summaryrefslogtreecommitdiffstats
path: root/testpar
diff options
context:
space:
mode:
Diffstat (limited to 'testpar')
-rw-r--r--testpar/t_dset.c549
-rw-r--r--testpar/testphdf5.c3
-rw-r--r--testpar/testphdf5.h16
3 files changed, 567 insertions, 1 deletions
diff --git a/testpar/t_dset.c b/testpar/t_dset.c
index 21e25b6..d2f061d 100644
--- a/testpar/t_dset.c
+++ b/testpar/t_dset.c
@@ -2498,3 +2498,552 @@ none_selection_chunk(void)
if(data_origin) free(data_origin);
if(data_array) free(data_array);
}
+
+
+/* Function: test_actual_io_mode
+ *
+ * Purpose: tests one specific case of collective I/O and checks that the
+ * actual_chunk_opt_mode property and the actual_io_mode
+ * properties in the DXPL have the correct values.
+ *
+ * Input: selection_mode: changes the way processes select data from the space, as well
+ * as some dxpl flags to get collective I/O to break in different ways.
+ *
+ * The relevant I/O function and expected response for each mode:
+ * TEST_ACTUAL_IO_MULTI_CHUNK_IND:
+ * H5D_mpi_chunk_collective_io, each process reports independent I/O
+ *
+ * TEST_ACTUAL_IO_MULTI_CHUNK_COL:
+ * H5D_mpi_chunk_collective_io, each process reports collective I/O
+ *
+ * TEST_ACTUAL_IO_MULTI_CHUNK_MIX:
+ * H5D_mpi_chunk_collective_io, each process reports mixed I/O
+ *
+ * TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE:
+ * H5D_mpi_chunk_collective_io, processes disagree. The root reports
+ * collective, the rest report independent I/O
+ *
+ * TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_COL:
+ * H5D_mpi_chunk_collective_io_no_opt, each process reports collective I/O
+ *
+ * TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE:
+ * H5D_mpi_chunk_collective_io_no_opt, processes disagree
+ * (collective and mixed I/O)
+ *
+ * TEST_ACTUAL_IO_LINK_CHUNK:
+ * H5D_link_chunk_collective_io, processes report linked chunk I/O
+ *
+ * TEST_ACTUAL_IO_CONTIGUOUS:
+ * H5D_contig_collective_write or H5D_contig_collective_read
+ * each process reports contiguous collective I/O
+ *
+ * TEST_ACTUAL_IO_NO_COLLECTIVE:
+ * Simple independent I/O. This tests that the defaults are properly set.
+ *
+ * TEST_ACTUAL_IO_RESET:
+ * Perfroms collective and then independent I/O wit hthe same dxpl to
+ * make sure the peroperty is correctly reset to the default on each use.
+ * Specifically, this test runs TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE
+ * (The most complex case that works on all builds) and then performs
+ * an independent read and write with the same dxpls.
+ *
+ * It may seem like TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_IND and
+ * TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX have been accidentally
+ * left out. This is intentional; the other test cases sufficiently
+ * cover all cases for Multi Chunk No Opt I/O.
