diff options
Diffstat (limited to 'test/tselect.c')
| -rw-r--r-- | test/tselect.c | 1214 |
1 files changed, 611 insertions, 603 deletions
diff --git a/test/tselect.c b/test/tselect.c index bcc2a5b..9150b11 100644 --- a/test/tselect.c +++ b/test/tselect.c @@ -1888,9 +1888,9 @@ test_select_hyper_contig_dr__run_test(int test_num, const uint16_t *cube_buf, /* verify that H5S_select_shape_same() reports the two * selections as having the same shape. */ - check = H5S_select_shape_same_test(small_cube_sid, + check = H5S__select_shape_same_test(small_cube_sid, file_large_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Read selection from disk */ ret = H5Dread(large_cube_dataset, @@ -1965,9 +1965,9 @@ test_select_hyper_contig_dr__run_test(int test_num, const uint16_t *cube_buf, /* verify that H5S_select_shape_same() reports the two * selections as having the same shape. */ - check = H5S_select_shape_same_test(small_cube_sid, + check = H5S__select_shape_same_test(small_cube_sid, mem_large_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Read selection from disk */ @@ -2082,9 +2082,9 @@ test_select_hyper_contig_dr__run_test(int test_num, const uint16_t *cube_buf, * memory slice through the cube selection and the * on disk full small cube selections as having the same shape. */ - check = H5S_select_shape_same_test(small_cube_sid, + check = H5S__select_shape_same_test(small_cube_sid, mem_large_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* write the slice from the in memory large cube to the on disk small cube */ @@ -2193,9 +2193,9 @@ test_select_hyper_contig_dr__run_test(int test_num, const uint16_t *cube_buf, * on disk slice through the large cube selection * as having the same shape. */ - check = H5S_select_shape_same_test(small_cube_sid, + check = H5S__select_shape_same_test(small_cube_sid, file_large_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* write the cube from memory to the target slice of the disk cube */ @@ -2998,9 +2998,9 @@ test_select_hyper_checker_board_dr__run_test(int test_num, const uint16_t *cube_ /* verify that H5S_select_shape_same() reports the two * selections as having the same shape. */ - check = H5S_select_shape_same_test(mem_small_cube_sid, + check = H5S__select_shape_same_test(mem_small_cube_sid, file_large_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* zero the buffer that we will be using for reading */ HDmemset(small_cube_buf_1, 0, sizeof(*small_cube_buf_1) * small_cube_size); @@ -3105,9 +3105,9 @@ test_select_hyper_checker_board_dr__run_test(int test_num, const uint16_t *cube_ /* verify that H5S_select_shape_same() reports the two * selections as having the same shape. */ - check = H5S_select_shape_same_test(file_small_cube_sid, + check = H5S__select_shape_same_test(file_small_cube_sid, mem_large_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* zero out the in memory large cube */ @@ -3258,9 +3258,9 @@ test_select_hyper_checker_board_dr__run_test(int test_num, const uint16_t *cube_ /* verify that H5S_select_shape_same() reports the two * selections as having the same shape. */ - check = H5S_select_shape_same_test(file_small_cube_sid, + check = H5S__select_shape_same_test(file_small_cube_sid, mem_large_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* write the slice from the in memory large cube to the @@ -3390,9 +3390,9 @@ test_select_hyper_checker_board_dr__run_test(int test_num, const uint16_t *cube_ /* verify that H5S_select_shape_same() reports the two * selections as having the same shape. */ - check = H5S_select_shape_same_test(file_large_cube_sid, + check = H5S__select_shape_same_test(file_large_cube_sid, mem_small_cube_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* write the checker board selection of the in memory @@ -3525,13 +3525,13 @@ test_select_hyper_checker_board_dr__run_test(int test_num, const uint16_t *cube_ /**************************************************************** ** -** test_select_hyper_checker_board_dr(): Test H5S (dataspace) -** selection code with checkerboard source and target having +** test_select_hyper_checker_board_dr(): Test H5S (dataspace) +** selection code with checkerboard source and target having ** different ranks but the same shape. We have already -** tested H5S_shape_same in isolation, so now we try to do +** tested H5S_shape_same in isolation, so now we try to do ** I/O. ** -** This is just an initial smoke check, so we will work +** This is just an initial smoke check, so we will work ** with a slice through a cube only. ** ****************************************************************/ @@ -5902,6 +5902,10 @@ test_select_hyper_union_random_5d(hid_t read_plist) /* Select hyperslab */ ret = H5Sselect_hyperslab(sid1, (i == 0 ? H5S_SELECT_SET : H5S_SELECT_OR), start, NULL, count, NULL); CHECK(ret, FAIL, "H5Sselect_hyperslab"); + if(ret < 0) { + TestErrPrintf("Random hyperslabs for seed %u failed!\n", seed); + break; + } /* end if */ } /* end for */ /* Get the number of elements selected */ @@ -5920,14 +5924,18 @@ test_select_hyper_union_random_5d(hid_t read_plist) /* Read selection from disk */ ret=H5Dread(dataset,H5T_NATIVE_INT,sid2,sid1,read_plist,rbuf); CHECK(ret, FAIL, "H5Dread"); + if(ret < 0) { + TestErrPrintf("Random hyperslabs for seed %u failed!\n", seed); + break; + } /* end if */ /* Compare data read with data written out */ tbuf=rbuf; ret = H5Diterate(wbuf,H5T_NATIVE_INT,sid1,test_select_hyper_iter2,&tbuf); - if(ret<0) { - TestErrPrintf("Random hyperslabs for seed %u failed!\n",seed); + if(ret < 0) { + TestErrPrintf("Random hyperslabs for seed %u failed!\n", seed); break; - } + } /* end if */ /* Set the read buffer back to all zeroes */ HDmemset(rbuf, 0, (size_t)SPACE6_DIM1); @@ -6585,7 +6593,7 @@ test_select_combine(void) hsize_t dims[SPACE7_RANK]={SPACE7_DIM1,SPACE7_DIM2}; /* Dimensions of dataspace */ H5S_sel_type sel_type; /* Selection type */ hssize_t nblocks; /* Number of hyperslab blocks */ - hsize_t blocks[128][2][SPACE7_RANK]; /* List of blocks */ + hsize_t blocks[16][2][SPACE7_RANK]; /* List of blocks */ herr_t error; /* Output message about test being performed */ @@ -8087,290 +8095,290 @@ test_shape_same(void) /* Compare "all" selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(all_sid,all_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,all_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(all_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(all_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(all_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(all_sid,single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(all_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(all_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(all_sid,single_hyper_all_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,single_hyper_all_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(all_sid,single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(all_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(all_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(all_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(all_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(all_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(all_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare "none" selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(none_sid,none_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,none_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(none_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(none_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(none_sid,all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(none_sid,single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(none_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(none_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(none_sid,single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(none_sid,single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(none_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(none_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(none_sid,none_hyper_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid,none_hyper_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(none_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(none_sid, scalar_none_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(none_sid, scalar_none_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare