diff options
Diffstat (limited to 'testpar')
| -rw-r--r-- | testpar/CMakeLists.txt | 1 | ||||
| -rw-r--r-- | testpar/Makefile.am | 2 | ||||
| -rw-r--r-- | testpar/t_coll_chunk.c | 5 | ||||
| -rw-r--r-- | testpar/t_dset.c | 46 | ||||
| -rw-r--r-- | testpar/t_vfd.c | 4055 |
5 files changed, 4087 insertions, 22 deletions
diff --git a/testpar/CMakeLists.txt b/testpar/CMakeLists.txt index ff4446c..32f4a0f 100644 --- a/testpar/CMakeLists.txt +++ b/testpar/CMakeLists.txt @@ -89,6 +89,7 @@ set (H5P_TESTS t_shapesame t_filters_parallel t_2Gio + t_vfd ) foreach (h5_testp ${H5P_TESTS}) diff --git a/testpar/Makefile.am b/testpar/Makefile.am index 6a8cc2b..cbde0c1 100644 --- a/testpar/Makefile.am +++ b/testpar/Makefile.am @@ -30,7 +30,7 @@ check_SCRIPTS = $(TEST_SCRIPT_PARA) # Test programs. These are our main targets. # -TEST_PROG_PARA=t_mpi t_bigio testphdf5 t_cache t_cache_image t_pread t_pshutdown t_prestart t_init_term t_shapesame t_filters_parallel t_2Gio +TEST_PROG_PARA=t_mpi t_bigio testphdf5 t_cache t_cache_image t_pread t_pshutdown t_prestart t_init_term t_shapesame t_filters_parallel t_2Gio t_vfd # t_pflush1 and t_pflush2 are used by testpflush.sh check_PROGRAMS = $(TEST_PROG_PARA) t_pflush1 t_pflush2 diff --git a/testpar/t_coll_chunk.c b/testpar/t_coll_chunk.c index 104460a..20efaa1 100644 --- a/testpar/t_coll_chunk.c +++ b/testpar/t_coll_chunk.c @@ -832,7 +832,10 @@ coll_chunktest(const char *filename, int chunk_factor, int select_factor, int ap VRFY((status >= 0), "dataset write succeeded"); #ifdef H5_HAVE_INSTRUMENTED_LIBRARY - if (facc_type == FACC_MPIO) { + /* Only check chunk optimization mode if selection I/O is not being used - + * selection I/O bypasses this IO mode decision - it's effectively always + * multi chunk currently */ + if (facc_type == FACC_MPIO && !H5_use_selection_io_g) { switch (api_option) { case API_LINK_HARD: status = H5Pget(xfer_plist, H5D_XFER_COLL_CHUNK_LINK_HARD_NAME, &prop_value); diff --git a/testpar/t_dset.c b/testpar/t_dset.c index 8616bef..51e72bd 100644 --- a/testpar/t_dset.c +++ b/testpar/t_dset.c @@ -3351,32 +3351,38 @@ actual_io_mode_tests(void) int mpi_size = -1; MPI_Comm_size(MPI_COMM_WORLD, &mpi_size); - test_actual_io_mode(TEST_ACTUAL_IO_NO_COLLECTIVE); + /* Only run these tests if selection I/O is not being used - selection I/O + * bypasses this IO mode decision - it's effectively always multi chunk + * currently */ + if (!H5_use_selection_io_g) { + test_actual_io_mode(TEST_ACTUAL_IO_NO_COLLECTIVE); + + /* + * Test multi-chunk-io via proc_num threshold + */ + test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_IND); + test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_COL); - /* - * Test multi-chunk-io via proc_num threshold - */ - test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_IND); - test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_COL); + /* The Multi Chunk Mixed test requires at least three processes. */ + if (mpi_size > 2) + test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX); + else + HDfprintf(stdout, "Multi Chunk Mixed test requires 3 processes minimum\n"); - /* The Multi Chunk Mixed test requires at least three processes. */ - if (mpi_size > 2) - test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX); - else - HDfprintf(stdout, "Multi Chunk Mixed test requires 3 processes minimum\n"); + test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE); - test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE); + /* + * Test multi-chunk-io via setting direct property + */ + test_actual_io_mode(TEST_ACTUAL_IO_DIRECT_MULTI_CHUNK_IND); + test_actual_io_mode(TEST_ACTUAL_IO_DIRECT_MULTI_CHUNK_COL); - /* - * Test multi-chunk-io via setting direct property - */ - test_actual_io_mode(TEST_ACTUAL_IO_DIRECT_MULTI_CHUNK_IND); - test_actual_io_mode(TEST_ACTUAL_IO_DIRECT_MULTI_CHUNK_COL); + test_actual_io_mode(TEST_ACTUAL_IO_LINK_CHUNK); + test_actual_io_mode(TEST_ACTUAL_IO_CONTIGUOUS); - test_actual_io_mode(TEST_ACTUAL_IO_LINK_CHUNK); - test_actual_io_mode(TEST_ACTUAL_IO_CONTIGUOUS); + test_actual_io_mode(TEST_ACTUAL_IO_RESET); + } - test_actual_io_mode(TEST_ACTUAL_IO_RESET); return; } diff --git a/testpar/t_vfd.c b/testpar/t_vfd.c new file mode 100644 index 0000000..2072afe --- /dev/null +++ b/testpar/t_vfd.c @@ -0,0 +1,4055 @@ +/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * + * Copyright by The HDF Group. * + * All rights reserved. * + * * + * This file is part of HDF5. The full HDF5 copyright notice, including * + * terms governing use, modification, and redistribution, is contained in * + * the COPYING file, which can be found at the root of the source code * + * distribution tree, or in https://www.hdfgroup.org/licenses. * + * If you do not have access to either file, you may request a copy from * + * help@hdfgroup.org. * + * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ + +/* Programmer: John Mainzer + * + * This file is a catchall for parallel VFD tests. + */ + +#include "testphdf5.h" + +/* Must be a power of 2. Reducing it below 1024 may cause problems */ +#define INTS_PER_RANK 1024 + +/* global variable declarations: */ + +hbool_t pass = TRUE; /* set to FALSE on error */ +const char *failure_mssg = NULL; + +const char *FILENAMES[] = {"mpio_vfd_test_file_0", /*0*/ + "mpio_vfd_test_file_1", /*1*/ + "mpio_vfd_test_file_2", /*2*/ + "mpio_vfd_test_file_3", /*3*/ + "mpio_vfd_test_file_4", /*4*/ + "mpio_vfd_test_file_5", /*5*/ + NULL}; + +/* File Test Images + * + * Pointers to dynamically allocated buffers of size + * INTS_PER_RANK * sizeof(int32_t) * mpi_size(). These + * buffers are used to put the test file in a known + * state, and to test if the test file contains the + * expected data. + */ + +int32_t *increasing_fi_buf = NULL; +int32_t *decreasing_fi_buf = NULL; +int32_t *negative_fi_buf = NULL; +int32_t *zero_fi_buf = NULL; +int32_t *read_fi_buf = NULL; + +/* local utility function declarations */ + +static unsigned alloc_and_init_file_images(int mpi_size); +static void free_file_images(void); +static void setup_vfd_test_file(int file_name_id, char *file_name, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name, haddr_t eoa, + H5FD_t **lf_ptr, hid_t *fapl_id_ptr, hid_t *dxpl_id_ptr); +static void takedown_vfd_test_file(int mpi_rank, char *filename, H5FD_t **lf_ptr, hid_t *fapl_id_ptr, + hid_t *dxpl_id_ptr); + +/* test functions */ +static unsigned vector_read_test_1(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_read_test_2(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_read_test_3(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_read_test_4(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_read_test_5(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); + +static unsigned vector_write_test_1(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_write_test_2(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_write_test_3(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_write_test_4(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_write_test_5(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); +static unsigned vector_write_test_6(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name); + +/****************************************************************************/ +/***************************** Utility Functions ****************************/ +/****************************************************************************/ + +/*------------------------------------------------------------------------- + * Function: alloc_and_init_file_images + * + * Purpose: Allocate and initialize the global buffers used to construct, + * load and verify test file contents. + * + * Return: void + * + * Programmer: John Mainzer + * 3/25/26 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +alloc_and_init_file_images(int mpi_size) +{ + const char *fcn_name = "alloc_and_init_file_images()"; + int cp = 0; + int buf_len; + size_t buf_size; + int i; + hbool_t show_progress = FALSE; + + pass = TRUE; + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* allocate the file image buffers */ + if (pass) { + + buf_len = INTS_PER_RANK * mpi_size; + buf_size = sizeof(int32_t) * (size_t)INTS_PER_RANK * (size_t)mpi_size; + + increasing_fi_buf = (int32_t *)HDmalloc(buf_size); + decreasing_fi_buf = (int32_t *)HDmalloc(buf_size); + negative_fi_buf = (int32_t *)HDmalloc(buf_size); + zero_fi_buf = (int32_t *)HDmalloc(buf_size); + read_fi_buf = (int32_t *)HDmalloc(buf_size); + + if ((!increasing_fi_buf) || (!decreasing_fi_buf) || (!negative_fi_buf) || (!zero_fi_buf) || + (!read_fi_buf)) { + + pass = FALSE; + failure_mssg = "Can't allocate one or more file image buffers."; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* initialize the file image buffers */ + if (pass) { + + for (i = 0; i < buf_len; i++) { + + increasing_fi_buf[i] = i; + decreasing_fi_buf[i] = buf_len - i; + negative_fi_buf[i] = -i; + zero_fi_buf[i] = 0; + read_fi_buf[i] = 0; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* discard file image buffers if there was an error */ + if (!pass) { + + free_file_images(); + } + + return !pass; + +} /* alloc_and_init_file_images() */ + +/*------------------------------------------------------------------------- + * Function: free_file_images + * + * Purpose: Deallocate any glogal file image buffers that exist, and + * set their associated pointers to NULL. + * + * Return: void + * + * Programmer: John Mainzer + * 1/25/17 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static void +free_file_images(void) +{ + if (increasing_fi_buf) { + + HDfree(increasing_fi_buf); + increasing_fi_buf = NULL; + } + + if (decreasing_fi_buf) { + + HDfree(decreasing_fi_buf); + decreasing_fi_buf = NULL; + } + + if (negative_fi_buf) { + + HDfree(negative_fi_buf); + negative_fi_buf = NULL; + } + + if (zero_fi_buf) { + + HDfree(zero_fi_buf); + zero_fi_buf = NULL; + } + + if (read_fi_buf) { + + HDfree(read_fi_buf); + read_fi_buf = NULL; + } + + return; + +} /* free_file_images() */ + +/*------------------------------------------------------------------------- + * Function: setup_vfd_test_file + * + * Purpose: Create / open the specified test file with the specified + * VFD, and set the EOA to the specified value. + * + * Setup the dxpl for subsequent I/O via the target VFD. + * + * Return a pointer to the instance of H5FD_t created on + * file open in *lf_ptr, and the FAPL and DXPL ids in + * *fapl_id_ptr and *dxpl_id_ptr. Similarly, copy the + * "fixed" file name into file_name on exit. + * + * Return: void + * + * Programmer: John Mainzer + * 3/25/26 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static void +setup_vfd_test_file(int file_name_id, char *file_name, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name, haddr_t eoa, + H5FD_t **lf_ptr, hid_t *fapl_id_ptr, hid_t *dxpl_id_ptr) +{ + const char *fcn_name = "setup_vfd_test_file()"; + char filename[512]; + int cp = 0; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + unsigned flags = 0; /* file open flags */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + + HDassert(vfd_name); + HDassert(lf_ptr); + HDassert(fapl_id_ptr); + HDassert(dxpl_id_ptr); + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* setupf fapl for target VFD */ + if (pass) { + + if ((fapl_id = H5Pcreate(H5P_FILE_ACCESS)) < 0) { + + pass = FALSE; + failure_mssg = "Can't create fapl."; + } + } + + if (pass) { + + if (strcmp(vfd_name, "mpio") == 0) { + + if (H5Pset_fapl_mpio(fapl_id, MPI_COMM_WORLD, MPI_INFO_NULL) < 0) { + + pass = FALSE; + failure_mssg = "Can't set mpio fapl."; + } + } + else { + + pass = FALSE; + failure_mssg = "un-supported VFD"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* setup the file name */ + if (pass) { + + if (h5_fixname(FILENAMES[file_name_id], H5P_DEFAULT, filename, sizeof(filename)) == NULL) { + + pass = FALSE; + failure_mssg = "h5_fixname() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* Open the VFD test file with the specified VFD. */ + + if (pass) { + + flags = H5F_ACC_RDWR | H5F_ACC_CREAT | H5F_ACC_TRUNC; + + if (NULL == (lf = H5FDopen(filename, flags, fapl_id, HADDR_UNDEF))) { + + pass = FALSE; + failure_mssg = "H5FDopen() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* set eoa as specified */ + + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + if (H5FDset_eoa(lf, H5FD_MEM_DEFAULT, eoa) < 0) { + + pass = FALSE; + failure_mssg = "H5FDset_eoa() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + if (pass) { /* setup dxpl */ + + dxpl_id = H5Pcreate(H5P_DATASET_XFER); + + if (dxpl_id < 0) { + + pass = FALSE; + failure_mssg = "H5Pcreate(H5P_DATASET_XFER) failed."; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + if (pass) { + + if (H5Pset_dxpl_mpio(dxpl_id, xfer_mode) < 0) { + + pass = FALSE; + failure_mssg = "H5Pset_dxpl_mpio() failed."; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + if (pass) { + + if (H5Pset_dxpl_mpio_collective_opt(dxpl_id, coll_opt_mode) < 0) { + + pass = FALSE; + failure_mssg = "H5Pset_dxpl_mpio() failed."; + } + } + + if (pass) { /* setup pointers with return values */ + + strncpy(file_name, filename, 512); + *lf_ptr = lf; + *fapl_id_ptr = fapl_id; + *dxpl_id_ptr = dxpl_id; + } + else { /* tidy up from failure as possible */ + + if (lf) + H5FDclose(lf); + + if (fapl_id != -1) + H5Pclose(fapl_id); + + if (dxpl_id != -1) + H5Pclose(dxpl_id); + } + + return; + +} /* setup_vfd_test_file() */ + +/*------------------------------------------------------------------------- + * Function: takedown_vfd_test_file + * + * Purpose: Close and delete the specified test file. Close the + * FAPL & DXPL. + * + * Return: void + * + * Programmer: John Mainzer + * 3/25/26 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static void +takedown_vfd_test_file(int mpi_rank, char *filename, H5FD_t **lf_ptr, hid_t *fapl_id_ptr, hid_t *dxpl_id_ptr) +{ + const char *fcn_name = "takedown_vfd_test_file()"; + int cp = 0; + hbool_t show_progress = FALSE; + + HDassert(lf_ptr); + HDassert(fapl_id_ptr); + HDassert(dxpl_id_ptr); + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* Close the test file if it is open, regardless of the value of pass. + * This should let the test program shut down more cleanly. + */ + + if (*lf_ptr) { + + if (H5FDclose(*lf_ptr) < 0) { + + pass = FALSE; + failure_mssg = "H5FDclose() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) On rank 0, delete the test file. + */ + + if (pass) { + + /* wait for everyone to close the file */ + MPI_Barrier(MPI_COMM_WORLD); + + if ((mpi_rank == 0) && (HDremove(filename) < 0)) { + + pass = FALSE; + failure_mssg = "HDremove() failed.\n"; + } + + /* wait for the file delete to complete */ + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* Close the fapl */ + if (H5Pclose(*fapl_id_ptr) < 0) { + + pass = FALSE; + failure_mssg = "can't close fapl.\n"; + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* Close the dxpl */ + if (H5Pclose(*dxpl_id_ptr) < 0) { + + pass = FALSE; + failure_mssg = "can't close dxpl.\n"; + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + return; + +} /* takedown_vfd_test_file() */ + +/****************************************************************************/ +/******************************* Test Functions *****************************/ +/****************************************************************************/ + +/*------------------------------------------------------------------------- + * Function: vector_read_test_1() + * + * Purpose: Simple vector read test: + * + * 1) Open the test file with the specified VFD, set the eoa, + * and setup the DXPL. + * + * 2) Using rank zero, write the entire increasing_fi_buf to + * the file. + * + * 3) Barrier + * + * 4) On each rank, zero the read buffer, and then read + * INTS_PER_RANK * sizeof(int32) bytes from the file + * starting at offset mpi_rank * INTS_PER_RANK * + * sizeof(int32_t) in both the file and read_fi_buf. + * Do this with a vector read containing a single + * element. + * + * Verify that read_fi_buf contains zeros for all + * indices less than mpi_rank * INTS_PER_RANK, or + * greater than or equal to (mpi_rank + 1) * INTS_PER_RANK. + * For all other indices, read_fi_buf should equal + * increasing_fi_buf. + * + * 5) Barrier + * + * 6) Close the test file. + * + * 7) On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/26/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_read_test_1(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_read_test_1()"; + char test_title[120]; + char filename[512]; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + uint32_t count; + H5FD_mem_t types[1]; + haddr_t addrs[1]; + size_t sizes[1]; + void * bufs[1]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector read test 1 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector read test 1 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector read test 1 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Using rank zero, write the entire increasing_fi_buf to + * the file. + */ + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (mpi_rank == 0) { + + if (H5FDwrite(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)increasing_fi_buf) < + 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite() on rank 0 failed.\n"; + } + } + } + + /* 3) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) On each rank, zero the read buffer, and then read + * INTS_PER_RANK * sizeof(int32) bytes from the file + * starting at offset mpi_rank * INTS_PER_RANK * + * sizeof(int32_t) in both the file and read_fi_buf. + * Do this with a vector read containing a single + * element. + * + * Verify that read_fi_buf contains zeros for all + * indices less than mpi_rank * INTS_PER_RANK, or + * greater than or equal to (mpi_rank + 1) * INTS_PER_RANK. + * For all other indices, read_fi_buf should equal + * increasing_fi_buf. + */ + if (pass) { + + for (i = 0; i < mpi_size * INTS_PER_RANK; i++) { + + read_fi_buf[i] = 0; + } + + count = 1; + types[0] = H5FD_MEM_DRAW; + addrs[0] = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)INTS_PER_RANK * sizeof(int32_t); + bufs[0] = (void *)(&(read_fi_buf[mpi_rank * INTS_PER_RANK])); + + if (H5FDread_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread_vector() failed.\n"; + } + + for (i = 0; i < mpi_size * INTS_PER_RANK; i++) { + + if ((i < mpi_rank * INTS_PER_RANK) || (i >= (mpi_rank + 1) * INTS_PER_RANK)) { + + if (read_fi_buf[i] != 0) { + + pass = FALSE; + failure_mssg = "Unexpected value in read_fi_buf (1).\n"; + break; + } + } + else { + + if (read_fi_buf[i] != increasing_fi_buf[i]) { + + pass = FALSE; + failure_mssg = "Unexpected value in read_fi_buf (2).