+ *
+ * Programmer: Jacob Gruber
+ * Date: 2011-04-06
+ */
+static void
+test_actual_io_mode(int selection_mode) {
+ H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_write = -1;
+ H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_read = -1;
+ H5D_mpio_actual_chunk_opt_mode_t actual_chunk_opt_mode_expected = -1;
+ H5D_mpio_actual_io_mode_t actual_io_mode_write = -1;
+ H5D_mpio_actual_io_mode_t actual_io_mode_read = -1;
+ H5D_mpio_actual_io_mode_t actual_io_mode_expected = -1;
+ const char * filename;
+ const char * test_name;
+ hbool_t multi_chunk_no_opt;
+ hbool_t multi_chunk_with_opt;
+ hbool_t is_chunked;
+ hbool_t is_collective;
+ int mpi_size = -1;
+ int mpi_rank = -1;
+ int length;
+ int * buffer;
+ int i;
+ MPI_Comm mpi_comm = MPI_COMM_NULL;
+ MPI_Info mpi_info = MPI_INFO_NULL;
+ hid_t fid = -1;
+ hid_t sid = -1;
+ hid_t dataset = -1;
+ hid_t data_type = H5T_NATIVE_INT;
+ hid_t fapl = -1;
+ hid_t mem_space = -1;
+ hid_t file_space = -1;
+ hid_t dcpl = -1;
+ hid_t dxpl_write = -1;
+ hid_t dxpl_read = -1;
+ hsize_t dims[RANK];
+ hsize_t chunk_dims[RANK];
+ hsize_t start[RANK];
+ hsize_t stride[RANK];
+ hsize_t count[RANK];
+ hsize_t block[RANK];
+ hbool_t use_gpfs = FALSE;
+ herr_t ret;
+
+ /* Set up some flags to make some future if statements slightly more readable */
+ multi_chunk_no_opt = (
+ selection_mode == TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_IND ||
+ selection_mode == TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_COL ||
+ selection_mode == TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE );
+
+ /* Note: RESET performs the same tests as MULTI_CHUNK_MIX_DISAGREE and then
+ * tests independent I/O
+ */
+ multi_chunk_with_opt = (
+ selection_mode == TEST_ACTUAL_IO_MULTI_CHUNK_IND ||
+ selection_mode == TEST_ACTUAL_IO_MULTI_CHUNK_COL ||
+ selection_mode == TEST_ACTUAL_IO_MULTI_CHUNK_MIX ||
+ selection_mode == TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE ||
+ selection_mode == TEST_ACTUAL_IO_RESET );
+
+ is_chunked = (
+ selection_mode != TEST_ACTUAL_IO_CONTIGUOUS &&
+ selection_mode != TEST_ACTUAL_IO_NO_COLLECTIVE);
+
+ is_collective = selection_mode != TEST_ACTUAL_IO_NO_COLLECTIVE;
+
+ /* Set up MPI parameters */
+ MPI_Comm_size(MPI_COMM_WORLD, &mpi_size);
+ MPI_Comm_rank(MPI_COMM_WORLD, &mpi_rank);
+
+ MPI_Barrier(MPI_COMM_WORLD);
+
+ HDassert(mpi_size >= 1);
+
+ mpi_comm = MPI_COMM_WORLD;
+ mpi_info = MPI_INFO_NULL;
+
+ filename = (const char *)GetTestParameters();
+ HDassert(filename != NULL);
+
+ /* Setup the file access template */
+ fapl = create_faccess_plist(mpi_comm, mpi_info, facc_type, use_gpfs);
+ VRFY((fapl >= 0), "create_faccess_plist() succeeded");
+
+ /* Create the file */
+ fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
+ VRFY((fid >= 0), "H5Fcreate succeeded");
+
+ /* Create the basic Space */
+ dims[0] = dim0;
+ dims[1] = dim1;
+ sid = H5Screate_simple (RANK, dims, NULL);
+ VRFY((sid >= 0), "H5Screate_simple succeeded");
+
+ /* Create the dataset creation plist */
+ dcpl = H5Pcreate(H5P_DATASET_CREATE);
+ VRFY((dcpl >= 0), "dataset creation plist created successfully");
+
+ /* If we are not testing contiguous datasets */
+ if(is_chunked) {
+ /* Set up chunk information. */
+ chunk_dims[0] = dims[0]/mpi_size;
+ chunk_dims[1] = dims[1];
+ ret = H5Pset_chunk(dcpl, 2, chunk_dims);
+ VRFY((ret >= 0),"chunk creation property list succeeded");
+ }
+
+ /* Create the dataset */
+ dataset = H5Dcreate2(fid, "actual_io", data_type, sid, H5P_DEFAULT,
+ dcpl, H5P_DEFAULT);
+ VRFY((dataset >= 0), "H5Dcreate2() dataset succeeded");
+
+ /* Create the file dataspace */
+ file_space = H5Dget_space(dataset);
+ VRFY((file_space >= 0), "H5Dget_space succeeded");
+
+ /* Choose a selection method based on the type of I/O we want to occur,
+ * and also set up some selection-dependeent test info. */
+ switch(selection_mode) {
+
+ /* Independent I/O with optimization */
+ case TEST_ACTUAL_IO_MULTI_CHUNK_IND:
+ /* Since the dataset is chunked by row and each process selects a row,
+ * each process writes to a different chunk. This forces all I/O to be
+ * independent.
