diff options
Diffstat (limited to 'testpar/CMakeTests.cmake')
| -rw-r--r-- | testpar/CMakeTests.cmake | 188 |
1 files changed, 139 insertions, 49 deletions
diff --git a/testpar/CMakeTests.cmake b/testpar/CMakeTests.cmake index 3716ee6..26968de 100644 --- a/testpar/CMakeTests.cmake +++ b/testpar/CMakeTests.cmake @@ -1,62 +1,152 @@ +# +# Copyright by The HDF Group. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the COPYING file, which can be found at the root of the source code +# distribution tree, or in https://www.hdfgroup.org/licenses. +# If you do not have access to either file, you may request a copy from +# help@hdfgroup.org. +# ############################################################################## ############################################################################## ### T E S T I N G ### ############################################################################## ############################################################################## +# Remove any output file left over from previous test run +add_test ( + NAME MPI_TEST-clear-testphdf5-objects + COMMAND ${CMAKE_COMMAND} -E remove ParaTest.h5 + WORKING_DIRECTORY ${HDF5_TEST_PAR_BINARY_DIR} +) +set_tests_properties (MPI_TEST-clear-testphdf5-objects PROPERTIES FIXTURES_SETUP par_clear_testphdf5) +add_test ( + NAME MPI_TEST-clean-testphdf5-objects + COMMAND ${CMAKE_COMMAND} -E remove ParaTest.h5 + WORKING_DIRECTORY ${HDF5_TEST_PAR_BINARY_DIR} +) +set_tests_properties (MPI_TEST-clean-testphdf5-objects PROPERTIES FIXTURES_CLEANUP par_clear_testphdf5) -add_test (NAME TEST_PAR_testphdf5 COMMAND ${MPIEXEC} ${MPIEXEC_PREFLAGS} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} ${MPIEXEC_POSTFLAGS} $<TARGET_FILE:testphdf5>) +set (SKIP_tests + cchunk1 + cchunk2 + cchunk3 + cchunk4 + ecdsetw + eidsetw2 + selnone + cngrpw-ingrpr + cschunkw + ccchunkw + tldsc + actualio + MC_coll_MD_read +) +set (SKIP_testphdf5 "") +foreach (skiptest ${SKIP_tests}) + set (SKIP_testphdf5 "${SKIP_testphdf5};-x;${skiptest}") +endforeach () -foreach (testp ${H5P_TESTS}) - add_test (NAME TEST_PAR_${testp} COMMAND ${MPIEXEC} ${MPIEXEC_PREFLAGS} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} ${MPIEXEC_POSTFLAGS} $<TARGET_FILE:${testp}>) -endforeach (testp ${H5P_TESTS}) +add_test (NAME MPI_TEST_testphdf5 COMMAND ${MPIEXEC_EXECUTABLE} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} ${MPIEXEC_PREFLAGS} $<TARGET_FILE:testphdf5> ${MPIEXEC_POSTFLAGS} ${SKIP_testphdf5}) +set_tests_properties (MPI_TEST_testphdf5 PROPERTIES + FIXTURES_REQUIRED par_clear_testphdf5 + ENVIRONMENT "HDF5_ALARM_SECONDS=3600;srcdir=${HDF5_TEST_PAR_BINARY_DIR}" + WORKING_DIRECTORY ${HDF5_TEST_PAR_BINARY_DIR} +) +if (last_test) + set_tests_properties (MPI_TEST_testphdf5 PROPERTIES DEPENDS ${last_test}) +endif () +set (last_test "MPI_TEST_testphdf5") -# The following will only be correct on windows shared -#set_tests_properties (TEST_PAR_t_pflush1 PROPERTIES WILL_FAIL "true") -set_property (TEST TEST_PAR_t_pflush1 PROPERTY PASS_REGULAR_EXPRESSION "PASSED") -set_tests_properties (TEST_PAR_t_pflush2 PROPERTIES DEPENDS TEST_PAR_t_pflush1) +#execute the skipped tests +foreach (skiptest ${SKIP_tests}) + add_test (NAME MPI_TEST_testphdf5_${skiptest} COMMAND ${MPIEXEC_EXECUTABLE} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} ${MPIEXEC_PREFLAGS} $<TARGET_FILE:testphdf5> ${MPIEXEC_POSTFLAGS} -o ${skiptest}) + set_tests_properties (MPI_TEST_testphdf5_${skiptest} PROPERTIES + FIXTURES_REQUIRED par_clear_testphdf5 + ENVIRONMENT "HDF5_ALARM_SECONDS=3600;srcdir=${HDF5_TEST_PAR_BINARY_DIR}" + WORKING_DIRECTORY ${HDF5_TEST_PAR_BINARY_DIR} + ) + if (last_test) + set_tests_properties (MPI_TEST_testphdf5_${skiptest} PROPERTIES DEPENDS ${last_test}) + endif () + set (last_test "MPI_TEST_testphdf5_${skiptest}") +endforeach () -if (HDF5_TEST_VFD) +#if (HDF5_OPENMPI_VERSION_SKIP) +# list (REMOVE_ITEM H5P_TESTS t_shapesame) +#endif () - set (VFD_LIST - sec2 - stdio - core - split - multi - family - ) +# do not test until new version is added +list (REMOVE_ITEM H5P_TESTS t_cache_image) + +set (test_par_CLEANFILES + t_cache_image_00.h5 + t_cache_image_01.h5 + t_cache_image_02.h5 + flush.h5 + noflush.h5 + reloc_t_pread_data_file.h5 + reloc_t_pread_group_0_file.h5 + reloc_t_pread_group_1_file.h5 + shutdown.h5 + after_mpi_fin.h5 + #the following should have been removed by the programs + bigio_test.h5 + CacheTestDummy.h5 + t_filters_parallel.h5 + MPItest.h5 + ShapeSameTest.h5 + test_subfiling_basic_create.h5 + test_subfiling_config_file.h5 + test_subfiling_stripe_sizes.h5 + test_subfiling_read_different_stripe_sizes.h5 + test_subfiling_precreate_rank_0.h5 + test_subfiling_write_many_read_one.h5 + test_subfiling_write_many_read_few.h5 + test_subfiling_h5fuse.h5 +) - set (H5P_VFD_TESTS - t_pflush1 - t_pflush2 +# Remove any output file left over from previous test run +add_test ( + NAME MPI_TEST-clear-objects + COMMAND ${CMAKE_COMMAND} -E remove ${test_par_CLEANFILES} + WORKING_DIRECTORY ${HDF5_TEST_PAR_BINARY_DIR} +) +set_tests_properties (MPI_TEST-clear-objects PROPERTIES FIXTURES_SETUP par_clear_objects) +add_test ( + NAME MPI_TEST-clean-objects + COMMAND ${CMAKE_COMMAND} -E remove ${test_par_CLEANFILES} + WORKING_DIRECTORY ${HDF5_TEST_PAR_BINARY_DIR} +) +set_tests_properties (MPI_TEST-clean-objects PROPERTIES FIXTURES_CLEANUP par_clear_objects) + +foreach (h5_testp ${H5P_TESTS}) + add_test (NAME MPI_TEST_${h5_testp} COMMAND ${MPIEXEC_EXECUTABLE} ${MPIEXEC_NUMPROC_FLAG} ${MPIEXEC_MAX_NUMPROCS} ${MPIEXEC_PREFLAGS} $<TARGET_FILE:${h5_testp}> ${MPIEXEC_POSTFLAGS}) + set_tests_properties (MPI_TEST_${h5_testp} PROPERTIES + FIXTURES_REQUIRED par_clear_objects + ENVIRONMENT "HDF5_ALARM_SECONDS=3600;srcdir=${HDF5_TEST_PAR_BINARY_DIR}" + WORKING_DIRECTORY ${HDF5_TEST_PAR_BINARY_DIR} ) - - if (DIRECT_VFD) - set (VFD_LIST ${VFD_LIST} direct) - endif (DIRECT_VFD) - - MACRO (ADD_VFD_TEST vfdname resultcode) - if (NOT HDF5_ENABLE_USING_MEMCHECKER) - foreach (test ${H5P_VFD_TESTS}) - add_test ( - NAME TEST_PAR_VFD-${vfdname}-${test} - COMMAND "${CMAKE_COMMAND}" - -D "TEST_PROGRAM=$<TARGET_FILE:${test}>" - -D "TEST_ARGS:STRING=" - -D "TEST_VFD:STRING=${vfdname}" - -D "TEST_EXPECT=${resultcode}" - -D "TEST_OUTPUT=${test}" - -D "TEST_FOLDER=${PROJECT_BINARY_DIR}" - -P "${HDF_RESOURCES_DIR}/vfdTest.cmake" - ) - endforeach (test ${H5P_VFD_TESTS}) - endif (NOT HDF5_ENABLE_USING_MEMCHECKER) - ENDMACRO (ADD_VFD_TEST) - - # Run test with different Virtual File Driver - foreach (vfd ${VFD_LIST}) - ADD_VFD_TEST (${vfd} 0) - endforeach (vfd ${VFD_LIST}) - -endif (HDF5_TEST_VFD) + if (last_test) + set_tests_properties (MPI_TEST_${h5_testp} PROPERTIES DEPENDS ${last_test}) + endif () + set (last_test "MPI_TEST_${h5_testp}") +endforeach () + +# The t_pflush1 test is hard-coded to fail. +set_tests_properties (MPI_TEST_t_pflush1 PROPERTIES WILL_FAIL "true") +#set_property (TEST MPI_TEST_t_pflush1 PROPERTY PASS_REGULAR_EXPRESSION "PASSED") +set_tests_properties (MPI_TEST_t_pflush2 PROPERTIES DEPENDS MPI_TEST_t_pflush1) +set_tests_properties (MPI_TEST_t_prestart PROPERTIES DEPENDS MPI_TEST_t_pshutdown) + +############################################################################## +############################################################################## +### V F D T E S T S ### +############################################################################## +############################################################################## + +if (HDF5_TEST_VFD) + include (CMakeVFDTests.cmake) +endif () |