summaryrefslogtreecommitdiffstats
path: root/tools/h5format_convert/testh5fc.sh.in
diff options
context:
space:
mode:
Diffstat (limited to 'tools/h5format_convert/testh5fc.sh.in')
-rw-r--r--tools/h5format_convert/testh5fc.sh.in505
1 files changed, 0 insertions, 505 deletions
diff --git a/tools/h5format_convert/testh5fc.sh.in b/tools/h5format_convert/testh5fc.sh.in
deleted file mode 100644
index 0d74697..0000000
--- a/tools/h5format_convert/testh5fc.sh.in
+++ /dev/null
@@ -1,505 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5format_convert tool
-#
-#
-
-srcdir=@srcdir@
-
-# Determine which filters are available
-USE_FILTER_SZIP="@USE_FILTER_SZIP@"
-USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
-USE_FILTER_SHUFFLE="@USE_FILTER_SHUFFLE@"
-USE_FILTER_FLETCHER32="@USE_FILTER_FLETCHER32@"
-USE_FILTER_NBIT="@USE_FILTER_NBIT@"
-USE_FILTER_SCALEOFFSET="@USE_FILTER_SCALEOFFSET@"
-
-TESTNAME=h5format_convert
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-FORMCONV=h5format_convert # The tool name
-FORMCONV_BIN=`pwd`/$FORMCONV # The path of the tool binary
-
-CHK_IDX=h5fc_chk_idx # The program name
-CHK_IDX_BIN=`pwd`/$CHK_IDX # The program to verify the chunk indexing type is v1 B-tree
-
-RM='rm -rf'
-CMP='cmp -s'
-DIFF='diff -c'
-CP='cp'
-H5DUMP=../h5dump/h5dump # The h5dump tool name
-H5DUMP_BIN=`pwd`/$H5DUMP # The path of the h5dump tool binary
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-nerrors=0
-verbose=yes
-
-# source dirs
-SRC_TOOLS="$srcdir/.."
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-
-# testfiles source dirs for tools
-SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
-SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
-SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
-SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
-SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
-SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
-SRC_H5FORMCONV_TESTFILES="$SRC_TOOLS/h5format_convert/testfiles"
-
-TESTDIR=./testfiles
-test -d $TESTDIR || mkdir $TESTDIR
-
-# Copy the testfile to a temporary file for testing as h5format_convert is changing the file in place
-TMPOUTFILE=outtmp.h5
-TMPFILE=tmp.h5
-TMPCHKFILE=chktmp.h5
-TMPDMPFILE=dmptmp.h5
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-# Any test files from other tools can be used in this framework.
-# This list are also used for checking exist.
-# Comment '#' without space can be used.
-# --------------------------------------------------------------------
-LIST_HDF5_TEST_FILES="
-$SRC_H5FORMCONV_TESTFILES/h5fc_non_v3.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_edge_v3.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext_none.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext_none.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_i.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_s.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_f.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_if.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_is.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_sf.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext3_isf.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_i.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_s.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_f.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_if.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_is.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_sf.h5
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext3_isf.h5
-$SRC_H5FORMCONV_TESTFILES/h5fc_err_level.h5
-"
-
-LIST_OTHER_TEST_FILES="
-$SRC_H5FORMCONV_TESTFILES/h5fc_help.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_nooption.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_nonexistfile.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_d_file.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_dname.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_nonexistdset_file.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_v_non_chunked.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_v_bt1.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_v_ndata_bt1.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_v_all.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_v_n_1d.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_v_n_all.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_i.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_s.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext1_f.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_if.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_is.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext2_sf.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_ext3_isf.ddl
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_i.ddl
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_s.ddl
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext1_f.ddl
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_if.ddl
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_is.ddl
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext2_sf.ddl
-$SRC_H5FORMCONV_TESTFILES/old_h5fc_ext3_isf.ddl
-$SRC_H5FORMCONV_TESTFILES/h5fc_v_err.ddl
-"
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
- # copy test files. Used -f to make sure get a new copy
- for tstfile in $COPY_TESTFILES
- do
- # ignore '#' comment
- echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
- RET=$?
- if [ $RET -eq 1 ]; then
- # skip cp if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=`$DIRNAME $tstfile`
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $CP -f $tstfile $TESTDIR
- if [ $? -ne 0 ]; then
- echo "Error: FAILED to copy $tstfile ."
-
- # Comment out this to CREATE expected file
- exit $EXIT_FAILURE
- fi
- fi
- fi
- done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
- # skip rm if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=$SRC_H5FORMCONV_TESTFILES
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $RM $TESTDIR
- else
- $RM $TESTDIR/$TMPFILE
- fi
-}
-
-# Print a line-line message left justified in a field of 80 characters
-# beginning with the word "Testing".
