summaryrefslogtreecommitdiffstats
path: root/tools/h5repack/CMakeTests.cmake
diff options
context:
space:
mode:
Diffstat (limited to 'tools/h5repack/CMakeTests.cmake')
-rw-r--r--tools/h5repack/CMakeTests.cmake190
1 files changed, 100 insertions, 90 deletions
diff --git a/tools/h5repack/CMakeTests.cmake b/tools/h5repack/CMakeTests.cmake
index 08420ff..dafed86 100644
--- a/tools/h5repack/CMakeTests.cmake
+++ b/tools/h5repack/CMakeTests.cmake
@@ -1,3 +1,14 @@
+#
+# Copyright by The HDF Group.
+# All rights reserved.
+#
+# This file is part of HDF5. The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the COPYING file, which can be found at the root of the source code
+# distribution tree, or in https://support.hdfgroup.org/ftp/HDF5/releases.
+# If you do not have access to either file, you may request a copy from
+# help@hdfgroup.org.
+#
##############################################################################
##############################################################################
@@ -17,9 +28,9 @@
if (DIRECT_VFD)
set (VFD_LIST ${VFD_LIST} direct)
- endif (DIRECT_VFD)
+ endif ()
- MACRO (ADD_VFD_TEST vfdname resultcode)
+ macro (ADD_VFD_TEST vfdname resultcode)
add_test (
NAME H5REPACK-VFD-${vfdname}-h5repacktest
COMMAND "${CMAKE_COMMAND}"
@@ -33,10 +44,10 @@
)
if (NOT "${last_test}" STREQUAL "")
set_tests_properties (H5REPACK-VFD-${vfdname}-h5repacktest PROPERTIES DEPENDS ${last_test})
- endif (NOT "${last_test}" STREQUAL "")
+ endif ()
set (last_test "H5REPACK-VFD-${vfdname}-h5repacktest")
- ENDMACRO (ADD_VFD_TEST)
- endif (HDF5_TEST_VFD)
+ endmacro ()
+ endif ()
# --------------------------------------------------------------------
# Copy all the HDF5 files from the source directory into the test directory
@@ -77,6 +88,7 @@
${HDF5_TOOLS_SRC_DIR}/testfiles/tfamily00008.h5
${HDF5_TOOLS_SRC_DIR}/testfiles/tfamily00009.h5
${HDF5_TOOLS_SRC_DIR}/testfiles/tfamily00010.h5
+ ${HDF5_TOOLS_SRC_DIR}/testfiles/tordergr.h5
)
set (LIST_OTHER_TEST_FILES
@@ -95,12 +107,13 @@
${HDF5_TOOLS_H5REPACK_SOURCE_DIR}/testfiles/h5repack_layout.h5-plugin_version_test.ddl
${HDF5_TOOLS_H5REPACK_SOURCE_DIR}/testfiles/plugin_version_test.h5repack_layout.h5.tst
${HDF5_TOOLS_H5REPACK_SOURCE_DIR}/testfiles/h5repack_layout.h5-plugin_zero.tst
+ ${HDF5_TOOLS_H5REPACK_SOURCE_DIR}/testfiles/crtorder.tordergr.h5.ddl
)
foreach (h5_file ${LIST_HDF5_TEST_FILES} ${LIST_OTHER_TEST_FILES})
get_filename_component(fname "${h5_file}" NAME)
HDFTEST_COPY_FILE("${h5_file}" "${PROJECT_BINARY_DIR}/testfiles/${fname}" "h5repack_files")
- endforeach (h5_file ${LIST_HDF5_TEST_FILES} ${LIST_OTHER_TEST_FILES})
+ endforeach ()
add_custom_target(h5repack_files ALL COMMENT "Copying files needed by h5repack tests" DEPENDS ${h5repack_files_list})
##############################################################################
@@ -109,7 +122,7 @@
##############################################################################
##############################################################################
- MACRO (ADD_HELP_TEST testname resultcode)
+ macro (ADD_HELP_TEST testname resultcode)
