diff options
Diffstat (limited to 'tools/h5dump/testh5dumppbits.sh.in')
| -rw-r--r-- | tools/h5dump/testh5dumppbits.sh.in | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/tools/h5dump/testh5dumppbits.sh.in b/tools/h5dump/testh5dumppbits.sh.in new file mode 100644 index 0000000..393fcc1 --- /dev/null +++ b/tools/h5dump/testh5dumppbits.sh.in @@ -0,0 +1,495 @@ +#! /bin/sh +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# +# Tests for the h5dump tool with packed bits type files + +# Determine which filters are available +USE_FILTER_SZIP="@USE_FILTER_SZIP@" +USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" +USE_FILTER_SHUFFLE="@USE_FILTER_SHUFFLE@" +USE_FILTER_FLETCHER32="@USE_FILTER_FLETCHER32@" +USE_FILTER_NBIT="@USE_FILTER_NBIT@" +USE_FILTER_SCALEOFFSET="@USE_FILTER_SCALEOFFSET@" + +TESTNAME=h5dump +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +DUMPER=h5dump # The tool name +DUMPER_BIN=`pwd`/$DUMPER # The path of the tool binary + +H5DIFF=../h5diff/h5diff # The h5diff tool name +H5DIFF_BIN=`pwd`/$H5DIFF # The path of the h5diff tool binary + +H5IMPORT=../h5import/h5import # The h5import tool name +H5IMPORT_BIN=`pwd`/$H5IMPORT # The path of the h5import tool binary + + +CMP='cmp -s' +DIFF='diff -c' +CP='cp' + +nerrors=0 +verbose=yes + +# The build (current) directory might be different than the source directory. +if test -z "$srcdir"; then + srcdir=. +fi +# source dirs +SRC_TOOLS="$srcdir/../" + +SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" +# testfiles source dirs for tools +SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES" +SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES" +SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles" +SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles" +SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles" +SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles" +SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles" +SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles" + +TESTDIR=./testfiles +test -d $TESTDIR || mkdir $TESTDIR + +###################################################################### +# test files +# -------------------------------------------------------------------- +# All the test files copy from source directory to test directory +# NOTE: Keep this framework to add/remove test files. +# Any test files from other tools can be used in this framework. +# This list are also used for checking exist. +# Comment '#' without space can be used. +# -------------------------------------------------------------------- +LIST_HDF5_TEST_FILES=" +$SRC_H5DUMP_TESTFILES/packedbits.h5 +" + +LIST_OTHER_TEST_FILES=" +$SRC_H5DUMP_TESTFILES/tnofilename-with-packed-bits.ddl +$SRC_H5DUMP_TESTFILES/tpbitsArray.ddl +$SRC_H5DUMP_TESTFILES/tpbitsCompound.ddl +$SRC_H5DUMP_TESTFILES/tpbitsIncomplete.ddl +$SRC_H5DUMP_TESTFILES/tpbitsLengthExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsCharLengthExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsIntLengthExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsLongLengthExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsLengthPositive.ddl +$SRC_H5DUMP_TESTFILES/tpbitsMax.ddl +$SRC_H5DUMP_TESTFILES/tpbitsMaxExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsOffsetExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsCharOffsetExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsIntOffsetExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsLongOffsetExceeded.ddl +$SRC_H5DUMP_TESTFILES/tpbitsOffsetNegative.ddl +$SRC_H5DUMP_TESTFILES/tpbitsOverlapped.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSigned.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsigned.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedInt.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLong.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedIntWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedIntWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLongWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole1.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole1.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLongWhole63.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLongWhole63.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSigned4.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsigned4.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedInt8.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt8.