diff options
Diffstat (limited to 'testpar')
| -rw-r--r-- | testpar/mpi-perf.c | 349 | ||||
| -rw-r--r-- | testpar/perf.c | 403 |
2 files changed, 0 insertions, 752 deletions
diff --git a/testpar/mpi-perf.c b/testpar/mpi-perf.c deleted file mode 100644 index 7b8cf4c..0000000 --- a/testpar/mpi-perf.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * (C) 1995-2001 Clemson University and Argonne National Laboratory. - * - * See COPYING in top-level directory. - * - * This is contributed by Robert Ross to the HDF5 software. - * and was called mpi-io-test.c - */ - -/* mpi-perf.c - * - * This is derived from code given to me by Rajeev Thakur. Dunno where - * it originated. - * - * It's purpose is to produce aggregate bandwidth numbers for varying - * block sizes, number of processors, an number of iterations. - * - * This is strictly an mpi program - it is used to test the MPI I/O - * functionality implemented by Romio. - * - * Compiling is usually easiest with something like: - * mpicc -Wall -Wstrict-prototypes mpi-io-test.c -o mpi-io-test - * - * NOTE: This code assumes that all command line arguments make it out to all - * the processes that make up the parallel job, which isn't always the case. - * So if it doesn't work on some platform, that might be why. - */ -/* Modifications: - * Albert Cheng, Apr 30, 20001 - * Changed MPI_File_open to use MPI_COMM_WORLD (was MPI_COMM_SELF). - * Albert Cheng, May 5, 20001 - * Changed MPI_File_seek then MPI_File_write or MPI_File_read to just - * MPI_File_write_at and MPI_File_read_at. Some compiler, e.g., IBM - * mpcc_r does not support MPI_File_seek and MPI_File_read or MPI_File_write. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <unistd.h> -#include <errno.h> -#include <string.h> -#include <sys/time.h> -#include <mpi.h> -#ifndef MPI_FILE_NULL /*MPIO may be defined in mpi.h already */ -# include <mpio.h> -#endif - - - -/* DEFAULT VALUES FOR OPTIONS */ -int64_t opt_block = 1048576*16; -int opt_iter = 1; -int opt_stripe = -1; -int opt_correct = 0; -int amode = O_RDWR | O_CREAT; -char opt_file[256] = "/foo/test.out\0"; -char opt_pvfstab[256] = "notset\0"; -int opt_pvfstab_set = 0; - -/* function prototypes */ -int parse_args(int argc, char **argv); -double Wtime(void); - -extern int errno; -extern int debug_on; - -/* globals needed for getopt */ -extern char *optarg; -extern int optind, opterr; - -int main(int argc, char **argv) -{ - char *buf, *tmp, *buf2, *tmp2, *check; - int i, j, mynod=0, nprocs=1, err, my_correct = 1, correct, myerrno; - double stim, etim; - double write_tim = 0; - double read_tim = 0; - double read_bw, write_bw; - double max_read_tim, max_write_tim; - double min_read_tim, min_write_tim; - double ave_read_tim, ave_write_tim; - int64_t iter_jump = 0; - int64_t seek_position = 0; - MPI_File fh; - MPI_Status status; - int nchars; - - /* startup MPI and determine the rank of this process */ - MPI_Init(&argc,&argv); - MPI_Comm_size(MPI_COMM_WORLD, &nprocs); - MPI_Comm_rank(MPI_COMM_WORLD, &mynod); - - /* parse the command line arguments */ - parse_args(argc, argv); - - if (mynod == 0) printf("# Using mpi-io calls.\n"); - - - /* kindof a weird hack- if the location of the pvfstab file was - * specified on the command line, then spit out this location into - * the appropriate environment variable: */ - -#if H5_HAVE_SETENV -/* no setenv or unsetenv */ - if (opt_pvfstab_set) { - if((setenv("PVFSTAB_FILE", opt_pvfstab, 1)) < 0){ - perror("setenv"); - goto die_jar_jar_die; - } - } -#endif - - /* this is how much of the file data is covered on each iteration of - * the test. used to help determine the seek offset on each - * iteration */ - iter_jump = nprocs * opt_block; - - /* setup a buffer of data to write */ - if (!