+ */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYROW);
+
+ test_name = "Multi Chunk - Independent";
+ actual_chunk_opt_mode_expected = H5D_MPIO_MULTI_CHUNK;
+ actual_io_mode_expected = H5D_MPIO_CHUNK_INDEPENDENT;
+ break;
+
+ /* Collective I/O with optimization */
+ case TEST_ACTUAL_IO_MULTI_CHUNK_COL:
+ /* The dataset is chunked by rows, so each process takes a column which
+ * spans all chunks. Since the processes write non-overlapping regular
+ * selections to each chunk, the operation is purely collective.
+ */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYCOL);
+
+ test_name = "Multi Chunk - Collective";
+ actual_chunk_opt_mode_expected = H5D_MPIO_MULTI_CHUNK;
+ actual_io_mode_expected = H5D_MPIO_CHUNK_COLLECTIVE;
+ break;
+
+ /* Mixed I/O with optimization */
+ case TEST_ACTUAL_IO_MULTI_CHUNK_MIX:
+ /* A chunk will be assigned collective I/O only if it is selected by each
+ * process. To get mixed I/O, have the root select all chunks and each
+ * subsequent process select the first and nth chunk. The first chunk,
+ * accessed by all, will be assigned collective I/O while each other chunk
+ * will be accessed only by the root and the nth procecess and will be
+ * assigned independent I/O. Each process will access one chunk collectively
+ * and at least one chunk independently, reporting mixed I/O.
+ */
+
+ if(mpi_rank == 0) {
+ /* Select the first column */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYCOL);
+ } else {
+ /* Select the first and the nth chunk in the nth column */
+ block[0] = dim0 / mpi_size;
+ block[1] = dim1 / mpi_size;
+ count[0] = 2;
+ count[1] = 1;
+ stride[0] = mpi_rank * block[0];
+ stride[1] = 1;
+ start[0] = 0;
+ start[1] = mpi_rank*block[1];
+ }
+
+ test_name = "Multi Chunk - Mixed";
+ actual_chunk_opt_mode_expected = H5D_MPIO_MULTI_CHUNK;
+ actual_io_mode_expected = H5D_MPIO_CHUNK_MIXED;
+ break;
+
+ /* RESET tests that the properties are properly reset to defaults each time I/O is
+ * performed. To acheive this, we have RESET perform collective I/O (which would change
+ * the values from the defaults) followed by independent I/O (which should report the
+ * default values). RESET doesn't need to have a unique selection, so we reuse
+ * MULTI_CHUMK_MIX_DISAGREE, which was chosen because it is a complex case that works
+ * on all builds. The independent section of RESET can be found at the end of this function.
+ */
+ case TEST_ACTUAL_IO_RESET:
+
+ /* Mixed I/O with optimization and internal disagreement */
+ case TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE:
+ /* A chunk will be assigned collective I/O only if it is selected by each
+ * process. To get mixed I/O with disagreement, assign process n to the
+ * first chunk and the nth chunk. The first chunk, selected by all, is
+ * assgigned collective I/O, while each other process gets independent I/O.
+ * Since the root process with only access the first chunk, it will report
+ * collective I/O. The subsequent processes will access the first chunk
+ * collectively, and their other chunk indpendently, reporting mixed I/O.