-#
-TESTING() {
- SPACES=" "
- echo "Testing $* $SPACES" | cut -c1-80 | tr -d '\012'
-}
-
-# Run a test and print PASS or *FAIL*. If a test fails then increment
-# the `nerrors' global variable and (if $verbose is set) display the
-# difference between the actual output and the expected output. The
-# expected output is given as the first argument to this function and
-# the actual output file is calculated by replacing the `.ddl' with
-# `.out'. The actual output is not removed if $HDF5_NOCLEANUP has a
-# non-zero value.
-#
-# $1: expected output
-# $2: the test file name
-# --fname might be empty or fname does not exist
-# --fname is copied to a temporary file for testing
-# $3 to at most $6--options to the tool such as:
-# -d dname or --dname=dname
-# -v or --verbose
-# -n or --noop
-TOOLTEST_OUT() {
- # Prepare expected and actual output
- expect="$TESTDIR/$1"
- actual="$TESTDIR/`basename $1 .ddl`.out"
- actual_err="$TESTDIR/`basename $1 .ddl`.err"
- actual_sav=${actual}-sav
- actual_err_sav=${actual_err}-sav
-
- # Prepare the test file
- $RM $TESTDIR/$TMPOUTFILE
- TFILE=$2
- if [ ! -z "$2" ] && [ -e $TESTDIR/$2 ] ; then
- $CP $TESTDIR/$2 $TESTDIR/$TMPOUTFILE
- TFILE=$TMPOUTFILE
- fi
-
- # Run test.
- TESTING $FORMCONV $3 $4 $5 $6 $2
- (
- cd $TESTDIR
- $RUNSERIAL $FORMCONV_BIN $3 $4 $5 $6 $TFILE
- ) >$actual 2>$actual_err
- cp $actual $actual_sav
- cp $actual_err $actual_err_sav
- cat $actual_err >> $actual
-
- # Compare output
- COMPARE_OUT $expect $actual
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- $RM $actual $actual_err
- $RM $actual $actual_err $actual_sav $actual_err_sav
- fi
-}
-
-# To check that the tool exits success, no output
-# Assume all short options
-# $1 is the test file name
-# --fname exists
-# --fname is copied to a temporary file for testing
-# $2 is the temporary file name
-# $3 to at most $5--options to the tool such as:
-# -d dname
-# -n
-TOOLTEST() {
- TESTING $FORMCONV $3 $4 $5 $1
- $RM $TESTDIR/$2
- $CP $TESTDIR/$1 $TESTDIR/$2
- $RUNSERIAL $FORMCONV_BIN $3 $4 $5 $TESTDIR/$2
- exitcode=$?
- if [ $exitcode -ne 0 ]; then
- echo "*FAILED*"
- echo " The tool exits failure"
- nerrors="`expr $nerrors + 1`"
- else
- echo " PASSED"
- fi
-}
-
-CHECKING() {
- SPACES=" "
- echo "Verifying $* $SPACES" | cut -c1-80 | tr -d '\012'
-}
-
-# Assume $TESTDIR/$TMPFILE is the converted test file
-# $1 dataset name
-IDX_CHECK() {
- CHECKING $1
- $RUNSERIAL $CHK_IDX_BIN $TESTDIR/$TMPCHKFILE $1
- ret=$?
- if [ $ret -eq 0 ]; then
- echo " PASSED"
- else
- echo "*FAILED*"
- echo " The chunk indexing type is not correct"
- nerrors="`expr $nerrors + 1`"
- fi
-}
-
-# $1 is the expected output
-# $2 is the output from testing
-COMPARE_OUT() {
- if $CMP $1 $2; then
- echo " PASSED"
- else
- echo "*FAILED*"
- echo " Expected result (*.ddl) differs from actual result (*.out)"
- nerrors="`expr $nerrors + 1`"
- test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
- fi
-}
-
-# Assume $TESTDIR/$TMPFILE is the converted test file
-# $1 is the test file for verifying h5dump output
-# $2 is the expected output from h5dump
-H5DUMP_CHECK() {
- CHECKING h5dump output for $1
- expect="$TESTDIR/$2"
- actual="$TESTDIR/`basename $2 .ddl`.out"
- actual_err="$TESTDIR/`basename $2 .ddl`.err"
- $RUNSERIAL $H5DUMP_BIN -BH $TESTDIR/$TMPDMPFILE > $actual 2>$actual_err