single point selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(single_pt_sid,single_pt_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,single_pt_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(single_pt_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(single_pt_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(single_pt_sid,all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(single_pt_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(single_pt_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(single_pt_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(single_pt_sid,single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(single_pt_sid,single_hyper_pt_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,single_hyper_pt_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(single_pt_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(single_pt_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(single_pt_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(single_pt_sid, scalar_all_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid, scalar_all_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(single_pt_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_pt_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare multiple point selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(mult_pt_sid,mult_pt_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,mult_pt_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(mult_pt_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(mult_pt_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(mult_pt_sid,all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(mult_pt_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(mult_pt_sid,single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(mult_pt_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(mult_pt_sid,single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(mult_pt_sid,single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(mult_pt_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(mult_pt_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(mult_pt_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(mult_pt_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(mult_pt_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(mult_pt_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare single "normal" hyperslab selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(single_hyper_sid,single_hyper_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,single_hyper_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(single_hyper_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(single_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(single_hyper_sid,all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(single_hyper_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(single_hyper_sid,single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(single_hyper_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_sid,single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_sid,single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); #ifdef NOT_YET /* In theory, these two selections are the same shape, but the @@ -8394,8 +8402,8 @@ test_shape_same(void) } /* end for */ /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); @@ -8421,70 +8429,70 @@ test_shape_same(void) } /* end for */ /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(single_hyper_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(single_hyper_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare single "all" hyperslab selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(single_hyper_all_sid,single_hyper_all_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,single_hyper_all_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(single_hyper_all_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(single_hyper_all_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,all_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,all_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); #ifdef NOT_YET /* In theory, these two selections are the same shape, but the @@ -8508,8 +8516,8 @@ test_shape_same(void) } /* end for */ /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); @@ -8535,129 +8543,129 @@ test_shape_same(void) } /* end for */ /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_all_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(single_hyper_all_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(single_hyper_all_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_all_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare single "point" hyperslab selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,single_hyper_pt_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,single_hyper_pt_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(single_hyper_pt_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(single_hyper_pt_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,single_pt_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,single_pt_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(single_hyper_pt_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(single_hyper_pt_sid, scalar_all_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid, scalar_all_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(single_hyper_pt_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(single_hyper_pt_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare regular, strided hyperslab selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(regular_hyper_sid,regular_hyper_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,regular_hyper_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(regular_hyper_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(regular_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Construct point selection which matches regular, strided hyperslab selection */ /* Create dataspace for point selection */ @@ -8674,8 +8682,8 @@ test_shape_same(void) } /* end for */ /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); @@ -8700,8 +8708,8 @@ test_shape_same(void) } /* end for */ /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); @@ -8720,70 +8728,70 @@ test_shape_same(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(regular_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(regular_hyper_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(regular_hyper_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(regular_hyper_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare irregular hyperslab selection to all the selections created */ /* Compare against itself */ - check=H5S_select_shape_same_test(irreg_hyper_sid,irreg_hyper_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,irreg_hyper_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid=H5Scopy(irreg_hyper_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check=H5S_select_shape_same_test(irreg_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Construct hyperslab selection which matches irregular hyperslab selection */ /* Create dataspace for hyperslab selection */ @@ -8808,141 +8816,141 @@ test_shape_same(void) } /* end for */ /* Compare against hyperslab selection */ - check=H5S_select_shape_same_test(irreg_hyper_sid,tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid,tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(irreg_hyper_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(irreg_hyper_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(irreg_hyper_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare scalar "all" dataspace with all selections created */ /* Compare against itself */ - check = H5S_select_shape_same_test(scalar_all_sid, scalar_all_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, scalar_all_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid = H5Scopy(scalar_all_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check = H5S_select_shape_same_test(scalar_all_sid, tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check = H5S_select_shape_same_test(scalar_all_sid, all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check = H5S_select_shape_same_test(scalar_all_sid, none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check = H5S_select_shape_same_test(scalar_all_sid, single_pt_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, single_pt_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check = H5S_select_shape_same_test(scalar_all_sid, mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check = H5S_select_shape_same_test(scalar_all_sid, single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check = H5S_select_shape_same_test(scalar_all_sid, single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check = H5S_select_shape_same_test(scalar_all_sid, single_hyper_pt_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, single_hyper_pt_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check = H5S_select_shape_same_test(scalar_all_sid, regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check = H5S_select_shape_same_test(scalar_all_sid, irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check = H5S_select_shape_same_test(scalar_all_sid, none_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, none_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against scalar "none" hyperslab selection */ - check = H5S_select_shape_same_test(scalar_all_sid, scalar_none_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_all_sid, scalar_none_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare scalar "none" dataspace with all selections created */ /* Compare against itself */ - check = H5S_select_shape_same_test(scalar_none_sid, scalar_none_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, scalar_none_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against copy of itself */ tmp_sid = H5Scopy(scalar_none_sid); CHECK(tmp_sid, FAIL, "H5Scopy"); - check = H5S_select_shape_same_test(scalar_none_sid, tmp_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, tmp_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); ret = H5Sclose(tmp_sid); CHECK(ret, FAIL, "H5Sclose"); /* Compare against "all" selection */ - check = H5S_select_shape_same_test(scalar_none_sid, all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "none" selection */ - check = H5S_select_shape_same_test(scalar_none_sid, none_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, none_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against single point selection */ - check = H5S_select_shape_same_test(scalar_none_sid, single_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, single_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against multiple point selection */ - check = H5S_select_shape_same_test(scalar_none_sid, mult_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, mult_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "plain" single hyperslab selection */ - check = H5S_select_shape_same_test(scalar_none_sid, single_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, single_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "all" single hyperslab selection */ - check = H5S_select_shape_same_test(scalar_none_sid, single_hyper_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, single_hyper_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "single point" single hyperslab selection */ - check = H5S_select_shape_same_test(scalar_none_sid, single_hyper_pt_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, single_hyper_pt_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against regular, strided hyperslab selection */ - check = H5S_select_shape_same_test(scalar_none_sid, regular_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, regular_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against irregular hyperslab selection */ - check = H5S_select_shape_same_test(scalar_none_sid, irreg_hyper_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, irreg_hyper_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "no" hyperslab selection */ - check = H5S_select_shape_same_test(scalar_none_sid, none_hyper_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, none_hyper_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Compare against scalar "all" hyperslab selection */ - check = H5S_select_shape_same_test(scalar_none_sid, scalar_all_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(scalar_none_sid, scalar_all_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Close dataspaces */ @@ -8974,27 +8982,27 @@ test_shape_same(void) /**************************************************************** ** -** test_shape_same_dr__smoke_check_1(): +** test_shape_same_dr__smoke_check_1(): ** -** Create a square, 2 D data space (10 X 10), and select +** Create a square, 2 D data space (10 X 10), and select ** all of it. ** -** Similarly, create nine, 3 D data spaces (10 X 10 X 10), -** and select (10 X 10 X 1) hyper slabs in each, three with -** the slab parallel to the xy plane, three parallel to the +** Similarly, create nine, 3 D data spaces (10 X 10 X 10), +** and select (10 X 10 X 1) hyper slabs in each, three with +** the slab parallel to the xy plane, three parallel to the ** xz plane, and three parallel to the yz plane. ** -** Assuming that z is the fastest changing dimension, -** H5S_select_shape_same() should return TRUE when comparing -** the full 2 D space against any hyperslab parallel to the -** yz plane in the 3 D space, and FALSE when comparing the +** Assuming that z is the fastest changing dimension, +** H5S_select_shape_same() should return TRUE when comparing +** the full 2 D space against any hyperslab parallel to the +** yz plane in the 3 D space, and FALSE when comparing the ** full 2 D space against the other two hyper slabs. ** -** Also create two additional 3 D data spaces (10 X 10 X 10), -** and select a (10 X 10 X 2) hyper slab parallel to the yz -** axis in one of them, and two parallel (10 X 10 X 1) hyper -** slabs parallel to the yz axis in the other. -** H5S_select_shape_same() should return FALSE when comparing +** Also create two additional 3 D data spaces (10 X 10 X 10), +** and select a (10 X 10 X 2) hyper slab parallel to the yz +** axis in one of them, and two parallel (10 X 10 X 1) hyper +** slabs parallel to the yz axis in the other. +** H5S_select_shape_same() should return FALSE when comparing ** each to the 2 D selection. ** ****************************************************************/ @@ -9183,42 +9191,42 @@ test_shape_same_dr__smoke_check_1(void) /* setup is done -- run the tests: */ /* Compare against "xy" selection */ - check = H5S_select_shape_same_test(small_cube_xy_slice_0_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_0_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xy_slice_1_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_1_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xy_slice_2_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_2_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "xz" selection */ - check = H5S_select_shape_same_test(small_cube_xz_slice_0_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_0_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xz_slice_1_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_1_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xz_slice_2_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_2_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "yz" selection */ - check = H5S_select_shape_same_test(small_cube_yz_slice_0_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_0_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_1_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_1_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_2_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_2_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_3_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_3_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_4_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_4_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Close dataspaces */ @@ -9265,9 +9273,9 @@ test_shape_same_dr__smoke_check_1(void) /**************************************************************** ** -** test_shape_same_dr__smoke_check_2(): +** test_shape_same_dr__smoke_check_2(): ** -** Create a square, 2 D data space (10 X 10), and select +** Create a square, 2 D data space (10 X 10), and select ** a "checker board" hyper slab as follows: ** ** * * - - * * - - * * @@ -9281,27 +9289,27 @@ test_shape_same_dr__smoke_check_1(void) ** * * - - * * - - * * ** * * - - * * - - * * ** -** where asterisks indicate selected elements, and dashes +** where asterisks indicate selected elements, and dashes ** indicate unselected elements. ** -** Similarly, create nine, 3 D data spaces (10 X 10 X 10), -** and select similar (10 X 10 X 1) checker board hyper -** slabs in each, three with the slab parallel to the xy -** plane, three parallel to the xz plane, and three parallel +** Similarly, create nine, 3 D data spaces (10 X 10 X 10), +** and select similar (10 X 10 X 1) checker board hyper +** slabs in each, three with the slab parallel to the xy +** plane, three parallel to the xz plane, and three parallel ** to the yz plane. ** -** Assuming that z is the fastest changing dimension, -** H5S_select_shape_same() should return TRUE when comparing -** the 2 D space checker board selection against a checker -** board hyperslab parallel to the yz plane in the 3 D -** space, and FALSE when comparing the 2 D checkerboard -** selection against two hyper slabs parallel to the xy +** Assuming that z is the fastest changing dimension, +** H5S_select_shape_same() should return TRUE when comparing +** the 2 D space checker board selection against a checker +** board hyperslab parallel to the yz plane in the 3 D +** space, and FALSE when comparing the 2 D checkerboard +** selection against two hyper slabs parallel to the xy ** or xz planes. ** -** Also create an additional 3 D data spaces (10 X 10 X 10), -** and select a checker board parallel with the yz axis, -** save with some squares being on different planes. -** H5S_select_shape_same() should return FALSE when +** Also create an additional 3 D data spaces (10 X 10 X 10), +** and select a checker board parallel with the yz axis, +** save with some squares being on different planes. +** H5S_select_shape_same() should return FALSE when ** comparing this selection to the 2 D selection. ** ****************************************************************/ @@ -9584,7 +9592,7 @@ test_shape_same_dr__smoke_check_2(void) start[0] = 4; /* This test gets the right answer, but it fails the shape same - * test in an unexpected point. Bring this up with Quincey, as + * test in an unexpected point. Bring this up with Quincey, as * the oddness looks like it is not related to my code. * -- JRM */ @@ -9596,39 +9604,39 @@ test_shape_same_dr__smoke_check_2(void) /* setup is done -- run the tests: */ /* Compare against "xy" selection */ - check = H5S_select_shape_same_test(small_cube_xy_slice_0_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_0_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xy_slice_1_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_1_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xy_slice_2_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_2_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "xz" selection */ - check = H5S_select_shape_same_test(small_cube_xz_slice_0_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_0_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xz_slice_1_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_1_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xz_slice_2_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_2_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "yz" selection */ - check = H5S_select_shape_same_test(small_cube_yz_slice_0_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_0_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_1_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_1_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_2_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_2_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_3_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_3_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Close dataspaces */ @@ -9673,9 +9681,9 @@ test_shape_same_dr__smoke_check_2(void) /**************************************************************** ** -** test_shape_same_dr__smoke_check_3(): +** test_shape_same_dr__smoke_check_3(): ** -** Create a square, 2 D data space (10 X 10), and select an +** Create a square, 2 D data space (10 X 10), and select an ** irregular hyper slab as follows: ** ** y @@ -9691,22 +9699,22 @@ test_shape_same_dr__smoke_check_2(void) ** 0 - - - - - - - - - - ** 0 1 2 3 4 5 6 7 8 9 x ** -** where asterisks indicate selected elements, and dashes +** where asterisks indicate selected elements, and dashes ** indicate unselected elements. ** -** Similarly, create nine, 3 D data spaces (10 X 10 X 10), -** and select similar irregular hyper slabs in each, three -** with the slab parallel to the xy plane, three parallel -** to the xz plane, and three parallel to the yz plane. -** Further, translate the irregular slab in 2/3rds of the +** Similarly, create nine, 3 D data spaces (10 X 10 X 10), +** and select similar irregular hyper slabs in each, three +** with the slab parallel to the xy plane, three parallel +** to the xz plane, and three parallel to the yz plane. +** Further, translate the irregular slab in 2/3rds of the ** cases. ** -** Assuming that z is the fastest changing dimension, -** H5S_select_shape_same() should return TRUE when -** comparing the 2 D irregular hyperslab selection -** against the irregular hyperslab selections parallel -** to the yz plane in the 3 D space, and FALSE when -** comparing it against the irregular hyper slabs +** Assuming that z is the fastest changing dimension, +** H5S_select_shape_same() should return TRUE when +** comparing the 2 D irregular hyperslab selection +** against the irregular hyperslab selections parallel +** to the yz plane in the 3 D space, and FALSE when +** comparing it against the irregular hyper slabs ** selections parallel to the xy or xz planes. ** ****************************************************************/ @@ -10119,36 +10127,36 @@ test_shape_same_dr__smoke_check_3(void) /* setup is done -- run the tests: */ /* Compare against "xy" selection */ - check = H5S_select_shape_same_test(small_cube_xy_slice_0_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_0_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xy_slice_1_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_1_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xy_slice_2_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xy_slice_2_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "xz" selection */ - check = H5S_select_shape_same_test(small_cube_xz_slice_0_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_0_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xz_slice_1_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_1_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_xz_slice_2_sid, small_square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_xz_slice_2_sid, small_square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Compare against "yz" selection */ - check = H5S_select_shape_same_test(small_cube_yz_slice_0_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_0_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_1_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_1_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(small_cube_yz_slice_2_sid, small_square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(small_cube_yz_slice_2_sid, small_square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); /* Close