diff options
Diffstat (limited to 'test')
36 files changed, 9675 insertions, 15 deletions
diff --git a/test/AtomicWriterReader.txt b/test/AtomicWriterReader.txt new file mode 100644 index 0000000..dc0a3bd --- /dev/null +++ b/test/AtomicWriterReader.txt @@ -0,0 +1,48 @@ +Atomic Tests Instructions +========================= + +Purpose: +-------- +This documents how to build and run the Atomic Writer and Reader tests. +The atomic test is to verify if atomic read-write operation on a system works. +The two programs are atomic_writer.c and atomic_reader.c. +atomic_writer.c: is the "write" part of the test; and +atomic_reader.c: is the "read" part of the test. + +Building the Tests +------------------ +The two test parts are automically built during configure and make process. +But to build them individually, you can do in test/ directory: +$ gcc atomic_writer +$ gcc atomic_reader + +Running the Tests +----------------- +$ atomic_writer -n <number of integers to write> -i <number of iterations for writer> +$ atomic_reader -n <number of integers to read> -i <number of iterations for reader> + +Note** +(1) "atomic_data" is the data file used by both the writer/reader in the + current directory. +(2) The value for -n should be the same for both the writer and the reader. +(3) The values for options n and i should be positive integers. +(4) For this version, the user has to provide both options -n and -i to run + the writer and the reader. +(5) If the user wants to run the writer for a long time, just provides a + large number for -i. + +Examples +-------- +$ ./atomic_writer -n 10000 -i 5 + Try to atomic write 10000 integers patterns 10000 time, and iterate the whole + write process 5 times. + +$ ./atomic_reader -n 10000 -i 2 + Try to atomic read 10000 integers patterns 10000 times, and iterate only once. + A summary is posted at the end. If all atomic reads are correct, it will not + show any read beyond "0 re-tries", that is all reads have succeeded in the + first read attempt. + +Remark: +You usually want the writer to iterate more times than the reader so that +the writing will not finish before reading is done. diff --git a/test/CMakeLists.txt b/test/CMakeLists.txt index bd73c84..1e3ab0f 100644 --- a/test/CMakeLists.txt +++ b/test/CMakeLists.txt @@ -20,11 +20,13 @@ set (TEST_LIB_SOURCES ${HDF5_TEST_SOURCE_DIR}/h5test.c ${HDF5_TEST_SOURCE_DIR}/testframe.c ${HDF5_TEST_SOURCE_DIR}/cache_common.c + ${HDF5_TEST_SOURCE_DIR}/swmr_common.c ) set (TEST_LIB_HEADERS ${HDF5_TEST_SOURCE_DIR}/h5test.h ${HDF5_TEST_SOURCE_DIR}/cache_common.h + ${HDF5_TEST_SOURCE_DIR}/swmr_common.h ) add_library (${HDF5_TEST_LIB_TARGET} STATIC ${TEST_LIB_SOURCES} ${TEST_LIB_HEADERS}) @@ -223,6 +225,7 @@ set (H5_TESTS objcopy links unlink + twriteorder big mtime fillval @@ -256,13 +259,32 @@ foreach (test ${H5_TESTS}) endforeach () set (H5_SWMR_TESTS + swmr_addrem_writer swmr_check_compat_vfd + swmr_generator + swmr_reader + swmr_remove_reader + swmr_remove_writer + swmr_sparse_reader + swmr_sparse_writer + swmr_start_write + swmr_writer ) foreach (test ${H5_SWMR_TESTS}) ADD_H5_EXE(${test}) endforeach () +set (H5_VDS_SWMR_TESTS + vds_swmr_gen + vds_swmr_reader + vds_swmr_writer +) + +foreach (test ${H5_VDS_SWMR_TESTS}) + ADD_H5_EXE(${test}) +endforeach (test ${H5_VDS_SWMR_TESTS}) + ############################################################################## ############################################################################## ### A D D I T I O N A L T E S T S ### @@ -326,6 +348,8 @@ set (H5_CHECK_TESTS err_compat tcheck_version testmeta + atomic_writer + atomic_reader links_env flushrefresh ) @@ -378,4 +402,49 @@ else () set_target_properties (plugin PROPERTIES FOLDER test) endif () +############################################################################## +### U S E C A S E S T E S T S +############################################################################## +set (use_append_chunk_SOURCES ${HDF5_TEST_SOURCE_DIR}/use_append_chunk.c ${HDF5_TEST_SOURCE_DIR}/use_common.c) +add_executable (use_append_chunk ${use_append_chunk_SOURCES}) +TARGET_NAMING (use_append_chunk STATIC) +TARGET_C_PROPERTIES (use_append_chunk STATIC " " " ") +target_link_libraries (use_append_chunk ${HDF5_LIB_TARGET} ${HDF5_TEST_LIB_TARGET}) +set_target_properties (use_append_chunk PROPERTIES FOLDER test) +if (BUILD_SHARED_LIBS) + add_executable (use_append_chunk-shared ${use_append_chunk_SOURCES}) + TARGET_NAMING (use_append_chunk-shared SHARED) + TARGET_C_PROPERTIES (use_append_chunk-shared SHARED " " " ") + target_link_libraries (use_append_chunk-shared ${HDF5_TEST_LIBSH_TARGET} ${HDF5_LIBSH_TARGET}) + set_target_properties (use_append_chunk-shared PROPERTIES FOLDER test) +endif () + +set (use_append_mchunks_SOURCES ${HDF5_TEST_SOURCE_DIR}/use_append_mchunks.c ${HDF5_TEST_SOURCE_DIR}/use_common.c) +add_executable (use_append_mchunks ${use_append_mchunks_SOURCES}) +TARGET_NAMING (use_append_mchunks STATIC) +TARGET_C_PROPERTIES (use_append_mchunks STATIC " " " ") +target_link_libraries (use_append_mchunks ${HDF5_LIB_TARGET} ${HDF5_TEST_LIB_TARGET}) +set_target_properties (use_append_mchunks PROPERTIES FOLDER test) +if (BUILD_SHARED_LIBS) + add_executable (use_append_mchunks-shared ${use_append_mchunks_SOURCES}) + TARGET_NAMING (use_append_mchunks-shared SHARED) + TARGET_C_PROPERTIES (use_append_mchunks-shared SHARED " " " ") + target_link_libraries (use_append_mchunks-shared ${HDF5_TEST_LIBSH_TARGET} ${HDF5_LIBSH_TARGET}) + set_target_properties (use_append_mchunks-shared PROPERTIES FOLDER test) +endif () + +set (use_disable_mdc_flushes_SOURCES ${HDF5_TEST_SOURCE_DIR}/use_disable_mdc_flushes.c) +add_executable (use_disable_mdc_flushes ${use_disable_mdc_flushes_SOURCES}) +TARGET_NAMING (use_disable_mdc_flushes STATIC) +TARGET_C_PROPERTIES (use_disable_mdc_flushes STATIC " " " ") +target_link_libraries (use_disable_mdc_flushes ${HDF5_LIB_TARGET} ${HDF5_TEST_LIB_TARGET}) +set_target_properties (use_disable_mdc_flushes PROPERTIES FOLDER test) +if (BUILD_SHARED_LIBS) + add_executable (use_disable_mdc_flushes-shared ${use_disable_mdc_flushes_SOURCES}) + TARGET_NAMING (use_disable_mdc_flushes-shared SHARED) + TARGET_C_PROPERTIES (use_disable_mdc_flushes-shared SHARED " " " ") + target_link_libraries (use_disable_mdc_flushes-shared ${HDF5_TEST_LIBSH_TARGET} ${HDF5_LIBSH_TARGET}) + set_target_properties (use_disable_mdc_flushes-shared PROPERTIES FOLDER test) +endif () + include (CMakeTests.cmake) diff --git a/test/CMakeTests.cmake b/test/CMakeTests.cmake index 20f43bc..495ea2c 100644 --- a/test/CMakeTests.cmake +++ b/test/CMakeTests.cmake @@ -364,6 +364,10 @@ set (test_CLEANFILES layout_extend.h5 zero_chunk.h5 chunk_single.h5 + swmr_non_latest.h5 + earray_hdr_fd.h5 + farray_hdr_fd.h5 + bt2_hdr_fd.h5 storage_size.h5 dls_01_strings.h5 extend.h5 @@ -457,6 +461,7 @@ set (test_CLEANFILES tvltypes.h5 tvlstr.h5 tvlstr2.h5 + twriteorder.dat flush.h5 flush-swmr.h5 noflush.h5 @@ -532,16 +537,24 @@ set (test_CLEANFILES vds_dapl.h5 vds_src_0.h5 vds_src_1.h5 + swmr_data.h5 + use_use_append_chunk.h5 + use_append_mchunks.h5 + use_disable_mdc_flushes.h5 tbogus.h5.copy flushrefresh.h5 flushrefresh_VERIFICATION_START flushrefresh_VERIFICATION_CHECKPOINT1 flushrefresh_VERIFICATION_CHECKPOINT2 flushrefresh_VERIFICATION_DONE + atomic_data accum_swmr_big.h5 ohdr_swmr.h5 + test_swmr*.h5 cache_logging.h5 cache_logging.out + vds_swmr.h5 + vds_swmr_src_*.h5 ) # Remove any output file left over from previous test run @@ -583,6 +596,7 @@ set (H5TEST_TESTS objcopy links unlink + twriteorder big mtime fillval @@ -957,6 +971,9 @@ set_tests_properties (H5PLUGIN-plugin PROPERTIES ### S W M R T E S T S ############################################################################## # testflushrefresh.sh: flushrefresh +# test_usecases.sh: use_append_chunk, use_append_mchunks, use_disable_mdc_flushes +# testswmr.sh: swmr* +# testvdsswmr.sh: vds_swmr* ############################################################################## ############################################################################## @@ -1254,6 +1271,7 @@ if (HDF5_BUILD_GENERATORS) gen_cross gen_deflate gen_filters + gen_idx gen_new_array gen_new_fill gen_new_group diff --git a/test/Makefile.am b/test/Makefile.am index 50b2ee2..fee8cb6 100644 --- a/test/Makefile.am +++ b/test/Makefile.am @@ -29,10 +29,17 @@ AM_CPPFLAGS+=-I$(top_srcdir)/src -I$(top_builddir)/src # testcheck_version.sh: tcheck_version # tetlinks_env.sh: links_env # testflushrefresh.sh: flushrefresh +# test_usecases.sh: use_append_chunk, use_append_mchunks, use_disable_mdc_flushes +# testswmr.sh: swmr* +# testvdsswmr.sh: vds_swmr* TEST_SCRIPT = testerror.sh testlibinfo.sh testcheck_version.sh testlinks_env.sh \ - testflushrefresh.sh + testswmr.sh testvdsswmr.sh testflushrefresh.sh test_usecases.sh SCRIPT_DEPEND = error_test$(EXEEXT) err_compat$(EXEEXT) links_env$(EXEEXT) \ - testflushrefresh.sh + flushrefresh$(EXEEXT) use_append_chunk$(EXEEXT) use_append_mchunks$(EXEEXT) use_disable_mdc_flushes$(EXEEXT) \ + swmr_generator$(EXEEXT) swmr_reader$(EXEEXT) swmr_writer$(EXEEXT) \ + swmr_remove_reader$(EXEEXT) swmr_remove_writer$(EXEEXT) swmr_addrem_writer$(EXEEXT) \ + swmr_sparse_reader$(EXEEXT) swmr_sparse_writer$(EXEEXT) swmr_start_write$(EXEEXT) \ + vds_swmr_gen$(EXEEXT) vds_swmr_reader$(EXEEXT) vds_swmr_writer$(EXEEXT) if HAVE_SHARED_CONDITIONAL TEST_SCRIPT += test_plugin.sh SCRIPT_DEPEND += plugin$(EXEEXT) @@ -48,7 +55,7 @@ TEST_PROG= testhdf5 cache cache_api cache_tagging lheap ohdr stab gheap \ evict_on_close farray earray btree2 fheap \ pool accum hyperslab istore bittests dt_arith \ dtypes dsets cmpd_dset filter_fail extend external efc objcopy links unlink \ - big mtime fillval mount flush1 flush2 app_ref enum \ + twriteorder big mtime fillval mount flush1 flush2 app_ref enum \ set_extent ttsafe enc_dec_plist enc_dec_plist_cross_platform\ getname vfd ntypes dangle dtransform reserved cross_read \ freespace mf vds file_image unregister cache_logging cork swmr @@ -57,15 +64,21 @@ TEST_PROG= testhdf5 cache cache_api cache_tagging lheap ohdr stab gheap \ # error_test and err_compat are built at the same time as the other tests, but executed by testerror.sh. # tcheck_version is used by testcheck_version.sh. # accum_swmr_reader is used by accum.c. +# atomic_writer and atomic_reader are standalone programs. # links_env is used by testlinks_env.sh # flushrefresh is used by testflushrefresh.sh. +# use_append_chunk, use_append_mchunks and use_disable_mdc_flushes are used by test_usecases.sh +# swmr_* files (besides swmr.c) are used by testswmr.sh. +# vds_swmr_* files are used by testvdsswmr.sh # 'make check' doesn't run them directly, so they are not included in TEST_PROG. # Also build testmeta, which is used for timings test. It builds quickly, # and this lets automake keep all its test programs in one place. check_PROGRAMS=$(TEST_PROG) error_test err_compat tcheck_version \ - testmeta accum_swmr_reader \ - links_env flushrefresh \ - swmr_check_compat_vfd + testmeta accum_swmr_reader atomic_writer atomic_reader \ + links_env flushrefresh use_append_chunk use_append_mchunks use_disable_mdc_flushes \ + swmr_generator swmr_start_write swmr_reader swmr_writer swmr_remove_reader \ + swmr_remove_writer swmr_addrem_writer swmr_sparse_reader swmr_sparse_writer \ + swmr_check_compat_vfd vds_swmr_gen vds_swmr_reader vds_swmr_writer if HAVE_SHARED_CONDITIONAL check_PROGRAMS+= plugin endif @@ -77,7 +90,7 @@ endif # --enable-build-all at configure time. # The gen_old_* files can only be compiled with older versions of the library # so do not appear in this list. -BUILD_ALL_PROGS=gen_bad_ohdr gen_bogus gen_cross gen_deflate gen_filters gen_new_array \ +BUILD_ALL_PROGS=gen_bad_ohdr gen_bogus gen_cross gen_deflate gen_filters gen_idx gen_new_array \ gen_new_fill gen_new_group gen_new_mtime gen_new_super gen_noencoder \ gen_nullspace gen_udlinks space_overflow gen_filespace gen_specmetaread \ gen_sizes_lheap gen_file_image gen_plist @@ -106,7 +119,7 @@ else noinst_LTLIBRARIES=libh5test.la endif -libh5test_la_SOURCES=h5test.c testframe.c cache_common.c +libh5test_la_SOURCES=h5test.c testframe.c cache_common.c swmr_common.c # Use libhd5test.la to compile all of the tests LDADD=libh5test.la $(LIBHDF5) @@ -153,7 +166,7 @@ CHECK_CLEANFILES+=accum.h5 cmpd_dset.h5 compact_dataset.h5 dataset.h5 dset_offse stdio.h5 sec2.h5 dtypes[0-9].h5 dtypes1[0].h5 dt_arith[1-2].h5 tattr.h5 \ tselect.h5 mtime.h5 unlink.h5 unicode.h5 coord.h5 \ fillval_[0-9].h5 fillval.raw mount_[0-9].h5 testmeta.h5 ttime.h5 \ - trefer[1-3].h5 tvltypes.h5 tvlstr.h5 tvlstr2.h5 \ + trefer[1-3].h5 tvltypes.h5 tvlstr.h5 tvlstr2.h5 twriteorder.dat \ flush.h5 flush-swmr.h5 noflush.h5 noflush-swmr.h5 flush_extend.h5 \ flush_extend-swmr.h5 noflush_extend.h5 noflush_extend-swmr.h5 \ enum1.h5 titerate.h5 ttsafe.h5 tarray1.h5 tgenprop.h5 \ @@ -170,19 +183,27 @@ CHECK_CLEANFILES+=accum.h5 cmpd_dset.h5 compact_dataset.h5 dataset.h5 dset_offse split_get_file_image_test-m.h5 split_get_file_image_test-r.h5 \ file_image_core_test.h5.copy unregister_filter_1.h5 unregister_filter_2.h5 \ vds_virt.h5 vds_dapl.h5 vds_src_[0-1].h5 \ + swmr_data.h5 use_use_append_chunk.h5 use_append_mchunks.h5 use_disable_mdc_flushes.h5 \ flushrefresh.h5 flushrefresh_VERIFICATION_START \ flushrefresh_VERIFICATION_CHECKPOINT1 flushrefresh_VERIFICATION_CHECKPOINT2 \ - flushrefresh_VERIFICATION_DONE accum_swmr_big.h5 ohdr_swmr.h5 \ - cache_logging.h5 cache_logging.out \ - swmr[0-2].h5 tbogus.h5.copy + flushrefresh_VERIFICATION_DONE atomic_data accum_swmr_big.h5 ohdr_swmr.h5 \ + test_swmr*.h5 cache_logging.h5 cache_logging.out vds_swmr.h5 vds_swmr_src_*.h5 \ + swmr[0-2].h5 swmr_writer.out swmr_writer.log.* swmr_reader.out.* swmr_reader.log.* \ + tbogus.h5.copy + # Sources for testhdf5 executable testhdf5_SOURCES=testhdf5.c tarray.c tattr.c tchecksum.c tconfig.c tfile.c \ tgenprop.c th5o.c th5s.c tcoords.c theap.c tid.c titerate.c tmeta.c tmisc.c \ trefer.c trefstr.c tselect.c tskiplist.c tsohm.c ttime.c ttst.c tunicode.c \ tvlstr.c tvltypes.c +# Sources for Use Cases +use_append_chunk_SOURCES=use_append_chunk.c use_common.c +use_append_mchunks_SOURCES=use_append_mchunks.c use_common.c +use_disable_mdc_flushes_SOURCES=use_disable_mdc_flushes.c + # Temporary files. DISTCLEANFILES=testerror.sh testlibinfo.sh testcheck_version.sh testlinks_env.sh test_plugin.sh \ - testflushrefresh.sh + testswmr.sh testvdsswmr.sh test_usecases.sh testflushrefresh.sh include $(top_srcdir)/config/conclude.am diff --git a/test/POSIX_Order_Write_Test_Report.docx b/test/POSIX_Order_Write_Test_Report.docx Binary files differnew file mode 100644 index 0000000..cf6d1dc --- /dev/null +++ b/test/POSIX_Order_Write_Test_Report.docx diff --git a/test/POSIX_Order_Write_Test_Report.pdf b/test/POSIX_Order_Write_Test_Report.pdf Binary files differnew file mode 100644 index 0000000..0c678c4 --- /dev/null +++ b/test/POSIX_Order_Write_Test_Report.pdf diff --git a/test/SWMR_POSIX_Order_UG.txt b/test/SWMR_POSIX_Order_UG.txt new file mode 100644 index 0000000..2771af1 --- /dev/null +++ b/test/SWMR_POSIX_Order_UG.txt @@ -0,0 +1,94 @@ +POSIX Write Order Test Instructions +=================================== + +Purpose +------- +This documents shows the requirments, implementaion design and instructions +of building and running the POSIX Write Order test. The name of the +test is twriteorder and it resides in the test/ directory. + +Requirements +------------ +The test is to verify that the write order is strictly consistent. +The SWMR feature requires that the order of write is strictly consistent. +"Strict consistency in computer science is the most stringent consistency +model. It says that a read operation has to return the result of the +latest write operation which occurred on that data item."-- +(http://en.wikipedia.org/wiki/Linearizability#Definition_of_linearizability). +This is also an alternative form of what POSIX write require that after a +write operation has returned success, all reads issued afterward should +get the same data the write has written. + +Implementation Design +--------------------- +The test simulates what SWMR does by writing chained blocks and see if +they can be read back correctly. +There is a writer process and a read process. +The file is divided into 2KB partitions. Then writer writes 1 chained +block, each of 1KB big, in each partition after the first partition. +Each chained block has this structure: +Byte 0-3: offset address of its child block. The last child uses 0 as NULL. +Byte 4-1023: some artificial data. +The child block address of Block 1 is NULL (0). +The child block address of Block 2 is the offset address of Block 1. +The child block address of Block n is the offset address of Block n-1. +After all n blocks are written, the offset address of Block n is written +to the offset 0 of the first partition. +Therefore, by the time the offset address of Block n is written to this +position, all n chain-linked blocks have been written. + +The other reader processes will try to read the address value at the +offset 0. The value is initially NULL(0). When it changes to non-zero, +it signifies the writer process has written all the chain-link blocks +and they are ready for the reader processes to access. + +If the system, in which the writer and reader processes run, the readers +will always get all chain-linked blocks correctly. If the order of write +is not maintained, some reader processes may found unexpect block data. + +Building the Tests +------------------ +The name of the test is twriteorder in the test directory. It is added +to the test suite and is built during the "make" process and is run by +the test_usecases.sh test. Users may inspect test/test_usecases.sh.in +to see the examples of testing. + +Running the Tests +----------------- +twriteorder test accepts the following options: +$ ./twriteorder -h +usage: twriteorder [OPTIONS] + OPTIONS + -h Print a usage message and exit + -l w|r launch writer or reader only. [default: launch both] + -b N Block size [default: 1024] + -p N Partition size [default: 2048] + -n N Number of linked blocks [default: 512] + +More Examples +------------- + +# run test with default parameters and launch both writer and reader +#processes. +$ twriteorder + +# run test with blocksize of 1000 bytes (default is 1024 bytes). +$ twriteorder -b 1000 + +# run test with partition size of 3000 bytes (default is 2048 bytes). +$ twriteorder -p 3000 + +# run test with 2000 linked blocks (default is 512 blocks). +$ twriteorder -n 2000 + +# Launch only the writer process. +$ twriteorder -l w + +# Launch only the reader process. +$ twriteorder -l r + +Note that if you want to launch the writer and the reader processes +manually (for example in different machines sharing a common file system), +you need to start the writer process (-l w) first, and then the reader +process (-l r). + diff --git a/test/SWMR_UseCase_UG.txt b/test/SWMR_UseCase_UG.txt new file mode 100644 index 0000000..e29944a --- /dev/null +++ b/test/SWMR_UseCase_UG.txt @@ -0,0 +1,223 @@ +1. Title: + User Guide for SWMR Use Case Programs + +2. Purpose: + This is a User Guide of the SWMR Use Case programs. It descibes the use + case program and explain how to run them. + +2.1. Author and Dates: + Version 2: By Albert Cheng (acheng@hdfgroup.org), 2013/06/18. + Version 1: By Albert Cheng (acheng@hdfgroup.org), 2013/06/01. + + +%%%%Use Case 1.7%%%% + +3. Use Case [1.7]: + Appending a single chunk + +3.1. Program name: + use_append_chunk + +3.2. Description: + Appending a single chunk of raw data to a dataset along an unlimited + dimension within a pre-created file and reading the new data back. + + It first creates one 3d dataset using chunked storage, each chunk + is a (1, chunksize, chunksize) square. The dataset is (unlimited, + chunksize, chunksize). Data type is 2 bytes integer. It starts out + "empty", i.e., first dimension is 0. + + The writer then appends planes, each of (1,chunksize,chunksize) + to the dataset. Fills each plan with plane number and then writes + it at the nth plane. Increases the plane number and repeats till + the end of dataset, when it reaches chunksize long. End product is + a chunksize^3 cube. + + The reader is a separated process, running in parallel with + the writer. It reads planes from the dataset. It expects the + dataset is being changed (growing). It checks the unlimited dimension + (dimension[0]). When it increases, it will read in the new planes, one + by one, and verify the data correctness. (The nth plan should contain + all "n".) When the unlimited dimension grows to the chunksize (it + becomes a cube), that is the expected end of data, the reader exits. + +3.3. How to run the program: + Simplest way is + $ use_append_chunk + + It creates a skeleton dataset (0,256,256) of shorts. Then fork off + a process, which becomes the reader process to read planes from the + dataset, while the original process continues as the writer process + to append planes onto the dataset. + + Other possible options: + + 1. -z option: different chunksize. Default is 256. + $ use_append_chunk -z 1024 + + It uses (1,1024,1024) chunks to produce a 1024^3 cube, about 2GB big. + + + 2. -f filename: different dataset file name + $ use_append_chunk -f /gpfs/tmp/append_data.h5 + + The data file is /gpfs/tmp/append_data.h5. This allows two independent + processes in separated compute nodes to access the datafile on the + shared /gpfs file system. + + + 3. -l option: launch only the reader or writer process. + $ use_append_chunk -f /gpfs/tmp/append_data.h5 -l w # in node X + $ use_append_chunk -f /gpfs/tmp/append_data.h5 -l r # in node Y + + In node X, launch the writer process, which creates the data file + and appends to it. + In node Y, launch the read process to read the data file. + + Note that you need to time the read process to start AFTER the write + process has created the skeleton data file. Otherwise, the reader + will encounter errors such as data file not found. + + 4. -n option: number of planes to write/read. Default is same as the + chunk size as specified by option -z. + $ use_append_chunk -n 1000 # 1000 planes are writtern and read. + + 5. -s option: use SWMR file access mode or not. Default is yes. + $ use_append_chunk -s 0 + + It opens the HDF5 data file without the SWMR access mode (0 means + off). This likely will result in error. This option is provided for + users to see the effect of the neede SWMR access mode for concurrent + access. + +3.4. Test Shell Script: + The Use Case program is installed in the test/ directory and is + compiled as part of the make process. A test script (test_usecases.sh) + is installed in the same directory to test the use case programs. The + test script is rather basic and is more for demonstrating how to + use the program. + + +%%%%Use Case 1.8%%%% + +4. Use Case [1.8]: + Appending a hyperslab of multiple chunks. + +4.1. Program name: + use_append_mchunks + +4.2. Description: + Appending a hyperslab that spans several chunks of a dataset with + unlimited dimensions within a pre-created file and reading the new + data back. + + It first creates one 3d dataset using chunked storage, each chunk is a (1, + chunksize, chunksize) square. The dataset is (unlimited, 2*chunksize, + 2*chunksize). Data type is 2 bytes integer. Therefore, each plane + consists of 4 chunks. It starts out "empty", i.e., first dimension is 0. + + The writer then appends planes, each of (1,2*chunksize,2*chunksize) + to the dataset. Fills each plan with plane number and then writes + it at the nth plane. Increases the plane number and repeats till + the end of dataset, when it reaches chunksize long. End product is + a (2*chunksize)^3 cube. + + The reader is a separated process, running in parallel with + the writer. It reads planes from the dataset. It expects the + dataset is being changed (growing). It checks the unlimited dimension + (dimension[0]). When it increases, it will read in the new planes, one + by one, and verify the data correctness. (The nth plan should contain + all "n".) When the unlimited dimension grows to the 2*chunksize (it + becomes a cube), that is the expected end of data, the reader exits. + +4.3. How to run the program: + Simplest way is + $ use_append_mchunks + + It creates a skeleton dataset (0,512,512) of shorts. Then fork off + a process, which becomes the reader process to read planes from the + dataset, while the original process continues as the writer process + to append planes onto the dataset. + + Other possible options: + + 1. -z option: different chunksize. Default is 256. + $ use_append_mchunks -z 512 + + It uses (1,512,512) chunks to produce a 1024^3 cube, about 2GB big. + + + 2. -f filename: different dataset file name + $ use_append_mchunks -f /gpfs/tmp/append_data.h5 + + The data file is /gpfs/tmp/append_data.h5. This allows two independent + processes in separated compute nodes to access the datafile on the + shared /gpfs file system. + + + 3. -l option: launch only the reader or writer process. + $ use_append_mchunks -f /gpfs/tmp/append_data.h5 -l w # in node X + $ use_append_mchunks -f /gpfs/tmp/append_data.h5 -l r # in node Y + + In node X, launch the writer process, which creates the data file + and appends to it. + In node Y, launch the read process to read the data file. + + Note that you need to time the read process to start AFTER the write + process has created the skeleton data file. Otherwise, the reader + will encounter errors such as data file not found. + + 4. -n option: number of planes to write/read. Default is same as the + chunk size as specified by option -z. + $ use_append_mchunks -n 1000 # 1000 planes are writtern and read. + + 5. -s option: use SWMR file access mode or not. Default is yes. + $ use_append_mchunks -s 0 + + It opens the HDF5 data file without the SWMR access mode (0 means + off). This likely will result in error. This option is provided for + users to see the effect of the neede SWMR access mode for concurrent + access. + +4.4. Test Shell Script: + The Use Case program is installed in the test/ directory and is + compiled as part of the make process. A test script (test_usecases.sh) + is installed in the same directory to test the use case programs. The + test script is rather basic and is more for demonstrating how to + use the program. + + +%%%%Use Case 1.9%%%% + +5. Use Case [1.9]: + Appending n-1 dimensional planes + +5.1. Program names: + use_append_chunk and use_append_mchunks + +5.2. Description: + Appending n-1 dimensional planes or regions to a chunked dataset where + the data does not fill the chunk. + + This means the chunks have multiple planes and when a plane is written, + only one of the planes in each chunk is written. This use case is + achieved by extending the previous use cases 1.7 and 1.8 by defining the + chunks to have more than 1 plane. The -y option is implemented for both + use_append_chunk and use_append_mchunks. + +5.3. How to run the program: + Simplest way is + $ use_append_mchunks -y 5 + + It creates a skeleton dataset (0,512,512), with storage chunks (5,512,512) + of shorts. It then proceeds like use case 1.8 by forking off a reader + process. The original process continues as the writer process that + writes 1 plane at a time, updating parts of the chunks involved. The + reader reads 1 plane at a time, retrieving data from partial chunks. + + The other possible options will work just like the two use cases. + +5.4. Test Shell Script: + Commands are added with -y options to demonstrate how the two use case + programs can be used as for this use case. + diff --git a/test/atomic_reader.c b/test/atomic_reader.c new file mode 100644 index 0000000..94d9c74 --- /dev/null +++ b/test/atomic_reader.c @@ -0,0 +1,363 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ +/*------------------------------------------------------------------------- + * + * Created: atomic_reader.c + * + * Purpose: This is the "reader" part of the standalone test to check + * atomic read-write operation on a system. + * a) atomic_reader.c--the reader (this file) + * a) atomic_writer.c--the writer + * c) atomic_data--the name of the data file used by writer and reader + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include <assert.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#if !defined(WIN32) && !defined(__MINGW32__) + +#include <fcntl.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> + +/****************/ +/* Local Macros */ +/****************/ + +#define FILENAME "atomic_data" +#define READ_TRIES 20 +#define OPEN_TRIES 50 + +/********************/ +/* Local Prototypes */ +/********************/ + +static void usage(void); +int verify(int fd, unsigned int k); +void print_info(int *info, unsigned int lastr, unsigned iteration); + + + +/*------------------------------------------------------------------------- + * Function: usage + * + * Purpose: To print the command line options + * + * Parameters: None + * + * Return: void + * + *------------------------------------------------------------------------- + */ +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("Usage: atomic_reader -n <number of integers to read> -i <number of iterations for reader>\n"); + printf(" Note**The number of integers for option n has to be positive\n"); + printf(" Note**The number of integers for option i has to be positive\n"); + printf("\n"); +} /* usage() */ + + +/*------------------------------------------------------------------------- + * Function: verify + * + * Purpose: To verify that the data read is the pattern expected. + * Each integer read should be the same as the index. + * When a difference is encountered, the remaining integers + * read should be the same as the previous index. + * For example, the pattern expected should be either: + * a) 01234567....n-1 + * or + * b) if at index 4, a difference is encountered, + * the remaining integers should be all "3"s as: + * 012333333333333 + * + * Parameters: + * fd -- the file descriptor + * k -- the number of integers to read + * + * Return: + * positive on success + * negative on failure + * + *------------------------------------------------------------------------- + */ +int +verify(int fd, unsigned int k) +{ + unsigned int i; /* local index variable */ + ssize_t bytes_read; /* the number of bytes read */ + unsigned int *buf = NULL; /* buffer to hold data read */ + + /* Allocate buffer for data read */ + if((buf = (unsigned int *)malloc(k * sizeof(unsigned int))) == NULL) { + printf("READER: error from malloc\n"); + goto error; + } /* end if */ + + /* Position the file at the beginning */ + if(lseek(fd, (off_t)0, SEEK_SET) < 0) { + printf("READER: error from lseek\n"); + goto error; + } /* end if */ + + /* Read the whole file */ + if((bytes_read = read(fd, buf, (k * sizeof(unsigned int)))) < 0) { + printf("READER: error from read\n"); + goto error; + } /* end if */ + + /* Verify the bytes read are correct */ + if(bytes_read != (ssize_t)(k*sizeof(unsigned int))) { + printf("READER: error from bytes read=%lu\n", (unsigned long)bytes_read); + goto error; + } /* end if */ + + /* Verify data read */ + for(i=0; i < k; i++) { + if(buf[i] != i) + break; + } /* end for */ + + if(i < k) { + /* Compare the beginning and ending sentinel values */ + if(buf[k-1] != (i-1)) { + printf("FAIL IN READER: ...beginning sentinel value=%u, i=%u\n", (i-1), i); + printf("FAIL IN READER: buf[%u]=%u\n", i-1, buf[i-1]); + printf("FAIL IN READER: buf[%u]=%u\n", i, buf[i]); + printf("FAIL IN READER: buf[%u]=%u\n", i+1, buf[i+1]); + printf("FAIL IN READER: ...ending sentinel value=%u\n", buf[k-1]); + goto error; + } /* end if */ + } /* end if */ + + /* Free the buffer */ + if(buf) + free(buf); + return 0; + +error: + /* Free the buffer */ + if(buf) + free(buf); + return -1; +} /* end verify() */ + + + +/*------------------------------------------------------------------------- + * Function: print_info + * + * Purpose: To print the statistics gathered for re-reads + * + * Parameters: + * info -- the array storing the statistics for re-reads + * lastr -- the last read completed + * iteration -- the current iteration + * + * Return: void + * + *------------------------------------------------------------------------- + */ +void +print_info(int *info, unsigned int lastr, unsigned iteration) +{ + unsigned j; /* local index variable */ + + printf("--------statistics for %u reads (iteration %u)--------\n", lastr, iteration); + + for(j = 0; j <= READ_TRIES; j++) + printf("# of %u re-tries = %u\n", j, info[j]); + + printf("--------end statistics for %u reads (iteration %u)--------\n", lastr, iteration); +} /* print_info() */ + + +/*------------------------------------------------------------------------- + * Function: main + * + * Purpose: To verify that the data read is the pattern expected. + * (1) Make sure the file opens successfully and the # of bytes read is as expected + * (2) Iterate the reader with i iterations + * (3) Read and verify n integers for each iteration + * (4) On verification error, re-read the data at most READ_TRIES + * times to see if correct data can be obtained + * (5) Print out statistics for the number of re-retries for each iteration + * + * Note: + * (a) The # of integers (via -n option) used by the writer and reader should be the same. + * (b) The data file used by the writer and reader should be the same. + * + * Future enhancement: + * 1) Provide default values for n and i and allow user to run with either 0 or 1 option + * 2) Use HDF library HD<system calls> instead of the system calls + * 3) Handle large sized buffer (gigabytes) if needed + * + * Return: Success: EXIT_SUCCESS + * Failure: EXIT_FAILURE + * + *------------------------------------------------------------------------- + */ +int +main(int argc, char *argv[]) +{ + int fd = -1; /* file descriptor */ + unsigned int j=0, i=0, m=0; /* local index variables */ + int temp; /* temporary variable */ + unsigned int iterations = 0; /* the input for "-i" */ + unsigned num = 0; /* the input for "-n" */ + int opt = 0; /* option char */ + int info[READ_TRIES+1]; /* re-tries statistics */ + + /* Ensure the expected # of arguments */ + if(argc != 5) { + usage(); + exit(EXIT_FAILURE); + } /* end if */ + + /* Parse command line options */ + while((opt = getopt(argc, argv, "n:i:")) != -1) { + switch(opt) { + case 'n': + if((temp = atoi(optarg)) < 0) { + usage(); + exit(EXIT_FAILURE); + } /* end if */ + num = (unsigned int)temp; + break; + case 'i': + if((temp = atoi(optarg)) < 0) { + usage(); + exit(EXIT_FAILURE); + } /* end if */ + iterations = (unsigned int)temp; + break; + default: + printf("Invalid option encountered\n"); + break; + } /* end switch */ + } /* end while */ + + printf("READER: number of integers to read = %u; # of iterations = %d\n", num, iterations); + + printf("\n"); + for(i = 1; i <= iterations; i++) { + unsigned opens = OPEN_TRIES; + + printf("READER: *****start iteration %u*****\n", i); + + /* Ensure open and file size are done properly */ + while(opens--) { + struct stat sinfo; + + memset(&sinfo, 0, sizeof(sinfo)); + + if((fd = open(FILENAME, O_RDONLY, 0644)) < 0) { + printf("READER: error from open--retry open again\n"); + } else { + printf("READER: open succeed\n"); + + if((fstat(fd, &sinfo) == 0) && + (sinfo.st_size == (off_t)(num * sizeof(unsigned int)))) { + printf("READER: file size is correct--%u\n", (unsigned int)sinfo.st_size); + break; + } /* end if */ + + printf("READER: error from fstat or file size of %u is incorrect--retry open again\n", (unsigned int)sinfo.st_size); + if(close(fd) < 0) { + printf("READER: error from close\n"); + return EXIT_FAILURE; + } /* end if */ + fd = -1; + } /* end else */ + + } /* end while */ + + if(fd < 0) { + printf("READER: *****open failure/incorrect file size for all %u tries, continue next iteration*****\n\n", OPEN_TRIES); + continue; + } /* end if */ + + memset(info, 0, sizeof(info)); + + /* Read and verify data */ + for(j = 1; j <= num; j++) { + + printf("READER: doing read %u\n", j); + if(verify(fd, num) < 0) { + printf("READER: error from read %u\n", j); + + /* Perform re-read to see if correct data is obtained */ + for(m = 1; m <= READ_TRIES; m++) { + printf("READER: ===============going to do re-read try %u\n", m); + if(verify(fd, num) < 0) + printf("READER: ===============error from re-read try %u\n", m); + else { + ++info[m]; + printf("READER: ===============SUCCESS from re-read try %u\n", m); + break; + } /* end else */ + } /* end for */ + + if(m > READ_TRIES) { + printf("READER: ===============error from all re-read tries: %u\n", READ_TRIES); + printf("READER:*****ERROR--stop on read %u\n", j); + break; + } /* end if */ + } else { + ++info[0]; + printf("READER: success from read %u\n", j); + } /* end else */ + + } /* end for */ + + /* Print the statistics for re-reads */ + print_info(info, j-1, i); + + /* Close the file */ + if(close(fd) < 0) { + printf("READER: error from close\n"); + return EXIT_FAILURE; + } /* end if */ + + printf("READER: *****end iteration %u*****\n\n", i); + + } /* end for */ + + return EXIT_SUCCESS; +} + +#else /* WIN32 / MINGW32 */ + +int +main(void) +{ + printf("Non-POSIX platform. Exiting.