diff options
Diffstat (limited to 'testpar/t_shapesame.c')
-rw-r--r-- | testpar/t_shapesame.c | 76 |
1 files changed, 38 insertions, 38 deletions
diff --git a/testpar/t_shapesame.c b/testpar/t_shapesame.c index 42e960e..cbae5e1 100644 --- a/testpar/t_shapesame.c +++ b/testpar/t_shapesame.c @@ -11,7 +11,7 @@ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ /* - This program will test independant and collective reads and writes between + This program will test independent and collective reads and writes between selections of different rank that non-the-less are deemed as having the same shape by H5Sselect_shape_same(). */ @@ -415,11 +415,11 @@ hs_dr_pio_test__setup(const int test_num, const int edge_size, const int checker /* setup selections for writing initial data to the small data set */ ret = H5Sselect_hyperslab(tv_ptr->mem_small_ds_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->file_small_ds_sid_0, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) succeeded"); if (MAINPROCESS) { /* add an additional slice to the selections */ @@ -427,11 +427,11 @@ hs_dr_pio_test__setup(const int test_num, const int edge_size, const int checker ret = H5Sselect_hyperslab(tv_ptr->mem_small_ds_sid, H5S_SELECT_OR, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, or) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, or) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->file_small_ds_sid_0, H5S_SELECT_OR, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, or) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, or) succeeded"); } /* write the initial value of the small data set to file */ @@ -475,21 +475,21 @@ hs_dr_pio_test__setup(const int test_num, const int edge_size, const int checker ret = H5Sselect_hyperslab(tv_ptr->mem_large_ds_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_large_ds_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_large_ds_sid, set) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->file_large_ds_sid_0, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_sid_0, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_sid_0, set) succeeded"); /* In passing, setup the process slice dataspaces as well */ ret = H5Sselect_hyperslab(tv_ptr->mem_large_ds_process_slice_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_large_ds_process_slice_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_large_ds_process_slice_sid, set) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->file_large_ds_process_slice_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_process_slice_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_process_slice_sid, set) succeeded"); if (MAINPROCESS) { /* add an additional slice to the selections */ @@ -497,11 +497,11 @@ hs_dr_pio_test__setup(const int test_num, const int edge_size, const int checker ret = H5Sselect_hyperslab(tv_ptr->mem_large_ds_sid, H5S_SELECT_OR, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_large_ds_sid, or) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_large_ds_sid, or) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->file_large_ds_sid_0, H5S_SELECT_OR, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_sid_0, or) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_sid_0, or) succeeded"); } /* write the initial value of the large data set to file */ @@ -736,7 +736,7 @@ contig_hs_dr_pio_test__d2m_l2s(struct hs_dr_pio_test_vars_t *tv_ptr) * of the large data set. However, in the parallel version, each * process only works with that slice of the large cube indicated * by its rank -- hence we set the most slowly changing index to - * mpi_rank, and don't itterate over it. + * mpi_rank, and don't iterate over it. */ if (PAR_SS_DR_MAX_RANK - tv_ptr->large_rank == 0) { @@ -934,7 +934,7 @@ contig_hs_dr_pio_test__d2m_s2l(struct hs_dr_pio_test_vars_t *tv_ptr) ret = H5Sselect_hyperslab(tv_ptr->file_small_ds_sid_0, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) succeeded"); #if CONTIG_HS_DR_PIO_TEST__D2M_S2L__DEBUG HDfprintf(stdout, "%s reading slices of on disk small data set into slices of big data set.