + if((is_committed = H5Tcommitted(tid)) < 0) TEST_ERROR + if((is_committed2 = H5Tcommitted(tid2)) < 0) TEST_ERROR + if(is_committed != is_committed2) TEST_ERROR + + /* Compare the datatypes */ + if(H5Tequal(tid, tid2) != TRUE) TEST_ERROR + + /* Determine the size of datatype (for later) */ + if((elmt_size = H5Tget_size(tid)) == 0) TEST_ERROR + + /* Check the dataspaces are equal */ + + /* Open the dataspace for the source attribute */ + if((sid = H5Aget_space(aid)) < 0) TEST_ERROR + + /* Open the dataspace for the destination attribute */ + if((sid2 = H5Aget_space(aid2)) < 0) TEST_ERROR + + /* Compare the dataspaces */ + if(H5Sextent_equal(sid, sid2) != TRUE) TEST_ERROR + + /* Determine the number of elements in dataspace (for later) */ + if((nelmts = H5Sget_simple_extent_npoints(sid2)) < 0) TEST_ERROR + + /* Check the raw data is equal */ + + /* Allocate & initialize space for the raw data buffers */ + if((rbuf = HDcalloc( elmt_size, (size_t)nelmts)) == NULL) TEST_ERROR + if((rbuf2 = HDcalloc( elmt_size, (size_t)nelmts)) == NULL) TEST_ERROR + + /* Read data from the source attribute */ + if(H5Aread(aid, tid, rbuf) < 0) TEST_ERROR + + /* Read data from the destination attribute */ + if(H5Aread(aid2, tid2, rbuf2) < 0) TEST_ERROR + + /* Check raw data read in against data written out */ + if(wbuf) { + if(!compare_data(aid, (hid_t)0, pid, tid, (size_t)nelmts, wbuf, rbuf, obj_owner)) TEST_ERROR + if(!compare_data(aid2, (hid_t)0, pid, tid2, (size_t)nelmts, wbuf, rbuf2, obj_owner)) TEST_ERROR + } /* end if */ + /* Don't have written data, just compare data between the two attributes */ + else + if(!compare_data(aid, aid2, pid, tid, (size_t)nelmts, rbuf, rbuf2, obj_owner)) TEST_ERROR + + /* Reclaim vlen data, if necessary */ + if(H5Tdetect_class(tid, H5T_VLEN) == TRUE || H5Tdetect_class(tid, H5T_REFERENCE) == TRUE) + if(H5Treclaim(tid, sid, H5P_DEFAULT, rbuf) < 0) TEST_ERROR + if(H5Tdetect_class(tid2, H5T_VLEN) == TRUE || H5Tdetect_class(tid2, H5T_REFERENCE) == TRUE) + if(H5Treclaim(tid2, sid2, H5P_DEFAULT, rbuf2) < 0) TEST_ERROR + + /* Release raw data buffers */ + HDfree(rbuf); + rbuf = NULL; + HDfree(rbuf2); + rbuf2 = NULL; + + /* close the source dataspace */ + if(H5Sclose(sid) < 0) TEST_ERROR + + /* close the destination dataspace */ + if(H5Sclose(sid2) < 0) TEST_ERROR + + /* close the source datatype */ + if(H5Tclose(tid) < 0) TEST_ERROR + + /* close the destination datatype */ + if(H5Tclose(tid2) < 0) TEST_ERROR + + return TRUE; + +error: + if(rbuf) + HDfree(rbuf); + if(rbuf2) + HDfree(rbuf2); + H5E_BEGIN_TRY { + H5Sclose(sid2); + H5Sclose(sid); + H5Tclose(tid2); + H5Tclose(tid); + } H5E_END_TRY; + return FALSE; +} /* end compare_attribute() */ + + +/*------------------------------------------------------------------------- + * Function: compare_std_attributes + * + * Purpose: Compare "standard" attributes on two objects to check that they are equal + * + * Return: TRUE if objects have same attributes/FALSE if they are different + * + * Programmer: Quincey Koziol + * Monday, October 31, 2005 + * + * Note: This isn't very general, the attributes are assumed to be + * those written in test_copy_attach_attributes(). + * + *------------------------------------------------------------------------- + */ +static int +compare_std_attributes(hid_t oid, hid_t oid2, hid_t pid) +{ + hid_t aid = -1, aid2 = -1; /* Attribute IDs */ + H5O_info_t oinfo1, oinfo2; /* Object info */ + unsigned cpy_flags; /* Object copy flags */ + + /* Retrieve the object copy flags from the property list, if it's non-DEFAULT */ + if(pid != H5P_DEFAULT) { + if(H5Pget_copy_object(pid, &cpy_flags) < 0) TEST_ERROR + } /* end if */ + else + cpy_flags = 0; + + /* Check the number of attributes on source dataset */ + if(H5Oget_info2(oid, &oinfo1, H5O_INFO_NUM_ATTRS) < 0) TEST_ERROR + + /* Check the number of attributes on destination dataset */ + if(H5Oget_info2(oid2, &oinfo2, H5O_INFO_NUM_ATTRS) < 0) TEST_ERROR + + if(cpy_flags & H5O_COPY_WITHOUT_ATTR_FLAG) { + /* Check that the destination has no attributes */ + if(oinfo2.num_attrs != 0) TEST_ERROR + } /* end if */ + else { + char attr_name[ATTR_NAME_LEN]; /* Attribute name */ + unsigned i; /* Local index variable */ + + /* Compare the number of attributes */ + if(oinfo1.num_attrs != oinfo2.num_attrs) TEST_ERROR + + /* Check the attributes are equal */ + for(i = 0; i < (unsigned)oinfo1.num_attrs; i++) { + if((aid = H5Aopen_by_idx(oid, ".", H5_INDEX_CRT_ORDER, H5_ITER_INC, (hsize_t)i, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Aget_name(aid, (size_t)ATTR_NAME_LEN, attr_name) < 0) TEST_ERROR + + if((aid2 = H5Aopen(oid2, attr_name, H5P_DEFAULT)) < 0) TEST_ERROR + + /* Check the attributes are equal */ + if(!compare_attribute(aid, aid2, pid, NULL, oid)) TEST_ERROR + + /* Close the attributes */ + if(H5Aclose(aid) < 0) TEST_ERROR + if(H5Aclose(aid2) < 0) TEST_ERROR + } /* end for */ + } /* end if */ + + /* Objects should be the same. :-) */ + return TRUE; + +error: + H5E_BEGIN_TRY { + H5Aclose(aid2); + H5Aclose(aid); + } H5E_END_TRY; + return