(tmp = (char *) malloc(opt_block + 256))) { - perror("malloc"); - goto die_jar_jar_die; - } - buf = tmp + 128 - (((long)tmp) % 128); /* align buffer */ - - if (opt_correct) { - /* do the same buffer setup for verifiable data */ - if (!(tmp2 = (char *) malloc(opt_block + 256))) { - perror("malloc2"); - goto die_jar_jar_die; - } - buf2 = tmp + 128 - (((long)tmp) % 128); - } - - /* open the file for writing */ - err = MPI_File_open(MPI_COMM_WORLD, opt_file, - MPI_MODE_CREATE | MPI_MODE_RDWR, MPI_INFO_NULL, &fh); - if (err < 0) { - fprintf(stderr, "node %d, open error: %s\n", mynod, strerror(errno)); - goto die_jar_jar_die; - } - - /* now repeat the write operations the number of times - * specified on the command line */ - for (j=0; j < opt_iter; j++) { - - /* calculate the appropriate position depending on the iteration - * and rank of the current process */ - seek_position = (j*iter_jump)+(mynod*opt_block); - - if (opt_correct) /* fill in buffer for iteration */ { - for (i=mynod+j, check=buf; i<opt_block; i++,check++) *check=(char)i; - } - - /* discover the starting time of the operation */ - MPI_Barrier(MPI_COMM_WORLD); - stim = MPI_Wtime(); - - /* write out the data */ - nchars = opt_block/sizeof(char); - err = MPI_File_write_at(fh, seek_position, buf, nchars, MPI_CHAR, &status); - if(err){ - fprintf(stderr, "node %d, write error: %s\n", mynod, - strerror(errno)); - } - - /* discover the ending time of the operation */ - etim = MPI_Wtime(); - - write_tim += (etim - stim); - - /* we are done with this "write" iteration */ - } - - err = MPI_File_close(&fh); - if(err){ - fprintf(stderr, "node %d, close error after write\n", mynod); - } - - /* wait for everyone to synchronize at this point */ - MPI_Barrier(MPI_COMM_WORLD); - - /* reopen the file to read the data back out */ - err = MPI_File_open(MPI_COMM_WORLD, opt_file, - MPI_MODE_CREATE | MPI_MODE_RDWR, MPI_INFO_NULL, &fh); - if (err < 0) { - fprintf(stderr, "node %d, open error: %s\n", mynod, strerror(errno)); - goto die_jar_jar_die; - } - - - /* we are going to repeat the read operation the number of iterations - * specified */ - for (j=0; j < opt_iter; j++) { - /* calculate the appropriate spot give the current iteration and - * rank within the MPI processes */ - seek_position = (j*iter_jump)+(mynod*opt_block); - - /* discover the start time */ - MPI_Barrier(MPI_COMM_WORLD); - stim = MPI_Wtime(); - - /* read in the file data */ - if (!opt_correct){ - err = MPI_File_read_at(fh, seek_position, buf, nchars, MPI_CHAR, &status); - } - else{ - err = MPI_File_read_at(fh, seek_position, buf2, nchars, MPI_CHAR, &status); - } - myerrno = errno; - - /* discover the end time */ - etim = MPI_Wtime(); - read_tim += (etim - stim); - - if (err < 0) fprintf(stderr, "node %d, read error, loc = %Ld: %s\n", - mynod, mynod*opt_block, strerror(myerrno)); - - /* if the user wanted to check correctness, compare the write - * buffer to the read buffer */ - if (opt_correct && memcmp(buf, buf2, opt_block)) { - fprintf(stderr, "node %d, correctness test failed\n", mynod); - my_correct = 0; - MPI_Allreduce(&my_correct, &correct, 1, MPI_INT, MPI_MIN, - MPI_COMM_WORLD); - } - - /* we are done with this read iteration */ - } - - /* close the file */ - err = MPI_File_close(&fh); - if(err){ - fprintf(stderr, "node %d, close error after write\n", mynod); - } - - /* compute the read and write times */ - MPI_Allreduce(&read_tim, &max_read_tim, 1, MPI_DOUBLE, MPI_MAX, - MPI_COMM_WORLD); - MPI_Allreduce(&read_tim, &min_read_tim, 1, MPI_DOUBLE, MPI_MIN, - MPI_COMM_WORLD); - MPI_Allreduce(&read_tim, &ave_read_tim, 1, MPI_DOUBLE, MPI_SUM, - MPI_COMM_WORLD); - - /* calculate the average from the sum */ - ave_read_tim = ave_read_tim / nprocs; - - MPI_Allreduce(&write_tim, &max_write_tim, 1, MPI_DOUBLE, MPI_MAX, - MPI_COMM_WORLD); - MPI_Allreduce(&write_tim, &min_write_tim, 1, MPI_DOUBLE, MPI_MIN, - MPI_COMM_WORLD); - MPI_Allreduce(&write_tim, &ave_write_tim, 1, MPI_DOUBLE, MPI_SUM, - MPI_COMM_WORLD); - - /* calculate the average from the sum */ - ave_write_tim = ave_write_tim / nprocs; - - /* print out the results on one node */ - if (mynod == 0) { - read_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_read_tim*1000000.0); - write_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_write_tim*1000000.0); - - printf("nr_procs = %d, nr_iter = %d, blk_sz = %ld\n", nprocs, - opt_iter, (long)opt_block); - - printf("# total_size = %ld\n", (long)(opt_block*nprocs*opt_iter)); - - printf("# Write: min_time = %f, max_time = %f, mean_time = %f\n", - min_write_tim, max_write_tim, ave_write_tim); - printf("# Read: min_time = %f, max_time = %f, mean_time = %f\n", - min_read_tim, max_read_tim, ave_read_tim); - - printf("Write bandwidth = %f Mbytes/sec\n", write_bw); - printf("Read bandwidth = %f Mbytes/sec\n", read_bw); - - if (opt_correct) { - printf("Correctness test %s.\n", correct ? "passed" : "failed"); - } - } - - -die_jar_jar_die: - -#if H5_HAVE_SETENV -/* no setenv or unsetenv */ - /* clear the environment variable if it was set earlier */ - if (opt_pvfstab_set){ - unsetenv("PVFSTAB_FILE"); - } -#endif - - free(tmp); - if (opt_correct) free(tmp2); - MPI_Finalize(); - return(0); -} - -int parse_args(int argc, char **argv) -{ - int c; - - while ((c = getopt(argc, argv, "s:b:i:f:p:c")) != EOF) { - switch (c) { - case 's': /* stripe */ - opt_stripe = atoi(optarg); - break; - case 'b': /* block size */ - opt_block = atoi(optarg); - break; - case 'i': /* iterations */ - opt_iter = atoi(optarg); - break; - case 'f': /* filename */ - strncpy(opt_file, optarg, 255); - break; - case 'p': /* pvfstab file */ - strncpy(opt_pvfstab, optarg, 255); - opt_pvfstab_set = 1; - break; - case 'c': /* correctness */ - opt_correct = 1; - break; - case '?': /* unknown */ - default: - break; - } - } - return(0); -} - -/* Wtime() - returns current time in sec., in a double */ -double Wtime() -{ - struct timeval t; - - gettimeofday(&t, NULL); - return((double)t.tv_sec + (double)t.tv_usec / 1000000); -} - -/* - * Local variables: - * c-indent-level: 3 - * c-basic-offset: 3 - * tab-width: 3 - * End: - */ - - - diff --git a/testpar/perf.c b/testpar/perf.c deleted file mode 100644 index 1b742a8..0000000 --- a/testpar/perf.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Author: Albert Cheng of NCSA, May 1, 2001. - * This is derived from code given to me by Robert Ross. - * - * NOTE: This code assumes that all command line arguments make it out to all - * the processes that make up the parallel job, which isn't always the case. - * So if it doesn't work on some platform, that might be why. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <unistd.h> -#include <errno.h> -#include <string.h> -#include <sys/time.h> -#include <mpi.h> -#ifndef MPI_FILE_NULL /*MPIO may be defined in mpi.h already */ -# include <mpio.h> -#endif - - -#include "hdf5.h" -/* Macro definitions */ -/* Verify: - * if val is false (0), print mesg and if fatal is true (non-zero), die. - */ -#define H5FATAL 1 -#define VRFY(val, mesg, fatal) do { \ - if (!val) { \ - printf("Proc %d: ", mynod); \ - printf("*** Assertion failed (%s) at line %4d in %s\n", \ - mesg, (int)__LINE__, __FILE__); \ - if (fatal){ \ - fflush(stdout); \ - goto die_jar_jar_die; \ - } \ - } \ -} while(0) -#define RANK 1 -hsize_t dims[RANK]; /* dataset dim sizes */ -hsize_t block[RANK], stride[RANK], count[RANK]; -hssize_t start[RANK]; -hid_t fid; /* HDF5 file ID */ -hid_t acc_tpl; /* File access templates */ -hid_t sid; /* Dataspace ID */ -hid_t file_dataspace; /* File dataspace ID */ -hid_t mem_dataspace; /* memory dataspace ID */ -hid_t dataset; /* Dataset ID */ -hsize_t opt_alignment = 1; -hsize_t opt_threshold = 1; - - -/* DEFAULT VALUES FOR OPTIONS */ -int64_t opt_block = 1048576*16; -int opt_iter = 1; -int opt_stripe = -1; -int opt_correct = 0; -int amode = O_RDWR | O_CREAT; -char opt_file[256] = "/foo/test.out\0"; -char opt_pvfstab[256] = "notset\0"; -int opt_pvfstab_set = 0; - -/* function prototypes */ -int parse_args(int argc, char **argv); -double Wtime(void); - -extern int errno; -extern int debug_on; - -/* globals needed for getopt */ -extern char *optarg; -extern int optind, opterr; - -int main(int argc, char **argv) -{ - char *buf, *tmp, *buf2, *tmp2, *check; - int i, j, mynod=0, nprocs=1, err, my_correct = 1, correct, myerrno; - double stim, etim; - double write_tim = 0; - double read_tim = 0; - double read_bw, write_bw; - double max_read_tim, max_write_tim; - double min_read_tim, min_write_tim; - double ave_read_tim, ave_write_tim; - int64_t iter_jump = 0; - int64_t seek_position = 0; - MPI_File fh; - MPI_Status status; - int nchars; - herr_t ret; /* Generic return value */ - - /* startup MPI and determine the rank of this process */ - MPI_Init(&argc,&argv); - MPI_Comm_size(MPI_COMM_WORLD, &nprocs); - MPI_Comm_rank(MPI_COMM_WORLD, &mynod); - - /* parse the command line arguments */ - parse_args(argc, argv); - - if (mynod == 0) printf("# Using hdf5-io calls.\n"); - - - /* kindof a weird hack- if the location of the pvfstab file was - * specified on the command line, then spit out this location into - * the appropriate environment variable: */ - -#if H5_HAVE_SETENV -/* no setenv or unsetenv */ - if (opt_pvfstab_set) { - if((setenv("PVFSTAB_FILE", opt_pvfstab, 1)) < 0){ - perror("setenv"); - goto die_jar_jar_die; - } - } -#endif - - /* this is how much of the file data is covered on each iteration of - * the test. used to help determine the seek offset on each - * iteration */ - iter_jump = nprocs * opt_block; - - /* setup a buffer of data to write */ - if (!(tmp = (char *) malloc(opt_block + 256))) { - perror("malloc"); - goto die_jar_jar_die; - } - buf = tmp + 128 - (((long)tmp) % 128); /* align buffer */ - - if (opt_correct) { - /* do the same buffer setup for verifiable data */ - if (!(tmp2 = (char *) malloc(opt_block + 256))) { - perror("malloc2"); - goto die_jar_jar_die; - } - buf2 = tmp + 128 - (((long)tmp) % 128); - } - - /* setup file access template with parallel IO access. */ - acc_tpl = H5Pcreate (H5P_FILE_ACCESS); - VRFY((acc_tpl >= 0), "H5Pcreate access succeeded", H5FATAL); - ret = H5Pset_fapl_mpio(acc_tpl, MPI_COMM_WORLD, MPI_INFO_NULL); - VRFY((ret >= 0), "H5Pset_fapl_mpio succeeded", H5FATAL); - /* set optional allocation alignment */ - if (opt_alignment*opt_threshold != 1){ - ret = H5Pset_alignment(acc_tpl, opt_threshold, opt_alignment ); - VRFY((ret >= 0), "H5Pset_alignment succeeded", !H5FATAL); - } - - /* create the parallel file */ - fid=H5Fcreate(opt_file,H5F_ACC_TRUNC,H5P_DEFAULT,acc_tpl); - VRFY((fid >= 0), "H5Fcreate succeeded", H5FATAL); - - /* define a contiquous dataset of opt_iter*nprocs*opt_block chars */ - dims[0] = opt_iter*nprocs*opt_block; - sid = H5Screate_simple (RANK, dims, NULL); - VRFY((sid >= 0), "H5Screate_simple succeeded", H5FATAL); - dataset = H5Dcreate(fid, "Dataset1", H5T_NATIVE_CHAR, sid, - H5P_DEFAULT); - VRFY((dataset >= 0), "H5Dcreate succeeded", H5FATAL); - - /* create the memory dataspace and the file dataspace */ - dims[0] = opt_block; - mem_dataspace = H5Screate_simple (RANK, dims, NULL); - VRFY((mem_dataspace >= 0), "", H5FATAL); - file_dataspace = H5Dget_space (dataset); - VRFY((file_dataspace >= 0), "H5Dget_space succeeded", H5FATAL); - - /* now each process writes a block of opt_block chars in round robbin - * fashion until the whole dataset is covered. - */ - for (j=0; j < opt_iter; j++) { - /* setup a file dataspace selection */ - start[0] = (j*iter_jump)+(mynod*opt_block); - stride[0] = block[0] = opt_block; - count[0]= 1; - ret=H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block); - VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL); - - if (opt_correct) /* fill in buffer for iteration */ { - for (i=mynod+j, check=buf; i<opt_block; i++,check++) *check=(char)i; - } - - /* discover the starting time of the operation */ - MPI_Barrier(MPI_COMM_WORLD); - stim = MPI_Wtime(); - - /* write data */ - ret = H5Dwrite(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, - H5P_DEFAULT, buf); - VRFY((ret >= 0), "H5Dwrite dataset1 succeeded", !H5FATAL); - - /* discover the ending time of the operation */ - etim = MPI_Wtime(); - - write_tim += (etim - stim); - - /* we are done with this "write" iteration */ - } - - /* close dataset and file */ - ret=H5Dclose(dataset); - VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL); - ret=H5Fclose(fid); - VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL); - - - - /* wait for everyone to synchronize at this point */ - MPI_Barrier(MPI_COMM_WORLD); - - /* reopen the file for reading */ - fid=H5Fopen(opt_file,H5F_ACC_RDONLY,acc_tpl); - VRFY((fid >= 0), "", H5FATAL); - - /* open the dataset */ - dataset = H5Dopen(fid, "Dataset1"); - VRFY((dataset >= 0), "H5Dopen succeeded", H5FATAL); - - /* we can re-use the same mem_dataspace and file_dataspace - * the H5Dwrite used since the dimension size is the same. - */ - - /* we are going to repeat the read the same pattern the write used */ - for (j=0; j < opt_iter; j++) { - /* setup a file dataspace selection */ - start[0] = (j*iter_jump)+(mynod*opt_block); - stride[0] = block[0] = opt_block; - count[0]= 1; - ret=H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block); - VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL); - /* seek to the appropriate spot give the current iteration and - * rank within the MPI processes */ - - /* discover the start time */ - MPI_Barrier(MPI_COMM_WORLD); - stim = MPI_Wtime(); - - /* read data */ - /* read in the file data */ - if (!opt_correct){ - ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, - H5P_DEFAULT, buf); - } - else{ - ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, - H5P_DEFAULT, buf2); - } - myerrno = errno; - /* discover the end time */ - etim = MPI_Wtime(); - read_tim += (etim - stim); - VRFY((ret >= 0), "H5Dwrite dataset1 succeeded", !H5FATAL); - - - if (ret < 0) fprintf(stderr, "node %d, read error, loc = %Ld: %s\n", - mynod, mynod*opt_block, strerror(myerrno)); - - /* if the user wanted to check correctness, compare the write - * buffer to the read buffer */ - if (opt_correct && memcmp(buf, buf2, opt_block)) { - fprintf(stderr, "node %d, correctness test failed\n", mynod); - my_correct = 0; - MPI_Allreduce(&my_correct, &correct, 1, MPI_INT, MPI_MIN, - MPI_COMM_WORLD); - } - - /* we are done with this read iteration */ - } - - /* close dataset and file */ - ret=H5Dclose(dataset); - VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL); - ret=H5Fclose(fid); - VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL); - - /* compute the read and write times */ - MPI_Allreduce(&read_tim, &max_read_tim, 1, MPI_DOUBLE, MPI_MAX, - MPI_COMM_WORLD); - MPI_Allreduce(&read_tim, &min_read_tim, 1, MPI_DOUBLE, MPI_MIN, - MPI_COMM_WORLD); - MPI_Allreduce(&read_tim, &ave_read_tim, 1, MPI_DOUBLE, MPI_SUM, - MPI_COMM_WORLD); - - /* calculate the average from the sum */ - ave_read_tim = ave_read_tim / nprocs; - - MPI_Allreduce(&write_tim, &max_write_tim, 1, MPI_DOUBLE, MPI_MAX, - MPI_COMM_WORLD); - MPI_Allreduce(&write_tim, &min_write_tim, 1, MPI_DOUBLE, MPI_MIN, - MPI_COMM_WORLD); - MPI_Allreduce(&write_tim, &ave_write_tim, 1, MPI_DOUBLE, MPI_SUM, - MPI_COMM_WORLD); - - /* calculate the average from the sum */ - ave_write_tim = ave_write_tim / nprocs; - - /* print out the results on one node */ - if (mynod == 0) { - read_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_read_tim*1000000.0); - write_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_write_tim*1000000.0); - - printf("nr_procs = %d, nr_iter = %d, blk_sz = %ld\n", nprocs, - opt_iter, (long)opt_block); - - printf("# total_size = %ld\n", (long)(opt_block*nprocs*opt_iter)); - - printf("# Write: min_time = %f, max_time = %f, mean_time = %f\n", - min_write_tim, max_write_tim, ave_write_tim); - printf("# Read: min_time = %f, max_time = %f, mean_time = %f\n", - min_read_tim, max_read_tim, ave_read_tim); - - printf("Write bandwidth = %f Mbytes/sec\n", write_bw); - printf("Read bandwidth = %f Mbytes/sec\n", read_bw); - - if (opt_correct) { - printf("Correctness test %s.\n", correct ? "passed" : "failed"); - } - } - - -die_jar_jar_die: - -#if H5_HAVE_SETENV -/* no setenv or unsetenv */ - /* clear the environment variable if it was set earlier */ - if (opt_pvfstab_set){ - unsetenv("PVFSTAB_FILE"); - } -#endif - - free(tmp); - if (opt_correct) free(tmp2); - MPI_Finalize(); - return(0); -} - -int parse_args(int argc, char **argv) -{ - int c; - - while ((c = getopt(argc, argv, "s:b:i:f:p:a:c")) != EOF) { - switch (c) { - case 's': /* stripe */ - opt_stripe = atoi(optarg); - break; - case 'b': /* block size */ - opt_block = atoi(optarg); - break; - case 'i': /* iterations */ - opt_iter = atoi(optarg); - break; - case 'f': /* filename */ - strncpy(opt_file, optarg, 255); - break; - case 'p': /* pvfstab file */ - strncpy(opt_pvfstab, optarg, 255); - opt_pvfstab_set = 1; - break; - case 'a': /* aligned allocation. - * syntax: -a<alignment>/<threshold> - * e.g., -a4096/512 allocate at 4096 bytes - * boundary if request size >= 512. - */ - {char *p; - opt_alignment = atoi(optarg); - if (p=(char*)strchr(optarg, '/')) - opt_threshold = atoi(p+1); - } - HDfprintf(stdout, - "alignment/threshold=%Hu/%Hu\n", - opt_alignment, opt_threshold); - break; - case 'c': /* correctness */ - opt_correct = 1; - break; - case '?': /* unknown */ - default: - break; - } - } - return(0); -} - -/* Wtime() - returns current time in sec., in a double */ -double Wtime() -{ - struct timeval t; - - gettimeofday(&t, NULL); - return((double)t.tv_sec + (double)t.tv_usec / 1000000); -} - -/* - * Local variables: - * c-indent-level: 3 - * c-basic-offset: 3 - * tab-width: 3 - * End: - */ - - - |