summaryrefslogtreecommitdiffstats
path: root/tools/h5copy/testh5copy.sh.in
diff options
context:
space:
mode:
Diffstat (limited to 'tools/h5copy/testh5copy.sh.in')
-rw-r--r--tools/h5copy/testh5copy.sh.in607
1 files changed, 0 insertions, 607 deletions
diff --git a/tools/h5copy/testh5copy.sh.in b/tools/h5copy/testh5copy.sh.in
deleted file mode 100644
index 859d7c8..0000000
--- a/tools/h5copy/testh5copy.sh.in
+++ /dev/null
@@ -1,607 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5copy tool
-#
-# Pedro Vicente Nunes (pvn@hdfgroup.org), Albert Cheng (acheng@hdfgroup.org)
-# Thursday, July 20, 2006
-#
-
-srcdir=@srcdir@
-
-# source dirs
-SRC_TOOLS="$srcdir/.."
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-# testfiles source dirs for tools
-SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
-SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
-SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
-SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
-SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
-SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
-
-TESTNAME=h5copy
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-# Any test files from other tools can be used in this framework.
-# This list are also used for checking exist.
-# Comment '#' without space can be used.
-# --------------------------------------------------------------------
-# List of files that will be copied over to local test dir
-LIST_HDF5_TEST_FILES="
-$SRC_H5COPY_TESTFILES/h5copytst.h5
-$SRC_H5COPY_TESTFILES/h5copy_ref.h5
-$SRC_H5COPY_TESTFILES/h5copy_extlinks_src.h5
-$SRC_H5COPY_TESTFILES/h5copy_extlinks_trg.h5
-"
-
-# List of expect files that will be copied over to local test dir
-LIST_OTHER_TEST_FILES="
-$SRC_H5COPY_TESTFILES/h5copy_misc1.out
-"
-
-H5COPY=h5copy # The tool name
-H5COPY_BIN=`pwd`/$H5COPY # The path of the tool binary
-H5DIFF=h5diff # The h5diff tool name
-H5DIFF_BIN=`pwd`/../h5diff/$H5DIFF # The path of the h5diff tool binary
-H5LS=h5ls # The h5ls tool name
-H5LS_ARGS=-Svr # Arguments to the h5ls tool
-H5LS_BIN=`pwd`/../h5ls/$H5LS # The path of the h5ls tool binary
-
-RM='rm -rf'
-CMP='cmp -s'
-DIFF='diff -c'
-CP='cp'
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-nerrors=0
-verbose=yes
-h5haveexitcode=yes # default is yes
-
-TESTDIR=./testfiles
-test -d $TESTDIR || mkdir $TESTDIR
-
-# RUNSERIAL is used. Check if it can return exit code from executalbe correctly.
-if [ -n "$RUNSERIAL_NOEXITCODE" ]; then
- echo "***Warning*** Serial Exit Code is not passed back to shell corretly."
- echo "***Warning*** Exit code checking is skipped."
- h5haveexitcode=no
-fi
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
- # copy test files. Used -f to make sure get a new copy
- for tstfile in $COPY_TESTFILES
- do
- # ignore '#' comment
- echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
- RET=$?
- if [ $RET -eq 1 ]; then
- # skip cp if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=`$DIRNAME $tstfile`
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $CP -f $tstfile $TESTDIR
- if [ $? -ne 0 ]; then
- echo "Error: FAILED to copy $tstfile ."
-
- # Comment out this to CREATE expected file
- exit $EXIT_FAILURE
- fi
- fi
- fi
- done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
- # skip rm if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=$SRC_H5COPY_TESTFILES
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $RM $TESTDIR
- fi
-}
-
-
-# Print a "SKIP" message
-SKIP() {
- TESTING $H5COPY $@
- echo " -SKIP-"
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-TESTING()
-{
- SPACES=" "
- echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Verifying".
-#
-VERIFY()
-{
- SPACES=" "
- echo "Verifying h5diff output $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Verifying".