FALSE; +} /* end compare_std_attributes() */ + + +/*------------------------------------------------------------------------- + * Function: compare_data + * + * Purpose: Compare two buffers of data to check that they are equal + * + * Return: TRUE if buffer are equal/FALSE if they are different + * + * Programmer: Quincey Koziol + * Monday, November 21, 2005 + * + *------------------------------------------------------------------------- + */ +static int +compare_data(hid_t parent1, hid_t parent2, hid_t pid, hid_t tid, size_t nelmts, + const void *buf1, const void *buf2, hid_t obj_owner) +{ + size_t elmt_size; /* Size of an element */ + + /* Check size of each element */ + if((elmt_size = H5Tget_size(tid)) == 0) TEST_ERROR + + /* If the type is a compound containing a vlen, loop over all elements for + * each compound member. Compounds containing reference are not supported + * yet. */ + if((H5Tget_class(tid) == H5T_COMPOUND) + && (H5Tdetect_class(tid, H5T_VLEN) == TRUE)) { + hid_t memb_id; /* Member id */ + const uint8_t *memb1; /* Pointer to current member */ + const uint8_t *memb2; /* Pointer to current member */ + int nmembs; /* Number of members */ + size_t memb_off; /* Member offset */ + size_t memb_size; /* Member size */ + unsigned memb_idx; /* Member index */ + size_t elmt; /* Current element */ + + /* Get number of members in compound */ + if((nmembs = H5Tget_nmembers(tid)) < 0) TEST_ERROR + + /* Loop over members */ + for(memb_idx=0; memb_idx<(unsigned)nmembs; memb_idx++) { + /* Get member offset. Note that we cannot check for an error here. + */ + memb_off = H5Tget_member_offset(tid, memb_idx); + + /* Get member id */ + if((memb_id = H5Tget_member_type(tid, memb_idx)) < 0) TEST_ERROR + + /* Get member size */ + if((memb_size = H5Tget_size(memb_id)) == 0) TEST_ERROR + + /* Set up pointers to member in the first element */ + memb1 = (const uint8_t *)buf1 + memb_off; + memb2 = (const uint8_t *)buf2 + memb_off; + + /* Check if this member contains (or is) a vlen */ + if(H5Tget_class(memb_id) == H5T_VLEN) { + hid_t base_id; /* vlen base type id */ + + /* Get base type of vlen datatype */ + if((base_id = H5Tget_super(memb_id)) < 0) TEST_ERROR + + /* Iterate over all elements, recursively calling this function + * for each */ + for(elmt=0; elmt<nelmts; elmt++) { + /* Check vlen lengths */ + if(((const hvl_t *)((const void *)memb1))->len + != ((const hvl_t *)((const void *)memb2))->len) + TEST_ERROR + + /* Check vlen data */ + if(!compare_data(parent1, parent2, pid, base_id, + ((const hvl_t *)((const void *)memb1))->len, + ((const hvl_t *)((const void *)memb1))->p, + ((const hvl_t *)((const void *)memb2))->p, obj_owner)) + TEST_ERROR + + /* Update member pointers */ + memb1 += elmt_size; + memb2 += elmt_size; + } /* end for */ + } else { + /* vlens cannot currently be nested below the top layer of a + * compound */ + HDassert(H5Tdetect_class(memb_id, H5T_VLEN) == FALSE); + + /* Iterate over all elements, calling memcmp() for each */ + for(elmt=0; elmt<nelmts; elmt++) { + if(HDmemcmp(memb1, memb2, memb_size)) + TEST_ERROR + + /* Update member pointers */ + memb1 += elmt_size; + memb2 += elmt_size; + } /* end for */ + } /* end else */ + } /* end for */ + } else if(H5Tdetect_class(tid, H5T_VLEN) == TRUE) { + const hvl_t *vl_buf1, *vl_buf2; /* Aliases for buffers to compare */ + hid_t base_tid; /* Base type of vlen datatype */ + size_t u; /* Local index variable */ + + /* Check for "simple" vlen datatype */ + if(H5Tget_class(tid) != H5T_VLEN) TEST_ERROR + + /* Get base type of vlen datatype */ + if((base_tid = H5Tget_super(tid)) < 0) TEST_ERROR + + /* Loop over elements in buffers */ + vl_buf1 = (const hvl_t *)buf1; + vl_buf2 = (const hvl_t *)buf2; + for(u = 0; u < nelmts; u++, vl_buf1++, vl_buf2++) { + /* Check vlen lengths */ + if(vl_buf1->len != vl_buf2->len) TEST_ERROR + + /* Check vlen data */ + if(!compare_data(parent1, parent2, pid, base_tid, vl_buf1->len, vl_buf1->p, vl_buf2->p, obj_owner)) TEST_ERROR + } /* end for */ + + if(H5Tclose(base_tid) < 0) TEST_ERROR + } /* end if */ + else if(H5Tdetect_class(tid, H5T_REFERENCE) == TRUE) { + size_t u; /* Local index variable */ + + /* Check for "simple" reference datatype */ + if(H5Tget_class(tid) != H5T_REFERENCE) TEST_ERROR + + /* Check for object or region reference */ + if(H5Tequal(tid, H5T_STD_REF) > 0) { + const H5R_ref_t *ref_buf1, *ref_buf2; /* Aliases for buffers to compare */ + + /* Loop over elements in buffers */ + ref_buf1 = (const H5R_ref_t *)buf1; + ref_buf2 = (const H5R_ref_t *)buf2; + for(u = 0; u < nelmts; u++, ref_buf1++, ref_buf2++) { + hid_t obj1_id, obj2_id; /* IDs for objects referenced */ + H5O_type_t obj1_type, obj2_type; /* Types of objects referenced */ + + /* Check for types of objects handled */ + if(H5Rget_obj_type3(ref_buf1, H5P_DEFAULT, &obj1_type) < 0) TEST_ERROR + if(H5Rget_obj_type3(ref_buf2, H5P_DEFAULT, &obj2_type) < 0) TEST_ERROR + if(obj1_type != obj2_type) TEST_ERROR + + /* Open referenced objects */ + if((obj1_id = H5Ropen_object(ref_buf1, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if((obj2_id = H5Ropen_object(ref_buf2, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + /* break the infinite loop when the ref_object points to itself */ + if(obj_owner > 0) { + H5O_info_t oinfo1, oinfo2; + + if(H5Oget_info2(obj_owner, &oinfo1, H5O_INFO_BASIC) < 0) TEST_ERROR + if(H5Oget_info2(obj1_id, &oinfo2, H5O_INFO_BASIC) < 0) TEST_ERROR + if(H5F_addr_eq(oinfo1.addr, oinfo2.addr)) { + if(H5Oclose(obj1_id) < 0) TEST_ERROR + if(H5Oclose(obj2_id) < 0) TEST_ERROR + return TRUE; + } + } + + /* Check for types of objects handled */ + switch(obj1_type) { + case H5O_TYPE_DATASET: + if(compare_datasets(obj1_id, obj2_id, pid, NULL) != TRUE) TEST_ERROR + break; + + case H5O_TYPE_GROUP: + if(compare_groups(obj1_id, obj2_id, pid, -1, 0) != TRUE) TEST_ERROR + break; + + case H5O_TYPE_NAMED_DATATYPE: + if(H5Tequal(obj1_id, obj2_id) != TRUE) TEST_ERROR + break; + + case H5O_TYPE_MAP: + /* Maps not supported in native VOL connector */ + + case H5O_TYPE_UNKNOWN: + case H5O_TYPE_NTYPES: + default: + TEST_ERROR + } /* end switch */ + + /* Close objects */ + if(H5Oclose(obj1_id) < 0) TEST_ERROR + if(H5Oclose(obj2_id) < 0) TEST_ERROR + + if(H5Rget_type(ref_buf1) == H5R_DATASET_REGION2) { + hid_t obj1_sid, obj2_sid; /* Dataspace IDs for objects referenced */ + + /* Get regions for referenced datasets */ + if((obj1_sid = H5Ropen_region(ref_buf1, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if((obj2_sid = H5Ropen_region(ref_buf2, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + /* Check if dataspaces are the same shape */ + if(H5Sselect_shape_same(obj1_sid, obj2_sid) < 0) TEST_ERROR + + /* Close dataspaces */ + if(H5Sclose(obj1_sid) < 0) TEST_ERROR + if(H5Sclose(obj2_sid) < 0) TEST_ERROR + } /* end if */ + } /* end for */ + } /* end if */ + else + TEST_ERROR + } /* end else */ + else + if(HDmemcmp(buf1, buf2, (elmt_size * nelmts))) TEST_ERROR + + /* Data should be the same. :-) */ + return TRUE; + +error: + return FALSE; +} /* end compare_data() */ + + +/*------------------------------------------------------------------------- + * Function: compare_datasets + * + * Purpose: Compare two datasets to check that they are equal + * + * Return: TRUE if datasets are equal/FALSE if they are different + * + * Programmer: Quincey Koziol + * Tuesday, October 25, 2005 + * + *------------------------------------------------------------------------- + */ +static int +compare_datasets(hid_t did, hid_t did2, hid_t pid, const void *wbuf) +{ + hid_t sid = -1, sid2 = -1; /* Dataspace IDs */ + hid_t tid = -1, tid2 = -1; /* Datatype IDs */ + hid_t dcpl = -1, dcpl2 = -1; /* Dataset creation property list IDs */ + size_t elmt_size; /* Size of datatype */ + htri_t is_committed; /* If the datatype is committed */ + htri_t is_committed2; /* If the datatype is committed */ + int nfilters; /* Number of filters applied to dataset */ + hssize_t nelmts; /* # of elements in dataspace */ + void *rbuf = NULL; /* Buffer for reading raw data */ + void *rbuf2 = NULL; /* Buffer for reading raw data */ + H5D_space_status_t space_status; /* Dataset's raw dataspace status */ + H5D_space_status_t space_status2; /* Dataset's raw dataspace status */ + + /* Check the datatypes are equal */ + + /* Open the datatype for the source dataset */ + if((tid = H5Dget_type(did)) < 0) TEST_ERROR + + /* Open the datatype for the destination dataset */ + if((tid2 = H5Dget_type(did2)) < 0) TEST_ERROR + + /* Check that both datatypes are committed/not committed */ + if((is_committed = H5Tcommitted(tid)) < 0) TEST_ERROR + if((is_committed2 = H5Tcommitted(tid2)) < 0) TEST_ERROR + if(is_committed != is_committed2) TEST_ERROR + + /* Compare the datatypes */ + if(H5Tequal(tid, tid2) != TRUE) TEST_ERROR + + /* Determine the size of datatype (for later) */ + if((elmt_size = H5Tget_size(tid)) == 0) TEST_ERROR + + + /* Check the dataspaces are equal */ + + /* Open the dataspace for the source dataset */ + if((sid = H5Dget_space(did)) < 0) TEST_ERROR + + /* Open the dataspace for the destination dataset */ + if((sid2 = H5Dget_space(did2)) < 0) TEST_ERROR + + /* Compare the dataspaces */ + if(H5Sextent_equal(sid, sid2) != TRUE) TEST_ERROR + + /* Determine the number of elements in dataspace (for later) */ + if((nelmts = H5Sget_simple_extent_npoints(sid)) < 0) TEST_ERROR + + + /* Check the dataset creation property lists are equal */ + + /* Open the dataset creation property list for the source dataset */ + if((dcpl = H5Dget_create_plist(did)) < 0) TEST_ERROR + + /* Open the dataset creation property list for the destination dataset */ + if((dcpl2 = H5Dget_create_plist(did2)) < 0) TEST_ERROR + + /* Compare the rest of the dataset creation property lists */ + if(H5Pequal(dcpl, dcpl2) != TRUE) TEST_ERROR + + /* Get the number of filters on dataset (for later) */ + if((nfilters = H5Pget_nfilters(dcpl)) < 0) TEST_ERROR + + /* close the source dataset creation property list */ + if(H5Pclose(dcpl) < 0) TEST_ERROR + + /* close the destination dataset creation property list */ + if(H5Pclose(dcpl2) < 0) TEST_ERROR + + + /* Check the allocated storage is the same */ + + /* Check that the space allocation status is the same */ + if(H5Dget_space_status(did, &space_status) < 0) TEST_ERROR + if(H5Dget_space_status(did2, &space_status2) < 0) TEST_ERROR + if(space_status != space_status2) TEST_ERROR + + /* Check that the space used is the same */ + /* (Don't check if the dataset is filtered (i.e. compressed, etc.) and + * the datatype is VLEN, since the addresses for the vlen + * data in each dataset will (probably) be different and the storage + * size will thus vary) + */ + if(!