\n"); + return EXIT_FAILURE; +} /* end main() */ + +#endif /* WIN32 / MINGW32 */ + diff --git a/test/atomic_writer.c b/test/atomic_writer.c new file mode 100644 index 0000000..ec1e8c9 --- /dev/null +++ b/test/atomic_writer.c @@ -0,0 +1,245 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: atomic_writer.c + * + * Purpose: This is the "writer" part of the standalone test to check + * atomic read-write operation on a system. + * a) atomic_writer.c--the writer (this file) + * b) atomic_reader.c--the reader + * c) atomic_data--the name of the data file used by writer and reader + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include <assert.h> +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#if !defined(WIN32) && !defined(__MINGW32__) + +#include <fcntl.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/wait.h> + +/****************/ +/* Local Macros */ +/****************/ + +#define FILENAME "atomic_data" + +/********************/ +/* Local Prototypes */ +/********************/ + +static void usage(void); + + +/*------------------------------------------------------------------------- + * Function: usage + * + * Purpose: To print information about the command line options + * + * Parameters: None + * + * Return: void + * + *------------------------------------------------------------------------- + */ +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("Usage: atomic_writer -n <number of integers to write> -i <number of iterations for writer>\n"); + printf(" Note**The number of integers for option n has to be positive\n"); + printf(" Note**The number of integers for option i has to be positive\n"); + printf("\n"); +} /* usage() */ + + + +/*------------------------------------------------------------------------- + * Function: main + * + * Purpose: To write a series of integers to a file for the reader to verify the data. + * A write is atomic if the whole amount written in one operation is not interleaved + * with data from any other process. + * (1) Iterate with i iterations + * (2) Write a series of integers (0 to n-1) to the file with this pattern: + * offset 0: 0000000000000000000000000000000 + * offset 1: 111111111111111111111111111111 + * offset 2: 22222222222222222222222222222 + * offset 3: 3333333333333333333333333333 + * ... + * ... + * offset n-1: (n-1) + * + * At the end of the writes, the data in the file will be: + * 01234567........(n-1) + * + * Note: + * (a) The # of integers (via -n option) used by the writer and reader should be the same. + * (b) The data file used by the writer and reader should be the same. + * + * Future enhancement: + * 1) Provide default values for n and i and allow user to run with either 0 or 1 option + * 2) Use HDF library HD<system calls> instead of the system calls + * 3) Handle large sized buffer (gigabytes) if needed + * + * Return: Success: EXIT_SUCCESS + * Failure: EXIT_FAILURE + * + *------------------------------------------------------------------------- + */ +int +main(int argc, char *argv[]) +{ + int fd = -1; /* file descriptor */ + ssize_t bytes_wrote; /* the nubmer of bytes written */ + unsigned int *buf = NULL; /* buffer to hold written data */ + unsigned int n, u, i; /* local index variable */ + int temp; /* temporary variable */ + unsigned int iterations = 0; /* the input for "-i" */ + unsigned int num = 0; /* the input for "-n" */ + int opt = 0; /* option char */ + + /* Ensure the # of arguments is as expected */ + if(argc != 5) { + usage(); + exit(EXIT_FAILURE); + } /* end if */ + + /* Parse command line options */ + while((opt = getopt(argc, argv, "n:i:")) != -1) { + switch(opt) { + case 'n': + if((temp = atoi(optarg)) < 0) { + usage(); + exit(EXIT_FAILURE); + } /* end if */ + num = (unsigned int)temp; + break; + case 'i': + if((temp = atoi(optarg)) < 0) { + usage(); + exit(EXIT_FAILURE); + } /* end if */ + iterations = (unsigned int)temp; + break; + default: + printf("Invalid option encountered\n"); + break; + } /* end switch */ + } /* end while */ + + printf("WRITER: # of integers to write = %u; # of iterations = %d\n", num, iterations); + + /* Remove existing data file if needed */ + if(remove(FILENAME) < 0) { + if(errno == ENOENT) + printf("WRITER: remove %s--%s\n", FILENAME, strerror(errno)); + else { + printf("WRITER: error from remove: %d--%s\n", errno, strerror(errno)); + goto error; + } /* end else */ + } else + printf("WRITER: %s is removed\n", FILENAME); + + /* Create the data file */ + if((fd = open(FILENAME, O_RDWR|O_TRUNC|O_CREAT, 0664)) < 0) { + printf("WRITER: error from open\n"); + goto error; + } /* end if */ + + /* Allocate buffer for holding data to be written */ + if((buf = (unsigned int *)malloc(num * sizeof(unsigned int))) == NULL) { + printf("WRITER: error from malloc\n"); + if(fd >= 0 && close(fd) < 0) + printf("WRITER: error from close\n"); + goto error; + } /* end if */ + + printf("\n"); + + for(i = 1; i <= iterations; i++) { + printf("WRITER: *****start iteration %u*****\n", i); + + /* Write the series of integers to the file */ + for(n = 0; n < num; n++) { + + /* Set up data to be written */ + for(u=0; u < num; u++) + buf[u] = n; + + /* Position the file to the proper location */ + if(lseek(fd, (off_t)(n*sizeof(unsigned int)), SEEK_SET) < 0) { + printf("WRITER: error from lseek\n"); + goto error; + } /* end if */ + + /* Write the data */ + if((bytes_wrote = write(fd, buf, ((num-n) * sizeof(unsigned int)))) < 0) { + printf("WRITER: error from write\n"); + goto error; + } /* end if */ + + /* Verify the bytes written is correct */ + if(bytes_wrote != (ssize_t)((num-n) * sizeof(unsigned int))) { + printf("WRITER: error from bytes written\n"); + goto error; + } /* end if */ + } /* end for */ + + printf("WRITER: *****end iteration %u*****\n\n", i); + + } /* end for */ + + /* Close the file */ + if(close(fd) < 0) { + printf("WRITER: error from close\n"); + goto error; + } /* end if */ + + /* Free the buffer */ + if(buf) + free(buf); + + return EXIT_SUCCESS; + +error: + return EXIT_FAILURE; +} /* end main() */ + +#else /* WIN32 / MINGW32 */ + +int +main(void) +{ + printf("Non-POSIX platform. Exiting.\n"); + return EXIT_FAILURE; +} /* end main() */ + +#endif /* WIN32 / MINGW32 */ + diff --git a/test/gen_idx.c b/test/gen_idx.c new file mode 100644 index 0000000..8c24198 --- /dev/null +++ b/test/gen_idx.c @@ -0,0 +1,126 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* + * Purpose: This program is run to generate an HDF5 data file with datasets + * that use Fixed Array indexing method. + * + * To test compatibility, compile and run this program + * which will generate a file called "fixed_idx.h5". + * Move it to the test directory in the HDF5 v1.6/1.8 source tree. + * The test: test_idx_compatible() in dsets.c will read it. + */ +#include <assert.h> +#include "hdf5.h" + +const char *FILENAME[1] = { + "fixed_idx.h5" /* file with datasets that use Fixed Array indexing method */ +}; + +#define DSET "dset" +#define DSET_FILTER "dset_filter" + +/* + * Function: gen_idx_file + * + * Purpose: Create a file with datasets that use Fixed Array indexing: + * one dataset: fixed dimension, chunked layout, w/o filters + * one dataset: fixed dimension, chunked layout, w/ filters + * + */ +static void gen_idx_file(void) +{ + hid_t fapl; /* file access property id */ + hid_t fid; /* file id */ + hid_t sid; /* space id */ + hid_t dcpl; /* dataset creation property id */ + hid_t did, did2; /* dataset id */ + hsize_t dims[1] = {10}; /* dataset dimension */ + hsize_t c_dims[1] = {2}; /* chunk dimension */ + herr_t status; /* return status */ + int i; /* local index variable */ + int buf[10]; /* data buffer */ + + + /* Get a copy of the file aaccess property */ + fapl = H5Pcreate(H5P_FILE_ACCESS); + assert(fapl >= 0); + + /* Set the "use the latest format" bounds for creating objects in the file */ + status = H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST); + assert(status >= 0); + + /* Create dataset */ + fid = H5Fcreate(FILENAME[0], H5F_ACC_TRUNC, H5P_DEFAULT, fapl); + assert(fid >= 0); + + /* Create data */ + for(i = 0; i < 10; i++) + buf[i] = i; + + /* Set chunk */ + dcpl = H5Pcreate(H5P_DATASET_CREATE); + assert(dcpl >= 0); + status = H5Pset_chunk(dcpl, 1, c_dims); + assert(status >= 0); + + sid = H5Screate_simple(1, dims, NULL); + assert(sid >= 0); + + /* Create a 1D dataset */ + did = H5Dcreate2(fid, DSET, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); + assert(did >= 0); + + /* Write to the dataset */ + status = H5Dwrite(did, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf); + assert(status >= 0); + +#if defined (H5_HAVE_FILTER_DEFLATE) + /* set deflate data */ + status = H5Pset_deflate(dcpl, 9); + assert(status >= 0); + + /* Create and write the dataset */ + did2 = H5Dcreate2(fid, DSET_FILTER, H5T_NATIVE_INT, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); + assert(did2 >= 0); + + status = H5Dwrite(did2, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf); + assert(status >= 0); + + /* Close the dataset */ + status = H5Dclose(did2); + assert(status >= 0); +#endif + + /* closing */ + status = H5Dclose(did); + assert(status >= 0); + status = H5Sclose(sid); + assert(status >= 0); + status = H5Pclose(dcpl); + assert(status >= 0); + status = H5Pclose(fapl); + assert(status >= 0); + status = H5Fclose(fid); + assert(status >= 0); +} /* gen_idx_file() */ + +int main(void) +{ + gen_idx_file(); + + return 0; +} + diff --git a/test/swmr_addrem_writer.c b/test/swmr_addrem_writer.c new file mode 100644 index 0000000..d3b5829 --- /dev/null +++ b/test/swmr_addrem_writer.c @@ -0,0 +1,443 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_addrem_writer.c + * + * Purpose: Adds and removes data to a randomly selected subset of the + * datasets in the SWMR test file. + * + * This program is intended to run concurrently with the + * swmr_reader program. It is also run AFTER a sequential + * (not concurrent!) invoking of swmr_writer so the writer + * can dump a bunch of data into the datasets. Otherwise, + * there wouldn't be much to shrink :) + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/****************/ +/* Local Macros */ +/****************/ + +/* The maximum # of records to add/remove from the dataset in one step */ +#define MAX_SIZE_CHANGE 10 + +/********************/ +/* Local Prototypes */ +/********************/ + +static hid_t open_skeleton(const char *filename, unsigned verbose); +static int addrem_records(hid_t fid, unsigned verbose, unsigned long nops, + unsigned long flush_count); +static void usage(void); + + +/*------------------------------------------------------------------------- + * Function: open_skeleton + * + * Purpose: Opens the SWMR HDF5 file and datasets. + * + * Parameters: const char *filename + * The filename of the SWMR HDF5 file to open + * + * unsigned verbose + * Whether or not to emit verbose console messages + * + * Return: Success: The file ID of the opened SWMR file + * The dataset IDs are stored in a global array + * + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static hid_t +open_skeleton(const char *filename, unsigned verbose) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t fapl; /* File access property list */ + hid_t sid; /* Dataspace ID */ + hsize_t dim[2]; /* Dataspace dimension */ + unsigned u, v; /* Local index variable */ + + HDassert(filename); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + /* Set to use the latest library format */ + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + +#ifdef QAK + /* Increase the initial size of the metadata cache */ + { + H5AC_cache_config_t mdc_config; + + mdc_config.version = H5AC__CURR_CACHE_CONFIG_VERSION; + H5Pget_mdc_config(fapl, &mdc_config); + HDfprintf(stderr, "mdc_config.initial_size = %lu\n", (unsigned long)mdc_config.initial_size); + HDfprintf(stderr, "mdc_config.epoch_length = %lu\n", (unsigned long)mdc_config.epoch_length); + mdc_config.set_initial_size = 1; + mdc_config.initial_size = 16 * 1024 * 1024; + /* mdc_config.epoch_length = 5000; */ + H5Pset_mdc_config(fapl, &mdc_config); + } +#endif /* QAK */ + +#ifdef QAK + H5Pset_fapl_log(fapl, "append.log", H5FD_LOG_ALL, (size_t)(512 * 1024 * 1024)); +#endif /* QAK */ + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDWR | H5F_ACC_SWMR_WRITE, fapl)) < 0) + return -1; + + /* Close file access property list */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Opening datasets\n"); + + /* Open the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + if((symbol_info[u][v].dsid = H5Dopen2(fid, symbol_info[u][v].name, H5P_DEFAULT)) < 0) + return -1; + if((sid = H5Dget_space(symbol_info[u][v].dsid)) < 0) + return -1; + if(2 != H5Sget_simple_extent_ndims(sid)) + return -1; + if(H5Sget_simple_extent_dims(sid, dim, NULL) < 0) + return -1; + symbol_info[u][v].nrecords = dim[1]; + } /* end for */ + + return fid; +} + + +/*------------------------------------------------------------------------- + * Function: addrem_records + * + * Purpose: Adds/removes a specified number of records to random datasets + * to the SWMR test file. + * + * Parameters: hid_t fid + * The file ID of the SWMR HDF5 file + * + * unsigned verbose + * Whether or not to emit verbose console messages + * + * unsigned long nops + * # of records to read/write in the datasets + * + * unsigned long flush_count + * # of records to write before flushing the file to disk + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +addrem_records(hid_t fid, unsigned verbose, unsigned long nops, unsigned long flush_count) +{ + hid_t tid; /* Datatype ID for records */ + hid_t mem_sid; /* Memory dataspace ID */ + hsize_t start[2] = {0, 0}, count[2] = {1, 1}; /* Hyperslab selection values */ + hsize_t dim[2] = {1, 0}; /* Dataspace dimensions */ + symbol_t buf[MAX_SIZE_CHANGE]; /* Write buffer */ + unsigned long op_to_flush; /* # of operations before flush */ + unsigned long u, v; /* Local index variables */ + + HDassert(fid > 0); + + /* Reset the buffer */ + HDmemset(&buf, 0, sizeof(buf)); + + /* Create a dataspace for the record to add */ + if((mem_sid = H5Screate_simple(2, count, NULL)) < 0) + return -1; + + /* Create datatype for appending records */ + if((tid = create_symbol_datatype()) < 0) + return -1; + + /* Add and remove records to random datasets, according to frequency + * distribution */ + op_to_flush = flush_count; + for(u=0; u<nops; u++) { + symbol_info_t *symbol; /* Symbol to write record to */ + hid_t file_sid; /* Dataset's space ID */ + + /* Get a random dataset, according to the symbol distribution */ + symbol = choose_dataset(); + + /* Decide whether to shrink or expand, and by how much */ + count[1] = (hsize_t)HDrandom() % (MAX_SIZE_CHANGE * 2) + 1; + + if(count[1] > MAX_SIZE_CHANGE) { + /* Add records */ + count[1] -= MAX_SIZE_CHANGE; + + /* Set the buffer's IDs (equal to its position) */ + for(v=0; v<count[1]; v++) + buf[v].rec_id = (uint64_t)symbol->nrecords + (uint64_t)v; + + /* Set the memory space to the correct size */ + if(H5Sset_extent_simple(mem_sid, 2, count, NULL) < 0) + return -1; + + /* Get the coordinates to write */ + start[1] = symbol->nrecords; + + /* Cork the metadata cache, to prevent the object header from being + * flushed before the data has been written */ + if(H5Odisable_mdc_flushes(symbol->dsid) < 0) + return -1; + + /* Extend the dataset's dataspace to hold the new record */ + symbol->nrecords+= count[1]; + dim[1] = symbol->nrecords; + if(H5Dset_extent(symbol->dsid, dim) < 0) + return -1; + + /* Get the dataset's dataspace */ + if((file_sid = H5Dget_space(symbol->dsid)) < 0) + return -1; + + /* Choose the last record in the dataset */ + if(H5Sselect_hyperslab(file_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0) + return -1; + + /* Write record to the dataset */ + if(H5Dwrite(symbol->dsid, tid, mem_sid, file_sid, H5P_DEFAULT, &buf) < 0) + return -1; + + /* Uncork the metadata cache */ + if(H5Oenable_mdc_flushes(symbol->dsid) < 0) + return -1; + + /* Close the dataset's dataspace */ + if(H5Sclose(file_sid) < 0) + return -1; + } /* end if */ + else { + /* Shrink the dataset's dataspace */ + if(count[1] > symbol->nrecords) + symbol->nrecords = 0; + else + symbol->nrecords -= count[1]; + dim[1] = symbol->nrecords; + if(H5Dset_extent(symbol->dsid, dim) < 0) + return -1; + } /* end else */ + + /* Check for flushing file */ + if(flush_count > 0) { + /* Decrement count of records to write before flushing */ + op_to_flush--; + + /* Check for counter being reached */ + if(0 == op_to_flush) { + /* Flush contents of file */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + return -1; + + /* Reset flush counter */ + op_to_flush = flush_count; + } /* end if */ + } /* end if */ + } /* end for */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing datasets\n"); + + /* Close the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) + if(H5Dclose(symbol_info[u][v].dsid) < 0) + return -1; + + return 0; +} + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_addrem_writer [-q] [-f <# of operations between flushing\n"); + printf(" file contents>] [-r <random seed>] <# of operations>\n"); + printf("\n"); + printf("<# of operations between flushing file contents> should be 0 (for\n"); + printf("no flushing) or between 1 and (<# of operations> - 1).\n"); + printf("\n"); + printf("<# of operations> must be specified.\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given), flushing every 1000 operations\n"); + printf("('-f 1000'), and will generate a random seed (no -r given).\n"); + printf("\n"); + HDexit(1); +} + +int main(int argc, const char *argv[]) +{ + hid_t fid; /* File ID for file opened */ + long nops = 0; /* # of times to grow or shrink the dataset */ + long flush_count = 1000; /* # of records to write between flushing file */ + unsigned verbose = 1; /* Whether to emit some informational messages */ + unsigned use_seed = 0; /* Set to 1 if a seed was set on the command line */ + unsigned random_seed = 0; /* Random # seed */ + unsigned u; /* Local index variable */ + int temp; + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* # of records to write between flushing file */ + case 'f': + flush_count = HDatol(argv[u + 1]); + if(flush_count < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = 0; + u++; + break; + + /* Random # seed */ + case 'r': + use_seed = 1; + temp = HDatoi(argv[u + 1]); + if(temp < 0) + usage(); + else + random_seed = (unsigned)temp; + u += 2; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to append */ + nops = HDatol(argv[u]); + if(nops <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + if(nops <= 0) + usage(); + if(flush_count >= nops) + usage(); + + /* Emit informational message */ + if(verbose) { + HDfprintf(stderr, "Parameters:\n"); + HDfprintf(stderr, "\t# of operations between flushes = %ld\n", flush_count); + HDfprintf(stderr, "\t# of operations = %ld\n", nops); + } /* end if */ + + /* Set the random seed */ + if(0 == use_seed) { + struct timeval t; + HDgettimeofday(&t, NULL); + random_seed = (unsigned)(t.tv_usec); + } /* end if */ + HDsrandom(random_seed); + /* ALWAYS emit the random seed for possible debugging */ + HDfprintf(stderr, "Using writer random seed: %u\n", random_seed); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Opening skeleton file: %s\n", FILENAME); + + /* Open file skeleton */ + if((fid = open_skeleton(FILENAME, verbose)) < 0) { + HDfprintf(stderr, "Error opening skeleton file!\n"); + HDexit(1); + } /* end if */ + + /* Send a message to indicate "H5Fopen" is complete--releasing the file lock */ + h5_send_message(WRITER_MESSAGE, NULL, NULL); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Adding and removing records\n"); + + /* Grow and shrink datasets */ + if(addrem_records(fid, verbose, (unsigned long)nops, (unsigned long)flush_count) < 0) { + HDfprintf(stderr, "Error adding and removing records from datasets!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing objects\n"); + + /* Close objects opened */ + if(H5Fclose(fid) < 0) { + HDfprintf(stderr, "Error closing file!\n"); + HDexit(1); + } /* end if */ + + return 0; +} diff --git a/test/swmr_check_compat_vfd.c b/test/swmr_check_compat_vfd.c index d1134ee..6876ef5 100644 --- a/test/swmr_check_compat_vfd.c +++ b/test/swmr_check_compat_vfd.c @@ -18,12 +18,13 @@ * * It is intended for use in shell scripts. */ + #include "h5test.h" /* This file needs to access the file driver testing code */ -#define H5FD_FRIEND /*suppress error about including H5FDpkg */ +#define H5FD_FRIEND /*suppress error about including H5FDpkg */ #define H5FD_TESTING -#include "H5FDpkg.h" /* File drivers */ +#include "H5FDpkg.h" /* File drivers */ /*------------------------------------------------------------------------- diff --git a/test/swmr_common.c b/test/swmr_common.c new file mode 100644 index 0000000..ac17ddd --- /dev/null +++ b/test/swmr_common.c @@ -0,0 +1,290 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_common.c + * + * Purpose: Utility functions for the SWMR test code. + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/*******************/ +/* Local Variables */ +/*******************/ + +/* The SWMR data arrays: + * + * The code uses a 2-D jagged array of datasets. The first dimension is called + * the 'level' and there are five of them. + * + * #define NLEVELS 5 + * + * The second dimension is the 'count' and there are quite a few datasets per + * 'level'. + * + * unsigned symbol_count[NLEVELS] = {100, 200, 400, 800, 1600}; + * + * These datasets are created when the skeleton is generated and are initially + * empty. Each dataset has no upper bound on size (H5S_UNLIMITED). They + * are of compound type, with two members: an integer ID and an opaque + * 'data part'. The data part is not used by the SWMR testing. + * + * The SWMR testing will then randomly add and/or remove entries + * from these datasets. The selection of the level is skewed by a mapping + * table which preferentially hammers on the lower levels with their smaller + * number of datasets. + * + * static unsigned symbol_mapping[NMAPPING] = {0, 0, 0, 0, 1, 1, 2, 3, 4}; + * + * The information about each dataset (name, hid_t, etc.) is stored in a + * separate array. + * + * symbol_info_t *symbol_info[NLEVELS]; + */ + +/* An array of dataset levels, used to select the level for a SWMR operation + * Note that this preferentially selects the lower levels with their smaller + * number of datasets. + */ +static unsigned symbol_mapping[NMAPPING] = {0, 0, 0, 0, 1, 1, 2, 3, 4}; + +/* The number of datasets at each level */ +unsigned symbol_count[NLEVELS] = {100, 200, 400, 800, 1600}; + +/* Array of dataset information entries (1 per dataset) */ +symbol_info_t *symbol_info[NLEVELS]; + + +/*------------------------------------------------------------------------- + * Function: choose_dataset + * + * Purpose: Selects a random dataset in the SWMR file + * + * Parameters: N/A + * + * Return: Success: A pointer to information about a dataset. + * Failure: Can't fail + * + *------------------------------------------------------------------------- + */ +symbol_info_t * +choose_dataset(void) +{ + unsigned level; /* The level of the dataset */ + unsigned offset; /* The "offset" of the dataset at that level */ + + /* Determine level of dataset */ + level = symbol_mapping[HDrandom() % NMAPPING]; + + /* Determine the offset of the level */ + offset = (unsigned)(HDrandom() % (int)symbol_count[level]); + + return &symbol_info[level][offset]; +} /* end choose_dataset() */ + + +/*------------------------------------------------------------------------- + * Function: create_symbol_datatype + * + * Purpose: Create's the HDF5 datatype used for elements in the SWMR + * testing datasets. + * + * Parameters: N/A + * + * Return: Success: An HDF5 type ID + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +hid_t +create_symbol_datatype(void) +{ + hid_t sym_type_id; /* Datatype ID for symbol */ + hid_t opaq_type_id; /* Datatype ID for opaque part of record */ + + /* Create opaque datatype to represent other information for this record */ + if((opaq_type_id = H5Tcreate(H5T_OPAQUE, (size_t)DTYPE_SIZE)) < 0) + return -1; + + /* Create compound datatype for symbol */ + if((sym_type_id = H5Tcreate(H5T_COMPOUND, sizeof(symbol_t))) < 0) + return -1; + + /* Insert fields in symbol datatype */ + if(H5Tinsert(sym_type_id, "rec_id", HOFFSET(symbol_t, rec_id), H5T_NATIVE_UINT64) < 0) + return -1; + if(H5Tinsert(sym_type_id, "info", HOFFSET(symbol_t, info), opaq_type_id) < 0) + return -1; + + /* Close opaque datatype */ + if(H5Tclose(opaq_type_id) < 0) + return -1; + + return sym_type_id; +} /* end create_symbol_datatype() */ + + +/*------------------------------------------------------------------------- + * Function: generate_name + * + * Purpose: Generates a SWMR testing dataset name given a level and + * count. + * The name is in the format <name>-<level> (%u-%04u). + * + * Parameters: char *name_buf + * Buffer for the created name. Must be pre-allocated. + * Since the name is formulaic, this isn't considered an issue. + * + * unsigned level + * The dataset's level + * + * unsigned count + * The dataset's count + * + * Return: Success: 0 + * + * Failure: Can't fail + * + *------------------------------------------------------------------------- + */ +int +generate_name(char *name_buf, unsigned level, unsigned count) +{ + HDassert(name_buf); + + sprintf(name_buf, "%u-%04u", level, count); + + return 0; +} /* end generate_name() */ + + +/*------------------------------------------------------------------------- + * Function: generate_symbols + * + * Purpose: Initializes the global dataset infomration arrays. + * + * Parameters: N/A + * + * Return: Success: 0 + * Failure: Can't fail + * + *------------------------------------------------------------------------- + */ +int +generate_symbols(void) +{ + unsigned u, v; /* Local index variables */ + + for(u = 0; u < NLEVELS; u++) { + symbol_info[u] = (symbol_info_t *)HDmalloc(symbol_count[u] * sizeof(symbol_info_t)); + for(v = 0; v < symbol_count[u]; v++) { + char name_buf[64]; + + generate_name(name_buf, u, v); + symbol_info[u][v].name = (char *)HDmalloc(HDstrlen(name_buf) + 1); + HDstrcpy(symbol_info[u][v].name, name_buf); + symbol_info[u][v].dsid = -1; + symbol_info[u][v].nrecords = 0; + } /* end for */ + } /* end for */ + + return 0; +} /* end generate_symbols() */ + + +/*------------------------------------------------------------------------- + * Function: shutdown_symbols + * + * Purpose: Cleans up the global dataset information arrays. + * + * Parameters: N/A + * + * Return: Success: 0 + * Failure: Can't fail + * + *------------------------------------------------------------------------- + */ +int +shutdown_symbols(void) +{ + unsigned u, v; /* Local index variables */ + + /* Clean up the symbols */ + for(u = 0; u < NLEVELS; u++) { + for(v = 0; v < symbol_count[u]; v++) + HDfree(symbol_info[u][v].name); + HDfree(symbol_info[u]); + } /* end for */ + + return 0; +} /* end shutdown_symbols() */ + + +/*------------------------------------------------------------------------- + * Function: print_metadata_retries_info + * + * Purpose: To retrieve and print the collection of metadata retries for the file. + * + * Parameters: fid: the currently opened file identifier + * + * Return: Success: 0 + * Failure: negative + * + *------------------------------------------------------------------------- + */ +int +print_metadata_retries_info(hid_t fid) +{ + H5F_retry_info_t info; + unsigned i; + + /* Retrieve the collection of retries */ + if(H5Fget_metadata_read_retry_info(fid, &info) < 0) + return (-1); + + /* Print information for each non-NULL retries[i] */ + for(i = 0; i < H5F_NUM_METADATA_READ_RETRY_TYPES; i++) { + unsigned power; + unsigned j; + + if(NULL == info.retries[i]) + continue; + + HDfprintf(stderr, "Metadata read retries for item %u:\n", i); + power = 1; + for(j = 0; j < info.nbins; j++) { + if(info.retries[i][j]) + HDfprintf(stderr, "\t# of retries for %u - %u retries: %u\n", + power, (power * 10) - 1, info.retries[i][j]); + power *= 10; + } /* end for */ + } /* end for */ + + /* Free memory for each non-NULL retries[i] */ + for(i = 0; i < H5F_NUM_METADATA_READ_RETRY_TYPES; i++) + if(info.retries[i] != NULL) + H5free_memory(info.retries[i]); + + return 0; +} /* print_metadata_retries_info() */ diff --git a/test/swmr_common.h b/test/swmr_common.h new file mode 100644 index 0000000..a2cee71 --- /dev/null +++ b/test/swmr_common.h @@ -0,0 +1,80 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +#ifndef _SWMR_COMMON_H +#define _SWMR_COMMON_H + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" + +/**********/ +/* Macros */ +/**********/ + +#define NLEVELS 5 /* # of datasets in the SWMR test file */ + +#define NMAPPING 9 + +#define FILENAME "swmr_data.h5" /* SWMR test file name */ +#define DTYPE_SIZE 150 /* Data size in opaque type */ + +/* The message sent by writer that the file open is done--releasing the file lock */ +#define WRITER_MESSAGE "SWMR_WRITER_MESSAGE" + +/************/ +/* Typedefs */ +/************/ + +/* Information about a symbol/dataset */ +typedef struct { + char *name; /* Dataset name for symbol */ + hid_t dsid; /* Dataset ID for symbol */ + hsize_t nrecords; /* Number of records for the symbol */ +} symbol_info_t; + +/* A symbol's record */ +typedef struct { + uint64_t rec_id; /* ID for this record (unique in symbol) */ + uint8_t info[DTYPE_SIZE]; /* "Other" information for this record */ +} symbol_t; + +/********************/ +/* Global Variables */ +/********************/ +H5TEST_DLLVAR symbol_info_t *symbol_info[NLEVELS]; +H5TEST_DLLVAR unsigned symbol_count[NLEVELS]; + +/**************/ +/* Prototypes */ +/**************/ +#ifdef __cplusplus +extern "C" { +#endif + +H5TEST_DLL symbol_info_t * choose_dataset(void); +H5TEST_DLL hid_t create_symbol_datatype(void); +H5TEST_DLL int generate_name(char *name_buf, unsigned level, unsigned count); +H5TEST_DLL int generate_symbols(void); +H5TEST_DLL int shutdown_symbols(void); +H5TEST_DLL int print_metadata_retries_info(hid_t fid); + +#ifdef __cplusplus +} +#endif + +#endif /* _SWMR_COMMON_H */ diff --git a/test/swmr_generator.c b/test/swmr_generator.c new file mode 100644 index 0000000..a87879f --- /dev/null +++ b/test/swmr_generator.c @@ -0,0 +1,386 