summaryrefslogtreecommitdiffstats
path: root/testpar
diff options
context:
space:
mode:
Diffstat (limited to 'testpar')
-rw-r--r--testpar/t_mpi.c68
-rw-r--r--testpar/testphdf5.h22
2 files changed, 68 insertions, 22 deletions
diff --git a/testpar/t_mpi.c b/testpar/t_mpi.c
index f5f362a..7f4eef1 100644
--- a/testpar/t_mpi.c
+++ b/testpar/t_mpi.c
@@ -19,8 +19,8 @@ const char *FILENAME[2]={
"MPItest",
NULL};
char filenames[2][200];
-int nerrors;
-int verbose;
+int nerrors = 0;
+int verbose = 0;
hid_t fapl; /* file access property list */
#define MPIO_TEST_WRITE_SIZE 1024*1024 /* 1 MB */
@@ -38,6 +38,7 @@ test_mpio_overlap_writes(char *filename)
hid_t acc_tpl; /* File access properties */
herr_t ret; /* generic return value */
int i;
+ int vrfyerrs;
char buf[4093]; /* use some prime number for size */
int bufsize = sizeof(buf);
int stride;
@@ -125,13 +126,17 @@ test_mpio_overlap_writes(char *filename)
mrc = MPI_File_read_at(fh, mpi_off, buf, stride, MPI_BYTE,
&mpi_stat);
VRFY((mrc==MPI_SUCCESS), "");
+ vrfyerrs=0;
for (i=0; i<stride; i++){
char expected;
expected = (mpi_off+i) & 0x7f;
- if (buf[i] != expected)
- printf("proc %d: found data error at [%ld], expect %d, got %d\n",
- mpi_rank, mpi_off+i, expected, buf[i]);
+ if ((buf[i] != expected) &&
+ (vrfyerrs++ < MAX_ERR_REPORT || verbose))
+ printf("proc %d: found data error at [%ld], expect %d, got %d\n",
+ mpi_rank, mpi_off+i, expected, buf[i]);
}
+ if (vrfyerrs > MAX_ERR_REPORT && !verbose)
+ printf("proc %d: [more errors ...]\n", mpi_rank);
}
/* close file and free the communicator */
@@ -156,6 +161,8 @@ test_mpio_overlap_writes(char *filename)
#define FOUR_GB_LESS1 4294967295L /* 2**32 - 1 */
/*
* Verify that MPI_Offset exceeding 2**31 can be computed correctly.
+ * Print any failure as information only, not as an error so that this
+ * won't abort the remaining test or other separated tests.
*/
void
test_mpio_offset()
@@ -174,8 +181,8 @@ test_mpio_offset()
/* verify correctness of assigning 2GB sizes */
mpi_off = 2 * 1024 * (MPI_Offset)MB;
- VRFY((mpi_off>0), "2GB OFFSET assignment no overflow");
- VRFY((mpi_off-1)==TWO_GB_LESS1, "2GB OFFSET assignment succeed");
+ INFO((mpi_off>0), "2GB OFFSET assignment no overflow");
+ INFO((mpi_off-1)==TWO_GB_LESS1, "2GB OFFSET assignment succeed");
/* verify correctness of increasing from below 2 GB to above 2GB */
mpi_off = TWO_GB_LESS1;
@@ -183,15 +190,15 @@ test_mpio_offset()
mpi_off_old = mpi_off;
mpi_off = mpi_off + 1;
/* no overflow */
- VRFY((mpi_off>0), "2GB OFFSET increment no overflow");
+ INFO((mpi_off>0), "2GB OFFSET increment no overflow");
/* correct inc. */
- VRFY((mpi_off-1)==mpi_off_old, "2GB OFFSET increment succeed");
+ INFO((mpi_off-1)==mpi_off_old, "2GB OFFSET increment succeed");
}
/* verify correctness of assigning 4GB sizes */
mpi_off = 4 * 1024 * (MPI_Offset)MB;
- VRFY((mpi_off>0), "4GB OFFSET assignment no overflow");
- VRFY((mpi_off-1)==FOUR_GB_LESS1, "4GB OFFSET assignment succeed");
+ INFO((mpi_off>0), "4GB OFFSET assignment no overflow");
+ INFO((mpi_off-1)==FOUR_GB_LESS1, "4GB OFFSET assignment succeed");
/* verify correctness of increasing from below 4 GB to above 4 GB */
mpi_off = FOUR_GB_LESS1;
@@ -199,9 +206,9 @@ test_mpio_offset()
mpi_off_old = mpi_off;
mpi_off = mpi_off + 1;
/* no overflow */
- VRFY((mpi_off>0), "4GB OFFSET increment no overflow");
+ INFO((mpi_off>0), "4GB OFFSET increment no overflow");
/* correct inc. */
- VRFY((mpi_off-1)==mpi_off_old, "4GB OFFSET increment succeed");
+ INFO((mpi_off-1)==mpi_off_old, "4GB OFFSET increment succeed");
}
}
@@ -226,6 +233,8 @@ test_mpio_gb_file(char *filename)
hid_t acc_tpl; /* File access properties */
herr_t ret; /* generic return value */
int i, j, n;
+ int vrfyerrs;
+ int writerrs; /* write errors */
int ntimes; /* how many times */
char *buf;
char expected;
@@ -260,6 +269,7 @@ test_mpio_gb_file(char *filename)
* some data around the 2 and 4 GB boundaries. That should cover
* potential integer overflow and filesystem size limits.