-#
-VERIFY_OUTPUT()
-{
- SPACES=" "
- echo "Verifying output files $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Source in the output filter function definitions.
-. $srcdir/../../bin/output_filter.sh
-
-# Run a test and print PASS or *FAIL*. If h5copy can complete
-# with exit status 0, consider it pass. If a test fails then increment
-# the `nerrors' global variable.
-# Assumed arguments:
-# $1 is -i
-# $2 is input file
-# $3 is -o
-# $4 is output file
-# $* everything else arguments for h5copy.
-
-TOOLTEST()
-{
- actualout="$TESTDIR/tooltest.actualout"
- actualerr="$TESTDIR/tooltest.actualerr"
- runh5diff=yes
- if [ "$1" = -i ]; then
- inputfile=$2
- else
- if [ "$1" = -f ]; then
- inputfile=$4
- else
- inputfile=$3
- fi
- runh5diff=no
- fi
- if [ "$3" = -o ]; then
- outputfile=$4
- else
- if [ "$1" = -f ]; then
- outputfile=$6
- else
- outputfile=$5
- fi
- runh5diff=no
- fi
-
- TESTING $H5COPY $@
- (
- echo "#############################"
- echo " output for '$H5COPY $@'"
- echo "#############################"
- $RUNSERIAL $H5COPY_BIN $@
- ) > $actualout 2> $actualerr
- RET=$?
- if [ $RET != 0 ]; then
- echo "*FAILED*"
- echo "failed result is:"
- cat $actualout
- nerrors="`expr $nerrors + 1`"
- else
- echo " PASSED"
-
- if [ $runh5diff != no ]; then
- H5DIFFTEST $inputfile $outputfile $7 $9
- fi
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actualout $actualerr $outputfile
- fi
- fi
-}
-
-# TOOLTEST back-to-back
-TOOLTEST_PREFILL()
-{
- actualout="$TESTDIR/tooltest.actualout"
- actualerr="$TESTDIR/tooltest.actualerr"
- runh5diff=yes
- if [ "$1" = -i ]; then
- inputfile=$2
- else
- runh5diff=no
- fi
- if [ "$3" = -o ]; then
- outputfile=$4
- else
- runh5diff=no
- fi
-
- grp_name=$5
- grp_name2=$6
- obj_name=$7
- obj_name2=$8
-
- TESTING $H5COPY $@
- (
- echo "#############################"
- echo " output for '$H5COPY $@'"
- echo "#############################"
- $RUNSERIAL $H5COPY_BIN -i $inputfile -o $outputfile -v -s $grp_name -d $grp_name2
- ) > $actualout 2> $actualerr
- RET=$?
- if [ $RET != 0 ]; then
- echo "*FAILED*"
- echo "failed result is:"
- cat $actualout
- nerrors="`expr $nerrors + 1`"
- else
- TESTING $H5COPY $@
- (
- echo "#############################"
- echo " output for '$H5COPY $@'"
- echo "#############################"
- $RUNSERIAL $H5COPY_BIN -i $inputfile -o $outputfile -v -s $obj_name -d $obj_name2
- ) > $actualout 2> $actualerr
- RET=$?
- if [ $RET != 0 ]; then
- echo "*FAILED*"
- echo "failed result is:"
- cat $actualout
- nerrors="`expr $nerrors + 1`"
- else
- echo " PASSED"
-
- if [ $runh5diff != no ]; then
- H5DIFFTEST $inputfile $outputfile $obj_name $obj_name2
- fi
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actualout $actualerr $outputfile
- fi
- fi
- fi
-}
-
-# TOOLTEST back-to-back
-TOOLTEST_SAME()
-{
- actualout="$TESTDIR/tooltest.actualout"
- actualerr="$TESTDIR/tooltest.actualerr"
- runh5diff=yes
- if [ "$1" = -i ]; then
- inputfile=$2
- else
- runh5diff=no
- fi
- if [ "$3" = -o ]; then
- outputfile=$4
- else
- runh5diff=no
- fi
-
- grp_name=$5
- grp_name2=$6
-
- TESTING $H5COPY $@
- (
- echo "#############################"
- echo " output for '$H5COPY $@'"
- echo "#############################"
- $RUNSERIAL $H5COPY_BIN -i $inputfile -o $outputfile -v -s $grp_name -d $grp_name
- ) > $actualout 2> $actualerr
- RET=$?
