summaryrefslogtreecommitdiffstats
path: root/tools/h5jam/testh5jam.sh.in
diff options
context:
space:
mode:
Diffstat (limited to 'tools/h5jam/testh5jam.sh.in')
-rw-r--r--tools/h5jam/testh5jam.sh.in699
1 files changed, 0 insertions, 699 deletions
diff --git a/tools/h5jam/testh5jam.sh.in b/tools/h5jam/testh5jam.sh.in
deleted file mode 100644
index d8c9274..0000000
--- a/tools/h5jam/testh5jam.sh.in
+++ /dev/null
@@ -1,699 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5jam/h5unjam tools
-
-srcdir=@srcdir@
-
-# Determine which filters are available
-USE_FILTER_SZIP="@USE_FILTER_SZIP@"
-USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
-
-TESTNAME=h5jam/h5unjam
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-DUMPER=h5dump # The dumper to use
-DUMPER_BIN=`pwd`/../$DUMPER # The path of the dumper binary
-JAM=h5jam # Tool to test
-UNJAM=h5unjam # Tool to test
-JAM_BIN="$RUNSERIAL "`pwd` # The path of the jam binary
-UNJAM_BIN=`pwd` # The path of the jam binary
-
-RM='rm -rf'
-CMP='cmp -s'
-DIFF='diff -c'
-AWK='awk'
-CP='cp'
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-nerrors=0
-verbose=yes
-
-# source dirs
-SRC_TOOLS="$srcdir/.."
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-
-# testfiles source dirs for tools
-SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
-SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
-SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
-SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
-SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
-SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
-
-TESTDIR=./testfiles
-test -d $TESTDIR || mkdir $TESTDIR
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-# Any test files from other tools can be used in this framework.
-# This list are also used for checking exist.
-# Comment '#' without space can be used.
-# --------------------------------------------------------------------
-LIST_HDF5_TEST_FILES="
-$SRC_H5JAM_TESTFILES/tall.h5
-$SRC_H5JAM_TESTFILES/twithub.h5
-$SRC_H5JAM_TESTFILES/twithub513.h5
-"
-LIST_OTHER_TEST_FILES="
-$SRC_H5JAM_TESTFILES/u10.txt
-$SRC_H5JAM_TESTFILES/u511.txt
-$SRC_H5JAM_TESTFILES/u512.txt
-$SRC_H5JAM_TESTFILES/u513.txt
-$SRC_H5JAM_TESTFILES/h5jam-help.txt
-$SRC_H5JAM_TESTFILES/h5unjam-help.txt
-$SRC_H5JAM_TESTFILES/h5jam-ub-nohdf5.txt
-"
-
-# Source in the output filter function definitions.
-. $srcdir/../../bin/output_filter.sh
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
- # copy test files. Used -f to make sure get a new copy
- for tstfile in $COPY_TESTFILES
- do
- # ignore '#' comment
- echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
- RET=$?
- if [ $RET -eq 1 ]; then
- # skip cp if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=`$DIRNAME $tstfile`
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $CP -f $tstfile $TESTDIR
- if [ $? -ne 0 ]; then
- echo "Error: FAILED to copy $tstfile ."
-
- # Comment out this to CREATE expected file
- exit $EXIT_FAILURE
- fi
- fi
- fi
- done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
- # skip rm if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=$SRC_H5JAM_TESTFILES
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $RM $TESTDIR
- fi
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-#
-TESTING() {
- SPACES=" "
- echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Compare".
-#
-COMPARE() {
- SPACES=" "
- echo "Compare $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Print a "SKIP" message
-SKIP() {
- TESTING $JAM $@
- echo " -SKIP-"
-}
-
-#
-# COMPARE_FILES a.h5 b.h5
-# Compare two files, skipping the first line. This is used to
-# compare the output of the dumper, skipping the file name which
-# is different.
-# The result is stored in 'compval'.
-#
-cmpval=0;
-COMPARE_FILES() {
- $AWK 'NR > 1' $1 > $1.cmp
- $AWK 'NR > 1' $2 > $2.cmp
- $CMP $1.cmp $2.cmp
- cmpval=$?