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLong16.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong16.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong32.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong32.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSigned2.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsigned2.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedInt4.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedInt4.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLong8.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLong8.ddl +$SRC_H5DUMP_TESTFILES/tpbitsSignedLongLong16.ddl +$SRC_H5DUMP_TESTFILES/tpbitsUnsignedLongLong16.ddl +" + +# +# copy test files and expected output files from source dirs to test dir +# +COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_HDF5_TEST_FILES_XML $LIST_OTHER_TEST_FILES_XML" + +COPY_TESTFILES_TO_TESTDIR() +{ + # copy test files. Used -f to make sure get a new copy + for tstfile in $COPY_TESTFILES + do + # ignore '#' comment + echo $tstfile | tr -d ' ' | grep '^#' > /dev/null + RET=$? + if [ $RET -eq 1 ]; then + if [ -a $tstfile ]; then + $CP -f $tstfile $TESTDIR + else + echo "Error: FAILED to copy $tstfile" + echo " $tstfile doesn't exist!" + exit $EXIT_FAILURE + fi + fi + done +} + + +# Print a line-line message left justified in a field of 70 characters +# beginning with the word "Testing". +# +TESTING() { + SPACES=" " + echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012' +} + +# Source in the output filter function definitions. +. $srcdir/../../bin/output_filter.sh + +# Run a test and print PASS or *FAIL*. If a test fails then increment +# the `nerrors' global variable and (if $verbose is set) display the +# difference between the actual output and the expected output. The +# expected output is given as the first argument to this function and +# the actual output file is calculated by replacing the `.ddl' with +# `.out'. The actual output is not removed if $HDF5_NOCLEANUP has a +# non-zero value. +# +TOOLTEST() { + expect="$TESTDIR/$1" + actual="$TESTDIR/`basename $1 .ddl`.out" + actual_err="$TESTDIR/`basename $1 .ddl`.err" + actual_sav=${actual}-sav + actual_err_sav=${actual_err}-sav + shift + + # Run test. + TESTING $DUMPER $@ + ( + cd $TESTDIR + $RUNSERIAL $DUMPER_BIN "$@" + ) >$actual 2>$actual_err + + # save actual and actual_err in case they are needed later. + cp $actual $actual_sav + STDOUT_FILTER $actual + cp $actual_err $actual_err_sav + STDERR_FILTER $actual_err + cat $actual_err >> $actual + + if [ ! -f $expect ]; then + # Create the expect file if it doesn't yet exist. + echo " CREATED" + cp $actual $expect + elif $CMP $expect $actual; then + echo " PASSED" + else + echo "*FAILED*" + echo " Expected result (*.ddl) differs from actual result (*.out)" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' + fi + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext + fi + +} + + +# same as TOOLTEST1 but compares generated file to expected output +# and compares the generated data file to the expected data file +# used for the binary tests that expect a full path in -o without -b +TOOLTEST2() { + + expectdata="$TESTDIR/$1" + expect="$TESTDIR/`basename $1 .exp`.ddl" + actualdata="$TESTDIR/`basename $1 .exp`.txt" + actual="$TESTDIR/`basename $1 .exp`.out" + actual_err="$TESTDIR/`basename $1 .exp`.err" + shift + + # Run test. + TESTING $DUMPER $@ + ( + cd $TESTDIR + $RUNSERIAL $DUMPER_BIN "$@" + ) >$actual 2>$actual_err + cat $actual_err >> $actual + + if [ ! -f $expect ]; then + # Create the expect file if it doesn't yet exist. + echo " CREATED" + cp $actual $expect + elif $CMP $expect $actual; then + if [ ! -f $expectdata ]; then + # Create the expect data file if it doesn't yet exist. + echo " CREATED" + cp $actualdata $expectdata + elif $CMP $expectdata $actualdata; then + echo " PASSED" + else + echo "*FAILED*" + echo " Expected datafile (*.exp) differs from actual datafile (*.txt)" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/ /' + fi + else + echo "*FAILED*" + echo " Expected result (*.ddl) differs from actual result (*.out)" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' + fi + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f $actual $actualdata $actual_err + fi + +} + +# same as TOOLTEST but filters error stack outp +# Extract file name, line number, version and thread IDs because they may be different +TOOLTEST3() { + + expect="$TESTDIR/$1" + actual="$TESTDIR/`basename $1 .ddl`.out" + actual_err="$TESTDIR/`basename $1 .ddl`.err" + actual_ext="$TESTDIR/`basename $1 .ddl`.ext" + actual_sav=${actual}-sav + actual_err_sav=${actual_err}-sav + shift + + # Run test. + TESTING $DUMPER $@ + ( + cd $TESTDIR + $RUNSERIAL $DUMPER_BIN "$@" + ) >$actual 2>$actual_err + + # save actual and actual_err in case they are needed later. + cp $actual $actual_sav + STDOUT_FILTER $actual + cp $actual_err $actual_err_sav + STDERR_FILTER $actual_err + + # Extract file name, line number, version and thread IDs because they may be different + sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \ + -e 's/line [0-9]*/line (number)/' \ + -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \ + -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \ + -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \ + -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \ + $actual_err > $actual_ext + cat $actual_ext >> $actual + + if [ ! -f $expect ]; then + # Create the expect file if it doesn't yet exist. + echo " CREATED" + cp $actual $expect + elif $CMP $expect $actual; then + echo " PASSED" + else + echo "*FAILED*" + echo " Expected result (*.ddl) differs from actual result (*.out)" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' + fi + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f $actual $actual_err $actual_sav $actual_err_sav + fi + +} + +# Print a "SKIP" message +SKIP() { + TESTING $DUMPER $@ + echo " -SKIP-" +} + +# Print a line-line message left justified in a field of 70 characters +# +PRINT_H5DIFF() { + SPACES=" " + echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012' +} + + +# Call the h5diff tool +# +DIFFTEST() +{ + PRINT_H5DIFF $@ + ( + cd $TESTDIR + $RUNSERIAL $H5DIFF_BIN "$@" -q + ) + RET=$? + if [ $RET != 0 ] ; then + echo "*FAILED*" + nerrors="`expr $nerrors + 1`" + else + echo " PASSED" + fi + +} + +# Print a line-line message left justified in a field of 70 characters +# beginning with the word "Verifying". +# +PRINT_H5IMPORT() { + SPACES=" " + echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012' +} + +# Call the h5import tool +# +IMPORTTEST() +{ + # remove the output hdf5 file if it exists + hdf5_file="$TESTDIR/$5" + if [ -f $hdf5_file ]; then + rm -f $hdf5_file + fi + + PRINT_H5IMPORT $@ + ( + cd $TESTDIR + $RUNSERIAL $H5IMPORT_BIN "$@" + ) + RET=$? + if [ $RET != 0 ] ; then + echo "*FAILED*" + nerrors="`expr $nerrors + 1`" + else + echo " PASSED" + fi + +} + + +############################################################################## +############################################################################## +### T H E T E S T S ### +############################################################################## +############################################################################## +# prepare for test +COPY_TESTFILES_TO_TESTDIR + +####### test for dataset packed bits ###### + +# test failure handling +# Missing file name +TOOLTEST tnofilename-with-packed-bits.ddl --enable-error-stack +# Limits: +# Maximum number of packed bits is 8 (for now). +# Maximum integer size is 64 (for now). +# Maximun Offset is 63 (Maximum size - 1). +# Maximum Offset+Length is 64 (Maximum size). +# Tests: +# Normal operation on both signed and unsigned int datasets. +# Sanity check +# Their rawdata output should be the same. +TOOLTEST tpbitsSignedWhole.ddl --enable-error-stack -d /DS08BITS -M 0,8 packedbits.h5 +TOOLTEST tpbitsUnsignedWhole.ddl --enable-error-stack -d /DU08BITS -M 0,8 packedbits.h5 +TOOLTEST tpbitsSignedIntWhole.ddl --enable-error-stack -d /DS16BITS -M 0,16 packedbits.h5 +TOOLTEST tpbitsUnsignedIntWhole.ddl --enable-error-stack -d /DU16BITS -M 0,16 packedbits.h5 +TOOLTEST tpbitsSignedLongWhole.ddl --enable-error-stack -d /DS32BITS -M 0,32 packedbits.h5 +TOOLTEST tpbitsUnsignedLongWhole.ddl --enable-error-stack -d /DU32BITS -M 0,32 packedbits.h5 +TOOLTEST tpbitsSignedLongLongWhole.ddl --enable-error-stack -d /DS64BITS -M 0,64 packedbits.h5 +TOOLTEST tpbitsUnsignedLongLongWhole.ddl --enable-error-stack -d /DU64BITS -M 0,64 packedbits.h5 +TOOLTEST tpbitsSignedLongLongWhole63.ddl --enable-error-stack -d /DS64BITS -M 0,63 packedbits.h5 +TOOLTEST tpbitsUnsignedLongLongWhole63.ddl --enable-error-stack -d /DU64BITS -M 0,63 packedbits.h5 +TOOLTEST tpbitsSignedLongLongWhole1.ddl --enable-error-stack -d /DS64BITS -M 1,63 packedbits.h5 +TOOLTEST tpbitsUnsignedLongLongWhole1.ddl --enable-error-stack -d /DU64BITS -M 1,63 packedbits.h5 +# Half sections +TOOLTEST tpbitsSigned4.ddl --enable-error-stack -d /DS08BITS -M 0,4,4,4 packedbits.h5 +TOOLTEST tpbitsUnsigned4.ddl --enable-error-stack -d /DU08BITS -M 0,4,4,4 packedbits.h5 +TOOLTEST tpbitsSignedInt8.ddl --enable-error-stack -d /DS16BITS -M 0,8,8,8 packedbits.h5 +TOOLTEST tpbitsUnsignedInt8.ddl --enable-error-stack -d /DU16BITS -M 0,8,8,8 packedbits.h5 +TOOLTEST tpbitsSignedLong16.ddl --enable-error-stack -d /DS32BITS -M 0,16,16,16 packedbits.h5 +TOOLTEST tpbitsUnsignedLong16.ddl --enable-error-stack -d /DU32BITS -M 0,16,16,16 packedbits.h5 +TOOLTEST tpbitsSignedLongLong32.ddl --enable-error-stack -d /DS64BITS -M 0,32,32,32 packedbits.h5 +TOOLTEST tpbitsUnsignedLongLong32.ddl --enable-error-stack -d /DU64BITS -M 0,32,32,32 packedbits.h5 +# Quarter sections +TOOLTEST tpbitsSigned2.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5 +TOOLTEST tpbitsUnsigned2.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,2,4,2,6,2 packedbits.h5 +TOOLTEST tpbitsSignedInt4.ddl --enable-error-stack -d /DS16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5 +TOOLTEST tpbitsUnsignedInt4.ddl --enable-error-stack -d /DU16BITS -M 0,4,4,4,8,4,12,4 packedbits.h5 +TOOLTEST tpbitsSignedLong8.ddl --enable-error-stack -d /DS32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5 +TOOLTEST tpbitsUnsignedLong8.ddl --enable-error-stack -d /DU32BITS -M 0,8,8,8,16,8,24,8 packedbits.h5 +TOOLTEST tpbitsSignedLongLong16.ddl --enable-error-stack -d /DS64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5 +TOOLTEST tpbitsUnsignedLongLong16.ddl --enable-error-stack -d /DU64BITS -M 0,16,16,16,32,16,48,16 packedbits.h5 +# Begin and End +TOOLTEST tpbitsSigned.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,6 packedbits.h5 +TOOLTEST tpbitsUnsigned.ddl --enable-error-stack -d /DU08BITS -M 0,2,2,6 packedbits.h5 +TOOLTEST tpbitsSignedInt.ddl --enable-error-stack -d /DS16BITS -M 0,2,10,6 packedbits.h5 +TOOLTEST tpbitsUnsignedInt.ddl --enable-error-stack -d /DU16BITS -M 0,2,10,6 packedbits.h5 +TOOLTEST tpbitsSignedLong.ddl --enable-error-stack -d /DS32BITS -M 0,2,26,6 packedbits.h5 +TOOLTEST tpbitsUnsignedLong.ddl --enable-error-stack -d /DU32BITS -M 0,2,26,6 packedbits.h5 +TOOLTEST tpbitsSignedLongLong.ddl --enable-error-stack -d /DS64BITS -M 0,2,58,6 packedbits.h5 +TOOLTEST tpbitsUnsignedLongLong.ddl --enable-error-stack -d /DU64BITS -M 0,2,58,6 packedbits.h5 +# Overlapped packed bits. +TOOLTEST tpbitsOverlapped.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,0,3 packedbits.h5 +# Maximum number of packed bits. +TOOLTEST tpbitsMax.ddl --enable-error-stack -d /DS08BITS -M 0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5 +# Compound type. +TOOLTEST tpbitsCompound.ddl --enable-error-stack -d /dset1 -M 0,1,1,1 tcompound.h5 +# Array type. +TOOLTEST tpbitsArray.ddl --enable-error-stack -d /Dataset1 -M 0,1,1,1 tarray1.h5 +# Test Error handling. +# Too many packed bits requested. Max is 8 for now. +TOOLTEST tpbitsMaxExceeded.ddl --enable-error-stack -d /DS08BITS -M 0,1,0,1,1,1,2,1,3,1,4,1,5,1,6,1,7,1 packedbits.h5 +# Offset too large. Max is 7 (8-1) for now. +TOOLTEST tpbitsOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 64,1 packedbits.h5 +TOOLTEST tpbitsCharOffsetExceeded.ddl --enable-error-stack -d /DS08BITS -M 8,1 packedbits.h5 +TOOLTEST tpbitsIntOffsetExceeded.ddl --enable-error-stack -d /DS16BITS -M 16,1 packedbits.h5 +TOOLTEST tpbitsLongOffsetExceeded.ddl --enable-error-stack -d /DS32BITS -M 32,1 packedbits.h5 +# Bad offset, must not be negative. +TOOLTEST tpbitsOffsetNegative.ddl --enable-error-stack -d /DS08BITS -M -1,1 packedbits.h5 +# Bad length, must not be positive. +TOOLTEST tpbitsLengthPositive.ddl --enable-error-stack -d /DS08BITS -M 4,0 packedbits.h5 +# Offset+Length is too large. Max is 8 for now. +TOOLTEST tpbitsLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 37,28 packedbits.h5 +TOOLTEST tpbitsCharLengthExceeded.ddl --enable-error-stack -d /DS08BITS -M 2,7 packedbits.h5 +TOOLTEST tpbitsIntLengthExceeded.ddl --enable-error-stack -d /DS16BITS -M 10,7 packedbits.h5 +TOOLTEST tpbitsLongLengthExceeded.ddl --enable-error-stack -d /DS32BITS -M 26,7 packedbits.h5 +# Incomplete pair of packed bits request. +TOOLTEST tpbitsIncomplete.ddl --enable-error-stack -d /DS08BITS -M 0,2,2,1,0,2,2, packedbits.h5 + + +# Report test results and exit +if test $nerrors -eq 0 ; then + echo "All $TESTNAME tests passed." + exit $EXIT_SUCCESS +else + echo "$TESTNAME tests failed with $nerrors errors." + exit $EXIT_FAILURE +fi |