1 files changed, 0 insertions, 258 deletions
diff --git a/tools/h5ls/testh5lsvds.sh.in b/tools/h5ls/testh5lsvds.sh.in
deleted file mode 100644
index 47a48e3..0000000
--- a/tools/h5ls/testh5lsvds.sh.in
+++ /dev/null
@@ -1,258 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5ls tool
-
-srcdir=@srcdir@
-
-TESTNAME=h5ls
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-H5LS=h5ls               # The tool name
-H5LS_BIN=`pwd`/$H5LS    # The path of the tool binary
-
-RM='rm -rf'
-CMP='cmp -s'
-DIFF='diff -c'
-CP='cp'
-NLINES=20          # Max. lines of output to display if test fails
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-WORDS_BIGENDIAN="@WORDS_BIGENDIAN@"
-
-nerrors=0
-verbose=yes
-h5haveexitcode=yes      # default is yes
-
-# source dirs
-SRC_TOOLS="$srcdir/.."
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-
-# testfiles source dirs for tools
-SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
-SRC_H5DIFF_TESTFILES="$SRC_TOOLS/h5diff/testfiles"
-SRC_H5COPY_TESTFILES="$SRC_TOOLS/h5copy/testfiles"
-SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles"
-SRC_H5JAM_TESTFILES="$SRC_TOOLS/h5jam/testfiles"
-SRC_H5STAT_TESTFILES="$SRC_TOOLS/h5stat/testfiles"
-SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/h5import/testfiles"
-
-TEST_P_DIR=./testfiles
-TESTDIR=./testfiles/vds
-test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR
-test -d $TESTDIR || mkdir $TESTDIR
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-#       Any test files from other tools can be used in this framework.
-#       This list are also used for checking exist.
-#       Comment '#' without space can be used.
-# --------------------------------------------------------------------
-LIST_HDF5_TEST_FILES="
-$SRC_H5LS_TESTFILES/vds/1_a.h5
-$SRC_H5LS_TESTFILES/vds/1_b.h5
-$SRC_H5LS_TESTFILES/vds/1_c.h5
-$SRC_H5LS_TESTFILES/vds/1_d.h5
-$SRC_H5LS_TESTFILES/vds/1_e.h5
-$SRC_H5LS_TESTFILES/vds/1_f.h5
-$SRC_H5LS_TESTFILES/vds/1_vds.h5
-$SRC_H5LS_TESTFILES/vds/2_a.h5
-$SRC_H5LS_TESTFILES/vds/2_b.h5
-$SRC_H5LS_TESTFILES/vds/2_c.h5
-$SRC_H5LS_TESTFILES/vds/2_d.h5
-$SRC_H5LS_TESTFILES/vds/2_e.h5
-$SRC_H5LS_TESTFILES/vds/2_vds.h5
-$SRC_H5LS_TESTFILES/vds/3_1_vds.h5
-$SRC_H5LS_TESTFILES/vds/3_2_vds.h5
-$SRC_H5LS_TESTFILES/vds/4_0.h5
-$SRC_H5LS_TESTFILES/vds/4_1.h5
-$SRC_H5LS_TESTFILES/vds/4_2.h5
-$SRC_H5LS_TESTFILES/vds/4_vds.h5
-$SRC_H5LS_TESTFILES/vds/5_a.h5
-$SRC_H5LS_TESTFILES/vds/5_b.h5
-$SRC_H5LS_TESTFILES/vds/5_c.h5
-$SRC_H5LS_TESTFILES/vds/5_vds.h5
-"
-
-LIST_OTHER_TEST_FILES="
-$SRC_H5LS_TESTFILES/vds/tvds-1.ls
-$SRC_H5LS_TESTFILES/vds/tvds-2.ls
-$SRC_H5LS_TESTFILES/vds/tvds-3_1.ls
-$SRC_H5LS_TESTFILES/vds/tvds-3_2.ls
-$SRC_H5LS_TESTFILES/vds/tvds-4.ls
-$SRC_H5LS_TESTFILES/vds/tvds-5.ls
-"
-
-
-# RUNSERIAL is used. Check if it can return exit code from executalbe correctly.
-if [ -n "$RUNSERIAL_NOEXITCODE" ]; then
-    echo "***Warning*** Serial Exit Code is not passed back to shell corretly."
-    echo "***Warning*** Exit code checking is skipped."
-    h5haveexitcode=no
-fi
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
-    # copy test files. Used -f to make sure get a new copy
-    for tstfile in $COPY_TESTFILES
-    do
-        # ignore '#' comment
-        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
-        RET=$?
