diff options
Diffstat (limited to 'tools/h5dump/testh5dumppbits.sh.in')
| -rw-r--r-- | tools/h5dump/testh5dumppbits.sh.in | 598 |
1 files changed, 0 insertions, 598 deletions
diff --git a/tools/h5dump/testh5dumppbits.sh.in b/tools/h5dump/testh5dumppbits.sh.in deleted file mode 100644 index 446020a..0000000 --- a/tools/h5dump/testh5dumppbits.sh.in +++ /dev/null @@ -1,598 +0,0 @@ -#! /bin/sh -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. -# -# Tests for the h5dump tool with packed bits type files - -srcdir=@srcdir@ - -# Determine which filters are available -USE_FILTER_SZIP="@USE_FILTER_SZIP@" -USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" - -TESTNAME=h5dump -EXIT_SUCCESS=0 -EXIT_FAILURE=1 - -DUMPER=h5dump # The tool name -DUMPER_BIN=`pwd`/$DUMPER # The path of the tool binary - -H5DIFF=../h5diff/h5diff # The h5diff tool name -H5DIFF_BIN=`pwd`/$H5DIFF # The path of the h5diff tool binary - -H5IMPORT=../h5import/h5import # The h5import tool name -H5IMPORT_BIN=`pwd`/$H5IMPORT # The path of the h5import tool binary - -RM='rm -rf' -CMP='cmp -s' -DIFF='diff -c' -CP='cp' -DIRNAME='dirname' -LS='ls' -AWK='awk' - -nerrors=0 -verbose=yes - -# source dirs -SRC_TOOLS="$srcdir/../" - -SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" -# testfiles source dirs for tools -SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES" -SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES" -SRC_H5DUMP_ERRORFILES="$srcdir/errfiles" -SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles" -SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles" -SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles" -SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles" -SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles" -SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles" - -TEST_P_DIR=./testfiles -TESTDIR=./testfiles/pbits -test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR -test -d $TESTDIR || mkdir -p $TESTDIR - -###################################################################### -# test files -# -------------------------------------------------------------------- -# All the test files copy from source directory to test directory -# NOTE: Keep this framework to add/remove test files. -# Any test files from other tools can be used in this framework. -# This list are also used for checking exist. -# Comment '#' without space can be used. -# -------------------------------------------------------------------- -LIST_HDF5_TEST_FILES=" -$SRC_H5DUMP_TESTFILES/packedbits.h5 -$SRC_H5DUMP_TESTFILES/tarray1.h5 -$SRC_H5DUMP_TESTFILES/tcompound.h5 -" - -LIST_OTHER_TEST_FILES=" -$SRC_H5DUMP_TESTFILES/pbits/tnofilename-with-packed-bits.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsArray.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsCompound.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsIncomplete.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsLengthExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsCharLengthExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsIntLengthExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsLongLengthExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsLengthPositive.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsMax.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsMaxExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsOffsetExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsCharOffsetExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsIntOffsetExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsLongOffsetExceeded.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsOffsetNegative.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsOverlapped.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSigned.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsigned.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedInt.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedInt.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLong.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLong.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLongLong.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLongLong.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedIntWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedIntWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLongWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLongWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLongLongWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLongLongWhole.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLongLongWhole1.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLongLongWhole1.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLongLongWhole63.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLongLongWhole63.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSigned4.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsigned4.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedInt8.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedInt8.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLong16.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLong16.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLongLong32.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLongLong32.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSigned2.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsigned2.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedInt4.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedInt4.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLong8.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLong8.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsSignedLongLong16.ddl -$SRC_H5DUMP_TESTFILES/pbits/tpbitsUnsignedLongLong16.ddl -" - -LIST_ERROR_TEST_FILES=" -${SRC_H5DUMP_ERRORFILES}/tnofilename-with-packed-bits.err -${SRC_H5DUMP_ERRORFILES}/tpbitsCharLengthExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsCharOffsetExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsIncomplete.err -${SRC_H5DUMP_ERRORFILES}/tpbitsIntLengthExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsIntOffsetExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsLengthExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsLengthPositive.err -${SRC_H5DUMP_ERRORFILES}/tpbitsLongLengthExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsLongOffsetExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsMaxExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsOffsetExceeded.err -${SRC_H5DUMP_ERRORFILES}/tpbitsOffsetNegative.err -" - -# -# copy test files and expected output files from source dirs to test dir -# -COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_ERROR_TEST_FILES" - -COPY_TESTFILES_TO_TESTDIR() -{ - # copy test files. Used -f to make sure get a new copy - for tstfile in $COPY_TESTFILES - do - # ignore '#' comment - echo $tstfile | tr -d ' ' | grep '^#' > /dev/null - RET=$? - if [ $RET -eq 1 ]; then - # skip cp if srcdir is same as destdir - # this occurs when build/test performed in source dir and - # make cp fail - SDIR=`$DIRNAME $tstfile` - INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` - INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` - if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then - $CP -f $tstfile $TESTDIR - if [ $? -ne 0 ]; then - echo "Error: FAILED to copy $tstfile ." - - # Comment out this to CREATE expected file - exit $EXIT_FAILURE - fi - fi - fi - done -} - -CLEAN_TESTFILES_AND_TESTDIR() -{ - # skip rm if srcdir is same as destdir - # this occurs when build/test performed in source dir and - # make cp fail - SDIR=$SRC_H5DUMP_TESTFILES/pbits - INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` - INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` - if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then - $RM $TESTDIR - fi -} - -# Print a line-line message left justified in a field of 70 characters -# beginning with the word "Testing". -# -TESTING() { - SPACES=" " - echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012' -} - -# Source in the output filter function definitions. -. $srcdir/../../bin/output_filter.sh - -# Run a test and print PASS or *FAIL*. If a test fails then increment -# the `nerrors' global variable and (if $verbose is set) display the -# difference between the actual output and the expected output. The -# expected output is given as the first argument to this function and -# the actual output file is calculated by replacing the `.ddl' with -# `.out'. The actual output is not removed if $HDF5_NOCLEANUP has a -# non-zero value. -# -TOOLTEST() { - expect="$TESTDIR/$1" - actual="$TESTDIR/`basename $1 .ddl`.out" - actual_err="$TESTDIR/`basename $1 .ddl`.err" - actual_sav=${actual}-sav - actual_err_sav=${actual_err}-sav - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - - # save actual and actual_err in case they are needed later. - cp $actual $actual_sav - STDOUT_FILTER $actual - cp $actual_err $actual_err_sav - STDERR_FILTER $actual_err - cat $actual_err >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext - fi - -} - - -# same as TOOLTEST1 but compares generated file to expected output -# and compares the generated data file to the expected data file -# used for the binary tests that expect a full path in -o without -b -TOOLTEST2() { - - expectdata="$TESTDIR/$1" - expect="$TESTDIR/`basename $1 .exp`.ddl" - actualdata="$TESTDIR/`basename $1 .exp`.txt" - actual="$TESTDIR/`basename $1 .exp`.out" - actual_err="$TESTDIR/`basename $1 .exp`.err" - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - cat $actual_err >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - if [ ! -f $expectdata ]; then - # Create the expect data file if it doesn't yet exist. - echo " CREATED" - cp $actualdata $expectdata - elif $CMP $expectdata $actualdata; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected datafile (*.exp) differs from actual datafile (*.txt)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/ /' - fi - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actualdata $actual_err - fi - -} - -# same as TOOLTEST but filters error stack outp -# Extract file name, line number, version and thread IDs because they may be different -TOOLTEST3() { - - expect="$TESTDIR/$1" - actual="$TESTDIR/`basename $1 .ddl`.out" - actual_err="$TESTDIR/`basename $1 .ddl`.err" - actual_ext="$TESTDIR/`basename $1 .ddl`.ext" - actual_sav=${actual}-sav - actual_err_sav=${actual_err}-sav - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - - # save actual and actual_err in case they are needed later. - cp $actual $actual_sav - STDOUT_FILTER $actual - cp $actual_err $actual_err_sav - STDERR_FILTER $actual_err - - # Extract file name, line number, version and thread IDs because they may be different - sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \ - -e 's/line [0-9]*/line (number)/' \ - -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \ - -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \ - -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \ - -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \ - $actual_err > $actual_ext - cat $actual_ext >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err $actual_sav $actual_err_sav - fi - -} - -# same as TOOLTEST3 but filters error stack output and compares to an error file -# Extract file name, line number, version and thread IDs because they may be different -TOOLTEST4() { - - expect="$TESTDIR/$1" - expect_err="$TESTDIR/`basename $1 .ddl`.err" - actual="$TESTDIR/`basename $1 .ddl`.out" - actual_err="$TESTDIR/`basename $1 .ddl`.oerr" - actual_ext="$TESTDIR/`basename $1 .ddl`.ext" - actual_sav=${actual}-sav - actual_err_sav=${actual_err}-sav - shift - - # Run test. - TESTING $DUMPER $@ - ( - cd $TESTDIR - $RUNSERIAL $DUMPER_BIN "$@" - ) >$actual 2>$actual_err - - # save actual and actual_err in case they are needed later. - cp $actual $actual_sav - STDOUT_FILTER $actual - cp $actual_err $actual_err_sav - STDERR_FILTER $actual_err - - # Extract file name, line number, version and thread IDs because they may be different - sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \ - -e 's/line [0-9]*/line (number)/' \ - -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \ - -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \ - -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \ - -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \ - $actual_err > $actual_ext - #cat $actual_ext >> $actual - - if [ ! -f $expect ]; then - # Create the expect file if it doesn't yet exist. - echo " CREATED" - cp $actual $expect - elif $CMP $expect $actual; then - if $CMP $expect_err $actual_ext; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.err) differs from actual result (*.oerr)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/ /' - fi - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' - fi - - # Clean up output file - if test -z "$HDF5_NOCLEANUP"; then - rm -f $actual $actual_err $actual_sav $actual_err_sav - fi - -} - -# Print a "SKIP" message -SKIP() { - TESTING $DUMPER $@ - echo " -SKIP-" -} - -# Print a line-line message left justified in a field of 70 characters -# -PRINT_H5DIFF() { - SPACES=" " - echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012' -} - - -# Call the h5diff tool -# -DIFFTEST() -{ - PRINT_H5DIFF $@ - ( - cd $TESTDIR - $RUNSERIAL $H5DIFF_BIN "$@" -q - ) - RET=$? - if [ $RET != 0 ] ; then - echo "*FAILED*" - nerrors="`expr $nerrors + 1`" - else - echo " PASSED" - fi - -} - -# Print a line-line message left justified in a field of 70 characters -# beginning with the word "Verifying". -# -PRINT_H5IMPORT() { - SPACES=" " - echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012' -} - -# Call the h5import tool -# -IMPORTTEST() -{ - # remove the output hdf5 file if it exists - hdf5_file="$TESTDIR/$5" - if [ -f $hdf5_file ]; then - rm -f $hdf5_file - fi - - PRINT_H5IMPORT $@ - ( - cd $TESTDIR - $RUNSERIAL $H5IMPORT_BIN "$@" - ) - RET=$? - if [ $RET != 0 ] ; then - echo "*FAILED*" - nerrors="`expr $nerrors + 1`" - else - echo " PASSED" - fi - -} - - -############################################################################## -############################################################################## -### T H E T E S T S ### -############################################################################## -############################################################################## -# prepare for test -COPY_TESTFILES_TO_TESTDIR - -####### test for dataset packed bits ###### - -# test failure handling -# Missing file name -TOOLTEST tnofilename-with-packed-bits.ddl --enable-error-stack -# Limits: -# Maximum number of packed bits is 8 (for now). -# Maximum integer size is 64 (for now). -# Maximun Offset is 63 (Maximum size - 1). -# Maximum Offset+Length is 64 (Maximum size). -# Tests: -# Normal operation on both signed and unsigned int datasets. -# Sanity check -# Their rawdata output should be the same. -TOOLTEST tpbitsSignedWhole.ddl --enable-error-stack -d /DS08BITS -M 0,8 packedbits.h5 -TOOLTEST tpbitsUnsignedWhole.ddl --enable-error-stack -d /DU08BITS -M 0,8 packedbits.h5 -TOOLTEST tpbitsSignedIntWhole.ddl --enable-error-stack -d /DS16BITS -M 0,16 packedbits.h5 -TOOLTEST tpbitsUnsignedIntWhole.ddl --enable-error-stack -d /DU16BITS -M 0,16 packedbits.h5 -TOOLTEST tpbitsSignedLongWhole.ddl --enable-error-stack -d /DS32BITS -M 0,32 packedbits.h5 -TOOLTEST tpbitsUnsignedLongWhole.ddl --enable-error-stack -d /DU32BITS -M 0,32 packedbits.h5 -TOOLTEST tpbitsSignedLongLongWhole.ddl --enable-error-stack -d /DS64BITS -M 0,64 packedbits.h5 -TOOLTEST tpbitsUnsignedLongLongWhole.ddl --enable-error-stack -d /DU64BITS -M 0,64 packedbits.h5 -TOOLTEST tpbitsSignedLongLongWhole63.ddl --enable-error-stack -d /DS64BITS -M 0,63 packedbits.h5 -TOOLTEST tpbitsUnsignedLongLongWhole63.ddl --enable-error-stack -d /DU64BITS -M 0,63 packedbits.h5 -TOOLTEST tpbitsSignedLongLongWhole1.ddl --enable-error-stack -d /DS64BITS -M 1,63 packedbits.h5 -TOOLTEST tpbitsUnsignedLongLongWhole1.ddl --enable-error-stack -d /DU64BITS -M 1,63 packedbits.h5 -# Half sections -TOOLTEST tpbitsSigned4.ddl --enable-error-stack -d /DS08BITS -M 0,4,4,4 packedbits.h5 -TOOLTEST tpbitsUnsigned4.ddl --enable-error-stack -d /DU08BITS -M 0,4,4,4 packedbits.h5 -TOOLTEST tpbitsSignedInt8.ddl --enable-error-stack -d /DS16BITS -M 0,8,8,8 packedbits.h5 -TOOLTEST tpbitsUnsignedInt8.ddl --enable-error-stack -d /DU16BITS -M 0,8,8,8 packedbits.h5 -TOOLTEST tpbitsSignedLong16.ddl --enable-error-stack -d /DS32BITS -M 0,16,16,16 packedbits.h5 -TOOLTEST tpbitsUnsignedLong16.ddl --enable-error-stack -d /DU32BITS -M 0,16,16,16 packedbits.h5 -TOOLTEST tpbitsSignedLongLong32.ddl --enable-error-stack -d /DS64BITS -M 0,32,32,32 packedbits.h5 -TOOLTEST tpbitsUnsignedLongLong32.ddl --enable-error-stack -d /DU64BITS -M 0,32,32,32 packedbits.h5 -# Quarter sections -TOOLTEST tpbitsSigned2.