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_generator.c + * + * Purpose: Functions for building and setting up the SWMR test file + * and datasets. + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/* + * This file needs to access testing codefrom the H5O package. + */ +#define H5O_FRIEND /*suppress error about including H5Opkg */ +#define H5O_TESTING +#include "H5Opkg.h" /* Object headers */ + + +/****************/ +/* Local Macros */ +/****************/ + +#define CHUNK_SIZE 50 /* Chunk size for created datasets */ + +/********************/ +/* Local Prototypes */ +/********************/ + +static int gen_skeleton(const char *filename, hbool_t verbose, + hbool_t swmr_write, int comp_level, const char *index_type, + unsigned random_seed); +static void usage(void); + + +/*------------------------------------------------------------------------- + * Function: gen_skeleton + * + * Purpose: Creates the HDF5 file and datasets which will be used in + * the SWMR testing. + * + * Parameters: const char *filename + * The SWMR test file's name. + * + * hbool_t verbose + * Whether verbose console output is desired. + * + * hbool_t swmr_write + * Whether to create the file with SWMR writing enabled + * + * int comp_level + * The zlib compression level to use. -1 = no compression. + * + * const char *index_type + * The chunk index type (b1 | b2 | ea | fa) + * + * unsigned random_seed + * The random seed to store in the file. The sparse tests use + * this value. + * + * Return: Success: 0 + * Failure: Can't fail + * + *------------------------------------------------------------------------- + */ +static int +gen_skeleton(const char *filename, hbool_t verbose, hbool_t swmr_write, + int comp_level, const char *index_type, unsigned random_seed) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t fcpl; /* File creation property list */ + hid_t fapl; /* File access property list */ + hid_t dcpl; /* Dataset creation property list */ + hid_t tid; /* Datatype for dataset elements */ + hid_t sid; /* Dataspace ID */ + hid_t aid; /* Attribute ID */ + hsize_t dims[2] = {1, 0}; /* Dataset starting dimensions */ + hsize_t max_dims[2] = {1, H5S_UNLIMITED}; /* Dataset maximum dimensions */ + hsize_t chunk_dims[2] = {1, CHUNK_SIZE}; /* Chunk dimensions */ +#ifdef FILLVAL_WORKS + symbol_t fillval; /* Dataset fill value */ +#endif /* FILLVAL_WORKS */ + unsigned u, v; /* Local index variable */ + + HDassert(filename); + HDassert(index_type); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + /* Can create a file for SWMR support with: (a) (write+latest-format) or (b) (SWMR write+non-latest-format) */ + if(!swmr_write) { + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + } + + /* There are two chunk indexes tested here. + * With one unlimited dimension, we get the extensible array index + * type, with two unlimited dimensions, we get a v2 B-tree. + */ + if(!HDstrcmp(index_type, "b2")) + max_dims[0] = H5S_UNLIMITED; + +#ifdef QAK + /* Increase the initial size of the metadata cache */ + { + H5AC_cache_config_t mdc_config; + + mdc_config.version = H5AC__CURR_CACHE_CONFIG_VERSION; + H5Pget_mdc_config(fapl, &mdc_config); + HDfprintf(stderr, "mdc_config.initial_size = %lu\n", (unsigned long)mdc_config.initial_size); + HDfprintf(stderr, "mdc_config.epoch_length = %lu\n", (unsigned long)mdc_config.epoch_length); + mdc_config.set_initial_size = 1; + mdc_config.initial_size = 16 * 1024 * 1024; + /* mdc_config.epoch_length = 5000; */ + H5Pset_mdc_config(fapl, &mdc_config); + } +#endif /* QAK */ + +#ifdef QAK + H5Pset_small_data_block_size(fapl, (hsize_t)(50 * CHUNK_SIZE * DTYPE_SIZE)); +#endif /* QAK */ + +#ifdef QAK + H5Pset_fapl_log(fapl, "append.log", H5FD_LOG_ALL, (size_t)(512 * 1024 * 1024)); +#endif /* QAK */ + + /* Create file creation property list */ + if((fcpl = H5Pcreate(H5P_FILE_CREATE)) < 0) + return -1; + +#ifdef QAK + H5Pset_link_phase_change(fcpl, 0, 0); +#endif /* QAK */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Creating file\n"); + + /* Create the file */ + if((fid = H5Fcreate(filename, H5F_ACC_TRUNC | (swmr_write ? H5F_ACC_SWMR_WRITE : 0), fcpl, fapl)) < 0) + return -1; + + /* Close file creation property list */ + if(H5Pclose(fcpl) < 0) + return -1; + + /* Close file access property list */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Create attribute with (shared) random number seed - for sparse test */ + if((sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + if((aid = H5Acreate2(fid, "seed", H5T_NATIVE_UINT, sid, H5P_DEFAULT, H5P_DEFAULT)) < 0) + return -1; + if(H5Awrite(aid, H5T_NATIVE_UINT, &random_seed) < 0) + return -1; + if(H5Sclose(sid) < 0) + return -1; + + /* Create datatype for creating datasets */ + if((tid = create_symbol_datatype()) < 0) + return -1; + + /* Create dataspace for creating datasets */ + if((sid = H5Screate_simple(2, dims, max_dims)) < 0) + return -1; + + /* Create dataset creation property list */ + if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) + return -1; + if(H5Pset_chunk(dcpl, 2, chunk_dims) < 0) + return -1; + if(comp_level >= 0) { + if(H5Pset_deflate(dcpl, (unsigned)comp_level) < 0) + return -1; + } /* end if */ +#ifdef FILLVAL_WORKS + /* Currently fill values do not work because they can bump the dataspace + * message to the second object header chunk. We should enable the fillval + * here when this is fixed. -NAF 8/11/11 */ + HDmemset(&fillval, 0, sizeof(fillval)); + fillval.rec_id = (uint64_t)ULLONG_MAX; + if(H5Pset_fill_value(dcpl, tid, &fillval) < 0) + return -1; +#endif /* FILLVAL_WORKS */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Creating datasets\n"); + + /* Create the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + hid_t dsid; /* Dataset ID */ + char name_buf[64]; + hbool_t move_dataspace_message = FALSE; /* Whether to move the dataspace message out of object header chunk #0 */ + + generate_name(name_buf, u, v); + if((dsid = H5Dcreate2(fid, name_buf, tid, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) + return -1; + + /* Determine if the dataspace message for this dataset should be + * moved out of chunk #0 of the object header + * (Set to TRUE for every fourth dataset) + */ + move_dataspace_message = !(HDrandom() % 4); + if(move_dataspace_message) { + unsigned chunk_num; /* Object header chunk # for dataspace message */ + + /* Move the dataspace message to a new object header chunk */ + if(H5O_msg_move_to_new_chunk_test(dsid, H5O_SDSPACE_ID) < 0) + return -1; + + /* Retrieve the chunk # for the dataspace message */ + chunk_num = UINT_MAX; + if(H5O_msg_get_chunkno_test(dsid, H5O_SDSPACE_ID, &chunk_num) < 0) + return -1; + /* Should not be in chunk #0 for now */ + if(0 == chunk_num) + return -1; + } /* end if */ + + if(H5Dclose(dsid) < 0) + return -1; + } /* end for */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing objects\n"); + + /* Close everythign */ + if(H5Pclose(dcpl) < 0) + return -1; + if(H5Sclose(sid) < 0) + return -1; + if(H5Tclose(tid) < 0) + return -1; + if(H5Fclose(fid) < 0) + return -1; + + return 0; +} /* end gen_skeleton() */ + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_generator [-q] [-s] [-c <deflate compression level>]\n"); + printf(" [-i <index type>] [-r <random seed>]\n"); + printf("\n"); + printf("NOTE: The random seed option is only used by the sparse test. Other\n"); + printf(" tests specify the random seed as a reader/writer option.\n"); + printf("\n"); + printf("<deflate compression level> should be -1 (for no compression) or 0-9\n"); + printf("\n"); + printf("<index type> should be b2 or ea\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given), no SWMR_WRITE mode (no '-s' given) no\n"); + printf("compression ('-c -1'), v1 b-tree indexing (-i b1), and will generate a random\n"); + printf("seed (no -r given).\n"); + printf("\n"); + HDexit(1); +} /* end usage() */ + +int main(int argc, const char *argv[]) +{ + int comp_level = -1; /* Compression level (-1 is no compression) */ + hbool_t verbose = TRUE; /* Whether to emit some informational messages */ + hbool_t swmr_write = FALSE; /* Whether to create file with SWMR_WRITE access */ + const char *index_type = "b1"; /* Chunk index type */ + hbool_t use_seed = FALSE; /* Set to TRUE if a seed was set on the command line */ + unsigned random_seed = 0; /* Random # seed */ + unsigned u; /* Local index variables */ + int temp; + + /* Parse command line options */ + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* Compress dataset chunks */ + case 'c': + comp_level = HDatoi(argv[u + 1]); + if(comp_level < -1 || comp_level > 9) + usage(); + u += 2; + break; + + /* Chunk index type */ + case 'i': + index_type = argv[u + 1]; + if(HDstrcmp(index_type, "ea") + && HDstrcmp(index_type, "b2")) + usage(); + u += 2; + break; + + /* Random # seed */ + case 'r': + use_seed = TRUE; + temp = HDatoi(argv[u + 1]); + if(temp < 0) + usage(); + else + random_seed = (unsigned)temp; + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = FALSE; + u++; + break; + + /* Run with SWMR_WRITE */ + case 's': + swmr_write = TRUE; + u++; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + } /* end while */ + } /* end if */ + + /* Emit informational message */ + if(verbose) { + HDfprintf(stderr, "Parameters:\n"); + HDfprintf(stderr, "\tswmr writes %s\n", swmr_write ? "on" : "off"); + HDfprintf(stderr, "\tcompression level = %d\n", comp_level); + HDfprintf(stderr, "\tindex type = %s\n", index_type); + } /* end if */ + + /* Set the random seed */ + if(!use_seed) { + struct timeval t; + + HDgettimeofday(&t, NULL); + random_seed = (unsigned)(t.tv_usec); + } /* end if */ + HDsrandom(random_seed); + /* ALWAYS emit the random seed for possible debugging */ + HDfprintf(stderr, "Using generator random seed (used in sparse test only): %u\n", random_seed); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Generating skeleton file: %s\n", FILENAME); + + /* Generate file skeleton */ + if(gen_skeleton(FILENAME, verbose, swmr_write, comp_level, index_type, random_seed) < 0) { + HDfprintf(stderr, "Error generating skeleton file!\n"); + HDexit(1); + } /* end if */ + + return 0; +} diff --git a/test/swmr_reader.c b/test/swmr_reader.c new file mode 100644 index 0000000..af4a450 --- /dev/null +++ b/test/swmr_reader.c @@ -0,0 +1,549 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_reader.c + * + * Purpose: Reads data from a randomly selected subset of the datasets + * in the SWMR test file. + * + * This program is intended to run concurrently with the + * swmr_writer program. + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/********************/ +/* Local Prototypes */ +/********************/ + +static int check_dataset(hid_t fid, hbool_t verbose, FILE *verbose_file, + const char *sym_name, symbol_t *record, hid_t rec_sid); +static int read_records(const char *filename, hbool_t verbose, FILE *verbose_file, + unsigned random_seed, unsigned long nseconds, unsigned poll_time, + unsigned ncommon, unsigned nrandom); + +/*******************/ +/* Local Variables */ +/*******************/ + +static hid_t symbol_tid = -1; /* The type ID for the SWMR datasets */ + + +/*------------------------------------------------------------------------- + * Function: check_dataset + * + * Purpose: For a given dataset, checks to make sure that the stated + * and actual sizes are the same. If they are not, then + * we have an inconsistent dataset due to a SWMR error. + * + * Parameters: hid_t fid + * The SWMR test file's ID. + * + * hbool_t verbose + * Whether verbose console output is desired. + * + * FILE *verbose_file + * File handle for verbose output + * + * const char *sym_name + * The name of the dataset from which to read. + * + * symbol_t *record + * Memory for the record. Must be pre-allocated. + * + * hid_t rec_sid + * The memory dataspace for access. It's always the same so + * there is no need to re-create it every time this function + * is called. + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +check_dataset(hid_t fid, hbool_t verbose, FILE *verbose_file, + const char *sym_name, symbol_t *record, hid_t rec_sid) +{ + hid_t dsid; /* Dataset ID */ + hid_t file_sid; /* Dataset's space ID */ + hssize_t snpoints; /* Number of elements in dataset */ + hsize_t start[2] = {0, 0}, count[2] = {1, 1}; /* Hyperslab selection values */ + + HDassert(fid >= 0); + HDassert(sym_name); + HDassert(record); + HDassert(rec_sid >= 0); + + /* Open dataset for symbol */ + if((dsid = H5Dopen2(fid, sym_name, H5P_DEFAULT)) < 0) + return -1; + + /* Get the dataset's dataspace */ + if((file_sid = H5Dget_space(dsid)) < 0) + return -1; + + /* Get the number of elements (= records, for 1-D datasets) */ + if((snpoints = H5Sget_simple_extent_npoints(file_sid)) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Symbol = '%s', # of records = %lld\n", sym_name, (long long)snpoints); + + /* Check if there are records for symbol */ + if(snpoints > 0) { + /* Choose the last record in the dataset */ + start[1] = (hsize_t)(snpoints - 1); + if(H5Sselect_hyperslab(file_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0) + return -1; + + /* Read record from dataset */ + record->rec_id = (uint64_t)ULLONG_MAX; + if(H5Dread(dsid, symbol_tid, rec_sid, file_sid, H5P_DEFAULT, record) < 0) + return -1; + + /* Verify record value */ + if(record->rec_id != start[1]) { + struct timeval tv; + + HDgettimeofday(&tv, NULL); + + if(verbose) { + HDfprintf(verbose_file, "*** ERROR ***\n"); + HDfprintf(verbose_file, "Incorrect record value!\n"); + HDfprintf(verbose_file, "Time = %llu.%llu, Symbol = '%s', # of records = %lld, record->rec_id = %llu\n", (unsigned long long)tv.tv_sec, (unsigned long long)tv.tv_usec, sym_name, (long long)snpoints, (unsigned long long)record->rec_id); + } /* end if */ + return -1; + } /* end if */ + } /* end if */ + + /* Close the dataset's dataspace */ + if(H5Sclose(file_sid) < 0) + return -1; + + /* Close dataset for symbol */ + if(H5Dclose(dsid) < 0) + return -1; + + return 0; +} /* end check_dataset() */ + + +/*------------------------------------------------------------------------- + * Function: read_records + * + * Purpose: For a given dataset, checks to make sure that the stated + * and actual sizes are the same. If they are not, then + * we have an inconsistent dataset due to a SWMR error. + * + * The "common" datasets are a random selection from among + * the level 0 datasets. The "random" datasets are a random + * selection from among all the file's datasets. This scheme + * ensures that the level 0 datasets are interrogated vigorously. + * + * Parameters: const char *filename + * The SWMR test file's name. + * + * hbool_t verbose + * Whether verbose console output is desired. + * + * FILE *verbose_file + * File handle for verbose output + * + * unsigned random_seed + * Random seed for the file (used for verbose logging) + * + * unsigned long nseconds + * The amount of time to read records (ns). + * + * unsigned poll_time + * The amount of time to sleep (s). + * + * unsigned ncommon + * The number of common/non-random datasets that will be opened. + * + * unsigned nrandom + * The number of random datasets that will be opened. + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +read_records(const char *filename, hbool_t verbose, FILE *verbose_file, + unsigned random_seed, unsigned long nseconds, unsigned poll_time, + unsigned ncommon, unsigned nrandom) +{ + time_t start_time; /* Starting time */ + time_t curr_time; /* Current time */ + symbol_info_t **sym_com = NULL; /* Pointers to array of common dataset IDs */ + symbol_info_t **sym_rand = NULL; /* Pointers to array of random dataset IDs */ + hid_t mem_sid; /* Memory dataspace ID */ + hid_t fid; /* SWMR test file ID */ + hid_t fapl; /* file access property list */ + symbol_t record; /* The record to read from the dataset */ + unsigned read_attempts; /* The number of read attempts for metadata */ + unsigned v; /* Local index variable */ + + HDassert(filename); + HDassert(nseconds != 0); + HDassert(poll_time != 0); + + /* Reset the record */ + /* (record's 'info' field might need to change for each record read, also) */ + HDmemset(&record, 0, sizeof(record)); + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Choosing datasets\n"); + + /* Allocate space for 'common' datasets, if any */ + if(ncommon > 0) { + /* Allocate array to hold pointers to symbols for common datasets */ + if(NULL == (sym_com = (symbol_info_t **)HDmalloc(sizeof(symbol_info_t *) * ncommon))) + return -1; + + /* Open the common datasets */ + for(v = 0; v < ncommon; v++) { + unsigned offset; /* Offset of symbol to use */ + + /* Determine the offset of the symbol, within level 0 symbols */ + /* (level 0 symbols are the most common symbols) */ + offset = (unsigned)((unsigned)HDrandom() % symbol_count[0]); + sym_com[v] = &symbol_info[0][offset]; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Common symbol #%u = '%s'\n", v, symbol_info[0][offset].name); + } /* end for */ + } /* end if */ + + /* Allocate space for 'random' datasets, if any */ + if(nrandom > 0) { + /* Allocate array to hold pointers to symbols for random datasets */ + if(NULL == (sym_rand = (symbol_info_t **)HDmalloc(sizeof(symbol_info_t *) * nrandom))) + return -1; + + /* Determine the random datasets */ + for(v = 0; v < nrandom; v++) { + symbol_info_t *sym; /* Symbol to use */ + + /* Determine the symbol, within all symbols */ + if(NULL == (sym = choose_dataset())) + return -1; + sym_rand[v] = sym; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Random symbol #%u = '%s'\n", v, sym->name); + } /* end for */ + } /* end if */ + + /* Create a dataspace for the record to read */ + if((mem_sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Reading records\n"); + + /* Get the starting time */ + start_time = HDtime(NULL); + curr_time = start_time; + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + /* Log I/O when verbose output it enbabled */ + if(verbose) { + char verbose_name[1024]; + + HDsnprintf(verbose_name, sizeof(verbose_name), "swmr_reader.log.%u", random_seed); + + H5Pset_fapl_log(fapl, verbose_name, H5FD_LOG_ALL, (size_t)(512 * 1024 * 1024)); + } /* end if */ + + + /* Loop over reading records until [at least] the correct # of seconds have passed */ + while(curr_time < (time_t)(start_time + (time_t)nseconds)) { + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Opening file: %s\n", filename); + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDONLY | H5F_ACC_SWMR_READ, fapl)) < 0) + return -1; + + /* Check 'common' datasets, if any */ + if(ncommon > 0) { + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Checking common symbols\n"); + + /* Iterate over common datasets */ + for(v = 0; v < ncommon; v++) { + /* Check common dataset */ + if(check_dataset(fid, verbose, verbose_file, sym_com[v]->name, &record, mem_sid) < 0) + return -1; + HDmemset(&record, 0, sizeof(record)); + } /* end for */ + } /* end if */ + + /* Check 'random' datasets, if any */ + if(nrandom > 0) { + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Checking random symbols\n"); + + /* Iterate over random datasets */ + for(v = 0; v < nrandom; v++) { + /* Check random dataset */ + if(check_dataset(fid, verbose, verbose_file, sym_rand[v]->name, &record, mem_sid) < 0) + return -1; + HDmemset(&record, 0, sizeof(record)); + } /* end for */ + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Closing file\n"); + + /* Close the file */ + if(H5Fclose(fid) < 0) + return -1; + + /* Sleep for the appropriate # of seconds */ + HDsleep(poll_time); + + /* Retrieve the current time */ + curr_time = HDtime(NULL); + } /* end while */ + + /* Close the memory dataspace */ + if(H5Sclose(mem_sid) < 0) + return -1; + + /* Close the fapl */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Closing datasets\n"); + + /* Close 'random' datasets, if any */ + if(nrandom > 0) { + /* Release array holding dataset ID's for random datasets */ + HDfree(sym_rand); + } /* end if */ + + /* Close 'common' datasets, if any */ + if(ncommon > 0) { + /* Release array holding dataset ID's for common datasets */ + HDfree(sym_com); + } /* end if */ + + return 0; +} /* end read_records() */ + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_reader [-q] [-s <# of seconds to sleep between polling>]\n"); + printf(" [-h <# of common symbols to poll>] [-l <# of random symbols to poll>]\n"); + printf(" [-r <random seed>] <# of seconds to test>\n"); + printf("\n"); + printf("<# of seconds to test> must be specified.\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given), 1 second between polling ('-s 1'),\n"); + printf("5 common symbols to poll ('-h 5'), 10 random symbols to poll ('-l 10'),\n"); + printf("and will generate a random seed (no -r given).\n"); + printf("\n"); + HDexit(1); +} + +int main(int argc, const char *argv[]) +{ + long nseconds = 0; /* # of seconds to test */ + int poll_time = 1; /* # of seconds between polling */ + int ncommon = 5; /* # of common symbols to poll */ + int nrandom = 10; /* # of random symbols to poll */ + hbool_t verbose = TRUE; /* Whether to emit some informational messages */ + FILE *verbose_file = NULL; /* File handle for verbose output */ + hbool_t use_seed = FALSE; /* Set to 1 if a seed was set on the command line */ + unsigned random_seed = 0; /* Random # seed */ + unsigned u; /* Local index variables */ + int temp; + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* # of common symbols to poll */ + case 'h': + ncommon = HDatoi(argv[u + 1]); + if(ncommon < 0) + usage(); + u += 2; + break; + + /* # of random symbols to poll */ + case 'l': + nrandom = HDatoi(argv[u + 1]); + if(nrandom < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = FALSE; + u++; + break; + + /* Random # seed */ + case 'r': + use_seed = TRUE; + temp = HDatoi(argv[u + 1]); + if(temp < 0) + usage(); + else + random_seed = (unsigned)temp; + u += 2; + break; + + /* # of seconds between polling */ + case 's': + poll_time = HDatoi(argv[u + 1]); + if(poll_time < 0) + usage(); + u += 2; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to append */ + nseconds = HDatol(argv[u]); + if(nseconds <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + if(nseconds <= 0) + usage(); + if(poll_time >= nseconds) + usage(); + + /* Set the random seed */ + if(!use_seed) { + struct timeval t; + + HDgettimeofday(&t, NULL); + random_seed = (unsigned)(t.tv_usec); + } /* end if */ + HDsrandom(random_seed); + + /* Open output file */ + if(verbose) { + char verbose_name[1024]; + + HDsnprintf(verbose_name, sizeof(verbose_name), "swmr_reader.out.%u", random_seed); + if(NULL == (verbose_file = HDfopen(verbose_name, "w"))) { + HDfprintf(stderr, "Can't open verbose output file!\n"); + HDexit(1); + } + } /* end if */ + + /* Emit informational message */ + if(verbose) { + HDfprintf(verbose_file, "Parameters:\n"); + HDfprintf(verbose_file, "\t# of seconds between polling = %d\n", poll_time); + HDfprintf(verbose_file, "\t# of common symbols to poll = %d\n", ncommon); + HDfprintf(verbose_file, "\t# of random symbols to poll = %d\n", nrandom); + HDfprintf(verbose_file, "\t# of seconds to test = %ld\n", nseconds); + } /* end if */ + + /* ALWAYS emit the random seed for possible debugging */ + HDfprintf(stdout, "Using reader random seed: %u\n", random_seed); + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) { + HDfprintf(stderr, "Error generating symbol names!\n"); + HDexit(1); + } /* end if */ + + /* Create datatype for creating datasets */ + if((symbol_tid = create_symbol_datatype()) < 0) + return -1; + + /* Reading records from datasets */ + if(read_records(FILENAME, verbose, verbose_file, random_seed, (unsigned long)nseconds, (unsigned)poll_time, (unsigned)ncommon, (unsigned)nrandom) < 0) { + HDfprintf(stderr, "Error reading records from datasets (random_seed = %u)!\n", random_seed); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Closing objects\n"); + + /* Close objects created */ + if(H5Tclose(symbol_tid) < 0) { + HDfprintf(stderr, "Error closing symbol datatype!\n"); + HDexit(1); + } /* end if */ + + return 0; +} + diff --git a/test/swmr_remove_reader.c b/test/swmr_remove_reader.c new file mode 100644 index 0000000..689b010 --- /dev/null +++ b/test/swmr_remove_reader.c @@ -0,0 +1,519 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_remove_reader.c + * + * Purpose: Reads data from a randomly selected subset of the datasets + * in the SWMR test file. Unlike the regular reader, these + * datasets will be shrinking. + * + * This program is intended to run concurrently with the + * swmr_remove_writer program. + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/*******************/ +/* Local Variables */ +/*******************/ + +static hid_t symbol_tid = -1; + +/********************/ +/* Local Prototypes */ +/********************/ + +static int check_dataset(hid_t fid, unsigned verbose, const char *sym_name, + symbol_t *record, hid_t rec_sid); +static int read_records(const char *filename, unsigned verbose, unsigned long nseconds, + unsigned poll_time, unsigned ncommon, unsigned nrandom); +static void usage(void); + + +/*------------------------------------------------------------------------- + * Function: check_dataset + * + * Purpose: For a given dataset, checks to make sure that the stated + * and actual sizes are the same. If they are not, then + * we have an inconsistent dataset due to a SWMR error. + * + * Parameters: hid_t fid + * The SWMR test file's ID. + * + * unsigned verbose + * Whether verbose console output is desired. + * + * const char *sym_name + * The name of the dataset from which to read. + * + * symbol_t *record + * Memory for the record. Must be pre-allocated. + * + * hid_t rec_sid + * The memory dataspace for access. It's always the same so + * there is no need to re-create it every time this function + * is called. + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +check_dataset(hid_t fid, unsigned verbose, const char *sym_name, symbol_t *record, + hid_t rec_sid) +{ + hid_t dsid; /* Dataset ID */ + hid_t file_sid; /* Dataset's space ID */ + hssize_t snpoints; /* Number of elements in dataset */ + hsize_t start[2] = {0, 0}, count[2] = {1, 1}; /* Hyperslab selection values */ + + HDassert(fid >= 0); + HDassert(sym_name); + HDassert(record); + HDassert(rec_sid >= 0); + + /* Open dataset for symbol */ + if((dsid = H5Dopen2(fid, sym_name, H5P_DEFAULT)) < 0) + return -1; + + /* Get the dataset's dataspace */ + if((file_sid = H5Dget_space(dsid)) < 0) + return -1; + + /* Get the number of elements (= records, for 1-D datasets) */ + if((snpoints = H5Sget_simple_extent_npoints(file_sid)) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Symbol = '%s', # of records = %lld\n", sym_name, (long long)snpoints); + + /* Check if there are records for symbol */ + if(snpoints > 0) { + /* Choose a random record in the dataset, choosing the last record half + * the time */ + start[1] = (hsize_t)(HDrandom() % (snpoints * 2)); + if(start[1] > (hsize_t)(snpoints - 1)) + start[1] = (hsize_t)(snpoints - 1); + if(H5Sselect_hyperslab(file_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0) + return -1; + + /* Read record from dataset */ +#ifdef FILLVAL_WORKS + /* When shrinking the dataset, we cannot guarantee that the buffer will + * even be touched, unless there is a fill value. Since fill values do + * not work with SWMR currently (see note in swmr_generator.c), we + * simply initialize rec_id to 0. */ + record->rec_id = (uint64_t)ULLONG_MAX - 1; +#else /* FILLVAL_WORKS */ + record->rec_id = (uint64_t)0; +#endif /* FILLVAL_WORKS */ + if(H5Dread(dsid, symbol_tid, rec_sid, file_sid, H5P_DEFAULT, record) < 0) + return -1; + + /* Verify record value - note that it may be the fill value, because the + * chunk may be deleted before the object header has the updated + * dimensions */ + if(record->rec_id != start[1] && record->rec_id != (uint64_t)0) { + HDfprintf(stderr, "*** ERROR ***\n"); + HDfprintf(stderr, "Incorrect record value!\n"); + HDfprintf(stderr, "Symbol = '%s', # of records = %lld, record->rec_id = %llx\n", sym_name, (long long)snpoints, (unsigned long long)record->rec_id); + return -1; + } /* end if */ + } /* end if */ + + /* Close the dataset's dataspace */ + if(H5Sclose(file_sid) < 0) + return -1; + + /* Close dataset for symbol */ + if(H5Dclose(dsid) < 0) + return -1; + + return 0; +} /* end check_dataset() */ + + +/*------------------------------------------------------------------------- + * Function: read_records + * + * Purpose: For a given dataset, checks to make sure that the stated + * and actual sizes are the same. If they are not, then + * we have an inconsistent dataset due to a SWMR error. + * + * The "common" datasets are a random selection from among + * the level 0 datasets. The "random" datasets are a random + * selection from among all the file's datasets. This scheme + * ensures that the level 0 datasets are interrogated vigorously. + * + * Parameters: const char *filename + * The SWMR test file's name. + * + * unsigned verbose + * Whether verbose console output is desired. + * + * unsigned long nseconds + * The amount of time to read records (ns). + * + * unsigned poll_time + * The amount of time to sleep (s). + * + * unsigned ncommon + * The number of common/non-random datasets that will be opened. + * + * unsigned nrandom + * The number of random datasets that will be opened. + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +read_records(const char *filename, unsigned verbose, unsigned long nseconds, + unsigned poll_time, unsigned ncommon, unsigned nrandom) +{ + time_t start_time; /* Starting time */ + time_t curr_time; /* Current time */ + symbol_info_t **sym_com = NULL; /* Pointers to array of common dataset IDs */ + symbol_info_t **sym_rand = NULL; /* Pointers to array of random dataset IDs */ + hid_t mem_sid; /* Memory dataspace ID */ + hid_t fid; /* SWMR test file ID */ + hid_t fapl; /* File access property list */ + symbol_t record; /* The record to add to the dataset */ + unsigned v; /* Local index variable */ + + HDassert(filename); + HDassert(nseconds != 0); + HDassert(poll_time != 0); + + /* Reset the record */ + /* (record's 'info' field might need to change for each record written, also) */ + HDmemset(&record, 0, sizeof(record)); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Choosing datasets\n"); + + /* Allocate space for 'common' datasets, if any */ + if(ncommon > 0) { + /* Allocate array to hold pointers to symbols for common datasets */ + if(NULL == (sym_com = (symbol_info_t **)HDmalloc(sizeof(symbol_info_t *) * ncommon))) + return -1; + + /* Open the common datasets */ + for(v = 0; v < ncommon; v++) { + unsigned offset; /* Offset of symbol to use */ + + /* Determine the offset of the symbol, within level 0 symbols */ + /* (level 0 symbols are the most common symbols) */ + offset = (unsigned)(HDrandom() % symbol_count[0]); + sym_com[v] = &symbol_info[0][offset]; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Common symbol #%u = '%s'\n", v, symbol_info[0][offset].name); + } /* end for */ + } /* end if */ + + /* Allocate space for 'random' datasets, if any */ + if(nrandom > 0) { + /* Allocate array to hold pointers to symbols for random datasets */ + if(NULL == (sym_rand = (symbol_info_t **)HDmalloc(sizeof(symbol_info_t *) * nrandom))) + return -1; + + /* Determine the random datasets */ + for(v = 0; v < nrandom; v++) { + symbol_info_t *sym; /* Symbol to use */ + + /* Determine the symbol, within all symbols */ + if(NULL == (sym = choose_dataset())) + return -1; + sym_rand[v] = sym; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Random symbol #%u = '%s'\n", v, sym->name); + } /* end for */ + } /* end if */ + + /* Create a dataspace for the record to read */ + if((mem_sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Reading records\n"); + + /* Get the starting time */ + start_time = HDtime(NULL); + curr_time = start_time; + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + /* Loop over reading records until [at least] the correct # of seconds have passed */ + while(curr_time < (time_t)(start_time + (time_t)nseconds)) { + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Opening file: %s\n", filename); + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDONLY | H5F_ACC_SWMR_READ, fapl)) < 0) + return -1; + + /* Check 'common' datasets, if any */ + if(ncommon > 0) { + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Checking common symbols\n"); + + /* Iterate over common datasets */ + for(v = 0; v < ncommon; v++) { + /* Check common dataset */ + if(check_dataset(fid, verbose, sym_com[v]->name, &record, mem_sid) < 0) + return -1; + HDmemset(&record, 0, sizeof(record)); + } /* end for */ + } /* end if */ + + /* Check 'random' datasets, if any */ + if(nrandom > 0) { + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Checking random symbols\n"); + + /* Iterate over random datasets */ + for(v = 0; v < nrandom; v++) { + /* Check random dataset */ + if(check_dataset(fid, verbose, sym_rand[v]->name, &record, mem_sid) < 0) + return -1; + HDmemset(&record, 0, sizeof(record)); + } /* end for */ + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing file\n"); + + /* Close the file */ + if(H5Fclose(fid) < 0) + return -1; + + /* Sleep for the appropriate # of seconds */ + HDsleep(poll_time); + + /* Retrieve the current time */ + curr_time = HDtime(NULL); + } /* end while */ + + /* Close the fapl */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Close the memory dataspace */ + if(H5Sclose(mem_sid) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing datasets\n"); + + /* Close 'random' datasets, if any */ + if(nrandom > 0) { + /* Release array holding dataset ID's for random datasets */ + HDfree(sym_rand); + } /* end if */ + + /* Close 'common' datasets, if any */ + if(ncommon > 0) { + /* Release array holding dataset ID's for common datasets */ + HDfree(sym_com); + } /* end if */ + + return 0; +} /* end read_records() */ + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_remove_reader [-q] [-s <# of seconds to sleep between\n"); + printf(" polling>] [-h <# of common symbols to poll>] [-l <# of random symbols\n"); + printf(" to poll>] [-r <random seed>] <# of seconds to test>\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given), 1 second between polling ('-s 1'),\n"); + printf("5 common symbols to poll ('-h 5'), 10 random symbols to poll ('-l 10'),\n"); + printf("and will generate a random seed (no -r given).