(nfilters > 0 && (H5Tdetect_class(tid, H5T_VLEN) || + (H5Tdetect_class(tid, H5T_REFERENCE) && H5Tequal(tid, H5T_STD_REF))))) { + hsize_t storage_size = H5Dget_storage_size(did); /* Dataset's raw data storage size */ + hsize_t storage_size2 = H5Dget_storage_size(did2); /* 2nd Dataset's raw data storage size */ + + if(storage_size != storage_size2) TEST_ERROR + } /* end if */ + + /* Check the raw data is equal */ + + /* Allocate & initialize space for the raw data buffers */ + if((rbuf = HDcalloc( elmt_size, (size_t)nelmts)) == NULL) TEST_ERROR + if((rbuf2 = HDcalloc( elmt_size, (size_t)nelmts)) == NULL) TEST_ERROR + + /* Read data from datasets */ + if(H5Dread(did, tid, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf) < 0) TEST_ERROR + if(H5Dread(did2, tid2, H5S_ALL, H5S_ALL, H5P_DEFAULT, rbuf2) < 0) TEST_ERROR + + /* Check raw data read in against data written out */ + if(wbuf) { + if(!compare_data(did, (hid_t)0, pid, tid, (size_t)nelmts, wbuf, rbuf, did)) TEST_ERROR + if(!compare_data(did2, (hid_t)0, pid, tid2, (size_t)nelmts, wbuf, rbuf2, did2)) TEST_ERROR + } /* end if */ + /* Don't have written data, just compare data between the two datasets */ + else + if(!compare_data(did, did2, pid, tid, (size_t)nelmts, rbuf, rbuf2, did)) TEST_ERROR + + /* Reclaim vlen data, if necessary */ + if(H5Tdetect_class(tid, H5T_VLEN) == TRUE || H5Tdetect_class(tid, H5T_REFERENCE) == TRUE) + if(H5Treclaim(tid, sid, H5P_DEFAULT, rbuf) < 0) TEST_ERROR + if(H5Tdetect_class(tid2, H5T_VLEN) == TRUE || H5Tdetect_class(tid2, H5T_REFERENCE) == TRUE) + if(H5Treclaim(tid2, sid2, H5P_DEFAULT, rbuf2) < 0) TEST_ERROR + + /* Release raw data buffers */ + HDfree(rbuf); + rbuf = NULL; + HDfree(rbuf2); + rbuf2 = NULL; + + /* close the source dataspace */ + if(H5Sclose(sid) < 0) TEST_ERROR + + /* close the destination dataspace */ + if(H5Sclose(sid2) < 0) TEST_ERROR + + /* close the source datatype */ + if(H5Tclose(tid) < 0) TEST_ERROR + + /* close the destination datatype */ + if(H5Tclose(tid2) < 0) TEST_ERROR + + + /* Check if the attributes are equal */ + if(compare_std_attributes(did, did2, pid) != TRUE) TEST_ERROR + + + /* Datasets should be the same. :-) */ + return TRUE; + +error: + H5E_BEGIN_TRY { + if(rbuf) + HDfree(rbuf); + if(rbuf2) + HDfree(rbuf2); + H5Pclose(dcpl2); + H5Pclose(dcpl); + H5Sclose(sid2); + H5Sclose(sid); + H5Tclose(tid2); + H5Tclose(tid); + } H5E_END_TRY; + return FALSE; +} /* end compare_datasets() */ + + +/*------------------------------------------------------------------------- + * Function: compare_groups + * + * Purpose: Compare two groups to check that they are "equal" + * + * Return: TRUE if group are equal/FALSE if they are different + * + * Programmer: Quincey Koziol + * Monday, October 31, 2005 + * + *------------------------------------------------------------------------- + */ +static int +compare_groups(hid_t gid, hid_t gid2, hid_t pid, int depth, unsigned copy_flags) +{ + H5G_info_t ginfo; /* Group info struct */ + H5G_info_t ginfo2; /* Group info struct */ + hsize_t idx; /* Index over the objects in group */ + unsigned cpy_flags; /* Object copy flags */ + + /* Retrieve the object copy flags from the property list, if it's non-DEFAULT */ + if(pid != H5P_DEFAULT) { + if(H5Pget_copy_object(pid, &cpy_flags) < 0) TEST_ERROR + } /* end if */ + else + cpy_flags = 0; + + /* Check if both groups have the same # of objects */ + if(H5Gget_info(gid, &ginfo) < 0) TEST_ERROR + if(H5Gget_info(gid2, &ginfo2) < 0) TEST_ERROR + if((cpy_flags & H5O_COPY_SHALLOW_HIERARCHY_FLAG) && depth == 0) { + if(ginfo2.nlinks != 0) TEST_ERROR + } /* end if */ + else { + if(ginfo.nlinks != ginfo2.nlinks) TEST_ERROR + } /* end if */ + + /* Check contents of groups */ + if(ginfo2.nlinks > 0) { + char objname[NAME_BUF_SIZE]; /* Name of object in group */ + char objname2[NAME_BUF_SIZE]; /* Name of object in group */ + H5L_info_t linfo; /* Link information */ + H5L_info_t linfo2; /* Link information */ + + /* Loop over contents of groups */ + for(idx = 0; idx < ginfo.nlinks; idx++) { + /* Check name of objects */ + if(H5Lget_name_by_idx(gid, ".", H5_INDEX_NAME, H5_ITER_INC, idx, objname, (size_t)NAME_BUF_SIZE, H5P_DEFAULT) < 0) TEST_ERROR + if(H5Lget_name_by_idx(gid2, ".", H5_INDEX_NAME, H5_ITER_INC, idx, objname2, (size_t)NAME_BUF_SIZE, H5P_DEFAULT) < 0) TEST_ERROR + if(HDstrcmp(objname, objname2)) TEST_ERROR + + /* Get link info */ + if(H5Lget_info(gid, objname, &linfo, H5P_DEFAULT) < 0) TEST_ERROR + if(H5Lget_info(gid2, objname2, &linfo2, H5P_DEFAULT) < 0) TEST_ERROR + if(linfo.type != linfo2.type) TEST_ERROR + + /* Extra checks for "real" objects */ + if(linfo.type == H5L_TYPE_HARD) { + hid_t oid, oid2; /* IDs of objects within group */ + H5O_info_t oinfo, oinfo2; /* Object info */ + + /* Compare some pieces of the object info */ + if(H5Oget_info_by_name2(gid, objname, &oinfo, H5O_INFO_BASIC|H5O_INFO_HDR, H5P_DEFAULT) < 0) TEST_ERROR + if(H5Oget_info_by_name2(gid2, objname2, &oinfo2, H5O_INFO_BASIC|H5O_INFO_HDR, H5P_DEFAULT) < 0) TEST_ERROR + + if(oinfo.type != oinfo2.type) TEST_ERROR + if(oinfo.rc != oinfo2.rc) TEST_ERROR + + /* If NULL messages are preserved, the number of messages + * should be the same in the destination. + * Otherwise, it should simply be true that the number + * of messages hasn't increased. + */ + if(H5O_COPY_PRESERVE_NULL_FLAG & copy_flags) { + if(oinfo.hdr.nmesgs != oinfo2.hdr.nmesgs) + ; + else + if(oinfo.hdr.nmesgs < oinfo2.hdr.nmesgs) TEST_ERROR + } + + /* Check for object already having been compared */ + if(addr_lookup(&oinfo)) + continue; + else + addr_insert(&oinfo); + + /* Open objects */ + if((oid = H5Oopen(gid, objname, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + if((oid2 = H5Oopen(gid2, objname2, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + /* Compare objects within group */ + switch(oinfo.type) { + case H5O_TYPE_GROUP: + /* Compare groups */ + if(compare_groups(oid, oid2, pid, depth - 1, copy_flags) != TRUE) TEST_ERROR + break; + + case H5O_TYPE_DATASET: + /* Compare datasets */ + if(compare_datasets(oid, oid2, pid, NULL) != TRUE) TEST_ERROR + break; + + case H5O_TYPE_NAMED_DATATYPE: + /* Compare datatypes */ + if(H5Tequal(oid, oid2) != TRUE) TEST_ERROR + break; + + case H5O_TYPE_MAP: + HDassert(0 && "maps not supported in native VOL connector"); + + case H5O_TYPE_UNKNOWN: + case H5O_TYPE_NTYPES: + default: + HDassert(0 && "Unknown type of object"); + break; + } /* end switch */ + + /* Close objects */ + if(H5Oclose(oid) < 0) TEST_ERROR + if(H5Oclose(oid2) < 0) TEST_ERROR + } /* end if */ + else { + /* Check that both links are the same size */ + if(linfo.u.val_size != linfo2.u.val_size) TEST_ERROR + + /* Compare link values */ + if(linfo.type == H5L_TYPE_SOFT || + (linfo.type >= H5L_TYPE_UD_MIN && linfo.type <= H5L_TYPE_MAX)) { + char linkval[NAME_BUF_SIZE]; /* Link value */ + char linkval2[NAME_BUF_SIZE]; /* Link value */ + + /* Get link values */ + HDassert(linfo.u.val_size <= NAME_BUF_SIZE); + if(H5Lget_val(gid, objname, linkval, (size_t)NAME_BUF_SIZE, H5P_DEFAULT) < 0) TEST_ERROR + if(H5Lget_val(gid2, objname2, linkval2, (size_t)NAME_BUF_SIZE, H5P_DEFAULT) < 0) TEST_ERROR + + /* Compare link data */ + if(HDmemcmp(linkval, linkval2, linfo.u.val_size)) TEST_ERROR + } /* end else-if */ + else { +HDassert(0 && "Unknown type of link"); + } /* end else */ + } /* end else */ + } /* end for */ + } /* end if */ + + /* Check if the attributes are equal */ + if(compare_std_attributes(gid, gid2, pid) != TRUE) TEST_ERROR + + /* Groups should be the same. :-) */ + return TRUE; + +error: + H5E_BEGIN_TRY { + } H5E_END_TRY; + return FALSE; +} /* end compare_groups() */ + +/*------------------------------------------------------------------------- + * Function: test_copy_option + * + * Purpose: Create a group in SRC file and copy it to DST file + * + * Return: Success: 0 + * Failure: number of errors + * + * Programmer: Peter Cao + * March 11, 2006 + * + *------------------------------------------------------------------------- + */ +static int +test_copy_option(hid_t fcpl_src, hid_t fcpl_dst, hid_t src_fapl, hid_t dst_fapl, + unsigned flag, hbool_t crt_intermediate_grp, const char* test_desciption) +{ + hid_t fid_src = -1, fid_dst = -1, fid_ext = -1; /* File IDs */ + hid_t sid = -1; /* Dataspace ID */ + hid_t did = -1; /* Dataset ID */ + hid_t gid=-1, gid2=-1, gid_ref=-1; /* Group IDs */ + hid_t gid_sub=-1, gid_sub_sub=-1; /* Sub-group ID */ + hid_t pid=-1, lcpl_id=-1; /* Property IDs */ + unsigned cpy_flags; /* Object copy flags */ + int depth = -1; /* Copy depth */ + hsize_t dim2d[2]; + int buf[DIM_SIZE_1][DIM_SIZE_2]; + int i, j; + char src_filename[NAME_BUF_SIZE]; + char dst_filename[NAME_BUF_SIZE]; + + TESTING(test_desciption); + + /* set initial data values */ + for (i=0; i<DIM_SIZE_1; i++) + for (j=0; j<DIM_SIZE_2; j++) + buf[i][j] = 10000 + 100*i+j; + + /* Initialize the filenames */ + h5_fixname(FILENAME[0], src_fapl, src_filename, sizeof src_filename); + h5_fixname(FILENAME[1], dst_fapl, dst_filename, sizeof dst_filename); + + /* Reset file address checking info */ + addr_reset(); + + /* create source file */ + if((fid_src = H5Fcreate(src_filename, H5F_ACC_TRUNC, fcpl_src, src_fapl)) < 0) TEST_ERROR + + /* create group at the SRC file */ + if((gid = H5Gcreate2(fid_src, NAME_GROUP_TOP, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + /* attach attributes to the group */ + if(test_copy_attach_attributes(gid, H5T_NATIVE_INT) < 0) TEST_ERROR + + /* Set dataspace dimensions */ + dim2d[0]=DIM_SIZE_1; + dim2d[1]=DIM_SIZE_2; + + /* create dataspace */ + if((sid = H5Screate_simple(2, dim2d, NULL)) < 0) TEST_ERROR + + /* add a dataset to the top group */ + if((did = H5Dcreate2(gid, NAME_DATASET_SIMPLE, H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(did, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0) TEST_ERROR + if(H5Dclose(did) < 0) TEST_ERROR + + /* create a sub-group */ + if((gid_sub = H5Gcreate2(fid_src, NAME_GROUP_SUB, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + /* add a dataset to the sub group */ + if((did = H5Dcreate2(gid_sub, NAME_DATASET_SIMPLE, H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(did, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0) TEST_ERROR + if(H5Dclose(did) < 0) TEST_ERROR + + /* create sub-sub-group */ + if((gid_sub_sub = H5Gcreate2(gid_sub, NAME_GROUP_SUB_SUB2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + /* add a dataset to the sub sub group */ + if((did = H5Dcreate2(gid_sub_sub, NAME_DATASET_SIMPLE, H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(did, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0) TEST_ERROR + + /* close dataset */ + if(H5Dclose(did) < 0) TEST_ERROR + + /* close dataspace */ + if(H5Sclose(sid) < 0) TEST_ERROR + + if(H5Gclose(gid_sub_sub) < 0) TEST_ERROR + + if(H5Gclose(gid_sub) < 0) TEST_ERROR + + /* close the group */ + if(H5Gclose(gid) < 0) FAIL_STACK_ERROR + + if((flag & H5O_COPY_EXPAND_SOFT_LINK_FLAG) > 0) { + /* Create group to copy */ + if((gid = H5Gcreate2(fid_src, NAME_GROUP_LINK, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + if(H5Lcreate_soft(NAME_DATASET_SUB_SUB, fid_src, NAME_LINK_SOFT, H5P_DEFAULT, H5P_DEFAULT) < 0) FAIL_STACK_ERROR + if(H5Lcreate_soft("nowhere", fid_src, NAME_LINK_SOFT_DANGLE, H5P_DEFAULT, H5P_DEFAULT) < 0) FAIL_STACK_ERROR + if(H5Gclose(gid) < 0) FAIL_STACK_ERROR + + /* Create group to compare with */ + if((gid = H5Gcreate2(fid_src, NAME_GROUP_LINK2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + if(H5Lcreate_hard(fid_src, NAME_DATASET_SUB_SUB, H5L_SAME_LOC, NAME_LINK_SOFT2, H5P_DEFAULT, H5P_DEFAULT) < 0) FAIL_STACK_ERROR + if(H5Lcreate_soft("nowhere", fid_src, NAME_LINK_SOFT_DANGLE2, H5P_DEFAULT, H5P_DEFAULT) < 0) FAIL_STACK_ERROR + if(H5Gclose(gid) < 0) FAIL_STACK_ERROR + } /* end if */ + + if((flag & H5O_COPY_EXPAND_EXT_LINK_FLAG) > 0) { + char ext_filename[NAME_BUF_SIZE]; + + h5_fixname(FILENAME[2], src_fapl, ext_filename, sizeof ext_filename); + + /* Create the external file and dataset */ + if((fid_ext = H5Fcreate(ext_filename, H5F_ACC_TRUNC, fcpl_src, src_fapl)) < 0) TEST_ERROR + if((sid = H5Screate_simple(2, dim2d, NULL)) < 0) TEST_ERROR + if((did = H5Dcreate2(fid_ext, NAME_DATASET_SIMPLE, H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(did, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0) TEST_ERROR + if(H5Dclose(did) < 0) TEST_ERROR + if(H5Fclose(fid_ext) < 0) TEST_ERROR + + /* Create group to copy */ + if(!(flag & H5O_COPY_EXPAND_SOFT_LINK_FLAG)) { + if((gid = H5Gcreate2(fid_src, NAME_GROUP_LINK, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + } /* end if */ + else + if((gid = H5Gopen2(fid_src, NAME_GROUP_LINK, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Lcreate_external(ext_filename, NAME_DATASET_SIMPLE, fid_src, NAME_LINK_EXTERN, H5P_DEFAULT, H5P_DEFAULT) < 0) TEST_ERROR + if(H5Lcreate_external("no_file", "no_object", fid_src, NAME_LINK_EXTERN_DANGLE, H5P_DEFAULT, H5P_DEFAULT) < 0) TEST_ERROR + if(H5Gclose(gid) < 0) TEST_ERROR + + /* Create group to compare with */ + if(!(flag & H5O_COPY_EXPAND_SOFT_LINK_FLAG)) { + if((gid = H5Gcreate2(fid_src, NAME_GROUP_LINK2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + } /* end if */ + else + if((gid = H5Gopen2(fid_src, NAME_GROUP_LINK2, H5P_DEFAULT)) < 0) TEST_ERROR + if((did = H5Dcreate2(fid_src, NAME_LINK_EXTERN2, H5T_NATIVE_INT, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + if(H5Dwrite(did, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0) TEST_ERROR + if(H5Lcreate_external("no_file", "no_object", fid_src, NAME_LINK_EXTERN_DANGLE2, H5P_DEFAULT, H5P_DEFAULT) < 0) TEST_ERROR + if(H5Dclose(did) < 0) TEST_ERROR + if(H5Gclose(gid) < 0) TEST_ERROR + + /* Close dataspace */ + if(H5Sclose(sid) < 0) TEST_ERROR + } /* end if */ + + if((flag & H5O_COPY_EXPAND_REFERENCE_FLAG) > 0) { + if((gid_ref = H5Gcreate2(fid_src, NAME_GROUP_REF, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + /* create an attribute of new object references */ + if(attach_ref_attr(fid_src, gid_ref) < 0) TEST_ERROR + + /* create an attribute of region references */ + if(attach_reg_ref_attr(fid_src, gid_ref) < 0) TEST_ERROR + + /* create a dataset of region references */ + if(create_reg_ref_dataset(fid_src, gid_ref) < 0) TEST_ERROR + + /* Close group holding reference objects */ + if(H5Gclose(gid_ref) < 0) TEST_ERROR + } /* end if */ + + /* close the SRC file */ + if(H5Fclose(fid_src) < 0) TEST_ERROR + + /* open the