- if [ $RET != 0 ]; then
- echo "*FAILED*"
- echo "failed result is:"
- cat $actualout
- nerrors="`expr $nerrors + 1`"
- else
- TESTING $H5COPY $@
- (
- echo "#############################"
- echo " output for '$H5COPY $@'"
- echo "#############################"
- $RUNSERIAL $H5COPY_BIN -i $outputfile -o $outputfile -v -s $grp_name -d $grp_name2
- ) > $actualout 2> $actualerr
- RET=$?
- if [ $RET != 0 ]; then
- echo "*FAILED*"
- echo "failed result is:"
- cat $actualout
- nerrors="`expr $nerrors + 1`"
- else
- echo " PASSED"
-
- if [ $runh5diff != no ]; then
- H5DIFFTEST $outputfile $outputfile $grp_name $grp_name2
- fi
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actualout $actualerr $outputfile
- fi
- fi
- fi
-}
-
-
-# Compare the two text files
-# PASS if same
-# FAIL if different, and show the diff
-#
-# Assumed arguments:
-# $1 is text file1 (expected output)
-# $2 is text file2 (actual output)
-CMP_OUTPUT()
-{
- expect=$1
- actual=$2
-
- VERIFY_OUTPUT $@
- if [ ! -f $expect ]; then
- # Create the expect file if it doesn't yet exist.
- echo " CREATED"
- cp $actual $expect
- elif $CMP $expect $actual; then
- echo " PASSED"
- else
- echo "*FAILED*"
- echo " Expected output differs from actual output"
- nerrors="`expr $nerrors + 1`"
- test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
- fi
-}
-
-TOOLTEST_FAIL()
-{
- expectout="$TESTDIR/$1"
- actualout="$TESTDIR/$1.actualout"
- actualerr="$TESTDIR/$1.actualerr"
- actualout_sav=${actualout}-sav
- actualerr_sav=${actualerr}-sav
- shift
- if [ "$1" = -i ]; then
- inputfile=$2
- fi
- if [ "$3" = -o ]; then
- outputfile=$4
- fi
-
- TESTING $H5COPY $@
- (
- #echo "#############################"
- #echo " output for '$H5COPY $@'"
- #echo "#############################"
- $RUNSERIAL $H5COPY_BIN $@
- ) > $actualout 2> $actualerr
-
- RET=$?
- # save actualout and actualerr in case they are needed later.
- cp $actualout $actualout_sav
- STDOUT_FILTER $actualout
- cp $actualerr $actualerr_sav
- STDERR_FILTER $actualerr
- if [ $RET != 0 ]; then
- echo " PASSED"
- # Verifying output text from h5copy
- if [ "$expectout" != "SKIP" ]; then
- # combine stderr to stdout to compare the output at once.
- # We may seperate stdout and stderr later.
- cat $actualerr >> $actualout
- CMP_OUTPUT $expectout $actualout
- fi
- else
- echo "*FAILED*"
- echo "failed result is:"
- cat $actualout
- nerrors="`expr $nerrors + 1`"
- fi
-
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actualout $actualerr $actualout_sav $actualerr_sav $outputfile
- fi
-}
-
-
-# Call the h5diff tool
-#
-H5DIFFTEST()
-{
- VERIFY $@
- $RUNSERIAL $H5DIFF_BIN -q "$@"
- RET=$?
- if [ $RET != 0 ] ; then
- echo "*FAILED*"
- nerrors="`expr $nerrors + 1`"
- else
- echo " PASSED"
- fi
-}
-
-# Call the h5diff tool with a call that is expected to fail
-#
-H5DIFFTEST_FAIL()
-{
- VERIFY $@
- $RUNSERIAL $H5DIFF_BIN -q "$@"
- RET=$?