- rm -f $1.cmp $2.cmp
-}
-
-# CLEANUP files
-# Clean up named files.
-CLEANUP() {
- if test -z "$HDF5_NOCLEANUP"; then
- for i in $*
- do
- rm -f $i
- done
- fi
-}
-
-# SETUP file tocopy
-# Clone a standard input file in the test directory
-# Modification:
-# Was using "cp" command which means file $2 will inherit the permission
-# setting of file $1. If $1 is read-only, so will $2. That will cause
-# failure when the test attempts to write it later on. Changed to use
-# the "cat" command.
-#
-SETUP() {
- cat < $1 > $2
-}
-
-#
-# CHECKFILE orig.h5 compar.h5
-# Check that the test file is the same as an original.
-# The two files are dumped with the dumper, and the output
-# compared with COMPARE_FILES.
-# If the files are the same, the test reports " PASSED",
-# otherwise, it reports "*FAILED*"
-CHECKFILE() {
- expected="`dirname $2`/`basename $2 .h5`.out"
- expected_err="`dirname $2`/`basename $2 .h5`.err"
- actual="`basename $1 .h5`.out"
- actual_err="`basename $1 .h5`.err"
-
- $RUNSERIAL $DUMPER_BIN/$DUMPER $1 >$expected 2>$expected_err
- cat $expected_err >> $expected
-
- # dump the test file
- COMPARE $2 to $1
- $RUNSERIAL $DUMPER_BIN/$DUMPER $2 >$actual 2>$actual_err
- cat $actual_err >> $actual
-
- # compare the two files (ignore line 1)
- COMPARE_FILES $actual $expected
- if [ "$cmpval" = 0 ] ; then
- echo " PASSED"
- else
- echo "*FAILED*"
- echo " Expected result (*.ddl) differs from actual result (*.out)"
- nerrors="`expr $nerrors + 1`"
- test yes = "$verbose" && $DIFF $expected $actual |sed 's/^/ /'
- fi
-
- # Clean up output files
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actual $actual_err
- rm -f $expected $expected_err
- fi
-}
-
-#
-# CHECK_UB file.h5 user_block_file origfile.h5
-#
-# Check the user block in 'file.h5' is the same as
-# 'user_block' (allowing for padding).
-#
-# If the original file had a user block before the test
-# then 'compare.h5' is passed. The user block must be extracted
-# and the test file compared to:
-# cat compare_ub user_block_file.
-#
-# This test uses './getub' to extract the user block from
-# 'file.h5', which is compared to the file described above.
-#
-# The result is set in variable 'result1'.
-#
-result1=0;
-CHECK_UB_1() {
- hfile="$1"
- ufile="$2"
-
- # check for third argument (the original file)
- origfile="";
- if [ -n "$3" ];
- then
- origfile="$3"
- fi
-
- # find the length of the user block to check
- s1=`cat $ufile | wc -c | sed -e 's/ //g'`
- if [ "$s1" = "0" ];
- then
- echo "File "$ufile" is empty"
- result1=1;
- fi
-
- # Get the size of the original user block, if any.
- if [ -n "$origfile" ];
- then
- # 'tellub' calls H5Fget_user_block to get the size
- # of the user block
- s2=`$JAM_BIN/tellub $origfile`
- if [ "$s2" = "0" ];
- then
- size=$s1;
- cmpfile=$ufile
- else
- cmpfile="tt2"
- size=`expr $s2 + $s1`
- $JAM_BIN/getub -c $s2 $origfile > $cmpfile
- cat $ufile >> $cmpfile
- fi
- else
- # assume no user block
- s2="0"
- size=$s1;
- cmpfile=$ufile
- fi
-
- # Extract 'size' bytes from the front of 'hfile'
- # Compare to 'cmpfile', result is set in result1
- tfile="tt1"
- $JAM_BIN/getub -c $size $hfile > $tfile
- res=`cmp $cmpfile $tfile`
- if [ "$?" != "0" ];
- then
- echo $res
- result1=1;
- else
- result1=0;
- fi
-
- # clean up
- rm -f $tfile
- if [ "$s2" != "0" ] ;
- then
- rm -f $cmpfile
- fi
-}
-
-
-# CHECK_NOUB file.h5
-#
-# Check that 'file.h5' has no user block.