# If using memchecker add tests without using scripts
if (HDF5_ENABLE_USING_MEMCHECKER)
add_test (NAME H5REPACK-${testname} COMMAND $<TARGET_FILE:h5repack> ${ARGN})
@@ -118,13 +131,7 @@
set_tests_properties (H5REPACK-${testname} PROPERTIES DEPENDS ${last_test})
endif ()
set (last_test "H5REPACK-${testname}")
- else (HDF5_ENABLE_USING_MEMCHECKER)
- add_test (
- NAME H5REPACK-h5repack-${testname}-clear-objects
- COMMAND ${CMAKE_COMMAND}
- -E remove h5repack-${testname}.out h5repack-${testname}.out.err
- )
- set_tests_properties (H5REPACK-h5repack-${testname}-clear-objects PROPERTIES WORKING_DIRECTORY "${PROJECT_BINARY_DIR}/testfiles")
+ else ()
add_test (
NAME H5REPACK-h5repack-${testname}
COMMAND "${CMAKE_COMMAND}"
@@ -136,19 +143,18 @@
-D "TEST_REFERENCE=h5repack-${testname}.txt"
-P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
)
- set_tests_properties (H5REPACK-h5repack-${testname} PROPERTIES DEPENDS "H5REPACK-h5repack-${testname}-clear-objects")
- endif (HDF5_ENABLE_USING_MEMCHECKER)
- ENDMACRO (ADD_HELP_TEST)
+ endif ()
+ endmacro ()
- MACRO (ADD_H5_TEST_OLD testname testtype testfile)
+ macro (ADD_H5_TEST_OLD testname testtype testfile)
if ("${testtype}" STREQUAL "SKIP")
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
add_test (
NAME H5REPACK_OLD-${testname}-SKIPPED
COMMAND ${CMAKE_COMMAND} -E echo "SKIP ${ARGN} -i ${PROJECT_BINARY_DIR}/testfiles/${testfile} -o ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${testfile}"
)
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- else ("${testtype}" STREQUAL "SKIP")
+ endif ()
+ else ()
add_test (
NAME H5REPACK_OLD-${testname}
COMMAND $<TARGET_FILE:h5repack> ${ARGN} -i ${PROJECT_BINARY_DIR}/testfiles/${testfile} -o ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${testfile}
@@ -161,18 +167,18 @@
COMMAND $<TARGET_FILE:h5diff> ${PROJECT_BINARY_DIR}/testfiles/${testfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${testfile}
)
set_tests_properties (H5REPACK_OLD-${testname}_DFF PROPERTIES DEPENDS H5REPACK_OLD-${testname})
- endif ("${testtype}" STREQUAL "SKIP")
- ENDMACRO (ADD_H5_TEST_OLD)
+ endif ()
+ endmacro ()
- MACRO (ADD_H5_TEST testname testtype testfile)
+ macro (ADD_H5_TEST testname testtype testfile)
if ("${testtype}" STREQUAL "SKIP")
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
add_test (
NAME H5REPACK-${testname}-SKIPPED
COMMAND ${CMAKE_COMMAND} -E echo "SKIP ${ARGN} ${PROJECT_BINARY_DIR}/testfiles/${testfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${testfile}"
)
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- else ("${testtype}" STREQUAL "SKIP")
+ endif ()
+ else ()
add_test (
NAME H5REPACK-${testname}
COMMAND $<TARGET_FILE:h5repack> ${ARGN} ${PROJECT_BINARY_DIR}/testfiles/${testfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${testfile}
@@ -185,24 +191,24 @@
COMMAND $<TARGET_FILE:h5diff> ${PROJECT_BINARY_DIR}/testfiles/${testfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${testfile}
)
set_tests_properties (H5REPACK-${testname}_DFF PROPERTIES DEPENDS H5REPACK-${testname})
- endif ("${testtype}" STREQUAL "SKIP")