dataspaces */ @@ -10190,9 +10198,9 @@ test_shape_same_dr__smoke_check_3(void) /**************************************************************** ** -** test_shape_same_dr__smoke_check_4(): +** test_shape_same_dr__smoke_check_4(): ** -** Create a square, 2 D data space (10 X 10), and select +** Create a square, 2 D data space (10 X 10), and select ** the entire space. ** ** Similarly, create 3 D and 4 D data spaces: @@ -10213,7 +10221,7 @@ test_shape_same_dr__smoke_check_3(void) ** And select these entire spaces as well. ** ** Compare the 2 D space against all the other spaces -** with H5S_select_shape_same(). The (1 X 10 X 10) & +** with H5S_select_shape_same(). The (1 X 10 X 10) & ** (1 X 1 X 10 X 10) should return TRUE. All others ** should return FALSE. ** @@ -10331,39 +10339,39 @@ test_shape_same_dr__smoke_check_4(void) /* setup is done -- run the tests: */ - check = H5S_select_shape_same_test(three_d_space_0_sid, square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(three_d_space_0_sid, square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(three_d_space_1_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(three_d_space_1_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(three_d_space_2_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(three_d_space_2_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(three_d_space_3_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(three_d_space_3_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(four_d_space_0_sid, square_sid); - VERIFY(check, TRUE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(four_d_space_0_sid, square_sid); + VERIFY(check, TRUE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(four_d_space_1_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(four_d_space_1_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(four_d_space_2_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(four_d_space_2_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(four_d_space_3_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(four_d_space_3_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(four_d_space_4_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(four_d_space_4_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(four_d_space_5_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(four_d_space_5_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); - check = H5S_select_shape_same_test(four_d_space_6_sid, square_sid); - VERIFY(check, FALSE, "H5S_select_shape_same_test"); + check = H5S__select_shape_same_test(four_d_space_6_sid, square_sid); + VERIFY(check, FALSE, "H5S__select_shape_same_test"); /* Close dataspaces */ @@ -10410,12 +10418,12 @@ test_shape_same_dr__smoke_check_4(void) /**************************************************************** ** ** test_shape_same_dr__full_space_vs_slice(): Tests selection -** of a full n-cube data space vs an n-dimensional slice of -** of an m-cube (m > n) in a call to H5S_select_shape_same(). -** Note that this test does not require the n-cube and the +** of a full n-cube data space vs an n-dimensional slice of +** of an m-cube (m > n) in a call to H5S_select_shape_same(). +** Note that this test does not require the n-cube and the ** n-dimensional slice to have the same rank (although -** H5S_select_shape_same() should always return FALSE if -** they don't). +** H5S_select_shape_same() should always return FALSE if +** they don't). ** ** Per Quincey's suggestion, only test up to 5 dimensional ** spaces. @@ -10452,16 +10460,16 @@ test_shape_same_dr__full_space_vs_slice(int test_num, HDassert( large_rank <= SS_DR_MAX_RANK ); HDassert( 0 <= offset ); HDassert( offset < large_rank ); - HDassert( edge_size > 0 ); - HDassert( edge_size <= 1000 ); + HDassert( edge_size > 0 ); + HDassert( edge_size <= 1000 ); - sprintf(test_desc_0, - "\tn-cube slice through m-cube (n <= m) test %d.\n", + sprintf(test_desc_0, + "\tn-cube slice through m-cube (n <= m) test %d.\n", test_num); MESSAGE(7, (test_desc_0)); /* This statement must be updated if SS_DR_MAX_RANK is changed */ - sprintf(test_desc_1, + sprintf(test_desc_1, "\t\tranks: %d/%d offset: %d dim_selected: %d/%d/%d/%d/%d.\n", small_rank, large_rank, offset, (int)dim_selected[0], @@ -10526,7 +10534,7 @@ test_shape_same_dr__full_space_vs_slice(int test_num, /* setup is done -- run the test: */ - check = H5S_select_shape_same_test(n_cube_0_sid, n_cube_1_sid); + check = H5S__select_shape_same_test(n_cube_0_sid, n_cube_1_sid); VERIFY(check, expected_result, "test_shape_same_dr__full_space_vs_slice"); @@ -10542,27 +10550,27 @@ test_shape_same_dr__full_space_vs_slice(int test_num, /**************************************************************** ** -** test_shape_same_dr__run_full_space_vs_slice_tests(): +** test_shape_same_dr__run_full_space_vs_slice_tests(): ** ** Run the est_shape_same_dr__full_space_vs_slice() test ** over a variety of ranks and offsets. ** -** At present, we test H5S_select_shape_same() with +** At present, we test H5S_select_shape_same() with ** fully selected 1, 2, 3, and 4 cubes as one parameter, and ** 1, 2, 3, and 4 dimensional slices through a n-cube of rank -** no more than 5 (and at least the rank of the slice). -** We stop at rank 5, as Quincey suggested that it would be +** no more than 5 (and at least the rank of the slice). +** We stop at rank 5, as Quincey suggested that it would be ** sufficient. ** -** All the n-cubes will have lengths of the same size, so +** All the n-cubes will have lengths of the same size, so ** H5S_select_shape_same() should return true iff: ** -** 1) the rank for the fully selected n cube equals the +** 1) the rank for the fully selected n cube equals the ** number of dimensions selected in the slice through the ** m-cube (m >= n). ** ** 2) The dimensions selected in the slice through the m-cube -** are the dimesnions with the most quickly changing +** are the dimesnions with the most quickly changing ** indices. ** ****************************************************************/ @@ -10668,7 +10676,7 @@ test_shape_same_dr__run_full_space_vs_slice_tests(void) dim_selected, expected_result ); - + z++; } while((z < 2) && (large_rank >= 1)); @@ -10691,15 +10699,15 @@ test_shape_same_dr__run_full_space_vs_slice_tests(void) /**************************************************************** ** -** test_shape_same_dr__checkerboard(): Tests selection of a -** "checker board" subset of a full n-cube data space vs +** test_shape_same_dr__checkerboard(): Tests selection of a +** "checker board" subset of a full n-cube data space vs ** a "checker board" n-dimensional slice of an m-cube (m > n). -** in a call to H5S_select_shape_same(). +** in a call to H5S_select_shape_same(). ** -** Note that this test does not require the n-cube and the +** Note that this test does not require the n-cube and the ** n-dimensional slice to have the same rank (although -** H5S_select_shape_same() should always return FALSE if -** they don't). +** H5S_select_shape_same() should always return FALSE if +** they don't). ** ** Per Quincey's suggestion, only test up to 5 dimensional ** spaces. @@ -10719,11 +10727,11 @@ test_shape_same_dr__checkerboard(int test_num, char test_desc_1[128]; int i; int dims_selected = 0; - hid_t n_cube_0_sid; /* the checker board selected - * hyper cube + hid_t n_cube_0_sid; /* the checker board selected + * hyper cube */ - hid_t n_cube_1_sid; /* the hyper cube in which a - * checkerboard slice is selected + hid_t n_cube_1_sid; /* the hyper cube in which a + * checkerboard slice is selected */ hsize_t dims[SS_DR_MAX_RANK]; hsize_t base_start[2]; @@ -10745,8 +10753,8 @@ test_shape_same_dr__checkerboard(int test_num, HDassert( small_rank <= large_rank ); HDassert( large_rank <= SS_DR_MAX_RANK ); HDassert( 0 < checker_size ); - HDassert( checker_size <= edge_size ); - HDassert( edge_size <= 1000 ); + HDassert( checker_size <= edge_size ); + HDassert( edge_size <= 1000 ); HDassert( 0 <= offset ); HDassert( offset < (int)edge_size ); @@ -10757,13 +10765,13 @@ test_shape_same_dr__checkerboard(int test_num, HDassert( dims_selected >= 0 ); HDassert( dims_selected <= large_rank ); - sprintf(test_desc_0, - "\tcheckerboard n-cube slice through m-cube (n <= m) test %d.