summaryrefslogtreecommitdiffstats
path: root/tools/h5copy/testh5copy.sh.in
diff options
context:
space:
mode:
Diffstat (limited to 'tools/h5copy/testh5copy.sh.in')
-rw-r--r--tools/h5copy/testh5copy.sh.in557
1 files changed, 557 insertions, 0 deletions
diff --git a/tools/h5copy/testh5copy.sh.in b/tools/h5copy/testh5copy.sh.in
new file mode 100644
index 0000000..c7acd9a
--- /dev/null
+++ b/tools/h5copy/testh5copy.sh.in
@@ -0,0 +1,557 @@
+#! /bin/sh
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5. The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html. COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page. It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# Tests for the h5copy tool
+#
+# Pedro Vicente Nunes (pvn@hdfgroup.org), Albert Cheng (acheng@hdfgroup.org)
+# Thursday, July 20, 2006
+#
+
+srcdir=@srcdir@
+
+# source dirs
+SRC_TOOLS="$srcdir/.."
+SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
+# testfiles source dirs for tools
+SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
+SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
+SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
+SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
+SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
+SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
+
+TESTNAME=h5copy
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+######################################################################
+# test files
+# --------------------------------------------------------------------
+# All the test files copy from source directory to test directory
+# NOTE: Keep this framework to add/remove test files.
+# Any test files from other tools can be used in this framework.
+# This list are also used for checking exist.
+# Comment '#' without space can be used.
+# --------------------------------------------------------------------
+# List of files that will be copied over to local test dir
+LIST_HDF5_TEST_FILES="
+$SRC_H5COPY_TESTFILES/h5copytst.h5
+$SRC_H5COPY_TESTFILES/h5copy_ref.h5
+$SRC_H5COPY_TESTFILES/h5copy_extlinks_src.h5
+$SRC_H5COPY_TESTFILES/h5copy_extlinks_trg.h5
+"
+
+# List of expect files that will be copied over to local test dir
+LIST_OTHER_TEST_FILES="
+$SRC_H5COPY_TESTFILES/h5copy_extlinks_src.out.ls
+$SRC_H5COPY_TESTFILES/h5copy_ref.out.ls
+$SRC_H5COPY_TESTFILES/h5copytst.out.ls
+$SRC_H5COPY_TESTFILES/h5copy_misc1.out
+"
+
+H5COPY=h5copy # The tool name
+H5COPY_BIN=`pwd`/$H5COPY # The path of the tool binary
+H5DIFF=h5diff # The h5diff tool name
+H5DIFF_BIN=`pwd`/../h5diff/$H5DIFF # The path of the h5diff tool binary
+H5LS=h5ls # The h5ls tool name
+H5LS_ARGS=-Svr # Arguments to the h5ls tool
+H5LS_BIN=`pwd`/../h5ls/$H5LS # The path of the h5ls tool binary
+CMP='cmp -s'
+DIFF='diff -c'
+CP='cp'
+DIRNAME='dirname'
+LS='ls'
+AWK='awk'
+
+nerrors=0
+verbose=yes
+h5haveexitcode=yes # default is yes
+
+TESTDIR=./testfiles
+test -d $TESTDIR || mkdir $TESTDIR
+
+# RUNSERIAL is used. Check if it can return exit code from executalbe correctly.
+if [ -n "$RUNSERIAL_NOEXITCODE" ]; then
+ echo "***Warning*** Serial Exit Code is not passed back to shell corretly."
+ echo "***Warning*** Exit code checking is skipped."
+ h5haveexitcode=no
+fi
+
+#
+# copy test files and expected output files from source dirs to test dir
+#
+COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
+
+COPY_TESTFILES_TO_TESTDIR()
+{
+ # copy test files. Used -f to make sure get a new copy
+ for tstfile in $COPY_TESTFILES
+ do
+ # ignore '#' comment
+ echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
+ RET=$?
+ if [ $RET -eq 1 ]; then
+ # skip cp if srcdir is same as destdir
+ # this occurs when build/test performed in source dir and
+ # make cp fail
+ SDIR=`$DIRNAME $tstfile`
+ INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
+ INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
+ if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
+ $CP -f $tstfile $TESTDIR
+ if [ $? -ne 0 ]; then
+ echo "Error: FAILED to copy $tstfile ."