source file with read-only */ + /* (except when expanding soft links */ + if((flag & H5O_COPY_EXPAND_SOFT_LINK_FLAG) > 0) { + if((fid_src = H5Fopen(src_filename, H5F_ACC_RDWR, src_fapl)) < 0) TEST_ERROR + } /* end if */ + else + if((fid_src = H5Fopen(src_filename, H5F_ACC_RDONLY, src_fapl)) < 0) TEST_ERROR + + /* create destination file */ + if((fid_dst = H5Fcreate(dst_filename, H5F_ACC_TRUNC, fcpl_dst, dst_fapl)) < 0) TEST_ERROR + + /* Create an uncopied object in destination file so that addresses in source and destination + files aren't the same */ + if(H5Gclose(H5Gcreate2(fid_dst, NAME_GROUP_UNCOPIED, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0) TEST_ERROR + + /* create property to pass copy options */ + if((pid = H5Pcreate(H5P_OBJECT_COPY)) < 0) TEST_ERROR + + /* set options for object copy */ + if(H5Pset_copy_object(pid, flag) < 0) TEST_ERROR + + /* Verify object copy flags */ + if(H5Pget_copy_object(pid, &cpy_flags) < 0) TEST_ERROR + if(cpy_flags != flag) TEST_ERROR + + /* copy the group from SRC to DST */ + if(crt_intermediate_grp) { + /* Create link creation plist to pass in intermediate group creation */ + if((lcpl_id = H5Pcreate(H5P_LINK_CREATE)) < 0) TEST_ERROR + if(H5Pset_create_intermediate_group(lcpl_id, TRUE) < 0) TEST_ERROR + + if(H5Ocopy(fid_src, NAME_GROUP_TOP, fid_dst, "/new_g0/new_g00", pid, lcpl_id) < 0) TEST_ERROR + + if(H5Pclose(lcpl_id) < 0) TEST_ERROR + + /* open the group for copy */ + if((gid = H5Gopen2(fid_src, NAME_GROUP_TOP, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + /* open the destination group */ + if((gid2 = H5Gopen2(fid_dst, "/new_g0/new_g00", H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + } else if(((flag & H5O_COPY_EXPAND_SOFT_LINK_FLAG) > 0) + || ((flag & H5O_COPY_EXPAND_EXT_LINK_FLAG) > 0)) { + if(H5Ocopy(fid_src, NAME_GROUP_LINK, fid_dst, NAME_GROUP_LINK, pid, H5P_DEFAULT) < 0) TEST_ERROR + + if((flag & H5O_COPY_EXPAND_SOFT_LINK_FLAG) > 0) + /* Unlink dataset to copy from original location */ + /* (So group comparison works properly) */ + if(H5Ldelete(fid_src, NAME_DATASET_SUB_SUB, H5P_DEFAULT) < 0) FAIL_STACK_ERROR + + /* open the group for copy */ + if((gid = H5Gopen2(fid_src, NAME_GROUP_LINK2, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + /* open the destination group */ + if((gid2 = H5Gopen2(fid_dst, NAME_GROUP_LINK, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + } else if(flag & (H5O_COPY_WITHOUT_ATTR_FLAG | H5O_COPY_PRESERVE_NULL_FLAG)) { + if(H5Ocopy(fid_src, NAME_GROUP_TOP, fid_dst, NAME_GROUP_TOP, pid, H5P_DEFAULT) < 0) TEST_ERROR + + /* open the group for copy */ + if((gid = H5Gopen2(fid_src, NAME_GROUP_TOP, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + /* open the destination group */ + if((gid2 = H5Gopen2(fid_dst, NAME_GROUP_TOP, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + } else if(flag & H5O_COPY_SHALLOW_HIERARCHY_FLAG) { + if(H5Ocopy(fid_src, NAME_GROUP_TOP, fid_dst, NAME_GROUP_TOP, pid, H5P_DEFAULT) < 0) TEST_ERROR + + /* open the group for copy */ + if((gid = H5Gopen2(fid_src, NAME_GROUP_TOP, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + /* open the destination group */ + if((gid2 = H5Gopen2(fid_dst, NAME_GROUP_TOP, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + /* Set the copy depth */ + depth = 1; + } else if((flag & H5O_COPY_EXPAND_REFERENCE_FLAG) > 0) { + if(H5Ocopy(fid_src, NAME_GROUP_REF, fid_dst, NAME_GROUP_REF, pid, H5P_DEFAULT) < 0) TEST_ERROR + + /* open the group for copy */ + if((gid = H5Gopen2(fid_src, NAME_GROUP_REF, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + + /* open the destination group */ + if((gid2 = H5Gopen2(fid_dst, NAME_GROUP_REF, H5P_DEFAULT)) < 0) FAIL_STACK_ERROR + } else { + /* Unknown flag */ + TEST_ERROR + } /* end else */ + + /* Check if the groups are equal */ + if(compare_groups(gid, gid2, pid, depth, flag) != TRUE) TEST_ERROR + if(H5Gclose(gid2) < 0) TEST_ERROR + if(H5Gclose(gid) < 0) TEST_ERROR + + /* close the SRC file */ + if(H5Fclose(fid_src) < 0) TEST_ERROR + + /* close the DST file */ + if(H5Fclose(fid_dst) < 0) TEST_ERROR + + /* close properties */ + if(H5Pclose(pid) < 0) TEST_ERROR + + PASSED(); + return 0; + +error: + H5E_BEGIN_TRY { + H5Pclose(lcpl_id); + H5Pclose(pid); + H5Sclose(sid); + H5Dclose(did); + H5Gclose(gid_ref); + H5Gclose(gid_sub); + H5Gclose(gid2); + H5Gclose(gid); + H5Fclose(fid_dst); + H5Fclose(fid_src); + H5Fclose(fid_ext); + } H5E_END_TRY; + return 1; +} /* end test_copy_option */ + +/*------------------------------------------------------------------------- + * Function: main + * + * Purpose: Test H5Ocopy() + * + * Tests a number of cases: messages can be stored in the + * new or old format, messages can be shared in either, + * both, or neither of the source and destination files. + * + * Return: EXIT_SUCCESS/EXIT_FAILURE + * + * Programmer: Peter Cao + * Friday, September 30, 2005 + * + *------------------------------------------------------------------------- + */ +int +main(void) +{ + int nerrors = 0; + hid_t fapl, fapl2; + hid_t