diff options
Diffstat (limited to 'tools/h5dump')
| -rw-r--r-- | tools/h5dump/Makefile.in | 1442 |
1 files changed, 0 insertions, 1442 deletions
diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in deleted file mode 100644 index a8be644..0000000 --- a/tools/h5dump/Makefile.in +++ /dev/null @@ -1,1442 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# -# Copyright by The HDF Group. -# Copyright by the Board of Trustees of the University of Illinois. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic HDF5 document set and -# is linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -# access to either file, you may request a copy from help@hdfgroup.org. -# -# HDF5 Library Makefile(.in) -# - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -DIST_COMMON = $(top_srcdir)/config/commence.am \ - $(top_srcdir)/config/conclude.am $(srcdir)/Makefile.in \ - $(srcdir)/Makefile.am $(top_srcdir)/bin/mkinstalldirs \ - $(srcdir)/testh5dump.sh.in $(srcdir)/testh5dumppbits.sh.in \ - $(srcdir)/testh5dumpxml.sh.in $(top_srcdir)/bin/depcomp \ - $(top_srcdir)/bin/test-driver -check_PROGRAMS = $(am__EXEEXT_1) binread$(EXEEXT) -bin_PROGRAMS = h5dump$(EXEEXT) -TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) -subdir = tools/h5dump -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \ - $(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/src/H5config.h -CONFIG_CLEAN_FILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -am__EXEEXT_1 = h5dumpgentest$(EXEEXT) -PROGRAMS = $(bin_PROGRAMS) -binread_SOURCES = binread.c -binread_OBJECTS = binread.$(OBJEXT) -binread_LDADD = $(LDADD) -binread_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -am_h5dump_OBJECTS = h5dump.$(OBJEXT) h5dump_ddl.$(OBJEXT) \ - h5dump_xml.$(OBJEXT) -h5dump_OBJECTS = $(am_h5dump_OBJECTS) -h5dump_LDADD = $(LDADD) -h5dump_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5) -h5dump_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(h5dump_LDFLAGS) $(LDFLAGS) -o $@ -h5dumpgentest_SOURCES = h5dumpgentest.c -h5dumpgentest_OBJECTS = h5dumpgentest.$(OBJEXT) -h5dumpgentest_LDADD = $(LDADD) -h5dumpgentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -depcomp = $(SHELL) $(top_srcdir)/bin/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = binread.c $(h5dump_SOURCES) h5dumpgentest.c -DIST_SOURCES = binread.c $(h5dump_SOURCES) h5dumpgentest.c -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -am__tty_colors_dummy = \ - mgn= red= grn= lgn= blu= brg= std=; \ - am__color_tests=no -am__tty_colors = { \ - $(am__tty_colors_dummy); \ - if test "X$(AM_COLOR_TESTS)" = Xno; then \ - am__color_tests=no; \ - elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ - am__color_tests=yes; \ - elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ - am__color_tests=yes; \ - fi; \ - if test $$am__color_tests = yes; then \ - red='[0;31m'; \ - grn='[0;32m'; \ - lgn='[1;32m'; \ - blu='[1;34m'; \ - mgn='[0;35m'; \ - brg='[1m'; \ - std='[m'; \ - fi; \ -} -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__recheck_rx = ^[ ]*:recheck:[ ]* -am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* -am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* -# A command that, given a newline-separated list of test names on the -# standard input, print the name of the tests that are to be re-run -# upon "make recheck". -am__list_recheck_tests = $(AWK) '{ \ - recheck = 1; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - { \ - if ((getline line2 < ($$0 ".log")) < 0) \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ - { \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ - { \ - break; \ - } \ - }; \ - if (recheck) \ - print $$0; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# A command that, given a newline-separated list of test names on the -# standard input, create the global log from their .trs and .log files. -am__create_global_log = $(AWK) ' \ -function fatal(msg) \ -{ \ - print "fatal: making $@: " msg | "cat >&2"; \ - exit 1; \ -} \ -function rst_section(header) \ -{ \ - print header; \ - len = length(header); \ - for (i = 1; i <= len; i = i + 1) \ - printf "="; \ - printf "\n\n"; \ -} \ -{ \ - copy_in_global_log = 1; \ - global_test_result = "RUN"; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".trs"); \ - if (line ~ /$(am__global_test_result_rx)/) \ - { \ - sub("$(am__global_test_result_rx)", "", line); \ - sub("[ ]*$$", "", line); \ - global_test_result = line; \ - } \ - else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ - copy_in_global_log = 0; \ - }; \ - if (copy_in_global_log) \ - { \ - rst_section(global_test_result ": " $$0); \ - while ((rc = (getline line < ($$0 ".log"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".log"); \ - print line; \ - }; \ - printf "\n"; \ - }; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# Restructured Text title. -am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } -# Solaris 10 'make', and several other traditional 'make' implementations, -# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it -# by disabling -e (using the XSI extension "set +e") if it's set. -am__sh_e_setup = case $$- in *e*) set +e;; esac -# Default flags passed to test drivers. -am__common_driver_flags = \ - --color-tests "$$am__color_tests" \ - --enable-hard-errors "$$am__enable_hard_errors" \ - --expect-failure "$$am__expect_failure" -# To be inserted before the command running the test. Creates the -# directory for the log if needed. Stores in $dir the directory -# containing $f, in $tst the test, in $log the log. Executes the -# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and -# passes TESTS_ENVIRONMENT. Set up options for the wrapper that -# will run the test scripts (or their associated LOG_COMPILER, if -# thy have one). -am__check_pre = \ -$(am__sh_e_setup); \ -$(am__vpath_adj_setup) $(am__vpath_adj) \ -$(am__tty_colors); \ -srcdir=$(srcdir); export srcdir; \ -case "$@" in \ - */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ - *) am__odir=.;; \ -esac; \ -test "x$$am__odir" = x"." || test -d "$$am__odir" \ - || $(MKDIR_P) "$$am__odir" || exit $$?; \ -if test -f "./$$f"; then dir=./; \ -elif test -f "$$f"; then dir=; \ -else dir="$(srcdir)/"; fi; \ -tst=$$dir$$f; log='$@'; \ -if test -n '$(DISABLE_HARD_ERRORS)'; then \ - am__enable_hard_errors=no; \ -else \ - am__enable_hard_errors=yes; \ -fi; \ -case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ - am__expect_failure=yes;; \ - *) \ - am__expect_failure=no;; \ -esac; \ -$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) -# A shell command to get the names of the tests scripts with any registered -# extension removed (i.e., equivalently, the names of the test logs, with -# the '.log' extension removed). The result is saved in the shell variable -# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, -# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", -# since that might cause problem with VPATH rewrites for suffix-less tests. -# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. -am__set_TESTS_bases = \ - bases='$(TEST_LOGS)'; \ - bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ - bases=`echo $$bases` -RECHECK_LOGS = $(TEST_LOGS) -AM_RECURSIVE_TARGETS = check recheck -TEST_SUITE_LOG = test-suite.log -LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver -LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) -am__set_b = \ - case '$@' in \ - */*) \ - case '$*' in \ - */*) b='$*';; \ - *) b=`echo '$@' | sed 's/\.log$$//'`; \ - esac;; \ - *) \ - b='$*';; \ - esac -am__test_logs1 = $(TESTS:=.log) -am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) -TEST_LOGS = $(am__test_logs2:.sh.log=.log) -SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver -SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ -AMTAR = @AMTAR@ - -# H5_CFLAGS holds flags that should be used when building hdf5, -# but which should not be exported to h5cc for building other programs. -# AM_CFLAGS is an automake construct which should be used by Makefiles -# instead of CFLAGS, as CFLAGS is reserved solely for the user to define. -# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well. -AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@ - -# Include files in /src directory and /tools/lib directory -AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \ - -I$(top_srcdir)/tools/lib -AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@ -AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ -AM_MAKEFLAGS = @AM_MAKEFLAGS@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BYTESEX = @BYTESEX@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CC_VERSION = @CC_VERSION@ -CFLAGS = @CFLAGS@ -CLEARFILEBUF = @CLEARFILEBUF@ -CODESTACK = @CODESTACK@ -CONFIG_DATE = @CONFIG_DATE@ -CONFIG_MODE = @CONFIG_MODE@ -CONFIG_USER = @CONFIG_USER@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ -CXX_VERSION = @CXX_VERSION@ -CYGPATH_W = @CYGPATH_W@ -DEBUG_PKG = @DEBUG_PKG@ -DEFAULT_API_VERSION = @DEFAULT_API_VERSION@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@ -DIRECT_VFD = @DIRECT_VFD@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -DYNAMIC_DIRS = @DYNAMIC_DIRS@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -EXTERNAL_FILTERS = @EXTERNAL_FILTERS@ - -# Make sure that these variables are exported to the Makefiles -F9XMODEXT = @F9XMODEXT@ -F9XMODFLAG = @F9XMODFLAG@ -F9XSUFFIXFLAG = @F9XSUFFIXFLAG@ -FC = @FC@ -FC2003 = @FC2003@ -FCFLAGS = @FCFLAGS@ -FCFLAGS_f90 = @FCFLAGS_f90@ -FCLIBS = @FCLIBS@ -FC_VERSION = @FC_VERSION@ -FGREP = @FGREP@ -FSEARCH_DIRS = @FSEARCH_DIRS@ -GREP = @GREP@ -H5_CFLAGS = @H5_CFLAGS@ -H5_CPPFLAGS = @H5_CPPFLAGS@ -H5_CXXFLAGS = @H5_CXXFLAGS@ -H5_CXX_SHARED = @H5_CXX_SHARED@ -H5_FCFLAGS = @H5_FCFLAGS@ -H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@ -H5_LDFLAGS = @H5_LDFLAGS@ -H5_LONE_COLON = @H5_LONE_COLON@ -H5_VERSION = @H5_VERSION@ -HADDR_T = @HADDR_T@ -HAVE_DMALLOC = @HAVE_DMALLOC@ -HAVE_FORTRAN_2003 = @HAVE_FORTRAN_2003@ -HAVE_PTHREAD = @HAVE_PTHREAD@ -HDF5_HL = @HDF5_HL@ -HDF5_INTERFACES = @HDF5_INTERFACES@ -HDF_CXX = @HDF_CXX@ -HDF_FORTRAN = @HDF_FORTRAN@ -HDF_FORTRAN2003 = @HDF_FORTRAN2003@ -HID_T = @HID_T@ -HL = @HL@ -HL_FOR = @HL_FOR@ -HSIZE_T = @HSIZE_T@ -HSSIZE_T = @HSSIZE_T@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -INSTRUMENT = @INSTRUMENT@ -INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@ -LARGEFILE = @LARGEFILE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LL_PATH = @LL_PATH@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_STATIC_EXEC = @LT_STATIC_EXEC@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -MPE = @MPE@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PARALLEL = @PARALLEL@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -ROOT = @ROOT@ -RUNPARALLEL = @RUNPARALLEL@ -RUNSERIAL = @RUNSERIAL@ -R_INTEGER = @R_INTEGER@ -R_LARGE = @R_LARGE@ -SEARCH = @SEARCH@ -SED = @SED@ -SETX = @SETX@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SIZE_T = @SIZE_T@ -STATIC_EXEC = @STATIC_EXEC@ -STATIC_SHARED = @STATIC_SHARED@ -STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@ -STRIP = @STRIP@ -TESTPARALLEL = @TESTPARALLEL@ -THREADSAFE = @THREADSAFE@ -TIME = @TIME@ -TR = @TR@ -TRACE_API = @TRACE_API@ -UNAME_INFO = @UNAME_INFO@ -USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@ -USE_FILTER_SZIP = @USE_FILTER_SZIP@ -USINGMEMCHECKER = @USINGMEMCHECKER@ -VERSION = @VERSION@ -WORDS_BIGENDIAN = @WORDS_BIGENDIAN@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -ac_ct_FC = @ac_ct_FC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ - -# Install directories that automake doesn't know about -docdir = $(exec_prefix)/doc -dvidir = @dvidir@ -enable_shared = @enable_shared@ -enable_static = @enable_static@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ - -# Shell commands used in Makefiles -RM = rm -f -CP = cp - -# Some machines need a command to run executables; this is that command -# so that our tests will run. -# We use RUNEXEC instead of RUNSERIAL directly because it may be that -# some tests need to be run with a different command. Older versions -# of the makefiles used the command -# $(LIBTOOL) --mode=execute -# in some directories, for instance. -RUNEXEC = $(RUNSERIAL) - -# Libraries to link to while building -LIBHDF5 = $(top_builddir)/src/libhdf5.la -LIBH5TEST = $(top_builddir)/test/libh5test.la -LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la -LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la -LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la -LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la -LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la -LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la -LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la - -# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below -# has been removed. According to the official description of DESTDIR by Gnu at -# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is -# prepended to the normal and complete install path that it precedes for the -# purpose of installing in a temporary directory which is useful for building -# rpms and other packages. The '/' after ${DESTDIR} will be followed by another -# '/' at the beginning of the normal install path. When DESTDIR is empty the -# path then begins with '//', which is incorrect and causes problems at least for -# Cygwin. - -# Scripts used to build examples -# If only shared libraries have been installed, have h5cc build examples with -# shared libraries instead of static libraries -H5CC = ${DESTDIR}$(bindir)/h5cc -H5CC_PP = ${DESTDIR}$(bindir)/h5pcc -H5FC = ${DESTDIR}$(bindir)/h5fc -H5FC_PP = ${DESTDIR}$(bindir)/h5pfc -H5CPP = ${DESTDIR}$(bindir)/h5c++ -ACLOCAL_AMFLAGS = "-I m4" - -# The trace script; this is used on source files from the C library to -# insert tracing macros. -TRACE = perl $(top_srcdir)/bin/trace - -# .chkexe files are used to mark tests that have run successfully. -# .chklog files are output from those tests. -# *.clog are from the MPE option. - -# Temporary files. *.h5 are generated by h5dumpgentest. They should -# copied to the testfiles/ directory if update is required. -CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.h5 *.bin - -# Test programs and scripts -TEST_PROG = h5dumpgentest -TEST_SCRIPT = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh -check_SCRIPTS = $(TEST_SCRIPT) -SCRIPT_DEPEND = h5dump$(EXEEXT) - -# Add h5dump specific linker flags here -h5dump_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS) - -# All the programs depend on the hdf5 and h5tools libraries -LDADD = $(LIBH5TOOLS) $(LIBHDF5) - -# Source files for the program -h5dump_SOURCES = h5dump.c h5dump_ddl.c h5dump_xml.c -DISTCLEANFILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh - -# Automake needs to be taught how to build lib, progs, and tests targets. -# These will be filled in automatically for the most part (e.g., -# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and -# EXTRA_TEST variables are supplied to allow the user to force targets to -# be built at certain times. -LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ - $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB) - -PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ - $(EXTRA_PROG) - -chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) -TEST_EXTENSIONS = .sh -SH_LOG_COMPILER = $(SHELL) -AM_SH_LOG_FLAGS = -TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) -TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5dump/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign tools/h5dump/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; -$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am: - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -testh5dump.sh: $(top_builddir)/config.status $(srcdir)/testh5dump.sh.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -testh5dumppbits.sh: $(top_builddir)/config.status $(srcdir)/testh5dumppbits.sh.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -testh5dumpxml.sh: $(top_builddir)/config.status $(srcdir)/testh5dumpxml.sh.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - || test -f $$p1 \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list - -clean-checkPROGRAMS: - @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list - -binread$(EXEEXT): $(binread_OBJECTS) $(binread_DEPENDENCIES) $(EXTRA_binread_DEPENDENCIES) - @rm -f binread$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(binread_OBJECTS) $(binread_LDADD) $(LIBS) - -h5dump$(EXEEXT): $(h5dump_OBJECTS) $(h5dump_DEPENDENCIES) $(EXTRA_h5dump_DEPENDENCIES) - @rm -f h5dump$(EXEEXT) - $(AM_V_CCLD)$(h5dump_LINK) $(h5dump_OBJECTS) $(h5dump_LDADD) $(LIBS) - -h5dumpgentest$(EXEEXT): $(h5dumpgentest_OBJECTS) $(h5dumpgentest_DEPENDENCIES) $(EXTRA_h5dumpgentest_DEPENDENCIES) - @rm -f h5dumpgentest$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(h5dumpgentest_OBJECTS) $(h5dumpgentest_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/binread.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump_ddl.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump_xml.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dumpgentest.