-
- if [ $h5haveexitcode = 'yes' -a $RET != 1 ] ; then
- echo "*FAILED*"
- nerrors="`expr $nerrors + 1`"
- else
- echo " PASSED"
- fi
-}
-
-# Copy single datasets of various forms from one group to another,
-# adding object copied to the destination file each time
-#
-# Assumed arguments:
-# <none>
-COPY_OBJECTS()
-{
- TESTFILE="$TESTDIR/h5copytst.h5"
-
- echo "Test copying various forms of datasets"
- TOOLTEST -i $TESTFILE -o $TESTDIR/simple.out.h5 -v -s simple -d simple
- TOOLTEST -i $TESTFILE -o $TESTDIR/chunk.out.h5 -v -s chunk -d chunk
- TOOLTEST -i $TESTFILE -o $TESTDIR/compact.out.h5 -v -s compact -d compact
- TOOLTEST -i $TESTFILE -o $TESTDIR/compound.out.h5 -v -s compound -d compound
- TOOLTEST -i $TESTFILE -o $TESTDIR/compressed.out.h5 -v -s compressed -d compressed
- TOOLTEST -i $TESTFILE -o $TESTDIR/named_vl.out.h5 -v -s named_vl -d named_vl
- TOOLTEST -i $TESTFILE -o $TESTDIR/nested_vl.out.h5 -v -s nested_vl -d nested_vl
- TOOLTEST -i $TESTFILE -o $TESTDIR/dset_attr.out.h5 -v -s /dset_attr -d /dset_attr
-
- echo "Test copying dataset within group in source file to root of destination"
- TOOLTEST -i $TESTFILE -o $TESTDIR/simple_top.out.h5 -v -s grp_dsets/simple -d simple_top
-
- echo "Test copying & renaming dataset"
- TOOLTEST -i $TESTFILE -o $TESTDIR/dsrename.out.h5 -v -s compound -d rename
-
- echo "Test copying empty, 'full' & 'nested' groups"
- TOOLTEST -i $TESTFILE -o $TESTDIR/grp_empty.out.h5 -v -s grp_empty -d grp_empty
- TOOLTEST -i $TESTFILE -o $TESTDIR/grp_dsets.out.h5 -v -s grp_dsets -d grp_dsets
- TOOLTEST -i $TESTFILE -o $TESTDIR/grp_nested.out.h5 -v -s grp_nested -d grp_nested
- TOOLTEST -i $TESTFILE -o $TESTDIR/grp_attr.out.h5 -v -s grp_attr -d grp_attr
-
- echo "Test copying dataset within group in source file to group in destination"
- TOOLTEST_PREFILL -i $TESTFILE -o $TESTDIR/simple_group.out.h5 grp_dsets grp_dsets /grp_dsets/simple /grp_dsets/simple_group
-
- echo "Test copying & renaming group"
- TOOLTEST -i $TESTFILE -o $TESTDIR/grp_rename.out.h5 -v -s grp_dsets -d grp_rename
-
- echo "Test copying 'full' group hierarchy into group in destination file"
- TOOLTEST_PREFILL -i $TESTFILE -o $TESTDIR/grp_dsets_rename.out.h5 grp_dsets grp_rename grp_dsets /grp_rename/grp_dsets
-
- echo "Test copying objects into group hier. that doesn't exist yet in destination file"
- TOOLTEST -i $TESTFILE -o $TESTDIR/A_B1_simple.out.h5 -vp -s simple -d /A/B1/simple
- TOOLTEST -i $TESTFILE -o $TESTDIR/A_B2_simple2.out.h5 -vp -s simple -d /A/B2/simple2
- TOOLTEST -i $TESTFILE -o $TESTDIR/C_D_simple.out.h5 -vp -s /grp_dsets/simple -d /C/D/simple
- TOOLTEST -i $TESTFILE -o $TESTDIR/E_F_grp_dsets.out.h5 -vp -s /grp_dsets -d /E/F/grp_dsets
- TOOLTEST -i $TESTFILE -o $TESTDIR/G_H_grp_nested.out.h5 -vp -s /grp_nested -d /G/H/grp_nested
-}
-
-# Copy references in various way.