-# Setst result2 to 1 if there is a user block (fail), 0 if none (pass)
-
-result2=0;
-
-CHECK_NOUB() {
- hfile="$1"
-
- # call 'ubsize' to get the size of the user block
- ubsize=`$JAM_BIN/tellub $hfile`
-
- if [ "$?" != "0" ];
- then
- # error
- result2=1;
- else
- if [ "$ubsize" = "0" ];
- then
- # pass
- result2=0;
- else
- # fail
- result2=1;
- fi
- fi
-}
-
-# JAMTEST user_block file.h5 [--clobber] [ofile.h5]
-#
-# Test the 'jam' tool:
-# 1. figure out the input and output, and the comparision
-# that will be done.
-# 2. call 'jam' with the appropriate arguments
-# 3. check the user block is correct in the output (Check_UB)
-# If the user block is correct, print "PASSED", else "*FAILED*"
-JAMTEST() {
- ufile="$1"
- ifile="$2"
- compare_test="" # the file to test
- compare_orig="" # the comparison to test against
- cleanup=""
-
- # sort out the arguments for the test and the check
- do_clobber="no"
- if [ "$3" = "--clobber" ];
- then
- # clobber overwrites any existing user block
- do_clobber="yes"
- clobber="--clobber"
- compare_orig=""
- if [ -z "$4" ];
- then
- # output goes to infile, compare ubfile to infile
- ofile=""
- compare_test="$ifile"
- else
- # output goes to $4, compare ofile to ubfile
- ofile="$4"
- compare_test="$ofile"
- fi
- else
- clobber=""
- # add user block to existing ub, if any
- if [ -z "$3" ];
- then
- # output goes to infile, compare ubfile to infile
- ofile=""
- compare_test="$ifile"
- cp $ifile xxofile.h5
- compare_orig="xxofile.h5"
- cleanup="$cleanup $compare_orig"
- else
- # output goes to $3, compare ofile to ubfile
- ofile="$3"
- compare_test="$ofile"
- compare_orig="$ifile"
- fi
- fi
-
- # call 'jam' with the appropriate arguments
- if [ -n "$ofile" ];
- then
- TESTING h5jam -u `basename $ufile` -i `basename $ifile` -o `basename $ofile` $clobber
- $JAM_BIN/$JAM -u $ufile -i $ifile -o $ofile $clobber
- else
- TESTING jam -u `basename $ufile` -i `basename $ifile` $clobber
- $JAM_BIN/$JAM -u $ufile -i $ifile $clobber
- fi
-
- #echo "CHECK_UB_1 $compare_test $ufile $compare_orig"
- CHECK_UB_1 $compare_test $ufile $compare_orig
-
- if [ "$result1" = "0" ] ;
- then
- echo " PASSED"
- else
- echo " *FAILED*"
- nerrors="`expr $nerrors + 1`"
- fi
- CLEANUP $cleanup
-}
-
-# UNJAMTEST file.h5 [- | --delete] ofile
-#
-# Test the 'unjam' tool
-#
-###fix the working directory here and in jamtest
-UNJAMTEST () {
- infile="$1"
- ofile="$3"
- if [ "$2" = "-" ];
- then
- uofile="uofile"
- TESTING h5unjam -i `basename $infile` -o `basename $ofile` "> "`basename $uofile`
- $JAM_BIN/$UNJAM -i $infile -o $ofile > $uofile
