diff options
Diffstat (limited to 'tools/h5dump/testh5dump.sh.in')
-rw-r--r-- | tools/h5dump/testh5dump.sh.in | 1345 |
1 files changed, 0 insertions, 1345 deletions
diff --git a/tools/h5dump/testh5dump.sh.in b/tools/h5dump/testh5dump.sh.in deleted file mode 100644 index 9108f44..0000000 --- a/tools/h5dump/testh5dump.sh.in +++ /dev/null @@ -1,1345 +0,0 @@ -#! /bin/sh -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. -# -# Tests for the h5dump tool - -srcdir=@srcdir@ - -USE_FILTER_SZIP="@USE_FILTER_SZIP@" -USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" - -TESTNAME=h5dump -EXIT_SUCCESS=0 -EXIT_FAILURE=1 - -DUMPER=h5dump # The tool name -DUMPER_BIN=`pwd`/$DUMPER # The path of the tool binary - -H5DIFF=../h5diff/h5diff # The h5diff tool name -H5DIFF_BIN=`pwd`/$H5DIFF # The path of the h5diff tool binary - -H5IMPORT=../h5import/h5import # The h5import tool name -H5IMPORT_BIN=`pwd`/$H5IMPORT # The path of the h5import tool binary - -RM='rm -rf' -CMP='cmp' -DIFF='diff -c' -CP='cp' -DIRNAME='dirname' -LS='ls' -AWK='awk' - -# Skip plugin module to test missing filter -ENVCMD="env HDF5_PLUGIN_PRELOAD=::" - -nerrors=0 -verbose=yes - -# source dirs -SRC_TOOLS="$srcdir/../" - -SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" -# testfiles source dirs for tools -SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES" -SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES" -SRC_H5DUMP_ERRORFILES="$srcdir/errfiles" -SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles" -SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles" -SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles" -SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles" -SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles" -SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles" - -TEST_P_DIR=./testfiles -TESTDIR=./testfiles/std -test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR -test -d $TESTDIR || mkdir -p $TESTDIR - -###################################################################### -# test files -# -------------------------------------------------------------------- -# All the test files copy from source directory to test directory -# NOTE: Keep this framework to add/remove test files. -# Any test files from other tools can be used in this framework. -# This list are also used for checking exist. -# Comment '#' without space can be used. -# -------------------------------------------------------------------- -LIST_HDF5_TEST_FILES=" -$SRC_H5DUMP_TESTFILES/charsets.h5 -$SRC_H5DUMP_TESTFILES/file_space.h5 -$SRC_H5DUMP_TESTFILES/filter_fail.h5 -$SRC_H5DUMP_TESTFILES/packedbits.h5 -$SRC_H5DUMP_TESTFILES/taindices.h5 -$SRC_H5DUMP_TESTFILES/tall.h5 -$SRC_H5DUMP_TESTFILES/tarray1.h5 -$SRC_H5DUMP_TESTFILES/tarray1_big.h5 -$SRC_H5DUMP_TESTFILES/tarray2.h5 -$SRC_H5DUMP_TESTFILES/tarray3.h5 -$SRC_H5DUMP_TESTFILES/tarray4.h5 -$SRC_H5DUMP_TESTFILES/tarray5.h5 -$SRC_H5DUMP_TESTFILES/tarray6.h5 -$SRC_H5DUMP_TESTFILES/tarray7.h5 -$SRC_H5DUMP_TESTFILES/tarray8.h5 -$SRC_H5DUMP_TESTFILES/tattr.h5 -$SRC_H5DUMP_TESTFILES/tattr2.h5 -$SRC_H5DUMP_TESTFILES/tattr4_be.h5 -$SRC_H5DUMP_TESTFILES/tattrintsize.h5 -$SRC_H5DUMP_TESTFILES/tattrreg.h5 -$SRC_H5DUMP_TESTFILES/tbigdims.h5 -$SRC_H5DUMP_TESTFILES/tbinary.h5 -$SRC_H5DUMP_TESTFILES/tchar.h5 -$SRC_H5DUMP_TESTFILES/tcmpdattrintsize.h5 -$SRC_H5DUMP_TESTFILES/tcmpdintsize.h5 -$SRC_H5DUMP_TESTFILES/tcompound.h5 -$SRC_H5DUMP_TESTFILES/tcompound_complex.h5 -$SRC_H5DUMP_TESTFILES/tcompound_complex2.h5 -$SRC_H5DUMP_TESTFILES/tdatareg.h5 -$SRC_H5DUMP_TESTFILES/tdset.h5 -$SRC_H5DUMP_TESTFILES/tempty.h5 -$SRC_H5DUMP_TESTFILES/tsoftlinks.h5 -$SRC_H5DUMP_TESTFILES/textlinkfar.h5 -$SRC_H5DUMP_TESTFILES/textlinksrc.h5 -$SRC_H5DUMP_TESTFILES/textlinktar.h5 -$SRC_H5DUMP_TESTFILES/textlink.h5 -$SRC_H5DUMP_TESTFILES/tfamily00000.h5 -$SRC_H5DUMP_TESTFILES/tfamily00001.h5 -$SRC_H5DUMP_TESTFILES/tfamily00002.h5 -$SRC_H5DUMP_TESTFILES/tfamily00003.h5 -$SRC_H5DUMP_TESTFILES/tfamily00004.h5 -$SRC_H5DUMP_TESTFILES/tfamily00005.h5 -$SRC_H5DUMP_TESTFILES/tfamily00006.h5 -$SRC_H5DUMP_TESTFILES/tfamily00007.h5 -$SRC_H5DUMP_TESTFILES/tfamily00008.h5 -$SRC_H5DUMP_TESTFILES/tfamily00009.h5 -$SRC_H5DUMP_TESTFILES/tfamily00010.h5 -$SRC_H5DUMP_TESTFILES/tfcontents1.h5 -$SRC_H5DUMP_TESTFILES/tfcontents2.h5 -$SRC_H5DUMP_TESTFILES/tfilters.h5 -$SRC_H5DUMP_TESTFILES/tfpformat.h5 -$SRC_H5DUMP_TESTFILES/tfvalues.h5 -$SRC_H5DUMP_TESTFILES/tgroup.h5 -$SRC_H5DUMP_TESTFILES/tgrp_comments.h5 -$SRC_H5DUMP_TESTFILES/thlink.h5 -$SRC_H5DUMP_TESTFILES/thyperslab.h5 -$SRC_H5DUMP_TESTFILES/tintsattrs.h5 -$SRC_H5DUMP_TESTFILES/tints4dims.h5 -$SRC_H5DUMP_TESTFILES/tlarge_objname.h5 -#$SRC_H5DUMP_TESTFILES/tldouble.h5 -$SRC_H5DUMP_TESTFILES/tlonglinks.h5 -$SRC_H5DUMP_TESTFILES/tloop.h5 -$SRC_H5DUMP_TESTFILES/tmulti-b.h5 -$SRC_H5DUMP_TESTFILES/tmulti-g.h5 -$SRC_H5DUMP_TESTFILES/tmulti-l.h5 -$SRC_H5DUMP_TESTFILES/tmulti-o.h5 -$SRC_H5DUMP_TESTFILES/tmulti-r.h5 -$SRC_H5DUMP_TESTFILES/tmulti-s.h5 -$SRC_H5DUMP_TESTFILES/tnamed_dtype_attr.h5 -$SRC_H5DUMP_TESTFILES/tnestedcomp.h5 -$SRC_H5DUMP_TESTFILES/tnestedcmpddt.h5 -$SRC_H5DUMP_TESTFILES/tno-subset.h5 -$SRC_H5DUMP_TESTFILES/tnullspace.h5 -$SRC_H5DUMP_TESTFILES/zerodim.h5 -$SRC_H5DUMP_TESTFILES/torderattr.h5 -$SRC_H5DUMP_TESTFILES/tordergr.h5 -$SRC_H5DUMP_TESTFILES/tsaf.h5 -$SRC_H5DUMP_TESTFILES/tscalarattrintsize.h5 -$SRC_H5DUMP_TESTFILES/tscalarintattrsize.h5 -$SRC_H5DUMP_TESTFILES/tscalarintsize.h5 -$SRC_H5DUMP_TESTFILES/tscalarstring.h5 -$SRC_H5DUMP_TESTFILES/tslink.h5 -$SRC_H5DUMP_TESTFILES/tsplit_file-m.h5 -$SRC_H5DUMP_TESTFILES/tsplit_file-r.h5 -$SRC_H5DUMP_TESTFILES/tstr.h5 -$SRC_H5DUMP_TESTFILES/tstr2.h5 -$SRC_H5DUMP_TESTFILES/tstr3.h5 -$SRC_H5DUMP_TESTFILES/tudlink.h5 -$SRC_H5DUMP_TESTFILES/tvldtypes1.h5 -$SRC_H5DUMP_TESTFILES/tvldtypes2.h5 -$SRC_H5DUMP_TESTFILES/tvldtypes3.h5 -$SRC_H5DUMP_TESTFILES/tvldtypes4.h5 -$SRC_H5DUMP_TESTFILES/tvldtypes5.h5 -$SRC_H5DUMP_TESTFILES/tvlenstr_array.h5 -$SRC_H5DUMP_TESTFILES/tvlstr.h5 -$SRC_H5DUMP_TESTFILES/tvms.h5 -" - -LIST_OTHER_TEST_FILES=" -$SRC_H5DUMP_TESTFILES/charsets.ddl -$SRC_H5DUMP_TESTFILES/file_space.ddl -$SRC_H5DUMP_TESTFILES/filter_fail.ddl -$SRC_H5DUMP_TESTFILES/non_existing.ddl -$SRC_H5DUMP_TESTFILES/packedbits.ddl -$SRC_H5DUMP_TESTFILES/tall-1.ddl -$SRC_H5DUMP_TESTFILES/tall-2.ddl -$SRC_H5DUMP_TESTFILES/tall-2A.ddl -$SRC_H5DUMP_TESTFILES/tall-2A0.ddl -$SRC_H5DUMP_TESTFILES/tall-2B.ddl -$SRC_H5DUMP_TESTFILES/tall-3.ddl -$SRC_H5DUMP_TESTFILES/tall-4s.ddl -$SRC_H5DUMP_TESTFILES/tall-5s.ddl -$SRC_H5DUMP_TESTFILES/tall-6.ddl -$SRC_H5DUMP_TESTFILES/tall-6.exp -$SRC_H5DUMP_TESTFILES/tall-7.ddl -$SRC_H5DUMP_TESTFILES/tall-7N.ddl -$SRC_H5DUMP_TESTFILES/tallfilters.ddl -$SRC_H5DUMP_TESTFILES/tarray1.ddl -$SRC_H5DUMP_TESTFILES/tarray1_big.ddl -$SRC_H5DUMP_TESTFILES/tarray2.ddl -$SRC_H5DUMP_TESTFILES/tarray3.ddl -$SRC_H5DUMP_TESTFILES/tarray4.ddl -$SRC_H5DUMP_TESTFILES/tarray5.ddl -$SRC_H5DUMP_TESTFILES/tarray6.ddl -$SRC_H5DUMP_TESTFILES/tarray7.ddl -$SRC_H5DUMP_TESTFILES/tarray8.ddl -$SRC_H5DUMP_TESTFILES/tattr-1.ddl -$SRC_H5DUMP_TESTFILES/tattr-2.ddl -$SRC_H5DUMP_TESTFILES/tattr-3.ddl -$SRC_H5DUMP_TESTFILES/tattr-4_be.ddl -$SRC_H5DUMP_TESTFILES/tattrcontents1.ddl -$SRC_H5DUMP_TESTFILES/tattrcontents2.ddl -$SRC_H5DUMP_TESTFILES/tattrintsize.ddl -$SRC_H5DUMP_TESTFILES/tattrreg.ddl -$SRC_H5DUMP_TESTFILES/tattrregR.ddl -$SRC_H5DUMP_TESTFILES/tbin1.ddl -$SRC_H5DUMP_TESTFILES/tbin1.ddl -$SRC_H5DUMP_TESTFILES/tbin2.ddl -$SRC_H5DUMP_TESTFILES/tbin3.ddl -$SRC_H5DUMP_TESTFILES/tbin4.ddl -$SRC_H5DUMP_TESTFILES/tbinregR.ddl -$SRC_H5DUMP_TESTFILES/tbigdims.ddl -$SRC_H5DUMP_TESTFILES/tboot1.ddl -$SRC_H5DUMP_TESTFILES/tboot2.ddl -$SRC_H5DUMP_TESTFILES/tboot2A.ddl -$SRC_H5DUMP_TESTFILES/tboot2B.ddl -$SRC_H5DUMP_TESTFILES/tchar1.ddl -$SRC_H5DUMP_TESTFILES/tchunked.ddl -$SRC_H5DUMP_TESTFILES/tcmpdattrintsize.ddl -$SRC_H5DUMP_TESTFILES/tcmpdintsize.ddl -$SRC_H5DUMP_TESTFILES/tcomp-1.ddl -$SRC_H5DUMP_TESTFILES/tcomp-2.ddl -$SRC_H5DUMP_TESTFILES/tcomp-3.ddl -$SRC_H5DUMP_TESTFILES/tcomp-4.ddl -$SRC_H5DUMP_TESTFILES/tcompound_complex2.ddl -$SRC_H5DUMP_TESTFILES/tcompact.ddl -$SRC_H5DUMP_TESTFILES/tcontents.ddl -$SRC_H5DUMP_TESTFILES/tcontiguos.ddl -$SRC_H5DUMP_TESTFILES/tdatareg.ddl -$SRC_H5DUMP_TESTFILES/tdataregR.ddl -$SRC_H5DUMP_TESTFILES/tdeflate.ddl -$SRC_H5DUMP_TESTFILES/tdset-1.ddl -$SRC_H5DUMP_TESTFILES/tdset-2.ddl -$SRC_H5DUMP_TESTFILES/tdset-3s.ddl -$SRC_H5DUMP_TESTFILES/tempty.ddl -$SRC_H5DUMP_TESTFILES/texceedsubstart.ddl -$SRC_H5DUMP_TESTFILES/texceedsubcount.ddl -$SRC_H5DUMP_TESTFILES/texceedsubstride.ddl -$SRC_H5DUMP_TESTFILES/texceedsubblock.ddl -$SRC_H5DUMP_TESTFILES/texternal.ddl -$SRC_H5DUMP_TESTFILES/textlinksrc.ddl -$SRC_H5DUMP_TESTFILES/textlinkfar.ddl -$SRC_H5DUMP_TESTFILES/textlink.ddl -$SRC_H5DUMP_TESTFILES/tfamily.ddl -$SRC_H5DUMP_TESTFILES/tfill.ddl -$SRC_H5DUMP_TESTFILES/tfletcher32.ddl -$SRC_H5DUMP_TESTFILES/tfpformat.ddl -$SRC_H5DUMP_TESTFILES/tgroup-1.ddl -$SRC_H5DUMP_TESTFILES/tgroup-2.ddl -$SRC_H5DUMP_TESTFILES/tgrp_comments.ddl -$SRC_H5DUMP_TESTFILES/thlink-1.ddl -$SRC_H5DUMP_TESTFILES/thlink-2.ddl -$SRC_H5DUMP_TESTFILES/thlink-3.ddl -$SRC_H5DUMP_TESTFILES/thlink-4.ddl -$SRC_H5DUMP_TESTFILES/thlink-5.ddl -$SRC_H5DUMP_TESTFILES/thyperslab.ddl -$SRC_H5DUMP_TESTFILES/tindicesno.ddl -$SRC_H5DUMP_TESTFILES/tindicessub1.ddl -$SRC_H5DUMP_TESTFILES/tindicessub2.ddl -$SRC_H5DUMP_TESTFILES/tindicessub3.ddl -$SRC_H5DUMP_TESTFILES/tindicessub4.ddl -$SRC_H5DUMP_TESTFILES/tindicesyes.ddl -$SRC_H5DUMP_TESTFILES/tints4dims.ddl -$SRC_H5DUMP_TESTFILES/tints4dimsBlock2.ddl -$SRC_H5DUMP_TESTFILES/tints4dimsBlockEq.ddl -$SRC_H5DUMP_TESTFILES/tints4dimsCount2.ddl -$SRC_H5DUMP_TESTFILES/tints4dimsCountEq.ddl -$SRC_H5DUMP_TESTFILES/tints4dimsStride2.ddl -$SRC_H5DUMP_TESTFILES/tintsattrs.ddl -$SRC_H5DUMP_TESTFILES/tlarge_objname.ddl -#$SRC_H5DUMP_TESTFILES/tldouble.ddl -$SRC_H5DUMP_TESTFILES/tlonglinks.ddl -$SRC_H5DUMP_TESTFILES/tloop-1.ddl -$SRC_H5DUMP_TESTFILES/tmulti.ddl -$SRC_H5DUMP_TESTFILES/tmultifile.ddl -$SRC_H5DUMP_TESTFILES/tqmarkfile.ddl -$SRC_H5DUMP_TESTFILES/tstarfile.ddl -$SRC_H5DUMP_TESTFILES/tnamed_dtype_attr.ddl -$SRC_H5DUMP_TESTFILES/tnestcomp-1.ddl -$SRC_H5DUMP_TESTFILES/tnestedcmpddt.ddl -$SRC_H5DUMP_TESTFILES/tnbit.ddl -$SRC_H5DUMP_TESTFILES/tnoattrdata.ddl -$SRC_H5DUMP_TESTFILES/tnoattrddl.ddl -$SRC_H5DUMP_TESTFILES/tnodata.ddl -$SRC_H5DUMP_TESTFILES/tnoddl.ddl -$SRC_H5DUMP_TESTFILES/tnoddlfile.ddl -$SRC_H5DUMP_TESTFILES/tnoddlfile.exp -$SRC_H5DUMP_TESTFILES/tno-subset.ddl -$SRC_H5DUMP_TESTFILES/tnullspace.ddl -$SRC_H5DUMP_TESTFILES/trawdatafile.ddl -$SRC_H5DUMP_TESTFILES/trawdatafile.exp -$SRC_H5DUMP_TESTFILES/trawssetfile.ddl -$SRC_H5DUMP_TESTFILES/trawssetfile.exp -$SRC_H5DUMP_TESTFILES/zerodim.ddl -$SRC_H5DUMP_TESTFILES/tordergr1.ddl -$SRC_H5DUMP_TESTFILES/tordergr2.ddl -$SRC_H5DUMP_TESTFILES/tordergr3.ddl -$SRC_H5DUMP_TESTFILES/tordergr4.ddl -$SRC_H5DUMP_TESTFILES/tordergr5.ddl -$SRC_H5DUMP_TESTFILES/torderattr1.ddl -$SRC_H5DUMP_TESTFILES/torderattr2.ddl -$SRC_H5DUMP_TESTFILES/torderattr3.ddl -$SRC_H5DUMP_TESTFILES/torderattr4.ddl -$SRC_H5DUMP_TESTFILES/tordercontents1.ddl -$SRC_H5DUMP_TESTFILES/tordercontents2.ddl -$SRC_H5DUMP_TESTFILES/torderlinks1.ddl -$SRC_H5DUMP_TESTFILES/torderlinks2.ddl -$SRC_H5DUMP_TESTFILES/tperror.ddl -$SRC_H5DUMP_TESTFILES/treadfilter.ddl -$SRC_H5DUMP_TESTFILES/treadintfilter.ddl -$SRC_H5DUMP_TESTFILES/treference.ddl -$SRC_H5DUMP_TESTFILES/tsaf.ddl -$SRC_H5DUMP_TESTFILES/tscalarattrintsize.ddl -$SRC_H5DUMP_TESTFILES/tscalarintattrsize.ddl -$SRC_H5DUMP_TESTFILES/tscalarintsize.ddl -$SRC_H5DUMP_TESTFILES/tscalarstring.ddl -$SRC_H5DUMP_TESTFILES/tscaleoffset.ddl -$SRC_H5DUMP_TESTFILES/tshuffle.ddl -$SRC_H5DUMP_TESTFILES/tslink-1.ddl -$SRC_H5DUMP_TESTFILES/tslink-2.ddl -$SRC_H5DUMP_TESTFILES/tslink-D.ddl -$SRC_H5DUMP_TESTFILES/tsplit_file.ddl -$SRC_H5DUMP_TESTFILES/tstr-1.ddl -$SRC_H5DUMP_TESTFILES/tstr-2.ddl -$SRC_H5DUMP_TESTFILES/tstr2bin2.exp -$SRC_H5DUMP_TESTFILES/tstr2bin6.exp -$SRC_H5DUMP_TESTFILES/tstring.ddl -$SRC_H5DUMP_TESTFILES/tstring2.ddl -$SRC_H5DUMP_TESTFILES/tstringe.ddl -$SRC_H5DUMP_TESTFILES/tszip.ddl -$SRC_H5DUMP_TESTFILES/tudlink-1.ddl -$SRC_H5DUMP_TESTFILES/tudlink-2.ddl -$SRC_H5DUMP_TESTFILES/tuserfilter.ddl -$SRC_H5DUMP_TESTFILES/tvldtypes1.ddl -$SRC_H5DUMP_TESTFILES/tvldtypes2.ddl -$SRC_H5DUMP_TESTFILES/tvldtypes3.ddl -$SRC_H5DUMP_TESTFILES/tvldtypes4.ddl -$SRC_H5DUMP_TESTFILES/tvldtypes5.ddl -$SRC_H5DUMP_TESTFILES/tvlenstr_array.ddl -$SRC_H5DUMP_TESTFILES/tvlstr.ddl -$SRC_H5DUMP_TESTFILES/tvms.ddl -$SRC_H5DUMP_TESTFILES/twidedisplay.ddl -$SRC_H5DUMP_TESTFILES/twithddl.exp -$SRC_H5DUMP_TESTFILES/twithddlfile.ddl -$SRC_H5DUMP_TESTFILES/twithddlfile.exp -$SRC_H5DUMP_TESTFILES/h5dump-help.txt -$SRC_H5DUMP_TESTFILES/out3.h5import -$SRC_H5DUMP_TESTFILES/tbinregR.exp -" - -LIST_ERROR_TEST_FILES=" -${SRC_H5DUMP_ERRORFILES}/filter_fail.err -${SRC_H5DUMP_ERRORFILES}/non_existing.err -${SRC_H5DUMP_ERRORFILES}/tall-1.err -${SRC_H5DUMP_ERRORFILES}/tall-2A.err -${SRC_H5DUMP_ERRORFILES}/tall-2A0.err -${SRC_H5DUMP_ERRORFILES}/tall-2B.err -${SRC_H5DUMP_ERRORFILES}/tarray1_big.err -${SRC_H5DUMP_ERRORFILES}/tattr-3.err -${SRC_H5DUMP_ERRORFILES}/tattrregR.err -${SRC_H5DUMP_ERRORFILES}/tcomp-3.err -${SRC_H5DUMP_ERRORFILES}/tdataregR.err -${SRC_H5DUMP_ERRORFILES}/tdset-2.err -${SRC_H5DUMP_ERRORFILES}/texceedsubblock.err -${SRC_H5DUMP_ERRORFILES}/texceedsubcount.err -${SRC_H5DUMP_ERRORFILES}/texceedsubstart.err -${SRC_H5DUMP_ERRORFILES}/texceedsubstride.err -${SRC_H5DUMP_ERRORFILES}/textlink.err -${SRC_H5DUMP_ERRORFILES}/textlinkfar.err -${SRC_H5DUMP_ERRORFILES}/textlinksrc.err -${SRC_H5DUMP_ERRORFILES}/tgroup-2.err -${SRC_H5DUMP_ERRORFILES}/torderlinks1.err -${SRC_H5DUMP_ERRORFILES}/torderlinks2.err -${SRC_H5DUMP_ERRORFILES}/tperror.err -${SRC_H5DUMP_ERRORFILES}/tqmarkfile.err -${SRC_H5DUMP_ERRORFILES}/tslink-D.err -" - -# -# copy test files and expected output files from source dirs to test dir -# -COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_ERROR_TEST_FILES" - -COPY_TESTFILES_TO_TESTDIR() -{ - # copy test files. Used -f to make sure get a new copy - for tstfile in $COPY_TESTFILES - do - # ignore '#' comment - echo $tstfile | tr -d ' ' | grep '^#' > /dev/null - RET=$? - if [ $RET -eq 1 ]; then - # skip cp if srcdir is same as destdir - # this occurs when build/test performed in source dir and - # make cp fail - SDIR=`$DIRNAME $tstfile` - INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` - INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` - if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then - $CP -f $tstfile $TESTDIR - if [ $? -ne 0 ]; then - echo "Error: FAILED to copy $tstfile ." - - # Comment out this to CREATE expected file - exit $EXIT_FAILURE - fi - fi - fi - done -} - -CLEAN_TESTFILES_AND_TESTDIR() -{ - # skip rm if srcdir is same as destdir - # this occurs when build/test performed in source dir and - # make cp fail - SDIR=$SRC_H5DUMP_TESTFILES - INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` - INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` - if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then - $RM $TESTDIR - fi -} - -# Print a line-line message left justified in a field of 70 characters -# beginning with the word "Testing". -# -TESTING() { - SPACES=" " - echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012' -} - -# Source in the output filter function definitions. -. $srcdir/../../bin/output_filter.sh - -# Run a test and print PASS or *FAIL*. If a test fails then increment -# the `nerrors' global variable and (if $verbose is set) display the -# difference between the actual output and the expected output. The -# expected output is given as the first argument to this function and -# the actual output file is calculated by replacing the `.ddl' with -# `.out'. The actual output is not removed if $HDF5_NOCLEANUP has a -# non-zero value. -# If $1 == ignorecase then do caseless CMP and DIFF. -# ADD_H5_TEST -TOOLTEST() { - # check if caseless compare and diff requested - if [ "$1" = ignorecase ]; then - caseless="-i" - # replace cmp with diff which runs much longer. - xCMP="$DIFF -i" - shift - else - caseless="" - # stick with faster cmp if ignorecase is not requested. - xCMP="$CMP" - fi - - expect="$TESTDIR/$1" - actual="$TESTDIR/`basename $1 .ddl`.out" - actual_err="$TESTDIR/`basename $1 .ddl`.err" - actual_sav=${actual}-sav - actual_err_sav=${actual_err}-sav - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - - # save actual and actual_err in case they are needed later. - cp $actual $actual_sav - STDOUT_FILTER $actual - cp $actual_err $actual_err_sav - STDERR_FILTER $actual_err - cat $actual_err >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $xCMP $expect $actual > /dev/null 