\n", + sprintf(test_desc_0, + "\tcheckerboard n-cube slice through m-cube (n <= m) test %d.\n", test_num); MESSAGE(7, (test_desc_0)); /* This statement must be updated if SS_DR_MAX_RANK is changed */ - sprintf(test_desc_1, + sprintf(test_desc_1, "\tranks: %d/%d edge/chkr size: %d/%d offset: %d dim_selected: %d/%d/%d/%d/%d:%d.\n", small_rank, large_rank, (int)edge_size, (int)checker_size, @@ -10803,17 +10811,17 @@ test_shape_same_dr__checkerboard(int test_num, * * * - - * * - - * * * * * - - * * - - * * * - * In both cases, asterisks indicate selected elements, + * In both cases, asterisks indicate selected elements, * and dashes indicate unselected elements. * * 3-D and 4-D ascii art is somewhat painful, so I'll * leave those selections to your imagination. :-) * * Note, that since the edge_size and checker_size are - * parameters that are passed in, the selection need + * parameters that are passed in, the selection need * not look exactly like the selection shown above. - * At present, the function allows checker sizes that - * are not even divisors of the edge size -- thus + * At present, the function allows checker sizes that + * are not even divisors of the edge size -- thus * something like the following is also possible: * * * * * - - - * * * - @@ -10827,14 +10835,14 @@ test_shape_same_dr__checkerboard(int test_num, * * * * - - - * * * - * - - - * * * - - - * * - * As the above pattern can't be selected in one + * As the above pattern can't be selected in one * call to H5Sselect_hyperslab(), and since the * values in the start, stride, count, and block - * arrays will be repeated over all entries in + * arrays will be repeated over all entries in * the selected space case, and over all selected * dimensions in the selected hyperslab case, we - * compute these values first and store them in - * in the base_start, base_stride, base_count, + * compute these values first and store them in + * in the base_start, base_stride, base_count, * and base_block arrays. */ @@ -10844,9 +10852,9 @@ test_shape_same_dr__checkerboard(int test_num, base_stride[0] = 2 * checker_size; base_stride[1] = 2 * checker_size; - /* Note that the following computation depends on the C99 - * requirement that integer division discard any fraction - * (truncation towards zero) to function correctly. As we + /* Note that the following computation depends on the C99 + * requirement that integer division discard any fraction + * (truncation towards zero) to function correctly. As we * now require C99, this shouldn't be a problem, but noting * it may save us some pain if we are ever obliged to support * pre-C99 compilers again. @@ -10863,7 +10871,7 @@ test_shape_same_dr__checkerboard(int test_num, base_block[0] = checker_size; base_block[1] = checker_size; - /* now setup start, stride, count, and block arrays for + /* now setup start, stride, count, and block arrays for * the first call to H5Sselect_hyperslab(). */ for(i = 0; i < SS_DR_MAX_RANK; i++) { @@ -10877,10 +10885,10 @@ test_shape_same_dr__checkerboard(int test_num, start, stride, count, block); CHECK(ret, FAIL, "H5Sselect_hyperslab"); - /* if small_rank == 1, or if edge_size == checker_size, we + /* if small_rank == 1, or if edge_size == checker_size, we * are done, as either there is no added dimension in which * to place offset selected "checkers". - * + * * Otherwise, set up start, stride, count and block, and * make the additional selection. */ @@ -10900,7 +10908,7 @@ test_shape_same_dr__checkerboard(int test_num, /* Wierdness alert: * - * Some how, it seems that selections can extend beyond the + * Some how, it seems that selections can extend beyond the * boundaries of the target data space -- hence the following * code to manually clip the selection back to the data space * proper. @@ -10923,8 +10931,8 @@ test_shape_same_dr__checkerboard(int test_num, /* Now select the checkerboard selection in the (possibly larger) n-cube. - * - * Since we have already calculated the base start, stride, count, + * + * Since we have already calculated the base start, stride, count, * and block, re-use the values in setting up start, stride, count, * and block. */ @@ -10968,10 +10976,10 @@ test_shape_same_dr__checkerboard(int test_num, start_ptr, stride_ptr, count_ptr, block_ptr); CHECK(ret, FAIL, "H5Sselect_hyperslab"); - /* As before, if the number of dimensions selected is less than or - * equal to 1, or if edge_size == checker_size, we are done, as - * either there is no added dimension in which to place offset selected - * "checkers", or the hyperslab is completely occupied by one + /* As before, if the number of dimensions selected is less than or + * equal to 1, or if edge_size == checker_size, we are done, as + * either there is no added dimension in which to place offset selected + * "checkers", or the hyperslab is completely occupied by one * "checker". * * Otherwise, set up start, stride, count and block, and @@ -11001,7 +11009,7 @@ test_shape_same_dr__checkerboard(int test_num, /* Wierdness alert: * - * Again, it seems that selections can extend beyond the + * Again, it seems that selections can extend beyond the * boundaries of the target data space -- hence the following * code to manually clip the selection back to the data space * proper. @@ -11018,7 +11026,7 @@ test_shape_same_dr__checkerboard(int test_num, CHECK(ret, FAIL, "H5Sselect_hyperslab"); /* setup is done -- run the test: */ - check = H5S_select_shape_same_test(n_cube_0_sid, n_cube_1_sid); + check = H5S__select_shape_same_test(n_cube_0_sid, n_cube_1_sid); VERIFY(check, expected_result, "test_shape_same_dr__checkerboard"); @@ -11034,23 +11042,23 @@ test_shape_same_dr__checkerboard(int test_num, /**************************************************************** ** -** test_shape_same_dr__run_checkerboard_tests(): +** test_shape_same_dr__run_checkerboard_tests(): ** -** In this set of tests, we test H5S_select_shape_same() -** with a "checkerboard" selection of 1, 2, 3, and 4 cubes as -** one parameter, and 1, 2, 3, and 4 dimensional checkerboard -** slices through a n-cube of rank no more than 5 (and at -** least the rank of the slice). +** In this set of tests, we test H5S_select_shape_same() +** with a "checkerboard" selection of 1, 2, 3, and 4 cubes as +** one parameter, and 1, 2, 3, and 4 dimensional checkerboard +** slices through a n-cube of rank no more than 5 (and at +** least the rank of the slice). ** -** All the n-cubes will have lengths of the same size, so +** All the n-cubes will have lengths of the same size, so ** H5S_select_shape_same() should return true iff: ** -** 1) the rank of the n cube equals the number of dimensions -** selected in the checker board slice through the m-cube +** 1) the rank of the n cube equals the number of dimensions +** selected in the checker board slice through the m-cube ** (m >= n). ** -** 2) The dimensions selected in the checkerboard slice -** through the m-cube are the dimensions with the most +** 2) The dimensions selected in the checkerboard slice +** through the m-cube are the dimensions with the most ** quickly changing indices. ** ****************************************************************/ @@ -11101,7 +11109,7 @@ test_shape_same_dr__run_checkerboard_tests(void) dim_selected[4] = FALSE; else dim_selected[4] = TRUE; - + /* compute the expected result: */ i = 0; @@ -11305,17 +11313,17 @@ test_shape_same_dr__run_checkerboard_tests(void) /**************************************************************** ** -** test_shape_same_dr__irregular(): +** test_shape_same_dr__irregular(): ** -** Tests selection of an "irregular" subset of a full +** Tests selection of an "irregular" subset of a full ** n-cube data space