diff options
Diffstat (limited to 'tools/h5dump/Makefile.in')
| -rw-r--r-- | tools/h5dump/Makefile.in | 798 |
1 files changed, 719 insertions, 79 deletions
diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in index 8083106..ea4b21e 100644 --- a/tools/h5dump/Makefile.in +++ b/tools/h5dump/Makefile.in @@ -1,79 +1,719 @@ -## -## Copyright by the Board of Trustees of the University of Illinois. -## All rights reserved. -## -## This file is part of HDF5. The full HDF5 copyright notice, including -## terms governing use, modification, and redistribution, is contained in -## the files COPYING and Copyright.html. COPYING can be found at the root -## of the source code distribution tree; Copyright.html can be found at the -## root level of an installed copy of the electronic HDF5 document set and -## is linked from the top-level documents page. It can also be found at -## http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have -## access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. -## -## HDF5 Library Makefile(.in) -## -top_srcdir=@top_srcdir@ -top_builddir=../.. -srcdir=@srcdir@ -@COMMENCE@ - -## Add include directory to the C preprocessor flags, add -lh5tools and -## -lhdf5 to the list of libraries. -## -CPPFLAGS=-I. -I$(srcdir) -I$(top_builddir)/src -I$(top_srcdir)/src \ - -I$(top_srcdir)/tools/lib @CPPFLAGS@ - -## Test programs and scripts. -## -TEST_PROGS=h5dumpgentest -TEST_SCRIPTS=./testh5dump.sh $(srcdir)/testh5dumpxml.sh - -## These are our main targets: library and tools. -## -LIBTOOLS=../lib/libh5tools.la -LIBHDF5=$(top_builddir)/src/libhdf5.la - -PUB_PROGS=h5dump -PROGS=$(PUB_PROGS) $(TEST_PROGS) - -## Source and object files for the library; do not install -## -LIB_SRC= -LIB_OBJ=$(LIB_SRC:.c=.lo) -PUB_LIB= - -## Temporary files. *.h5 are generated by h5dumpgentest. They should -## copied to the testfiles/ directory if update is required. -MOSTLYCLEAN=*.h5 -CLEAN= -DISTCLEAN=testh5dump.sh - -## Source and object files for programs... -## -PROG_SRC=h5dump.c h5dumpgentest.c -PROG_OBJ=$(PROG_SRC:.c=.lo) - -PRIVATE_HDR=h5dump.h - -## Source and object files for the tests -## -TEST_SRC= -TEST_OBJ=$(TEST_SRC:.c=.lo) - -## Programs have to be built before they can be tested! -## -check test _test: $(PROGS) - -## How to build the programs...They all depend on the hdf5 library and -## the tools library compiled in this directory. -## -$(PROGS): $(LIBTOOLS) $(LIBHDF5) - -h5dump: h5dump.lo - @$(LT_LINK_EXE) $(CFLAGS) -o $@ h5dump.lo $(LIBTOOLS) $(LIBHDF5) $(LDFLAGS) $(LIBS) - -h5dumpgentest: h5dumpgentest.lo - @$(LT_LINK_EXE) $(CFLAGS) -o $@ h5dumpgentest.lo $(LIBTOOLS) $(LIBHDF5) $(LDFLAGS) $(LIBS) - -@CONCLUDE@ +# Makefile.in generated by automake 1.6.3 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +# +# HDF5 Library Makefile(.in) +# + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/commence' file which was generated with config.status +# from `./config/commence.in'. +#----------------------------------------------------------------------------- + +#------------------------------------------------------------ -*- makefile -*- +# The following section of this makefile comes from the +# `./config/conclude' file which was generated with config.status +# from `./config/conclude.in'. +#----------------------------------------------------------------------------- +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +oldincludedir = /usr/include +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = ../.. + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) +transform = @program_transform_name@ +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_alias = @host_alias@ +host_triplet = @host@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ + +# Install directories that automake doesn't know about +includedir = $(exec_prefix)/include +ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ +AMTAR = @AMTAR@ +AR = @AR@ +AS = @AS@ +AWK = @AWK@ +BUILD_PDB2HDF = @BUILD_PDB2HDF@ +BYTESEX = @BYTESEX@ +CC = @CC@ +CC_VERSION = @CC_VERSION@ +CONFIG_DATE = @CONFIG_DATE@ +CONFIG_MODE = @CONFIG_MODE@ +CONFIG_USER = @CONFIG_USER@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +DEBUG_PKG = @DEBUG_PKG@ +DEFAULT_LIBS = @DEFAULT_LIBS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DYNAMIC_DIRS = @DYNAMIC_DIRS@ +ECHO = @ECHO@ +F77 = @F77@ +F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ +FC = @FC@ +FFLAGS = @FFLAGS@ +FILTERS = @FILTERS@ +FSEARCH_DIRS = @FSEARCH_DIRS@ +GASS = @GASS@ +H5_VERSION = @H5_VERSION@ +HADDR_T = @HADDR_T@ +HDF5_INTERFACES = @HDF5_INTERFACES@ +HID_T = @HID_T@ +HL = @HL@ +HL_FOR = @HL_FOR@ +HSIZET = @HSIZET@ +HSIZE_T = @HSIZE_T@ +HSSIZE_T = @HSSIZE_T@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LT_STATIC_EXEC = @LT_STATIC_EXEC@ +MPE = @MPE@ +OBJDUMP = @OBJDUMP@ +OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ +PACKAGE = @PACKAGE@ +PARALLEL = @PARALLEL@ +PERL = @PERL@ +PTHREAD = @PTHREAD@ +RANLIB = @RANLIB@ +ROOT = @ROOT@ +RUNPARALLEL = @RUNPARALLEL@ +RUNSERIAL = @RUNSERIAL@ +R_INTEGER = @R_INTEGER@ +R_LARGE = @R_LARGE@ +SEARCH = @SEARCH@ +SETX = @SETX@ +SIZE_T = @SIZE_T@ +SRB = @SRB@ +SSL = @SSL@ +STATIC_SHARED = @STATIC_SHARED@ +STRIP = @STRIP@ +TESTGASS = @TESTGASS@ +TESTPARALLEL = @TESTPARALLEL@ +TESTSRB = @TESTSRB@ +TRACE_API = @TRACE_API@ +USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ +USE_FILTER_FLETCHER32 = @USE_FILTER_FLETCHER32@ +USE_FILTER_NBIT = @USE_FILTER_NBIT@ +USE_FILTER_SHUFFLE = @USE_FILTER_SHUFFLE@ +USE_FILTER_SZIP = @USE_FILTER_SZIP@ +VERSION = @VERSION@ +am__include = @am__include@ +am__quote = @am__quote@ +install_sh = @install_sh@ + +# Shell commands used in Makefiles +RM = rm -f +CP = cp + +# Libraries to link to while building +LIBHDF5 = $(top_builddir)/src/libhdf5.la +LIBH5TEST = $(top_builddir)/test/libh5test.la +LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la +LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la +LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la +LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la +LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la +LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la +docdir = $(exec_prefix)/doc + +# Scripts used to build examples +H5CC = $(bindir)/h5cc +H5CC_PP = $(bindir)/h5pcc +H5FC = $(bindir)/h5fc +H5FC_PP = $(bindir)/h5pfc + +# Make sure that these variables are exported to the Makefiles +F9XMODEXT = @F9XMODEXT@ + +# Include files in /src directory and /tools/lib directory +AM_CFLAGS = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib + +# Test programs and scripts +TEST_PROG = h5dumpgentest +TEST_SCRIPT = testh5dump.sh $(top_srcdir)/tools/h5dump/testh5dumpxml.sh + +check_PROGRAMS = $(TEST_PROG) +check_SCRIPTS = $(TEST_SCRIPT) + +# Our main target, the h5dump tool. +bin_PROGRAMS = h5dump + +# All the programs depend on the hdf5 and h5tools libraries +LDADD = $(LIBH5TOOLS) $(LIBHDF5) + +# Temporary files. *.h5 are generated by h5dumpgentest. They should +# copied to the testfiles/ directory if update is required. +MOSTLYCLEANFILES = *.h5 +DISTCLEANFILES = testh5dump.sh + +# Automake needs to be taught how to build lib, progs, and tests targets. +# These will be filled in automatically for the most part (e.g., +# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and +# EXTRA_TEST variables are supplied to allow the user to force targets to +# be built at certain times. +LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ + $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) + +PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ + $(EXTRA_PROG) + +TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +subdir = tools/h5dump +mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/src/H5config.h +CONFIG_CLEAN_FILES = testh5dump.sh +bin_PROGRAMS = h5dump$(EXEEXT) +check_PROGRAMS = h5dumpgentest$(EXEEXT) +PROGRAMS = $(bin_PROGRAMS) + +h5dump_SOURCES = h5dump.c +h5dump_OBJECTS = h5dump.$(OBJEXT) +h5dump_LDADD = $(LDADD) +h5dump_DEPENDENCIES = $(top_builddir)/tools/lib/libh5tools.la \ + $(top_builddir)/src/libhdf5.la +h5dump_LDFLAGS = +h5dumpgentest_SOURCES = h5dumpgentest.c +h5dumpgentest_OBJECTS = h5dumpgentest.$(OBJEXT) +h5dumpgentest_LDADD = $(LDADD) +h5dumpgentest_DEPENDENCIES = $(top_builddir)/tools/lib/libh5tools.la \ + $(top_builddir)/src/libhdf5.la +h5dumpgentest_LDFLAGS = + +DEFS = @DEFS@ +DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/src +LDFLAGS = @LDFLAGS@ +LIBS = @LIBS@ +depcomp = $(SHELL) $(top_srcdir)/bin/depcomp +am__depfiles_maybe = depfiles +@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/h5dump.Po \ +@AMDEP_TRUE@ ./$(DEPDIR)/h5dumpgentest.Po +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ + $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(AM_LDFLAGS) $(LDFLAGS) -o $@ +CFLAGS = @CFLAGS@ +DIST_SOURCES = h5dump.c h5dumpgentest.c +DIST_COMMON = Makefile.am Makefile.in testh5dump.sh.in +SOURCES = h5dump.c h5dumpgentest.c + +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign tools/h5dump/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +testh5dump.sh: $(top_builddir)/config.status testh5dump.sh.