2>&1 ; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $caseless $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext - fi - -} - - -# same as TOOLTEST1 but compares generated file to expected output -# and compares the generated data file to the expected data file -# used for the binary tests that expect a full path in -o without -b -# ADD_H5_EXPORT_TEST -TOOLTEST2() { - - expectdata="$TESTDIR/$1" - expect="$TESTDIR/`basename $1 .exp`.ddl" - actualdata="$TESTDIR/`basename $1 .exp`.txt" - actual="$TESTDIR/`basename $1 .exp`.out" - actual_err="$TESTDIR/`basename $1 .exp`.err" - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - cat $actual_err >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - if [ ! -f $expectdata ]; then - # Create the expect data file if it doesn't yet exist. - echo " CREATED" - cp $actualdata $expectdata - elif $CMP $expectdata $actualdata; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected datafile (*.exp) differs from actual datafile (*.txt)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/ /' - fi - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actualdata $actual_err - fi - -} - -# same as TOOLTEST2 but compares generated file to expected ddl file -# and compares the generated data file to the expected data file -# used for the binary tests that expect a full path in -o without -b -# ADD_H5_TEST_EXPORT -TOOLTEST2A() { - - expectdata="$TESTDIR/$1" - expect="$TESTDIR/`basename $1 .exp`.ddl" - actualdata="$TESTDIR/`basename $1 .exp`.txt" - actual="$TESTDIR/`basename $1 .exp`.out" - actual_err="$TESTDIR/`basename $1 .exp`.err" - shift - expectmeta="$TESTDIR/$1" - actualmeta="$TESTDIR/`basename $1 .exp`.txt" - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - cat $actual_err >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - if [ ! -f $expectdata ]; then - # Create the expect data file if it doesn't yet exist. - echo " CREATED" - cp $actualdata $expectdata - elif $DIFF $expectdata $actualdata; then - if [ ! -f $expectmeta ]; then - # Create the expect meta file if it doesn't yet exist. - echo " CREATED" - cp $actualmeta $expectmeta - elif $CMP $expectmeta $actualmeta; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected metafile (*.ddl) differs from actual metafile (*.txt)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expectmeta $actualmeta |sed 's/^/ /' - fi - else - echo "*FAILED*" - echo " Expected datafile (*.exp) differs from actual datafile (*.txt)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/ /' - fi - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actualdata $actual_err $actualmeta - fi - -} - -# same as TOOLTEST2 but only compares the generated data file to the expected data file -# used for the binary tests that expect a full path in -o with -b -# ADD_H5_EXPORT_TEST -TOOLTEST2B() { - - expectdata="$TESTDIR/$1" - actualdata="$TESTDIR/`basename $1 .exp`.txt" - actual="$TESTDIR/`basename $1 .exp`.out" - actual_err="$TESTDIR/`basename $1 .exp`.err" - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - cat $actual_err >> $actual - - if [ ! -f $expectdata ]; then - # Create the expect data file if it doesn't yet exist. - echo " CREATED" - cp $actualdata $expectdata - elif $CMP $expectdata $actualdata; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected datafile (*.exp) differs from actual datafile (*.txt)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actualdata $actual_err - fi - -} - -# same as TOOLTEST but filters error stack outp -# Extract file name, line number, version and thread IDs because they may be different -TOOLTEST3() { - - expect="$TESTDIR/$1" - actual="$TESTDIR/`basename $1 .ddl`.out" - actual_err="$TESTDIR/`basename $1 .ddl`.err" - actual_ext="$TESTDIR/`basename $1 .ddl`.ext" - actual_sav=${actual}-sav - actual_err_sav=${actual_err}-sav - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - - # save actual and actual_err in case they are needed later. - cp $actual $actual_sav - STDOUT_FILTER $actual - cp $actual_err $actual_err_sav - STDERR_FILTER $actual_err - - # Extract file name, line number, version and thread IDs because they may be different - sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \ - -e 's/line [0-9]*/line (number)/' \ - -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \ - -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \ - -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \ - -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \ - $actual_err > $actual_ext - cat $actual_ext >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err $actual_sav $actual_err_sav - fi - -} - -# same as TOOLTEST3 but filters error stack output and compares to an error file -# Extract file name, line number, version and thread IDs because they may be different -# ADD_H5ERR_MASK_TEST -TOOLTEST4() { - - expect="$TESTDIR/$1" - expect_err="$TESTDIR/`basename $1 .ddl`.err" - actual="$TESTDIR/`basename $1 .ddl`.out" - actual_err="$TESTDIR/`basename $1 .ddl`.oerr" - actual_ext="$TESTDIR/`basename $1 .ddl`.ext" - actual_sav=${actual}-sav - actual_err_sav=${actual_err}-sav - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - - # save actual and actual_err in case they are needed later. - cp $actual $actual_sav - STDOUT_FILTER $actual - cp $actual_err $actual_err_sav - STDERR_FILTER $actual_err - - # Extract file name, line number, version and thread IDs because they may be different - sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \ - -e 's/line [0-9]*/line (number)/' \ - -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \ - -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \ - -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \ - -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \ - $actual_err > $actual_ext - #cat $actual_ext >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - if $CMP $expect_err $actual_ext; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.err) differs from actual result (*.oerr)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/ /' - fi - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err $actual_sav $actual_err_sav - fi - -} - -# same as TOOLTEST4 but disables plugin filter loading -# silences extra error output on some platforms -# ADD_H5ERR_MASK_TEST -TOOLTEST5() { - - expect="$TESTDIR/$1" - expect_err="$TESTDIR/`basename $1 .ddl`.err" - actual="$TESTDIR/`basename $1 .ddl`.out" - actual_err="$TESTDIR/`basename $1 .ddl`.oerr" - actual_ext="$TESTDIR/`basename $1 .ddl`.ext" - actual_sav=${actual}-sav - actual_err_sav=${actual_err}-sav - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $ENVCMD $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - - # save actual and actual_err in case they are needed later. - cp $actual $actual_sav - STDOUT_FILTER $actual - cp $actual_err $actual_err_sav - STDERR_FILTER $actual_err - - # Extract file name, line number, version and thread IDs because they may be different - sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \ - -e 's/line [0-9]*/line (number)/' \ - -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \ - -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \ - -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \ - -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \ - $actual_err > $actual_ext - #cat $actual_ext >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - if $CMP $expect_err $actual_ext; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.err) differs from actual result (*.oerr)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/ /' - fi - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err $actual_sav $actual_err_sav - fi - -} -# ADD_HELP_TEST -TOOLTEST_HELP() { - - expect="$TESTDIR/$1" - actual="$TESTDIR/`basename $1 .txt`.out" - actual_err="$TESTDIR/`basename $1 .txt`.err" - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - cat $actual_err >> $actual - - if [ ! -f $expectdata ]; then - # Create the expect data file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect-CREATED - elif $CMP $expect $actual; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected output (*.txt) differs from actual output (*.out)" - nerrors="`expr $nerrors + 1`" - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err - fi - -} - -# Print a "SKIP" message -SKIP() { - TESTING $DUMPER $@ - echo " -SKIP-" -} - -# Print a line-line message left justified in a field of 70 characters -# -PRINT_H5DIFF() { - SPACES=" " - echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012' -} - - -# Call the h5diff tool -# -DIFFTEST() -{ - PRINT_H5DIFF $@ - ( - cd $TESTDIR - $RUNSERIAL $H5DIFF_BIN "$@" -q - ) - RET=$? - if [ $RET != 0 ] ; then - echo "*FAILED*" - nerrors="`expr $nerrors + 1`" - else - echo " PASSED" - fi - -} - -# Print a line-line message left justified in a field of 70 characters -# beginning with the word "Verifying". -# -PRINT_H5IMPORT() { - SPACES=" " - echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012' -} - -# Call the h5import tool -# -IMPORTTEST() -{ - # remove the output hdf5 file if it exists - hdf5_file="$TESTDIR/$5" - if [ -f $hdf5_file ]; then - rm -f $hdf5_file - fi - - PRINT_H5IMPORT $@ - ( - cd $TESTDIR - $RUNSERIAL $H5IMPORT_BIN "$@" - ) - RET=$? - if [ $RET != 0 ] ; then - echo "*FAILED*" - nerrors="`expr $nerrors + 1`" - else - echo " PASSED" - fi - -} - - -############################################################################## -############################################################################## -### T H E T E S T S ### -############################################################################## -############################################################################## -# prepare for test -COPY_TESTFILES_TO_TESTDIR - -TOOLTEST_HELP h5dump-help.txt -h - -# test data output redirection -TOOLTEST tnoddl.ddl --enable-error-stack --ddl -y packedbits.h5 -TOOLTEST tnodata.ddl --enable-error-stack --output packedbits.h5 -TOOLTEST tnoattrddl.ddl --enable-error-stack -O -y tattr.h5 -TOOLTEST tnoattrdata.ddl --enable-error-stack -A -o tattr.h5 -TOOLTEST2 trawdatafile.exp --enable-error-stack -y -o trawdatafile.txt packedbits.h5 -TOOLTEST2 tnoddlfile.exp --enable-error-stack -O -y -o tnoddlfile.txt packedbits.h5 -TOOLTEST2A twithddlfile.exp twithddl.exp --enable-error-stack --ddl=twithddl.txt -y -o twithddlfile.txt packedbits.h5 -TOOLTEST2 trawssetfile.exp --enable-error-stack -d "/dset1[1,1;;;]" -y -o trawssetfile.txt tdset.h5 - -# test for maximum display datasets -TOOLTEST twidedisplay.ddl --enable-error-stack -w0 packedbits.h5 - -# test for signed/unsigned datasets -TOOLTEST packedbits.ddl --enable-error-stack packedbits.h5 -# test for compound signed/unsigned datasets -TOOLTEST tcmpdintsize.ddl --enable-error-stack tcmpdintsize.h5 -# test for signed/unsigned scalar datasets -TOOLTEST tscalarintsize.ddl --enable-error-stack tscalarintsize.h5 -# test for signed/unsigned attributes -TOOLTEST tattrintsize.ddl --enable-error-stack tattrintsize.h5 -# test for compound signed/unsigned attributes -TOOLTEST tcmpdattrintsize.ddl --enable-error-stack tcmpdattrintsize.h5 -# test for signed/unsigned scalar attributes -TOOLTEST