vs an identical "irregular" subset ** of an n-dimensional slice of an m-cube (m > n). -** in a call to H5S_select_shape_same(). +** in a call to H5S_select_shape_same(). ** -** Note that this test does not require the n-cube and the +** Note that this test does not require the n-cube and the ** n-dimensional slice to have the same rank (although -** H5S_select_shape_same() should always return FALSE if -** they don't). +** H5S_select_shape_same() should always return FALSE if +** they don't). ** ****************************************************************/ static void @@ -11337,7 +11345,7 @@ test_shape_same_dr__irregular(int test_num, hid_t n_cube_0_sid; /* the hyper cube containing * an irregular selection */ - hid_t n_cube_1_sid; /* the hyper cube in which a + hid_t n_cube_1_sid; /* the hyper cube in which a * slice contains an irregular * selection. */ @@ -11373,7 +11381,7 @@ test_shape_same_dr__irregular(int test_num, hsize_t clip_block[SS_DR_MAX_RANK] = {10, 10, 10, 10, 10}; - hsize_t *(starts[SS_DR_MAX_RANK]) = + hsize_t *(starts[SS_DR_MAX_RANK]) = {start_0, start_1, start_2, start_3, start_4}; hsize_t *(strides[SS_DR_MAX_RANK]) = {stride_0, stride_1, stride_2, stride_3, stride_4}; @@ -11396,8 +11404,8 @@ test_shape_same_dr__irregular(int test_num, HDassert( 0 < small_rank ); HDassert( small_rank <= large_rank ); HDassert( large_rank <= SS_DR_MAX_RANK ); - HDassert( 9 <= edge_size ); - HDassert( edge_size <= 1000 ); + HDassert( 9 <= edge_size ); + HDassert( edge_size <= 1000 ); HDassert( 0 <= slice_offset ); HDassert( slice_offset < edge_size ); HDassert( -2 <= pattern_offset ); @@ -11410,16 +11418,16 @@ test_shape_same_dr__irregular(int test_num, HDassert( dims_selected >= 0 ); HDassert( dims_selected <= large_rank ); - sprintf(test_desc_0, - "\tirregular sub set of n-cube slice through m-cube (n <= m) test %d.\n", + sprintf(test_desc_0, + "\tirregular sub set of n-cube slice through m-cube (n <= m) test %d.\n", test_num); MESSAGE(7, (test_desc_0)); /* This statement must be updated if SS_DR_MAX_RANK is changed */ - sprintf(test_desc_1, + sprintf(test_desc_1, "\tranks: %d/%d edge: %d s/p offset: %d/%d dim_selected: %d/%d/%d/%d/%d:%d.\n", small_rank, large_rank, - edge_size, + edge_size, slice_offset, pattern_offset, (int)dim_selected[0], (int)dim_selected[1], @@ -11438,11 +11446,11 @@ test_shape_same_dr__irregular(int test_num, CHECK(n_cube_0_sid, FAIL, "H5Screate_simple"); /* Select an "irregular" pattern in the small n-cube. This - * pattern can be though of a set of four 3 x 2 x 2 X 2 - * four dimensional prisims, each parallel to one of the - * axies and none of them intersecting with the other. + * pattern can be though of a set of four 3 x 2 x 2 X 2 + * four dimensional prisims, each parallel to one of the + * axies and none of them intersecting with the other. * - * In the lesser dimensional cases, this 4D pattern is + * In the lesser dimensional cases, this 4D pattern is * projected onto the lower dimensional space. * * In the 1-D case, the projection of the pattern looks @@ -11467,12 +11475,12 @@ test_shape_same_dr__irregular(int test_num, * 0 - - - - - - - - - - * 0 1 2 3 4 5 6 7 8 9 x * - * In both cases, asterisks indicate selected elements, + * In both cases, asterisks indicate selected elements, * and dashes indicate unselected elements. * * Note that is this case, since the edge size is fixed, - * the pattern does not change. However, we do use the - * displacement parameter to allow it to be moved around + * the pattern does not change. However, we do use the + * displacement parameter to allow it to be moved around * within the n-cube or hyper slab. */ @@ -11487,7 +11495,7 @@ test_shape_same_dr__irregular(int test_num, CHECK(ret, FAIL, "H5Sselect_hyperslab"); } /* end for */ - /* finally, clip the selection to ensure that it lies fully + /* finally, clip the selection to ensure that it lies fully * within the n-cube. */ ret = H5Sselect_hyperslab(n_cube_0_sid, H5S_SELECT_AND, @@ -11526,8 +11534,8 @@ test_shape_same_dr__irregular(int test_num, /* Now select the irregular selection in the (possibly larger) n-cube. - * - * Basic idea is to project the pattern used in the smaller n-cube + * + * Basic idea is to project the pattern used in the smaller n-cube * onto the dimensions selected in the larger n-cube, with the displacement * specified. */ @@ -11564,7 +11572,7 @@ test_shape_same_dr__irregular(int test_num, /* setup is done -- run the test: */ - check = H5S_select_shape_same_test(n_cube_0_sid, n_cube_1_sid); + check = H5S__select_shape_same_test(n_cube_0_sid, n_cube_1_sid); VERIFY(check, expected_result, "test_shape_same_dr__checkerboard"); @@ -11580,25 +11588,25 @@ test_shape_same_dr__irregular(int test_num, /**************************************************************** ** -** test_shape_same_dr__run_irregular_tests(): +** test_shape_same_dr__run_irregular_tests(): ** -** In this set of tests, we test H5S_select_shape_same() -** with an "irregular" subselection of 1, 2, 3, and 4 cubes as -** one parameter, and irregular subselections of 1, 2, 3, -** and 4 dimensional slices through a n-cube of rank no more -** than 5 (and at least the rank of the slice) as the other. -** Note that the "irregular" selection may be offset between +** In this set of tests, we test H5S_select_shape_same() +** with an "irregular" subselection of 1, 2, 3, and 4 cubes as +** one parameter, and irregular subselections of 1, 2, 3, +** and 4 dimensional slices through a n-cube of rank no more +** than 5 (and at least the rank of the slice) as the other. +** Note that the "irregular" selection may be offset between ** the n-cube and the slice. ** ** All the irregular selections will be identical (modulo rank) ** so H5S_select_shape_same() should return true iff: ** -** 1) the rank of the n cube equals the number of dimensions -** selected in the irregular slice through the m-cube +** 1) the rank of the n cube equals the number of dimensions +** selected in the irregular slice through the m-cube ** (m >= n). ** -** 2) The dimensions selected in the irregular slice -** through the m-cube are the dimensions with the most +** 2) The dimensions selected in the irregular slice +** through the m-cube are the dimensions with the most ** quickly changing indices. ** ****************************************************************/ @@ -11649,7 +11657,7 @@ test_shape_same_dr__run_irregular_tests(void) dim_selected[4] = FALSE; else dim_selected[4] = TRUE; - + /* compute the expected result: */ i = 0; @@ -11795,8 +11803,8 @@ test_shape_same_dr__run_irregular_tests(void) /**************************************************************** ** -** test_shape_same_dr(): Tests selections on dataspace with -** different ranks, to verify that "shape same" routine +** test_shape_same_dr(): Tests selections on dataspace with +** different ranks, to verify that "shape same" routine ** is now handling this case correctly. ** ****************************************************************/ @@ -11913,7 +11921,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = FALSE; - rebuild_stat = H5S_get_rebuild_status_test(sid_reg1); + rebuild_stat = H5S__get_rebuild_status_test(sid_reg1); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be TRUE. */ if(!rebuild_stat){ @@ -11922,7 +11930,7 @@ test_space_rebuild(void) } else { /* In this case, rebuild_check should be TRUE. */ - rebuild_check = H5S_select_shape_same_test(sid_reg1,sid_reg_ori1); + rebuild_check = H5S__select_shape_same_test(sid_reg1,sid_reg_ori1); CHECK(rebuild_check,FALSE,"H5S_hyper_rebuild"); } @@ -11945,7 +11953,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = TRUE; - rebuild_stat = H5S_get_rebuild_status_test(sid_irreg1); + rebuild_stat = H5S__get_rebuild_status_test(sid_irreg1); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be FALSE. */ if(rebuild_stat){ @@ -11992,7 +12000,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = FALSE; - rebuild_stat = H5S_get_rebuild_status_test(sid_reg2); + rebuild_stat = H5S__get_rebuild_status_test(sid_reg2); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be