\n"; + break; + } + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_read_test_1() */ + +/*------------------------------------------------------------------------- + * Function: vector_read_test_2() + * + * Purpose: Simple vector read test with only half of ranks + * participating in each vector read. + * + * 1) Open the test file with the specified VFD, set the eoa, + * and setup the DXPL. + * + * 2) Using rank zero, write the entire decreasing_fi_buf to + * the file. + * + * 3) Barrier + * + * 4) On each rank, zero the read buffer. + * + * 5) On even ranks, read INTS_PER_RANK * sizeof(int32) + * bytes from the file starting at offset mpi_rank * + * INTS_PER_RANK * sizeof(int32_t) in both the file and + * read_fi_buf. Do this with a vector read containing + * a single element. + * + * Odd ranks perform an empty read. + * + * 6) Barrier. + * + * 7) On odd ranks, read INTS_PER_RANK * sizeof(int32) + * bytes from the file starting at offset mpi_rank * + * INTS_PER_RANK * sizeof(int32_t) in both the file and + * read_fi_buf. Do this with a vector read containing + * a single element. + * + * Even ranks perform an empty read. + * + * 8) Verify that read_fi_buf contains zeros for all + * indices less than mpi_rank * INTS_PER_RANK, or + * greater than or equal to (mpi_rank + 1) * INTS_PER_RANK. + * For all other indices, read_fi_buf should equal + * decreasing_fi_buf. + * + * 9) Barrier + * + * 10) Close the test file. + * + * 11) On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/26/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_read_test_2(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_read_test_2()"; + char test_title[120]; + char filename[512]; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + uint32_t count; + H5FD_mem_t types[1]; + haddr_t addrs[1]; + size_t sizes[1]; + void * bufs[1]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector read test 2 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector read test 2 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector read test 2 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Using rank zero, write the entire decreasing_fi_buf to + * the file. + */ + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (mpi_rank == 0) { + + if (H5FDwrite(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)decreasing_fi_buf) < + 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite() on rank 0 failed.\n"; + } + } + } + + /* 3) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) On each rank, zero the read buffer. */ + if (pass) { + + for (i = 0; i < mpi_size * INTS_PER_RANK; i++) { + + read_fi_buf[i] = 0; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) On even ranks, read INTS_PER_RANK * sizeof(int32) + * bytes from the file starting at offset mpi_rank * + * INTS_PER_RANK * sizeof(int32_t) in both the file and + * read_fi_buf. Do this with a vector read containing + * a single element. + * + * Odd ranks perform an empty read. + */ + if (pass) { + + if (mpi_rank % 2 == 0) { + + count = 1; + types[0] = H5FD_MEM_DRAW; + addrs[0] = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)INTS_PER_RANK * sizeof(int32_t); + bufs[0] = (void *)(&(read_fi_buf[mpi_rank * INTS_PER_RANK])); + } + else { + + count = 0; + } + + if (H5FDread_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread_vector() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 7) On odd ranks, read INTS_PER_RANK * sizeof(int32) + * bytes from the file starting at offset mpi_rank * + * INTS_PER_RANK * sizeof(int32_t) in both the file and + * read_fi_buf. Do this with a vector read containing + * a single element. + * + * Even ranks perform an empty read. + */ + if (pass) { + + if (mpi_rank % 2 == 1) { + + count = 1; + types[0] = H5FD_MEM_DRAW; + addrs[0] = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)INTS_PER_RANK * sizeof(int32_t); + bufs[0] = (void *)(&(read_fi_buf[mpi_rank * INTS_PER_RANK])); + } + else { + + count = 0; + } + + if (H5FDread_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread_vector() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 8) Verify that read_fi_buf contains zeros for all + * indices less than mpi_rank * INTS_PER_RANK, or + * greater than or equal to (mpi_rank + 1) * INTS_PER_RANK. + * For all other indices, read_fi_buf should equal + * decreasing_fi_buf. + */ + + if (pass) { + + for (i = 0; i < mpi_size * INTS_PER_RANK; i++) { + + if ((i < mpi_rank * INTS_PER_RANK) || (i >= (mpi_rank + 1) * INTS_PER_RANK)) { + + if (read_fi_buf[i] != 0) { + + pass = FALSE; + failure_mssg = "Unexpected value in read_fi_buf (1).\n"; + break; + } + } + else { + + if (read_fi_buf[i] != decreasing_fi_buf[i]) { + + pass = FALSE; + failure_mssg = "Unexpected value in read_fi_buf (2).\n"; + break; + } + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 9) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 10) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_read_test_2() */ + +/*------------------------------------------------------------------------- + * Function: vector_read_test_3() + * + * Purpose: Verify that vector read works with multiple entries in + * the vector in each read, and that read buffers need not + * be in increasing (memory) address order. + * + * 1) Open the test file with the specified VFD, set the eoa, + * and setup the DXPL. + * + * 2) Using rank zero, write the entire negative_fi_buf to + * the file. + * + * 3) Barrier + * + * 4) On each rank, zero the four read buffers. + * + * 5) On each rank, do a vector read from the file, with + * each rank's vector having four elements, with each + * element reading INTS_PER_RANK / 4 * sizeof(int32) + * bytes, and the reads starting at address: + * + * (mpi_rank * INTS_PER_RANK) * sizeof(int32_t) + * + * (mpi_rank * INTS_PER_RANK + INTS_PER_RANK / 4) * + * sizeof(int32_t) + * + * (mpi_rank * INTS_PER_RANK + INTS_PER_RANK / 2) * + * sizeof(int32_t) + * + * (mpi_rank * INTS_PER_RANK + 3 * INTS_PER_RANK / 2) * + * sizeof(int32_t) + * + * On even ranks, the targets of the reads should be + * buf_0, buf_1, buf_2, and buf_3 respectively. + * + * On odd ranks, the targets of the reads should be + * buf_3, buf_2, buf_1, and buf_0 respectively. + * + * This has the effect of ensuring that on at least + * some ranks, the read buffers are not in increasing + * address order. + * + * 6) Verify that buf_0, buf_1, buf_2, and buf_3 contain + * the expected data. Note that this will be different + * on even vs. odd ranks. + * + * 7) Barrier. + * + * 8) Close the test file. + * + * 9) On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/26/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_read_test_3(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_read_test_3()"; + char test_title[120]; + char filename[512]; + int32_t buf_0[(INTS_PER_RANK / 4) + 1]; + int32_t buf_1[(INTS_PER_RANK / 4) + 1]; + int32_t buf_2[(INTS_PER_RANK / 4) + 1]; + int32_t buf_3[(INTS_PER_RANK / 4) + 1]; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + uint32_t count; + H5FD_mem_t types[4]; + haddr_t addrs[4]; + size_t sizes[4]; + void * bufs[4]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector read test 3 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector read test 3 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector read test 3 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Using rank zero, write the entire negative_fi_buf to + * the file. + */ + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (mpi_rank == 0) { + + if (H5FDwrite(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)negative_fi_buf) < + 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite() on rank 0 failed.\n"; + } + } + } + + /* 3) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) On each rank, zero the four read buffers. */ + if (pass) { + + for (i = 0; i <= INTS_PER_RANK / 4; i++) { + + buf_0[i] = 0; + buf_1[i] = 0; + buf_2[i] = 0; + buf_3[i] = 0; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) On each rank, do a vector read from the file, with + * each rank's vector having four elements, with each + * element reading INTS_PER_RANK / 4 * sizeof(int32) + * bytes, and the reads starting at address: + * + * (mpi_rank * INTS_PER_RANK) * sizeof(int32_t) + * + * (mpi_rank * INTS_PER_RANK + INTS_PER_RANK / 4) * + * sizeof(int32_t) + * + * (mpi_rank * INTS_PER_RANK + INTS_PER_RANK / 2) * + * sizeof(int32_t) + * + * (mpi_rank * INTS_PER_RANK + 3 * INTS_PER_RANK / 2) * + * sizeof(int32_t) + * + * On even ranks, the targets of the reads should be + * buf_0, buf_1, buf_2, and buf_3 respectively. + * + * On odd ranks, the targets of the reads should be + * buf_3, buf_2, buf_1, and buf_0 respectively. + * + * This has the effect of ensuring that on at least + * some ranks, the read buffers are not in increasing + * address order. + */ + if (pass) { + + haddr_t base_addr = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + count = 4; + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr; + sizes[0] = (size_t)(INTS_PER_RANK / 4) * sizeof(int32_t); + + types[1] = H5FD_MEM_DRAW; + addrs[1] = base_addr + ((haddr_t)(INTS_PER_RANK / 4) * (haddr_t)(sizeof(int32_t))); + sizes[1] = (size_t)(INTS_PER_RANK / 4) * sizeof(int32_t); + + types[2] = H5FD_MEM_DRAW; + addrs[2] = base_addr + ((haddr_t)(INTS_PER_RANK / 2) * (haddr_t)(sizeof(int32_t))); + sizes[2] = (size_t)(INTS_PER_RANK / 4) * sizeof(int32_t); + + types[3] = H5FD_MEM_DRAW; + addrs[3] = base_addr + ((haddr_t)(3 * INTS_PER_RANK / 4) * (haddr_t)(sizeof(int32_t))); + sizes[3] = (size_t)INTS_PER_RANK / 4 * sizeof(int32_t); + + if (mpi_rank % 2 == 0) { + + bufs[0] = (void *)(&(buf_0[0])); + bufs[1] = (void *)(buf_1); + bufs[2] = (void *)(buf_2); + bufs[3] = (void *)(buf_3); + } + else { + + bufs[0] = (void *)(&(buf_3[0])); + bufs[1] = (void *)(buf_2); + bufs[2] = (void *)(buf_1); + bufs[3] = (void *)(buf_0); + } + + if (H5FDread_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread_vector() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) Verify that buf_0, buf_1, buf_2, and buf_3 contain + * the expected data. Note that this will be different + * on even vs. odd ranks. + */ + if (pass) { + + int base_index = mpi_rank * INTS_PER_RANK; + + for (i = 0; ((pass) && (i < INTS_PER_RANK / 4)); i++) { + + if (((mpi_rank % 2 == 0) && (buf_0[i] != negative_fi_buf[base_index + i])) || + ((mpi_rank % 2 == 1) && (buf_3[i] != negative_fi_buf[base_index + i]))) { + + pass = FALSE; + failure_mssg = "Unexpected value in buf (1).\n"; + } + } + + base_index += INTS_PER_RANK / 4; + + for (i = 0; ((pass) && (i < INTS_PER_RANK / 4)); i++) { + + if (((mpi_rank % 2 == 0) && (buf_1[i] != negative_fi_buf[base_index + i])) || + ((mpi_rank % 2 == 1) && (buf_2[i] != negative_fi_buf[base_index + i]))) { + + pass = FALSE; + failure_mssg = "Unexpected value in buf (2).\n"; + } + } + + base_index += INTS_PER_RANK / 4; + + for (i = 0; ((pass) && (i < INTS_PER_RANK / 4)); i++) { + + if (((mpi_rank % 2 == 0) && (buf_2[i] != negative_fi_buf[base_index + i])) || + ((mpi_rank % 2 == 1) && (buf_1[i] != negative_fi_buf[base_index + i]))) { + + pass = FALSE; + failure_mssg = "Unexpected value in buf (3).