\n"); + printf("\n"); + HDexit(1); +} + +int main(int argc, const char *argv[]) +{ + long nseconds = 0; /* # of seconds to test */ + int poll_time = 1; /* # of seconds between polling */ + int ncommon = 5; /* # of common symbols to poll */ + int nrandom = 10; /* # of random symbols to poll */ + unsigned verbose = 1; /* Whether to emit some informational messages */ + unsigned use_seed = 0; /* Set to 1 if a seed was set on the command line */ + unsigned random_seed = 0; /* Random # seed */ + unsigned u; /* Local index variables */ + int temp; + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* # of common symbols to poll */ + case 'h': + ncommon = HDatoi(argv[u + 1]); + if(ncommon < 0) + usage(); + u += 2; + break; + + /* # of random symbols to poll */ + case 'l': + nrandom = HDatoi(argv[u + 1]); + if(nrandom < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = 0; + u++; + break; + + /* Random # seed */ + case 'r': + use_seed = 1; + temp = HDatoi(argv[u + 1]); + if(temp < 0) + usage(); + else + random_seed = (unsigned)temp; + u += 2; + break; + + /* # of seconds between polling */ + case 's': + poll_time = HDatoi(argv[u + 1]); + if(poll_time < 0) + usage(); + u += 2; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to append */ + nseconds = HDatol(argv[u]); + if(nseconds <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + if(nseconds <= 0) + usage(); + if(poll_time >= nseconds) + usage(); + + /* Emit informational message */ + if(verbose) { + HDfprintf(stderr, "Parameters:\n"); + HDfprintf(stderr, "\t# of seconds between polling = %d\n", poll_time); + HDfprintf(stderr, "\t# of common symbols to poll = %d\n", ncommon); + HDfprintf(stderr, "\t# of random symbols to poll = %d\n", nrandom); + HDfprintf(stderr, "\t# of seconds to test = %ld\n", nseconds); + } /* end if */ + + /* Set the random seed */ + if(0 == use_seed) { + struct timeval t; + HDgettimeofday(&t, NULL); + random_seed = (unsigned)(t.tv_usec); + } /* end if */ + HDsrandom(random_seed); + /* ALWAYS emit the random seed for possible debugging */ + HDfprintf(stderr, "Using reader random seed: %u\n", random_seed); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) { + HDfprintf(stderr, "Error generating symbol names!\n"); + HDexit(1); + } /* end if */ + + /* Create datatype for creating datasets */ + if((symbol_tid = create_symbol_datatype()) < 0) + return -1; + + /* Reading records from datasets */ + if(read_records(FILENAME, verbose, (unsigned long)nseconds, (unsigned)poll_time, (unsigned)ncommon, (unsigned)nrandom) < 0) { + HDfprintf(stderr, "Error reading records from datasets!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing objects\n"); + + /* Close objects created */ + if(H5Tclose(symbol_tid) < 0) { + HDfprintf(stderr, "Error closing symbol datatype!\n"); + HDexit(1); + } /* end if */ + + return 0; +} diff --git a/test/swmr_remove_writer.c b/test/swmr_remove_writer.c new file mode 100644 index 0000000..ddf7ede --- /dev/null +++ b/test/swmr_remove_writer.c @@ -0,0 +1,381 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_remove_writer.c + * + * Purpose: Removes data from a randomly selected subset of the datasets + * in the SWMR test file. + * + * This program is intended to run concurrently with the + * swmr_remove_reader program. It is also run AFTER a sequential + * (not concurrent!) invoking of swmr_writer so the writer + * can dump a bunch of data into the datasets. Otherwise, + * there wouldn't be much to shrink :) + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/****************/ +/* Local Macros */ +/****************/ + +/* The maximum number of records to remove in one step */ +#define MAX_REMOVE_SIZE 10 + +/********************/ +/* Local Prototypes */ +/********************/ + +static hid_t open_skeleton(const char *filename, unsigned verbose, unsigned old); +static int remove_records(hid_t fid, unsigned verbose, unsigned long nshrinks, + unsigned long flush_count); +static void usage(void); + + +/*------------------------------------------------------------------------- + * Function: open_skeleton + * + * Purpose: Opens the SWMR HDF5 file and datasets. + * + * Parameters: const char *filename + * The filename of the SWMR HDF5 file to open + * + * unsigned verbose + * Whether or not to emit verbose console messages + * + * Return: Success: The file ID of the opened SWMR file + * The dataset IDs are stored in a global array + * + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static hid_t +open_skeleton(const char *filename, unsigned verbose, unsigned old) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t fapl; /* File access property list */ + hid_t sid; /* Dataspace ID */ + hsize_t dim[2]; /* Dataspace dimensions */ + unsigned u, v; /* Local index variable */ + + HDassert(filename); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + if(!old) { + /* Set to use the latest library format */ + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + } + +#ifdef QAK +/* Increase the initial size of the metadata cache */ + { + H5AC_cache_config_t mdc_config; + + mdc_config.version = H5AC__CURR_CACHE_CONFIG_VERSION; + H5Pget_mdc_config(fapl, &mdc_config); + HDfprintf(stderr, "mdc_config.initial_size = %lu\n", (unsigned long)mdc_config.initial_size); + HDfprintf(stderr, "mdc_config.epoch_length = %lu\n", (unsigned long)mdc_config.epoch_length); + mdc_config.set_initial_size = 1; + mdc_config.initial_size = 16 * 1024 * 1024; + /* mdc_config.epoch_length = 5000; */ + H5Pset_mdc_config(fapl, &mdc_config); + } +#endif /* QAK */ + +#ifdef QAK + H5Pset_fapl_log(fapl, "append.log", H5FD_LOG_ALL, (size_t)(512 * 1024 * 1024)); +#endif /* QAK */ + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDWR | H5F_ACC_SWMR_WRITE, fapl)) < 0) + return -1; + + /* Close file access property list */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Opening datasets\n"); + + /* Open the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + if((symbol_info[u][v].dsid = H5Dopen2(fid, symbol_info[u][v].name, H5P_DEFAULT)) < 0) + return -1; + if((sid = H5Dget_space(symbol_info[u][v].dsid)) < 0) + return -1; + if(2 != H5Sget_simple_extent_ndims(sid)) + return -1; + if(H5Sget_simple_extent_dims(sid, dim, NULL) < 0) + return -1; + symbol_info[u][v].nrecords = dim[1]; + } /* end for */ + + return fid; +} + + +/*------------------------------------------------------------------------- + * Function: remove_records + * + * Purpose: Removes a specified number of records from random datasets in + * the SWMR test file. + * + * Parameters: hid_t fid + * The file ID of the SWMR HDF5 file + * + * unsigned verbose + * Whether or not to emit verbose console messages + * + * unsigned long nshrinks + * # of records to remove from the datasets + * + * unsigned long flush_count + * # of records to write before flushing the file to disk + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +remove_records(hid_t fid, unsigned verbose, unsigned long nshrinks, unsigned long flush_count) +{ + unsigned long shrink_to_flush; /* # of removals before flush */ + hsize_t dim[2] = {1,0}; /* Dataspace dimensions */ + unsigned long u, v; /* Local index variables */ + + HDassert(fid >= 0); + + /* Remove records from random datasets, according to frequency distribution */ + shrink_to_flush = flush_count; + for(u = 0; u < nshrinks; u++) { + symbol_info_t *symbol; /* Symbol to remove record from */ + hsize_t remove_size; /* Size to reduce dataset dimension by */ + + /* Get a random dataset, according to the symbol distribution */ + symbol = choose_dataset(); + + /* Shrink the dataset's dataspace */ + remove_size = (hsize_t)HDrandom() % MAX_REMOVE_SIZE + 1; + if(remove_size > symbol->nrecords) + symbol->nrecords = 0; + else + symbol->nrecords -= remove_size; + dim[1] = symbol->nrecords; + if(H5Dset_extent(symbol->dsid, dim) < 0) + return -1; + + /* Check for flushing file */ + if(flush_count > 0) { + /* Decrement count of records to write before flushing */ + shrink_to_flush--; + + /* Check for counter being reached */ + if(0 == shrink_to_flush) { + /* Flush contents of file */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + return -1; + + /* Reset flush counter */ + shrink_to_flush = flush_count; + } /* end if */ + } /* end if */ + } /* end for */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing datasets\n"); + + /* Close the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) + if(H5Dclose(symbol_info[u][v].dsid) < 0) + return -1; + + return 0; +} + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_remove_writer [-q] [-o] [-f <# of shrinks between flushing\n"); + printf(" file contents>] [-r <random seed>] <# of shrinks>\n"); + printf("\n"); + printf("<# of shrinks between flushing file contents> should be 0 (for no\n"); + printf("flushing) or between 1 and (<# of shrinks> - 1)\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given), latest format when opening file (no '-o' given),\n"); + printf("flushing every 1000 shrinks ('-f 1000'), and will generate a random seed (no -r given).\n"); + printf("\n"); + HDexit(1); +} + +int main(int argc, const char *argv[]) +{ + hid_t fid; /* File ID for file opened */ + long nshrinks = 0; /* # of times to shrink the dataset */ + long flush_count = 1000; /* # of records to write between flushing file */ + unsigned verbose = 1; /* Whether to emit some informational messages */ + unsigned old = 0; /* Whether to use non-latest-format when opening file */ + unsigned use_seed = 0; /* Set to 1 if a seed was set on the command line */ + unsigned random_seed = 0; /* Random # seed */ + unsigned u; /* Local index variable */ + int temp; + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* # of records to write between flushing file */ + case 'f': + flush_count = HDatol(argv[u + 1]); + if(flush_count < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = 0; + u++; + break; + + /* Random # seed */ + case 'r': + use_seed = 1; + temp = HDatoi(argv[u + 1]); + random_seed = (unsigned)temp; + u += 2; + break; + + /* Use non-latest-format when opening file */ + case 'o': + old = 1; + u++; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to append */ + nshrinks = HDatol(argv[u]); + if(nshrinks <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + if(nshrinks <= 0) + usage(); + if(flush_count >= nshrinks) + usage(); + + /* Emit informational message */ + if(verbose) { + HDfprintf(stderr, "Parameters:\n"); + HDfprintf(stderr, "\t# of shrinks between flushes = %ld\n", flush_count); + HDfprintf(stderr, "\t# of shrinks = %ld\n", nshrinks); + } /* end if */ + + /* Set the random seed */ + if(0 == use_seed) { + struct timeval t; + HDgettimeofday(&t, NULL); + random_seed = (unsigned)(t.tv_usec); + } /* end if */ + HDsrandom(random_seed); + /* ALWAYS emit the random seed for possible debugging */ + HDfprintf(stderr, "Using writer random seed: %u\n", random_seed); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Opening skeleton file: %s\n", FILENAME); + + /* Open file skeleton */ + if((fid = open_skeleton(FILENAME, verbose, old)) < 0) { + HDfprintf(stderr, "Error opening skeleton file!\n"); + HDexit(1); + } /* end if */ + + /* Send a message to indicate "H5Fopen" is complete--releasing the file lock */ + h5_send_message(WRITER_MESSAGE, NULL, NULL); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Removing records\n"); + + /* Remove records from datasets */ + if(remove_records(fid, verbose, (unsigned long)nshrinks, (unsigned long)flush_count) < 0) { + HDfprintf(stderr, "Error removing records from datasets!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing objects\n"); + + /* Close objects opened */ + if(H5Fclose(fid) < 0) { + HDfprintf(stderr, "Error closing file!\n"); + HDexit(1); + } /* end if */ + + return 0; +} diff --git a/test/swmr_sparse_reader.c b/test/swmr_sparse_reader.c new file mode 100644 index 0000000..f755cd2 --- /dev/null +++ b/test/swmr_sparse_reader.c @@ -0,0 +1,449 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_sparse_reader.c + * + * Purpose: Reads data from a randomly selected subset of the datasets + * in the SWMR test file. Unlike the regular reader, these + * datasets will be shrinking. + * + * This program is intended to run concurrently with the + * swmr_sparse_writer program. + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/****************/ +/* Local Macros */ +/****************/ + +#define TIMEOUT 300 + +/*******************/ +/* Local Variables */ +/*******************/ + +static hid_t symbol_tid = (-1); + +/********************/ +/* Local Prototypes */ +/********************/ + +static int check_dataset(hid_t fid, unsigned verbose, const symbol_info_t *symbol, + symbol_t *record, hid_t rec_sid); +static int read_records(const char *filename, unsigned verbose, unsigned long nrecords, + unsigned poll_time, unsigned reopen_count); +static void usage(void); + + +/*------------------------------------------------------------------------- + * Function: check_dataset + * + * Purpose: For a given dataset, checks to make sure that the stated + * and actual sizes are the same. If they are not, then + * we have an inconsistent dataset due to a SWMR error. + * + * Parameters: hid_t fid + * The SWMR test file's ID. + * + * unsigned verbose + * Whether verbose console output is desired. + * + * const symbol_info_t *symbol + * The dataset from which to read (the ID is in the struct). + * Must be pre-allocated. + * + * symbol_t *record + * Memory for the record. Must be pre-allocated. + * + * hid_t rec_sid + * The memory dataspace for access. It's always the same so + * there is no need to re-create it every time this function + * is called. + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +check_dataset(hid_t fid, unsigned verbose, const symbol_info_t *symbol, symbol_t *record, + hid_t rec_sid) +{ + hid_t dsid; /* Dataset ID */ + hid_t file_sid; /* Dataset's space ID */ + hsize_t start[2] = {0, 0}; /* Hyperslab selection values */ + hsize_t count[2] = {1, 1}; /* Hyperslab selection values */ + + HDassert(fid >= 0); + HDassert(symbol); + HDassert(record); + HDassert(rec_sid >= 0); + + /* Open dataset for symbol */ + if((dsid = H5Dopen2(fid, symbol->name, H5P_DEFAULT)) < 0) + return -1; + + /* Get the dataset's dataspace */ + if((file_sid = H5Dget_space(dsid)) < 0) + return -1; + + /* Choose the random record in the dataset (will be the same as chosen by + * the writer) */ + start[1] = (hsize_t)HDrandom() % symbol->nrecords; + if(H5Sselect_hyperslab(file_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Symbol = '%s', location = %lld\n", symbol->name, (long long)start); + + /* Read record from dataset */ + record->rec_id = (uint64_t)ULLONG_MAX; + if(H5Dread(dsid, symbol_tid, rec_sid, file_sid, H5P_DEFAULT, record) < 0) + return -1; + + /* Verify record value */ + if(record->rec_id != start[1]) { + HDfprintf(stderr, "*** ERROR ***\n"); + HDfprintf(stderr, "Incorrect record value!\n"); + HDfprintf(stderr, "Symbol = '%s', location = %lld, record->rec_id = %llu\n", symbol->name, (long long)start, (unsigned long long)record->rec_id); + return -1; + } /* end if */ + + /* Close the dataset's dataspace */ + if(H5Sclose(file_sid) < 0) + return -1; + + /* Close dataset for symbol */ + if(H5Dclose(dsid) < 0) + return -1; + + return 0; +} /* end check_dataset() */ + + +/*------------------------------------------------------------------------- + * Function: read_records + * + * Purpose: For a given dataset, checks to make sure that the stated + * and actual sizes are the same. If they are not, then + * we have an inconsistent dataset due to a SWMR error. + * + * Parameters: const char *filename + * The SWMR test file's name. + * + * unsigned verbose + * Whether verbose console output is desired. + * + * unsigned long nrecords + * The total number of records to read. + * + * unsigned poll_time + * The amount of time to sleep (s). + * + * unsigned reopen_count + * + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +read_records(const char *filename, unsigned verbose, unsigned long nrecords, + unsigned poll_time, unsigned reopen_count) +{ + hid_t fid; /* File ID */ + hid_t aid; /* Attribute ID */ + time_t start_time; /* Starting time */ + hid_t mem_sid; /* Memory dataspace ID */ + symbol_t record; /* The record to add to the dataset */ + unsigned seed; /* Seed for random number generator */ + unsigned iter_to_reopen = reopen_count; /* # of iterations until reopen */ + unsigned long u; /* Local index variable */ + hid_t fapl; + + HDassert(filename); + HDassert(poll_time != 0); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + H5Pset_fclose_degree(fapl, H5F_CLOSE_SEMI); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Opening file: %s\n", filename); + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDONLY | H5F_ACC_SWMR_READ, fapl)) < 0) + return -1; + + /* Seed the random number generator with the attribute in the file */ + if((aid = H5Aopen(fid, "seed", H5P_DEFAULT)) < 0) + return -1; + if(H5Aread(aid, H5T_NATIVE_UINT, &seed) < 0) + return -1; + if(H5Aclose(aid) < 0) + return -1; + HDsrandom(seed); + + /* Reset the record */ + /* (record's 'info' field might need to change for each record written, also) */ + HDmemset(&record, 0, sizeof(record)); + + /* Create a dataspace for the record to read */ + if((mem_sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Reading records\n"); + + /* Get the starting time */ + start_time = HDtime(NULL); + + /* Read records */ + for(u = 0; u < nrecords; u++) { + symbol_info_t *symbol = NULL; /* Symbol (dataset) */ + htri_t attr_exists; /* Whether the sequence number attribute exists */ + unsigned long file_u; /* Attribute sequence number (writer's "u") */ + + /* Get a random dataset, according to the symbol distribution */ + symbol = choose_dataset(); + + /* Fill in "nrecords" field. Note that this depends on the writer + * using the same algorithm and "nrecords" */ + symbol->nrecords = nrecords / 5; + + /* Wait until we can read the dataset */ + do { + /* Check if sequence attribute exists */ + if((attr_exists = H5Aexists_by_name(fid, symbol->name, "seq", H5P_DEFAULT)) < 0) + return -1; + + if(attr_exists) { + /* Read sequence number attribute */ + if((aid = H5Aopen_by_name(fid, symbol->name, "seq", H5P_DEFAULT, H5P_DEFAULT)) < 0) + return -1; + if(H5Aread(aid, H5T_NATIVE_ULONG, &file_u) < 0) + return -1; + if(H5Aclose(aid) < 0) + return -1; + + /* Check if sequence number is at least u - if so, this should + * guarantee that this record has been written */ + if(file_u >= u) + break; + } /* end if */ + + /* Check for timeout */ + if(HDtime(NULL) >= (time_t)(start_time + (time_t)TIMEOUT)) { + HDfprintf(stderr, "Reader timed out\n"); + return -1; + } /* end if */ + + /* Pause */ + HDsleep(poll_time); + + /* Retrieve and print the collection of metadata read retries */ + if(print_metadata_retries_info(fid) < 0) + HDfprintf(stderr, "Warning: could not obtain metadata retries info\n"); + + /* Reopen the file */ + if(H5Fclose(fid) < 0) + return -1; + if((fid = H5Fopen(filename, H5F_ACC_RDONLY | H5F_ACC_SWMR_READ, fapl)) < 0) + return -1; + iter_to_reopen = reopen_count; + } while(1); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Checking dataset %lu\n", u); + + /* Check dataset */ + if(check_dataset(fid, verbose, symbol, &record, mem_sid) < 0) + return -1; + HDmemset(&record, 0, sizeof(record)); + + /* Check for reopen */ + iter_to_reopen--; + if(iter_to_reopen == 0) { + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Reopening file: %s\n", filename); + + /* Retrieve and print the collection of metadata read retries */ + if(print_metadata_retries_info(fid) < 0) + HDfprintf(stderr, "Warning: could not obtain metadata retries info\n"); + + /* Reopen the file */ + if(H5Fclose(fid) < 0) + return -1; + if((fid = H5Fopen(filename, H5F_ACC_RDONLY | H5F_ACC_SWMR_READ, fapl)) < 0) + return -1; + iter_to_reopen = reopen_count; + } /* end if */ + } /* end while */ + + /* Retrieve and print the collection of metadata read retries */ + if(print_metadata_retries_info(fid) < 0) + HDfprintf(stderr, "Warning: could not obtain metadata retries info\n"); + + /* Close file */ + if(H5Fclose(fid) < 0) + return -1; + + /* Close the memory dataspace */ + if(H5Sclose(mem_sid) < 0) + return -1; + + return 0; +} /* end read_records() */ + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_sparse_reader [-q] [-s <# of seconds to wait for writer>]\n"); + printf(" [-n <# of reads between reopens>] <# of records>\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given), 1 second wait ('-s 1') and 1 read\n"); + printf("between reopens ('-r 1')\n"); + printf("\n"); + printf("Note that the # of records *must* be the same as that supplied to\n"); + printf("swmr_sparse_writer\n"); + printf("\n"); + HDexit(1); +} /* end usage() */ + +int main(int argc, const char *argv[]) +{ + long nrecords = 0; /* # of records to read */ + int poll_time = 1; /* # of seconds to sleep when waiting for writer */ + int reopen_count = 1; /* # of reads between reopens */ + unsigned verbose = 1; /* Whether to emit some informational messages */ + unsigned u; /* Local index variables */ + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* # of reads between reopens */ + case 'n': + reopen_count = HDatoi(argv[u + 1]); + if(reopen_count < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = 0; + u++; + break; + + /* # of seconds between polling */ + case 's': + poll_time = HDatoi(argv[u + 1]); + if(poll_time < 0) + usage(); + u += 2; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to read */ + nrecords = HDatol(argv[u]); + if(nrecords <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + + /* Emit informational message */ + if(verbose) { + HDfprintf(stderr, "Parameters:\n"); + HDfprintf(stderr, "\t# of seconds between polling = %d\n", poll_time); + HDfprintf(stderr, "\t# of reads between reopens = %d\n", reopen_count); + HDfprintf(stderr, "\t# of records to read = %ld\n", nrecords); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) { + HDfprintf(stderr, "Error generating symbol names!\n"); + HDexit(1); + } /* end if */ + + /* Create datatype for creating datasets */ + if((symbol_tid = create_symbol_datatype()) < 0) + return -1; + + /* Reading records from datasets */ + if(read_records(FILENAME, verbose, (unsigned long) nrecords, (unsigned)poll_time, (unsigned)reopen_count) < 0) { + HDfprintf(stderr, "Error reading records from datasets!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing objects\n"); + + /* Close objects created */ + if(H5Tclose(symbol_tid) < 0) { + HDfprintf(stderr, "Error closing symbol datatype!\n"); + HDexit(1); + } /* end if */ + + return 0; +} diff --git a/test/swmr_sparse_writer.c b/test/swmr_sparse_writer.c new file mode 100644 index 0000000..13b21c2 --- /dev/null +++ b/test/swmr_sparse_writer.c @@ -0,0 +1,454 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + + /*------------------------------------------------------------------------- + * + * Created: swmr_sparse_writer.c + * + * Purpose: Writes data to a randomly selected subset of the datasets + * in the SWMR test file. + * + * This program is intended to run concurrently with the + * swmr_sparse_reader program. + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/****************/ +/* Local Macros */ +/****************/ + +#ifdef OUT +#define BUSY_WAIT 100000 +#endif /* OUT */ + +/********************/ +/* Local Prototypes */ +/********************/ + +static hid_t open_skeleton(const char *filename, unsigned verbose); +static int add_records(hid_t fid, unsigned verbose, unsigned long nrecords, + unsigned long flush_count); +static void usage(void); + + + +/*------------------------------------------------------------------------- + * Function: open_skeleton + * + * Purpose: Opens the SWMR HDF5 file and datasets. + * + * Parameters: const char *filename + * The filename of the SWMR HDF5 file to open + * + * unsigned verbose + * Whether or not to emit verbose console messages + * + * Return: Success: The file ID of the opened SWMR file + * The dataset IDs are stored in a global array + * + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static hid_t +open_skeleton(const char *filename, unsigned verbose) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t fapl; /* File access property list */ + hid_t aid; /* Attribute ID */ + unsigned seed; /* Seed for random number generator */ + unsigned u, v; /* Local index variable */ + + HDassert(filename); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + /* Set to use the latest library format */ + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + +#ifdef QAK + /* Increase the initial size of the metadata cache */ + { + H5AC_cache_config_t mdc_config; + + mdc_config.version = H5AC__CURR_CACHE_CONFIG_VERSION; + H5Pget_mdc_config(fapl, &mdc_config); + HDfprintf(stderr, "mdc_config.initial_size = %lu\n", (unsigned long)mdc_config.initial_size); + HDfprintf(stderr,"mdc_config.epoch_length = %lu\n", (unsigned long)mdc_config.epoch_length); + mdc_config.set_initial_size = 1; + mdc_config.initial_size = 16 * 1024 * 1024; + /* mdc_config.epoch_length = 5000; */ + H5Pset_mdc_config(fapl, &mdc_config); + } +#endif /* QAK */ + +#ifdef QAK + H5Pset_fapl_log(fapl, "append.log", H5FD_LOG_ALL, (size_t)(512 * 1024 * 1024)); +#endif /* QAK */ + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDWR | H5F_ACC_SWMR_WRITE, fapl)) < 0) + return -1; + + /* Close file access property list */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + fprintf(stderr, "Opening datasets\n"); + + /* Seed the random number generator with the attribute in the file */ + if((aid = H5Aopen(fid, "seed", H5P_DEFAULT)) < 0) + return -1; + if(H5Aread(aid, H5T_NATIVE_UINT, &seed) < 0) + return -1; + if(H5Aclose(aid) < 0) + return -1; + HDsrandom(seed); + + /* Open the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + if((symbol_info[u][v].dsid = H5Dopen2(fid, symbol_info[u][v].name, H5P_DEFAULT)) < 0) + return(-1); + symbol_info[u][v].nrecords = 0; + } /* end for */ + + return fid; +} + + +/*------------------------------------------------------------------------- + * Function: add_records + * + * Purpose: Writes a specified number of records to random datasets in + * the SWMR test file. + * + * Parameters: hid_t fid + * The file ID of the SWMR HDF5 file + * + * unsigned verbose + * Whether or not to emit verbose console messages + * + * unsigned long nrecords + * # of records to write to the datasets + * + * unsigned long flush_count + * # of records to write before flushing the file to disk + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +add_records(hid_t fid, unsigned verbose, unsigned long nrecords, unsigned long flush_count) +{ + hid_t tid; /* Datatype ID for records */ + hid_t mem_sid; /* Memory dataspace ID */ + hsize_t start[2] = {0, 0}; /* Hyperslab selection values */ + hsize_t count[2] = {1, 1}; /* Hyperslab selection values */ + symbol_t record; /* The record to add to the dataset */ + unsigned long rec_to_flush; /* # of records left to write before flush */ +#ifdef OUT + volatile int dummy; /* Dummy varialbe for busy sleep */ +#endif /* OUT */ + hsize_t dim[2] = {1,0}; /* Dataspace dimensions */ + unsigned long u, v; /* Local index variables */ + + HDassert(fid >= 0); + + /* Reset the record */ + /* (record's 'info' field might need to change for each record written, also) */ + HDmemset(&record, 0, sizeof(record)); + + /* Create a dataspace for the record to add */ + if((mem_sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + + /* Create datatype for appending records */ + if((tid = create_symbol_datatype()) < 0) + return -1; + + /* Add records to random datasets, according to frequency distribution */ + rec_to_flush = flush_count; + for(u = 0; u < nrecords; u++) { + symbol_info_t *symbol; /* Symbol to write record to */ + hid_t file_sid; /* Dataset's space ID */ + hid_t aid; /* Attribute ID */ + hbool_t corked; /* Whether the dataset was corked */ + + /* Get a random dataset, according to the symbol distribution */ + symbol = choose_dataset(); + + /* If this is the first time the dataset has been opened, extend it and + * add the sequence attribute */ + if(symbol->nrecords == 0) { + symbol->nrecords = nrecords / 5; + dim[1] = symbol->nrecords; + + /* Cork the metadata cache, to prevent the object header from being + * flushed before the data has been written */ + if(H5Odisable_mdc_flushes(symbol->dsid) < 0) + return -1; + corked = TRUE; + + if(H5Dset_extent(symbol->dsid, dim) < 0) + return -1; + + if((file_sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + if((aid = H5Acreate2(symbol->dsid, "seq", H5T_NATIVE_ULONG, file_sid, H5P_DEFAULT, H5P_DEFAULT)) < 0) + return -1; + if(H5Sclose(file_sid) < 0) + return -1; + } /* end if */ + else { + if((aid = H5Aopen(symbol->dsid, "seq", H5P_DEFAULT)) < 0) + return -1; + corked = FALSE; + } /* end else */ + + /* Get the coordinate to write */ + start[1] = (hsize_t)HDrandom() % symbol->nrecords; + + /* Set the record's ID (equal to its position) */ + record.rec_id = start[1]; + + /* Get the dataset's dataspace */ + if((file_sid = H5Dget_space(symbol->dsid)) < 0) + return -1; + + /* Choose a random record in the dataset */ + if(H5Sselect_hyperslab(file_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0) + return -1; + + /* Write record to the dataset */ + if(H5Dwrite(symbol->dsid, tid, mem_sid, file_sid, H5P_DEFAULT, &record) < 0) + return -1; + + /* Write the sequence number attribute. Since we synchronize the random + * number seed, the readers will always generate the same sequence of + * randomly chosen datasets and offsets. Therefore, and because of the + * flush dependencies on the object header, the reader will be + * guaranteed to see the written data if the sequence attribute is >=u. + */ + if(H5Awrite(aid, H5T_NATIVE_ULONG, &u) < 0) + return -1; + + /* Close the attribute */ + if(H5Aclose(aid) < 0) + return -1; + + /* Uncork the metadata cache, if it's been */ + if(corked) + if(H5Oenable_mdc_flushes(symbol->dsid) < 0) + return -1; + + /* Close the dataset's dataspace */ + if(H5Sclose(file_sid) < 0) + return -1; + + /* Check for flushing file */ + if(flush_count > 0) { + /* Decrement count of records to write before flushing */ + rec_to_flush--; + + /* Check for counter being reached */ + if(0 == rec_to_flush) { + /* Flush contents of file */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + return -1; + + /* Reset flush counter */ + rec_to_flush = flush_count; + } /* end if */ + } /* end if */ + +#ifdef OUT + /* Busy wait, to let readers catch up */ + /* If this is removed, also remove the BUSY_WAIT symbol + * at the top of the file. + */ + dummy = 0; + for(v=0; v<BUSY_WAIT; v++) + dummy++; + if((unsigned long)dummy != v) + return -1; +#endif /* OUT */ + + } /* end for */ + + /* Close the memory dataspace */ + if(H5Sclose(mem_sid) < 0) + return -1; + + /* Close the datatype */ + if(H5Tclose(tid) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + fprintf(stderr, "Closing datasets\n"); + + /* Close the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) + if(H5Dclose(symbol_info[u][v].dsid) < 0) + return -1; + + return 0; +} + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_sparse_writer [-q] [-f <# of records to write between\n"); + printf(" flushing file contents>] <# of records>\n"); + printf("\n"); + printf("<# of records to write between flushing file contents> should be 0\n"); + printf("(for no flushing) or between 1 and (<# of records> - 1)\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given) and flushing every 1000 records\n"); + printf("('-f 1000')\n"); + printf("\n"); + HDexit(1); +} + +int main(int argc, const char *argv[]) +{ + hid_t fid; /* File ID for file opened */ + long nrecords = 0; /* # of records to append */ + long flush_count = 1000; /* # of records to write between flushing file */ + unsigned verbose = 1; /* Whether to emit some informational messages */ + unsigned u; /* Local index variable */ + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* # of records to write between flushing file */ + case 'f': + flush_count = HDatol(argv[u + 1]); + if(flush_count < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = 0; + u++; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to append */ + nrecords = HDatol(argv[u]); + if(nrecords <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + if(nrecords <= 0) + usage(); + if(flush_count >= nrecords) + usage(); + + /* Emit informational message */ + if(verbose) { + HDfprintf(stderr, "Parameters:\n"); + HDfprintf(stderr, "\t# of records between flushes = %ld\n", flush_count); + HDfprintf(stderr, "\t# of records to write = %ld\n", nrecords); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Opening skeleton file: %s\n", FILENAME); + + /* Open file skeleton */ + if((fid = open_skeleton(FILENAME, verbose)) < 0) { + HDfprintf(stderr, "Error opening skeleton file!