+ */
+
+ if(mpi_rank == 0) {
+ /* Select the first chunk in the first column */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYCOL);
+ block[0] = block[0] / mpi_size;
+ } else {
+ /* Select the first and the nth chunk in the nth column */
+ block[0] = dim0 / mpi_size;
+ block[1] = dim1 / mpi_size;
+ count[0] = 2;
+ count[1] = 1;
+ stride[0] = mpi_rank * block[0];
+ stride[1] = 1;
+ start[0] = 0;
+ start[1] = mpi_rank*block[1];
+ }
+
+ /* If the testname was not already set by the RESET case */
+ if (selection_mode == TEST_ACTUAL_IO_RESET)
+ test_name = "RESET";
+ else
+ test_name = "Multi Chunk - Mixed (Disagreement)";
+
+ actual_chunk_opt_mode_expected = H5D_MPIO_MULTI_CHUNK;
+
+ if(mpi_rank == 0)
+ actual_io_mode_expected = H5D_MPIO_CHUNK_COLLECTIVE;
+ else
+ actual_io_mode_expected = H5D_MPIO_CHUNK_MIXED;
+
+ break;
+
+ /* Collective I/O without optimization */
+ case TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_COL:
+ /* The dataset is chunked by rows, so when each process takes a column, its
+ * selection spans all chunks. Since no process writes more chunks than any
+ * other, colective I/O is never broken. */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYCOL);
+
+ test_name = "Multi Chunk No Opt - Collective";
+ actual_chunk_opt_mode_expected = H5D_MPIO_MULTI_CHUNK_NO_OPT;
+ actual_io_mode_expected = H5D_MPIO_CHUNK_COLLECTIVE;
+ break;
+
+
+ /* Mixed I/O without optimization with disagreement */
+ case TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE:
+ /* Each process takes a column, but the root's column is shortened so that
+ * it only reads the first chunk. Since all the other processes are writing
+ * to more chunks, they will break collective after the first chunk.
+ */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYCOL);
+ if(mpi_rank == 0)
+ block[0] = block[0] / mpi_size;
+
+ test_name = "Multi Chunk No Opt - Mixed (Disagreement)";
+ actual_chunk_opt_mode_expected = H5D_MPIO_MULTI_CHUNK_NO_OPT;
+
+ if(mpi_rank == 0)
+ actual_io_mode_expected = H5D_MPIO_CHUNK_COLLECTIVE;
+ else
+ actual_io_mode_expected = H5D_MPIO_CHUNK_MIXED;
+
+ break;
+
+ /* Linked Chunk I/O */
+ case TEST_ACTUAL_IO_LINK_CHUNK:
+ /* Nothing special; link chunk I/O is forced in the dxpl settings. */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYROW);
+
+ test_name = "Link Chunk";
+ actual_chunk_opt_mode_expected = H5D_MPIO_LINK_CHUNK;
+ actual_io_mode_expected = H5D_MPIO_CHUNK_COLLECTIVE;
+ break;
+
+ /* Contiguous Dataset */
+ case TEST_ACTUAL_IO_CONTIGUOUS:
+ /* A non overlapping, regular selection in a contiguous dataset leads to
+ * collective I/O */
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYROW);
+
+ test_name = "Contiguous";
+ actual_chunk_opt_mode_expected = H5D_MPIO_NO_CHUNK_OPTIMIZATION;
+ actual_io_mode_expected = H5D_MPIO_CONTIGUOUS_COLLECTIVE;
+ break;
+
+ case TEST_ACTUAL_IO_NO_COLLECTIVE:
+ slab_set(mpi_rank, mpi_size, start, count, stride, block, BYROW);
+
+ test_name = "Independent";
+ actual_chunk_opt_mode_expected = H5D_MPIO_NO_CHUNK_OPTIMIZATION;
+ actual_io_mode_expected = H5D_MPIO_NO_COLLECTIVE;
+ break;
+
+ default:
+ test_name = "Undefined Selection Mode";
+ actual_chunk_opt_mode_expected = -1;
+ actual_io_mode_expected = -1;
+ break;
+ }
+
+ /* Reset the expected values to defulats if the MPI_POSIX driver is in use.
+ * This property is defined only for mpio, not MPI POSIX. */
+ if (facc_type == FACC_MPIPOSIX) {
+ actual_chunk_opt_mode_expected = H5D_MPIO_NO_CHUNK_OPTIMIZATION;
+ actual_io_mode_expected = H5D_MPIO_NO_COLLECTIVE;
+ }
+
+ ret = H5Sselect_hyperslab(file_space, H5S_SELECT_SET, start, stride, count, block);
+ VRFY((ret >= 0), "H5Sset_hyperslab succeeded");
+
+ /* Create a memory dataspace mirroring the dataset and select the same hyperslab
+ * as in the file space.