- ENDMACRO (ADD_H5_TEST)
+ endif ()
+ endmacro ()
- MACRO (ADD_H5_CMP_TEST testname testfilter testtype resultcode resultfile)
+ macro (ADD_H5_CMP_TEST testname testfilter testtype resultcode resultfile)
if ("${testtype}" STREQUAL "SKIP")
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
add_test (
NAME H5REPACK_CMP-${testname}-SKIPPED
COMMAND ${CMAKE_COMMAND} -E echo "SKIP ${ARGN} ${PROJECT_BINARY_DIR}/testfiles/${resultfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${resultfile}"
)
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- else ("${testtype}" STREQUAL "SKIP")
+ endif ()
+ else ()
# If using memchecker add tests without using scripts
if (HDF5_ENABLE_USING_MEMCHECKER)
add_test (
NAME H5REPACK_CMP-${testname}
COMMAND $<TARGET_FILE:h5repack> ${ARGN} ${PROJECT_BINARY_DIR}/testfiles/${resultfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${resultfile})
- else (HDF5_ENABLE_USING_MEMCHECKER)
+ else ()
add_test (
NAME H5REPACK_CMP-${testname}
COMMAND "${CMAKE_COMMAND}"
@@ -215,22 +221,22 @@
-D "TEST_REFERENCE=${resultfile}-${testname}.tst"
-P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
)
- endif (HDF5_ENABLE_USING_MEMCHECKER)
+ endif ()
if (NOT "${last_test}" STREQUAL "")
set_tests_properties (H5REPACK_CMP-${testname} PROPERTIES DEPENDS ${last_test})
endif ()
- endif ("${testtype}" STREQUAL "SKIP")
- ENDMACRO (ADD_H5_CMP_TEST)
+ endif ()
+ endmacro ()
- MACRO (ADD_H5_DMP_TEST testname testtype resultcode resultfile)
+ macro (ADD_H5_DMP_TEST testname testtype resultcode resultfile)
if ("${testtype}" STREQUAL "SKIP")
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
add_test (
NAME H5REPACK_DMP-${testname}-SKIPPED
COMMAND ${CMAKE_COMMAND} -E echo "SKIP ${ARGN} ${PROJECT_BINARY_DIR}/testfiles/${resultfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${resultfile}"
)
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- else ("${testtype}" STREQUAL "SKIP")
+ endif ()
+ else ()
# If using memchecker add tests without using scripts
add_test (
NAME H5REPACK_DMP-${testname}
@@ -243,7 +249,7 @@
NAME H5REPACK_DMP-h5dump-${testname}
COMMAND "${CMAKE_COMMAND}"
-D "TEST_PROGRAM=$<TARGET_FILE:h5dump>"
- -D "TEST_ARGS:STRING=-pH;out-${testname}.${resultfile}"
+ -D "TEST_ARGS:STRING=-q;creation_order;-pH;out-${testname}.${resultfile}"
-D "TEST_FOLDER=${PROJECT_BINARY_DIR}/testfiles"
-D "TEST_OUTPUT=${resultfile}-${testname}.out"
-D "TEST_EXPECT=${resultcode}"
@@ -251,19 +257,19 @@
-P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
)
set_tests_properties (H5REPACK_DMP-h5dump-${testname} PROPERTIES DEPENDS "H5REPACK_DMP-${testname}")
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- endif ("${testtype}" STREQUAL "SKIP")
- ENDMACRO (ADD_H5_DMP_TEST)
+ endif ()
+ endif ()
+ endmacro ()
- MACRO (ADD_H5_VERIFY_TEST testname testtype resultcode testfile testdset testfilter)
+ macro (ADD_H5_VERIFY_TEST testname testtype resultcode testfile testdset testfilter)
if ("${testtype}" STREQUAL "SKIP")
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
add_test (
NAME H5REPACK_VERIFY_LAYOUT-${testname}-SKIPPED