- cat $actual_err >> $actual
-
- # Compare output
- COMPARE_OUT $expect $actual
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- $RM $actual $actual_err
- fi
-}
-
-# Print a "SKIP" message
-SKIP() {
- TESTING $STAT $@
- echo " -SKIP-"
-}
-
-
-
-##############################################################################
-##############################################################################
-### T H E T E S T S ###
-##############################################################################
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-#
-#
-#
-# h5format_convert --help
-# h5format_convert (no options)
-# h5format_convert nonexist.h5 (no options, file does not exist)
-TOOLTEST_OUT h5fc_help.ddl '' --help
-TOOLTEST_OUT h5fc_nooption.ddl ''
-TOOLTEST_OUT h5fc_nonexistfile.ddl nonexist.h5
-#
-#
-# h5format_convert -d old_h5fc_ext_none.h5 (just -d option, file exists)
-# h5format_convert --dname old_h5fc_ext_none.h5 (just --dname option, file exists)
-# h5format_convert --dname (just --dname option)
-# h5format_convert --dname=nonexist old_h5fc_ext_none.h5 (dataset does not exist, file exists)
-TOOLTEST_OUT h5fc_d_file.ddl old_h5fc_ext_none.h5 -d
-TOOLTEST_OUT h5fc_d_file.ddl old_h5fc_ext_none.h5 --dname
-TOOLTEST_OUT h5fc_dname.ddl '' --dname
-TOOLTEST_OUT h5fc_nonexistdset_file.ddl old_h5fc_ext_none.h5 --dname=nonexist
-#
-#
-#
-# h5format_convert -d /DSET_CONTIGUOUS -v old_h5fc_ext_none.h5 (verbose, contiguous dataset)
-# h5format_convert -d /GROUP/DSET_BT2 --verbose old_h5fc_ext_none.h5 (verbose, bt1 dataset)
-# h5format_convert -d /DSET_NDATA_BT2 -v -n old_h5fc_ext_none.h5 (verbose, noop, bt1+nodata dataset)
-# h5format_convert -v old_h5fc_ext_none.h5 (verbose, all datasets)
-TOOLTEST_OUT h5fc_v_non_chunked.ddl old_h5fc_ext_none.h5 -d /DSET_CONTIGUOUS -v
-TOOLTEST_OUT h5fc_v_bt1.ddl old_h5fc_ext_none.h5 -d /GROUP/DSET_BT2 --verbose
-TOOLTEST_OUT h5fc_v_ndata_bt1.ddl old_h5fc_ext_none.h5 -d /DSET_NDATA_BT2 -v -n
-TOOLTEST_OUT h5fc_v_all.ddl old_h5fc_ext_none.h5 -v
-#
-#
-#
-# h5format_convert -d /DSET_EA -v -n h5fc_ext_none.h5 (verbose, noop, one ea dataset)
-# h5format_convert -v -n h5fc_non_v3.h5 (verbose, noop, all datasets)
-TOOLTEST_OUT h5fc_v_n_1d.ddl h5fc_ext_none.h5 -d /DSET_EA -v -n
-TOOLTEST_OUT h5fc_v_n_all.ddl h5fc_non_v3.h5 -v -n
-#
-#
-#
-# h5format_convert -v h5fc_err_level.h5 (error encountered in converting the dataset)
-TOOLTEST_OUT h5fc_v_err.ddl h5fc_err_level.h5 -v
-#
-#
-#
-# No output from tests
-# 1) Use the tool to convert the dataset
-# 2) Verify the chunk indexing type is correct
-# h5format_convert -d /DSET_EA h5fc_ext_none.h5
-# h5format_convert -d /GROUP/DSET_NDATA_EA h5fc_ext_none.h5
-# h5format_convert -d /GROUP/DSET_BT2 h5fc_ext_none.h5
-# h5format_convert -d /DSET_NDATA_BT2 h5fc_ext_none.h5
-# h5format_convert -d /DSET_FA h5fc_ext_none.h5
-# h5format_convert -d /GROUP/DSET_FA h5fc_ext_none.h5
-# h5format_convert -d /DSET_NONE h5fc_ext_none.h5
-# h5format_convert -d /GROUP/DSET_NDATA_NONE h5fc_ext_none.h5
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_EA
-IDX_CHECK /DSET_EA
-#
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_NDATA_EA
-IDX_CHECK /GROUP/DSET_NDATA_EA
-#
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_BT2
-IDX_CHECK /GROUP/DSET_BT2
-#