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -# Recover from deleted '.trs' file; this should ensure that -# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create -# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells -# to avoid problems with "make -n". -.log.trs: - rm -f $< $@ - $(MAKE) $(AM_MAKEFLAGS) $< - -# Leading 'am--fnord' is there to ensure the list of targets does not -# expand to empty, as could happen e.g. with make check TESTS=''. -am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) -am--force-recheck: - @: - -$(TEST_SUITE_LOG): $(TEST_LOGS) - @$(am__set_TESTS_bases); \ - am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ - redo_bases=`for i in $$bases; do \ - am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ - done`; \ - if test -n "$$redo_bases"; then \ - redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ - redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ - if $(am__make_dryrun); then :; else \ - rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ - fi; \ - fi; \ - if test -n "$$am__remaking_logs"; then \ - echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ - "recursion detected" >&2; \ - else \ - am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ - fi; \ - if $(am__make_dryrun); then :; else \ - st=0; \ - errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ - for i in $$redo_bases; do \ - test -f $$i.trs && test -r $$i.trs \ - || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ - test -f $$i.log && test -r $$i.log \ - || { echo "$$errmsg $$i.log" >&2; st=1; }; \ - done; \ - test $$st -eq 0 || exit 1; \ - fi - @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ - ws='[ ]'; \ - results=`for b in $$bases; do echo $$b.trs; done`; \ - test -n "$$results" || results=/dev/null; \ - all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ - pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ - fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ - skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ - xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ - xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ - error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ - if test `expr $$fail + $$xpass + $$error` -eq 0; then \ - success=true; \ - else \ - success=false; \ - fi; \ - br='==================='; br=$$br$$br$$br$$br; \ - result_count () \ - { \ - if test x"$$1" = x"--maybe-color"; then \ - maybe_colorize=yes; \ - elif test x"$$1" = x"--no-color"; then \ - maybe_colorize=no; \ - else \ - echo "$@: invalid 'result_count' usage" >&2; exit 4; \ - fi; \ - shift; \ - desc=$$1 count=$$2; \ - if test $$maybe_colorize = yes && test $$count -gt 0; then \ - color_start=$$3 color_end=$$std; \ - else \ - color_start= color_end=; \ - fi; \ - echo "$${color_start}# $$desc $$count$${color_end}"; \ - }; \ - create_testsuite_report () \ - { \ - result_count $$1 "TOTAL:" $$all "$$brg"; \ - result_count $$1 "PASS: " $$pass "$$grn"; \ - result_count $$1 "SKIP: " $$skip "$$blu"; \ - result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ - result_count $$1 "FAIL: " $$fail "$$red"; \ - result_count $$1 "XPASS:" $$xpass "$$red"; \ - result_count $$1 "ERROR:" $$error "$$mgn"; \ - }; \ - { \ - echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ - $(am__rst_title); \ - create_testsuite_report --no-color; \ - echo; \ - echo ".. contents:: :depth: 2"; \ - echo; \ - for b in $$bases; do echo $$b; done \ - | $(am__create_global_log); \ - } >$(TEST_SUITE_LOG).tmp || exit 1; \ - mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ - if $$success; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ - fi; \ - echo "$${col}$$br$${std}"; \ - echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ - echo "$${col}$$br$${std}"; \ - create_testsuite_report --maybe-color; \ - echo "$$col$$br$$std"; \ - if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ - if test -n "$(PACKAGE_BUGREPORT)"; then \ - echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ - fi; \ - echo "$$col$$br$$std"; \ - fi; \ - $$success || exit 1 -recheck: all $(check_PROGRAMS) $(check_SCRIPTS) - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - bases=`for i in $$bases; do echo $$i; done \ - | $(am__list_recheck_tests)` || exit 1; \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - log_list=`echo $$log_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ - am__force_recheck=am--force-recheck \ - TEST_LOGS="$$log_list"; \ - exit $$? -h5dumpgentest.log: h5dumpgentest$(EXEEXT) - @p='h5dumpgentest$(EXEEXT)'; \ - b='h5dumpgentest'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -.sh.log: - @p='$<'; \ - $(am__set_b); \ - $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -@am__EXEEXT_TRUE@.sh$(EXEEXT).log: -@am__EXEEXT_TRUE@ @p='$<'; \ -@am__EXEEXT_TRUE@ $(am__set_b); \ -@am__EXEEXT_TRUE@ $(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \ -@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ -@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \ -@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile $(PROGRAMS) all-local -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) - -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) - -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ - clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool mostlyclean-local - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: check-am install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \ - check-am clean clean-binPROGRAMS clean-checkPROGRAMS \ - clean-generic clean-libtool cscopelist-am ctags ctags-am \ - distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \ - pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \ - uninstall-binPROGRAMS - - -# List all build rules defined by HDF5 Makefiles as "PHONY" targets here. -# This tells the Makefiles that these targets are not files to be built but -# commands that should be executed even if a file with the same name already -# exists. -.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \ - build-tests check-clean check-install check-p check-s check-vfd \ - install-doc lib progs tests uninstall-doc _exec_check-s _test help - -help: - @$(top_srcdir)/bin/makehelp - -# lib/progs/tests targets recurse into subdirectories. build-* targets -# build files in this directory. -build-lib: $(LIB) -build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(chk_TESTS) - -# General rule for recursive building targets. -# BUILT_SOURCES contain targets that need to be built before anything else -# in the directory (e.g., for Fortran type detection) -lib progs tests check-s check-p :: $(BUILT_SOURCES) - @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; - @for d in X $(SUBDIRS); do \ - if test $$d != X && test $$d != .; then \ - (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ - fi; \ - done - -# General rule for recursive cleaning targets. Like the rule above, -# but doesn't require building BUILT_SOURCES. -check-clean :: - @$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1; - @for d in X $(SUBDIRS); do \ - if test $$d != X && test $$d != .; then \ - (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1; \ - fi; \ - done - -# Tell Automake to build tests when the user types `make all' (this is -# not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since -# Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) - -# make install-doc doesn't do anything outside of doc directory, but -# Makefiles should recognize it. -# UPDATE: docs no longer reside in this build tree, so this target -# is depreciated. -install-doc uninstall-doc: - @echo "Nothing to be done." - -# clean up files generated by tests so they can be re-run. -build-check-clean: - $(RM) -rf $(CHECK_CLEANFILES) - -# run check-clean whenever mostlyclean is run -mostlyclean-local: build-check-clean - -# check-install is just a synonym for installcheck -check-install: installcheck - -# Run each test in order, passing $(TEST_FLAGS) to the program. -# Since tests are done in a shell loop, "make -i" does apply inside it. -# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. -# The timestamps give a rough idea how much time the tests use. -# -# Note that targets in chk_TESTS (defined above) will be built when the user -# types 'make tests' or 'make check', but only programs in TEST_PROG, -# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. -check-TESTS: test - -test _test: - @$(MAKE) build-check-s - @$(MAKE) build-check-p - -# Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(chk_TESTS) - @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ - echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ - fi - @$(MAKE) $(AM_MAKEFLAGS) _exec_check-s - @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ - echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ - fi - -_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) - -# The