COMMAND ${CMAKE_COMMAND} -E echo "SKIP -d ${testdset} -pH ${PROJECT_BINARY_DIR}/testfiles/out-${testname}.${resultfile}"
)
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- else ("${testtype}" STREQUAL "SKIP")
+ endif ()
+ else ()
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
add_test (
NAME H5REPACK_VERIFY_LAYOUT-${testname}
@@ -291,7 +297,7 @@
-P "${HDF_RESOURCES_EXT_DIR}/grepTest.cmake"
)
set_tests_properties (H5REPACK_VERIFY_LAYOUT-${testname}_DMP PROPERTIES DEPENDS H5REPACK_VERIFY_LAYOUT-${testname}_DFF)
- else ("${resultcode}" STREQUAL "0")
+ else ()
if ("${testfilter}" STREQUAL "CHUNKED")
set (nottestfilter "(CONTIGUOUS|COMPACT)")
endif ()
@@ -314,12 +320,12 @@
-P "${HDF_RESOURCES_EXT_DIR}/grepTest.cmake"
)
set_tests_properties (H5REPACK_VERIFY_LAYOUT-${testname}_DMP PROPERTIES DEPENDS H5REPACK_VERIFY_LAYOUT-${testname}_DFF)
- endif ("${resultcode}" STREQUAL "0")
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- endif ("${testtype}" STREQUAL "SKIP")
- ENDMACRO (ADD_H5_VERIFY_TEST)
+ endif ()
+ endif ()
+ endif ()
+ endmacro ()
- MACRO (ADD_H5_TEST_META testname testfile)
+ macro (ADD_H5_TEST_META testname testfile)
add_test (
NAME H5REPACK_META-${testname}_N
COMMAND $<TARGET_FILE:h5repack> ${PROJECT_BINARY_DIR}/testfiles/${testfile} ${PROJECT_BINARY_DIR}/testfiles/out-${testname}_N.${testname}.h5
@@ -336,9 +342,9 @@
add_test (NAME H5REPACK_META-${testname} COMMAND ${CMAKE_COMMAND} -E compare_files ${PROJECT_BINARY_DIR}/testfiles/out-${testname}_N.${testname}.h5 ${PROJECT_BINARY_DIR}/testfiles/out-${testname}_M.${testname}.h5)
set_tests_properties (H5REPACK_META-${testname} PROPERTIES WILL_FAIL "true")
set_tests_properties (H5REPACK_META-${testname} PROPERTIES DEPENDS H5REPACK_META-${testname}_M)
- ENDMACRO (ADD_H5_TEST_META)
+ endmacro ()
- MACRO (ADD_H5_UD_TEST testname resultcode resultfile)
+ macro (ADD_H5_UD_TEST testname resultcode resultfile)
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
# Remove any output file left over from previous test run
add_test (
@@ -346,10 +352,6 @@
COMMAND ${CMAKE_COMMAND}
-E remove
testfiles/out-${testname}.${resultfile}
- testfiles/${testname}.${resultfile}.out
- testfiles/${testname}.${resultfile}.out.err
- testfiles/${resultfile}-${testname}.out
- testfiles/${resultfile}-${testname}.out.err
)
add_test (
NAME H5REPACK_UD-${testname}
@@ -380,8 +382,8 @@
-P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
)
set_tests_properties (H5REPACK_UD-h5dump-${testname} PROPERTIES DEPENDS "H5REPACK_UD-${testname}")
- endif (NOT HDF5_ENABLE_USING_MEMCHECKER)
- ENDMACRO (ADD_H5_UD_TEST)
+ endif ()
+ endmacro ()
##############################################################################
##############################################################################
@@ -597,7 +599,7 @@
)
if (NOT "${last_test}" STREQUAL "")
set_tests_properties (H5REPACK-clearall-objects PROPERTIES DEPENDS ${last_test})
- endif (NOT "${last_test}" STREQUAL "")
+ endif ()
ADD_HELP_TEST(help 0 -h)
@@ -606,14 +608,14 @@
if (HDF5_ENABLE_SZIP_ENCODING)
set (passRegex "yes")
set_tests_properties (H5REPACK-testh5repack_detect_szip PROPERTIES PASS_REGULAR_EXPRESSION "yes")
- else (HDF5_ENABLE_SZIP_ENCODING)
+ else ()
set (passRegex "no")
set_tests_properties (H5REPACK-testh5repack_detect_szip PROPERTIES PASS_REGULAR_EXPRESSION "no")
- endif (HDF5_ENABLE_SZIP_ENCODING)
- else (HDF5_ENABLE_SZIP_SUPPORT)
+ endif ()
+ else ()
set (passRegex "no")
set_tests_properties (H5REPACK-testh5repack_detect_szip PROPERTIES PASS_REGULAR_EXPRESSION "no")
- endif (HDF5_ENABLE_SZIP_SUPPORT)
+ endif ()
set_tests_properties (H5REPACK-testh5repack_detect_szip PROPERTIES DEPENDS H5REPACK-clearall-objects)
add_test (NAME H5REPACK-h5repacktest COMMAND $<TARGET_FILE:h5repacktest>)
@@ -637,15 +639,15 @@
set (USE_FILTER_SZIP_ENCODER "no")
if (HDF5_ENABLE_SZIP_ENCODING)
set (USE_FILTER_SZIP_ENCODER ${testh5repack_detect_szip})
- endif (HDF5_ENABLE_SZIP_ENCODING)
+ endif ()
if (H5_HAVE_FILTER_DEFLATE)
set (USE_FILTER_DEFLATE "true")
- endif (H5_HAVE_FILTER_DEFLATE)
+ endif ()
if (H5_HAVE_FILTER_SZIP)
set (USE_FILTER_SZIP "true")
- endif (H5_HAVE_FILTER_SZIP)
+ endif ()
# copy files (these files have no filters)
ADD_H5_TEST (fill "TEST" ${FILE0})
@@ -662,7 +664,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (gzip_individual ${TESTTYPE} ${arg})
# gzip for all
@@ -670,7 +672,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (gzip_all ${TESTTYPE} ${arg})
# szip with individual object
@@ -678,7 +680,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
+ endif ()
ADD_H5_TEST (szip_individual ${TESTTYPE} ${arg})
# szip for all
@@ -686,7 +688,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
+ endif ()
ADD_H5_TEST (szip_all ${TESTTYPE} ${arg})
# shuffle with individual object
@@ -710,7 +712,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP OR NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP OR NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (all_filters ${TESTTYPE} ${arg})
# verbose gzip with individual object
@@ -718,7 +720,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_CMP_TEST (gzip_verbose_filters "O?...ing file[^\n]+\n" ${TESTTYPE} 0 ${arg})
###########################################################
@@ -730,7 +732,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
+ endif ()
ADD_H5_TEST (szip_copy ${TESTTYPE} ${arg})
# szip remove
@@ -738,7 +740,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP)
+ endif ()
ADD_H5_TEST (szip_remove ${TESTTYPE} ${arg})
# deflate copy
@@ -746,7 +748,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (deflate_copy ${TESTTYPE} ${arg})
# deflate remove
@@ -754,7 +756,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (deflate_remove ${TESTTYPE} ${arg})
# shuffle copy
@@ -802,7 +804,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE OR NOT USE_FILTER_SZIP OR NOT USE_FILTER_SZIP_ENCODER)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE OR NOT USE_FILTER_SZIP OR NOT USE_FILTER_SZIP_ENCODER)
+ endif ()
ADD_H5_TEST (remove_all ${TESTTYPE} ${arg})
#filter conversions
@@ -810,14 +812,14 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP OR NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_SZIP OR NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (deflate_convert ${TESTTYPE} ${arg})