+
+ # Comment out this to CREATE expected file
+ exit $EXIT_FAILURE
+ fi
+ fi
+ fi
+ done
+}
+
+
+# Print a "SKIP" message
+SKIP() {
+ TESTING $H5COPY $@
+ echo " -SKIP-"
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Testing".
+TESTING()
+{
+ SPACES=" "
+ echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+VERIFY()
+{
+ SPACES=" "
+ echo "Verifying h5diff output $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+VERIFY_H5LS()
+{
+ SPACES=" "
+ echo "Verifying h5ls file structure $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+VERIFY_OUTPUT()
+{
+ SPACES=" "
+ echo "Verifying output files $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Source in the output filter function definitions.
+. $srcdir/../../bin/output_filter.sh
+
+# Run a test and print PASS or *FAIL*. If h5copy can complete
+# with exit status 0, consider it pass. If a test fails then increment
+# the `nerrors' global variable.
+# Assumed arguments:
+# $1 is -i
+# $2 is input file
+# $3 is -o
+# $4 is output file
+# $* everything else arguments for h5copy.
+
+TOOLTEST()
+{
+ actualout="$TESTDIR/tooltest.actualout"
+ actualerr="$TESTDIR/tooltest.actualerr"
+ runh5diff=yes
+ if [ "$1" = -i ]; then
+ inputfile=$2
+ else
+ runh5diff=no
+ fi
+ if [ "$3" = -o ]; then
+ outputfile=$4
+ else
+ runh5diff=no
+ fi
+
+ TESTING $H5COPY $@
+ (
+ echo "#############################"
+ echo " output for '$H5COPY $@'"
+ echo "#############################"
+ $RUNSERIAL $H5COPY_BIN $@
+ ) > $actualout 2> $actualerr
+ RET=$?
+ if [ $RET != 0 ]; then
+ echo "*FAILED*"
+ echo "failed result is:"
+ cat $actualout
+ nerrors="`expr $nerrors + 1`"
+ else
+ echo " PASSED"
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actualout $actualerr
+ fi
+ fi
+
+ if [ $runh5diff != no ]; then
+ H5DIFFTEST $inputfile $outputfile $7 $9
+ fi
+}
+
+
+# Compare the two text files
+# PASS if same
+# FAIL if different, and show the diff
+#
+# Assumed arguments:
+# $1 is text file1 (expected output)
+# $2 is text file2 (actual output)
+CMP_OUTPUT()
+{
+ expect=$1
+ actual=$2
+
+ VERIFY_OUTPUT $@
+ if [ ! -f $expect ]; then
+ # Create the expect file if it doesn't yet exist.
+ echo " CREATED"
+ cp $actual $expect
+ elif $CMP $expect $actual; then
+ echo " PASSED"
+ else
+ echo "*FAILED*"
+ echo " Expected output differs from actual output"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
+ fi
+}
+
+TOOLTEST_FAIL()
+{
+ expectout="$TESTDIR/$1"
+ actualout="$TESTDIR/$1.actualout"
+ actualerr="$TESTDIR/$1.actualerr"
+ actualout_sav=${actualout}-sav
+ actualerr_sav=${actualerr}-sav
+ shift
+ if [ "$1" = -i ]; then
+ inputfile=$2
+ fi
+ if [ "$3" = -o ]; then
+ outputfile=$4
+ fi
+
+ TESTING $H5COPY $@
+ (
+ #echo "#############################"
+ #echo " output for '$H5COPY $@'"
+ #echo "#############################"
+ $RUNSERIAL $H5COPY_BIN $@
+ ) > $actualout 2> $actualerr
+
+ RET=$?
+ # save actualout and actualerr in case they are needed later.
+ cp $actualout $actualout_sav
+ STDOUT_FILTER $actualout
+ cp $actualerr $actualerr_sav
+ STDERR_FILTER $actualerr
+ if [ $RET != 0 ]; then
+ echo " PASSED"
+ # Verifying output text from h5copy
+ if [ "$expectout" != "SKIP" ]; then
+ # combine stderr to stdout to compare the output at once.
+ # We may seperate stdout and stderr later.
+ cat $actualerr >> $actualout
+ CMP_OUTPUT $expectout $actualout
+ fi
+ else
+ echo "*FAILED*"
+ echo "failed result is:"
+ cat $actualout
+ nerrors="`expr $nerrors + 1`"
+ fi
+
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actualout $actualerr $actualout_sav $actualerr_sav
+ fi
+}
+
+
+# Call the h5diff tool
+#
+H5DIFFTEST()
+{
+ VERIFY $@
+ $RUNSERIAL $H5DIFF_BIN -q "$@"
+ RET=$?
