diff options
Diffstat (limited to 'testpar/t_dset.c')
| -rw-r--r-- | testpar/t_dset.c | 343 |
1 files changed, 36 insertions, 307 deletions
diff --git a/testpar/t_dset.c b/testpar/t_dset.c index bbd4b28..8616bef 100644 --- a/testpar/t_dset.c +++ b/testpar/t_dset.c @@ -2605,7 +2605,7 @@ compress_readAll(void) nerrors++; } -#if MPI_VERSION >= 3 +#ifdef H5_HAVE_PARALLEL_FILTERED_WRITES ret = H5Dwrite(dataset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, xfer_plist, data_read); VRFY((ret >= 0), "H5Dwrite succeeded"); #endif @@ -2881,7 +2881,7 @@ none_selection_chunk(void) * Simple independent I/O. This tests that the defaults are properly set. * * TEST_ACTUAL_IO_RESET: - * Perfroms collective and then independent I/O wit hthe same dxpl to + * Performs collective and then independent I/O with hthe same dxpl to * make sure the peroperty is correctly reset to the default on each use. * Specifically, this test runs TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE * (The most complex case that works on all builds) and then performs @@ -2890,7 +2890,7 @@ none_selection_chunk(void) * Note: DIRECT_MULTI_CHUNK_MIX and DIRECT_MULTI_CHUNK_MIX_DISAGREE * is not needed as they are covered by DIRECT_CHUNK_MIX and * MULTI_CHUNK_MIX_DISAGREE cases. _DIRECT_ cases are only for testing - * path way to multi-chunk-io by H5FD_MPIO_CHUNK_MULTI_IO insted of num-threshold. + * path way to multi-chunk-io by H5FD_MPIO_CHUNK_MULTI_IO instead of num-threshold. * * Modification: * - Refctore to remove multi-chunk-without-opimization test and update for @@ -2905,12 +2905,12 @@ none_selection_chunk(void) static void test_actual_io_mode(int selection_mode) { - H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_write = -1; - H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_read = -1; - H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_expected = -1; - H5D_mpio_actual_io_mode_t actual_io_mode_write = -1; - H5D_mpio_actual_io_mode_t actual_io_mode_read = -1; - H5D_mpio_actual_io_mode_t actual_io_mode_expected = -1; + H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_write = H5D_MPIO_NO_CHUNK_OPTIMIZATION; + H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_read = H5D_MPIO_NO_CHUNK_OPTIMIZATION; + H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_expected = H5D_MPIO_NO_CHUNK_OPTIMIZATION; + H5D_mpio_actual_io_mode_t actual_io_mode_write = H5D_MPIO_NO_COLLECTIVE; + H5D_mpio_actual_io_mode_t actual_io_mode_read = H5D_MPIO_NO_COLLECTIVE; + H5D_mpio_actual_io_mode_t actual_io_mode_expected = H5D_MPIO_NO_COLLECTIVE; const char * filename; const char * test_name; hbool_t direct_multi_chunk_io; @@ -3078,7 +3078,7 @@ test_actual_io_mode(int selection_mode) break; /* RESET tests that the properties are properly reset to defaults each time I/O is - * performed. To acheive this, we have RESET perform collective I/O (which would change + * performed. To achieve this, we have RESET perform collective I/O (which would change * the values from the defaults) followed by independent I/O (which should report the * default values). RESET doesn't need to have a unique selection, so we reuse * MULTI_CHUMK_MIX_DISAGREE, which was chosen because it is a complex case that works @@ -3094,7 +3094,7 @@ test_actual_io_mode(int selection_mode) * assgigned collective I/O, while each other process gets independent I/O. * Since the root process with only access the first chunk, it will report * collective I/O. The subsequent processes will access the first chunk - * collectively, and their other chunk indpendently, reporting mixed I/O. + * collectively, and their other chunk independently, reporting mixed I/O. */ if (mpi_rank == 0) { @@ -3163,8 +3163,8 @@ test_actual_io_mode(int selection_mode) default: test_name = "Undefined Selection Mode"; - actual_chunk_opt_mode_expected = -1; - actual_io_mode_expected = -1; + actual_chunk_opt_mode_expected = H5D_MPIO_NO_CHUNK_OPTIMIZATION; + actual_io_mode_expected = H5D_MPIO_NO_COLLECTIVE; break; } @@ -3209,7 +3209,7 @@ test_actual_io_mode(int selection_mode) ret = H5Pset_dxpl_mpio_chunk_opt_num(dxpl_write, (unsigned)mpi_size * 2); VRFY((ret >= 0), "H5Pset_dxpl_mpio_chunk_opt_num succeeded"); - /* set this to manipulate testing senario about allocating processes + /* set this to manipulate testing scenario about allocating processes * to chunks */ ret = H5Pset_dxpl_mpio_chunk_opt_ratio(dxpl_write, (unsigned)99); VRFY((ret >= 0), "H5Pset_dxpl_mpio_chunk_opt_ratio succeeded"); @@ -3233,12 +3233,12 @@ test_actual_io_mode(int selection_mode) H5Eprint2(H5E_DEFAULT, stdout); VRFY((ret >= 0), "H5Dwrite() dataset multichunk write succeeded"); - /* Retreive Actual io valuess */ + /* Retrieve Actual io values */ ret = H5Pget_mpio_actual_io_mode(dxpl_write, &actual_io_mode_write); - VRFY((ret >= 0), "retriving actual io mode suceeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_write, &actual_chunk_opt_mode_write); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); /* Read */ ret = H5Dread(dataset, data_type, mem_space, file_space, dxpl_read, buffer); @@ -3246,12 +3246,12 @@ test_actual_io_mode(int selection_mode) H5Eprint2(H5E_DEFAULT, stdout); VRFY((ret >= 0), "H5Dread() dataset multichunk read succeeded"); - /* Retreive Actual io values */ + /* Retrieve Actual io values */ ret = H5Pget_mpio_actual_io_mode(dxpl_read, &actual_io_mode_read); - VRFY((ret >= 0), "retriving actual io mode succeeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_read, &actual_chunk_opt_mode_read); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); /* Check write vs read */ VRFY((actual_io_mode_read == actual_io_mode_write), @@ -3272,7 +3272,7 @@ test_actual_io_mode(int selection_mode) actual_io_mode_write); } - /* To test that the property is succesfully reset to the default, we perform some + /* To test that the property is successfully reset to the default, we perform some * independent I/O after the collective I/O */ if (selection_mode == TEST_ACTUAL_IO_RESET) { @@ -3289,9 +3289,9 @@ test_actual_io_mode(int selection_mode) /* Check Properties */ ret = H5Pget_mpio_actual_io_mode(dxpl_write, &actual_io_mode_write); - VRFY((ret >= 0), "retriving actual io mode succeeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_write, &actual_chunk_opt_mode_write); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); VRFY(actual_chunk_opt_mode_write == H5D_MPIO_NO_CHUNK_OPTIMIZATION, "actual_chunk_opt_mode has correct value for reset write (independent)"); @@ -3304,9 +3304,9 @@ test_actual_io_mode(int selection_mode) /* Check Properties */ ret = H5Pget_mpio_actual_io_mode(dxpl_read, &actual_io_mode_read); - VRFY((ret >= 0), "retriving actual io mode succeeded"); + VRFY((ret >= 0), "retrieving actual io mode succeeded"); ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_read, &actual_chunk_opt_mode_read); - VRFY((ret >= 0), "retriving actual