set (arg ${FILE7} -f dset_szip:GZIP=1)
set (TESTTYPE "TEST")
if (NOT USE_FILTER_SZIP OR NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_SZIP OR NOT USE_FILTER_SZIP_ENCODER OR NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (szip_convert ${TESTTYPE} ${arg})
#limit
@@ -825,7 +827,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_DMP_TEST (deflate_limit ${TESTTYPE} 0 ${arg})
#file
@@ -833,9 +835,14 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (deflate_file ${TESTTYPE} ${arg})
+#crtorder
+ set (arg tordergr.h5 -L)
+ set (TESTTYPE "TEST")
+ ADD_H5_DMP_TEST (crtorder ${TESTTYPE} 0 ${arg})
+
#########################################################
# layout options (these files have no filters)
#########################################################
@@ -920,7 +927,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_VERIFY_TEST (layout_long_switches ${TESTTYPE} 1 ${FILE4} null CHUNKED ${arg})
# latest file format with short switches. use FILE4=h5repack_layout.h5 (no filters)
@@ -928,7 +935,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_VERIFY_TEST (layout_short_switches ${TESTTYPE} 1 ${FILE4} null CHUNKED ${arg})
# several global filters
@@ -936,7 +943,7 @@
set (TESTTYPE "TEST")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST (global_filters ${TESTTYPE} ${arg})
# syntax of -i infile -o outfile
@@ -945,7 +952,7 @@
set (TESTTYPE "LEGACY")
if (NOT USE_FILTER_DEFLATE)
set (TESTTYPE "SKIP")
- endif (NOT USE_FILTER_DEFLATE)
+ endif ()
ADD_H5_TEST_OLD (old_style_layout_short_switches ${TESTTYPE} ${arg})
# add a userblock to file
@@ -961,7 +968,10 @@
ADD_H5_TEST (upgrade_layout "TEST" ${FILE14})
# test for datum size > H5TOOLS_MALLOCSIZE
- ADD_H5_TEST (gt_mallocsize "TEST" ${FILE1} -f GZIP=1)
+ if (NOT USE_FILTER_DEFLATE)
+ set (TESTTYPE "SKIP")
+ endif ()
+ ADD_H5_TEST (gt_mallocsize ${TESTTYPE} ${FILE1} -f GZIP=1)
# Check repacking file with committed datatypes in odd configurations
ADD_H5_TEST (committed_dt "TEST" ${FILE15})
@@ -990,19 +1000,19 @@
##############################################################################
### P L U G I N T E S T S
##############################################################################
- ADD_H5_UD_TEST (plugin_version_test 0 h5repack_layout.h5 -v -f UD=260,4,9,1,8,18)
+ ADD_H5_UD_TEST (plugin_version_test 0 h5repack_layout.h5 -v -f UD=260,4,9,${H5_VERS_MAJOR},${H5_VERS_MINOR},${H5_VERS_RELEASE})
ADD_H5_UD_TEST (plugin_test 0 h5repack_layout.h5 -v -f UD=257,1,9)
ADD_H5_UD_TEST (plugin_none 0 h5repack_layout.UD.h5 -v -f NONE)
# check for no parameters
set (TESTRETVAL 255)
if (WIN32)
set (TESTRETVAL -1)
- endif()
+ endif ()
ADD_H5_CMP_TEST (plugin_zero "" "TEST" ${TESTRETVAL} h5repack_layout.h5 -v -f UD=250,0)
if (HDF5_TEST_VFD)
# Run test with different Virtual File Driver
foreach (vfd ${VFD_LIST})
ADD_VFD_TEST (${vfd} 0)
- endforeach (vfd ${VFD_LIST})
- endif (HDF5_TEST_VFD)
+ endforeach ()
+ endif ()
generated by cgit v0.12 at 2024-08-22 22:56:05 (GMT)