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(DESTDIR)$(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ + rm -f $(DESTDIR)$(bindir)/$$f; \ + done + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done + +clean-checkPROGRAMS: + @list='$(check_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done +h5dump$(EXEEXT): $(h5dump_OBJECTS) $(h5dump_DEPENDENCIES) + @rm -f h5dump$(EXEEXT) + $(LINK) $(h5dump_LDFLAGS) $(h5dump_OBJECTS) $(h5dump_LDADD) $(LIBS) +h5dumpgentest$(EXEEXT): $(h5dumpgentest_OBJECTS) $(h5dumpgentest_DEPENDENCIES) + @rm -f h5dumpgentest$(EXEEXT) + $(LINK) $(h5dumpgentest_LDFLAGS) $(h5dumpgentest_OBJECTS) $(h5dumpgentest_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) core *.core + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dumpgentest.Po@am__quote@ + +distclean-depend: + -rm -rf ./$(DEPDIR) + +.c.o: +@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< + +.c.obj: +@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + $(COMPILE) -c `cygpath -w $<` + +.c.lo: +@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +CCDEPMODE = @CCDEPMODE@ + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool +uninstall-info-am: + +ETAGS = etags +ETAGSFLAGS = + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = ../.. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @list='$(DISTFILES)'; for file in $$list; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS) + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(PROGRAMS) all-local + +installdirs: + $(mkinstalldirs) $(DESTDIR)$(bindir) + +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ + clean-libtool mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-compile distclean-depend \ + distclean-generic distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: install-binPROGRAMS + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +uninstall-am: uninstall-binPROGRAMS uninstall-info-am + +.PHONY: GTAGS all all-am all-local check check-TESTS check-am clean \ + clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ + clean-libtool distclean distclean-compile distclean-depend \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-exec install-exec-am \ + install-info install-info-am install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool tags uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-info-am + + +# Let automake worry about Makefiles and configure components being up-to- +# date. +# +# +# The following rules insure that the Makefile is up-to-date by rerunning +# various autoconf components (although not all versions of make assume +# that the makefile is implicitly a target). We use time stamp files to +# keep track of the most recent update of H5config.h.in and H5config.h +# because autoheader and config.status don't update the modification time +# if the contents don't change. +# Invoke it by "gmake reconfigure". +# +# Graphically, the dependencies are: +# +# configure.in +# | | +# +-----------------+ +------------+ +# | | +# stamp1 configure +# (H5config.h.in) | +# | | | +# | +---------------+ +-----------+ +# | | | +# | config.status +# | | +# | +------------------+ +# | | +# stamp2 +# (H5config.h) Makefile.in et al +# | | +# +------------------+ +-----------+ +# | | +# Makefile +# +# A side effect of updating stamp1 is to generate H5config.h.in and a +# side effect of updating stamp2 is to generate H5config.h. When using +# a version of make that doesn't treat the makefile as the initial target +# the user may want to occassionally type `make Makefile' in any source +# directory. +# The `Makefile' target has been renamed to `reconfigure' so that the +# autoconf and make depend processes do not start up automatically. +# One must do `make reconfigure' explicitedly to start the process. +# (When srcdir is used and if more than one machines are running, +# this automatic Makefile/autoconf can get things unstable.) +# +#STAMP1=$(top_builddir)/config/stamp1 +#STAMP2=$(top_builddir)/config/stamp2 + +#MAKEFILE_PARTS=$(srcdir)/Makefile.in \ +# $(top_srcdir)/config/commence.am \ +# $(top_srcdir)/config/conclude.am + +#$(STAMP1): $(top_srcdir)/configure.in +# touch $(STAMP1) +# -cd $(top_srcdir); autoheader + +#$(STAMP2): $(STAMP1) $(top_builddir)/config.status +# touch $(STAMP2) +# -cd $(top_builddir); \ +# CONFIG_FILES= CONFIG_HEADERS=src/H5config.h ./config.status + +# Automake supplies a rule to generate configure + +#$(top_builddir)/config.status: $(top_srcdir)/configure $(STAMP1) +# -cd $(top_builddir); ./config.status --recheck + +# rerun the autoconf process if any configure components have changed. +#reconfigure: $(MAKEFILE_PARTS) $(STAMP2) +# -cd $(top_builddir); CONFIG_HEADERS= ./config.status +# @for sub in @subdirs@ dummy; do \ +# if test $$sub != dummy; then \ +# -cd $$sub; $(MAKE) reconfigure; \ +# fi; \ +# done; + +#----------------------------------------------------------------------------- +# The following section of this makefile comes from the middle of +# `Makefile.am' from this directory. +# It was generated by running automake on `Makefile.am' to create +# `Makefile.in', then running `config.status' to create this Makefile. +#----------------------------------------------------------------------------- + +# lib/progs/tests targets recurse into subdirectories. build-* targets +# build files in this directory. +build-lib: $(LIB) +build-progs: $(LIB) $(PROGS) +build-tests: $(LIB) $(PROGS) $(TESTS) + +lib progs tests :: + @$(MAKE) build-$@ || exit 1; \ + for d in X $(SUBDIRS); do \ + if test $$d != X -a $$d != .; then \ + (set -x; cd $$d && $(MAKE) $@) || exit 1; \ + fi; \ + done + +# Tell Automake to build tests when the user types `make all' (this is +# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since +# Automake won't build them automatically, either. +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) + +# make install-doc doesn't do anything outside of doc directory, but +# Makefiles should recognize it. +install-doc uninstall-doc: + @echo "Nothing to be done." + +# Run each test in order, passing $(TEST_FLAGS) to the program. +# Since tests are done in a shell loop, "make -i" does apply inside it. +# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. +# The timestamps give a rough idea how much time the tests use. +# +# Note that targets in TESTS (defined above) will be built when the user +# types 'make tests' or 'make check', but only programs in TEST_PROG, +# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. +check-TESTS: test + +test _test: $(PROGS) $(TESTS) + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ + fi + @for test in $(TEST_PROG) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNTEST) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG_PARA)"; then \ + echo "**** Hint ****"; \ + echo "Parallel test files reside in the current directory" \ + "by default."; \ + echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ + echo " HDF5_PARAPREFIX=/PFS/user/me"; \ + echo " export HDF5_PARAPREFIX"; \ + echo " make check"; \ + echo "**** end of Hint ****"; \ + fi + @for test in $(TEST_PROG_PARA) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + srcdir="$(srcdir)" \ + $(RUNPARALLEL) ./$$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @for test in $(TEST_SCRIPT) dummy; do \ + if test $$test != dummy; then \ + echo "============================"; \ + if test "X$(HDF_FORTRAN)" = "Xyes"; then \ + echo "Fortran API: Testing $$test $(TEST_FLAGS)"; \ + elif test "X$(HDF_CXX)" = "Xyes"; then \ + echo "C++ API: Testing $$test $(TEST_FLAGS)"; \ + else \ + echo "Testing $$test $(TEST_FLAGS)"; \ + fi; \ + echo "============================"; \ + RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ + srcdir="$(srcdir)" \ + /bin/sh $$test $(TEST_FLAGS) || \ + (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ + break; \ + echo ""; \ + fi; \ + done; \ + test $$test = dummy || false + @if test -n "$(TEST_PROG)$(TEST_PROG_PARA)$(TEST_SCRIPT)"; then \ + echo "===Tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ + fi + +# Run test with different Virtual File Driver +check-vfd: + @for vfd in $(VFD_LIST) dummy; do \ + if test $$vfd != dummy; then \ + echo "============================"; \ + echo "Testing Virtual File Driver $$vfd"; \ + echo "============================"; \ + HDF5_DRIVER=$$vfd $(MAKE) check; \ + fi; \ + done +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |