diff options
Diffstat (limited to 'testpar/t_2Gio.c')
-rw-r--r-- | testpar/t_2Gio.c | 50 |
1 files changed, 25 insertions, 25 deletions
diff --git a/testpar/t_2Gio.c b/testpar/t_2Gio.c index d5b9038..ac031fc 100644 --- a/testpar/t_2Gio.c +++ b/testpar/t_2Gio.c @@ -33,7 +33,7 @@ #include "mpi.h" /* For this test, we don't want to inherit the RANK definition - * from testphdf5.h. We'll define MAX_RANK to accomodate 3D arrays + * from testphdf5.h. We'll define MAX_RANK to accommodate 3D arrays * and use that definition rather than RANK. */ #ifndef MAX_RANK @@ -3323,7 +3323,7 @@ none_selection_chunk(void) * Simple independent I/O. This tests that the defaults are properly set. * * TEST_ACTUAL_IO_RESET: - * Perfroms collective and then independent I/O wit hthe same dxpl to + * Performs collective and then independent I/O with hthe same dxpl to * make sure the peroperty is correctly reset to the default on each use. * Specifically, this test runs TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE * (The most complex case that works on all builds) and then performs @@ -3332,7 +3332,7 @@ none_selection_chunk(void) * Note: DIRECT_MULTI_CHUNK_MIX and DIRECT_MULTI_CHUNK_MIX_DISAGREE * is not needed as they are covered by DIRECT_CHUNK_MIX and * MULTI_CHUNK_MIX_DISAGREE cases. _DIRECT_ cases are only for testing - * path way to multi-chunk-io by H5FD_MPIO_CHUNK_MULTI_IO insted of num-threshold. + * path way to multi-chunk-io by H5FD_MPIO_CHUNK_MULTI_IO instead of num-threshold. * * Modification: * - Refctore to remove multi-chunk-without-opimization test and update for @@ -3520,7 +3520,7 @@ test_actual_io_mode(int selection_mode) break; /* RESET tests that the properties are properly reset to defaults each time I/O is - * performed. To acheive this, we have RESET perform collective I/O (which would change + * performed. To achieve this, we have RESET perform collective I/O (which would change * the values from the defaults) followed by independent I/O (which should report the * default values). RESET doesn't need to have a unique selection, so we reuse * MULTI_CHUMK_MIX_DISAGREE, which was chosen because it is a complex case that works @@ -3536,7 +3536,7 @@ test_actual_io_mode(int selection_mode) * assgigned collective I/O, while each other process gets independent I/O. * Since the root process with only access the first chunk, it will report * collective I/O. The subsequent processes will access the first chunk - * collectively, and their other chunk indpendently, reporting mixed I/O. + * collectively, and their other chunk independently, reporting mixed I/O. */ if (mpi_rank == 0) { @@ -3651,7 +3651,7 @@ test_actual_io_mode(int selection_mode) ret = H5Pset_dxpl_mpio_chunk_opt_num(dxpl_write, (unsigned)mpi_size * 2); VRFY((ret >= 0), "H5Pset_dxpl_mpio_chunk_opt_num succeeded"); - /* set this to manipulate testing senario about allocating processes + /* set this to manipulate testing scenario about allocating processes * to chunks */ ret = H5Pset_dxpl_mpio_chunk_opt_ratio(dxpl_write, (unsigned)99); VRFY((ret >= 0), "H5Pset_dxpl_mpio_chunk_opt_ratio succeeded"); @@ -3675,12 +3675,12 @@ test_actual_io_mode(int selection_mode) H5Eprint2(H5E_DEFAULT, stdout); VRFY((ret >= 0), "H5Dwrite() dataset multichunk write succeeded"); - /* Retreive Actual io valuess */ + /* Retrieve Actual io values */ ret = H5Pget_mpio_actual_io_mode(dxpl_write, &actual_io_mode_write); - VRFY((ret >= 0), "retriving actual io mode suceeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_write, &actual_chunk_opt_mode_write); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); /* Read */ ret = H5Dread(dataset, data_type, mem_space, file_space, dxpl_read, buffer); @@ -3688,12 +3688,12 @@ test_actual_io_mode(int selection_mode) H5Eprint2(H5E_DEFAULT, stdout); VRFY((ret >= 0), "H5Dread() dataset multichunk read succeeded"); - /* Retreive Actual io values */ + /* Retrieve Actual io values */ ret = H5Pget_mpio_actual_io_mode(dxpl_read, &actual_io_mode_read); - VRFY((ret >= 0), "retriving actual io mode succeeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_read, &actual_chunk_opt_mode_read); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); /* Check write vs read */ VRFY((actual_io_mode_read == actual_io_mode_write), @@ -3714,7 +3714,7 @@ test_actual_io_mode(int selection_mode) actual_io_mode_write); } - /* To test that the property is succesfully reset to the default, we perform some + /* To test that the property is successfully reset to the default, we perform some * independent I/O after the collective I/O */ if (selection_mode == TEST_ACTUAL_IO_RESET) { @@ -3731,9 +3731,9 @@ test_actual_io_mode(int selection_mode) /* Check Properties */ ret = H5Pget_mpio_actual_io_mode(dxpl_write, &actual_io_mode_write); - VRFY((ret >= 0), "retriving actual io mode succeeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_write, &actual_chunk_opt_mode_write); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); VRFY(actual_chunk_opt_mode_write == H5D_MPIO_NO_CHUNK_OPTIMIZATION, "actual_chunk_opt_mode has correct value for reset write (independent)"); @@ -3746,9 +3746,9 @@ test_actual_io_mode(int selection_mode) /* Check Properties */ ret = H5Pget_mpio_actual_io_mode(dxpl_read, &actual_io_mode_read); - VRFY((ret >= 0), "retriving actual io mode succeeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_read, &actual_chunk_opt_mode_read); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); VRFY(actual_chunk_opt_mode_read == H5D_MPIO_NO_CHUNK_OPTIMIZATION, "actual_chunk_opt_mode has correct value for reset read (independent)"); @@ -3794,11 +3794,11 @@ actual_io_mode_tests(void) test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_IND); test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_COL); - /* The Multi Chunk Mixed test requires atleast three processes. */ + /* The Multi Chunk Mixed test requires at least three processes. */ if (mpi_size > 2) test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX); else - HDfprintf(stdout, "Multi Chunk Mixed test requires 3 proceses minimum\n"); + HDfprintf(stdout, "Multi Chunk Mixed test requires 3 processes minimum\n"); test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE); @@ -3842,7 +3842,7 @@ actual_io_mode_tests(void) * Test for Data Type Conversion as the cause of breaking collective I/O. * * TEST_DATA_TRANSFORMS: - * Test for Data Transfrom feature as the cause of breaking collective I/O. + * Test for Data Transform feature as the cause of breaking collective I/O. * * TEST_NOT_SIMPLE_OR_SCALAR_DATASPACES: * Test for NULL dataspace as the cause of breaking collective I/O. @@ -4004,7 +4004,7 @@ test_no_collective_cause_mode(int selection_mode) } if (selection_mode & TEST_DATA_TRANSFORMS) { - test_name = "Broken Collective I/O - DATA Transfroms"; + test_name = "Broken Collective I/O - DATA Transforms"; no_collective_cause_local_expected |= H5D_MPIO_DATA_TRANSFORMS; no_collective_cause_global_expected |= H5D_MPIO_DATA_TRANSFORMS; } @@ -4102,7 +4102,7 @@ test_no_collective_cause_mode(int selection_mode) /* Get the cause of broken collective I/O */ ret = H5Pget_mpio_no_collective_cause(dxpl_write, &no_collective_cause_local_write, &no_collective_cause_global_write); - VRFY((ret >= 0), "retriving no collective cause succeeded"); + VRFY((ret >= 0), "retrieving no collective cause succeeded"); /*--------------------- * Test Read access @@ -4122,7 +4122,7 @@ test_no_collective_cause_mode(int selection_mode) /* Get the cause of broken collective I/O */ ret = H5Pget_mpio_no_collective_cause(dxpl_read, &no_collective_cause_local_read, &no_collective_cause_global_read); - VRFY((ret >= 0), "retriving no collective cause succeeded"); + VRFY((ret >= 0), "retrieving no collective cause succeeded"); /* Check write vs read */ VRFY((no_collective_cause_local_read == no_collective_cause_local_write), @@ -4368,7 +4368,7 @@ test_no_collective_cause_mode_filter(int selection_mode) /* Get the cause of broken collective I/O */ ret = H5Pget_mpio_no_collective_cause (dxpl, &no_collective_cause_local_read, &no_collective_cause_global_read); - VRFY((ret >= 0), "retriving no collective cause succeeded" ); + VRFY((ret >= 0), "retrieving no collective cause succeeded" ); /* Test values */ HDmemset (message, 0, sizeof (message)); @@ -4547,7 +4547,7 @@ dataset_atomicity(void) /* file locking allows only one file open (serial) for writing */ if (MAINPROCESS) { fid = H5Fopen(filename, H5F_ACC_RDWR, H5P_DEFAULT); - VRFY((fid >= 0), "H5Fopen succeeed"); + VRFY((fid >= 0), "H5Fopen succeeded"); } /* should fail */ |