TRUE. */ if(!rebuild_stat){ @@ -12001,7 +12009,7 @@ test_space_rebuild(void) } else { /* In this case, rebuild_check should be TRUE. */ - rebuild_check = H5S_select_shape_same_test(sid_reg2,sid_reg_ori2); + rebuild_check = H5S__select_shape_same_test(sid_reg2,sid_reg_ori2); CHECK(rebuild_check,FALSE,"H5S_hyper_rebuild"); } @@ -12029,7 +12037,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = TRUE; - rebuild_stat = H5S_get_rebuild_status_test(sid_irreg2); + rebuild_stat = H5S__get_rebuild_status_test(sid_irreg2); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be FALSE. */ if(rebuild_stat){ @@ -12081,7 +12089,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = FALSE; - rebuild_stat = H5S_get_rebuild_status_test(sid_reg3); + rebuild_stat = H5S__get_rebuild_status_test(sid_reg3); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be TRUE. */ @@ -12091,7 +12099,7 @@ test_space_rebuild(void) } else { /* In this case, rebuild_check should be TRUE. */ - rebuild_check = H5S_select_shape_same_test(sid_reg3,sid_reg_ori3); + rebuild_check = H5S__select_shape_same_test(sid_reg3,sid_reg_ori3); CHECK(rebuild_check,FALSE,"H5S_hyper_rebuild"); } @@ -12124,7 +12132,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = TRUE; - rebuild_stat = H5S_get_rebuild_status_test(sid_irreg3); + rebuild_stat = H5S__get_rebuild_status_test(sid_irreg3); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be FALSE. */ if(rebuild_stat){ @@ -12184,7 +12192,7 @@ test_space_rebuild(void) rebuild_stat = FALSE; - rebuild_stat = H5S_get_rebuild_status_test(sid_reg4); + rebuild_stat = H5S__get_rebuild_status_test(sid_reg4); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be TRUE. */ if(!rebuild_stat){ @@ -12193,7 +12201,7 @@ test_space_rebuild(void) } else { /* In this case, rebuild_check should be TRUE. */ - rebuild_check = H5S_select_shape_same_test(sid_reg4,sid_reg_ori4); + rebuild_check = H5S__select_shape_same_test(sid_reg4,sid_reg_ori4); CHECK(rebuild_check,FALSE,"H5S_hyper_rebuild"); } @@ -12237,7 +12245,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = TRUE; - rebuild_stat = H5S_get_rebuild_status_test(sid_irreg4); + rebuild_stat = H5S__get_rebuild_status_test(sid_irreg4); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be FALSE. */ if(rebuild_stat){ @@ -12301,7 +12309,7 @@ test_space_rebuild(void) rebuild_stat = FALSE; - rebuild_stat = H5S_get_rebuild_status_test(sid_reg5); + rebuild_stat = H5S__get_rebuild_status_test(sid_reg5); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be TRUE. */ if(!rebuild_stat){ @@ -12310,7 +12318,7 @@ test_space_rebuild(void) } else { /* In this case, rebuild_check should be TRUE. */ - rebuild_check = H5S_select_shape_same_test(sid_reg5,sid_reg_ori5); + rebuild_check = H5S__select_shape_same_test(sid_reg5,sid_reg_ori5); CHECK(rebuild_check,FALSE,"H5S_hyper_rebuild"); } @@ -12359,7 +12367,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = TRUE; - rebuild_stat = H5S_get_rebuild_status_test(sid_irreg5); + rebuild_stat = H5S__get_rebuild_status_test(sid_irreg5); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be FALSE. */ if(rebuild_stat){ @@ -12400,7 +12408,7 @@ test_space_rebuild(void) ret = H5Sselect_hyperslab(sid_spec,H5S_SELECT_SET,start5,stride5,count5,block5); CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = FALSE; - rebuild_stat = H5S_get_rebuild_status_test(sid_spec); + rebuild_stat = H5S__get_rebuild_status_test(sid_spec); /* In this case, rebuild_stat should be TRUE. */ if(!rebuild_stat){ ret = FAIL; @@ -12422,7 +12430,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = TRUE; - rebuild_stat = H5S_get_rebuild_status_test(sid_spec); + rebuild_stat = H5S__get_rebuild_status_test(sid_spec); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be FALSE. */ if(rebuild_stat){ @@ -12445,7 +12453,7 @@ test_space_rebuild(void) CHECK(ret, FAIL, "H5Sselect_hyperslab"); rebuild_stat = FALSE; - rebuild_stat = H5S_get_rebuild_status_test(sid_spec); + rebuild_stat = H5S__get_rebuild_status_test(sid_spec); assert(rebuild_stat!=FAIL); /* In this case, rebuild_stat should be FALSE. */ if(!rebuild_stat){ @@ -12861,9 +12869,9 @@ test_select_bounds(void) /* Get bounds for 'none' selection */ H5E_BEGIN_TRY { ret = H5Sget_select_bounds(sid, low_bounds, high_bounds); - } H5E_END_TRY; - VERIFY(ret, FAIL, "H5Sget_select_bo unds"); - + } H5E_END_TRY; + VERIFY(ret, FAIL, "H5Sget_select_bo unds"); + /* Set point selection */ coord[0][0] = 3; coord[0][1] = 3; coord[1][0] = 3; coord[1][1] = 96; @@ -13040,14 +13048,14 @@ test_hyper_regular(void) /* Query if 'all' selection is regular hyperslab (should fail) */ H5E_BEGIN_TRY { is_regular = H5Sis_regular_hyperslab(sid); - } H5E_END_TRY; - VERIFY(is_regular, FAIL, "H5Sis_regular_hyperslab"); + } H5E_END_TRY; + VERIFY(is_regular, FAIL, "H5Sis_regular_hyperslab"); /* Query regular hyperslab selection info (should fail) */ H5E_BEGIN_TRY { ret = H5Sget_regular_hyperslab(sid, q_start, q_stride, q_count, q_block); - } H5E_END_TRY; - VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); + } H5E_END_TRY; + VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); /* Set 'none' selection */ ret = H5Sselect_none(sid); @@ -13056,14 +13064,14 @@ test_hyper_regular(void) /* Query if 'none' selection is regular hyperslab (should fail) */ H5E_BEGIN_TRY { is_regular = H5Sis_regular_hyperslab(sid); - } H5E_END_TRY; - VERIFY(is_regular, FAIL, "H5Sis_regular_hyperslab"); + } H5E_END_TRY; + VERIFY(is_regular, FAIL, "H5Sis_regular_hyperslab"); /* Query regular hyperslab selection info (should fail) */ H5E_BEGIN_TRY { ret = H5Sget_regular_hyperslab(sid, q_start, q_stride, q_count, q_block); - } H5E_END_TRY; - VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); + } H5E_END_TRY; + VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); /* Set point selection */ coord[0][0] = 3; coord[0][1] = 3; coord[0][2] = 3; @@ -13076,14 +13084,14 @@ test_hyper_regular(void) /* Query if 'point' selection is regular hyperslab (should fail) */ H5E_BEGIN_TRY { is_regular = H5Sis_regular_hyperslab(sid); - } H5E_END_TRY; - VERIFY(is_regular, FAIL, "H5Sis_regular_hyperslab"); + } H5E_END_TRY; + VERIFY(is_regular, FAIL, "H5Sis_regular_hyperslab"); /* Query regular hyperslab selection info (should fail) */ H5E_BEGIN_TRY { ret = H5Sget_regular_hyperslab(sid, q_start, q_stride, q_count, q_block); - } H5E_END_TRY; - VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); + } H5E_END_TRY; + VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); /* Set "regular" hyperslab selection */ start[0] = 2; start[1] = 2; start[2] = 2; @@ -13095,7 +13103,7 @@ test_hyper_regular(void) /* Query if 'hyperslab' selection is regular hyperslab (should be TRUE) */ is_regular = H5Sis_regular_hyperslab(sid); - VERIFY(is_regular, TRUE, "H5Sis_regular_hyperslab"); + VERIFY(is_regular, TRUE, "H5Sis_regular_hyperslab"); /* Retrieve the hyperslab parameters */ ret = H5Sget_regular_hyperslab(sid, q_start, q_stride, q_count, q_block); @@ -13121,13 +13129,13 @@ test_hyper_regular(void) /* Query if 'hyperslab' selection is regular hyperslab (should be FALSE) */ is_regular = H5Sis_regular_hyperslab(sid); - VERIFY(is_regular, FALSE, "H5Sis_regular_hyperslab"); + VERIFY(is_regular, FALSE, "H5Sis_regular_hyperslab"); /* Query regular hyperslab selection info (should fail) */ H5E_BEGIN_TRY { ret = H5Sget_regular_hyperslab(sid, q_start, q_stride, q_count, q_block); - } H5E_END_TRY; - VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); + } H5E_END_TRY; + VERIFY(ret, FAIL, "H5Sget_regular_hyperslab"); /* 'XOR' in the point again, to remove it, which should make it regular again */ t_start[0] = 0; t_start[1] = 0; t_start[2] = 0; @@ -13137,7 +13145,7 @@ test_hyper_regular(void) /* Query if 'hyperslab' selection is regular hyperslab (should be TRUE) */ is_regular = H5Sis_regular_hyperslab(sid); - VERIFY(is_regular, TRUE, "H5Sis_regular_hyperslab"); + VERIFY(is_regular, TRUE, "H5Sis_regular_hyperslab"); /* Retrieve the hyperslab parameters */ ret = H5Sget_regular_hyperslab(sid, q_start, q_stride, q_count, q_block); |