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5 -TOOLTEST tpbitsUnsigned2.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5 -TOOLTEST tpbitsSignedInt4.ddl --enable-error-stack -d /DS16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5 -TOOLTEST tpbitsUnsignedInt4.ddl --enable-error-stack -d /DU16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5 -TOOLTEST tpbitsSignedLong8.ddl --enable-error-stack -d /DS32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5 -TOOLTEST tpbitsUnsignedLong8.ddl --enable-error-stack -d /DU32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5 -TOOLTEST tpbitsSignedLongLong16.ddl --enable-error-stack -d /DS64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5 -TOOLTEST tpbitsUnsignedLongLong16.ddl --enable-error-stack -d /DU64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5 -# Begin and End -TOOLTEST tpbitsSigned.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,6 packedbits.h5 -TOOLTEST tpbitsUnsigned.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,6 packedbits.h5 -TOOLTEST tpbitsSignedInt.ddl --enable-error-stack -d /DS16BITS -M 0,2,10,6 packedbits.h5 -TOOLTEST tpbitsUnsignedInt.ddl --enable-error-stack -d /DU16BITS -M 0,2,10,6 packedbits.h5 -TOOLTEST tpbitsSignedLong.ddl --enable-error-stack -d /DS32BITS -M 0,2,26,6 packedbits.h5 -TOOLTEST tpbitsUnsignedLong.ddl --enable-error-stack -d /DU32BITS -M 0,2,26,6 packedbits.h5 -TOOLTEST tpbitsSignedLongLong.ddl --enable-error-stack -d /DS64BITS -M 0,2,58,6 packedbits.h5 -TOOLTEST tpbitsUnsignedLongLong.ddl --enable-error-stack -d /DU64BITS -M 0,2,58,6 packedbits.h5 -# Overlapped packed bits. -TOOLTEST tpbitsOverlapped.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,0,3 packedbits.h5 -# Maximum number of packed bits. -TOOLTEST tpbitsMax.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5 -# Compound type. -TOOLTEST tpbitsCompound.ddl --enable-error-stack -d /dset1 -M 0,1,1,1 tcompound.h5 -# Array type. -TOOLTEST tpbitsArray.ddl --enable-error-stack -d /Dataset1 -M 0,1,1,1 tarray1.h5 -# Test Error handling. -# Too many packed bits requested. Max is 8 for now. -TOOLTEST tpbitsMaxExceeded.ddl --enable-error-stack -d /DS08BITS -M 0,1,0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5 -# Offset too large. Max is 7 (8-1) for now. -TOOLTEST tpbitsOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 64,1 packedbits.h5 -TOOLTEST tpbitsCharOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 8,1 packedbits.h5 -TOOLTEST tpbitsIntOffsetExceeded.ddl --enable-error-stack -d /DS16BITS -M 16,1 packedbits.h5 -TOOLTEST tpbitsLongOffsetExceeded.ddl --enable-error-stack -d /DS32BITS -M 32,1 packedbits.h5 -# Bad offset, must not be negative. -TOOLTEST tpbitsOffsetNegative.ddl --enable-error-stack -d /DS08BITS -M -1,1 packedbits.h5 -# Bad length, must not be positive. -TOOLTEST tpbitsLengthPositive.ddl --enable-error-stack -d /DS08BITS -M 4,0 packedbits.h5 -# Offset+Length is too large. Max is 8 for now. -TOOLTEST tpbitsLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 37,28 packedbits.h5 -TOOLTEST tpbitsCharLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 2,7 packedbits.h5 -TOOLTEST tpbitsIntLengthExceeded.ddl --enable-error-stack -d /DS16BITS -M 10,7 packedbits.h5 -TOOLTEST tpbitsLongLengthExceeded.ddl --enable-error-stack -d /DS32BITS -M 26,7 packedbits.h5 -# Incomplete pair of packed bits request. -TOOLTEST tpbitsIncomplete.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,1,0,2,2, packedbits.h5 - -# Clean up temporary files/directories -CLEAN_TESTFILES_AND_TESTDIR - -# Report test results and exit -if test $nerrors -eq 0 ; then - echo "All $TESTNAME tests passed." - exit $EXIT_SUCCESS -else - echo "$TESTNAME tests failed with $nerrors errors." - exit $EXIT_FAILURE -fi |