\n"); + HDexit(1); + } /* end if */ + + /* Send a message to indicate "H5Fopen" is complete--releasing the file lock */ + h5_send_message(WRITER_MESSAGE, NULL, NULL); + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Adding records\n"); + + /* Append records to datasets */ + if(add_records(fid, verbose, (unsigned long)nrecords, (unsigned long)flush_count) < 0) { + HDfprintf(stderr, "Error appending records to datasets!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(stderr, "Closing objects\n"); + + /* Close objects opened */ + if(H5Fclose(fid) < 0) { + HDfprintf(stderr, "Error closing file!\n"); + HDexit(1); + } /* end if */ + + return 0; +} diff --git a/test/swmr_start_write.c b/test/swmr_start_write.c new file mode 100644 index 0000000..26a3dab --- /dev/null +++ b/test/swmr_start_write.c @@ -0,0 +1,713 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_start_write.c + * + * Purpose: This program enables SWMR writing mode via H5Fstart_swmr_write(). + * It writes data to a randomly selected subset of the datasets + * in the SWMR test file; and it is intended to run concurrently + * with the swmr_reader program. + * + * NOTE: The routines in this program are basically copied and modified from + * swmr*.c. + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/********************/ +/* Local Prototypes */ +/********************/ + +static hid_t create_file(const char *filename, hbool_t verbose, + FILE *verbose_file, unsigned random_seed); +static int create_datasets(hid_t fid, int comp_level, hbool_t verbose, + FILE *verbose_file, const char *index_type); +static int create_close_datasets(hid_t fid, int comp_level, hbool_t verbose, + FILE *verbose_file); +static int open_datasets(hid_t fid, hbool_t verbose, FILE *verbose_file); +static hid_t open_file(const char *filename, hbool_t verbose, + FILE *verbose_file); +static int add_records(hid_t fid, hbool_t verbose, FILE *verbose_file, + unsigned long nrecords, unsigned long flush_count); +static void usage(void); + +#define CHUNK_SIZE 50 /* Chunk size for created datasets */ + + +/*------------------------------------------------------------------------- + * Function: create_file + * + * Purpose: Creates the HDF5 file (without SWMR access) which + * which will be used for testing H5Fstart_swmr_write(). + * + * Parameters: + * filename: The SWMR test file's name. + * verbose: whether verbose console output is desired. + * verbose_file: file pointer for verbose output + * random_seed: The random seed to store in the file. + * The sparse tests use this value. + * + * Return: Success: the file ID + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static hid_t +create_file(const char *filename, hbool_t verbose, FILE *verbose_file, + unsigned random_seed) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t fcpl; /* File creation property list */ + hid_t fapl; /* File access property list */ + hid_t sid; /* Dataspace ID */ + hid_t aid; /* Attribute ID */ + + HDassert(filename); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + /* We ALWAYS select the latest file format for SWMR */ + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + + if(verbose) { + char verbose_name[1024]; + + HDsnprintf(verbose_name, sizeof(verbose_name), "swmr_start_write.log.%u", random_seed); + + H5Pset_fapl_log(fapl, verbose_name, H5FD_LOG_ALL, (size_t)(512 * 1024 * 1024)); + } /* end if */ + + /* Create file creation property list */ + if((fcpl = H5Pcreate(H5P_FILE_CREATE)) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Creating file without SWMR access\n"); + + /* Create the file */ + if((fid = H5Fcreate(filename, H5F_ACC_TRUNC, fcpl, fapl)) < 0) + return -1; + + /* Close file creation property list */ + if(H5Pclose(fcpl) < 0) + return -1; + + /* Close file access property list */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Create attribute with (shared) random number seed - for sparse test */ + if((sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + if((aid = H5Acreate2(fid, "seed", H5T_NATIVE_UINT, sid, H5P_DEFAULT, H5P_DEFAULT)) < 0) + return -1; + if(H5Awrite(aid, H5T_NATIVE_UINT, &random_seed) < 0) + return -1; + if(H5Sclose(sid) < 0) + return -1; + if(H5Aclose(aid) < 0) + return -1; + + return fid; +} /* end create_file() */ + + +/*------------------------------------------------------------------------- + * Function: create_datasets + * + * Purpose: Create datasets (and keep them opened) which will be used for testing + * H5Fstart_swmr_write(). + * + * Parameters: + * fid: file ID for the SWMR test file + * comp_level: the compresssion level + * index_type: The chunk index type (b1 | b2 | ea | fa) + * verbose: whether verbose console output is desired. + * verbose_file: file pointer for verbose output + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +create_datasets(hid_t fid, int comp_level, hbool_t verbose, FILE *verbose_file, + const char *index_type) +{ + hid_t dcpl; /* Dataset creation property list */ + hid_t tid; /* Datatype for dataset elements */ + hid_t sid; /* Dataspace ID */ + hsize_t dims[2] = {1, 0}; /* Dataset starting dimensions */ + hsize_t max_dims[2] = {1, H5S_UNLIMITED}; /* Dataset maximum dimensions */ + hsize_t chunk_dims[2] = {1, CHUNK_SIZE}; /* Chunk dimensions */ + unsigned u, v; /* Local index variable */ + + HDassert(index_type); + + /* Create datatype for creating datasets */ + if((tid = create_symbol_datatype()) < 0) + return -1; + + /* There are two chunk indexes tested here. + * With one unlimited dimension, we get the extensible array index + * type, with two unlimited dimensions, we get a v-2 B-tree. + */ + if(!HDstrcmp(index_type, "b2")) + max_dims[0] = H5S_UNLIMITED; + + /* Create dataspace for creating datasets */ + if((sid = H5Screate_simple(2, dims, max_dims)) < 0) + return -1; + + /* Create dataset creation property list */ + if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) + return -1; + if(H5Pset_chunk(dcpl, 2, chunk_dims) < 0) + return -1; + if(comp_level >= 0) { + if(H5Pset_deflate(dcpl, (unsigned)comp_level) < 0) + return -1; + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Creating datasets\n"); + + /* Create the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + + if((symbol_info[u][v].dsid = H5Dcreate2(fid, symbol_info[u][v].name, tid, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) + return -1; + symbol_info[u][v].nrecords = 0; + + } /* end for */ + + return 0; +} /* create_datasets() */ + + +/*------------------------------------------------------------------------- + * Function: create_close_datasets + * + * Purpose: Create and close datasets which will be used for testing + * H5Fstart_swmr_write(). + * + * Parameters: + * fid: file ID for the SWMR test file + * comp_level: the compresssion level + * verbose: whether verbose console output is desired. + * verbose_file: file pointer for verbose output + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +create_close_datasets(hid_t fid, int comp_level, hbool_t verbose, FILE *verbose_file) +{ + hid_t dcpl; /* Dataset creation property list */ + hid_t tid; /* Datatype for dataset elements */ + hid_t sid; /* Dataspace ID */ + hsize_t dims[2] = {1, 0}; /* Dataset starting dimensions */ + hsize_t max_dims[2] = {1, H5S_UNLIMITED}; /* Dataset maximum dimensions */ + hsize_t chunk_dims[2] = {1, CHUNK_SIZE}; /* Chunk dimensions */ + unsigned u, v; /* Local index variable */ + + /* Create datatype for creating datasets */ + if((tid = create_symbol_datatype()) < 0) + return -1; + + /* Create dataspace for creating datasets */ + if((sid = H5Screate_simple(2, dims, max_dims)) < 0) + return -1; + + /* Create dataset creation property list */ + if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) + return -1; + if(H5Pset_chunk(dcpl, 2, chunk_dims) < 0) + return -1; + if(comp_level >= 0) { + if(H5Pset_deflate(dcpl, (unsigned)comp_level) < 0) + return -1; + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Creating datasets\n"); + + /* Create the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + hid_t dsid; /* Dataset ID */ + char name_buf[64]; + + generate_name(name_buf, u, v); + if((dsid = H5Dcreate2(fid, name_buf, tid, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) + return -1; + + if(H5Dclose(dsid) < 0) + return -1; + } /* end for */ + + /* Closing */ + if(H5Pclose(dcpl) < 0) + return -1; + if(H5Sclose(sid) < 0) + return -1; + if(H5Tclose(tid) < 0) + return -1; + + return 0; +} /* create_close_datasets() */ + + +/*------------------------------------------------------------------------- + * Function: open_file + * + * Purpose: Opens the HDF5 test file without SWMR access. + * + * Parameters: + * filename: The filename of the HDF5 file to open + * verbose: whether or not to emit verbose console messages + * verbose_file: file pointer for verbose output + * + * Return: Success: The file ID of the opened SWMR file + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static hid_t +open_file(const char *filename, hbool_t verbose, FILE *verbose_file) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t fapl; /* File access property list */ + + HDassert(filename); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + /* Set to use the latest library format */ + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Opening the file without SWMR access: %s\n", filename); + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0) + return -1; + + /* Close file access property list */ + if(H5Pclose(fapl) < 0) + return -1; + + return fid; +} /* Open file() */ + + + +/*------------------------------------------------------------------------- + * Function: open_datasets + * + * Purpose: Opens the datasets. + * + * Parameters: + * filename: the filename of the SWMR HDF5 file to open + * verbose: whether or not to emit verbose console messages + * verbose_file: file pointer for verbose output + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +open_datasets(hid_t fid, hbool_t verbose, FILE *verbose_file) +{ + unsigned u, v; /* Local index variable */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Opening datasets\n"); + + /* Open the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + if((symbol_info[u][v].dsid = H5Dopen2(fid, symbol_info[u][v].name, H5P_DEFAULT)) < 0) + return -1; + symbol_info[u][v].nrecords = 0; + } /* end for */ + + return 0; +} /* open_datasets() */ + + +/*------------------------------------------------------------------------- + * Function: add_records + * + * Purpose: Writes a specified number of records to random datasets in + * the SWMR test file. + * + * Parameters: + * fid: The file ID of the SWMR HDF5 file + * verbose: Whether or not to emit verbose console messages + * verbose_file: file pointer for verbose output + * nrecords: # of records to write to the datasets + * flush_count: # of records to write before flushing the file to disk + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +add_records(hid_t fid, hbool_t verbose, FILE *verbose_file, + unsigned long nrecords, unsigned long flush_count) +{ + hid_t tid; /* Datatype ID for records */ + hid_t mem_sid; /* Memory dataspace ID */ + hsize_t start[2] = {0, 0}, count[2] = {1, 1}; /* Hyperslab selection values */ + hsize_t dim[2] = {1, 0}; /* Dataspace dimensions */ + symbol_t record; /* The record to add to the dataset */ + unsigned long rec_to_flush; /* # of records left to write before flush */ + unsigned long u, v; /* Local index variables */ + + HDassert(fid >= 0); + + /* Reset the record */ + /* (record's 'info' field might need to change for each record written, also) */ + HDmemset(&record, 0, sizeof(record)); + + /* Create a dataspace for the record to add */ + if((mem_sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + + /* Create datatype for appending records */ + if((tid = create_symbol_datatype()) < 0) + return -1; + + /* Add records to random datasets, according to frequency distribution */ + rec_to_flush = flush_count; + for(u = 0; u < nrecords; u++) { + symbol_info_t *symbol; /* Symbol to write record to */ + hid_t file_sid; /* Dataset's space ID */ + + /* Get a random dataset, according to the symbol distribution */ + symbol = choose_dataset(); + + /* Set the record's ID (equal to its position) */ + record.rec_id = symbol->nrecords; + + /* Get the coordinate to write */ + start[1] = symbol->nrecords; + + /* Cork the metadata cache, to prevent the object header from being + * flushed before the data has been written */ + if(H5Odisable_mdc_flushes(symbol->dsid) < 0) + return -1; + + /* Extend the dataset's dataspace to hold the new record */ + symbol->nrecords++; + dim[1] = symbol->nrecords; + if(H5Dset_extent(symbol->dsid, dim) < 0) + return -1; + + /* Get the dataset's dataspace */ + if((file_sid = H5Dget_space(symbol->dsid)) < 0) + return -1; + + /* Choose the last record in the dataset */ + if(H5Sselect_hyperslab(file_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0) + return -1; + + /* Write record to the dataset */ + if(H5Dwrite(symbol->dsid, tid, mem_sid, file_sid, H5P_DEFAULT, &record) < 0) + return -1; + + /* Uncork the metadata cache */ + if(H5Oenable_mdc_flushes(symbol->dsid) < 0) + return -1; + + /* Close the dataset's dataspace */ + if(H5Sclose(file_sid) < 0) + return -1; + + /* Check for flushing file */ + if(flush_count > 0) { + /* Decrement count of records to write before flushing */ + rec_to_flush--; + + /* Check for counter being reached */ + if(0 == rec_to_flush) { + /* Flush contents of file */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + return -1; + + /* Reset flush counter */ + rec_to_flush = flush_count; + } /* end if */ + } /* end if */ + } /* end for */ + + /* Close the memory dataspace */ + if(H5Sclose(mem_sid) < 0) + return -1; + + /* Close the datatype */ + if(H5Tclose(tid) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Closing datasets\n"); + + /* Close the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) + if(H5Dclose(symbol_info[u][v].dsid) < 0) + return -1; + + return 0; +} /* add_records() */ + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_start_write [-f <# of records to write between flushing file contents>]\n"); + printf(" [-i <index type>] [-c <deflate compression level>]\n"); + printf(" [-r <random seed>] [-q] <# of records>\n"); + printf("\n"); + printf("<# of records to write between flushing file contents> should be 0\n"); + printf("(for no flushing) or between 1 and (<# of records> - 1).\n"); + printf("\n"); + printf("<index type> should be b2 or ea\n"); + printf("\n"); + printf("<deflate compression level> should be -1 (for no compression) or 0-9\n"); + printf("\n"); + printf("<# of records> must be specified.\n"); + printf("\n"); + printf("Defaults to flushing every 10000 records ('-f 10000'),\n"); + printf("v1 b-tree indexing (-i b1), compression ('-c -1'),\n"); + printf("will generate a random seed (no -r given), and verbose (no '-q' given)\n"); + printf("\n"); + HDexit(1); +} /* usage() */ + +/* + * Can test with different scenarios as below: + * 1) create_file(), create_datasets(), H5Fstart_swmr_write(), add_records(), H5Fclose(). + * 2) create_file(), create_close_datasets(), open_datasets(), H5Fstart_swmr_write(), add_records(), H5Fclose(). + * 3) create_file(), create_close_datasets(), H5Fclose(), + * open_file(), open_dataset(), H5Fstart_swmr_write(), add_records(), H5Fclose(). + */ +int main(int argc, const char *argv[]) +{ + hid_t fid; /* File ID for file opened */ + long nrecords = 0; /* # of records to append */ + long flush_count = 10000; /* # of records to write between flushing file */ + hbool_t verbose = TRUE; /* Whether to emit some informational messages */ + FILE *verbose_file = NULL; /* File handle for verbose output */ + hbool_t use_seed = FALSE; /* Set to TRUE if a seed was set on the command line */ + unsigned random_seed = 0; /* Random # seed */ + int comp_level = -1; /* Compression level (-1 is no compression) */ + const char *index_type = "b1"; /* Chunk index type */ + unsigned u; /* Local index variable */ + int temp; /* Temporary variable */ + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* Compress dataset chunks */ + case 'c': + comp_level = HDatoi(argv[u + 1]); + if(comp_level < -1 || comp_level > 9) + usage(); + u += 2; + break; + + /* Chunk index type */ + case 'i': + index_type = argv[u + 1]; + if(HDstrcmp(index_type, "ea") + && HDstrcmp(index_type, "b2")) + usage(); + u += 2; + break; + + /* # of records to write between flushing file */ + case 'f': + flush_count = HDatol(argv[u + 1]); + if(flush_count < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = FALSE; + u++; + break; + + /* Random # seed */ + case 'r': + use_seed = TRUE; + temp = HDatoi(argv[u + 1]); + if(temp < 0) + usage(); + else + random_seed = (unsigned)temp; + u += 2; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to append */ + nrecords = HDatol(argv[u]); + if(nrecords <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + + if(nrecords <= 0) + usage(); + if(flush_count >= nrecords) + usage(); + + /* Set the random seed */ + if(!use_seed) { + struct timeval t; + + HDgettimeofday(&t, NULL); + random_seed = (unsigned)(t.tv_usec); + } /* end if */ + HDsrandom(random_seed); + + /* Open output file */ + if(verbose) { + char verbose_name[1024]; + + HDsnprintf(verbose_name, sizeof(verbose_name), "swmr_writer.out.%u", random_seed); + if(NULL == (verbose_file = HDfopen(verbose_name, "w"))) { + HDfprintf(stderr, "Can't open verbose output file!\n"); + HDexit(1); + } + } /* end if */ + + /* Emit informational message */ + if(verbose) { + HDfprintf(verbose_file, "Parameters:\n"); + HDfprintf(verbose_file, "\tindex type = %s\n", index_type); + HDfprintf(verbose_file, "\tcompression level = %d\n", comp_level); + HDfprintf(verbose_file, "\t# of records between flushes = %ld\n", flush_count); + HDfprintf(verbose_file, "\t# of records to write = %ld\n", nrecords); + } /* end if */ + + /* ALWAYS emit the random seed for possible debugging */ + HDfprintf(stdout, "Using writer random seed: %u\n", random_seed); + + /* Create the test file */ + if((fid = create_file(FILENAME, verbose, verbose_file, random_seed)) < 0) { + HDfprintf(stderr, "Error creating the file...\n"); + HDexit(1); + } + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) + return -1; + + /* Create the datasets in the file */ + if(create_datasets(fid, comp_level, verbose, verbose_file, index_type) < 0) { + HDfprintf(stderr, "Error creating datasets...\n"); + HDexit(1); + } + + /* Enable SWMR writing mode */ + if(H5Fstart_swmr_write(fid) < 0) { + HDfprintf(stderr, "Error starting SWMR writing mode...\n"); + HDexit(1); + } + + /* Send a message to indicate "H5Fopen" is complete--releasing the file lock */ + h5_send_message(WRITER_MESSAGE, NULL, NULL); + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Adding records\n"); + + /* Append records to datasets */ + if(add_records(fid, verbose, verbose_file, (unsigned long)nrecords, (unsigned long)flush_count) < 0) { + HDfprintf(stderr, "Error appending records to datasets!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Closing the file\n"); + + /* Close objects opened */ + if(H5Fclose(fid) < 0) { + HDfprintf(stderr, "Error closing file!\n"); + HDexit(1); + } /* end if */ + + return 0; +} /* main() */ + diff --git a/test/swmr_writer.c b/test/swmr_writer.c new file mode 100644 index 0000000..4700e2f --- /dev/null +++ b/test/swmr_writer.c @@ -0,0 +1,450 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*------------------------------------------------------------------------- + * + * Created: swmr_writer.c + * + * Purpose: Writes data to a randomly selected subset of the datasets + * in the SWMR test file. + * + * This program is intended to run concurrently with the + * swmr_reader program. + * + *------------------------------------------------------------------------- + */ + +/***********/ +/* Headers */ +/***********/ + +#include "h5test.h" +#include "swmr_common.h" + +/********************/ +/* Local Prototypes */ +/********************/ + +static hid_t open_skeleton(const char *filename, hbool_t verbose, FILE *verbose_file, + unsigned random_seed, hbool_t old); +static int add_records(hid_t fid, hbool_t verbose, FILE *verbose_file, + unsigned long nrecords, unsigned long flush_count); +static void usage(void); + + +/*------------------------------------------------------------------------- + * Function: open_skeleton + * + * Purpose: Opens the SWMR HDF5 file and datasets. + * + * Parameters: const char *filename + * The filename of the SWMR HDF5 file to open + * + * hbool_t verbose + * Whether or not to emit verbose console messages + * + * FILE *verbose_file + * File handle for verbose output + * + * unsigned random_seed + * Random seed for the file (used for verbose logging) + * + * hbool_t old + * Whether to write in "old" file format + * + * Return: Success: The file ID of the opened SWMR file + * The dataset IDs are stored in a global array + * + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static hid_t +open_skeleton(const char *filename, hbool_t verbose, FILE *verbose_file, + unsigned random_seed, hbool_t old) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t fapl; /* File access property list */ + unsigned u, v; /* Local index variable */ + + HDassert(filename); + + /* Create file access property list */ + if((fapl = h5_fileaccess()) < 0) + return -1; + + if(!old) { + /* Set to use the latest library format */ + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + } + +#ifdef QAK + /* Increase the initial size of the metadata cache */ + { + H5AC_cache_config_t mdc_config; + + mdc_config.version = H5AC__CURR_CACHE_CONFIG_VERSION; + H5Pget_mdc_config(fapl, &mdc_config); + HDfprintf(stderr, "mdc_config.initial_size = %lu\n", (unsigned long)mdc_config.initial_size); + HDfprintf(stderr, "mdc_config.epoch_length = %lu\n", (unsigned long)mdc_config.epoch_length); + mdc_config.set_initial_size = 1; + mdc_config.initial_size = 16 * 1024 * 1024; + /* mdc_config.epoch_length = 5000; */ + H5Pset_mdc_config(fapl, &mdc_config); + } +#endif /* QAK */ + + if(verbose) { + char verbose_name[1024]; + + HDsnprintf(verbose_name, sizeof(verbose_name), "swmr_writer.log.%u", random_seed); + + H5Pset_fapl_log(fapl, verbose_name, H5FD_LOG_ALL, (size_t)(512 * 1024 * 1024)); + } /* end if */ + + /* Open the file */ + if((fid = H5Fopen(filename, H5F_ACC_RDWR | H5F_ACC_SWMR_WRITE, fapl)) < 0) + return -1; + + /* Close file access property list */ + if(H5Pclose(fapl) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Opening datasets\n"); + + /* Open the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) { + if((symbol_info[u][v].dsid = H5Dopen2(fid, symbol_info[u][v].name, H5P_DEFAULT)) < 0) + return -1; + symbol_info[u][v].nrecords = 0; + } /* end for */ + + return fid; +} + + +/*------------------------------------------------------------------------- + * Function: add_records + * + * Purpose: Writes a specified number of records to random datasets in + * the SWMR test file. + * + * Parameters: hid_t fid + * The file ID of the SWMR HDF5 file + * + * hbool_t verbose + * Whether or not to emit verbose console messages + * + * FILE *verbose_file + * File handle for verbose output + * + * unsigned long nrecords + * # of records to write to the datasets + * + * unsigned long flush_count + * # of records to write before flushing the file to disk + * + * Return: Success: 0 + * Failure: -1 + * + *------------------------------------------------------------------------- + */ +static int +add_records(hid_t fid, hbool_t verbose, FILE *verbose_file, + unsigned long nrecords, unsigned long flush_count) +{ + hid_t tid; /* Datatype ID for records */ + hid_t mem_sid; /* Memory dataspace ID */ + hsize_t start[2] = {0, 0}, count[2] = {1, 1}; /* Hyperslab selection values */ + hsize_t dim[2] = {1, 0}; /* Dataspace dimensions */ + symbol_t record; /* The record to add to the dataset */ + unsigned long rec_to_flush; /* # of records left to write before flush */ + unsigned long u, v; /* Local index variables */ + + HDassert(fid >= 0); + + /* Reset the record */ + /* (record's 'info' field might need to change for each record written, also) */ + HDmemset(&record, 0, sizeof(record)); + + /* Create a dataspace for the record to add */ + if((mem_sid = H5Screate(H5S_SCALAR)) < 0) + return -1; + + /* Create datatype for appending records */ + if((tid = create_symbol_datatype()) < 0) + return -1; + + /* Add records to random datasets, according to frequency distribution */ + rec_to_flush = flush_count; + for(u = 0; u < nrecords; u++) { + symbol_info_t *symbol; /* Symbol to write record to */ + hid_t file_sid; /* Dataset's space ID */ + + /* Get a random dataset, according to the symbol distribution */ + symbol = choose_dataset(); + + /* Set the record's ID (equal to its position) */ + record.rec_id = symbol->nrecords; + + /* Get the coordinate to write */ + start[1] = symbol->nrecords; + + /* Cork the metadata cache, to prevent the object header from being + * flushed before the data has been written */ + if(H5Odisable_mdc_flushes(symbol->dsid) < 0) + return -1; + + /* Extend the dataset's dataspace to hold the new record */ + symbol->nrecords++; + dim[1] = symbol->nrecords; + if(H5Dset_extent(symbol->dsid, dim) < 0) + return -1; + + /* Get the dataset's dataspace */ + if((file_sid = H5Dget_space(symbol->dsid)) < 0) + return -1; + + /* Choose the last record in the dataset */ + if(H5Sselect_hyperslab(file_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0) + return -1; + + /* Write record to the dataset */ + if(H5Dwrite(symbol->dsid, tid, mem_sid, file_sid, H5P_DEFAULT, &record) < 0) + return -1; + + /* Uncork the metadata cache */ + if(H5Oenable_mdc_flushes(symbol->dsid) < 0) + return -1; + + /* Close the dataset's dataspace */ + if(H5Sclose(file_sid) < 0) + return -1; + + /* Check for flushing file */ + if(flush_count > 0) { + /* Decrement count of records to write before flushing */ + rec_to_flush--; + + /* Check for counter being reached */ + if(0 == rec_to_flush) { + /* Flush contents of file */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + return -1; + + /* Reset flush counter */ + rec_to_flush = flush_count; + } /* end if */ + } /* end if */ + } /* end for */ + + /* Close the memory dataspace */ + if(H5Sclose(mem_sid) < 0) + return -1; + + /* Close the datatype */ + if(H5Tclose(tid) < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Closing datasets\n"); + + /* Close the datasets */ + for(u = 0; u < NLEVELS; u++) + for(v = 0; v < symbol_count[u]; v++) + if(H5Dclose(symbol_info[u][v].dsid) < 0) + return -1; + + return 0; +} + +static void +usage(void) +{ + printf("\n"); + printf("Usage error!\n"); + printf("\n"); + printf("Usage: swmr_writer [-q] [-o] [-f <# of records to write between flushing\n"); + printf(" file contents>] [-r <random seed>] <# of records>\n"); + printf("\n"); + printf("<# of records to write between flushing file contents> should be 0\n"); + printf("(for no flushing) or between 1 and (<# of records> - 1).\n"); + printf("\n"); + printf("<# of records> must be specified.\n"); + printf("\n"); + printf("Defaults to verbose (no '-q' given), latest format when opening file (no '-o' given),\n"); + printf("flushing every 10000 records ('-f 10000'), and will generate a random seed (no -r given).\n"); + printf("\n"); + HDexit(1); +} + +int main(int argc, const char *argv[]) +{ + hid_t fid; /* File ID for file opened */ + long nrecords = 0; /* # of records to append */ + long flush_count = 10000; /* # of records to write between flushing file */ + hbool_t verbose = TRUE; /* Whether to emit some informational messages */ + FILE *verbose_file = NULL; /* File handle for verbose output */ + hbool_t old = FALSE; /* Whether to use non-latest-format when opening file */ + hbool_t use_seed = FALSE; /* Set to TRUE if a seed was set on the command line */ + unsigned random_seed = 0; /* Random # seed */ + unsigned u; /* Local index variable */ + int temp; + + /* Parse command line options */ + if(argc < 2) + usage(); + if(argc > 1) { + u = 1; + while(u < (unsigned)argc) { + if(argv[u][0] == '-') { + switch(argv[u][1]) { + /* # of records to write between flushing file */ + case 'f': + flush_count = HDatol(argv[u + 1]); + if(flush_count < 0) + usage(); + u += 2; + break; + + /* Be quiet */ + case 'q': + verbose = FALSE; + u++; + break; + + /* Random # seed */ + case 'r': + use_seed = TRUE; + temp = HDatoi(argv[u + 1]); + random_seed = (unsigned)temp; + u += 2; + break; + + /* Use non-latest-format when opening file */ + case 'o': + old = TRUE; + u++; + break; + + default: + usage(); + break; + } /* end switch */ + } /* end if */ + else { + /* Get the number of records to append */ + nrecords = HDatol(argv[u]); + if(nrecords <= 0) + usage(); + + u++; + } /* end else */ + } /* end while */ + } /* end if */ + if(nrecords <= 0) + usage(); + if(flush_count >= nrecords) + usage(); + + /* Set the random seed */ + if(!use_seed) { + struct timeval t; + + HDgettimeofday(&t, NULL); + random_seed = (unsigned)(t.tv_usec); + } /* end if */ + HDsrandom(random_seed); + + /* Open output file */ + if(verbose) { + char verbose_name[1024]; + + HDsnprintf(verbose_name, sizeof(verbose_name), "swmr_writer.out.%u", random_seed); + if(NULL == (verbose_file = HDfopen(verbose_name, "w"))) { + HDfprintf(stderr, "Can't open verbose output file!\n"); + HDexit(1); + } + } /* end if */ + + /* Emit informational message */ + if(verbose) { + HDfprintf(verbose_file, "Parameters:\n"); + HDfprintf(verbose_file, "\t# of records between flushes = %ld\n", flush_count); + HDfprintf(verbose_file, "\t# of records to write = %ld\n", nrecords); + } /* end if */ + + /* ALWAYS emit the random seed for possible debugging */ + HDfprintf(stdout, "Using writer random seed: %u\n", random_seed); + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Generating symbol names\n"); + + /* Generate dataset names */ + if(generate_symbols() < 0) + return -1; + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Opening skeleton file: %s\n", FILENAME); + + /* Open file skeleton */ + if((fid = open_skeleton(FILENAME, verbose, verbose_file, random_seed, old)) < 0) { + HDfprintf(stderr, "Error opening skeleton file!\n"); + HDexit(1); + } /* end if */ + + /* Send a message to indicate "H5Fopen" is complete--releasing the file lock */ + h5_send_message(WRITER_MESSAGE, NULL, NULL); + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Adding records\n"); + + /* Append records to datasets */ + if(add_records(fid, verbose, verbose_file, (unsigned long)nrecords, (unsigned long)flush_count) < 0) { + HDfprintf(stderr, "Error appending records to datasets!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Releasing symbols\n"); + + /* Clean up the symbols */ + if(shutdown_symbols() < 0) { + HDfprintf(stderr, "Error releasing symbols!\n"); + HDexit(1); + } /* end if */ + + /* Emit informational message */ + if(verbose) + HDfprintf(verbose_file, "Closing objects\n"); + + /* Close objects opened */ + if(H5Fclose(fid) < 0) { + HDfprintf(stderr, "Error closing file!\n"); + HDexit(1); + } /* end if */ + + return 0; +} + diff --git a/test/test_usecases.sh.in b/test/test_usecases.sh.in new file mode 100644 index 0000000..1cae191 --- /dev/null +++ b/test/test_usecases.sh.in @@ -0,0 +1,170 @@ +#! /bin/bash +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# +# Tests the use cases of swmr features. +# +# Created: +# Albert Cheng, 2013/06/01. +# Modified: +# + +# This is work in progress. +# For now, it shows how to run the test cases programs. It only verifies the +# exit codes are okay (0). + +srcdir=@srcdir@ + +# Check to see if the VFD specified by the HDF5_DRIVER environment variable +# supports SWMR. +./swmr_check_compat_vfd +rc=$? +if [[ $rc != 0 ]] ; then + echo + echo "The VFD specified by the HDF5_DRIVER environment variable" + echo "does not support SWMR" + echo + echo "SWMR use case tests skipped" + echo + exit 0 +fi + +# Define symbols +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_VALUE=$EXIT_SUCCESS # Default all tests succeed +RESULT_PASSED=" PASSED" +RESULT_FAILED="*FAILED*" +RESULT_SKIP="-SKIP-" +USECASES_PROGRAMS="use_append_chunk use_append_mchunks" +TESTNAME="Use Case" + +# Define variables +nerrors=0 +verbose=yes + +# Source in the output filter function definitions. +. $srcdir/../bin/output_filter.sh + +# Define functions +# Print a line-line message left justified in a field of 72 characters. +# Results can be " PASSED", "*FAILED*", "-SKIP-", up to 8 characters +# wide. +# SPACES should be at least 71 spaces. ($* + ' ' + 71 + 8 >= 80) +# +TESTING() { + SPACES=" " + echo "$* $SPACES" | cut -c1-72 | tr -d '\012' +} + +# Run a test and print PASS or *FAIL*. If a test fails then increment +# the `nerrors' global variable and (if $verbose is set) display the +# difference between the actual output and the expected output. The +# expected output is given as the first argument to this function and +# the actual output file is calculated by replacing the `.ddl' with +# `.out'. The actual output is not removed if $HDF5_NOCLEANUP has a +# non-zero value. +# ADD_H5_TEST +TOOLTEST() { + program=$1 + shift + + actual="$program.out" + actual_err="$program.err" + actual_sav=${actual}-sav + actual_err_sav=${actual_err}-sav + + # Run test. + TESTING $program $@ + ( + $RUNSERIAL ./$program "$@" + ) >$actual 2>$actual_err + exit_code=$? + + # save actual and actual_err in case they are needed later. + cp $actual $actual_sav + STDOUT_FILTER $actual + cp $actual_err $actual_err_sav + STDERR_FILTER $actual_err + cat $actual_err >> $actual + + if [ $exit_code -eq 0 ];then + echo "$RESULT_PASSED" + test yes = "$verbose" && sed 's/^/ /' < $actual + else + echo "$RESULT_FAILED" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && sed 's/^/ /' < $actual + fi + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext + fi +} + +# run tests for H5Odisable_mdc_flushes/H5Oenable_mdc_flushes/H5Oare_mdc_flushes_disabled here temporary +USECORK=use_disable_mdc_flushes +for p in $USECORK; do + TOOLTEST $p + TOOLTEST $p -y 3 + TOOLTEST $p -n 3000 + TOOLTEST $p -n 5000 +done + +# run write order test here temporary +WRITEORDER=twriteorder +for p in $WRITEORDER; do + TOOLTEST $p + TOOLTEST $p -b 1000 + TOOLTEST $p -p 3000 + TOOLTEST $p -n 2000 + TOOLTEST $p -l w + TOOLTEST $p -l r +done + +# Report test results +if test $nerrors -eq 0 ; then + echo "$WRITEORDER test passed." +else + echo "$WRITEORDER test failed with $nerrors errors." + EXIT_VALUE=$EXIT_FAILURE + nerrors=0 # reset nerror for the regular tests below. +fi + +# main body +for p in $USECASES_PROGRAMS; do + TOOLTEST ./$p + TOOLTEST ./$p -z 256 + tmpfile=/tmp/datatfile.