fcpl_shared, ocpl; + unsigned max_compact, min_dense; + int configuration; /* Configuration of tests. */ + int ExpressMode; + hbool_t same_file; /* Whether to run tests that only use one file */ + + /* Setup */ + h5_reset(); + fapl = h5_fileaccess(); + + ExpressMode = GetTestExpress(); + if (ExpressMode > 1) + HDprintf("***Express test mode on. Some tests may be skipped\n"); + + /* Copy the file access property list */ + if((fapl2 = H5Pcopy(fapl)) < 0) TEST_ERROR + + /* Set the "use the latest version of the format" bounds for creating objects in the file */ + if(H5Pset_libver_bounds(fapl2, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) TEST_ERROR + + /* Create an FCPL with sharing enabled */ + if((fcpl_shared = H5Pcreate(H5P_FILE_CREATE)) < 0) TEST_ERROR + if(H5Pset_shared_mesg_nindexes(fcpl_shared, 1) < 0) TEST_ERROR + if(H5Pset_shared_mesg_index(fcpl_shared, 0, H5O_SHMESG_ALL_FLAG, 10) < 0) TEST_ERROR + + /* Obtain the default attribute storage phase change values */ + if((ocpl = H5Pcreate(H5P_OBJECT_CREATE)) < 0) TEST_ERROR + if(H5Pget_attr_phase_change(ocpl, &max_compact, &min_dense) < 0) TEST_ERROR + if(H5Pclose(ocpl) < 0) TEST_ERROR + + /* Test in all configurations */ + for(configuration = 0; configuration <= MAX_CONFIGURATION; configuration++) { + hid_t src_fapl; + hid_t dst_fapl; + hid_t fcpl_src; + hid_t fcpl_dst; + + /* Start with same_file == TRUE. Use source file settings for these + * tests. Don't run with a non-default destination file setting, as + * destination settings have no effect. */ + same_file = TRUE; + + /* No need to test dense attributes with old format */ + if(!(configuration & CONFIG_SRC_NEW_FORMAT) && (configuration & CONFIG_DENSE)) + continue; + + /* TODO Region references currently do not support copy from new format to old format + * (this may be fixed once H5Sencode/decode and H5CXis fixed) */ + if((configuration & CONFIG_SRC_NEW_FORMAT) && !(configuration & CONFIG_DST_NEW_FORMAT)) + continue; + + /* Test with and without shared messages */ + if(configuration & CONFIG_SHARE_SRC) { + HDputs("\nTesting with shared src messages:"); + fcpl_src = fcpl_shared; + } + else { + HDputs("\nTesting without shared src messages:"); + fcpl_src = H5P_DEFAULT; + } + if(configuration & CONFIG_SHARE_DST) { + HDputs("Testing with shared dst messages:"); + fcpl_dst = fcpl_shared; + same_file = FALSE; + } + else { + HDputs("Testing without shared dst messages:"); + fcpl_dst = H5P_DEFAULT; + } + + /* Set the FAPL for the source file's type of format */ + if(configuration & CONFIG_SRC_NEW_FORMAT) { + HDputs("Testing with latest format for source file:"); + src_fapl = fapl2; + + /* Test with and without dense attributes */ + if(configuration & CONFIG_DENSE) { + HDputs("Testing with dense attributes:"); + num_attributes_g = max_compact + 1; + } + else { + HDputs("Testing without dense attributes:"); + num_attributes_g = MAX(min_dense, 2) - 2; + } + } /* end if */ + else { + HDputs("Testing with oldest file format for source file:"); + src_fapl = fapl; + num_attributes_g = 4; + } /* end else */ + + /* Set the FAPL for the destination file's type of format */ + if(configuration & CONFIG_DST_NEW_FORMAT) { + HDputs("Testing with latest format for destination file:"); + dst_fapl = fapl2; + same_file = FALSE; + } /* end if */ + else { + HDputs("Testing with oldest file format for destination file:"); + dst_fapl = fapl; + } /* end else */ + + /* The tests... */ + nerrors += test_copy_option(fcpl_src, fcpl_dst, src_fapl, dst_fapl, + H5O_COPY_EXPAND_REFERENCE_FLAG, + FALSE, "H5Ocopy(): expand object reference"); + } /* end for */ + + /* Reset file address checking info */ + addr_reset(); + + /* Verify symbol table messages are cached */ + nerrors += (h5_verify_cached_stabs(FILENAME, fapl) < 0 ? 1 : 0); + + /* Results */ + if(nerrors) { + HDprintf("***** %d OBJECT COPY TEST%s FAILED! *****\n", + nerrors, (1 == nerrors ? "" : "S")); + HDexit(EXIT_FAILURE); + } /* end if */ + + HDputs ("All object copying tests passed."); + + /* close property list. + * NOTE: if this property list is not closed and the test is + * run with the split or multi driver, an interesting + * problem is exposed in the property list shutdown code. + * + * Namely, since the split/multi driver copies property + * lists for internal use, there's a (high) chance that + * leaving the FAPL open and having the library's shutdown + * code close it will cause the underlying property lists + * to be cleaned up first, causing the actual property list + * close operation to fail (since it won't be able to close + * the already closed underlying property list). + * + * The could be addressed by converting the split/multi to + * use non-public API routines, or putting some way into the + * public H5I routines to indicate ordering at shutdown. + * + * For now, we just make certain to close the property list. + * (QAK - 2016/04/06) + * + */ + H5Pclose(fapl2); + + h5_cleanup(FILENAME, fapl); + + HDexit(EXIT_SUCCESS); + +error: + HDexit(EXIT_FAILURE); +} /* main */ + |