\n"; + } + } + + base_index += INTS_PER_RANK / 4; + + for (i = 0; ((pass) && (i < INTS_PER_RANK / 4)); i++) { + + if (((mpi_rank % 2 == 0) && (buf_3[i] != negative_fi_buf[base_index + i])) || + ((mpi_rank % 2 == 1) && (buf_0[i] != negative_fi_buf[base_index + i]))) { + + pass = FALSE; + failure_mssg = "Unexpected value in buf (4).\n"; + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 7) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 8) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_read_test_3() */ + +/*------------------------------------------------------------------------- + * Function: vector_read_test_4() + * + * Purpose: Test vector I/O reads with vectors of different lengths + * and entry sizes across the ranks. Vectors are not, in + * general, sorted in increasing address order. Further, + * reads are not, in general, contiguous. + * + * 1) Open the test file with the specified VFD, set the eoa. + * and setup the DXPL. + * + * 2) Using rank zero, write the entire increasing_fi_buf to + * the file. + * + * 3) Barrier + * + * 4) Set all cells of read_fi_buf to zero. + * + * 5) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector read between base_addr and + * base_addr + INTS_PER_RANK * sizeof(int32_t) - 1 + * as follows: + * + * if ( rank % 4 == 0 ) construct a vector that reads: + * + * INTS_PER_RANK / 4 * sizeof(int32_t) bytes + * starting at base_addr + INTS_PER_RANK / 2 * + * sizeof(int32_t), + * + * INTS_PER_RANK / 8 * sizeof(int32_t) bytes + * starting at base_addr + INTS_PER_RANK / 4 * + * sizeof(int32_t), and + * + * INTS_PER_RANK / 16 * sizeof(int32_t) butes + * starting at base_addr + INTS_PER_RANK / 16 * + * sizeof(int32_t) + * + * to the equivalent locations in read_fi_buf + * + * if ( rank % 4 == 1 ) construct a vector that reads: + * + * ((INTS_PER_RANK / 2) - 2) * sizeof(int32_t) + * bytes starting at base_addr + sizeof(int32_t), and + * + * ((INTS_PER_RANK / 2) - 2) * sizeof(int32_t) bytes + * starting at base_addr + (INTS_PER_RANK / 2 + 1) * + * sizeof(int32_t). + * + * to the equivalent locations in read_fi_buf + * + * if ( rank % 4 == 2 ) construct a vector that reads: + * + * sizeof(int32_t) bytes starting at base_index + + * (INTS_PER_RANK / 2) * sizeof int32_t. + * + * to the equivalent locations in read_fi_buf + * + * if ( rank % 4 == 3 ) construct and read the empty vector + * + * 6) On each rank, verify that read_fi_buf contains the + * the expected values -- that is the matching values from + * increasing_fi_buf where ever there was a read, and zero + * otherwise. + * + * 7) Barrier. + * + * 8) Close the test file. + * + * 9) On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/26/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_read_test_4(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_read_test_4()"; + char test_title[120]; + char filename[512]; + haddr_t eoa; + haddr_t base_addr; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + int j; + int k; + int base_index; + uint32_t count = 0; + H5FD_mem_t types[4]; + haddr_t addrs[4]; + size_t sizes[4]; + void * bufs[4]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector read test 4 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector read test 4 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector read test 4 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Using rank zero, write the entire negative_fi_buf to + * the file. + */ + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (mpi_rank == 0) { + + if (H5FDwrite(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)increasing_fi_buf) < + 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite() on rank 0 failed.\n"; + } + } + } + + /* 3) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) Set all cells of read_fi_buf to zero. */ + if (pass) { + + for (i = 0; i < mpi_size * INTS_PER_RANK; i++) { + + read_fi_buf[i] = 0; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector read between base_addr and + * base_addr + INTS_PER_RANK * sizeof(int32_t) - 1 + * as follows: + */ + if (pass) { + + base_index = mpi_rank * INTS_PER_RANK; + base_addr = (haddr_t)base_index * (haddr_t)sizeof(int32_t); + + if ((mpi_rank % 4) == 0) { + + /* if ( rank % 4 == 0 ) construct a vector that reads: + * + * INTS_PER_RANK / 4 * sizeof(int32_t) bytes + * starting at base_addr + INTS_PER_RANK / 2 * + * sizeof(int32_t), + * + * INTS_PER_RANK / 8 * sizeof(int32_t) bytes + * starting at base_addr + INTS_PER_RANK / 4 * + * sizeof(int32_t), and + * + * INTS_PER_RANK / 16 * sizeof(int32_t) butes + * starting at base_addr + INTS_PER_RANK / 16 * + * sizeof(int32_t) + * + * to the equivalent locations in read_fi_buf + */ + + count = 3; + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 2) * sizeof(int32_t)); + sizes[0] = (size_t)(INTS_PER_RANK / 4) * sizeof(int32_t); + bufs[0] = (void *)(&(read_fi_buf[base_index + (INTS_PER_RANK / 2)])); + + types[1] = H5FD_MEM_DRAW; + addrs[1] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 4) * sizeof(int32_t)); + sizes[1] = (size_t)(INTS_PER_RANK / 8) * sizeof(int32_t); + bufs[1] = (void *)(&(read_fi_buf[base_index + (INTS_PER_RANK / 4)])); + + types[2] = H5FD_MEM_DRAW; + addrs[2] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 16) * sizeof(int32_t)); + sizes[2] = (size_t)(INTS_PER_RANK / 16) * sizeof(int32_t); + bufs[2] = (void *)(&(read_fi_buf[base_index + (INTS_PER_RANK / 16)])); + } + else if ((mpi_rank % 4) == 1) { + + /* if ( rank % 4 == 1 ) construct a vector that reads: + * + * ((INTS_PER_RANK / 2) - 2) * sizeof(int32_t) + * bytes starting at base_addr + sizeof(int32_t), and + * + * ((INTS_PER_RANK / 2) - 2) * sizeof(int32_t) bytes + * starting at base_addr + (INTS_PER_RANK / 2 + 1) * + * sizeof(int32_t). + * + * to the equivalent locations in read_fi_buf + */ + count = 2; + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr + (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)((INTS_PER_RANK / 2) - 2) * sizeof(int32_t); + bufs[0] = (void *)(&(read_fi_buf[base_index + 1])); + + types[1] = H5FD_MEM_DRAW; + addrs[1] = base_addr + (haddr_t)((size_t)((INTS_PER_RANK / 2) + 1) * sizeof(int32_t)); + sizes[1] = (size_t)((INTS_PER_RANK / 2) - 2) * sizeof(int32_t); + bufs[1] = (void *)(&(read_fi_buf[base_index + (INTS_PER_RANK / 2) + 1])); + } + else if ((mpi_rank % 4) == 2) { + + /* if ( rank % 4 == 2 ) construct a vector that reads: + * + * sizeof(int32_t) bytes starting at base_index + + * (INTS_PER_RANK / 2) * sizeof int32_t. + * + * to the equivalent locations in read_fi_buf + */ + count = 1; + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 2) * sizeof(int32_t)); + sizes[0] = sizeof(int32_t); + bufs[0] = (void *)(&(read_fi_buf[base_index + (INTS_PER_RANK / 2)])); + } + else if ((mpi_rank % 4) == 3) { + + /* if ( rank % 4 == 3 ) construct and read the empty vector */ + + count = 0; + } + + if (H5FDread_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread_vector() failed (1).\n"; + } + } + + /* 6) On each rank, verify that read_fi_buf contains the + * the expected values -- that is the matching values from + * increasing_fi_buf where ever there was a read, and zero + * otherwise. + */ + if (pass) { + + for (i = 0; ((pass) && (i < mpi_size)); i++) { + + base_index = i * INTS_PER_RANK; +#if 1 + for (j = base_index; j < base_index + INTS_PER_RANK; j++) { + + k = j - base_index; +#else + for (k = 0; k < INTS_PER_RANK; k++) { + + j = k + base_index; +#endif + + if (i == mpi_rank) { + + switch (i % 4) { + + case 0: + if (((INTS_PER_RANK / 2) <= k) && (k < (3 * (INTS_PER_RANK / 4)))) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.1)"; + HDfprintf(stdout, "\nread_fi_buf[%d] = %d, increasing_fi_buf[%d] = %d\n", + j, read_fi_buf[j], j, increasing_fi_buf[j]); + } + } + else if (((INTS_PER_RANK / 4) <= k) && (k < (3 * (INTS_PER_RANK / 8)))) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.2)"; + } + } + else if (((INTS_PER_RANK / 16) <= k) && (k < (INTS_PER_RANK / 8))) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.3)"; + } + } + else { + + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.4)"; + } + } + break; + + case 1: + if ((1 <= k) && (k <= ((INTS_PER_RANK / 2) - 2))) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2.1)"; + } + } + else if ((((INTS_PER_RANK / 2) + 1) <= k) && (k <= (INTS_PER_RANK - 2))) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2.2)"; + } + } + else { + + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2.3)"; + } + } + break; + + case 2: + if (k == INTS_PER_RANK / 2) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3.1)"; + } + } + else { + + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3.2)"; + } + } + break; + + case 3: + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (4)"; + } + break; + + default: + HDassert(FALSE); /* should be un-reachable */ + break; + } + } + else if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (5)"; + } + } /* end for loop */ + } /* end for loop */ + } /* end if */ + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 7) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 8) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_read_test_4() */ + +/*------------------------------------------------------------------------- + * Function: vector_read_test_5() + * + * Purpose: Test correct management of the sizes[] array optimization, + * where, if sizes[i] == 0, we use sizes[i - 1] as the value + * of size[j], for j >= i. + * + * 1) Open the test file with the specified VFD, set the eoa. + * and setup the DXPL. + * + * 2) Using rank zero, write the entire increasing_fi_buf to + * the file. + * + * 3) Barrier + * + * 4) Set all cells of read_fi_buf to zero. + * + * 5) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector read between base_addr and + * base_addr + INTS_PER_RANK * sizeof(int32_t) - 1 + * that reads every 16th integer located in that + * that range starting at base_addr. Use a sizes[] + * array of length 2, with sizes[0] set to sizeof(int32_t), + * and sizes[1] = 0. + * + * Read the integers into the corresponding locations in + * read_fi_buf. + * + * 6) On each rank, verify that read_fi_buf contains the + * the expected values -- that is the matching values from + * increasing_fi_buf where ever there was a read, and zero + * otherwise. + * + * 7) Barrier. + * + * 8) Close the test file. + * + * 9) On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/26/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_read_test_5(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_read_test_5()"; + char test_title[120]; + char filename[512]; + haddr_t eoa; + haddr_t base_addr; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + int j; + int base_index; + uint32_t count = 0; + H5FD_mem_t types[(INTS_PER_RANK / 16) + 1]; + haddr_t addrs[(INTS_PER_RANK / 16) + 1]; + size_t sizes[2]; + void * bufs[(INTS_PER_RANK / 16) + 1]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector read test 5 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector read test 5 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector read test 5 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Using rank zero, write the entire negative_fi_buf to + * the file. + */ + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (mpi_rank == 0) { + + if (H5FDwrite(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)increasing_fi_buf) < + 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite() on rank 0 failed.\n"; + } + } + } + + /* 3) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) Set all cells of read_fi_buf to zero. */ + if (pass) { + + for (i = 0; i < mpi_size * INTS_PER_RANK; i++) { + + read_fi_buf[i] = 0; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector read between base_addr and + * base_addr + INTS_PER_RANK * sizeof(int32_t) - 1 + * that reads every 16th integer located in that + * that range starting at base_addr. Use a sizes[] + * array of length 2, with sizes[0] set to sizeof(int32_t), + * and sizes[1] = 0. + * + * Read the integers into the corresponding locations in + * read_fi_buf. + */ + if (pass) { + + base_index = (mpi_rank * INTS_PER_RANK); + base_addr = (haddr_t)base_index * (haddr_t)sizeof(int32_t); + + count = INTS_PER_RANK / 16; + sizes[0] = sizeof(int32_t); + sizes[1] = 0; + + for (i = 0; i < INTS_PER_RANK / 16; i++) { + + types[i] = H5FD_MEM_DRAW; + addrs[i] = base_addr + ((haddr_t)(16 * i) * (haddr_t)sizeof(int32_t)); + bufs[i] = (void *)(&(read_fi_buf[base_index + (i * 16)])); + } + + if (H5FDread_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread_vector() failed (1).\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) On each rank, verify that read_fi_buf contains the + * the expected values -- that is the matching values from + * increasing_fi_buf where ever there was a read, and zero + * otherwise. + */ + if (pass) { + + for (i = 0; ((pass) && (i < mpi_size)); i++) { + + base_index = i * INTS_PER_RANK; + + for (j = base_index; j < base_index + INTS_PER_RANK; j++) { + + if ((i == mpi_rank) && (j % 16 == 0)) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1)"; + } + } + else if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2)"; + } + } /* end for loop */ + } /* end for loop */ + } /* end if */ + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 7) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 8) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_read_test_5() */ + +/*------------------------------------------------------------------------- + * Function: vector_write_test_1() + * + * Purpose: Simple vector write test: + * + * 1) Open the test file with the specified VFD, set the eoa, + * and setup the DXPL. + * + * 2) Write the entire increasing_fi_buf to the file, with + * exactly one buffer per vector per rank. Use either + * independent or collective I/O as specified. + * + * 3) Barrier + * + * 4) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf. Report failure + * if any differences are detected. + * + * 5) Close the test file. + * + * 6) On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/26/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_write_test_1(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_write_test_1()"; + char test_title[120]; + char filename[512]; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + uint32_t count; + H5FD_mem_t types[1]; + haddr_t addrs[1]; + size_t sizes[1]; + void * bufs[1]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector write test 1 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector write test 1 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector write test 1 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Write the entire increasing_fi_buf to the file, with + * exactly one buffer per vector per rank. Use either + * independent or collective I/O as specified. + */ + + if (pass) { + + count = 1; + types[0] = H5FD_MEM_DRAW; + addrs[0] = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)INTS_PER_RANK * sizeof(int32_t); + bufs[0] = (void *)(&(increasing_fi_buf[mpi_rank * INTS_PER_RANK])); + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 3) Barrier + */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf. Report failure + * if any differences are detected. + */ + + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (H5FDread(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)read_fi_buf) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread() failed.\n"; + } + + for (i = 0; i < mpi_size * INTS_PER_RANK; i++) { + + if (read_fi_buf[i] != increasing_fi_buf[i]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file"; + break; + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_write_test_1() */ + +/*------------------------------------------------------------------------- + * Function: vector_write_test_2() + * + * Purpose: Test vector I/O writes in which only some ranks participate. + * Depending on the collective parameter, these writes will + * be either collective or independent. + * + * 1) Open the test file with the specified VFD, and set + * the eoa. + * + * 2) Write the odd blocks of the increasing_fi_buf to the file, + * with the odd ranks writing the odd blocks, and the even + * ranks writing an empty vector. + * + * Here, a "block" of the increasing_fi_buf is a sequence + * of integers in increasing_fi_buf of length INTS_PER_RANK, + * and with start index a multiple of INTS_PER_RANK. + * + * 3) Write the even blocks of the negative_fi_buf to the file, + * with the even ranks writing the even blocks, and the odd + * ranks writing an empty vector. + * + * 4) Barrier + * + * 4) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf and negative_fi_buf + * as appropriate. Report failure if any differences are + * detected. + * + * 5) Close the test file. On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/28/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_write_test_2(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_write_test_2()"; + char test_title[120]; + char filename[512]; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + int j; + uint32_t count; + H5FD_mem_t types[1]; + haddr_t addrs[1]; + size_t sizes[1]; + void * bufs[1]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector write test 2 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector write test 2 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector write test 2 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Write the odd blocks of the increasing_fi_buf to the file, + * with the odd ranks writing the odd blocks, and the even + * ranks writing an empty vector. + * + * Here, a "block" of the increasing_fi_buf is a sequence + * of integers in increasing_fi_buf of length INTS_PER_RANK, + * and with start index a multiple of INTS_PER_RANK. + */ + if (pass) { + + if (mpi_rank % 2 == 1) { /* odd ranks */ + + count = 1; + types[0] = H5FD_MEM_DRAW; + addrs[0] = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)INTS_PER_RANK * sizeof(int32_t); + bufs[0] = (void *)(&(increasing_fi_buf[mpi_rank * INTS_PER_RANK])); + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (1).\n"; + } + } + else { /* even ranks */ + + if (H5FDwrite_vector(lf, dxpl_id, 0, NULL, NULL, NULL, NULL) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (2).\n"; + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 3) Write the even blocks of the negative_fi_buf to the file, + * with the even ranks writing the even blocks, and the odd + * ranks writing an empty vector. + */ + if (pass) { + + if (mpi_rank % 2 == 1) { /* odd ranks */ + + if (H5FDwrite_vector(lf, dxpl_id, 0, NULL, NULL, NULL, NULL) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (3).\n"; + } + } + else { /* even ranks */ + + count = 1; + types[0] = H5FD_MEM_DRAW; + addrs[0] = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)INTS_PER_RANK * sizeof(int32_t); + bufs[0] = (void *)(&(negative_fi_buf[mpi_rank * INTS_PER_RANK])); + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (4).\n"; + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) Barrier + */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf. Report failure + * if any differences are detected. + */ + + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (H5FDread(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)read_fi_buf) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread() failed.