dummy.chkexe here prevents the target from being -# empty if there are no tests in the current directory. -# $${log} is the log file. -# $${tname} is the name of test. -$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: - @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ - tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.chklog); \ - echo "============================"; \ - if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ - echo "No need to test $${tname} again."; \ - else \ - echo "============================" > $${log}; \ - if test "X$(FORTRAN_API)" = "Xyes"; then \ - echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - elif test "X$(CXX_API)" = "Xyes"; then \ - echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\ - else \ - echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \ - echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - fi; \ - echo "============================" >> $${log}; \ - srcdir="$(srcdir)" \ - $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch $(@:.chkexe_=.chkexe) || \ - (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ - (cat $${log} && false) || exit 1; \ - echo "" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ - echo "============================" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)"; \ - cat $${log}; \ - fi; \ - fi - -# The dummysh.chkexe here prevents the target from being -# empty if there are no tests in the current directory. -# $${log} is the log file. -# $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: - @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ - cmd=$(@:.chkexe_=);\ - tname=`basename $$cmd`;\ - chkname=`basename $(@:.chkexe_=.chkexe)`;\ - log=`basename $(@:.chkexe_=.chklog)`; \ - echo "============================"; \ - if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \ - echo "No need to test $${tname} again."; \ - else \ - echo "============================" > $${log}; \ - if test "X$(FORTRAN_API)" = "Xyes"; then \ - echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \ - echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - elif test "X$(CXX_API)" = "Xyes"; then \ - echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \ - echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - else \ - echo "Testing $${tname} $(TEST_FLAGS)"; \ - echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \ - fi; \ - echo "============================" >> $${log}; \ - RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ - srcdir="$(srcdir)" \ - $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch $${chkname} || \ - (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ - (cat $${log} && false) || exit 1; \ - echo "" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \ - echo "============================" >> $${log}; \ - echo "Finished testing $${tname} $(TEST_FLAGS)"; \ - cat $${log}; \ - fi; \ - echo "============================"; \ - fi - -# Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(chk_TESTS) - @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ - echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ - fi - @if test -n "$(TEST_PROG_PARA)"; then \ - echo "**** Hint ****"; \ - echo "Parallel test files reside in the current directory" \ - "by default."; \ - echo "Set HDF5_PARAPREFIX to use another directory. E.g.,"; \ - echo " HDF5_PARAPREFIX=/PFS/user/me"; \ - echo " export HDF5_PARAPREFIX"; \ - echo " make check"; \ - echo "**** end of Hint ****"; \ - fi - @for test in $(TEST_PROG_PARA) dummy; do \ - if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \ - RUNEXEC="$(RUNPARALLEL)" || exit 1; \ - fi; \ - done - @for test in $(TEST_SCRIPT_PARA) dummy; do \ - if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \ - fi; \ - done - @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ - echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\ - fi - -# Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(chk_TESTS) - @for vfd in $(VFD_LIST) dummy; do \ - if test $$vfd != dummy; then \ - echo "============================"; \ - echo "Testing Virtual File Driver $$vfd"; \ - echo "============================"; \ - $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1; \ - HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1; \ - fi; \ - done - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: |