-#
-# Assumed arguments:
-# <none>
-COPY_REFERENCES()
-{
- TESTFILE="$TESTDIR/h5copy_ref.h5"
-
- echo "Test copying object and region references"
- TOOLTEST -f ref -i $TESTFILE -o $TESTDIR/region_ref.out.h5 -v -s / -d /COPY
-}
-
-# Copy external links.
-# adding to the destination file each time compare the result
-#
-# Assumed arguments:
-# <none>
-COPY_EXT_LINKS()
-{
- TESTFILE="$TESTDIR/h5copy_extlinks_src.h5"
-
- echo "Test copying external link directly without -f ext"
- TOOLTEST -v -i $TESTFILE -o $TESTDIR/ext_link.out.h5 -s /group_ext/extlink_dset -d /copy1_dset
-
- echo "Test copying external link directly with -f ext"
- TOOLTEST -f ext -i $TESTFILE -o $TESTDIR/ext_link_f.out.h5 -v -s /group_ext/extlink_dset -d /copy2_dset
-
- echo "Test copying dangling external link (no obj) directly without -f ext"
- TOOLTEST -v -i $TESTFILE -o $TESTDIR/ext_dangle_noobj.out.h5 -s /group_ext/extlink_notyet1 -d /copy_dangle1_1
-
- echo "Test copying dangling external link (no obj) directly with -f ext"
- TOOLTEST -f ext -i $TESTFILE -o $TESTDIR/ext_dangle_noobj_f.out.h5 -v -s /group_ext/extlink_notyet1 -d /copy_dangle1_2
-
- echo "Test copying dangling external link (no file) directly without -f ext"
- TOOLTEST -v -i $TESTFILE -o $TESTDIR/ext_dangle_nofile.out.h5 -s /group_ext/extlink_notyet2 -d /copy_dangle2_1
-
- echo "Test copying dangling external link (no file) directly with -f ext"
- TOOLTEST -f ext -i $TESTFILE -o $TESTDIR/ext_dangle_nofile_f.out.h5 -v -s /group_ext/extlink_notyet2 -d /copy_dangle2_2
-
- echo "Test copying a group contains external links without -f ext"
- TOOLTEST -v -i $TESTFILE -o $TESTDIR/ext_link_group.out.h5 -s /group_ext -d /copy1_group
-
- echo "Test copying a group contains external links with -f ext"
- TOOLTEST -f ext -i $TESTFILE -o $TESTDIR/ext_link_group_f.out.h5 -v -s /group_ext -d /copy2_group
-}
-
-# Test misc.
-#
-# Assumed arguments:
-# <none>
-TEST_MISC()
-{
- TESTFILE="$TESTDIR/h5copytst.h5"
-
- echo "Test copying object into group which doesn't exist, without -p"
- TOOLTEST_FAIL h5copy_misc1.out -i $TESTFILE -o $TESTDIR/h5copy_misc1.out.h5 -v -s /simple -d /g1/g2/simple
-
- echo "Test copying objects to the same file "
- TOOLTEST_SAME -i $TESTFILE -o $TESTDIR/samefile1.out.h5 /simple /simple_cp
- TOOLTEST_SAME -i $TESTFILE -o $TESTDIR/samefile2.out.h5 /grp_dsets /grp_dsets_cp
-}
-
-##############################################################################
-### T H E T E S T S ###
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-
-# Start tests
-COPY_OBJECTS
-COPY_REFERENCES
-COPY_EXT_LINKS
-TEST_MISC
-
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-if test $nerrors -eq 0 ; then
- echo "All $TESTNAME tests passed."
- exit $EXIT_SUCCESS
-else
- echo "$TESTNAME tests failed with $nerrors errors."
- exit $EXIT_FAILURE
-fi
generated by cgit v0.12 at 2024-07-20 05:19:22 (GMT)