-        if [ $RET -eq 1 ]; then
-            # skip cp if srcdir is same as destdir
-            # this occurs when build/test performed in source dir and
-            # make cp fail
-            SDIR=`$DIRNAME $tstfile`
-            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-              $CP -f $tstfile $TESTDIR
-                if [ $? -ne 0 ]; then
-                    echo "Error: FAILED to copy $tstfile ."
-
-                    # Comment out this to CREATE expected file
-                    exit $EXIT_FAILURE
-                fi
-            fi
-        fi
-    done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
-    # skip rm if srcdir is same as destdir
-    # this occurs when build/test performed in source dir and
-    # make cp fail
-    SDIR=$SRC_H5LS_TESTFILES/vds
-    INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-    INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-    if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-        $RM $TESTDIR
-    fi
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-TESTING() {
-    SPACES="                                                               "
-    echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
-}
-
-# Source in the output filter function definitions.
-. $srcdir/../../bin/output_filter.sh
-
-# Run a test and print PASS or *FAIL*. For now, if h5ls can complete
-# with exit status 0, consider it pass. If a test fails then increment
-# the `nerrors' global variable and (if $verbose is set) display up to $NLINS
-# lines of the actual output from the tool test.  The actual output is not
-# removed if $HDF5_NOCLEANUP has a non-zero value.
-# Arguemnts:
-# $1 -- actual output filename to use
-# $2 and on -- argument for the h5ls tool
-TOOLTEST() {
-    expect="$TESTDIR/$1"
-    actual="$TESTDIR/`basename $1 .ls`.out"
-    actual_err="$TESTDIR/`basename $1 .ls`.err"
-    actual_sav=${actual}-sav
-    actual_err_sav=${actual_err}-sav
-    shift
-    retvalexpect=$1
-    shift
-
-    # Run test.
-    # Stderr is included in stdout so that the diff can detect
-    # any unexpected output from that stream too.
-    TESTING $H5LS $@
-    (
-  cd $TESTDIR
-        $RUNSERIAL $H5LS_BIN "$@"
-    ) >$actual 2>$actual_err
-
-    exitcode=$?
-    # save actual and actual_err in case they are needed later.
-    cp $actual $actual_sav
-    STDOUT_FILTER $actual
-    cp $actual_err $actual_err_sav
-    STDERR_FILTER $actual_err
-    cat $actual_err >> $actual
-    if [ $h5haveexitcode = 'yes' -a $exitcode -ne $retvalexpect ]; then
-  echo "*FAILED*"
-  nerrors="`expr $nerrors + 1`"
-  if [ yes = "$verbose" ]; then
-      echo "test returned with exit code $exitcode"
-      echo "test output: (up to $NLINES lines)"
-      head -$NLINES $actual
-      echo "***end of test output***"
-      echo ""
-  fi
-    elif [ ! -f $expect ]; then
-  # Create the expect file if it doesn't yet exist.
-        echo " CREATED"
-        cp $actual $expect
-    elif $CMP $expect $actual; then
-        echo " PASSED"
-    else
-        echo "*FAILED*"
-  echo "    Expected result differs from actual result"
-  nerrors="`expr $nerrors + 1`"
-  test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-    fi
-
-    # Clean up output file
-    if test -z "$HDF5_NOCLEANUP"; then
-  rm -f $actual $actual_err $actual_sav $actual_err_sav
-    fi
-}
-
-##############################################################################
-##############################################################################
-###			  T H E   T E S T S                                ###
-##############################################################################
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-
-####### test for dataset vds ######
-
-TOOLTEST tvds-1.ls 0 -w80 -v -S 1_vds.h5
-TOOLTEST tvds-2.ls 0 -w80 -v -S 2_vds.h5
-TOOLTEST tvds-3_1.ls 0 -w80 -v -S 3_1_vds.h5
-TOOLTEST tvds-3_2.ls 0 -w80 -v -S 3_2_vds.h5
-TOOLTEST tvds-4.ls 0 -w80 -v -S 4_vds.h5
-TOOLTEST tvds-5.ls 0 -w80 -v -S 5_vds.h5
-
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-if test $nerrors -eq 0 ; then
-    echo "All $TESTNAME tests passed."
-    exit $EXIT_SUCCESS
-else
-    echo "$TESTNAME tests failed with $nerrors errors."
-    exit $EXIT_FAILURE
-fi