$$ + TOOLTEST ./$p -f $tmpfile; rm -f $tmpfile + TOOLTEST ./$p -l w + TOOLTEST ./$p -l r + # use case 1.9, testing with multi-planes chunks + TOOLTEST ./$p -z 256 -y 5 # 5 planes chunks + # cleanup temp datafile + if test -z "$HDF5_NOCLEANUP"; then + rm -f $p.h5 + fi +done + + +# Report test results and exit +if test $nerrors -eq 0 ; then + echo "All $TESTNAME tests passed." +else + echo "$TESTNAME tests failed with $nerrors errors." + EXIT_VALUE=$EXIT_FAILURE +fi + +exit $EXIT_VALUE diff --git a/test/testswmr.sh.in b/test/testswmr.sh.in new file mode 100644 index 0000000..c4a75e8 --- /dev/null +++ b/test/testswmr.sh.in @@ -0,0 +1,529 @@ +#! /bin/bash +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# +# Tests for the swmr feature. +# +# Created: +# Albert Cheng, 2009/07/22 + +srcdir=@srcdir@ + +############################################################################### +## test parameters +############################################################################### + +Nreaders=5 # number of readers to launch +Nrdrs_spa=3 # number of sparse readers to launch +Nrecords=200000 # number of records to write +Nrecs_rem=40000 # number of times to shrink +Nrecs_spa=20000 # number of records to write in the sparse test +Nsecs_add=5 # number of seconds per read interval +Nsecs_rem=3 # number of seconds per read interval +Nsecs_addrem=8 # number of seconds per read interval +nerrors=0 + +############################################################################### +## definitions for message file to coordinate test runs +############################################################################### +WRITER_MESSAGE=SWMR_WRITER_MESSAGE # The message file created by writer that the open is complete + # This should be the same as the define in "./swmr_common.h" +MESSAGE_TIMEOUT=300 # Message timeout length in secs + # This should be the same as the define in "./h5test.h" + +############################################################################### +## short hands and function definitions +############################################################################### +DPRINT=: # Set to "echo Debug:" for debugging printing, + # else ":" for noop. +IFDEBUG=: # Set to null to turn on debugging, else ":" for noop. + +# Print a line-line message left justified in a field of 70 characters +# beginning with the word "Testing". +# +TESTING() { + SPACES=" " + echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012' +} + +# To wait for the writer message file or till the maximum # of seconds is reached +# $1 is the message file to wait for +# This performs similar function as the routine h5_wait_message() in test/h5test.c +WAIT_MESSAGE() { + message=$1 # Get the name of the message file to wait for + t0=`date +%s` # Get current time in seconds + difft=0 # Initialize the time difference + mexist=0 # Indicate whether the message file is found + while [ $difft -lt $MESSAGE_TIMEOUT ] ; # Loop till message times out + do + t1=`date +%s` # Get current time in seconds + difft=`expr $t1 - $t0` # Calculate the time difference + if [ -e $message ]; then # If message file is found: + mexist=1 # indicate the message file is found + rm $message # remove the message file + break # get out of the while loop + fi + done; + if test $mexist -eq 0; then + # Issue warning that the writer message file is not found, continue with launching the reader(s) + echo warning: $WRITER_MESSAGE is not found after waiting $MESSAGE_TIMEOUT seconds + else + echo $WRITER_MESSAGE is found + fi +} + +############################################################################### +## Main +## +## Modifications: +## Vailin Choi; July 2013 +## Add waiting of message file before launching the reader(s). +## Due to the implementation of file locking, coordination +## is needed in file opening for the writer/reader tests +## to proceed as expected. +## +############################################################################### +# The build (current) directory might be different than the source directory. +if test -z "$srcdir"; then + srcdir=. +fi + +# Check to see if the VFD specified by the HDF5_DRIVER environment variable +# supports SWMR. +./swmr_check_compat_vfd +rc=$? +if [ $rc -ne 0 ] ; then + echo + echo "The VFD specified by the HDF5_DRIVER environment variable" + echo "does not support SWMR." + echo + echo "SWMR acceptance tests skipped" + echo + exit 0 +fi + +# Parse options (none accepted at this time) +while [ $# -gt 0 ]; do + case "$1" in + *) # unknown option + echo "$0: Unknown option ($1)" + exit 1 + ;; + esac +done + +# Loop over index types +for index_type in "-i ea" "-i b2" +do + # Try with and without compression + for compress in "" "-c 5" + do + echo + echo "*******************************************************************************" + echo "** Loop testing parameters: $index_type $compress" + echo "*******************************************************************************" + echo + echo + echo "###############################################################################" + echo "## Generator test" + echo "###############################################################################" + # Launch the Generator without SWMR_WRITE + echo launch the swmr_generator + ./swmr_generator $compress $index_type + if test $? -ne 0; then + echo generator had error + nerrors=`expr $nerrors + 1` + fi + + # Launch the Generator with SWMR_WRITE + echo launch the swmr_generator with SWMR_WRITE + ./swmr_generator -s $compress $index_type + if test $? -ne 0; then + echo generator had error + nerrors=`expr $nerrors + 1` + fi + + # Check for error and exit if one occured + $DPRINT nerrors=$nerrors + if test $nerrors -ne 0 ; then + echo "SWMR tests failed with $nerrors errors." + exit 1 + fi + + echo + echo "###############################################################################" + echo "## Use H5Fstart_swmr_write() to enable SWMR writing mode" + echo "###############################################################################" + + # Remove any possible writer message file before launching writer + rm -f $WRITER_MESSAGE + # + # Launch the Writer + echo launch the swmr_start_writer + seed="" # Put -r <random seed> command here + ./swmr_start_write $compress $index_type $Nrecords $seed 2>&1 |tee swmr_writer.out & + pid_writer=$! + $DPRINT pid_writer=$pid_writer + + # Wait for message from writer process before starting reader(s) + WAIT_MESSAGE $WRITER_MESSAGE + + # + # Launch the Readers + #declare -a seeds=(<seed1> <seed2> <seed3> ... ) + echo launch $Nreaders swmr_readers + pid_readers="" + n=0 + while [ $n -lt $Nreaders ]; do + #seed="-r ${seeds[$n]}" + seed="" + ./swmr_reader $Nsecs_add $seed 2>&1 |tee swmr_reader.out.$n & + pid_readers="$pid_readers $!" + n=`expr $n + 1` + done + $DPRINT pid_readers=$pid_readers + $IFDEBUG ps + + # Collect exit code of the readers first because they usually finish + # before the writer. + for xpid in $pid_readers; do + $DPRINT checked reader $xpid + wait $xpid + if test $? -ne 0; then + echo reader had error + nerrors=`expr $nerrors + 1` + fi + done + + # Collect exit code of the writer + $DPRINT checked writer $pid_writer + wait $pid_writer + if test $? -ne 0; then + echo writer had error + nerrors=`expr $nerrors + 1` + fi + + # Check for error and exit if one occured + $DPRINT nerrors=$nerrors + if test $nerrors -ne 0 ; then + echo "SWMR tests failed with $nerrors errors." + echo "(Writer and reader output preserved)" + exit 1 + fi + + # Clean up output files + rm -f swmr_writer.out + rm -f swmr_reader.out.* + + echo + echo "###############################################################################" + echo "## Writer test - test expanding the dataset" + echo "###############################################################################" + + # Launch the Generator + echo launch the swmr_generator + ./swmr_generator -s $compress $index_type + if test $? -ne 0; then + echo generator had error + nerrors=`expr $nerrors + 1` + fi + + # Remove any possible writer message file before launching writer + rm -f $WRITER_MESSAGE + # + # Launch the Writer + echo launch the swmr_writer + seed="" # Put -r <random seed> command here + ./swmr_writer -o $Nrecords $seed 2>&1 |tee swmr_writer.out & + pid_writer=$! + $DPRINT pid_writer=$pid_writer + + # Wait for message from writer process before starting reader(s) + WAIT_MESSAGE $WRITER_MESSAGE + # + # Launch the Readers + #declare -a seeds=(<seed1> <seed2> <seed3> ... ) + echo launch $Nreaders swmr_readers + pid_readers="" + n=0 + while [ $n -lt $Nreaders ]; do + #seed="-r ${seeds[$n]}" + seed="" + ./swmr_reader $Nsecs_add $seed 2>&1 |tee swmr_reader.out.$n & + pid_readers="$pid_readers $!" + n=`expr $n + 1` + done + $DPRINT pid_readers=$pid_readers + $IFDEBUG ps + + # Collect exit code of the readers first because they usually finish + # before the writer. + for xpid in $pid_readers; do + $DPRINT checked reader $xpid + wait $xpid + if test $? -ne 0; then + echo reader had error + nerrors=`expr $nerrors + 1` + fi + done + + # Collect exit code of the writer + $DPRINT checked writer $pid_writer + wait $pid_writer + if test $? -ne 0; then + echo writer had error + nerrors=`expr $nerrors + 1` + fi + + # Check for error and exit if one occured + $DPRINT nerrors=$nerrors + if test $nerrors -ne 0 ; then + echo "SWMR tests failed with $nerrors errors." + echo "(Writer and reader output preserved)" + exit 1 + fi + + # Clean up output files + rm -f swmr_writer.out + rm -f swmr_reader.out.* + + echo + echo "###############################################################################" + echo "## Remove test - test shrinking the dataset" + echo "###############################################################################" + + # Remove any possible writer message file before launching writer + rm -f $WRITER_MESSAGE + # Launch the Remove Writer + echo launch the swmr_remove_writer + seed="" # Put -r <random seed> command here + ./swmr_remove_writer -o $Nrecs_rem $seed 2>&1 |tee swmr_writer.out & + pid_writer=$! + $DPRINT pid_writer=$pid_writer + + # Wait for message from writer process before starting reader(s) + WAIT_MESSAGE $WRITER_MESSAGE + # + # Launch the Remove Readers + #declare -a seeds=(<seed1> <seed2> <seed3> ... ) + n=0 + pid_readers="" + echo launch $Nreaders swmr_remove_readers + while [ $n -lt $Nreaders ]; do + #seed="-r ${seeds[$n]}" + seed="" + ./swmr_remove_reader $Nsecs_rem $seed 2>&1 |tee swmr_reader.out.$n & + pid_readers="$pid_readers $!" + n=`expr $n + 1` + done + $DPRINT pid_readers=$pid_readers + $IFDEBUG ps + + # Collect exit code of the readers first because they usually finish + # before the writer. + for xpid in $pid_readers; do + $DPRINT checked reader $xpid + wait $xpid + if test $? -ne 0; then + echo reader had error + nerrors=`expr $nerrors + 1` + fi + done + + # Collect exit code of the writer + $DPRINT checked writer $pid_writer + wait $pid_writer + if test $? -ne 0; then + echo writer had error + nerrors=`expr $nerrors + 1` + fi + + # Check for error and exit if one occured + $DPRINT nerrors=$nerrors + if test $nerrors -ne 0 ; then + echo "SWMR tests failed with $nerrors errors." + echo "(Writer and reader output preserved)" + exit 1 + fi + + # Clean up output files + rm -f swmr_writer.out + rm -f swmr_reader.out.* + + echo + echo "###############################################################################" + echo "## Add/remove test - randomly grow or shrink the dataset" + echo "###############################################################################" + + # Launch the Generator + echo launch the swmr_generator + ./swmr_generator $compress $index_type + if test $? -ne 0; then + echo generator had error + nerrors=`expr $nerrors + 1` + fi + + # Launch the Writer (not in parallel - just to rebuild the datasets) + echo launch the swmr_writer + seed="" # Put -r <random seed> command here + ./swmr_writer $Nrecords $seed + if test $? -ne 0; then + echo writer had error + nerrors=`expr $nerrors + 1` + fi + + # Remove any possible writer message file before launching writer + rm -f $WRITER_MESSAGE + # + # Launch the Add/Remove Writer + echo launch the swmr_addrem_writer + seed="" # Put -r <random seed> command here + ./swmr_addrem_writer $Nrecords $seed 2>&1 |tee swmr_writer.out & + pid_writer=$! + $DPRINT pid_writer=$pid_writer + + # Wait for message from writer process before starting reader(s) + WAIT_MESSAGE $WRITER_MESSAGE + # + # Launch the Add/Remove Readers + #declare -a seeds=(<seed1> <seed2> <seed3> ... ) + n=0 + pid_readers="" + echo launch $Nreaders swmr_remove_readers + while [ $n -lt $Nreaders ]; do + #seed="-r ${seeds[$n]}" + seed="" + ./swmr_remove_reader $Nsecs_addrem $seed 2>&1 |tee swmr_reader.out.$n & + pid_readers="$pid_readers $!" + n=`expr $n + 1` + done + $DPRINT pid_readers=$pid_readers + $IFDEBUG ps + + # Collect exit code of the readers first because they usually finish + # before the writer. + for xpid in $pid_readers; do + $DPRINT checked reader $xpid + wait $xpid + if test $? -ne 0; then + echo reader had error + nerrors=`expr $nerrors + 1` + fi + done + + # Collect exit code of the writer + $DPRINT checked writer $pid_writer + wait $pid_writer + if test $? -ne 0; then + echo writer had error + nerrors=`expr $nerrors + 1` + fi + + # Check for error and exit if one occured + $DPRINT nerrors=$nerrors + if test $nerrors -ne 0 ; then + echo "SWMR tests failed with $nerrors errors." + echo "(Writer and reader output preserved)" + exit 1 + fi + + # Clean up output files + rm -f swmr_writer.out + rm -f swmr_reader.out.* + + echo + echo "###############################################################################" + echo "## Sparse writer test - test writing to random locations in the dataset" + echo "###############################################################################" + + # Launch the Generator + # NOTE: Random seed is shared between readers and writers and is + # created by the generator. + echo launch the swmr_generator + seed="" # Put -r <random seed> command here + ./swmr_generator $compress $index_type $seed + if test $? -ne 0; then + echo generator had error + nerrors=`expr $nerrors + 1` + fi + + # Remove any possible writer message file before launching writer + rm -f $WRITER_MESSAGE + # Launch the Sparse writer + echo launch the swmr_sparse_writer + nice -n 20 ./swmr_sparse_writer $Nrecs_spa 2>&1 |tee swmr_writer.out & + pid_writer=$! + $DPRINT pid_writer=$pid_writer + + # Wait for message from writer process before starting reader(s) + WAIT_MESSAGE $WRITER_MESSAGE + # + # Launch the Sparse readers + n=0 + pid_readers="" + echo launch $Nrdrs_spa swmr_sparse_readers + while [ $n -lt $Nrdrs_spa ]; do + # The sparse reader spits out a LOT of data so it's set to 'quiet' + ./swmr_sparse_reader -q $Nrecs_spa 2>&1 |tee swmr_reader.out.$n & + pid_readers="$pid_readers $!" + n=`expr $n + 1` + done + $DPRINT pid_readers=$pid_readers + $IFDEBUG ps + + # Collect exit code of the writer + $DPRINT checked writer $pid_writer + wait $pid_writer + if test $? -ne 0; then + echo writer had error + nerrors=`expr $nerrors + 1` + fi + + # Collect exit code of the readers + for xpid in $pid_readers; do + $DPRINT checked reader $xpid + wait $xpid + if test $? -ne 0; then + echo reader had error + nerrors=`expr $nerrors + 1` + fi + done + + # Check for error and exit if one occured + $DPRINT nerrors=$nerrors + if test $nerrors -ne 0 ; then + echo "SWMR tests failed with $nerrors errors." + echo "(Writer and reader output preserved)" + exit 1 + fi + + # Clean up output files + rm -f swmr_writer.out + rm -f swmr_reader.out.* + done +done + +############################################################################### +## Report and exit +############################################################################### + +$DPRINT nerrors=$nerrors +if test $nerrors -eq 0 ; then + echo "SWMR tests passed." + exit 0 +else + echo "SWMR tests failed with $nerrors errors." + exit 1 +fi + diff --git a/test/testvdsswmr.sh.in b/test/testvdsswmr.sh.in new file mode 100644 index 0000000..d69b8c0 --- /dev/null +++ b/test/testvdsswmr.sh.in @@ -0,0 +1,199 @@ +#! /bin/bash +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# +# Tests for the swmr feature using virtual datasets. +# +# Created: +# Dana Robinson, November 2015 + +srcdir=@srcdir@ + +############################################################################### +## test parameters +############################################################################### + +Nwriters=6 # number of writers (1 per source dataset) +Nreaders=5 # number of readers to launch +nerrors=0 + +############################################################################### +## definitions for message file to coordinate test runs +############################################################################### +WRITER_MESSAGE=SWMR_WRITER_MESSAGE # The message file created by writer that the open is complete + # This should be the same as the define in "./swmr_common.h" +MESSAGE_TIMEOUT=300 # Message timeout length in secs + # This should be the same as the define in "./h5test.h" + +############################################################################### +## short hands and function definitions +############################################################################### +DPRINT=: # Set to "echo Debug:" for debugging printing, + # else ":" for noop. +IFDEBUG=: # Set to null to turn on debugging, else ":" for noop. + +# Print a line-line message left justified in a field of 70 characters +# beginning with the word "Testing". +# +TESTING() { + SPACES=" " + echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012' +} + +# To wait for the writer message file or till the maximum # of seconds is reached +# $1 is the message file to wait for +# This performs similar function as the routine h5_wait_message() in test/h5test.c +WAIT_MESSAGE() { + message=$1 # Get the name of the message file to wait for + t0=`date +%s` # Get current time in seconds + difft=0 # Initialize the time difference + mexist=0 # Indicate whether the message file is found + while [ $difft -lt $MESSAGE_TIMEOUT ] ; # Loop till message times out + do + t1=`date +%s` # Get current time in seconds + difft=`expr $t1 - $t0` # Calculate the time difference + if [ -e $message ]; then # If message file is found: + mexist=1 # indicate the message file is found + rm $message # remove the message file + break # get out of the while loop + fi + done; + if test $mexist -eq 0; then + # Issue warning that the writer message file is not found, continue with launching the reader(s) + echo warning: $WRITER_MESSAGE is not found after waiting $MESSAGE_TIMEOUT seconds + else + echo $WRITER_MESSAGE is found + fi +} + +############################################################################### +## Main +############################################################################### +# The build (current) directory might be different than the source directory. +if test -z "$srcdir"; then + srcdir=. +fi + +# Check to see if the VFD specified by the HDF5_DRIVER environment variable +# supports SWMR. +./swmr_check_compat_vfd +rc=$? +if [ $rc -ne 0 ] ; then + echo + echo "The VFD specified by the HDF5_DRIVER environment variable" + echo "does not support SWMR." + echo + echo "SWMR acceptance tests skipped" + echo + exit 0 +fi + +# Parse options (none accepted at this time) +while [ $# -gt 0 ]; do + case "$1" in + *) # unknown option + echo "$0: Unknown option ($1)" + exit 1 + ;; + esac +done + +echo +echo "###############################################################################" +echo "## Basic VDS SWMR test - writing to a tiled plane" +echo "###############################################################################" + +# Launch the file generator +echo launch the generator +./vds_swmr_gen +if test $? -ne 0; then + echo generator had error + nerrors=`expr $nerrors + 1` +fi + +# Check for error and exit if one occured +$DPRINT nerrors=$nerrors +if test $nerrors -ne 0 ; then + echo "VDS SWMR tests failed with $nerrors errors." + exit 1 +fi + +# Launch the writers +echo "launch the $Nwriters SWMR VDS writers (1 per source)" +pid_writers="" +n=0 +while [ $n -lt $Nwriters ]; do + ./vds_swmr_writer $n & + pid_writers="$pid_writers $!" + n=`expr $n + 1` +done +$DPRINT pid_writers=$pid_writers +$IFDEBUG ps + +# Sleep to ensure that the writers have started +sleep 3 + +# Launch the readers +echo launch $Nreaders SWMR readers +pid_readers="" +n=0 +while [ $n -lt $Nreaders ]; do + ./vds_swmr_reader & + pid_readers="$pid_readers $!" + n=`expr $n + 1` +done +$DPRINT pid_readers=$pid_readers +$IFDEBUG ps + +# Collect exit code of the writers +for xpid in $pid_writers; do + $DPRINT checked writer $xpid + wait $xpid + if test $? -ne 0; then + echo writer had error + nerrors=`expr $nerrors + 1` + fi +done + +# Collect exit code of the readers +# (they usually finish after the writers) +for xpid in $pid_readers; do + $DPRINT checked reader $xpid + wait $xpid + if test $? -ne 0; then + echo reader had error + nerrors=`expr $nerrors + 1` + fi +done + +# Check for error and exit if one occured +$DPRINT nerrors=$nerrors +if test $nerrors -ne 0 ; then + echo "VDS SWMR tests failed with $nerrors errors." + exit 1 +fi + +############################################################################### +## Report and exit +############################################################################### + +$DPRINT nerrors=$nerrors +if test $nerrors -eq 0 ; then + echo "VDS SWMR tests passed." + exit 0 +else + echo "VDS SWMR tests failed with $nerrors errors." + exit 1 +fi + diff --git a/test/twriteorder.c b/test/twriteorder.c new file mode 100644 index 0000000..58690f6 --- /dev/null +++ b/test/twriteorder.c @@ -0,0 +1,463 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/*********************************************************** +* +* Test program: twriteorder +* +* Test to verify that the write order is strictly consistent. +* The SWMR feature requires that the order of write is strictly consistent. +* "Strict consistency in computer science is the most stringent consistency +* model. It says that a read operation has to return the result of the +* latest write operation which occurred on that data item."-- +* (http://en.wikipedia.org/wiki/Linearizability#Definition_of_linearizability). +* This is also an alternative form of what POSIX write require that after a +* write operation has returned success, all reads issued afterward should +* get the same data the write has written. +* +* Created: Albert Cheng, 2013/8/28. +* Modified: +*************************************************************/ + +/*********************************************************** +* +* Algorithm +* +* The test simulates what SWMR does by writing chained blocks and see if +* they can be read back correctly. +* There is a writer process and multiple read processes. +* The file is divided into 2KB partitions. Then writer writes 1 chained +* block, each of 1KB big, in each partition after the first partition. +* Each chained block has this structure: +* Byte 0-3: offset address of its child block. The last child uses 0 as NULL. +* Byte 4-1023: some artificial data. +* The child block address of Block 1 is NULL (0). +* The child block address of Block 2 is the offset address of Block 1. +* The child block address of Block n is the offset address of Block n-1. +* After all n blocks are written, the offset address of Block n is written +* to the offset 0 of the first partition. +* Therefore, by the time the offset address of Block n is written to this +* position, all n chain-linked blocks have been written. +* +* The other reader processes will try to read the address value at the +* offset 0. The value is initially NULL(0). When it changes to non-zero, +* it signifies the writer process has written all the chain-link blocks +* and they are ready for the reader processes to access. +* +* If the system, in which the writer and reader processes run, the readers +* will always get all chain-linked blocks correctly. If the order of write +* is not maintained, some reader processes may found unexpect block data. +* +*************************************************************/ + +#include "h5test.h" + +/* This test uses many POSIX things that are not available on + * Windows. We're using a check for fork(2) here as a proxy for + * all POSIX/Unix/Linux things until this test can be made + * more platform-independent. + */ +#ifdef H5_HAVE_FORK + +#define DATAFILE "twriteorder.dat" +/* #define READERS_MAX 10 */ /* max number of readers */ +#define BLOCKSIZE_DFT 1024 /* 1KB */ +#define PARTITION_DFT 2048 /* 2KB */ +#define NLINKEDBLOCKS_DFT 512 /* default 512 */ +#define SIZE_BLKADDR 4 /* expected sizeof blkaddr */ +#define Hgoto_error(val) {ret_value=val; goto done;} + +/* type declarations */ +typedef enum part_t { + UC_READWRITE =0, /* both writer and reader */ + UC_WRITER, /* writer only */ + UC_READER /* reader only */ +} part_t; + +/* prototypes */ +int create_wo_file(void); +int write_wo_file(void); +int read_wo_file(void); +void usage(const char *prog); +int setup_parameters(int argc, char * const argv[]); +int parse_option(int argc, char * const argv[]); + +/* Global Variable definitions */ +const char *progname_g="twriteorder"; /* program name */ +int write_fd_g; +int blocksize_g, part_size_g, nlinkedblock_g; +part_t launch_g; + +/* Function definitions */ + +/* Show help page */ +void +usage(const char *prog) +{ + fprintf(stderr, "usage: %s [OPTIONS]\n", prog); + fprintf(stderr, " OPTIONS\n"); + fprintf(stderr, " -h Print a usage message and exit\n"); + fprintf(stderr, " -l w|r launch writer or reader only. [default: launch both]\n"); + fprintf(stderr, " -b N Block size [default: %d]\n", BLOCKSIZE_DFT); + fprintf(stderr, " -p N Partition size [default: %d]\n", PARTITION_DFT); + fprintf(stderr, " -n N Number of linked blocks [default: %d]\n", NLINKEDBLOCKS_DFT); + fprintf(stderr, " where N is an integer value\n"); + fprintf(stderr, "\n"); +} + +/* Setup test parameters by parsing command line options. + * Setup default values if not set by options. */ +int +parse_option(int argc, char * const argv[]) +{ + int ret_value=0; + int c; + /* command line options: See function usage for a description */ + const char *cmd_options = "hb:l:n:p:"; + + /* suppress getopt from printing error */ + opterr = 0; + + while (1){ + c = getopt (argc, argv, cmd_options); + if (-1 == c) + break; + switch (c) { + case 'h': + usage(progname_g); + exit(0); + break; + case 'b': /* number of planes to write/read */ + if ((blocksize_g = atoi(optarg)) <= 0){ + fprintf(stderr, "bad blocksize %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'n': /* number of planes to write/read */ + if ((nlinkedblock_g = atoi(optarg)) < 2){ + fprintf(stderr, "bad number of linked blocks %s, must be greater than 1.\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'p': /* number of planes to write/read */ + if ((part_size_g = atoi(optarg)) <= 0){ + fprintf(stderr, "bad partition size %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'l': /* launch reader or writer only */ + switch (*optarg) { + case 'r': /* reader only */ + launch_g = UC_READER; + break; + case 'w': /* writer only */ + launch_g = UC_WRITER; + break; + default: + fprintf(stderr, "launch value(%c) should be w or r only.\n", *optarg); + usage(progname_g); + Hgoto_error(-1); + break; + } + printf("launch = %d\n", launch_g); + break; + case '?': + fprintf(stderr, "getopt returned '%c'.\n", c); + usage(progname_g); + Hgoto_error(-1); + default: + fprintf(stderr, "getopt returned unexpected value.\n"); + fprintf(stderr, "Unexpected value is %d\n", c); + Hgoto_error(-1); + } + } + + /* verify partition size must be >= blocksize */ + if (part_size_g < blocksize_g ){ + fprintf(stderr, "Blocksize %d should not be bigger than partition size %d\n", + blocksize_g, part_size_g); + Hgoto_error(-1); + } + +done: + /* All done. */ + return(ret_value); +} + +/* Setup parameters for the test case. + * Return: 0 succeed; -1 fail. + */ +int setup_parameters(int argc, char * const argv[]) +{ + /* test case defaults */ + blocksize_g = BLOCKSIZE_DFT; + part_size_g = PARTITION_DFT; + nlinkedblock_g = NLINKEDBLOCKS_DFT; + launch_g = UC_READWRITE; + + /* parse options */ + if (parse_option(argc, argv) < 0){ + return(-1); + } + + /* show parameters and return */ + printf("blocksize = %ld\n", (long)blocksize_g); + printf("part_size = %ld\n", (long)part_size_g); + printf("nlinkedblock = %ld\n", (long)nlinkedblock_g); + printf("launch = %d\n", launch_g); + return(0); +} + +/* Create the test file with initial "empty" file, that is, + * partition 0 has a null (0) address. + * + * Return: 0 succeed; -1 fail. + */ +int create_wo_file(void) +{ + int blkaddr=0; /* blkaddress of next linked block */ + int ret_code; + + /* Create the data file */ + if ((write_fd_g = HDopen(DATAFILE, O_RDWR|O_TRUNC|O_CREAT, 0664)) < 0) { + printf("WRITER: error from open\n"); + return -1; + } + blkaddr=0; + /* write it to partition 0 */ + if ((ret_code=HDwrite(write_fd_g, &blkaddr, (size_t)SIZE_BLKADDR)) != SIZE_BLKADDR){ + printf("blkaddr write failed\n"); + return -1; + } + + /* File initialized, return success */ + return 0; +} + +int write_wo_file(void) +{ + int blkaddr; + int blkaddr_old=0; + int i; + char buffer[BLOCKSIZE_DFT]; + int ret_code; + + + /* write block 1, 2, ... */ + for (i=1; i<nlinkedblock_g; i++){ + /* calculate where to write this block */ + blkaddr = i*part_size_g + i; + /* store old block address in byte 0-3 */ + HDmemcpy(&buffer[0], &blkaddr_old, sizeof(blkaddr_old)); + /* fill the rest with the lowest byte of i */ + HDmemset(&buffer[4], i & 0xff, (size_t) (BLOCKSIZE_DFT-4)); + /* write the block */ +#ifdef DEBUG + printf("writing block at %d\n", blkaddr); +#endif + HDlseek(write_fd_g, (HDoff_t)blkaddr, SEEK_SET); + if ((ret_code=HDwrite(write_fd_g, buffer, (size_t)blocksize_g)) != blocksize_g){ + printf("blkaddr write failed in partition %d\n", i); + return -1; + } + blkaddr_old = blkaddr; + } + /* write the last blkaddr in partition 0 */ + HDlseek(write_fd_g, (HDoff_t)0, SEEK_SET); + if ((ret_code=HDwrite(write_fd_g, &blkaddr_old, (size_t)sizeof(blkaddr_old))) != sizeof(blkaddr_old)){ + printf("blkaddr write failed in partition %d\n", 0); + return -1; + } + + /* all writes done. return succeess. */ +#ifdef DEBUG + printf("wrote %d blocks\n", nlinkedblock_g); +#endif + return 0; +} + +int read_wo_file(void) +{ + int read_fd; + int blkaddr=0; + int ret_code; + int linkedblocks_read=0; + char buffer[BLOCKSIZE_DFT]; + + /* Open the data file */ + if ((read_fd = HDopen(DATAFILE, O_RDONLY, 0)) < 0) { + printf("READER: error from open\n"); + return -1; + } + /* keep reading the initial block address until it is non-zero before proceeding. */ + while (blkaddr == 0){ + HDlseek(read_fd, (HDoff_t)0, SEEK_SET); + if ((ret_code=HDread(read_fd, &blkaddr, (size_t)sizeof(blkaddr))) != sizeof(blkaddr)){ + printf("blkaddr read failed in partition %d\n", 0); + return -1; + } + } + linkedblocks_read++; + + /* got a non-zero blkaddr. Proceed down the linked blocks. */ +#ifdef DEBUG + printf("got initial block address=%d\n", blkaddr); +#endif + while (blkaddr != 0){ + HDlseek(read_fd, (HDoff_t)blkaddr, SEEK_SET); + if ((ret_code=HDread(read_fd, buffer, (size_t)blocksize_g)) != blocksize_g){ + printf("blkaddr read failed in partition %d\n", 0); + return -1; + } + linkedblocks_read++; + /* retrieve the block address in byte 0-3 */ + HDmemcpy(&blkaddr, &buffer[0], sizeof(blkaddr)); +#ifdef DEBUG + printf("got next block address=%d\n", blkaddr); +#endif + } + +#ifdef DEBUG + printf("read %d blocks\n", linkedblocks_read); +#endif + return 0; +} + + +/* Overall Algorithm: + * Parse options from user; + * Generate/pre-created the test file needed and close it; + * fork: child processes become the reader processes; + * while parent process continues as the writer process; + * both run till ending conditions are met. + */ +int +main(int argc, char *argv[]) +{ + /*pid_t childpid[READERS_MAX]; + int child_ret_value[READERS_MAX];*/ + pid_t childpid=0; + int child_ret_value; + pid_t mypid, tmppid; + int child_status; + int child_wait_option=0; + int ret_value = 0; + + /* initialization */ + if (setup_parameters(argc, argv) < 0){ + Hgoto_error(1); + } + + /* ==============================================================*/ + /* UC_READWRITE: create datafile, launch both reader and writer. */ + /* UC_WRITER: create datafile, skip reader, launch writer. */ + /* UC_READER: skip create, launch reader, exit. */ + /* ==============================================================*/ + /* ============*/ + /* Create file */ + /* ============*/ + if (launch_g != UC_READER){ + printf("Creating skeleton data file for test...\n"); + if (create_wo_file() < 0){ + fprintf(stderr, "***encounter error\n"); + Hgoto_error(1); + }else + printf("File created.