+ */
+ mem_space = H5Screate_simple (RANK, dims, NULL);
+ VRFY((mem_space >= 0), "mem_space created");
+
+ ret = H5Sselect_hyperslab(mem_space, H5S_SELECT_SET, start, stride, count, block);
+ VRFY((ret >= 0), "H5Sset_hyperslab succeeded");
+
+
+ /* Get the number of elements in the selection */
+ length = dim0 * dim1;
+
+ /* Allocate and initialize the buffer */
+ buffer = (int *)HDmalloc(sizeof(int) * length);
+ VRFY((buffer != NULL), "malloc of buffer succeeded");
+ for(i = 0; i < length; i++)
+ buffer[i] = i;
+
+ /* Set up the dxpl for the write */
+ dxpl_write = H5Pcreate(H5P_DATASET_XFER);
+ VRFY((dxpl_write >= 0), "H5Pcreate(H5P_DATASET_XFER) succeeded");
+
+ /* Set collective I/O properties in the dxpl. */
+ if(is_collective) {
+ /* Request collective I/O */
+ ret = H5Pset_dxpl_mpio(dxpl_write, H5FD_MPIO_COLLECTIVE);
+ VRFY((ret >= 0), "H5Pset_dxpl_mpio succeeded");
+
+ /* Set the threshold number of processes per chunk for link chunk I/O
+ * to twice mpi_size. This will prevent the threshold from ever being
+ * met, thus forcing multi chunk io instead of link chunk io.
+ */
+ if(multi_chunk_with_opt) {
+ ret = H5Pset_dxpl_mpio_chunk_opt_num(dxpl_write, (unsigned) mpi_size*2);
+ VRFY((ret >= 0), "H5Pset_dxpl_mpio_chunk_opt_num succeeded");
+
+ ret = H5Pset_dxpl_mpio_chunk_opt_ratio(dxpl_write, (unsigned) 99);
+ VRFY((ret >= 0), "H5Pset_dxpl_mpio_chunk_opt_ratio succeeded");
+ }
+
+ /* Request multi chunk I/O without optimization */
+ if(multi_chunk_no_opt) {
+ ret = H5Pset_dxpl_mpio_chunk_opt(dxpl_write, H5FD_MPIO_CHUNK_MULTI_IO);
+ VRFY((ret >= 0), "H5Pset_dxpl_mpio succeeded");
+ }
+ }
+
+ /* Make a copy of the dxpl to test the read operation */
+ dxpl_read = H5Pcopy(dxpl_write);
+ VRFY((dxpl_read >= 0), "H5Pcopy succeeded");
+
+ /* Write */
+ ret = H5Dwrite(dataset, data_type, mem_space, file_space, dxpl_write, buffer);
+ if(ret < 0) H5Eprint2(H5E_DEFAULT, stdout);
+ VRFY((ret >= 0), "H5Dwrite() dataset multichunk write succeeded");
+
+ /* Retreive Actual io valuess */
+ ret = H5Pget_mpio_actual_io_mode(dxpl_write, &actual_io_mode_write);
+ VRFY((ret >= 0), "retriving actual io mode suceeded" );
+
+ ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_write, &actual_chunk_opt_mode_write);
+ VRFY((ret >= 0), "retriving actual chunk opt mode succeeded" );
+
+ /* Read */
+ ret = H5Dread(dataset, data_type, mem_space, file_space, dxpl_read, buffer);
+ if(ret < 0) H5Eprint2(H5E_DEFAULT, stdout);
+ VRFY((ret >= 0), "H5Dread() dataset multichunk read succeeded");
+
+ /* Retreive Actual io values */
+ ret = H5Pget_mpio_actual_io_mode(dxpl_read, &actual_io_mode_read);
+ VRFY((ret >= 0), "retriving actual io mode succeeded" );
+
+ ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_read, &actual_chunk_opt_mode_read);
+ VRFY((ret >= 0), "retriving actual chunk opt mode succeeded" );
+
+ /* Check write vs read */
+ VRFY((actual_io_mode_read == actual_io_mode_write),
+ "reading and writing are the same for actual_io_mode");
+ VRFY((actual_chunk_opt_mode_read == actual_chunk_opt_mode_write),