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_NDATA_BT2
-IDX_CHECK /DSET_NDATA_BT2
-#
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_FA
-IDX_CHECK /DSET_FA
-#
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_NDATA_FA
-IDX_CHECK /GROUP/DSET_NDATA_FA
-#
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /DSET_NONE
-IDX_CHECK /DSET_NONE
-#
-TOOLTEST h5fc_ext_none.h5 $TMPCHKFILE -d /GROUP/DSET_NDATA_NONE
-IDX_CHECK /GROUP/DSET_NDATA_NONE
-#
-#
-#
-# No output from tests: just check exit code
-# h5format_convert -d /DSET_NDATA_BT2 old_h5fc_ext_none.h5 (v1-btree dataset)
-# h5format_convert -d /DSET_CONTIGUOUS h5fc_non_v3.h5 (non-chunked dataset)
-TOOLTEST old_h5fc_ext_none.h5 $TMPFILE -d /DSET_NDATA_BT2
-TOOLTEST h5fc_non_v3.h5 $TMPFILE -d /DSET_CONTIGUOUS
-#
-#
-#
-# No output from tests: just check exit code
-# h5format_convert -d /GROUP/DSET_BT2 -n h5fc_non_v3.h5 (noop, one dataset)
-# h5format_convert -n h5fc_non_v3.h5 (noop, all datasets)
-TOOLTEST h5fc_non_v3.h5 $TMPFILE -d /GROUP/DSET_BT2 -n
-TOOLTEST h5fc_non_v3.h5 $TMPFILE -n
-#
-#
-#
-# No output from tests: just check exit code
-# h5format_convert h5fc_non_v3.h5
-# 1) convert all datasets
-# 2) verify indexing types
-TOOLTEST h5fc_non_v3.h5 $TMPCHKFILE
-IDX_CHECK /DSET_NDATA_EA
-IDX_CHECK /DSET_NDATA_BT2
-IDX_CHECK /GROUP/DSET_BT2
-IDX_CHECK /GROUP/DSET_EA
-#
-#
-#
-# No output from test: just check exit code
-# h5format_convert h5fc_edge_v3.h5
-# 1) convert the chunked dataset (filter, no-filter-edge-chunk)
-# 2) verify the indexing type
-TOOLTEST h5fc_edge_v3.h5 $TMPCHKFILE
-IDX_CHECK /DSET_EDGE
-#
-#
-
-# The following test files have messages in the superblock extension.
-# Verify h5dump output for correctness after conversion
-TOOLTEST h5fc_ext1_i.h5 $TMPDMPFILE
-H5DUMP_CHECK h5fc_ext1_i.h5 h5fc_ext1_i.ddl
-TOOLTEST h5fc_ext1_s.h5 $TMPDMPFILE
-H5DUMP_CHECK h5fc_ext1_s.h5 h5fc_ext1_s.ddl
-TOOLTEST h5fc_ext1_f.h5 $TMPDMPFILE
-H5DUMP_CHECK h5fc_ext1_f.h5 h5fc_ext1_f.ddl
-#
-TOOLTEST h5fc_ext2_if.h5 $TMPDMPFILE
-H5DUMP_CHECK h5fc_ext2_if.h5 h5fc_ext2_if.ddl
-TOOLTEST h5fc_ext2_is.h5 $TMPDMPFILE
-H5DUMP_CHECK h5fc_ext2_is.h5 h5fc_ext2_is.ddl
-TOOLTEST h5fc_ext2_sf.h5 $TMPDMPFILE
-H5DUMP_CHECK h5fc_ext2_sf.h5 h5fc_ext2_sf.ddl
-#
-TOOLTEST h5fc_ext3_isf.h5 $TMPDMPFILE
-H5DUMP_CHECK h5fc_ext3_isf.h5 h5fc_ext3_isf.ddl
-#
-#
-#
-TOOLTEST old_h5fc_ext1_i.h5 $TMPDMPFILE
-H5DUMP_CHECK old_h5fc_ext1_i.h5 old_h5fc_ext1_i.ddl
-TOOLTEST old_h5fc_ext1_s.h5 $TMPDMPFILE
-H5DUMP_CHECK old_h5fc_ext1_s.h5 old_h5fc_ext1_s.ddl
-TOOLTEST old_h5fc_ext1_f.h5 $TMPDMPFILE
-H5DUMP_CHECK old_h5fc_ext1_f.h5 old_h5fc_ext1_f.ddl
-#
-TOOLTEST old_h5fc_ext2_if.h5 $TMPDMPFILE
-H5DUMP_CHECK old_h5fc_ext2_if.h5 old_h5fc_ext2_if.ddl
-TOOLTEST old_h5fc_ext2_is.h5 $TMPDMPFILE
-H5DUMP_CHECK old_h5fc_ext2_is.h5 old_h5fc_ext2_is.ddl
-TOOLTEST old_h5fc_ext2_sf.h5 $TMPDMPFILE
-H5DUMP_CHECK old_h5fc_ext2_sf.h5 old_h5fc_ext2_sf.ddl
-#
-TOOLTEST old_h5fc_ext3_isf.h5 $TMPDMPFILE
-H5DUMP_CHECK old_h5fc_ext3_isf.h5 old_h5fc_ext3_isf.ddl
-#
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-if test $nerrors -eq 0 ; then
- echo "All $TESTNAME tests passed."
- exit $EXIT_SUCCESS
-else
- echo "$TESTNAME tests failed with $nerrors errors."
- exit $EXIT_FAILURE
-fi
-
generated by cgit v0.12 at 2024-07-20 05:20:12 (GMT)