chunk opt mode succeeded"); + VRFY((ret >= 0), "retrieving actual chunk opt mode succeeded"); VRFY(actual_chunk_opt_mode_read == H5D_MPIO_NO_CHUNK_OPTIMIZATION, "actual_chunk_opt_mode has correct value for reset read (independent)"); @@ -3359,11 +3359,11 @@ actual_io_mode_tests(void) test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_IND); test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_COL); - /* The Multi Chunk Mixed test requires atleast three processes. */ + /* The Multi Chunk Mixed test requires at least three processes. */ if (mpi_size > 2) test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX); else - HDfprintf(stdout, "Multi Chunk Mixed test requires 3 proceses minimum\n"); + HDfprintf(stdout, "Multi Chunk Mixed test requires 3 processes minimum\n"); test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE); @@ -3407,7 +3407,7 @@ actual_io_mode_tests(void) * Test for Data Type Conversion as the cause of breaking collective I/O. * * TEST_DATA_TRANSFORMS: - * Test for Data Transfrom feature as the cause of breaking collective I/O. + * Test for Data Transform feature as the cause of breaking collective I/O. * * TEST_NOT_SIMPLE_OR_SCALAR_DATASPACES: * Test for NULL dataspace as the cause of breaking collective I/O. @@ -3418,12 +3418,6 @@ actual_io_mode_tests(void) * TEST_NOT_CONTIGUOUS_OR_CHUNKED_DATASET_EXTERNAL: * Test for Externl-File storage as the cause of breaking collective I/O. * - * TEST_FILTERS: - * Test for using filter (checksum) as the cause of breaking collective I/O. - * Note: TEST_FILTERS mode will not work until H5Dcreate and H5write is supported for mpio and filter - * feature. Use test_no_collective_cause_mode_filter() function instead. - * - * * Programmer: Jonathan Kim * Date: Aug, 2012 */ @@ -3465,9 +3459,6 @@ test_no_collective_cause_mode(int selection_mode) hid_t file_space = -1; hsize_t chunk_dims[RANK]; herr_t ret; -#ifdef LATER /* fletcher32 */ - H5Z_filter_t filter_info; -#endif /* LATER */ /* set to global value as default */ int l_facc_type = facc_type; char message[256]; @@ -3499,21 +3490,6 @@ test_no_collective_cause_mode(int selection_mode) is_chunked = 0; } -#ifdef LATER /* fletcher32 */ - if (selection_mode & TEST_FILTERS) { - ret = H5Zfilter_avail(H5Z_FILTER_FLETCHER32); - VRFY((ret >= 0), "Fletcher32 filter is available.\n"); - - ret = H5Zget_filter_info(H5Z_FILTER_FLETCHER32, &filter_info); - VRFY(((filter_info & H5Z_FILTER_CONFIG_ENCODE_ENABLED) || - (filter_info & H5Z_FILTER_CONFIG_DECODE_ENABLED)), - "Fletcher32 filter encoding and decoding available.\n"); - - ret = H5Pset_fletcher32(dcpl); - VRFY((ret >= 0), "set filter (flecher32) succeeded"); - } -#endif /* LATER */ - if (selection_mode & TEST_NOT_SIMPLE_OR_SCALAR_DATASPACES) { sid = H5Screate(H5S_NULL); VRFY((sid >= 0), "H5Screate_simple succeeded"); @@ -3571,7 +3547,7 @@ test_no_collective_cause_mode(int selection_mode) } if (selection_mode & TEST_DATA_TRANSFORMS) { - test_name = "Broken Collective I/O - DATA Transfroms"; + test_name = "Broken Collective I/O - DATA Transforms"; no_collective_cause_local_expected |= H5D_MPIO_DATA_TRANSFORMS; no_collective_cause_global_expected |= H5D_MPIO_DATA_TRANSFORMS; } @@ -3589,14 +3565,6 @@ test_no_collective_cause_mode(int selection_mode) no_collective_cause_global_expected |= H5D_MPIO_NOT_CONTIGUOUS_OR_CHUNKED_DATASET; } -#ifdef LATER /* fletcher32 */ - if (selection_mode & TEST_FILTERS) { - test_name = "Broken