\n"); + } + /* flush output before possible fork */ + HDfflush(stdout); + + if (launch_g==UC_READWRITE){ + /* fork process */ + if((childpid = fork()) < 0) { + perror("fork"); + Hgoto_error(1); + }; + }; + mypid = getpid(); + + /* ============= */ + /* launch reader */ + /* ============= */ + if (launch_g != UC_WRITER){ + /* child process launch the reader */ + if(0 == childpid) { + printf("%d: launch reader process\n", mypid); + if (read_wo_file() < 0){ + fprintf(stderr, "read_wo_file encountered error\n"); + exit(1); + } + /* Reader is done. Clean up by removing the data file */ + HDremove(DATAFILE); + exit(0); + } + } + + /* ============= */ + /* launch writer */ + /* ============= */ + /* this process continues to launch the writer */ +#ifdef DEBUG + printf("%d: continue as the writer process\n", mypid); +#endif + if (write_wo_file() < 0){ + fprintf(stderr, "write_wo_file encountered error\n"); + Hgoto_error(1); + } + + /* ================================================ */ + /* If readwrite, collect exit code of child process */ + /* ================================================ */ + if (launch_g == UC_READWRITE){ + if ((tmppid = waitpid(childpid, &child_status, child_wait_option)) < 0){ + perror("waitpid"); + Hgoto_error(1); + } + if (WIFEXITED(child_status)){ + if ((child_ret_value=WEXITSTATUS(child_status)) != 0){ + printf("%d: child process exited with non-zero code (%d)\n", + mypid, child_ret_value); + Hgoto_error(2); + } + } else { + printf("%d: child process terminated abnormally\n", mypid); + Hgoto_error(2); + } + } + +done: + /* Print result and exit */ + if (ret_value != 0){ + printf("Error(s) encountered\n"); + }else{ + printf("All passed\n"); + } + + return(ret_value); +} + +#else /* H5_HAVE_FORK */ + +int +main(void) +{ + HDfprintf(stderr, "Non-POSIX platform. Skipping.\n"); + return EXIT_SUCCESS; +} /* end main() */ + +#endif /* H5_HAVE_FORK */ + diff --git a/test/use.h b/test/use.h new file mode 100644 index 0000000..dce79a0 --- /dev/null +++ b/test/use.h @@ -0,0 +1,64 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* + * Use Case Header file: common definitions for use cases tests. + */ +#include "h5test.h" + +/* Macro definitions */ +#define Hgoto_error(val) {ret_value=val; goto done;} +#define Hgoto_done {goto done;} +#define Chunksize_DFT 256 /* chunksize default */ +#define ErrorReportMax 10 /* max number of errors reported */ +/* these two definitions must match each other */ +#define UC_DATATYPE H5T_NATIVE_SHORT /* use case HDF5 data type */ +#define UC_CTYPE short /* use case C data type */ +#define UC_RANK 3 /* use case dataset rank */ + +/* Name of message file that is sent by the writer */ +#define WRITER_MESSAGE "USE_WRITER_MESSAGE" + +/* type declarations */ +typedef enum part_t { + UC_READWRITE =0, /* both writer and reader */ + UC_WRITER, /* writer only */ + UC_READER /* reader only */ +} part_t; +typedef struct options_t { + int chunksize; /* chunks are chunksize^2 planes */ + int chunkplanes; /* number of planes per chunk, default 1 */ + hsize_t chunkdims[UC_RANK]; /* chunk dims is (chunkplan, chunksize, chunksize) */ + hsize_t dims[UC_RANK]; /* dataset initial dims */ + hsize_t max_dims[UC_RANK]; /* dataset max dims */ + hsize_t nplanes; /* number of planes to write, default proportional to chunksize */ + char *filename; /* use case data filename */ + part_t launch; /* launch writer, reader or both */ + int use_swmr; /* use swmr open (1) or not */ + int iterations; /* iterations, default 1 */ +} options_t; + +/* global variables declarations */ +extern options_t UC_opts; /* Use Case Options */ +extern const char *progname_g; /* Program name */ + +/* prototype declarations */ +int parse_option(int argc, char * const argv[]); +int setup_parameters(int argc, char * const argv[]); +void show_parameters(void); +void usage(const char *prog); +int create_uc_file(void); +int write_uc_file(hbool_t tosend); +int read_uc_file(hbool_t towait); + diff --git a/test/use_append_chunk.c b/test/use_append_chunk.c new file mode 100644 index 0000000..1dd76c9 --- /dev/null +++ b/test/use_append_chunk.c @@ -0,0 +1,233 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Use Case 1.7 Appending a single chunk + * Description: + * Appending a single chunk of raw data to a dataset along an unlimited + * dimension within a pre-created file and reading the new data back. + * Goal: + * Read data appended by the Writer to a pre-existing dataset in a + * file. The dataset has one or more unlimited dimensions. The data is + * appended by a hyperslab that is contained in one chunk (for example, + * appending 2-dim planes along the slowest changing dimension in the + * 3-dim dataset). + * Level: + * User Level + * Guarantees: + * o Readers will see the modified dimension sizes after the Writer + * finishes HDF5 metadata updates and issues H5Fflush or H5Oflush calls. + * o Readers will see newly appended data after the Writer finishes + * the flush operation. + * + * Preconditions: + * o Readers are not allowed to modify the file. o All datasets + * that are modified by the Writer exist when the Writer opens the file. + * o All datasets that are modified by the Writer exist when a Reader + * opens the file. o Data is written by a hyperslab contained in + * one chunk. + * + * Main Success Scenario: + * 1. An application creates a file with required objects (groups, + * datasets, and attributes). + * 2. The Writer application opens the file and datasets in the file + * and starts adding data along the unlimited dimension using a hyperslab + * selection that corresponds to an HDF5 chunk. + * 3. A Reader opens the file and a dataset in a file, and queries + * the sizes of the dataset; if the extent of the dataset has changed, + * reads the appended data back. + * + * Discussion points: + * 1. Since the new data is written to the file, and metadata update + * operation of adding pointer to the newly written chunk is atomic and + * happens after the chunk is on the disk, only two things may happen + * to the Reader: + * o The Reader will not see new data. + * o The Reader will see all new data written by Writer. + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* Created: Albert Cheng, 2013/5/28 */ + +#include "h5test.h" + +/* This test uses many POSIX things that are not available on + * Windows. We're using a check for fork(2) here as a proxy for + * all POSIX/Unix/Linux things until this test can be made + * more platform-independent. + */ +#ifdef H5_HAVE_FORK + +#include "use.h" + +/* Global Variable definitions */ +options_t UC_opts; /* Use Case Options */ +const char *progname_g="use_append_chunk"; /* program name */ + +/* Setup parameters for the use case. + * Return: 0 succeed; -1 fail. + */ +int setup_parameters(int argc, char * const argv[]) +{ + /* use case defaults */ + HDmemset(&UC_opts, 0, sizeof(options_t)); + UC_opts.chunksize = Chunksize_DFT; + UC_opts.use_swmr = 1; /* use swmr open */ + UC_opts.iterations = 1; + UC_opts.chunkplanes = 1; + + /* parse options */ + if (parse_option(argc, argv) < 0){ + return(-1); + } + /* set chunk dims */ + UC_opts.chunkdims[0] = UC_opts.chunkplanes; + UC_opts.chunkdims[1]=UC_opts.chunkdims[2]=UC_opts.chunksize; + + /* set dataset initial and max dims */ + UC_opts.dims[0] = 0; + UC_opts.max_dims[0] = H5S_UNLIMITED; + UC_opts.dims[1] = UC_opts.dims[2] = UC_opts.max_dims[1]=UC_opts.max_dims[2]=UC_opts.chunksize; + + /* set nplanes */ + if (UC_opts.nplanes == 0) + UC_opts.nplanes = UC_opts.chunksize; + + /* show parameters and return */ + show_parameters(); + return(0); +} + + +/* Overall Algorithm: + * Parse options from user; + * Generate/pre-created test files needed and close it; + * fork: child process becomes the reader process; + * while parent process continues as the writer process; + * both run till ending conditions are met. + */ +int +main(int argc, char *argv[]) +{ + pid_t childpid=0; + pid_t mypid, tmppid; + int child_status; + int child_wait_option=0; + int ret_value = 0; + int child_ret_value; + hbool_t send_wait = 0; + + /* initialization */ + if (setup_parameters(argc, argv) < 0){ + Hgoto_error(1); + } + + /* Determine the need to send/wait message file*/ + if(UC_opts.launch == UC_READWRITE) { + HDunlink(WRITER_MESSAGE); + send_wait = 1; + } + + /* ==============================================================*/ + /* UC_READWRITE: create datafile, launch both reader and writer. */ + /* UC_WRITER: create datafile, skip reader, launch writer. */ + /* UC_READER: skip create, launch reader, exit. */ + /* ==============================================================*/ + /* ============*/ + /* Create file */ + /* ============*/ + if (UC_opts.launch != UC_READER){ + printf("Creating skeleton data file for test...\n"); + if (create_uc_file() < 0){ + fprintf(stderr, "***encounter error\n"); + Hgoto_error(1); + }else + printf("File created.\n"); + } + + if (UC_opts.launch==UC_READWRITE){ + /* fork process */ + if((childpid = fork()) < 0) { + perror("fork"); + Hgoto_error(1); + }; + }; + mypid = getpid(); + + /* ============= */ + /* launch reader */ + /* ============= */ + if (UC_opts.launch != UC_WRITER){ + /* child process launch the reader */ + if(0 == childpid) { + printf("%d: launch reader process\n", mypid); + if (read_uc_file(send_wait) < 0){ + fprintf(stderr, "read_uc_file encountered error\n"); + exit(1); + } + exit(0); + } + } + + /* ============= */ + /* launch writer */ + /* ============= */ + /* this process continues to launch the writer */ + printf("%d: continue as the writer process\n", mypid); + if (write_uc_file(send_wait) < 0){ + fprintf(stderr, "write_uc_file encountered error\n"); + Hgoto_error(1); + } + + /* ================================================ */ + /* If readwrite, collect exit code of child process */ + /* ================================================ */ + if (UC_opts.launch == UC_READWRITE){ + if ((tmppid = waitpid(childpid, &child_status, child_wait_option)) < 0){ + perror("waitpid"); + Hgoto_error(1); + } + if (WIFEXITED(child_status)){ + if ((child_ret_value=WEXITSTATUS(child_status)) != 0){ + printf("%d: child process exited with non-zero code (%d)\n", + mypid, child_ret_value); + Hgoto_error(2); + } + } else { + printf("%d: child process terminated abnormally\n", mypid); + Hgoto_error(2); + } + } + +done: + /* Print result and exit */ + if (ret_value != 0){ + printf("Error(s) encountered\n"); + }else{ + printf("All passed\n"); + } + + return(ret_value); +} + +#else /* H5_HAVE_FORK */ + +int +main(void) +{ + HDfprintf(stderr, "Non-POSIX platform. Skipping.\n"); + return EXIT_SUCCESS; +} /* end main() */ + +#endif /* H5_HAVE_FORK */ + diff --git a/test/use_append_mchunks.c b/test/use_append_mchunks.c new file mode 100644 index 0000000..7728225 --- /dev/null +++ b/test/use_append_mchunks.c @@ -0,0 +1,226 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Use Case 1.8 Appending a hyperslab of multiple chunks. + * Description: + * Appending a hyperslab that spans several chunks of a dataset with + * unlimited dimensions within a pre-created file and reading the new + * data back. + * Goal: + * Read data appended by the Writer to a pre-existing dataset in a + * file. The dataset has one or more unlimited dimensions. The data + * is appended by a hyperslab that is contained in several chunks (for + * example, appending 2-dim planes along the slowest changing dimension + * in the 3-dim dataset and each plane is covered by 4 chunks). + * Level: + * User Level + * Guarantees: + * o Readers will see the modified dimension sizes after the Writer + * finishes HDF5 metadata updates and issues H5Fflush or H5Oflush calls. + * o Readers will see newly appended data after the Writer finishes + * the flush operation. + * + * Preconditions: + * o Readers are not allowed to modify the file. + * o All datasets that are modified by the Writer exist when the + * Writer opens the file. + * o All datasets that are modified by the Writer exist when a Reader + * opens the file. + * + * Main Success Scenario: + * 1. An application creates a file with required objects (groups, + * datasets, and attributes). + * 2. The Writer opens the file and datasets in the file and starts + * adding data using H5Dwrite call with a hyperslab selection that + * spans several chunks. + * 3. A Reader opens the file and a dataset in a file; if the size of + * the unlimited dimension has changed, reads the appended data back. + * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* Created: Albert Cheng, 2013/6/1 */ + +#include "h5test.h" + +/* This test uses many POSIX things that are not available on + * Windows. We're using a check for fork(2) here as a proxy for + * all POSIX/Unix/Linux things until this test can be made + * more platform-independent. + */ +#ifdef H5_HAVE_FORK + +#include "use.h" + +/* Global Variable definitions */ +options_t UC_opts; /* Use Case Options */ +const char *progname_g="use_append_mchunks"; /* program name */ + +/* Setup parameters for the use case. + * Return: 0 succeed; -1 fail. + */ +int setup_parameters(int argc, char * const argv[]) +{ + /* use case defaults */ + HDmemset(&UC_opts, 0, sizeof(options_t)); + UC_opts.chunksize = Chunksize_DFT; + UC_opts.use_swmr = 1; /* use swmr open */ + UC_opts.iterations = 1; + UC_opts.chunkplanes = 1; + + /* parse options */ + if (parse_option(argc, argv) < 0){ + return(-1); + } + /* set chunk dims */ + UC_opts.chunkdims[0] = UC_opts.chunkplanes; + UC_opts.chunkdims[1]=UC_opts.chunkdims[2]=UC_opts.chunksize; + + /* set dataset initial and max dims */ + UC_opts.dims[0] = 0; + UC_opts.max_dims[0] = H5S_UNLIMITED; + UC_opts.dims[1] = UC_opts.dims[2] = UC_opts.max_dims[1]=UC_opts.max_dims[2]=2*UC_opts.chunksize; + + /* set nplanes */ + if (UC_opts.nplanes == 0) + UC_opts.nplanes = 2*UC_opts.chunksize; + + /* show parameters and return */ + show_parameters(); + return(0); +} + + +/* Overall Algorithm: + * Parse options from user; + * Generate/pre-created test files needed and close it; + * fork: child process becomes the reader process; + * while parent process continues as the writer process; + * both run till ending conditions are met. + */ +int +main(int argc, char *argv[]) +{ + pid_t childpid=0; + pid_t mypid, tmppid; + int child_status; + int child_wait_option=0; + int ret_value = 0; + int child_ret_value; + hbool_t send_wait = 0; + + /* initialization */ + if (setup_parameters(argc, argv) < 0){ + Hgoto_error(1); + } + + /* Determine the need to send/wait message file*/ + if(UC_opts.launch == UC_READWRITE) { + HDunlink(WRITER_MESSAGE); + send_wait = 1; + } + + /* ==============================================================*/ + /* UC_READWRITE: create datafile, launch both reader and writer. */ + /* UC_WRITER: create datafile, skip reader, launch writer. */ + /* UC_READER: skip create, launch reader, exit. */ + /* ==============================================================*/ + /* ============*/ + /* Create file */ + /* ============*/ + if (UC_opts.launch != UC_READER){ + printf("Creating skeleton data file for test...\n"); + if (create_uc_file() < 0){ + fprintf(stderr, "***encounter error\n"); + Hgoto_error(1); + }else + printf("File created.\n"); + } + + if (UC_opts.launch==UC_READWRITE){ + /* fork process */ + if((childpid = fork()) < 0) { + perror("fork"); + Hgoto_error(1); + }; + }; + mypid = getpid(); + + /* ============= */ + /* launch reader */ + /* ============= */ + if (UC_opts.launch != UC_WRITER){ + /* child process launch the reader */ + if(0 == childpid) { + printf("%d: launch reader process\n", mypid); + if (read_uc_file(send_wait) < 0){ + fprintf(stderr, "read_uc_file encountered error\n"); + exit(1); + } + exit(0); + } + } + + /* ============= */ + /* launch writer */ + /* ============= */ + /* this process continues to launch the writer */ + printf("%d: continue as the writer process\n", mypid); + if (write_uc_file(send_wait) < 0){ + fprintf(stderr, "write_uc_file encountered error\n"); + Hgoto_error(1); + } + + /* ================================================ */ + /* If readwrite, collect exit code of child process */ + /* ================================================ */ + if (UC_opts.launch == UC_READWRITE){ + if ((tmppid = waitpid(childpid, &child_status, child_wait_option)) < 0){ + perror("waitpid"); + Hgoto_error(1); + } + if (WIFEXITED(child_status)){ + if ((child_ret_value=WEXITSTATUS(child_status)) != 0){ + printf("%d: child process exited with non-zero code (%d)\n", + mypid, child_ret_value); + Hgoto_error(2); + } + } else { + printf("%d: child process terminated abnormally\n", mypid); + Hgoto_error(2); + } + } + +done: + /* Print result and exit */ + if (ret_value != 0){ + printf("Error(s) encountered\n"); + }else{ + printf("All passed\n"); + } + + return(ret_value); +} + +#else /* H5_HAVE_FORK */ + +int +main(void) +{ + HDfprintf(stderr, "Non-POSIX platform. Skipping.\n"); + return EXIT_SUCCESS; +} /* end main() */ + +#endif /* H5_HAVE_FORK */ + diff --git a/test/use_common.c b/test/use_common.c new file mode 100644 index 0000000..99c0bd1 --- /dev/null +++ b/test/use_common.c @@ -0,0 +1,653 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +#include "h5test.h" + +/* This test uses many POSIX things that are not available on + * Windows. We're using a check for fork(2) here as a proxy for + * all POSIX/Unix/Linux things until this test can be made + * more platform-independent. + */ +#ifdef H5_HAVE_FORK + +#include "use.h" + +#define H5D_FRIEND /*suppress error about including H5Dpkg */ +#define H5D_TESTING +#include "H5Dpkg.h" + +void +usage(const char *prog) +{ + HDfprintf(stderr, "usage: %s [OPTIONS]\n", prog); + HDfprintf(stderr, " OPTIONS\n"); + HDfprintf(stderr, " -h, --help Print a usage message and exit\n"); + HDfprintf(stderr, " -f FN Test file name [default: %s.h5]\n", prog); + HDfprintf(stderr, " -i N, --iteration=N Number of iterations to repeat the whole thing. [default: 1]\n"); + HDfprintf(stderr, " -l w|r launch writer or reader only. [default: launch both]\n"); + HDfprintf(stderr, " -n N, --nplanes=N Number of planes to write/read. [default: 1000]\n"); + HDfprintf(stderr, " -s N, --swmr=N Use SWMR mode (0: no, non-0: yes) default is yes\n"); + HDfprintf(stderr, " -z N, --chunksize=N Chunk size [default: %d]\n", Chunksize_DFT); + HDfprintf(stderr, " -y N, --chunkplanes=N Number of planes per chunk [default: 1]\n"); + HDfprintf(stderr, "\n"); +} /* end usage() */ + +/* Setup Use Case parameters by parsing command line options. +* Setup default values if not set by options. */ +int +parse_option(int argc, char * const argv[]) +{ + int ret_value=0; + int c; + /* command line options: See function usage for a description */ + const char *nagg_options = "f:hi:l:n:s:y:z:"; + + /* suppress getopt from printing error */ + opterr = 0; + + while (1){ + c = getopt (argc, argv, nagg_options); + if (-1 == c) + break; + switch (c) { + case 'h': + usage(progname_g); + exit(0); + break; + case 'f': /* usecase data file name */ + UC_opts.filename = optarg; + break; + case 'i': /* iterations */ + if ((UC_opts.iterations = atoi(optarg)) <= 0){ + fprintf(stderr, "bad iterations number %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'l': /* launch reader or writer only */ + switch (*optarg) { + case 'r': /* reader only */ + UC_opts.launch = UC_READER; + break; + case 'w': /* writer only */ + UC_opts.launch = UC_WRITER; + break; + default: + fprintf(stderr, "launch value(%c) should be w or r only.\n", *optarg); + usage(progname_g); + Hgoto_error(-1); + break; + } + break; + case 'n': /* number of planes to write/read */ + if ((UC_opts.nplanes = atoi(optarg)) <= 0){ + fprintf(stderr, "bad number of planes %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 's': /* use swmr file open mode */ + if ((UC_opts.use_swmr = atoi(optarg)) < 0){ + fprintf(stderr, "swmr value should be 0(no) or 1(yes)\n"); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'y': /* Number of planes per chunk */ + if ((UC_opts.chunkplanes = atoi(optarg)) <= 0){ + fprintf(stderr, "bad number of planes per chunk %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'z': /* size of chunk=(z,z) */ + if ((UC_opts.chunksize = atoi(optarg)) <= 0){ + fprintf(stderr, "bad chunksize %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case '?': + fprintf(stderr, "getopt returned '%c'.\n", c); + Hgoto_error(-1); + default: + fprintf(stderr, "getopt returned unexpected value.\n"); + fprintf(stderr, "Unexpected value is %d\n", c); + Hgoto_error(-1); + } + } + + /* set test file name if not given */ + if (!UC_opts.filename){ + /* default data file name is <progname>.h5 */ + if ((UC_opts.filename=(char*)HDmalloc(HDstrlen(progname_g)+4))==NULL) { + fprintf(stderr, "malloc: failed\n"); + Hgoto_error(-1); + }; + HDstrcpy(UC_opts.filename, progname_g); + HDstrcat(UC_opts.filename, ".h5"); + } + +done: + /* All done. */ + return(ret_value); +} + +/* Show parameters used for this use case */ +void show_parameters(void){ + printf("===Parameters used:===\n"); + printf("chunk dims=(%llu, %llu, %llu)\n", (unsigned long long)UC_opts.chunkdims[0], + (unsigned long long)UC_opts.chunkdims[1], (unsigned long long)UC_opts.chunkdims[2]); + printf("dataset max dims=(%llu, %llu, %llu)\n", (unsigned long long)UC_opts.max_dims[0], + (unsigned long long)UC_opts.max_dims[1], (unsigned long long)UC_opts.max_dims[2]); + printf("number of planes to write=%llu\n", (unsigned long long)UC_opts.nplanes); + printf("using SWMR mode=%s\n", UC_opts.use_swmr ? "yes(1)" : "no(0)"); + printf("data filename=%s\n", UC_opts.filename); + printf("launch part="); + switch (UC_opts.launch){ + case UC_READWRITE: + printf("Reader/Writer\n"); + break; + case UC_WRITER: + printf("Writer\n"); + break; + case UC_READER: + printf("Reader\n"); + break; + default: + /* should not happen */ + printf("Illegal part(%d)\n", UC_opts.launch); + }; + printf("number of iterations=%d (not used yet)\n", UC_opts.iterations); + printf("===Parameters shown===\n"); +} + +/* Create the skeleton use case file for testing. + * It has one 3d dataset using chunked storage. + * The dataset is (unlimited, chunksize, chunksize). + * Dataset type is 2 bytes integer. + * It starts out "empty", i.e., first dimension is 0. + * + * Return: 0 succeed; -1 fail. + */ +int create_uc_file(void) +{ + hsize_t dims[3]; /* Dataset starting dimensions */ + hid_t fid; /* File ID for new HDF5 file */ + hid_t dcpl; /* Dataset creation property list */ + hid_t sid; /* Dataspace ID */ + hid_t dsid; /* Dataset ID */ + hid_t fapl; /* File access property list */ + H5D_chunk_index_t idx_type; /* Chunk index type */ + + /* Create the file */ + if((fapl = h5_fileaccess()) < 0) + return -1; + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + if((fid = H5Fcreate(UC_opts.filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) + return -1; + + /* Set up dimension sizes */ + dims[0] = 0; + dims[1] = dims[2] = UC_opts.max_dims[1]; + + /* Create dataspace for creating datasets */ + if((sid = H5Screate_simple(3, dims, UC_opts.max_dims)) < 0) + return -1; + + /* Create dataset creation property list */ + if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) + return -1; + if(H5Pset_chunk(dcpl, 3, UC_opts.chunkdims) < 0) + return -1; + + /* create dataset of progname */ + if((dsid = H5Dcreate2(fid, progname_g, UC_DATATYPE, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) + return -1; + + /* Check that the chunk index type is not version 1 B-tree. + * Version 1 B-trees are not supported under SWMR. + */ + if(H5D__layout_idx_type_test(dsid, &idx_type) < 0) + return -1; + if(idx_type == H5D_CHUNK_IDX_BTREE) { + fprintf(stderr, "ERROR: Chunk index is version 1 B-tree: aborting.\n"); + return -1; + } + + /* Close everything */ + if(H5Dclose(dsid) < 0) + return -1; + if(H5Pclose(fapl) < 0) + return -1; + if(H5Pclose(dcpl) < 0) + return -1; + if(H5Sclose(sid) < 0) + return -1; + if(H5Fclose(fid) < 0) + return -1; + + return 0; +} + +/* Append planes, each of (1,2*chunksize,2*chunksize) to the dataset. + * In other words, 4 chunks are appended to the dataset at a time. + * Fill each plan with the plane number and then write it at the nth plane. + * Increase the plane number and repeat till the end of dataset, when it + * reaches chunksize long. End product is a (2*chunksize)^3 cube. + * + * Return: 0 succeed; -1 fail. + */ +int write_uc_file(hbool_t tosend) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t dsid; /* dataset ID */ + hid_t fapl; /* File access property list */ + hid_t dcpl; /* Dataset creation property list */ + char *name; + UC_CTYPE *buffer, *bufptr; /* data buffer */ + hsize_t cz=UC_opts.chunksize; /* Chunk size */ + hid_t f_sid; /* dataset file space id */ + hid_t m_sid; /* memory space id */ + int rank; /* rank */ + hsize_t chunk_dims[3]; /* Chunk dimensions */ + hsize_t dims[3]; /* Dataspace dimensions */ + hsize_t memdims[3]; /* Memory space dimensions */ + hsize_t start[3] = {0,0,0}, count[3]; /* Hyperslab selection values */ + hsize_t i, j, k; + + name = UC_opts.filename; + + /* Open the file */ + if((fapl = h5_fileaccess()) < 0) + return -1; + if(UC_opts.use_swmr) + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + if((fid = H5Fopen(name, H5F_ACC_RDWR | (UC_opts.use_swmr ? H5F_ACC_SWMR_WRITE : 0), fapl)) < 0){ + fprintf(stderr, "H5Fopen failed\n"); + return -1; + } + + if(tosend) + /* Send a message that H5Fopen is complete--releasing the file lock */ + h5_send_message(WRITER_MESSAGE, NULL, NULL); + + /* Open the dataset of the program name */ + if((dsid = H5Dopen2(fid, progname_g, H5P_DEFAULT)) < 0){ + fprintf(stderr, "H5Dopen2 failed\n"); + return -1; + } + + /* Find chunksize used */ + if ((dcpl = H5Dget_create_plist(dsid)) < 0){ + fprintf(stderr, "H5Dget_create_plist failed\n"); + return -1; + } + if (H5D_CHUNKED != H5Pget_layout(dcpl)){ + fprintf(stderr, "storage layout is not chunked\n"); + return -1; + } + if ((rank = H5Pget_chunk(dcpl, 3, chunk_dims)) != 3){ + fprintf(stderr, "storage rank is not 3\n"); + return -1; + } + + /* verify chunk_dims against set paramenters */ + if (chunk_dims[0]!=UC_opts.chunkdims[0] || chunk_dims[1] != cz || chunk_dims[2] != cz){ + fprintf(stderr, "chunk size is not as expected. Got dims=(%llu,%llu,%llu)\n", + (unsigned long long)chunk_dims[0], (unsigned long long)chunk_dims[1], + (unsigned long long)chunk_dims[2]); + return -1; + } + + /* allocate space for data buffer 1 X dims[1] X dims[2] of UC_CTYPE */ + memdims[0]=1; + memdims[1] = UC_opts.dims[1]; + memdims[2] = UC_opts.dims[2]; + if ((buffer=(UC_CTYPE*)HDmalloc((size_t)memdims[1]*(size_t)memdims[2]*sizeof(UC_CTYPE)))==NULL) { + fprintf(stderr, "malloc: failed\n"); + return -1; + }; + + /* + * Get dataset rank and dimension. + */ + f_sid = H5Dget_space(dsid); /* Get filespace handle first. */ + rank = H5Sget_simple_extent_ndims(f_sid); + if (rank != UC_RANK){ + fprintf(stderr, "rank(%d) of dataset does not match\n", rank); + return -1; + } + if (H5Sget_simple_extent_dims(f_sid, dims, NULL) < 0){ + fprintf(stderr, "H5Sget_simple_extent_dims got error\n"); + return -1; + } + printf("dataset rank %d, dimensions %llu x %llu x %llu\n", + rank, (unsigned long long)(dims[0]), (unsigned long long)(dims[1]), + (unsigned long long)(dims[2])); + /* verify that file space dims are as expected and are consistent with memory space dims */ + if (dims[0] != 0 || dims[1] != memdims[1] || dims[2] != memdims[2]){ + fprintf(stderr, "dataset is not empty. Got dims=(%llu,%llu,%llu)\n", + (unsigned long long)dims[0], (unsigned long long)dims[1], + (unsigned long long)dims[2]); + return -1; + } + + /* setup mem-space for buffer */ + if ((m_sid=H5Screate_simple(rank, memdims, NULL))<0){ + fprintf(stderr, "H5Screate_simple for memory failed\n"); + return -1; + }; + + /* write planes */ + count[0]=1; + count[1]=dims[1]; + count[2]=dims[2]; + for (i=0; i<UC_opts.nplanes; i++){ + /* fill buffer with value i+1 */ + bufptr = buffer; + for (j=0; j<dims[1]; j++) + for (k=0; k<dims[2]; k++) + *bufptr++ = i; + + /* Cork the dataset's metadata in the cache, if SWMR is enabled */ + if(UC_opts.use_swmr) + if(H5Odisable_mdc_flushes(dsid) < 0) { + fprintf(stderr, "H5Odisable_mdc_flushes failed\n"); + return -1; + } + + /* extend the dataset by one for new plane */ + dims[0]=i+1; + if(H5Dset_extent(dsid, dims) < 0){ + fprintf(stderr, "H5Dset_extent failed\n"); + return -1; + } + + /* Get the dataset's dataspace */ + if((f_sid = H5Dget_space(dsid)) < 0){ + fprintf(stderr, "H5Dset_extent failed\n"); + return -1; + } + + start[0]=i; + /* Choose the next plane to write */ + if(H5Sselect_hyperslab(f_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0){ + fprintf(stderr, "Failed H5Sselect_hyperslab\n"); + return -1; + } + + /* Write plane to the dataset */ + if(H5Dwrite(dsid, UC_DATATYPE, m_sid, f_sid, H5P_DEFAULT, buffer) < 0){ + fprintf(stderr, "Failed H5Dwrite\n"); + return -1; + } + + /* Uncork the dataset's metadata from the cache, if SWMR is enabled */ + if(UC_opts.use_swmr) + if(H5Oenable_mdc_flushes(dsid) < 0) { + fprintf(stderr, "H5Oenable_mdc_flushes failed\n"); + return -1; + } + + /* flush file to make the just written plane available. */ + if(H5Dflush(dsid) < 0) + { + fprintf(stderr, "Failed to H5Fflush file\n"); + return -1; + } + } + + /* Done writing. Free/Close all resources including data file */ + HDfree(buffer); + if (H5Dclose(dsid) < 0){ + fprintf(stderr, "Failed to close datasete\n"); + return -1; + } + if (H5Sclose(m_sid) < 0){ + fprintf(stderr, "Failed to close memory space\n"); + return -1; + } + if (H5Sclose(f_sid) < 0){ + fprintf(stderr, "Failed to close file space\n"); + return -1; + } + if (H5Pclose(fapl) < 0){ + fprintf(stderr, "Failed to property list\n"); + return -1; + } + if (H5Fclose(fid) < 0){ + fprintf(stderr, "Failed to close file id\n"); + return -1; + } + + return 0; +} + + +/* Read planes from the dataset. + * It expects the dataset is being changed (growing). + * It checks the unlimited dimension (1st one). When it increases, + * it will read in the new planes, one by one, and verify the data correctness. + * (The nth plan should contain all "n".) + * When the unlimited dimension grows to the chunksize (it becomes a cube), + * that is the expected end of data, the reader exits. + * + * Return: 0 succeed; -1 fail. + */ +int read_uc_file(hbool_t towait) +{ + hid_t fapl; /* file access property list ID */ + hid_t fid; /* File ID for new HDF5 file */ + hid_t dsid; /* dataset ID */ + char *name; + UC_CTYPE *buffer, *bufptr; /* read data buffer */ + hid_t f_sid; /* dataset file space id */ + hid_t m_sid; /* memory space id */ + int rank; /* rank */ + hsize_t dims[3]; /* Dataspace dimensions */ + hsize_t memdims[3]; /* Memory space dimensions */ + hsize_t nplane=0, nplane_old=0; /* nth plane, last nth plane */ + hsize_t start[3] = {0,0,0}, count[3]; /* Hyperslab selection values */ + hsize_t j, k; + int nreadererr=0; + int nerrs; + int nonewplane; + + /* Before reading, wait for the message that H5Fopen is complete--file lock is released */ + if(towait && h5_wait_message(WRITER_MESSAGE) < 0) { + fprintf(stderr, "Cannot find writer message file...failed\n"); + return -1; + } + + name = UC_opts.filename; + + /* Open the file */ + if((fapl = h5_fileaccess()) < 0) + return -1; + if((fid = H5Fopen(name, H5F_ACC_RDONLY | (UC_opts.use_swmr ? H5F_ACC_SWMR_READ : 0), fapl)) < 0){ + fprintf(stderr, "H5Fopen failed\n"); + return -1; + } + if (H5Pclose(fapl) < 0){ + fprintf(stderr, "Failed to property list\n"); + return -1; + } + + + /* Open the dataset of the program name */ + if((dsid = H5Dopen2(fid, progname_g, H5P_DEFAULT)) < 0){ + fprintf(stderr, "H5Dopen2 failed\n"); + return -1; + } + + /* allocate space for data buffer 1 X dims[1] X dims[2] of UC_CTYPE */ + memdims[0]=1; + memdims[1] = UC_opts.dims[1]; + memdims[2] = UC_opts.dims[2]; + if ((buffer=(UC_CTYPE*)HDmalloc((size_t)memdims[1]*(size_t)memdims[2]*sizeof(UC_CTYPE)))==NULL) { + fprintf(stderr, "malloc: failed\n"); + return -1; + }; + + /* + * Get dataset rank and dimension. + * Verify dimension is as expected (unlimited,2*chunksize,2*chunksize). + */ + f_sid = H5Dget_space(dsid); /* Get filespace handle first. */ + rank = H5Sget_simple_extent_ndims(f_sid); + if (rank != UC_RANK){ + fprintf(stderr, "rank(%d) of dataset does not match\n", rank); + return -1; + } + if (H5Sget_simple_extent_dims(f_sid, dims, NULL) < 0){ + fprintf(stderr, "H5Sget_simple_extent_dims got error\n"); + return -1; + } + printf("dataset rank %d, dimensions %llu x %llu x %llu\n", + rank, (unsigned long long)(dims[0]), (unsigned long long)(dims[1]), + (unsigned long long)(dims[2])); + /* verify that file space dims are as expected and are consistent with memory space dims */ + if (dims[1] != memdims[1] || dims[2] != memdims[2]){ + fprintf(stderr, "dataset dimension is not as expected. Got dims=(%llu,%llu,%llu)\n", + (unsigned long long)dims[0], (unsigned long long)dims[1], + (unsigned long long)dims[2]); + fprintf(stderr, "But memdims=(%llu,%llu,%llu)\n", + (unsigned long long)memdims[0], (unsigned long long)memdims[1], + (unsigned long long)memdims[2]); + return -1; + } + + /* setup mem-space for buffer */ + if ((m_sid=H5Screate_simple(rank, memdims, NULL))<0){ + fprintf(stderr, "H5Screate_simple for memory failed\n"); + return -1; + }; + + /* Read 1 plane at a time whenever the dataset grows larger + * (along dim[0]) */ + count[0]=1; + count[1]=dims[1]; + count[2]=dims[2]; + /* quit when all nplanes have been read */ + nonewplane=0; + while (nplane_old < UC_opts.nplanes ){ + /* print progress message according to if new planes are availalbe */ + if (nplane_old < dims[0]) { + if (nonewplane){ + /* end the previous message */ + printf("\n"); + nonewplane=0; + } + printf("reading planes %llu to %llu\n", (unsigned long long)nplane_old, + (unsigned long long)dims[0]); + }else{ + if (nonewplane){ + printf("."); + if (nonewplane>=30){ + fprintf(stderr, "waited too long for new plane, quit.