\n", fcnName); @@ -966,7 +966,7 @@ contig_hs_dr_pio_test__d2m_s2l(struct hs_dr_pio_test_vars_t *tv_ptr) * * However, in the parallel version, each process only works with that * slice of the large (and small) data set indicated by its rank -- hence - * we set the most slowly changing index to mpi_rank, and don't itterate + * we set the most slowly changing index to mpi_rank, and don't iterate * over it. */ @@ -1187,11 +1187,11 @@ contig_hs_dr_pio_test__m2d_l2s(struct hs_dr_pio_test_vars_t *tv_ptr) ret = H5Sselect_hyperslab(tv_ptr->file_small_ds_sid_0, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->mem_small_ds_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) succeeded"); /* set up start, stride, count, and block -- note that we will * change start[] so as to read slices of the large cube. @@ -1223,7 +1223,7 @@ contig_hs_dr_pio_test__m2d_l2s(struct hs_dr_pio_test_vars_t *tv_ptr) * * However, in the parallel version, each process only works with that * slice of the large (and small) data set indicated by its rank -- hence - * we set the most slowly changing index to mpi_rank, and don't itterate + * we set the most slowly changing index to mpi_rank, and don't iterate * over it. */ @@ -1465,7 +1465,7 @@ contig_hs_dr_pio_test__m2d_s2l(struct hs_dr_pio_test_vars_t *tv_ptr) ret = H5Sselect_hyperslab(tv_ptr->mem_small_ds_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) succeeded"); /* set up start, stride, count, and block -- note that we will * change start[] so as to write slices of the small data set to @@ -1575,7 +1575,7 @@ contig_hs_dr_pio_test__m2d_s2l(struct hs_dr_pio_test_vars_t *tv_ptr) ret = H5Dwrite(tv_ptr->large_dataset, H5T_NATIVE_UINT32, tv_ptr->large_ds_slice_sid, tv_ptr->file_large_ds_process_slice_sid, tv_ptr->xfer_plist, tv_ptr->large_ds_buf_2); - VRFY((ret != FAIL), "H5Dwrite() to zero large ds suceeded"); + VRFY((ret != FAIL), "H5Dwrite() to zero large ds succeeded"); /* select the portion of the in memory large cube to which we * are going to write data. @@ -2012,8 +2012,8 @@ contig_hs_dr_pio_test(ShapeSameTestMethods sstest_type) ** edge_size, and a checker_edge_size, select a checker ** board selection of a sel_rank (sel_rank < tgt_rank) ** dimensional slice through the dataspace parallel to the -** sel_rank fastest changing indicies, with origin (in the -** higher indicies) as indicated by the start array. +** sel_rank fastest changing indices, with origin (in the +** higher indices) as indicated by the start array. ** ** Note that this function, like all its relatives, is ** hard coded to presume a maximum dataspace rank of 5. @@ -2322,7 +2322,7 @@ ckrbrd_hs_dr_pio_test__slct_ckrbrd(const int mpi_rank, const hid_t tgt_sid, cons ** or writing a checker board selection of an m (1 <= m < ** rank) dimensional slice through this processes slice ** of the target data set. Also, this slice must be parallel -** to the fastest changing indicies. +** to the fastest changing indices. ** ** It is further presumed that the buffer was zeroed before ** the read/write, and that the full target data set (i.e. @@ -2357,7 +2357,7 @@ ckrbrd_hs_dr_pio_test__slct_ckrbrd(const int mpi_rank, const hid_t tgt_sid, cons ** of the buffer resides either at the origin of either ** a selected or an unselected checker. (Translation: ** if partial checkers appear in the buffer, they will -** intersect the edges of the n-cube oposite the origin.) +** intersect the edges of the n-cube opposite the origin.) ** ****************************************************************/ @@ -2607,7 +2607,7 @@ ckrbrd_hs_dr_pio_test__d2m_l2s(struct hs_dr_pio_test_vars_t *tv_ptr) * of the large data set. However, in the parallel version, each * process only works with that slice of the large cube indicated * by its rank -- hence we set the most slowly changing index to - * mpi_rank, and don't itterate over it. + * mpi_rank, and don't iterate over it. */ if (PAR_SS_DR_MAX_RANK - tv_ptr->large_rank == 0) { @@ -2830,7 +2830,7 @@ ckrbrd_hs_dr_pio_test__d2m_s2l(struct hs_dr_pio_test_vars_t *tv_ptr) * * However, in the parallel version, each process only works with that * slice of the large (and small) data set indicated by its rank -- hence - * we set the most slowly changing index to mpi_rank, and don't itterate + * we set the most slowly changing index to