Collective I/O - Filter is required"; - no_collective_cause_local_expected |= H5D_MPIO_FILTERS; - no_collective_cause_global_expected |= H5D_MPIO_FILTERS; - } -#endif /* LATER */ - if (selection_mode & TEST_COLLECTIVE) { test_name = "Broken Collective I/O - Not Broken"; no_collective_cause_local_expected = H5D_MPIO_COLLECTIVE; @@ -3669,7 +3637,7 @@ test_no_collective_cause_mode(int selection_mode) /* Get the cause of broken collective I/O */ ret = H5Pget_mpio_no_collective_cause(dxpl_write, &no_collective_cause_local_write, &no_collective_cause_global_write); - VRFY((ret >= 0), "retriving no collective cause succeeded"); + VRFY((ret >= 0), "retrieving no collective cause succeeded"); /*--------------------- * Test Read access @@ -3689,7 +3657,7 @@ test_no_collective_cause_mode(int selection_mode) /* Get the cause of broken collective I/O */ ret = H5Pget_mpio_no_collective_cause(dxpl_read, &no_collective_cause_local_read, &no_collective_cause_global_read); - VRFY((ret >= 0), "retriving no collective cause succeeded"); + VRFY((ret >= 0), "retrieving no collective cause succeeded"); /* Check write vs read */ VRFY((no_collective_cause_local_read == no_collective_cause_local_write), @@ -3699,10 +3667,12 @@ test_no_collective_cause_mode(int selection_mode) /* Test values */ HDmemset(message, 0, sizeof(message)); - HDsprintf(message, "Local cause of Broken Collective I/O has the correct value for %s.\n", test_name); + HDsnprintf(message, sizeof(message), + "Local cause of Broken Collective I/O has the correct value for %s.\n", test_name); VRFY((no_collective_cause_local_write == no_collective_cause_local_expected), message); HDmemset(message, 0, sizeof(message)); - HDsprintf(message, "Global cause of Broken Collective I/O has the correct value for %s.\n", test_name); + HDsnprintf(message, sizeof(message), + "Global cause of Broken Collective I/O has the correct value for %s.\n", test_name); VRFY((no_collective_cause_global_write == no_collective_cause_global_expected), message); /* Release some resources */ @@ -3733,240 +3703,6 @@ test_no_collective_cause_mode(int selection_mode) return; } -/* - * Function: test_no_collective_cause_mode_filter - * - * Purpose: - * Test specific for using filter as a caus of broken collective I/O and - * checks that the H5Pget_mpio_no_collective_cause properties in the DXPL - * have the correct values. - * - * NOTE: - * This is a temporary function. - * test_no_collective_cause_mode(TEST_FILTERS) will replace this when - * H5Dcreate and H5write support for mpio and filter feature. - * - * Input: - * TEST_FILTERS_READ: - * Test for using filter (checksum) as the cause of breaking collective I/O. - * - * Programmer: Jonathan Kim - * Date: Aug, 2012 - */ -#ifdef LATER -static void -test_no_collective_cause_mode_filter(int selection_mode) -{ - uint32_t no_collective_cause_local_read = 0; - uint32_t no_collective_cause_local_expected = 0; - uint32_t no_collective_cause_global_read = 0; - uint32_t no_collective_cause_global_expected = 0; - - const char *filename; - const char *test_name = "I/O"; - hbool_t is_chunked = 1; - int mpi_size = -1; - int mpi_rank = -1; - int length; - int * buffer; - int i; - MPI_Comm mpi_comm = MPI_COMM_NULL; - MPI_Info mpi_info = MPI_INFO_NULL; - hid_t fid = -1; - hid_t sid = -1; - hid_t dataset = -1; - hid_t data_type = H5T_NATIVE_INT; - hid_t fapl_write = -1; - hid_t fapl_read = -1; - hid_t dcpl = -1; - hid_t dxpl = -1; - hsize_t dims[RANK]; - hid_t mem_space = -1; - hid_t file_space = -1; - hsize_t chunk_dims[RANK]; - herr_t ret; -#ifdef LATER /* fletcher32 */ - H5Z_filter_t filter_info; -#endif /* LATER */ - char message[256]; - - /* Set up MPI parameters */ - MPI_Comm_size(MPI_COMM_WORLD, &mpi_size); - MPI_Comm_rank(MPI_COMM_WORLD, &mpi_rank); - - MPI_Barrier(MPI_COMM_WORLD); - - HDassert(mpi_size >= 1); - - mpi_comm = MPI_COMM_WORLD; - mpi_info = MPI_INFO_NULL; - - /* Create the dataset creation plist */ - dcpl = H5Pcreate(H5P_DATASET_CREATE); - VRFY((dcpl >= 0), "dataset creation plist created successfully"); - - if (selection_mode == TEST_FILTERS_READ) { -#ifdef LATER /* fletcher32 */ - ret = H5Zfilter_avail(H5Z_FILTER_FLETCHER32); - VRFY((ret >= 0), "Fletcher32 filter is available.\n"); - - ret = H5Zget_filter_info(H5Z_FILTER_FLETCHER32, (unsigned int *)&filter_info); - VRFY(((filter_info & H5Z_FILTER_CONFIG_ENCODE_ENABLED) || - (filter_info & H5Z_FILTER_CONFIG_DECODE_ENABLED)), - "Fletcher32 filter encoding and decoding available.\n"); - - ret = H5Pset_fletcher32(dcpl); - VRFY((ret >= 0), "set filter (flecher32) succeeded"); -#endif /* LATER */ - } - else { - VRFY(0, "Unexpected mode, only test for TEST_FILTERS_READ."); - } - - /* Create the basic Space */ - dims[0] = (hsize_t)dim0; - dims[1] = (hsize_t)dim1; - sid = H5Screate_simple(RANK, dims, NULL); - VRFY((sid >= 0), "H5Screate_simple succeeded"); - - filename = (const char *)GetTestParameters(); - HDassert(filename != NULL); - - /* Setup the file access template */ - fapl_write = create_faccess_plist(mpi_comm, mpi_info, FACC_DEFAULT); - VRFY((fapl_write >= 0), "create_faccess_plist() succeeded"); - - fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_write); - VRFY((fid >= 0), "H5Fcreate succeeded"); - - /* If we are not testing contiguous datasets */ - if (is_chunked) { - /* Set up chunk information. */ - chunk_dims[0] = dims[0] / (hsize_t)mpi_size; - chunk_dims[1] = dims[1]; - ret = H5Pset_chunk(dcpl, 2, chunk_dims); - VRFY((ret >= 0), "chunk creation property list succeeded"); - } - - /* Create the dataset */ - dataset = H5Dcreate2(fid, DSET_NOCOLCAUSE, data_type, sid, H5P_DEFAULT, dcpl, H5P_DEFAULT); - VRFY((dataset >= 0), "H5Dcreate2() dataset succeeded"); - -#ifdef LATER /* fletcher32 */ - /* Set expected cause */ - test_name = "Broken Collective I/O - Filter is required"; - no_collective_cause_local_expected = H5D_MPIO_FILTERS; - no_collective_cause_global_expected = H5D_MPIO_FILTERS; -#endif /* LATER */ - - /* Get the file dataspace */ - file_space = H5Dget_space(dataset); - VRFY((file_space >= 0), "H5Dget_space succeeded"); - - /* Create the memory dataspace */ - mem_space = H5Screate_simple(RANK, dims, NULL); - VRFY((mem_space >= 0), "mem_space created"); - - /* Get the number of elements in the selection */ - length = dim0 * dim1; - - /* Allocate and initialize the buffer */ - buffer = (int *)HDmalloc(sizeof(int) * length); - VRFY((buffer != NULL), "HDmalloc of buffer succeeded"); - for (i = 0; i < length; i++) - buffer[i] = i; - - /* Set up the dxpl for the write */ - dxpl = H5Pcreate(H5P_DATASET_XFER); - VRFY((dxpl >= 0), "H5Pcreate(H5P_DATASET_XFER) succeeded"); - - if (selection_mode == TEST_FILTERS_READ) { - /* To test read in collective I/O mode , write in independent mode - * because write fails with mpio + filter */ - ret = H5Pset_dxpl_mpio(dxpl, H5FD_MPIO_INDEPENDENT); - VRFY((ret >= 0), "H5Pset_dxpl_mpio