\n"; + } + + for (i = 0; ((pass) && (i < mpi_size)); i++) { + + if (i % 2 == 1) { /* odd block */ + + for (j = i * INTS_PER_RANK; ((pass) && (j < (i + 1) * INTS_PER_RANK)); j++) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file"; + break; + } + } + } + else { /* even block */ + + for (j = i * INTS_PER_RANK; ((pass) && (j < (i + 1) * INTS_PER_RANK)); j++) { + + if (read_fi_buf[j] != negative_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file"; + break; + } + } + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_write_test_2() */ + +/*------------------------------------------------------------------------- + * Function: vector_write_test_3() + * + * Purpose: Test vector I/O writes with vectors of multiple entries. + * For now, keep the vectors sorted in increasing address + * order. + * + * 1) Open the test file with the specified VFD, and set + * the eoa. + * + * 2) For each rank, construct a vector with base address + * (mpi_rank * INTS_PER_RANK) and writing all bytes from + * that address to ((mpi_rank + 1) * INTS_PER_RANK) - 1. + * Draw equal parts from increasing_fi_buf, + * decreasing_fi_buf, negative_fi_buf, and zero_fi_buf. + * + * Write to file. + * + * 3) Barrier + * + * 4) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf, + * decreasing_fi_buf, negative_fi_buf, and zero_fi_buf as + * appropriate. Report failure if any differences are + * detected. + * + * 5) Close the test file. On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/31/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_write_test_3(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_write_test_3()"; + char test_title[120]; + char filename[512]; + haddr_t base_addr; + int base_index; + int ints_per_write; + size_t bytes_per_write; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + int j; + uint32_t count; + H5FD_mem_t types[4]; + haddr_t addrs[4]; + size_t sizes[4]; + void * bufs[4]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector write test 3 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector write test 3 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector write test 3 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) For each rank, construct a vector with base address + * (mpi_rank * INTS_PER_RANK) and writing all bytes from + * that address to ((mpi_rank + 1) * INTS_PER_RANK) - 1. + * Draw equal parts from increasing_fi_buf, + * decreasing_fi_buf, negative_fi_buf, and zero_fi_buf. + * + * Write to file. + */ + if (pass) { + + count = 4; + + base_addr = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + ints_per_write = INTS_PER_RANK / 4; + bytes_per_write = (size_t)(ints_per_write) * sizeof(int32_t); + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr; + sizes[0] = bytes_per_write; + bufs[0] = (void *)(&(increasing_fi_buf[mpi_rank * INTS_PER_RANK])); + + types[1] = H5FD_MEM_DRAW; + addrs[1] = addrs[0] + (haddr_t)(bytes_per_write); + sizes[1] = bytes_per_write; + bufs[1] = (void *)(&(decreasing_fi_buf[(mpi_rank * INTS_PER_RANK) + (INTS_PER_RANK / 4)])); + + types[2] = H5FD_MEM_DRAW; + addrs[2] = addrs[1] + (haddr_t)(bytes_per_write); + sizes[2] = bytes_per_write; + bufs[2] = (void *)(&(negative_fi_buf[(mpi_rank * INTS_PER_RANK) + (INTS_PER_RANK / 2)])); + + types[3] = H5FD_MEM_DRAW; + addrs[3] = addrs[2] + (haddr_t)(bytes_per_write); + sizes[3] = bytes_per_write; + bufs[3] = (void *)(&(zero_fi_buf[(mpi_rank * INTS_PER_RANK) + (3 * (INTS_PER_RANK / 4))])); + +#if 0 /* JRM */ + HDfprintf(stdout, "addrs = { %lld, %lld, %lld, %lld}\n", + (long long)addrs[0], (long long)addrs[1], (long long)addrs[2], (long long)addrs[3]); + HDfprintf(stdout, "sizes = { %lld, %lld, %lld, %lld}\n", + (long long)sizes[0], (long long)sizes[1], (long long)sizes[2], (long long)sizes[3]); + HDfprintf(stdout, "bufs = { 0x%llx, 0x%llx, 0x%llx, 0x%llx}\n", + (unsigned long long)bufs[0], (unsigned long long)bufs[1], + (unsigned long long)bufs[2], (unsigned long long)bufs[3]); +#endif /* JRM */ + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (1).\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 3) Barrier + */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf, + * decreasing_fi_buf, negative_fi_buf, and zero_fi_buf as + * appropriate. Report failure if any differences are + * detected. + */ + + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (H5FDread(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)read_fi_buf) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread() failed.\n"; + } + + for (i = 0; ((pass) && (i < mpi_size)); i++) { + + base_index = i * INTS_PER_RANK; + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1)"; + break; + } + } + + base_index += (INTS_PER_RANK / 4); + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != decreasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2)"; + break; + } + } + + base_index += (INTS_PER_RANK / 4); + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != negative_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3)"; + break; + } + } + + base_index += (INTS_PER_RANK / 4); + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != zero_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3)"; + break; + } + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_write_test_3() */ + +/*------------------------------------------------------------------------- + * Function: vector_write_test_4() + * + * Purpose: Test vector I/O writes with vectors of multiple entries. + * For now, keep the vectors sorted in increasing address + * order. + * + * This test differs from vector_write_test_3() in the order + * in which the file image buffers appear in the vector + * write. This guarantees that at least one of these + * tests will present buffers with non-increasing addresses + * in RAM. + * + * 1) Open the test file with the specified VFD, and set + * the eoa. + * + * 2) For each rank, construct a vector with base address + * (mpi_rank * INTS_PER_RANK) and writing all bytes from + * that address to ((mpi_rank + 1) * INTS_PER_RANK) - 1. + * Draw equal parts from zero_fi_buf, negative_fi_buf, + * decreasing_fi_buf, and increasing_fi_buf. + * + * Write to file. + * + * 3) Barrier + * + * 4) On each rank, read the entire file into the read_fi_buf, + * and compare against zero_fi_buf, negative_fi_buf, + * decreasing_fi_buf, and increasing_fi_buf as + * appropriate. Report failure if any differences are + * detected. + * + * 5) Close the test file. On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/31/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_write_test_4(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_write_test_4()"; + char test_title[120]; + char filename[512]; + haddr_t base_addr; + int base_index; + int ints_per_write; + size_t bytes_per_write; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + int j; + uint32_t count; + H5FD_mem_t types[4]; + haddr_t addrs[4]; + size_t sizes[4]; + void * bufs[4]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector write test 4 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector write test 4 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector write test 4 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) For each rank, construct a vector with base address + * (mpi_rank * INTS_PER_RANK) and writing all bytes from + * that address to ((mpi_rank + 1) * INTS_PER_RANK) - 1. + * Draw equal parts from increasing_fi_buf, + * decreasing_fi_buf, negative_fi_buf, and zero_fi_buf. + * + * Write to file. + */ + if (pass) { + + count = 4; + + base_addr = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + ints_per_write = INTS_PER_RANK / 4; + bytes_per_write = (size_t)(ints_per_write) * sizeof(int32_t); + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr; + sizes[0] = bytes_per_write; + bufs[0] = (void *)(&(zero_fi_buf[mpi_rank * INTS_PER_RANK])); + + types[1] = H5FD_MEM_DRAW; + addrs[1] = addrs[0] + (haddr_t)(bytes_per_write); + sizes[1] = bytes_per_write; + bufs[1] = (void *)(&(negative_fi_buf[(mpi_rank * INTS_PER_RANK) + (INTS_PER_RANK / 4)])); + + types[2] = H5FD_MEM_DRAW; + addrs[2] = addrs[1] + (haddr_t)(bytes_per_write); + sizes[2] = bytes_per_write; + bufs[2] = (void *)(&(decreasing_fi_buf[(mpi_rank * INTS_PER_RANK) + (INTS_PER_RANK / 2)])); + + types[3] = H5FD_MEM_DRAW; + addrs[3] = addrs[2] + (haddr_t)(bytes_per_write); + sizes[3] = bytes_per_write; + bufs[3] = (void *)(&(increasing_fi_buf[(mpi_rank * INTS_PER_RANK) + (3 * (INTS_PER_RANK / 4))])); + +#if 0 /* JRM */ + HDfprintf(stdout, "addrs = { %lld, %lld, %lld, %lld}\n", + (long long)addrs[0], (long long)addrs[1], (long long)addrs[2], (long long)addrs[3]); + HDfprintf(stdout, "sizes = { %lld, %lld, %lld, %lld}\n", + (long long)sizes[0], (long long)sizes[1], (long long)sizes[2], (long long)sizes[3]); + HDfprintf(stdout, "bufs = { 0x%llx, 0x%llx, 0x%llx, 0x%llx}\n", + (unsigned long long)bufs[0], (unsigned long long)bufs[1], + (unsigned long long)bufs[2], (unsigned long long)bufs[3]); +#endif /* JRM */ + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (1).\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 3) Barrier + */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf, + * decreasing_fi_buf, negative_fi_buf, and zero_fi_buf as + * appropriate. Report failure if any differences are + * detected. + */ + + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (H5FDread(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)read_fi_buf) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread() failed.\n"; + } + + for (i = 0; ((pass) && (i < mpi_size)); i++) { + + base_index = i * INTS_PER_RANK; + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != zero_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1)"; + break; + } + } + + base_index += (INTS_PER_RANK / 4); + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != negative_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2)"; + break; + } + } + + base_index += (INTS_PER_RANK / 4); + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != decreasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3)"; + break; + } + } + + base_index += (INTS_PER_RANK / 4); + + for (j = base_index; j < base_index + (INTS_PER_RANK / 4); j++) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3)"; + break; + } + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_write_test_4() */ + +/*------------------------------------------------------------------------- + * Function: vector_write_test_5() + * + * Purpose: Test vector I/O writes with vectors of different lengths + * and entry sizes across the ranks. Vectors are not, in + * general, sorted in increasing address order. Further, + * writes are not, in general, contiguous. + * + * 1) Open the test file with the specified VFD, and set + * the eoa. + * + * 2) Set the test file in a known state by writing zeros + * to all bytes in the test file. Since we have already + * tested this, do this via a vector write of zero_fi_buf. + * + * 3) Barrier + * + * 4) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector write between base_addr and + * base_addr + INTS_PER_RANK * sizeof(int32_t) - 1 + * as follows: + * + * if ( rank % 4 == 0 ) construct a vector that writes: + * + * negative_fi_buf starting at base_index + + * INTS_PER_RANK / 2 and running for INTS_PER_RANK / 4 + * entries, + * + * decreasing_fi_buf starting at base_index + + * INTS_PER_RANK / 4 and running for INTS_PER_RANK / 8 + * entries, and + * + * increasing_fi_buf starting at base_index + + * INTS_PER_RANK / 16 and running for INTS_PER_RANK / 16 + * entries + * + * to the equivalent locations in the file. + * + * if ( rank % 4 == 1 ) construct a vector that writes: + * + * increasing_fi_buf starting at base_index + 1 and + * running for (INTS_PER_RANK / 2) - 2 entries, and + * + * decreasing_fi_buf startomg at base_index + + * INTS_PER_RANK / 2 + 1 and running for (INTS_PER_RANK / 2) + * - 2 entries + * + * if ( rank % 4 == 2 ) construct a vector that writes: + * + * negative_fi_buf starting at base_index + + * INTS_PER_RANK / 2 and running for one entry. + * + * if ( rank % 4 == 3 ) construct and write the empty vector + * + * 5) Barrier + * + * 6) On each rank, read the entire file into the read_fi_buf, + * and compare against zero_fi_buf, negative_fi_buf, + * decreasing_fi_buf, and increasing_fi_buf as + * appropriate. Report failure if any differences are + * detected. + * + * 7) Close the test file. On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/31/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_write_test_5(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_write_test_5()"; + char test_title[120]; + char filename[512]; + haddr_t base_addr; + int base_index; + haddr_t eoa; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + int j; + int k; + uint32_t count; + H5FD_mem_t types[4]; + haddr_t addrs[4]; + size_t sizes[4]; + void * bufs[4]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector write test 5 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector write test 5 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector write test 5 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Set the test file in a known state by writing zeros + * to all bytes in the test file. Since we have already + * tested this, do this via a vector write of zero_fi_buf. + */ + if (pass) { + + count = 1; + types[0] = H5FD_MEM_DRAW; + addrs[0] = (haddr_t)mpi_rank * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)INTS_PER_RANK * sizeof(int32_t); + bufs[0] = (void *)(&(zero_fi_buf[mpi_rank * INTS_PER_RANK])); + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed.\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 3) Barrier + */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector write between base_addr and + * base_addr + INTS_PER_RANK * sizeof(int32_t) - 1 + * as follows: + */ + if (pass) { + + base_index = mpi_rank * INTS_PER_RANK; + base_addr = (haddr_t)((size_t)base_index * sizeof(int32_t)); + + if ((mpi_rank % 4) == 0) { + + /* if ( rank % 4 == 0 ) construct a vector that writes: + * + * negative_fi_buf starting at base_index + + * INTS_PER_RANK / 2 and running for INTS_PER_RANK / 4 + * entries, + * + * decreasing_fi_buf starting at base_index + + * INTS_PER_RANK / 4 and running for INTS_PER_RANK / 8 + * entries, and + * + * increasing_fi_buf starting at base_index + + * INTS_PER_RANK / 16 and running for INTS_PER_RANK / 16 + * entries + * + * to the equivalent locations in the file. + */ + count = 3; + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 2) * sizeof(int32_t)); + sizes[0] = (size_t)(INTS_PER_RANK / 4) * sizeof(int32_t); + bufs[0] = (void *)(&(negative_fi_buf[base_index + (INTS_PER_RANK / 2)])); + + types[1] = H5FD_MEM_DRAW; + addrs[1] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 4) * sizeof(int32_t)); + sizes[1] = (size_t)(INTS_PER_RANK / 8) * sizeof(int32_t); + bufs[1] = (void *)(&(decreasing_fi_buf[base_index + (INTS_PER_RANK / 4)])); + + types[2] = H5FD_MEM_DRAW; + addrs[2] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 16) * sizeof(int32_t)); + sizes[2] = (size_t)(INTS_PER_RANK / 16) * sizeof(int32_t); + bufs[2] = (void *)(&(increasing_fi_buf[base_index + (INTS_PER_RANK / 16)])); + } + else if ((mpi_rank % 4) == 1) { + + /* if ( rank % 4 == 1 ) construct a vector that writes: + * + * increasing_fi_buf starting at base_index + 1 and + * running for (INTS_PER_RANK / 2) - 2 entries, and + * + * decreasing_fi_buf startomg at base_addr + + * INTS_PER_RANK / 2 + 1 and running for (INTS_PER_RANK / 2) + * - 2 entries + * + * to the equivalent locations in the file. + */ + count = 2; + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr + (haddr_t)(sizeof(int32_t)); + sizes[0] = (size_t)((INTS_PER_RANK / 2) - 2) * sizeof(int32_t); + bufs[0] = (void *)(&(increasing_fi_buf[base_index + 1])); + + types[1] = H5FD_MEM_DRAW; + addrs[1] = base_addr + (haddr_t)((size_t)((INTS_PER_RANK / 2) + 1) * sizeof(int32_t)); + sizes[1] = (size_t)((INTS_PER_RANK / 2) - 2) * sizeof(int32_t); + bufs[1] = (void *)(&(decreasing_fi_buf[base_index + (INTS_PER_RANK / 2) + 1])); + } + else if ((mpi_rank % 4) == 2) { + + /* if ( rank % 4 == 2 ) construct a vector that writes: + * + * negative_fi_buf starting at base_index + + * INTS_PER_RANK / 2 and running for one entry. + * + * to the equivalent location in the file. + */ + count = 1; + + types[0] = H5FD_MEM_DRAW; + addrs[0] = base_addr + (haddr_t)((size_t)(INTS_PER_RANK / 2) * sizeof(int32_t)); + sizes[0] = sizeof(int32_t); + bufs[0] = (void *)(&(negative_fi_buf[base_index + (INTS_PER_RANK / 2)])); + } + else if ((mpi_rank % 4) == 3) { + + /* if ( rank % 4 == 3 ) construct and write the empty vector */ + + count = 0; + } + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (1).\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) On each rank, read the entire file into the read_fi_buf, + * and compare against increasing_fi_buf, + * decreasing_fi_buf, negative_fi_buf, and zero_fi_buf as + * appropriate. Report failure if any differences are + * detected. + */ + + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (H5FDread(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)read_fi_buf) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread() failed.\n"; + } + + for (i = 0; ((pass) && (i < mpi_size)); i++) { + + base_index = i * INTS_PER_RANK; + + for (j = base_index; j < base_index + INTS_PER_RANK; j++) { + + k = j - base_index; + + switch (i % 4) { + + case 0: + if (((INTS_PER_RANK / 2) <= k) && (k < (3 * (INTS_PER_RANK / 4)))) { + + if (read_fi_buf[j] != negative_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.1)"; + } + } + else if (((INTS_PER_RANK / 4) <= k) && (k < (3 * (INTS_PER_RANK / 8)))) { + + if (read_fi_buf[j] != decreasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.2)"; + } + } + else if (((INTS_PER_RANK / 16) <= k) && (k < (INTS_PER_RANK / 8))) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.3)"; + } + } + else { + + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1.4)"; + } + } + break; + + case 1: + if ((1 <= k) && (k <= ((INTS_PER_RANK / 2) - 2))) { + + if (read_fi_buf[j] != increasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2.1)"; + } + } + else if ((((INTS_PER_RANK / 2) + 1) <= k) && (k <= (INTS_PER_RANK - 2))) { + + if (read_fi_buf[j] != decreasing_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2.2)"; + } + } + else { + + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2.3)"; + } + } + break; + + case 2: + if (k == INTS_PER_RANK / 2) { + + if (read_fi_buf[j] != negative_fi_buf[j]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3.1)"; + } + } + else { + + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (3.2)"; + } + } + break; + + case 3: + if (read_fi_buf[j] != 0) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (4)"; + } + break; + + default: + HDassert(FALSE); /* should be un-reachable */ + break; + } + } + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 7) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_write_test_5() */ + +/*------------------------------------------------------------------------- + * Function: vector_write_test_6() + * + * Purpose: Test correct management of the sizes[] array optimization, + * where, if sizes[i] == 0, we use sizes[i - 1] as the value + * of size[j], for j >= i. + * + * 1) Open the test file with the specified VFD, set the eoa. + * and setup the DXPL. + * + * 2) Using rank zero, write the entire zero_fi_buf to + * the file. + * + * 3) Barrier + * + * 4) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector write from increasing_fi_buf between + * base_addr and base_addr + INTS_PER_RANK * + * sizeof(int32_t) - 1 that writes every 16th integer + * located in that range starting at base_addr. + * Use a sizes[] array of length 2, with sizes[0] set + * to sizeof(int32_t), and sizes[1] = 0. + * + * Write the integers into the corresponding locations in + * the file. + * + * 5) Barrier + * + * 6) On each rank, read the entire file into the