mpi_rank, and don't iterate * over it. */ @@ -3097,11 +3097,11 @@ ckrbrd_hs_dr_pio_test__m2d_l2s(struct hs_dr_pio_test_vars_t *tv_ptr) ret = H5Sselect_hyperslab(tv_ptr->file_small_ds_sid_0, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_small_ds_sid_0, set) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->mem_small_ds_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(mem_small_ds_sid, set) succeeded"); sel_start[0] = sel_start[1] = sel_start[2] = sel_start[3] = sel_start[4] = 0; sel_start[tv_ptr->small_ds_offset] = (hsize_t)(tv_ptr->mpi_rank); @@ -3142,7 +3142,7 @@ ckrbrd_hs_dr_pio_test__m2d_l2s(struct hs_dr_pio_test_vars_t *tv_ptr) * * However, in the parallel version, each process only works with that * slice of the large (and small) data set indicated by its rank -- hence - * we set the most slowly changing index to mpi_rank, and don't itterate + * we set the most slowly changing index to mpi_rank, and don't iterate * over it. */ @@ -3391,11 +3391,11 @@ ckrbrd_hs_dr_pio_test__m2d_s2l(struct hs_dr_pio_test_vars_t *tv_ptr) ret = H5Sselect_hyperslab(tv_ptr->file_large_ds_sid_0, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_sid_0, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(file_large_ds_sid_0, set) succeeded"); ret = H5Sselect_hyperslab(tv_ptr->mem_large_ds_sid, H5S_SELECT_SET, tv_ptr->start, tv_ptr->stride, tv_ptr->count, tv_ptr->block); - VRFY((ret >= 0), "H5Sselect_hyperslab(tv_ptr->mem_large_ds_sid, set) suceeded"); + VRFY((ret >= 0), "H5Sselect_hyperslab(tv_ptr->mem_large_ds_sid, set) succeeded"); /* setup a checkerboard selection of the slice of the in memory small * data set associated with the process's mpi rank. @@ -3503,7 +3503,7 @@ ckrbrd_hs_dr_pio_test__m2d_s2l(struct hs_dr_pio_test_vars_t *tv_ptr) */ ret = H5Dwrite(tv_ptr->large_dataset, H5T_NATIVE_UINT32, tv_ptr->mem_large_ds_sid, tv_ptr->file_large_ds_sid_0, tv_ptr->xfer_plist, tv_ptr->large_ds_buf_2); - VRFY((ret != FAIL), "H5Dwrite() to zero large ds suceeded"); + VRFY((ret != FAIL), "H5Dwrite() to zero large ds succeeded"); /* select the portion of the in memory large cube to which we * are going to write data. @@ -4218,42 +4218,42 @@ create_faccess_plist(MPI_Comm comm, MPI_Info info, int l_facc_type) return (ret_pl); } -/* Shape Same test using contigous hyperslab using independent IO on contigous datasets */ +/* Shape Same test using contiguous hyperslab using independent IO on contiguous datasets */ static void sscontig1(void) { contig_hs_dr_pio_test(IND_CONTIG); } -/* Shape Same test using contigous hyperslab using collective IO on contigous datasets */ +/* Shape Same test using contiguous hyperslab using collective IO on contiguous datasets */ static void sscontig2(void) { contig_hs_dr_pio_test(COL_CONTIG); } -/* Shape Same test using contigous hyperslab using independent IO on chunked datasets */ +/* Shape Same test using contiguous hyperslab using independent IO on chunked datasets */ static void sscontig3(void) { contig_hs_dr_pio_test(IND_CHUNKED); } -/* Shape Same test using contigous hyperslab using collective IO on chunked datasets */ +/* Shape Same test using contiguous hyperslab using collective IO on chunked datasets */ static void sscontig4(void) { contig_hs_dr_pio_test(COL_CHUNKED); } -/* Shape Same test using checker hyperslab using independent IO on contigous datasets */ +/* Shape Same test using checker hyperslab using independent IO on contiguous datasets */ static void sschecker1(void) { ckrbrd_hs_dr_pio_test(IND_CONTIG); } -/* Shape Same test using checker hyperslab using collective IO on contigous datasets */ +/* Shape Same test using checker hyperslab using collective IO on contiguous datasets */ static void sschecker2(void) { @@ -4321,7 +4321,7 @@ main(int argc, char **argv) /* Initialize testing framework */ TestInit(argv[0], usage, parse_options); - /* Shape Same tests using contigous hyperslab */ + /* Shape Same tests using contiguous hyperslab */ AddTest("sscontig1", sscontig1, NULL, "Cntg hslab, ind IO, cntg dsets", PARATESTFILE); AddTest("sscontig2", sscontig2, NULL, "Cntg hslab, col IO, cntg dsets", PARATESTFILE); AddTest("sscontig3", sscontig3, NULL, "Cntg hslab, ind IO, chnk dsets", PARATESTFILE); |