- else
- if [ "$2" = "--delete" ];
- then
- uofile="none"
- TESTING h5unjam -i `basename $infile` -o `basename $ofile` --delete
- $JAM_BIN/$UNJAM -i $infile -o $ofile --delete
-
- else
- uofile="$2"
- TESTING h5unjam -i `basename $infile` -u `basename $uofile` -o `basename $ofile`
- $JAM_BIN/$UNJAM -i $infile -u $uofile -o $ofile
- fi
- fi
-
- result1=0
- result2=0
- cleanup=""
- if [ "$uofile" != "none" ];
- then
- # sets result1
- CHECK_UB_1 $infile $uofile
- CLEANUP $uofile
- fi
-
- # sets result2
- CHECK_NOUB $ofile
-
- if [ "$result1" = "0" -a "$result2" = "0" ];
- then
- echo " PASSED"
- else
- echo " *FAILED*"
- nerrors="`expr $nerrors + 1`"
- fi
-}
-
-
-#
-# TOOLTEST_OUTPUT < JAM | UNJAM > expect-output.txt exit-code options
-#
-# Only verify stdout/stderr output from h5jam and j5unjam
-#
-
-TOOLTEST_OUTPUT() {
- if [ "$1" == "JAM" ]; then
- TOOLCMD=$JAM_BIN/$JAM
- elif [ "$1" == "UNJAM" ]; then
- TOOLCMD=$JAM_BIN/$UNJAM
- fi
- shift
- expect="$TESTDIR/$1"
- actual="$TESTDIR/`basename $1 .ls`.out"
- actual_err="$TESTDIR/`basename $1 .ls`.err"
- actual_sav=${actual}-sav
- actual_err_sav=${actual_err}-sav
- shift
- retvalexpect=$1
- shift
-
- TESTING h5jam $@
- (
- cd $TESTDIR
- $TOOLCMD "$@"
- ) >$actual 2>$actual_err
-
- # save actual and actual_err in case they are needed later.
- cp $actual $actual_sav
- STDOUT_FILTER $actual
- cp $actual_err $actual_err_sav
- STDERR_FILTER $actual_err
- # combine stderr to stdout for output compare
- cat $actual_err >> $actual
-
- if [ ! -f $expect ]; then
- # Create the expect file if it doesn't yet exist.
- echo " CREATED"
- cp $actual $expect
- rm -f $actual $actual_sav $actual_err $actual_err_sav
- elif $CMP $expect $actual; then
- echo " PASSED"
- rm -f $actual $actual_sav $actual_err $actual_err_sav
- else
- echo "*FAILED*"
- echo " Expected result differs from actual result"
- nerrors="`expr $nerrors + 1`"
- test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
- fi
-}
-
-##############################################################################
-##############################################################################
-### T H E T E S T S ###
-##############################################################################
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-
-#-------------------------------
-# Testing h5jam
-#-------------------------------
-# help page
-TOOLTEST_OUTPUT JAM h5jam-help.txt 0 -h
-
-# don't allow HDF5 format file as an user block file
-TOOLTEST_OUTPUT JAM h5jam-ub-nohdf5.txt 1 -i tall.h5 -u tall.h5 -o tall-tmp.h5