\n"); + return -1; + } + }else{ + /* print mesg only the first time; dots still no new plane */ + printf("no new planes to read "); + } + nonewplane++; + /* pause for a second */ + HDsleep(1); + } + for (nplane=nplane_old; nplane < dims[0]; nplane++){ + /* read planes between last old nplanes and current extent */ + /* Get the dataset's dataspace */ + if((f_sid = H5Dget_space(dsid)) < 0){ + fprintf(stderr, "H5Dget_space failed\n"); + return -1; + } + + start[0]=nplane; + /* Choose the next plane to read */ + if(H5Sselect_hyperslab(f_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0){ + fprintf(stderr, "H5Sselect_hyperslab failed\n"); + return -1; + } + + /* Read the plane from the dataset */ + if(H5Dread(dsid, UC_DATATYPE, m_sid, f_sid, H5P_DEFAULT, buffer) < 0){ + fprintf(stderr, "H5Dread failed\n"); + return -1; + } + + /* compare read data with expected data value which is nplane */ + bufptr = buffer; + nerrs=0; + for (j=0; j<dims[1]; j++){ + for (k=0; k<dims[2]; k++){ + if ((hsize_t)*bufptr++ != nplane){ + if (++nerrs < ErrorReportMax){ + fprintf(stderr, + "found error %llu plane(%llu,%llu), expected %llu, got %d\n", + (unsigned long long)nplane, (unsigned long long)j, + (unsigned long long)k, (unsigned long long)nplane, (int)*(bufptr-1)); + } + } + } + } + if (nerrs){ + nreadererr++; + fprintf(stderr, "found %d unexpected values in plane %llu\n", nerrs, + (unsigned long long)nplane); + } + } + /* Have read all current planes */ + nplane_old=dims[0]; + + /* check if dataset has grown since last time */ +#if 0 + /* close dsid and file, then reopen them */ + if (H5Dclose(dsid) < 0){ + fprintf(stderr, "H5Dclose failed\n"); + return -1; + } + if (H5Fclose(fid) < 0){ + fprintf(stderr, "H5Fclose failed\n"); + return -1; + } + if((fid = H5Fopen(name, H5F_ACC_RDONLY | (UC_opts.use_swmr ? H5F_ACC_SWMR_READ : 0), H5P_DEFAULT)) < 0){ + fprintf(stderr, "H5Fopen failed\n"); + return -1; + } + if((dsid = H5Dopen2(fid, progname_g, H5P_DEFAULT)) < 0){ + fprintf(stderr, "H5Dopen2 failed\n"); + return -1; + } +#else + H5Drefresh(dsid); +#endif + f_sid = H5Dget_space(dsid); /* Get filespace handle first. */ + if (H5Sget_simple_extent_dims(f_sid, dims, NULL) < 0){ + fprintf(stderr, "H5Sget_simple_extent_dims got error\n"); + return -1; + } + } + + if (nreadererr) + return -1; + else + return 0; +} + +#endif /* H5_HAVE_FORK */ + diff --git a/test/use_disable_mdc_flushes.c b/test/use_disable_mdc_flushes.c new file mode 100644 index 0000000..2915cc3 --- /dev/null +++ b/test/use_disable_mdc_flushes.c @@ -0,0 +1,549 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* + * This is copied from use_append_chunk.c with modifications to show + * the usage of H5Odisable_mdc_flushes/H5Oenable_mdc_flushes/H5Oare_mdc_flushes_disabled public routines. + */ + +#include "h5test.h" + +/* This test uses many POSIX things that are not available on + * Windows. We're using a check for fork(2) here as a proxy for + * all POSIX/Unix/Linux things until this test can be made + * more platform-independent. + */ +#ifdef H5_HAVE_FORK + +#define H5D_FRIEND /*suppress error about including H5Dpkg */ +#define H5D_TESTING +#include "H5Dpkg.h" + +/* Global Variable definitions */ +const char *progname_g="use_disable_mdc_flushes"; /* program name */ + +/* these two definitions must match each other */ +#define UC_DATATYPE H5T_NATIVE_SHORT /* use case HDF5 data type */ +#define UC_CTYPE short /* use case C data type */ +#define UC_RANK 3 /* use case dataset rank */ +#define Chunksize_DFT 256 /* chunksize default */ +#define Hgoto_error(val) {ret_value=val; goto done;} + + +char *filename_g; +hsize_t nplanes_g; +int use_swmr_g; +int chunkplanes_g; +int chunksize_g; +hsize_t dims_g[UC_RANK]; +hsize_t max_dims_g[UC_RANK]; +hsize_t chunkdims_g[UC_RANK]; + +static void usage(const char *prog); +static int parse_option(int argc, char * const argv[]); +static void show_parameters(void); +static int create_file(void); +static int setup_parameters(int argc, char * const argv[]); + +/* + * Note: Long options are not yet implemented. + * + * usage: use_disable_mdc_flushes [OPTIONS] + * OPTIONS + * -h, --help Print a usage message and exit + * -f FN Test file name [default: use_disable_mdc_flushes.h5] + * -n N, --nplanes=N Number of planes to write. [default: 1000] + * -s N, --swmr=N Use SWMR mode (0: no, non-0: yes) default is yes + * -z N, --chunksize=N Chunk size [default: 256] + * -y N, --chunkplanes=N Number of planes per chunk [default: 1] + */ +static void +usage(const char *prog) +{ + fprintf(stderr, "usage: %s [OPTIONS]\n", prog); + fprintf(stderr, " OPTIONS\n"); + fprintf(stderr, " -h Print a usage message and exit\n"); + fprintf(stderr, " -f FN Test file name [default: %s.h5]\n", prog); + fprintf(stderr, " -n N Number of planes to write. [default: 1000]\n"); + fprintf(stderr, " -s N Use SWMR mode (0: no, non-0: yes) default is yes\n"); + fprintf(stderr, " -z N Chunk size [default: %d]\n", Chunksize_DFT); + fprintf(stderr, " -y N Number of planes per chunk [default: 1]\n"); + fprintf(stderr, "\n"); +} /* usage() */ + + +/* + * Setup Use Case parameters by parsing command line options. + * Setup default values if not set by options. */ +static int +parse_option(int argc, char * const argv[]) +{ + int ret_value=0; + int c; + /* command line options: See function usage for a description */ + const char *cmd_options = "f:hn:s:y:z:"; + + /* suppress getopt from printing error */ + opterr = 0; + + while (1){ + c = getopt (argc, argv, cmd_options); + if (-1 == c) + break; + switch (c) { + case 'h': + usage(progname_g); + exit(0); + break; + case 'f': /* usecase data file name */ + filename_g = optarg; + break; + case 'n': /* number of planes to write/read */ + if ((nplanes_g = atoi(optarg)) <= 0){ + fprintf(stderr, "bad number of planes %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 's': /* use swmr file open mode */ + if ((use_swmr_g = atoi(optarg)) < 0){ + fprintf(stderr, "swmr value should be 0(no) or 1(yes)\n"); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'y': /* Number of planes per chunk */ + if ((chunkplanes_g = atoi(optarg)) <= 0){ + fprintf(stderr, "bad number of planes per chunk %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case 'z': /* size of chunk=(z,z) */ + if ((chunksize_g = atoi(optarg)) <= 0){ + fprintf(stderr, "bad chunksize %s, must be a positive integer\n", optarg); + usage(progname_g); + Hgoto_error(-1); + }; + break; + case '?': + fprintf(stderr, "getopt returned '%c'.\n", c); + Hgoto_error(-1); + default: + fprintf(stderr, "getopt returned unexpected value.\n"); + fprintf(stderr, "Unexpected value is %d\n", c); + Hgoto_error(-1); + } + } + + /* set test file name if not given */ + if (!filename_g){ + /* default data file name is <progname>.h5 */ + if ((filename_g = (char*)HDmalloc(HDstrlen(progname_g)+4))==NULL) { + fprintf(stderr, "malloc: failed\n"); + Hgoto_error(-1); + }; + HDstrcpy(filename_g, progname_g); + HDstrcat(filename_g, ".h5"); + } + +done: + /* All done. */ + return(ret_value); +} /* parse_option() */ + +/* Show parameters used for this use case */ +static void +show_parameters(void) +{ + printf("===Parameters used:===\n"); + printf("chunk dims=(%llu, %llu, %llu)\n", (unsigned long long)chunkdims_g[0], + (unsigned long long)chunkdims_g[1], (unsigned long long)chunkdims_g[2]); + printf("dataset max dims=(%llu, %llu, %llu)\n", (unsigned long long)max_dims_g[0], + (unsigned long long)max_dims_g[1], (unsigned long long)max_dims_g[2]); + printf("number of planes to write=%llu\n", (unsigned long long)nplanes_g); + printf("using SWMR mode=%s\n", use_swmr_g ? "yes(1)" : "no(0)"); + printf("data filename=%s\n", filename_g); + printf("===Parameters shown===\n"); +} /* show_parameters() */ + +/* + * Setup parameters for the use case. + * Return: 0 succeed; -1 fail. + */ +static int +setup_parameters(int argc, char * const argv[]) +{ + /* use case defaults */ + chunksize_g = Chunksize_DFT; + use_swmr_g = 1; /* use swmr open */ + chunkplanes_g = 1; + + /* parse options */ + if (parse_option(argc, argv) < 0){ + return(-1); + } + /* set chunk dims */ + chunkdims_g[0] = chunkplanes_g; + chunkdims_g[1]= chunkdims_g[2] = chunksize_g; + + /* set dataset initial and max dims */ + dims_g[0] = 0; + max_dims_g[0] = H5S_UNLIMITED; + dims_g[1] = dims_g[2] = max_dims_g[1] = max_dims_g[2] = chunksize_g; + + /* set nplanes */ + if (nplanes_g == 0) + nplanes_g = chunksize_g; + + /* show parameters and return */ + show_parameters(); + return(0); +} /* setup_parameters() */ + +/* + * Create the skeleton use case file for testing. + * It has one 3d dataset using chunked storage. + * The dataset is (unlimited, chunksize, chunksize). + * Dataset type is 2 bytes integer. + * It starts out "empty", i.e., first dimension is 0. + * + * Return: 0 succeed; -1 fail. + */ +static int +create_file(void) +{ + hsize_t dims[3]; /* Dataset starting dimensions */ + hid_t fid; /* File ID for new HDF5 file */ + hid_t dcpl; /* Dataset creation property list */ + hid_t sid; /* Dataspace ID */ + hid_t dsid; /* Dataset ID */ + hid_t fapl; /* File access property list */ + H5D_chunk_index_t idx_type; /* Chunk index type */ + + /* Create the file */ + if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) + return -1; + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + if((fid = H5Fcreate(filename_g, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) + return -1; + + /* Set up dimension sizes */ + dims[0] = 0; + dims[1] = dims[2] = max_dims_g[1]; + + /* Create dataspace for creating datasets */ + if((sid = H5Screate_simple(3, dims, max_dims_g)) < 0) + return -1; + + /* Create dataset creation property list */ + if((dcpl = H5Pcreate(H5P_DATASET_CREATE)) < 0) + return -1; + if(H5Pset_chunk(dcpl, 3, chunkdims_g) < 0) + return -1; + + /* create dataset of progname */ + if((dsid = H5Dcreate2(fid, progname_g, UC_DATATYPE, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT)) < 0) + return -1; + + /* Check that the chunk index type is not version 1 B-tree. + * Version 1 B-trees are not supported under SWMR. + */ + if(H5D__layout_idx_type_test(dsid, &idx_type) < 0) + return -1; + if(idx_type == H5D_CHUNK_IDX_BTREE) { + fprintf(stderr, "ERROR: Chunk index is version 1 B-tree: aborting.\n"); + return -1; + } + + /* Close everything */ + if(H5Dclose(dsid) < 0) + return -1; + if(H5Pclose(fapl) < 0) + return -1; + if(H5Pclose(dcpl) < 0) + return -1; + if(H5Sclose(sid) < 0) + return -1; + if(H5Fclose(fid) < 0) + return -1; + + return 0; +} /* create_file() */ + +/* + * Append planes, each of (1,2*chunksize,2*chunksize) to the dataset. + * In other words, 4 chunks are appended to the dataset at a time. + * Fill each plane with the plane number and then write it at the nth plane. + * Increase the plane number and repeat till the end of dataset, when it + * reaches chunksize long. End product is a (2*chunksize)^3 cube. + * + * Return: 0 succeed; -1 fail. + */ +static int +write_file(void) +{ + hid_t fid; /* File ID for new HDF5 file */ + hid_t dsid; /* dataset ID */ + hid_t fapl; /* File access property list */ + hid_t dcpl; /* Dataset creation property list */ + char *name; + UC_CTYPE *buffer, *bufptr; /* data buffer */ + hsize_t cz=chunksize_g; /* Chunk size */ + hid_t f_sid; /* dataset file space id */ + hid_t m_sid; /* memory space id */ + int rank; /* rank */ + hsize_t chunk_dims[3]; /* Chunk dimensions */ + hsize_t dims[3]; /* Dataspace dimensions */ + hsize_t memdims[3]; /* Memory space dimensions */ + hsize_t start[3] = {0,0,0}, count[3]; /* Hyperslab selection values */ + hbool_t disabled; /* Object's disabled status */ + hsize_t i, j, k; + + name = filename_g; + + /* Open the file */ + if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) + return -1; + if(use_swmr_g) + if(H5Pset_libver_bounds(fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + return -1; + if((fid = H5Fopen(name, H5F_ACC_RDWR | (use_swmr_g ? H5F_ACC_SWMR_WRITE : 0), fapl)) < 0){ + fprintf(stderr, "H5Fopen failed\n"); + return -1; + } + + /* Open the dataset of the program name */ + if((dsid = H5Dopen2(fid, progname_g, H5P_DEFAULT)) < 0){ + fprintf(stderr, "H5Dopen2 failed\n"); + return -1; + } + + /* Disabled mdc flushed for the dataset */ + if(H5Odisable_mdc_flushes(dsid) < 0) { + fprintf(stderr, "H5Odisable_mdc_flushes failed\n"); + return -1; + } + + /* Get mdc disabled status of the dataset */ + if(H5Oare_mdc_flushes_disabled(dsid, &disabled) < 0) { + fprintf(stderr, "H5Oare_mdc_flushes_disabled failed\n"); + return -1; + } else if(disabled) + printf("Dataset has disabled mdc flushes.\n"); + else + printf("Dataset should have disabled its mdc flushes.\n"); + + /* Find chunksize used */ + if ((dcpl = H5Dget_create_plist(dsid)) < 0){ + fprintf(stderr, "H5Dget_create_plist failed\n"); + return -1; + } + if (H5D_CHUNKED != H5Pget_layout(dcpl)){ + fprintf(stderr, "storage layout is not chunked\n"); + return -1; + } + if ((rank = H5Pget_chunk(dcpl, 3, chunk_dims)) != 3){ + fprintf(stderr, "storage rank is not 3\n"); + return -1; + } + + /* verify chunk_dims against set paramenters */ + if (chunk_dims[0]!= chunkdims_g[0] || chunk_dims[1] != cz || chunk_dims[2] != cz){ + fprintf(stderr, "chunk size is not as expected. Got dims=(%llu,%llu,%llu)\n", + (unsigned long long)chunk_dims[0], (unsigned long long)chunk_dims[1], + (unsigned long long)chunk_dims[2]); + return -1; + } + + /* allocate space for data buffer 1 X dims[1] X dims[2] of UC_CTYPE */ + memdims[0]=1; + memdims[1] = dims_g[1]; + memdims[2] = dims_g[2]; + if ((buffer=(UC_CTYPE*)HDmalloc((size_t)memdims[1]*(size_t)memdims[2]*sizeof(UC_CTYPE)))==NULL) { + fprintf(stderr, "malloc: failed\n"); + return -1; + }; + + /* + * Get dataset rank and dimension. + */ + f_sid = H5Dget_space(dsid); /* Get filespace handle first. */ + rank = H5Sget_simple_extent_ndims(f_sid); + if (rank != UC_RANK){ + fprintf(stderr, "rank(%d) of dataset does not match\n", rank); + return -1; + } + if (H5Sget_simple_extent_dims(f_sid, dims, NULL) < 0){ + fprintf(stderr, "H5Sget_simple_extent_dims got error\n"); + return -1; + } + printf("dataset rank %d, dimensions %llu x %llu x %llu\n", + rank, (unsigned long long)(dims[0]), (unsigned long long)(dims[1]), + (unsigned long long)(dims[2])); + /* verify that file space dims are as expected and are consistent with memory space dims */ + if (dims[0] != 0 || dims[1] != memdims[1] || dims[2] != memdims[2]){ + fprintf(stderr, "dataset is not empty. Got dims=(%llu,%llu,%llu)\n", + (unsigned long long)dims[0], (unsigned long long)dims[1], + (unsigned long long)dims[2]); + return -1; + } + + /* setup mem-space for buffer */ + if ((m_sid=H5Screate_simple(rank, memdims, NULL))<0){ + fprintf(stderr, "H5Screate_simple for memory failed\n"); + return -1; + }; + + /* write planes */ + count[0]=1; + count[1]=dims[1]; + count[2]=dims[2]; + for (i=0; i<nplanes_g; i++){ + /* fill buffer with value i+1 */ + bufptr = buffer; + for (j=0; j<dims[1]; j++) + for (k=0; k<dims[2]; k++) + *bufptr++ = i; + + /* extend the dataset by one for new plane */ + dims[0]=i+1; + if(H5Dset_extent(dsid, dims) < 0){ + fprintf(stderr, "H5Dset_extent failed\n"); + return -1; + } + + /* Get the dataset's dataspace */ + if((f_sid = H5Dget_space(dsid)) < 0){ + fprintf(stderr, "H5Dset_extent failed\n"); + return -1; + } + + start[0]=i; + /* Choose the next plane to write */ + if(H5Sselect_hyperslab(f_sid, H5S_SELECT_SET, start, NULL, count, NULL) < 0){ + fprintf(stderr, "Failed H5Sselect_hyperslab\n"); + return -1; + } + + /* Write plane to the dataset */ + if(H5Dwrite(dsid, UC_DATATYPE, m_sid, f_sid, H5P_DEFAULT, buffer) < 0){ + fprintf(stderr, "Failed H5Dwrite\n"); + return -1; + } + + /* Flush the dataset for every "chunkplanes_g" planes */ + if(!((i + 1) % (hsize_t)chunkplanes_g)) { + if(H5Dflush(dsid) < 0) { + fprintf(stderr, "Failed to H5Dflush dataset\n"); + return -1; + } + } + } + + if(H5Dflush(dsid) < 0) { + fprintf(stderr, "Failed to H5Dflush dataset\n"); + return -1; + } + + /* Enable mdc flushes for the dataset */ + /* Closing the dataset later will enable mdc flushes automatically if this is not done */ + if(disabled) + if(H5Oenable_mdc_flushes(dsid) < 0) { + fprintf(stderr, "Failed to H5Oenable_mdc_flushes\n"); + return -1; + } + + /* Done writing. Free/Close all resources including data file */ + HDfree(buffer); + + if(H5Dclose(dsid) < 0){ + fprintf(stderr, "Failed to close datasete\n"); + return -1; + } + if(H5Sclose(m_sid) < 0){ + fprintf(stderr, "Failed to close memory space\n"); + return -1; + } + if(H5Sclose(f_sid) < 0){ + fprintf(stderr, "Failed to close file space\n"); + return -1; + } + if(H5Pclose(fapl) < 0){ + fprintf(stderr, "Failed to property list\n"); + return -1; + } + if(H5Fclose(fid) < 0){ + fprintf(stderr, "Failed to close file id\n"); + return -1; + } + + return 0; +} /* write_file() */ + + + +/* Overall Algorithm: + * Parse options from user; + * Generate/pre-created test files needed and close it; + * Write to the file. + */ +int +main(int argc, char *argv[]) +{ + int ret_value = 0; + + /* initialization */ + if(setup_parameters(argc, argv) < 0) + Hgoto_error(1); + + /* ============*/ + /* Create file */ + /* ============*/ + printf("Creating skeleton data file for testing H5Odisable_mdc_flushes()...\n"); + if(create_file() < 0) { + fprintf(stderr, "***encounter error\n"); + Hgoto_error(1); + } /* end if */ + else + printf("File created.\n"); + + printf("writing to the file\n"); + if(write_file() < 0) { + fprintf(stderr, "write_file encountered error\n"); + Hgoto_error(1); + } + +done: + /* Print result and exit */ + if(ret_value != 0) + printf("Error(s) encountered\n"); + else + printf("All passed\n"); + + return(ret_value); +} + +#else /* H5_HAVE_FORK */ + +int +main(void) +{ + HDfprintf(stderr, "Non-POSIX platform. Skipping.\n"); + return EXIT_SUCCESS; +} /* end main() */ + +#endif /* H5_HAVE_FORK */ + diff --git a/test/vds_swmr.h b/test/vds_swmr.h new file mode 100644 index 0000000..c043fd6 --- /dev/null +++ b/test/vds_swmr.h @@ -0,0 +1,165 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +#ifndef VDS_SWMR_H +#define VDS_SWMR_H + +#include <hdf5.h> + +/* virtual dataset <---> source dataset mapping and sizes + + ***************** --+ + * A * K + ***************** --+ + * * | + * B * N + * * | + ***************** --+ + * C * + ***************** + * * + * D * + * * + ***************** + * E * + ***************** + * * + * F * + * * + ***************** + + | | + +-------M-------+ + + + dim[0] + / + / + / + -----> dim[2] + | + | + | + dim[1] + + + NOTE: This use case also checks for varying numbers of written planes. + Dataset A contains the full number of planes and each successive + dataset contains one fewer plane, down to the last dataset, which + contains zero planes. Each dataset is set to have an (unlimited + dimension) extent equal to the number of planes written, so the + "empty" regions will contain the VDS fill value. +*/ + + +/* All datasets are 3D */ +#define RANK 3 + +/* Lengths of string identifiers (file, dataset names, etc.) */ +#define NAME_LEN 32 + +/* Compression level */ +#define COMPRESSION_LEVEL 7 + +/* Number of source files */ +#define N_SOURCES 6 + +/* Dataset dimensions */ +#define SM_HEIGHT 2 /* K */ +#define LG_HEIGHT 4 /* N */ +#define SM_LG_HEIGHT 6 /* SM_HEIGHT + LG_HEIGHT */ +#define FULL_HEIGHT 18 /* (3 * K) + (3 * N) */ +#define HALF_HEIGHT 9 +#define WIDTH 8 /* M */ +#define HALF_WIDTH 4 + +/* Max number of planes in the dataset */ +#define N_MAX_PLANES H5S_UNLIMITED + +/* Number of planes each writer will write */ +#define N_PLANES_TO_WRITE 25 + +/* Dataset datatypes */ +#define SOURCE_DATATYPE H5T_STD_I32LE +#define VDS_DATATYPE H5T_STD_I32LE + +/* Starting size of datasets, both source and VDS */ +static hsize_t DIMS[N_SOURCES][RANK] = { + {0, SM_HEIGHT, WIDTH}, + {0, LG_HEIGHT, WIDTH}, + {0, SM_HEIGHT, WIDTH}, + {0, LG_HEIGHT, WIDTH}, + {0, SM_HEIGHT, WIDTH}, + {0, LG_HEIGHT, WIDTH} +}; +static hsize_t VDS_DIMS[RANK] = {0, FULL_HEIGHT, WIDTH}; + +/* Maximum size of datasets, both source and VDS. + * NOTE: Theoretical (i.e.: H5S_UNLIMITED), not the actual max + * number of planes written out by the writers before they stop. + * That number is specified separately. + */ +static hsize_t MAX_DIMS[N_SOURCES][RANK] = { + {N_MAX_PLANES, SM_HEIGHT, WIDTH}, + {N_MAX_PLANES, LG_HEIGHT, WIDTH}, + {N_MAX_PLANES, SM_HEIGHT, WIDTH}, + {N_MAX_PLANES, LG_HEIGHT, WIDTH}, + {N_MAX_PLANES, SM_HEIGHT, WIDTH}, + {N_MAX_PLANES, LG_HEIGHT, WIDTH} +}; +static hsize_t VDS_MAX_DIMS[RANK] = {N_MAX_PLANES, FULL_HEIGHT, WIDTH}; + +/* Planes */ +static hsize_t PLANES[N_SOURCES][RANK] = { + {1, SM_HEIGHT, WIDTH}, + {1, LG_HEIGHT, WIDTH}, + {1, SM_HEIGHT, WIDTH}, + {1, LG_HEIGHT, WIDTH}, + {1, SM_HEIGHT, WIDTH}, + {1, LG_HEIGHT, WIDTH} +}; +static hsize_t VDS_PLANE[RANK] = {1, FULL_HEIGHT, WIDTH}; + +/* File names for source datasets */ +static char FILE_NAMES[N_SOURCES][NAME_LEN] = { + {"vds_swmr_src_a.h5"}, + {"vds_swmr_src_b.h5"}, + {"vds_swmr_src_c.h5"}, + {"vds_swmr_src_d.h5"}, + {"vds_swmr_src_e.h5"}, + {"vds_swmr_src_f.h5"} +}; + +/* VDS file name */ +static char VDS_FILE_NAME[NAME_LEN] = "vds_swmr.h5"; + +/* Dataset names */ +static char SOURCE_DSET_NAME[NAME_LEN] = "source_dset"; +static char SOURCE_DSET_PATH[NAME_LEN] = "/source_dset"; +static char VDS_DSET_NAME[NAME_LEN] = "vds_dset"; + +/* Fill values */ +static int32_t FILL_VALUES[N_SOURCES] = { + -1, + -2, + -3, + -4, + -5, + -6 +}; +static int32_t VDS_FILL_VALUE = -9; + +#endif /* VDS_SWMR_H */ + diff --git a/test/vds_swmr_gen.c b/test/vds_swmr_gen.c new file mode 100644 index 0000000..60f081e --- /dev/null +++ b/test/vds_swmr_gen.c @@ -0,0 +1,178 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +#include "h5test.h" +#include "vds_swmr.h" + +int +main(void) +{ + hid_t faplid = -1; /* file access property list ID (all files) */ + + hid_t src_sid = -1; /* source dataset's dataspace ID */ + hid_t src_dcplid = -1; /* source dataset property list ID */ + + hid_t vds_sid = -1; /* VDS dataspace ID */ + hid_t vds_dcplid = -1; /* VDS dataset property list ID */ + + hid_t fid = -1; /* HDF5 file ID */ + hid_t did = -1; /* dataset ID */ + + hsize_t start[RANK]; /* starting point for hyperslab */ + int map_start = -1; /* starting point in the VDS map */ + + int i; /* iterator */ + + + /* Start by creating the virtual dataset (VDS) dataspace and creation + * property list. The individual source datasets are then created + * and the VDS map (stored in the VDS property list) is updated. + */ + + /* Create VDS dcpl */ + if((vds_dcplid = H5Pcreate(H5P_DATASET_CREATE)) < 0) + TEST_ERROR + if(H5Pset_fill_value(vds_dcplid, VDS_DATATYPE, + &VDS_FILL_VALUE) < 0) + TEST_ERROR + + /* Create VDS dataspace */ + if((vds_sid = H5Screate_simple(RANK, VDS_DIMS, + VDS_MAX_DIMS)) < 0) + TEST_ERROR + + /************************************ + * Create source files and datasets * + ************************************/ + + start[0] = 0; + start[1] = 0; + start[2] = 0; + map_start = 0; + + /* All SWMR files need to use the latest file format */ + if((faplid = H5Pcreate(H5P_FILE_ACCESS)) < 0) + TEST_ERROR + if(H5Pset_libver_bounds(faplid, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + TEST_ERROR + + for(i = 0; i < N_SOURCES; i++) { + + /* source dataset dcpl */ + if((src_dcplid = H5Pcreate(H5P_DATASET_CREATE)) < 0) + TEST_ERROR + if(H5Pset_chunk(src_dcplid, RANK, PLANES[i]) < 0) + TEST_ERROR + if(H5Pset_fill_value(src_dcplid, SOURCE_DATATYPE, + &FILL_VALUES[i]) < 0) + TEST_ERROR + + /* Use a mix of compressed and uncompressed datasets */ + if(0 != i % 2) + if(H5Pset_deflate(src_dcplid, COMPRESSION_LEVEL) < 0) + TEST_ERROR + + /* Create source file, dataspace, and dataset */ + if((fid = H5Fcreate(FILE_NAMES[i], H5F_ACC_TRUNC, + H5P_DEFAULT, faplid)) < 0) + TEST_ERROR + if((src_sid = H5Screate_simple(RANK, DIMS[i], + MAX_DIMS[i])) < 0) + TEST_ERROR + if((did = H5Dcreate2(fid, SOURCE_DSET_NAME, + SOURCE_DATATYPE, src_sid, + H5P_DEFAULT, src_dcplid, H5P_DEFAULT)) < 0) + TEST_ERROR + + /* set up hyperslabs for source and destination datasets */ + start[1] = 0; + if(H5Sselect_hyperslab(src_sid, H5S_SELECT_SET, start, NULL, + MAX_DIMS[i], NULL) < 0) + TEST_ERROR + start[1] = map_start; + if(H5Sselect_hyperslab(vds_sid, H5S_SELECT_SET, start, NULL, + MAX_DIMS[i], NULL) < 0) + TEST_ERROR + map_start += PLANES[i][1]; + + /* Add VDS mapping */ + if(H5Pset_virtual(vds_dcplid, vds_sid, FILE_NAMES[i], + SOURCE_DSET_PATH, src_sid) < 0) + TEST_ERROR + + /* close */ + if(H5Sclose(src_sid) < 0) + TEST_ERROR + if(H5Pclose(src_dcplid) < 0) + TEST_ERROR + if(H5Dclose(did) < 0) + TEST_ERROR + if(H5Fclose(fid) < 0) + TEST_ERROR + + } /* end for */ + + + /******************* + * Create VDS file * + *******************/ + + /* file */ + if((fid = H5Fcreate(VDS_FILE_NAME, H5F_ACC_TRUNC, + H5P_DEFAULT, faplid)) < 0) + TEST_ERROR + + /* dataset */ + if((did = H5Dcreate2(fid, VDS_DSET_NAME, VDS_DATATYPE, vds_sid, + H5P_DEFAULT, vds_dcplid, H5P_DEFAULT)) < 0) + TEST_ERROR + + /* close */ + if(H5Pclose(faplid) < 0) + TEST_ERROR + if(H5Pclose(vds_dcplid) < 0) + TEST_ERROR + if(H5Sclose(vds_sid) < 0) + TEST_ERROR + if(H5Dclose(did) < 0) + TEST_ERROR + if(H5Fclose(fid) < 0) + TEST_ERROR + + return EXIT_SUCCESS; + +error: + + H5E_BEGIN_TRY { + if(faplid >= 0) + (void)H5Pclose(faplid); + if(src_sid >= 0) + (void)H5Sclose(src_sid); + if(src_dcplid >= 0) + (void)H5Pclose(src_dcplid); + if(vds_sid >= 0) + (void)H5Sclose(vds_sid); + if(vds_dcplid >= 0) + (void)H5Pclose(vds_dcplid); + if(fid >= 0) + (void)H5Fclose(fid); + if(did >= 0) + (void)H5Dclose(did); + } H5E_END_TRY + + return EXIT_FAILURE; + +} /* end main */ + diff --git a/test/vds_swmr_reader.c b/test/vds_swmr_reader.c new file mode 100644 index 0000000..7ef2e90 --- /dev/null +++ b/test/vds_swmr_reader.c @@ -0,0 +1,142 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +#include "h5test.h" +#include "vds_swmr.h" + +int +main(void) +{ + hid_t fid = -1; /* HDF5 file ID */ + hid_t did = -1; /* dataset ID */ + hid_t msid = -1; /* memory dataspace ID */ + hid_t fsid = -1; /* file dataspace ID */ + + hsize_t start[RANK]; /* hyperslab start point */ + + int n_elements = 0; /* size of buffer (elements) */ + size_t size = 0; /* size of buffer (bytes) */ + int *buffer = NULL; /* data buffer */ + + int n_dims = -1; /* # dimensions in dataset */ + hsize_t dims[RANK]; /* current size of dataset */ + hsize_t max_dims[RANK]; /* max size of dataset */ + + hbool_t has_errors = FALSE;/* if the read data contains errors */ + + + /* Open the VDS file and dataset */ + if((fid = H5Fopen(VDS_FILE_NAME, H5F_ACC_RDONLY | H5F_ACC_SWMR_READ, H5P_DEFAULT)) < 0) + TEST_ERROR + if((did = H5Dopen2(fid, VDS_DSET_NAME, H5P_DEFAULT)) < 0) + TEST_ERROR + + /* Create the read buffer */ + n_elements = VDS_PLANE[1] * VDS_PLANE[2]; + size = n_elements * sizeof(int); + if(NULL == (buffer = (int *)HDmalloc(size))) + TEST_ERROR + + /* Create memory dataspace */ + if((msid = H5Screate_simple(RANK, VDS_PLANE, NULL)) < 0) + TEST_ERROR + + /* Read data until the dataset is full (via the writer) */ + do { + + /* Refresh metadata */ + if(H5Drefresh(did) < 0) + TEST_ERROR + + /* Get the dataset dimensions */ + if((fsid = H5Dget_space(did)) < 0) + TEST_ERROR + if(H5Sget_simple_extent_dims(fsid, dims, max_dims) < 0) + TEST_ERROR + + /* Check the reported size of the VDS */ + if((n_dims = H5Sget_simple_extent_ndims(fsid)) < 0) + TEST_ERROR + if(n_dims != RANK) + TEST_ERROR + if(H5Sget_simple_extent_dims(fsid, dims, max_dims) < 0) + TEST_ERROR + /* NOTE: Don't care what dims[0] is. */ + if(dims[1] != FULL_HEIGHT) + TEST_ERROR + if(dims[2] != WIDTH) + TEST_ERROR + if(max_dims[0] != H5S_UNLIMITED) + TEST_ERROR + if(max_dims[1] != FULL_HEIGHT) + TEST_ERROR + if(max_dims[2] != WIDTH) + TEST_ERROR + + /* Continue if there's nothing to read */ + if(0 == dims[0]) { + if(H5Sclose(fsid) < 0) + TEST_ERROR + continue; + } + + /* Read a plane from the VDS */ + /* At this time, we just make sure we can read planes without errors. */ + start[0] = dims[0] - 1; + start[1] = 0; + start[2] = 0; + if(H5Sselect_hyperslab(fsid, H5S_SELECT_SET, start, NULL, VDS_PLANE, NULL) < 0) + TEST_ERROR + if(H5Dread(did, H5T_NATIVE_INT, msid, fsid, H5P_DEFAULT, buffer) < 0) + TEST_ERROR + + if(H5Sclose(fsid) < 0) + TEST_ERROR + + } while (dims[0] < N_PLANES_TO_WRITE); + + /* Close file and dataset */ + if(H5Sclose(msid) < 0) + TEST_ERROR + if(H5Dclose(did) < 0) + TEST_ERROR + if(H5Fclose(fid) < 0) + TEST_ERROR + + HDfree(buffer); + + HDfprintf(stderr, "SWMR reader exited successfully\n"); + return EXIT_SUCCESS; + +error: + + H5E_BEGIN_TRY { + if(fid >= 0) + (void)H5Fclose(fid); + if(did >= 0) + (void)H5Dclose(did); + if(msid >= 0) + (void)H5Sclose(msid); + if(fsid >= 0) + (void)H5Sclose(fsid); + if(buffer != NULL) + HDfree(buffer); + } H5E_END_TRY + + HDfprintf(stderr, "ERROR: SWMR reader exited with errors\n"); + return EXIT_FAILURE; + +} /* end main */ + diff --git a/test/vds_swmr_writer.c b/test/vds_swmr_writer.c new file mode 100644 index 0000000..be7548c --- /dev/null +++ b/test/vds_swmr_writer.c @@ -0,0 +1,167 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * Copyright by the Board of Trustees of the University of Illinois. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the files COPYING and Copyright.html. COPYING can be found at the root * + * of the source code distribution tree; Copyright.html can be found at the * + * root level of an installed copy of the electronic HDF5 document set and * + * is linked from the top-level documents page. It can also be found at * + * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * + * access to either file, you may request a copy from help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + + +#include "h5test.h" +#include "vds_swmr.h" + +int +main(int argc, char *argv[]) +{ + int file_number = -1; /* Source file number */ + + hid_t fid = -1; /* HDF5 file ID */ + hid_t faplid = -1; /* file access property list ID */ + hid_t did = -1; /* dataset ID */ + hid_t msid = -1; /* memory dataspace ID */ + hid_t fsid = -1; /* file dataspace ID */ + + hsize_t extent[RANK]; /* dataset extents */ + hsize_t start[RANK]; /* hyperslab start point */ + + int *buffer = NULL; /* data buffer */ + int value = -1; /* value written to datasets */ + + hsize_t n_elements = 0; /* number of elements in a plane */ + + hsize_t i; /* iterator */ + hsize_t j; /* iterator */ + + + /****************************** + * Fill a source dataset file * + ******************************/ + + /* The file number is passed on the command line. + * This is an integer index into the FILE_NAMES array. + */ + if(argc != 2) { + HDfprintf(stderr, "ERROR: Must pass the source file number on the command line.\n"); + return EXIT_FAILURE; + } + + file_number = HDatoi(argv[1]); + if(file_number < 0 || file_number >= N_SOURCES) + TEST_ERROR + + /* Open the source file and dataset */ + /* All SWMR files need to use the latest file format */ + if((faplid = H5Pcreate(H5P_FILE_ACCESS)) < 0) + TEST_ERROR + if(H5Pset_libver_bounds(faplid, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) + TEST_ERROR + if((fid = H5Fopen(FILE_NAMES[file_number], H5F_ACC_RDWR | H5F_ACC_SWMR_WRITE, faplid)) < 0) + TEST_ERROR + if((did = H5Dopen2(fid, SOURCE_DSET_PATH, H5P_DEFAULT)) < 0) + TEST_ERROR + + + /* Create a data buffer that represents a plane */ + n_elements = PLANES[file_number][1] * PLANES[file_number][2]; + if(NULL == (buffer = (int *)HDmalloc(n_elements * sizeof(int)))) + TEST_ERROR + + /* Create the memory dataspace */ + if((msid = H5Screate_simple(RANK, PLANES[file_number], NULL)) < 0) + TEST_ERROR + + /* Write planes to the dataset */ + for(i = 0; i < N_PLANES_TO_WRITE; i++) { + + unsigned delay; /* Time interval between plane writes */ + + /* Cork the dataset's metadata in the cache */ + if(H5Odisable_mdc_flushes(did) < 0) + TEST_ERROR + + /* Set the dataset's extent. This is inefficient but that's ok here. */ + extent[0] = i + 1; + extent[1] = PLANES[file_number][1]; + extent[2] = PLANES[file_number][2]; + if(H5Dset_extent(did, extent) < 0) + TEST_ERROR + + /* Get the file dataspace */ + if((fsid = H5Dget_space(did)) < 0) + TEST_ERROR + + /* Each plane is filled with the plane number as a data value. */ + value = (((int)i + 1) * 10) + (int)i; + for(j = 0; j < n_elements; j++) + buffer[j] = value; + + /* Set up the hyperslab for writing. */ + start[0] = i; + start[1] = 0; + start[2] = 0; + if(H5Sselect_hyperslab(fsid, H5S_SELECT_SET, start, NULL, PLANES[file_number], NULL) < 0) + TEST_ERROR + + /* Write the plane to the dataset. */ + if(H5Dwrite(did, H5T_NATIVE_INT, msid, fsid, H5P_DEFAULT, buffer) < 0) + TEST_ERROR + + /* Uncork the dataset's metadata from the cache */ + if(H5Oenable_mdc_flushes(did) < 0) + TEST_ERROR + + /* Wait one second between writing planes */ + delay = HDtime(0) + 1; + while(HDtime(0) < delay) + ; + + /* Flush */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + TEST_ERROR + + } /* end for */ + + if(H5Pclose(faplid) < 0) + TEST_ERROR + if(H5Sclose(msid) < 0) + TEST_ERROR + if(H5Sclose(fsid) < 0) + TEST_ERROR + if(H5Dclose(did) < 0) + TEST_ERROR + if(H5Fclose(fid) < 0) + TEST_ERROR + HDfree(buffer); + + HDfprintf(stderr, "SWMR writer exited successfully\n"); + return EXIT_SUCCESS; + +error: + + H5E_BEGIN_TRY { + if(fid >= 0) + (void)H5Fclose(fid); + if(faplid >= 0) + (void)H5Pclose(faplid); + if(did >= 0) + (void)H5Dclose(did); + if(msid >= 0) + (void)H5Sclose(msid); + if(fsid >= 0) + (void)H5Sclose(fsid); + if(buffer != NULL) + HDfree(buffer); + } H5E_END_TRY + + HDfprintf(stderr, "ERROR: SWMR writer exited with errors\n"); + return EXIT_FAILURE; + +} /* end main */ + |