succeeded"); - } - else { - /* To test write in collective I/O mode. */ - ret = H5Pset_dxpl_mpio(dxpl, H5FD_MPIO_COLLECTIVE); - VRFY((ret >= 0), "H5Pset_dxpl_mpio succeeded"); - } - - /* Write */ - ret = H5Dwrite(dataset, data_type, mem_space, file_space, dxpl, buffer); - - if (ret < 0) - H5Eprint2(H5E_DEFAULT, stdout); - VRFY((ret >= 0), "H5Dwrite() dataset multichunk write succeeded"); - - /* Make a copy of the dxpl to test the read operation */ - dxpl = H5Pcopy(dxpl); - VRFY((dxpl >= 0), "H5Pcopy succeeded"); - - if (dataset) - H5Dclose(dataset); - if (fapl_write) - H5Pclose(fapl_write); - if (fid) - H5Fclose(fid); - - /*--------------------- - * Test Read access - *---------------------*/ - - /* Setup the file access template */ - fapl_read = create_faccess_plist(mpi_comm, mpi_info, facc_type); - VRFY((fapl_read >= 0), "create_faccess_plist() succeeded"); - - fid = H5Fopen(filename, H5F_ACC_RDONLY, fapl_read); - dataset = H5Dopen2(fid, DSET_NOCOLCAUSE, H5P_DEFAULT); - - /* Set collective I/O properties in the dxpl. */ - ret = H5Pset_dxpl_mpio(dxpl, H5FD_MPIO_COLLECTIVE); - VRFY((ret >= 0), "H5Pset_dxpl_mpio succeeded"); - - /* Read */ - ret = H5Dread(dataset, data_type, mem_space, file_space, dxpl, buffer); - - if (ret < 0) - H5Eprint2(H5E_DEFAULT, stdout); - VRFY((ret >= 0), "H5Dread() dataset multichunk read succeeded"); - - /* Get the cause of broken collective I/O */ - ret = H5Pget_mpio_no_collective_cause(dxpl, &no_collective_cause_local_read, - &no_collective_cause_global_read); - VRFY((ret >= 0), "retriving no collective cause succeeded"); - - /* Test values */ - HDmemset(message, 0, sizeof(message)); - HDsprintf(message, "Local cause of Broken Collective I/O has the correct value for %s.\n", test_name); - VRFY((no_collective_cause_local_read == (uint32_t)no_collective_cause_local_expected), message); - HDmemset(message, 0, sizeof(message)); - HDsprintf(message, "Global cause of Broken Collective I/O has the correct value for %s.\n", test_name); - VRFY((no_collective_cause_global_read == (uint32_t)no_collective_cause_global_expected), message); - - /* Release some resources */ - if (sid) - H5Sclose(sid); - if (fapl_read) - H5Pclose(fapl_read); - if (dcpl) - H5Pclose(dcpl); - if (dxpl) - H5Pclose(dxpl); - if (dataset) - H5Dclose(dataset); - if (mem_space) - H5Sclose(mem_space); - if (file_space) - H5Sclose(file_space); - if (fid) - H5Fclose(fid); - HDfree(buffer); - return; -} -#endif - /* Function: no_collective_cause_tests * * Purpose: Tests cases for broken collective IO. @@ -3987,13 +3723,6 @@ no_collective_cause_tests(void) test_no_collective_cause_mode(TEST_NOT_SIMPLE_OR_SCALAR_DATASPACES); test_no_collective_cause_mode(TEST_NOT_CONTIGUOUS_OR_CHUNKED_DATASET_COMPACT); test_no_collective_cause_mode(TEST_NOT_CONTIGUOUS_OR_CHUNKED_DATASET_EXTERNAL); -#ifdef LATER /* fletcher32 */ - /* TODO: use this instead of below TEST_FILTERS_READ when H5Dcreate and - * H5Dwrite is ready for mpio + filter feature. - */ - /* test_no_collective_cause_mode (TEST_FILTERS); */ - test_no_collective_cause_mode_filter(TEST_FILTERS_READ); -#endif /* LATER */ /* * Test combined causes @@ -4114,7 +3843,7 @@ dataset_atomicity(void) /* file locking allows only one file open (serial) for writing */ if (MAINPROCESS) { fid = H5Fopen(filename, H5F_ACC_RDWR, H5P_DEFAULT); - VRFY((fid >= 0), "H5Fopen succeeed"); + VRFY((fid >= 0), "H5Fopen succeeded"); /* should fail */ H5E_BEGIN_TRY |