+ if [ $RET != 0 ] ; then
+ echo "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
+ else
+ echo " PASSED"
+ fi
+}
+
+# Call the h5diff tool with a call that is expected to fail
+#
+H5DIFFTEST_FAIL()
+{
+ VERIFY $@
+ $RUNSERIAL $H5DIFF_BIN -q "$@"
+ RET=$?
+
+ if [ $h5haveexitcode = 'yes' -a $RET != 1 ] ; then
+ echo "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
+ else
+ echo " PASSED"
+ fi
+}
+
+# Call the h5ls tool to verify the correct output data in the destination file
+#
+H5LSTEST()
+{
+ expect="$TESTDIR/`basename $1 .h5`.ls"
+ actual="$TESTDIR/`basename $1 .h5`.ls.actualout"
+
+ # Stderr is included in stdout so that the diff can detect
+ # any unexpected output from that stream too.
+ #
+ # Note: The modification time and storage utilization are masked off
+ # so that the output is more portable
+ VERIFY_H5LS $@
+ (
+ $RUNSERIAL $H5LS_BIN $H5LS_ARGS $@
+ ) 2>&1 |sed 's/Modified:.*/Modified: XXXX-XX-XX XX:XX:XX XXX/' |sed 's/Storage:.*/Storage: <details removed for portability>/' >$actual
+
+
+ if [ ! -f $expect ]; then
+ # Create the expect file if it doesn't yet exist.
+ echo " CREATED"
+ cp $actual $expect
+ elif $CMP $expect $actual; then
+ echo " PASSED"
+ else
+ echo "*FAILED*"
+ echo " Expected result (*.ls) differs from actual result (*.out)"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
+ fi
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actual $actual_err
+ fi
+}
+
+# Copy single datasets of various forms from one group to another,
+# adding object copied to the destination file each time
+#
+# Assumed arguments:
+# <none>
+COPY_OBJECTS()
+{
+ TESTFILE="$TESTDIR/h5copytst.h5"
+ FILEOUT="$TESTDIR/`basename h5copytst.h5 .h5`.out.h5"
+
+ # Remove any output file left over from previous test run
+ rm -f $FILEOUT
+
+ echo "Testing from `basename $TESTFILE` to `basename $FILEOUT` for the following tests:"
+ echo "Test copying various forms of datasets"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s simple -d simple
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s chunk -d chunk
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compact -d compact
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compound -d compound
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compressed -d compressed
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s named_vl -d named_vl
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s nested_vl -d nested_vl
+
+ echo "Test copying dataset within group in source file to root of destination"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets/simple -d simple_top
+
+ echo "Test copying & renaming dataset"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s compound -d rename
+
+ echo "Test copying empty, 'full' & 'nested' groups"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_empty -d grp_empty
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_dsets
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_nested -d grp_nested
+
+ echo "Test copying dataset within group in source file to group in destination"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s /grp_dsets/simple -d /grp_dsets/simple_group
+
+ echo "Test copying & renaming group"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d grp_rename
+
+ echo "Test copying 'full' group hierarchy into group in destination file"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s grp_dsets -d /grp_rename/grp_dsets
+
+ echo "Test copying objects into group hier. that doesn't exist yet in destination file"
+ TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s simple -d /A/B1/simple
+ TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s simple -d /A/B2/simple2
+ TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets/simple -d /C/D/simple
+ TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s /grp_dsets -d /E/F/grp_dsets
+ TOOLTEST -i $TESTFILE -o $FILEOUT -vp -s /grp_nested -d /G/H/grp_nested
+
+ # Verify that the file created above is correct
+ H5LSTEST $FILEOUT
+
+ # Remove output file created, if the "no cleanup" environment variable is
+ # not defined
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $FILEOUT
+ fi
+}
+
+# Copy references in various way.