-
-JAMTEST $TESTDIR/u10.txt $TESTDIR/tall.h5 ta2.h5
-CHECKFILE $TESTDIR/tall.h5 ta2.h5
-CLEANUP ta2.h5
-JAMTEST $TESTDIR/u511.txt $TESTDIR/tall.h5 ta3.h5
-CHECKFILE $TESTDIR/tall.h5 ta3.h5
-CLEANUP ta3.h5
-JAMTEST $TESTDIR/u512.txt $TESTDIR/tall.h5 ta4.h5
-CHECKFILE $TESTDIR/tall.h5 ta4.h5
-CLEANUP ta4.h5
-JAMTEST $TESTDIR/u513.txt $TESTDIR/tall.h5 ta5.h5
-CHECKFILE $TESTDIR/tall.h5 ta5.h5
-CLEANUP ta5.h5
-
-SETUP $TESTDIR/tall.h5 ta6.h5
-JAMTEST $TESTDIR/u10.txt ta6.h5
-CHECKFILE $TESTDIR/tall.h5 ta6.h5
-CLEANUP ta6.h5
-SETUP $TESTDIR/tall.h5 ta7.h5
-JAMTEST $TESTDIR/u511.txt ta7.h5
-CHECKFILE $TESTDIR/tall.h5 ta7.h5
-CLEANUP ta7.h5
-SETUP $TESTDIR/tall.h5 ta8.h5
-JAMTEST $TESTDIR/u512.txt ta8.h5
-CHECKFILE $TESTDIR/tall.h5 ta8.h5
-CLEANUP ta8.h5
-SETUP $TESTDIR/tall.h5 ta9.h5
-JAMTEST $TESTDIR/u513.txt ta9.h5
-CHECKFILE $TESTDIR/tall.h5 ta9.h5
-CLEANUP ta9.h5
-
-JAMTEST $TESTDIR/u10.txt $TESTDIR/twithub.h5 tax2.h5
-CHECKFILE $TESTDIR/tall.h5 tax2.h5
-CLEANUP tax2.h5
-JAMTEST $TESTDIR/u511.txt $TESTDIR/twithub.h5 tax3.h5
-CHECKFILE $TESTDIR/tall.h5 tax3.h5
-CLEANUP tax3.h5
-JAMTEST $TESTDIR/u512.txt $TESTDIR/twithub.h5 tax4.h5
-CHECKFILE $TESTDIR/tall.h5 tax4.h5
-CLEANUP tax4.h5
-JAMTEST $TESTDIR/u513.txt $TESTDIR/twithub.h5 tax5.h5
-CHECKFILE $TESTDIR/tall.h5 tax5.h5
-CLEANUP tax5.h5
-
-JAMTEST $TESTDIR/u10.txt $TESTDIR/twithub513.h5 tax6.h5
-CHECKFILE $TESTDIR/tall.h5 tax6.h5
-CLEANUP tax6.h5
-JAMTEST $TESTDIR/u511.txt $TESTDIR/twithub513.h5 tax7.h5
-CHECKFILE $TESTDIR/tall.h5 tax7.h5
-CLEANUP tax7.h5
-JAMTEST $TESTDIR/u512.txt $TESTDIR/twithub513.h5 tax8.h5
-CHECKFILE $TESTDIR/tall.h5 tax8.h5
-CLEANUP tax8.h5
-JAMTEST $TESTDIR/u513.txt $TESTDIR/twithub513.h5 tax9.h5
-CHECKFILE $TESTDIR/tall.h5 tax9.h5
-CLEANUP tax9.h5
-
-JAMTEST $TESTDIR/u10.txt $TESTDIR/twithub.h5 --clobber taz2.h5
-CHECKFILE $TESTDIR/tall.h5 taz2.h5
-CLEANUP taz2.h5
-JAMTEST $TESTDIR/u511.txt $TESTDIR/twithub.h5 --clobber taz3.h5
-CHECKFILE $TESTDIR/tall.h5 taz3.h5
-CLEANUP taz3.h5
-JAMTEST $TESTDIR/u512.txt $TESTDIR/twithub.h5 --clobber taz4.h5
-CHECKFILE $TESTDIR/tall.h5 taz4.h5
-CLEANUP taz4.h5
-JAMTEST $TESTDIR/u513.txt $TESTDIR/twithub.h5 --clobber taz5.h5
-CHECKFILE $TESTDIR/tall.h5 taz5.h5
-CLEANUP taz5.h5
-
-JAMTEST $TESTDIR/u10.txt $TESTDIR/twithub513.h5 --clobber taz6.h5
-CHECKFILE $TESTDIR/tall.h5 taz6.h5
-CLEANUP taz6.h5
-JAMTEST $TESTDIR/u511.txt $TESTDIR/twithub513.h5 --clobber taz7.h5
-CHECKFILE $TESTDIR/tall.h5 taz7.h5
-CLEANUP taz7.h5
-JAMTEST $TESTDIR/u512.txt $TESTDIR/twithub513.h5 --clobber taz8.h5