read_fi_buf, + * and compare against zero_fi_buf, and increasing_fi_buf + * as appropriate. Report failure if any differences are + * detected. + * + * 7) Barrier. + * + * 8) Close the test file. + * + * 9) On rank 0, delete the test file. + * + * Return: FALSE on success, TRUE if any errors are detected. + * + * Programmer: John Mainzer + * 3/26/21 + * + * Modifications: + * + * None. + * + *------------------------------------------------------------------------- + */ + +static unsigned +vector_write_test_6(int file_name_id, int mpi_rank, int mpi_size, H5FD_mpio_xfer_t xfer_mode, + H5FD_mpio_collective_opt_t coll_opt_mode, const char *vfd_name) +{ + const char *fcn_name = "vector_write_test_6()"; + char test_title[120]; + char filename[512]; + haddr_t eoa; + haddr_t base_addr; + hbool_t show_progress = FALSE; + hid_t fapl_id = -1; /* file access property list ID */ + hid_t dxpl_id = -1; /* data access property list ID */ + H5FD_t * lf = NULL; /* VFD struct ptr */ + int cp = 0; + int i; + int base_index; + uint32_t count = 0; + H5FD_mem_t types[(INTS_PER_RANK / 16) + 1]; + haddr_t addrs[(INTS_PER_RANK / 16) + 1]; + size_t sizes[2]; + void * bufs[(INTS_PER_RANK / 16) + 1]; + + pass = TRUE; + + if (mpi_rank == 0) { + + if (xfer_mode == H5FD_MPIO_INDEPENDENT) { + + sprintf(test_title, "parallel vector write test 6 -- %s / independent", vfd_name); + } + else if (coll_opt_mode == H5FD_MPIO_INDIVIDUAL_IO) { + + sprintf(test_title, "parallel vector write test 6 -- %s / col op / ind I/O", vfd_name); + } + else { + + HDassert(coll_opt_mode == H5FD_MPIO_COLLECTIVE_IO); + + sprintf(test_title, "parallel vector write test 6 -- %s / col op / col I/O", vfd_name); + } + + TESTING(test_title); + } + + show_progress = ((show_progress) && (mpi_rank == 0)); + + if (show_progress) + HDfprintf(stdout, "\n%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 1) Open the test file with the specified VFD, set the eoa, and setup the dxpl */ + if (pass) { + + eoa = (haddr_t)mpi_size * (haddr_t)INTS_PER_RANK * (haddr_t)(sizeof(int32_t)); + + setup_vfd_test_file(file_name_id, filename, mpi_size, xfer_mode, coll_opt_mode, vfd_name, eoa, &lf, + &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 2) Using rank zero, write the entire negative_fi_buf to + * the file. + */ + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (mpi_rank == 0) { + + if (H5FDwrite(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)zero_fi_buf) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite() on rank 0 failed.\n"; + } + } + } + + /* 3) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 4) For each rank, define base_index equal to: + * + * mpi_rank * INTS_PER_RANK + * + * and define base_addr equal to + * + * base_index * sizeof(int32_t). + * + * Setup a vector write from increasing_fi_buf between + * base_addr and base_addr + INTS_PER_RANK * + * sizeof(int32_t) - 1 that writes every 16th integer + * located in that range starting at base_addr. + * Use a sizes[] array of length 2, with sizes[0] set + * to sizeof(int32_t), and sizes[1] = 0. + * + * Write the integers into the corresponding locations in + * the file. + */ + if (pass) { + + base_index = (mpi_rank * INTS_PER_RANK); + base_addr = (haddr_t)base_index * (haddr_t)sizeof(int32_t); + + count = INTS_PER_RANK / 16; + sizes[0] = sizeof(int32_t); + sizes[1] = 0; + + for (i = 0; i < INTS_PER_RANK / 16; i++) { + + types[i] = H5FD_MEM_DRAW; + addrs[i] = base_addr + ((haddr_t)(16 * i) * (haddr_t)sizeof(int32_t)); + bufs[i] = (void *)(&(increasing_fi_buf[base_index + (i * 16)])); + } + + if (H5FDwrite_vector(lf, dxpl_id, count, types, addrs, sizes, bufs) < 0) { + + pass = FALSE; + failure_mssg = "H5FDwrite_vector() failed (1).\n"; + } + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 5) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 6) On each rank, read the entire file into the read_fi_buf, + * and compare against zero_fi_buf, and increasing_fi_buf + * as appropriate. Report failure if any differences are + * detected. + */ + if (pass) { + + size_t image_size = (size_t)mpi_size * (size_t)INTS_PER_RANK * sizeof(int32_t); + + if (H5FDread(lf, H5FD_MEM_DRAW, H5P_DEFAULT, (haddr_t)0, image_size, (void *)read_fi_buf) < 0) { + + pass = FALSE; + failure_mssg = "H5FDread() failed.\n"; + } + + for (i = 0; ((pass) && (i < mpi_size * INTS_PER_RANK)); i++) { + + if (i % 16 == 0) { + + if (read_fi_buf[i] != increasing_fi_buf[i]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (1)"; + } + } + else if (read_fi_buf[i] != zero_fi_buf[i]) { + + pass = FALSE; + failure_mssg = "unexpected data read from file (2)"; + } + } + } /* end if */ + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 7) Barrier */ + + if (pass) { + + MPI_Barrier(MPI_COMM_WORLD); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* 8) Close the test file and delete it (on rank 0 only). + * Close FAPL and DXPL. + */ + + if (pass) { + + takedown_vfd_test_file(mpi_rank, filename, &lf, &fapl_id, &dxpl_id); + } + + if (show_progress) + HDfprintf(stdout, "%s: cp = %d, pass = %d.\n", fcn_name, cp++, pass); + + /* report results */ + if (mpi_rank == 0) { + + if (pass) { + + PASSED(); + } + else { + + H5_FAILED(); + + if (show_progress) { + HDfprintf(stdout, "%s: failure_mssg = \"%s\"\n", fcn_name, failure_mssg); + } + } + } + + return (!pass); + +} /* vector_write_test_6() */ + +/*------------------------------------------------------------------------- + * Function: main + * + * Purpose: Run parallel VFD tests. + * + * Return: Success: 0 + * + * Failure: 1 + * + * Programmer: John Mainzer + * 3/2621/ + * + * Modifications: + * + *------------------------------------------------------------------------- + */ + +int +main(int argc, char **argv) +{ + unsigned nerrs = 0; + MPI_Comm comm = MPI_COMM_WORLD; + MPI_Info info = MPI_INFO_NULL; + int mpi_size; + int mpi_rank; + + MPI_Init(&argc, &argv); + MPI_Comm_size(MPI_COMM_WORLD, &mpi_size); + MPI_Comm_rank(MPI_COMM_WORLD, &mpi_rank); + + /* Attempt to turn off atexit post processing so that in case errors + * occur during the test and the process is aborted, it will not hang + * in the atexit post processing. If it does, it may try to make MPI + * calls which may not work. + */ + if (H5dont_atexit() < 0) + HDprintf("%d:Failed to turn off atexit processing. Continue.\n", mpi_rank); + + H5open(); + + if (mpi_rank == 0) { + HDprintf("=========================================\n"); + HDprintf("Parallel virtual file driver (VFD) tests\n"); + HDprintf(" mpi_size = %d\n", mpi_size); + HDprintf("=========================================\n"); + } + + if (mpi_size < 2) { + if (mpi_rank == 0) + HDprintf(" Need at least 2 processes. Exiting.\n"); + goto finish; + } + + alloc_and_init_file_images(mpi_size); + + if (!pass) { + + HDprintf("\nAllocation and initialize of file image buffers failed. Test aborted.\n"); + } + + MPI_Barrier(MPI_COMM_WORLD); + + // sleep(60); + + nerrs += + vector_read_test_1(0, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_1(0, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_1(0, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_read_test_2(1, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_2(1, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_2(1, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_read_test_3(2, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_3(2, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_3(2, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_read_test_4(3, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_4(3, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_4(3, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_read_test_5(4, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_5(4, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += vector_read_test_5(4, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_write_test_1(0, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_1(0, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_1(0, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_write_test_2(1, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_2(1, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_2(1, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_write_test_3(2, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_3(2, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_3(2, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_write_test_4(3, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_4(3, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_4(3, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_write_test_5(4, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_5(4, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_5(4, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + + nerrs += + vector_write_test_6(5, mpi_rank, mpi_size, H5FD_MPIO_INDEPENDENT, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_6(5, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_INDIVIDUAL_IO, "mpio"); + nerrs += + vector_write_test_6(5, mpi_rank, mpi_size, H5FD_MPIO_COLLECTIVE, H5FD_MPIO_COLLECTIVE_IO, "mpio"); + +finish: + + /* make sure all processes are finished before final report, cleanup + * and exit. + */ + MPI_Barrier(MPI_COMM_WORLD); + + if (mpi_rank == 0) { /* only process 0 reports */ + HDprintf("===================================\n"); + if (nerrs > 0) + HDprintf("***parallel vfd tests detected %d failures***\n", nerrs); + else + HDprintf("parallel vfd tests finished with no failures\n"); + HDprintf("===================================\n"); + } + + /* discard the file image buffers */ + free_file_images(); + + /* close HDF5 library */ + H5close(); + + /* MPI_Finalize must be called AFTER H5close which may use MPI calls */ + MPI_Finalize(); + + /* cannot just return (nerrs) because exit code is limited to 1byte */ + return (nerrs > 0); + +} /* main() */ |