*/
+ writerrs = 0;
for (n=2; n <= 4; n+=2){
ntimes = GB/MB*n/mpi_size + 1;
for (i=ntimes-2; i <= ntimes; i++){
@@ -274,7 +284,9 @@ test_mpio_gb_file(char *filename)
printf("proc %d: writing %d bytes at offset %lld\n",
mpi_rank, MB, mpi_off);
mrc = MPI_File_write_at(fh, mpi_off, buf, MB, MPI_BYTE, &mpi_stat);
- VRFY((mrc==MPI_SUCCESS), "");
+ INFO((mrc==MPI_SUCCESS), "");
+ if (mrc!=MPI_SUCCESS)
+ writerrs++;
}
}
@@ -286,11 +298,16 @@ test_mpio_gb_file(char *filename)
VRFY((mrc==MPI_SUCCESS), "Sync after writes");
/* open it again to verify the data written */
+ /* but only if there was no write errors */
+ printf("MPIO GB file read test %s\n", filename);
+ if (writerrs){
+ printf("proc %d: Skip read test due to previous write errors\n",
+ mpi_rank);
+ return;
+ }
mrc = MPI_File_open(MPI_COMM_WORLD, filename, MPI_MODE_RDONLY, info, &fh);
VRFY((mrc==MPI_SUCCESS), "");
- printf("MPIO GB file read test %s\n", filename);
-
/* Only read back parts of the file that have been written. */
for (n=2; n <= 4; n+=2){
ntimes = GB/MB*n/mpi_size + 1;
@@ -300,12 +317,18 @@ test_mpio_gb_file(char *filename)
printf("proc %d: read from mpi_off=%016llx, %lld\n",
mpi_rank, mpi_off, mpi_off);
mrc = MPI_File_read_at(fh, mpi_off, buf, MB, MPI_BYTE, &mpi_stat);
- VRFY((mrc==MPI_SUCCESS), "");
+ INFO((mrc==MPI_SUCCESS), "");
expected = i*mpi_size + (mpi_size - mpi_rank - 1);
- for (j=0; j<MB; j++)
- if (*(buf+j) != expected)
- printf("proc %d: found data error at [%ld+%d], expect %d, got %d\n",
- mpi_rank, mpi_off, j, expected, *(buf+j));
+ vrfyerrs=0;
+ for (j=0; j<MB; j++){
+ if ((*(buf+j) != expected) &&
+ (vrfyerrs++ < MAX_ERR_REPORT || verbose))
+ printf("proc %d: found data error at [%ld+%d], expect %d, got %d\n",
+ mpi_rank, mpi_off, j, expected, *(buf+j));
+ }
+ if (vrfyerrs > MAX_ERR_REPORT && !verbose)
+ printf("proc %d: [more errors ...]\n", mpi_rank);
+
}
}
@@ -434,6 +457,7 @@ finish:
}
MPI_Finalize();
h5_cleanup(FILENAME, fapl);
- return(nerrors);
+ /* always return 0 as this test is informational only. */
+ return(0);
}
diff --git a/testpar/testphdf5.h b/testpar/testphdf5.h
index b73a1f9..7d24ea0 100644
--- a/testpar/testphdf5.h
+++ b/testpar/testphdf5.h
@@ -35,6 +35,26 @@
H5Eclear(); \
} while(0)
+/*
+ * Checking for information purpose.
+ * If val is false, print mesg; else nothing.
+ * Either case, no error setting.
+ */
+#define INFO(val, mesg) do { \
+ if (val) { \
+ if (*mesg != '\0'){ \
+ MESG(mesg); \
+ } \
+ } \
+ else{ \
+ printf("Proc %d: ", mpi_rank); \
+ printf("*** PHDF5 Assertion failed (%s) at line %4d in %s\n", \
+ mesg, (int)__LINE__, __FILE__); \
+ fflush(stdout); \
+ } \
+ H5Eclear(); \
+} while(0)
+
#define MPI_BANNER(mesg)\
{printf("--------------------------------\n");\
printf("Proc %d: ", mpi_rank); \
@@ -59,6 +79,8 @@
#define BYCOL 2 /* divide into blocks of columns */
#define ZROW 3 /* same as BYCOL except process 0 gets 0 rows */
#define ZCOL 4 /* same as BYCOL except process 0 gets 0 columns */
+#define MAX_ERR_REPORT 10 /* Maximum number of errors reported */
+
/* dataset data type. Int's can be easily octo dumped. */