-CHECKFILE $TESTDIR/tall.h5 taz8.h5
-CLEANUP taz8.h5
-JAMTEST $TESTDIR/u513.txt $TESTDIR/twithub513.h5 --clobber taz9.h5
-CHECKFILE $TESTDIR/tall.h5 taz9.h5
-CLEANUP taz9.h5
-
-SETUP $TESTDIR/twithub.h5 tay2.h5
-JAMTEST $TESTDIR/u10.txt tay2.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay2.h5
-CLEANUP tay2.h5
-SETUP $TESTDIR/twithub.h5 tay3.h5
-JAMTEST $TESTDIR/u511.txt tay3.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay3.h5
-CLEANUP tay3.h5
-SETUP $TESTDIR/twithub.h5 tay4.h5
-JAMTEST $TESTDIR/u512.txt tay4.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay4.h5
-CLEANUP tay4.h5
-SETUP $TESTDIR/twithub.h5 tay5.h5
-JAMTEST $TESTDIR/u513.txt tay5.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay5.h5
-CLEANUP tay5.h5
-
-SETUP $TESTDIR/twithub513.h5 tay6.h5
-JAMTEST $TESTDIR/u10.txt tay6.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay6.h5
-CLEANUP tay6.h5
-SETUP $TESTDIR/twithub513.h5 tay7.h5
-JAMTEST $TESTDIR/u511.txt tay7.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay7.h5
-CLEANUP tay7.h5
-SETUP $TESTDIR/twithub513.h5 tay8.h5
-JAMTEST $TESTDIR/u512.txt tay8.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay8.h5
-CLEANUP tay8.h5
-SETUP $TESTDIR/twithub513.h5 tay9.h5
-JAMTEST $TESTDIR/u513.txt tay9.h5 --clobber
-CHECKFILE $TESTDIR/tall.h5 tay9.h5
-CLEANUP tay9.h5
-
-#---------------------------------
-# Testing h5unjam
-#---------------------------------
-# help page
-TOOLTEST_OUTPUT UNJAM h5unjam-help.txt 0 -h
-
-SETUP $TESTDIR/twithub.h5 tai1.h5
-UNJAMTEST tai1.h5 o10.txt taa1.h5
-CHECKFILE $TESTDIR/tall.h5 taa1.h5
-CLEANUP taa1.h5 tai1.h5 o10.txt
-SETUP $TESTDIR/twithub513.h5 tai2.h5
-UNJAMTEST tai2.h5 o512.txt taa2.h5
-CHECKFILE $TESTDIR/tall.h5 taa2.h5
-CLEANUP taa2.h5 tai2.h5 o512.txt
-
-SETUP $TESTDIR/twithub.h5 tai3.h5
-UNJAMTEST tai3.h5 - taa3.h5
-CHECKFILE $TESTDIR/tall.h5 taa3.h5
-CLEANUP taa3.h5 tai3.h5
-SETUP $TESTDIR/twithub513.h5 tai4.h5
-UNJAMTEST tai4.h5 - taa4.h5
-CHECKFILE $TESTDIR/tall.h5 taa4.h5
-CLEANUP taa4.h5 tai4.h5
-
-SETUP $TESTDIR/twithub.h5 taj2.h5
-UNJAMTEST taj2.h5 --delete tac2.h5
-CHECKFILE $TESTDIR/tall.h5 tac2.h5
-CLEANUP tac2.h5 taj2.h5
-SETUP $TESTDIR/twithub513.h5 taj3.h5
-UNJAMTEST taj3.h5 --delete tac3.h5
-CHECKFILE $TESTDIR/tall.h5 tac3.h5
-CLEANUP tac3.h5 taj3.h5
-
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-if test $nerrors -eq 0 ; then
- echo "All $TESTNAME tests passed."
- exit $EXIT_SUCCESS
-else
- echo "$TESTNAME tests failed with $nerrors errors."
- exit $EXIT_FAILURE
-fi
generated by cgit v0.12 at 2024-07-20 06:50:03 (GMT)