tscalarattrintsize.ddl --enable-error-stack tscalarattrintsize.h5 -# test for signed/unsigned scalar datasets with attributes -TOOLTEST tscalarintattrsize.ddl --enable-error-stack tscalarintattrsize.h5 -# test for signed/unsigned datasets attributes -TOOLTEST tintsattrs.ddl --enable-error-stack tintsattrs.h5 -# test for string scalar dataset attribute -TOOLTEST tscalarstring.ddl --enable-error-stack tscalarstring.h5 -# test for displaying groups -TOOLTEST tgroup-1.ddl --enable-error-stack tgroup.h5 -# test for displaying the selected groups -TOOLTEST4 tgroup-2.ddl --enable-error-stack --group=/g2 --group / -g /y tgroup.h5 - -# test for displaying simple space datasets -TOOLTEST tdset-1.ddl --enable-error-stack tdset.h5 -# test for displaying selected datasets -TOOLTEST4 tdset-2.ddl --enable-error-stack -H -d dset1 -d /dset2 --dataset=dset3 tdset.h5 - -# test for displaying attributes -TOOLTEST tattr-1.ddl --enable-error-stack tattr.h5 -# test for displaying the selected attributes of string type and scalar space -TOOLTEST tattr-2.ddl --enable-error-stack -a "/\/attr1" --attribute /attr4 --attribute=/attr5 tattr.h5 -TOOLTEST tattr-2.ddl --enable-error-stack -N "/\/attr1" --any_path /attr4 --any_path=/attr5 tattr.h5 -# test for header and error messages -TOOLTEST4 tattr-3.ddl --enable-error-stack --header -a /attr2 --attribute=/attr tattr.h5 -# test for displaying at least 9 attributes on root from a BE machine -TOOLTEST tattr-4_be.ddl --enable-error-stack tattr4_be.h5 -# test for displaying attributes in shared datatype (also in group and dataset) -TOOLTEST tnamed_dtype_attr.ddl --enable-error-stack tnamed_dtype_attr.h5 - -# test for displaying soft links and user-defined links -TOOLTEST tslink-1.ddl --enable-error-stack tslink.h5 -TOOLTEST tudlink-1.ddl --enable-error-stack tudlink.h5 -# test for displaying the selected link -TOOLTEST tslink-2.ddl --enable-error-stack -l slink2 tslink.h5 -TOOLTEST tslink-2.ddl --enable-error-stack -N slink2 tslink.h5 -TOOLTEST tudlink-2.ddl --enable-error-stack -l udlink2 tudlink.h5 -# test for displaying dangling soft links -TOOLTEST4 tslink-D.ddl --enable-error-stack -d /slink1 tslink.h5 - -# tests for hard links -TOOLTEST thlink-1.ddl --enable-error-stack thlink.h5 -TOOLTEST thlink-2.ddl --enable-error-stack -d /g1/dset2 --dataset /dset1 --dataset=/g1/g1.1/dset3 thlink.h5 -TOOLTEST thlink-3.ddl --enable-error-stack -d /g1/g1.1/dset3 --dataset /g1/dset2 --dataset=/dset1 thlink.h5 -TOOLTEST thlink-4.ddl --enable-error-stack -g /g1 thlink.h5 -TOOLTEST thlink-4.ddl --enable-error-stack -N /g1 thlink.h5 -TOOLTEST thlink-5.ddl --enable-error-stack -d /dset1 -g /g2 -d /g1/dset2 thlink.h5 -TOOLTEST thlink-5.ddl --enable-error-stack -N /dset1 -N /g2 -N /g1/dset2 thlink.h5 - -# tests for compound data types -TOOLTEST tcomp-1.ddl --enable-error-stack tcompound.h5 -# test for named data types -TOOLTEST tcomp-2.ddl --enable-error-stack -t /type1 --datatype /type2 --datatype=/group1/type3 tcompound.h5 -TOOLTEST tcomp-2.ddl --enable-error-stack -N /type1 --any_path /type2 --any_path=/group1/type3 tcompound.h5 -# test for unamed type -TOOLTEST4 tcomp-3.ddl --enable-error-stack -t /#6632 -g /group2 tcompound.h5 -# test complicated compound datatype -TOOLTEST tcomp-4.ddl --enable-error-stack tcompound_complex.h5 -TOOLTEST tcompound_complex.ddl --enable-error-stack tcompound_complex2.h5 -# tests for bitfields and opaque data types -TOOLTEST tbitnopaque.ddl --enable-error-stack tbitnopaque.h5 - -#test for the nested compound type -TOOLTEST tnestcomp-1.ddl --enable-error-stack tnestedcomp.h5 -TOOLTEST tnestedcmpddt.ddl --enable-error-stack tnestedcmpddt.h5 - -# test for options -TOOLTEST4 tall-1.ddl --enable-error-stack tall.h5 -TOOLTEST tall-2.ddl --enable-error-stack --header -g /g1/g1.1 -a attr2 tall.h5 -TOOLTEST tall-3.ddl --enable-error-stack -d /g2/dset2.1 -l /g1/g1.2/g1.2.1/slink tall.h5 -TOOLTEST tall-3.ddl --enable-error-stack -N /g2/dset2.1 -N /g1/g1.2/g1.2.1/slink tall.h5 -TOOLTEST tall-7.ddl --enable-error-stack -a attr1 tall.h5 -TOOLTEST tall-7N.ddl --enable-error-stack -N attr1 tall.h5 - -# test for loop detection -TOOLTEST tloop-1.ddl --enable-error-stack tloop.h5 - -# test for string -TOOLTEST tstr-1.ddl --enable-error-stack tstr.h5 -TOOLTEST tstr-2.ddl --enable-error-stack tstr2.h5 - -# test for file created by Lib SAF team -TOOLTEST tsaf.ddl --enable-error-stack tsaf.h5 - -# test for file with variable length data -TOOLTEST tvldtypes1.ddl --enable-error-stack tvldtypes1.h5 -TOOLTEST tvldtypes2.ddl --enable-error-stack tvldtypes2.h5 -TOOLTEST tvldtypes3.ddl --enable-error-stack tvldtypes3.h5 -TOOLTEST tvldtypes4.ddl --enable-error-stack tvldtypes4.h5 -TOOLTEST tvldtypes5.ddl --enable-error-stack tvldtypes5.h5 - -#test for file with variable length string data -TOOLTEST tvlstr.ddl --enable-error-stack tvlstr.h5 -TOOLTEST tvlenstr_array.ddl --enable-error-stack tvlenstr_array.h5 - -# test for files with array data -TOOLTEST tarray1.ddl --enable-error-stack tarray1.h5 -# # added for bug# 2092 - tarray1_big.h -TOOLTEST4 tarray1_big.ddl --enable-error-stack -R tarray1_big.h5 -TOOLTEST tarray2.ddl --enable-error-stack tarray2.h5 -TOOLTEST tarray3.ddl --enable-error-stack tarray3.h5 -TOOLTEST tarray4.ddl --enable-error-stack tarray4.h5 -TOOLTEST tarray5.ddl --enable-error-stack tarray5.h5 -TOOLTEST tarray6.ddl --enable-error-stack tarray6.h5 -TOOLTEST tarray7.ddl --enable-error-stack tarray7.h5 -TOOLTEST tarray8.ddl --enable-error-stack tarray8.h5 - -# test for wildcards in filename (does not work with cmake) -# inconsistent across platforms