+ "reading and writing are the same for actual_chunk_opt_mode");
+
+
+ /* Test values */
+ if(actual_chunk_opt_mode_expected != (unsigned) -1 && actual_io_mode_expected != (unsigned) -1) {
+ char message[100];
+ sprintf(message, "Actual Chunk Opt Mode has the correct value for %s.\n",test_name);
+ VRFY((actual_chunk_opt_mode_write == actual_chunk_opt_mode_expected), message);
+ sprintf(message, "Actual IO Mode has the correct value for %s.\n",test_name);
+ VRFY((actual_io_mode_write == actual_io_mode_expected), message);
+ } else {
+ HDfprintf(stderr, "%s %d -> (%d,%d)\n", test_name, mpi_rank,
+ actual_chunk_opt_mode_write, actual_io_mode_write);
+ }
+
+ /* To test that the property is succesfully reset to the default, we perform some
+ * independent I/O after the collective I/O
+ */
+ if (selection_mode == TEST_ACTUAL_IO_RESET) {
+ if (mpi_rank == 0) {
+ /* Switch to independent io */
+ ret = H5Pset_dxpl_mpio(dxpl_write, H5FD_MPIO_INDEPENDENT);
+ VRFY((ret >= 0), "H5Pset_dxpl_mpio succeeded");
+ ret = H5Pset_dxpl_mpio(dxpl_read, H5FD_MPIO_INDEPENDENT);
+ VRFY((ret >= 0), "H5Pset_dxpl_mpio succeeded");
+
+ /* Write */
+ ret = H5Dwrite(dataset, data_type, H5S_ALL, H5S_ALL, dxpl_write, buffer);
+ VRFY((ret >= 0), "H5Dwrite() dataset multichunk write succeeded");
+
+ /* Check Properties */
+ ret = H5Pget_mpio_actual_io_mode(dxpl_write, &actual_io_mode_write);
+ VRFY( (ret >= 0), "retriving actual io mode succeeded" );
+ ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_write, &actual_chunk_opt_mode_write);
+ VRFY( (ret >= 0), "retriving actual chunk opt mode succeeded" );
+
+ VRFY(actual_chunk_opt_mode_write == H5D_MPIO_NO_CHUNK_OPTIMIZATION,
+ "actual_chunk_opt_mode has correct value for reset write (independent)");
+ VRFY(actual_io_mode_write == H5D_MPIO_NO_COLLECTIVE,
+ "actual_io_mode has correct value for reset write (independent)");
+
+ /* Read */
+ ret = H5Dread(dataset, data_type, H5S_ALL, H5S_ALL, dxpl_read, buffer);
+ VRFY((ret >= 0), "H5Dwrite() dataset multichunk write succeeded");
+
+ /* Check Properties */
+ ret = H5Pget_mpio_actual_io_mode(dxpl_read, &actual_io_mode_read);
+ VRFY( (ret >= 0), "retriving actual io mode succeeded" );
+ ret = H5Pget_mpio_actual_chunk_opt_mode(dxpl_read, &actual_chunk_opt_mode_read);
+ VRFY( (ret >= 0), "retriving actual chunk opt mode succeeded" );
+
+ VRFY(actual_chunk_opt_mode_read == H5D_MPIO_NO_CHUNK_OPTIMIZATION,
+ "actual_chunk_opt_mode has correct value for reset read (independent)");
+ VRFY(actual_io_mode_read == H5D_MPIO_NO_COLLECTIVE,
+ "actual_io_mode has correct value for reset read (independent)");
+ }
+ }
+
+ /* Release some resources */
+ ret = H5Sclose(sid);
+ ret = H5Pclose(fapl);
+ ret = H5Pclose(dcpl);
+ ret = H5Pclose(dxpl_write);
+ ret = H5Pclose(dxpl_read);
+ ret = H5Dclose(dataset);
+ ret = H5Sclose(mem_space);
+ ret = H5Sclose(file_space);
+ ret = H5Fclose(fid);
+ HDfree(buffer);
+ return;
+}
+
+
+/* Function: actual_io_mode_tests
+ *
+ * Purpose: Tests all possible cases of the actual_io_mode property.