+# adding to the destination file each time compare the result
+#
+# Assumed arguments:
+# <none>
+COPY_REFERENCES()
+{
+ TESTFILE="$TESTDIR/h5copy_ref.h5"
+ FILEOUT="$TESTDIR/`basename h5copy_ref.h5 .h5`.out.h5"
+
+ # Remove any output file left over from previous test run
+ rm -f $FILEOUT
+
+ echo "Test copying object and region references"
+ TOOLTEST -f ref -i $TESTFILE -o $FILEOUT -v -s / -d /COPY
+
+ # Verify that the file created above is correct
+ H5LSTEST $FILEOUT
+
+ # Remove output file created, if the "no cleanup" environment variable is
+ # not defined
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $FILEOUT
+ fi
+}
+
+# Copy external links.
+# adding to the destination file each time compare the result
+#
+# Assumed arguments:
+# <none>
+COPY_EXT_LINKS()
+{
+ TESTFILE="$TESTDIR/h5copy_extlinks_src.h5"
+ FILEOUT="$TESTDIR/`basename h5copy_extlinks_src.h5 .h5`.out.h5"
+
+ # Remove any output file left over from previous test run
+ rm -f $FILEOUT
+
+ echo "Test copying external link directly without -f ext"
+ TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext/extlink_dset -d /copy1_dset
+
+ echo "Test copying external link directly with -f ext"
+ TOOLTEST -f ext -i $TESTFILE -o $FILEOUT -v -s /group_ext/extlink_dset -d /copy2_dset
+
+ echo "Test copying dangling external link (no obj) directly without -f ext"
+ TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext/extlink_notyet1 -d /copy_dangle1_1
+
+ echo "Test copying dangling external link (no obj) directly with -f ext"
+ TOOLTEST -f ext -i $TESTFILE -o $FILEOUT -v -s /group_ext/extlink_notyet1 -d /copy_dangle1_2
+
+ echo "Test copying dangling external link (no file) directly without -f ext"
+ TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext/extlink_notyet2 -d /copy_dangle2_1
+
+ echo "Test copying dangling external link (no file) directly with -f ext"
+ TOOLTEST -f ext -i $TESTFILE -o $FILEOUT -v -s /group_ext/extlink_notyet2 -d /copy_dangle2_2
+
+ echo "Test copying a group contains external links without -f ext"
+ TOOLTEST -v -i $TESTFILE -o $FILEOUT -s /group_ext -d /copy1_group
+
+ echo "Test copying a group contains external links with -f ext"
+ TOOLTEST -f ext -v -i $TESTFILE -o $FILEOUT -s /group_ext -d /copy2_group
+
+ # Verify that the file created above is correct
+ H5LSTEST $FILEOUT
+
+ # Remove output file created, if the "no cleanup" environment variable is
+ # not defined
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $FILEOUT
+ fi
+}
+
+# Test misc.
+#
+# Assumed arguments:
+# <none>
+TEST_MISC()
+{
+ TESTFILE="$TESTDIR/h5copytst.h5"
+ FILEOUT="$TESTDIR/`basename h5copytst.h5 .h5`.out.h5"
+
+ # Remove any output file left over from previous test run
+ rm -f $FILEOUT
+
+ echo "Test copying object into group which doesn't exist, without -p"
+ TOOLTEST_FAIL h5copy_misc1.out -v -i $TESTFILE -o $FILEOUT -s /simple -d /g1/g2/simple
+
+ echo "Test copying objects to the same file "
+ rm -f $FILEOUT
+ # create temporary test file ($FILEOUT) with some objects
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s /simple -d /simple
+ TOOLTEST -i $TESTFILE -o $FILEOUT -v -s /grp_dsets -d /grp_dsets
+ # actual test cases
+ TOOLTEST -i $FILEOUT -o $FILEOUT -v -s /simple -d /simple_cp
+ TOOLTEST -i $FILEOUT -o $FILEOUT -v -s /grp_dsets -d /grp_dsets_cp
+
+ # Remove output file created, if the "no cleanup" environment variable is
+ # not defined
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $FILEOUT
+ fi
+}
+
+##############################################################################
+### T H E T E S T S ###
+##############################################################################
+# prepare for test
+COPY_TESTFILES_TO_TESTDIR
+
+# Start tests
+COPY_OBJECTS
+COPY_REFERENCES
+COPY_EXT_LINKS
+TEST_MISC
+
+
+if test $nerrors -eq 0 ; then
+ echo "All $TESTNAME tests passed."
+ exit $EXIT_SUCCESS
+else
+ echo "$TESTNAME tests failed with $nerrors errors."
+ exit $EXIT_FAILURE
+fi
generated by cgit v0.12 at 2024-11-16 22:17:47 (GMT)