TOOLTEST3 tstarfile.ddl --enable-error-stack -H -d Dataset1 tarr*.h5 -#TOOLTEST4 tqmarkfile.ddl --enable-error-stack -H -d Dataset1 tarray?.h5 -TOOLTEST tmultifile.ddl --enable-error-stack -H -d Dataset1 tarray2.h5 tarray3.h5 tarray4.h5 tarray5.h5 tarray6.h5 tarray7.h5 - -# test for files with empty data -TOOLTEST tempty.ddl --enable-error-stack tempty.h5 - -# test for files with groups that have comments -TOOLTEST tgrp_comments.ddl --enable-error-stack tgrp_comments.h5 - -# test the --filedriver flag -TOOLTEST tsplit_file.ddl --enable-error-stack --filedriver=split tsplit_file -TOOLTEST tfamily.ddl --enable-error-stack --filedriver=family tfamily%05d.h5 -TOOLTEST tmulti.ddl --enable-error-stack --filedriver=multi tmulti - -# test for files with group names which reach > 1024 bytes in size -TOOLTEST tlarge_objname.ddl --enable-error-stack -w157 tlarge_objname.h5 - -# test '-A' to suppress data but print attr's -TOOLTEST4 tall-2A.ddl --enable-error-stack -A tall.h5 - -# test '-A' to suppress attr's but print data -TOOLTEST4 tall-2A0.ddl --enable-error-stack -A 0 tall.h5 - -# test '-r' to print attributes in ASCII instead of decimal -TOOLTEST4 tall-2B.ddl --enable-error-stack -A -r tall.h5 - -# test Subsetting -TOOLTEST tall-4s.ddl --enable-error-stack --dataset=/g1/g1.1/dset1.1.1 --start=1,1 --stride=2,3 --count=3,2 --block=1,1 tall.h5 -TOOLTEST tall-5s.ddl --enable-error-stack -d "/g1/g1.1/dset1.1.2[0;2;10;]" tall.h5 -TOOLTEST tdset-3s.ddl --enable-error-stack -d "/dset1[1,1;;;]" tdset.h5 -TOOLTEST tno-subset.ddl --enable-error-stack --no-compact-subset -d "AHFINDERDIRECT::ah_centroid_t[0] it=0 tl=0" tno-subset.h5 - -TOOLTEST tints4dimsCount2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -c 2,2,2,2 tints4dims.h5 -TOOLTEST tints4dimsBlock2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -c 1,1,1,1 -k 2,2,2,2 tints4dims.h5 -TOOLTEST tints4dimsStride2.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,2,2 -c 2,2,2,2 tints4dims.h5 -TOOLTEST tints4dimsCountEq.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,1,1 -k 1,2,1,1 -c 2,2,4,4 tints4dims.h5 -TOOLTEST tints4dimsBlockEq.ddl --enable-error-stack -d FourDimInts -s 0,0,0,0 -S 2,2,1,1 -c 2,2,1,1 -k 1,2,4,4 tints4dims.h5 - -# test printing characters in ASCII instead of decimal -TOOLTEST tchar1.ddl --enable-error-stack -r tchar.h5 - -# test datatypes in ASCII and UTF8 -TOOLTEST charsets.ddl --enable-error-stack charsets.h5 - -# rev. 2004 - -# tests for super block -TOOLTEST tboot1.ddl --enable-error-stack -H -B -d dset tfcontents1.h5 -TOOLTEST tboot2.ddl --enable-error-stack -B tfcontents2.h5 -TOOLTEST tboot2A.ddl --enable-error-stack --boot-block tfcontents2.h5 -TOOLTEST tboot2B.ddl --enable-error-stack --superblock tfcontents2.h5 -TOOLTEST file_space.ddl --enable-error-stack -B file_space.h5 - -# test -p with a non existing dataset -TOOLTEST4 tperror.ddl --enable-error-stack -p -d bogus tfcontents1.h5 - -# test for file contents -TOOLTEST tcontents.ddl --enable-error-stack -n tfcontents1.h5 -TOOLTEST tordercontents1.ddl --enable-error-stack -n --sort_by=name --sort_order=ascending tfcontents1.h5 -TOOLTEST tordercontents2.ddl --enable-error-stack -n --sort_by=name --sort_order=descending tfcontents1.h5 -TOOLTEST tattrcontents1.ddl --enable-error-stack -n 1 --sort_order=ascending tall.h5 -TOOLTEST tattrcontents2.ddl --enable-error-stack -n 1 --sort_order=descending tall.h5 - -# tests for storage layout -# compact -TOOLTEST tcompact.ddl --enable-error-stack -H -p -d compact tfilters.h5 -# contiguous -TOOLTEST tcontiguos.ddl --enable-error-stack -H -p -d contiguous tfilters.h5 -# chunked -TOOLTEST tchunked.ddl --enable-error-stack -H -p -d chunked tfilters.h5 -# external -TOOLTEST texternal.ddl --enable-error-stack -H -p -d external tfilters.h5 - -# fill values -TOOLTEST tfill.ddl --enable-error-stack -p tfvalues.h5 - -# several datatype, with references , print path -TOOLTEST treference.ddl --enable-error-stack tattr2.h5 - -# escape/not escape non printable characters -TOOLTEST tstringe.ddl --enable-error-stack -e tstr3.h5 -TOOLTEST tstring.ddl --enable-error-stack tstr3.h5 -# char data as ASCII with non escape -TOOLTEST tstring2.ddl --enable-error-stack -r -d str4 tstr3.h5 - -# array indices print/not print -TOOLTEST tindicesyes.ddl --enable-error-stack taindices.h5 -TOOLTEST tindicesno.ddl --enable-error-stack -y taindices.h5 - -########## array indices with subsetting -# 1D case -TOOLTEST tindicessub1.ddl --enable-error-stack -d 1d -s 1 -S 10 -c 2 -k 3 taindices.h5 - -# 2D case -TOOLTEST tindicessub2.ddl --enable-error-stack -d 2d -s 1,2 -S 3,3 -c 3,2 -k 2,2 taindices.h5 - -# 3D case -TOOLTEST tindicessub3.ddl --enable-error-stack -d 3d -s 0,1,2 -S 1,3,3 -c 2,2,2 -k 1,2,2 taindices.h5 - -# 4D case -TOOLTEST tindicessub4.ddl --enable-error-stack -d 4d -s 0,0,1,2 -c 2,2,3,2 -S 1,1,3,3 -k 1,1,2,2 taindices.h5 - -#Exceed the dimensions for subsetting -TOOLTEST texceedsubstart.ddl --enable-error-stack -d 1d -s 1,3 taindices.h5 -TOOLTEST texceedsubcount.ddl --enable-error-stack -d 1d -c 1,3 taindices.h5 -TOOLTEST texceedsubstride.ddl --enable-error-stack -d 1d -S 1,3 taindices.h5 -TOOLTEST texceedsubblock.ddl --enable-error-stack -d 1d -k 1,3 taindices.h5 - - -# tests for filters -# SZIP -TOOLTEST tszip.ddl --enable-error-stack -H -p -d szip tfilters.h5 -# deflate -TOOLTEST tdeflate.ddl --enable-error-stack -H -p -d deflate tfilters.h5 -# shuffle -TOOLTEST tshuffle.ddl --enable-error-stack -H -p -d shuffle tfilters.h5 -# fletcher32 -TOOLTEST tfletcher32.ddl --enable-error-stack -H -p -d fletcher32 tfilters.h5 -# nbit -TOOLTEST tnbit.ddl --enable-error-stack -H -p -d nbit tfilters.h5 -# scaleoffset -TOOLTEST tscaleoffset.ddl --enable-error-stack -H -p -d scaleoffset tfilters.h5 -# all -TOOLTEST tallfilters.ddl --enable-error-stack -H -p -d all tfilters.h5 -# user defined -TOOLTEST tuserfilter.ddl --enable-error-stack -H -p -d myfilter tfilters.h5 - -if test $USE_FILTER_DEFLATE = "yes" ; then - # data read internal filters - TOOLTEST treadintfilter.ddl --enable-error-stack -d deflate -d shuffle -d fletcher32 -d nbit -d scaleoffset tfilters.h5 - if test $USE_FILTER_SZIP = "yes"; then - # data read - TOOLTEST treadfilter.ddl --enable-error-stack -d all -d szip tfilters.h5 - fi -fi - -# test for displaying objects with very long names -TOOLTEST tlonglinks.ddl --enable-error-stack tlonglinks.h5 - -# dimensions over 4GB, print boundary -TOOLTEST tbigdims.ddl --enable-error-stack -d dset4gb -s 4294967284 -c 22 tbigdims.h5 - -# hyperslab read -TOOLTEST thyperslab.ddl --enable-error-stack thyperslab.h5 - - -# - -# test for displaying dataset and attribute of null space -TOOLTEST tnullspace.ddl --enable-error-stack tnullspace.h5 - -# test for displaying dataset and attribute of space with 0 dimension size -TOOLTEST zerodim.ddl --enable-error-stack zerodim.h5 - -# test for long double (some systems do not have long double) -#TOOLTEST tldouble.ddl --enable-error-stack tldouble.h5 - -# test for vms -TOOLTEST tvms.ddl --enable-error-stack tvms.h5 - -# test for binary output -TOOLTEST tbin1.ddl --enable-error-stack -d integer -o out1.bin -b LE tbinary.h5 - -# test for string binary output -TOOLTEST2B tstr2bin2.exp --enable-error-stack -d /g2/dset2 -b -o tstr2bin2.txt tstr2.h5 -TOOLTEST2B tstr2bin6.exp --enable-error-stack -d /g6/dset6 -b -o tstr2bin6.txt tstr2.h5 - -# NATIVE default. the NATIVE test can be validated with h5import/h5diff -TOOLTEST tbin1.ddl --enable-error-stack -d integer -o out1.bin -b tbinary.h5 -IMPORTTEST out1.bin -c out3.h5import -o out1.h5 -DIFFTEST tbinary.h5 out1.h5 /integer /integer -# Same but use h5dump as input to h5import -IMPORTTEST out1.bin -c tbin1.ddl -o out1D.h5 -DIFFTEST tbinary.h5 out1D.h5 /integer /integer - -TOOLTEST tbin2.ddl --enable-error-stack -b BE -d float -o out2.bin tbinary.h5 - -# the NATIVE test can be validated with h5import/h5diff -TOOLTEST tbin3.ddl --enable-error-stack -d integer -o out3.bin -b NATIVE tbinary.h5 -IMPORTTEST out3.bin -c out3.h5import -o out3.h5 -DIFFTEST tbinary.h5 out3.h5 /integer /integer -# Same but use h5dump as input to h5import -IMPORTTEST out3.bin -c tbin3.ddl -o out3D.h5 -DIFFTEST tbinary.h5 out3D.h5 /integer /integer - -TOOLTEST tbin4.ddl --enable-error-stack -d double -b FILE -o out4.bin tbinary.h5 - -# Clean up binary output files -if test -z "$HDF5_NOCLEANUP"; then - rm -f out[1-4].bin - rm -f out1.h5 - rm -f out3.h5 -fi - -# test for dataset region references -TOOLTEST tdatareg.ddl --enable-error-stack tdatareg.h5 -TOOLTEST4 tdataregR.ddl --enable-error-stack -R tdatareg.h5 -TOOLTEST tattrreg.ddl --enable-error-stack tattrreg.h5 -TOOLTEST4 tattrregR.ddl --enable-error-stack -R tattrreg.h5 -TOOLTEST2 tbinregR.exp --enable-error-stack -d /Dataset1 -s 0 -R -y -o tbinregR.txt tdatareg.h5 - -# Clean up text output files -if test -z "$HDF5_NOCLEANUP"; then - rm -f tbinregR.txt -fi - -# tests for group creation order -# "1" tracked, "2" name, root tracked -TOOLTEST tordergr1.ddl --enable-error-stack --group=1 --sort_by=creation_order --sort_order=ascending tordergr.h5 -TOOLTEST tordergr2.ddl --enable-error-stack --group=1 --sort_by=creation_order --sort_order=descending tordergr.h5 -TOOLTEST tordergr3.ddl --enable-error-stack -g 2 -q name -z ascending tordergr.h5 -TOOLTEST tordergr4.ddl --enable-error-stack -g 2 -q name -z descending tordergr.h5 -TOOLTEST tordergr5.ddl --enable-error-stack -q creation_order tordergr.h5 - -# tests for attribute order -TOOLTEST torderattr1.ddl --enable-error-stack -H --sort_by=name --sort_order=ascending torderattr.h5 -TOOLTEST torderattr2.ddl --enable-error-stack -H --sort_by=name --sort_order=descending torderattr.h5 -TOOLTEST torderattr3.ddl --enable-error-stack -H --sort_by=creation_order --sort_order=ascending torderattr.h5 -TOOLTEST torderattr4.ddl --enable-error-stack -H --sort_by=creation_order --sort_order=descending torderattr.h5 - -# tests for link references and order -TOOLTEST4 torderlinks1.ddl --enable-error-stack --sort_by=name --sort_order=ascending tfcontents1.h5 -TOOLTEST4 torderlinks2.ddl --enable-error-stack --sort_by=name --sort_order=descending tfcontents1.h5 - -# tests for floating point user defined printf format -TOOLTEST tfpformat.ddl --enable-error-stack -m %.7f tfpformat.h5 - -# tests for traversal of external links -TOOLTEST4 textlinksrc.ddl --enable-error-stack textlinksrc.h5 -TOOLTEST4 textlinkfar.ddl --enable-error-stack textlinkfar.h5 - -# test for dangling external links -TOOLTEST4 textlink.ddl --enable-error-stack textlink.h5 - -# test for error stack display (BZ2048) -TOOLTEST5 filter_fail.ddl --enable-error-stack filter_fail.h5 - -# test for -o -y for dataset with attributes -TOOLTEST2 tall-6.exp --enable-error-stack -y -o tall-6.txt -d /g1/g1.1/dset1.1.1 tall.h5 - -# test for non-existing file -TOOLTEST3 non_existing.ddl --enable-error-stack tgroup.h5 non_existing.h5 - -# Clean up temporary files/directories -CLEAN_TESTFILES_AND_TESTDIR - -# Report test results and exit -if test $nerrors -eq 0 ; then - echo "All $TESTNAME tests passed." - exit $EXIT_SUCCESS -else - echo "$TESTNAME tests failed with $nerrors errors." - exit $EXIT_FAILURE -fi |