+ *
+ * Programmer: Jacob Gruber
+ * Date: 2011-04-06
+ */
+void
+actual_io_mode_tests(void) {
+ int mpi_size = -1;
+ int mpi_rank = -1;
+ MPI_Comm_size(MPI_COMM_WORLD, &mpi_size);
+ MPI_Comm_size(MPI_COMM_WORLD, &mpi_rank);
+
+ test_actual_io_mode(TEST_ACTUAL_IO_NO_COLLECTIVE);
+
+ test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_IND);
+ test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_COL);
+
+ /* The Multi Chunk Mixed test requires atleast three processes. */
+ if (mpi_size > 2)
+ test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX);
+ else
+ HDfprintf(stdout, "Multi Chunk Mixed test requires 3 proceses minimum\n");
+
+ test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE);
+
+ test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_COL);
+ test_actual_io_mode(TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE);
+
+ test_actual_io_mode(TEST_ACTUAL_IO_LINK_CHUNK);
+ test_actual_io_mode(TEST_ACTUAL_IO_CONTIGUOUS);
+
+ test_actual_io_mode(TEST_ACTUAL_IO_RESET);
+ return;
+}
diff --git a/testpar/testphdf5.c b/testpar/testphdf5.c
index 07568d4..e3c72ef 100644
--- a/testpar/testphdf5.c
+++ b/testpar/testphdf5.c
@@ -498,6 +498,9 @@ int main(int argc, char **argv)
"test mpi derived type management",
PARATESTFILE);
+ AddTest("actualio", actual_io_mode_tests, NULL,
+ "test actual io mode proprerty",
+ PARATESTFILE);
/* Display testing information */
TestInfo(argv[0]);
diff --git a/testpar/testphdf5.h b/testpar/testphdf5.h
index 2b83047..11656f9 100644
--- a/testpar/testphdf5.h
+++ b/testpar/testphdf5.h
@@ -160,6 +160,19 @@ enum H5TEST_COLL_CHUNK_API {API_NONE=0,API_LINK_HARD,
#define NPOINTS 4 /* Number of points that will be selected
and overwritten */
+/* Definitions of the selection mode for the test_actual_io_function. */
+#define TEST_ACTUAL_IO_NO_COLLECTIVE 0
+#define TEST_ACTUAL_IO_RESET 1
+#define TEST_ACTUAL_IO_MULTI_CHUNK_IND 2
+#define TEST_ACTUAL_IO_MULTI_CHUNK_COL 3
+#define TEST_ACTUAL_IO_MULTI_CHUNK_MIX 4
+#define TEST_ACTUAL_IO_MULTI_CHUNK_MIX_DISAGREE 5
+#define TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_IND 6
+#define TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_COL 7
+#define TEST_ACTUAL_IO_MULTI_CHUNK_NO_OPT_MIX_DISAGREE 8
+#define TEST_ACTUAL_IO_LINK_CHUNK 9
+#define TEST_ACTUAL_IO_CONTIGUOUS 10
+
/* Don't erase these lines, they are put here for debugging purposes */
/*
#define MSPACE1_RANK 1
@@ -173,9 +186,9 @@ enum H5TEST_COLL_CHUNK_API {API_NONE=0,API_LINK_HARD,
#define MSPACE_DIM1 8
#define MSPACE_DIM2 9
#define NPOINTS 4
+*/ /* end of debugging macro */
-*/ /* end of debugging macro */
/* type definitions */
typedef struct H5Ptest_param_t /* holds extra test parameters */
{
@@ -222,6 +235,7 @@ void dataset_readAll(void);
void extend_readInd(void);
void extend_readAll(void);
void none_selection_chunk(void);
+void actual_io_mode_tests(void);
void test_chunk_alloc(void);
void test_filter_read(void);
void compact_dataset(void);