diff options
Diffstat (limited to 'tools/h5repack/h5repack_plugin.sh.in')
| -rw-r--r-- | tools/h5repack/h5repack_plugin.sh.in | 275 |
1 files changed, 0 insertions, 275 deletions
diff --git a/tools/h5repack/h5repack_plugin.sh.in b/tools/h5repack/h5repack_plugin.sh.in deleted file mode 100644 index c8d5bf7..0000000 --- a/tools/h5repack/h5repack_plugin.sh.in +++ /dev/null @@ -1,275 +0,0 @@ -#! /bin/sh -# -# Copyright by The HDF Group. -# All rights reserved. -# -# This file is part of HDF5. The full HDF5 copyright notice, including -# terms governing use, modification, and redistribution, is contained in -# the files COPYING and Copyright.html. COPYING can be found at the root -# of the source code distribution tree; Copyright.html can be found at the -# root level of an installed copy of the electronic document set and is -# linked from the top-level documents page. It can also be found at -# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have access -# to either file, you may request a copy from help@hdfgroup.org. -# -srcdir=@srcdir@ -TOP_BUILDDIR=@top_builddir@ - -# Determine backward compatibility options enabled -DEPRECATED_SYMBOLS="@DEPRECATED_SYMBOLS@" - -EXIT_SUCCESS=0 -EXIT_FAILURE=1 - -H5REPACK=h5repack # The tool name -H5REPACK_BIN=`pwd`/$H5REPACK # The path of the tool binary - -H5DUMP=../h5dump/h5dump # The h5dump tool name -H5DUMP_BIN=`pwd`/$H5DUMP # The path of the h5dump tool binary - -nerrors=0 -verbose=yes -exit_code=$EXIT_SUCCESS - -TEST_NAME=ud_plugin -FROM_DIR=`pwd`/.libs -PLUGIN_LIB="$FROM_DIR/libdynlibadd.*" -PLUGIN_LIB2="$FROM_DIR/libdynlibvers.*" -PLUGIN_LIBDIR=testdir3 -RM='rm -rf' - -GREP='grep' -CP='cp' -DIRNAME='dirname' -LS='ls' -AWK='awk' - -# source dirs -SRC_TOOLS="$srcdir/.." - -# testfiles source dirs for tools -SRC_H5REPACK_TESTFILES="$SRC_TOOLS/h5repack/testfiles" - -TESTDIR=testplug -test -d $TESTDIR || mkdir $TESTDIR - -###################################################################### -# test files -# -------------------------------------------------------------------- -# All the test files copy from source directory to test directory -# NOTE: Keep this framework to add/remove test files. -# Any test files from other tools can be used in this framework. -# This list are also used for checking exist. -# Comment '#' without space can be used. -# -------------------------------------------------------------------- -LIST_HDF5_TEST_FILES=" -$SRC_H5REPACK_TESTFILES/h5repack_layout.h5 -$SRC_H5REPACK_TESTFILES/h5repack_layout.h5-plugin_test.ddl -$SRC_H5REPACK_TESTFILES/plugin_test.h5repack_layout.h5.tst -$SRC_H5REPACK_TESTFILES/h5repack_layout.h5-plugin_version_test.ddl -$SRC_H5REPACK_TESTFILES/plugin_version_test.h5repack_layout.h5.tst -" -#$SRC_H5REPACK_TESTFILES/h5repack_layout.UD.h5 -#$SRC_H5REPACK_TESTFILES/h5repack_layout.UD.h5-plugin_none.ddl -#$SRC_H5REPACK_TESTFILES/plugin_none.h5repack_layout.UD.h5.tst -#" - -# -# copy test files and expected output files from source dirs to test dir -# -COPY_TESTFILES="$LIST_HDF5_TEST_FILES" - -# Main Body -# Create test directories if not exists yet. -test -d $PLUGIN_LIBDIR || mkdir -p $PLUGIN_LIBDIR -if [ $? != 0 ]; then - echo "Failed to create test directory($PLUGIN_LIBDIR)" - exit $EXIT_FAILURE -fi - -# copy plugin library for test -$CP $PLUGIN_LIB $PLUGIN_LIBDIR -if [ $? != 0 ]; then - echo "Failed to copy plugin library ($PLUGIN_LIB) for test." - exit $EXIT_FAILURE -fi -$CP $PLUGIN_LIB2 $PLUGIN_LIBDIR -if [ $? != 0 ]; then - echo "Failed to copy plugin library ($PLUGIN_LIB2) for test." - exit $EXIT_FAILURE -fi - -# setup plugin path -ENVCMD="env HDF5_PLUGIN_PATH=../${PLUGIN_LIBDIR}" - -COPY_TESTFILES_TO_TESTDIR() -{ - # copy test files. Used -f to make sure get a new copy - for tstfile in $COPY_TESTFILES - do - # ignore '#' comment - echo $tstfile | tr -d ' ' | grep '^#' > /dev/null - RET=$? - if [ $RET -eq 1 ]; then - # skip cp if srcdir is same as destdir - # this occurs when build/test performed in source dir and - # make cp fail - SDIR=`$DIRNAME $tstfile` - INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` - INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` - if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then - $CP -f $tstfile $TESTDIR - if [ $? -ne 0 ]; then - echo "Error: FAILED to copy $tstfile ." - - # Comment out this to CREATE expected file - exit $EXIT_FAILURE - fi - fi - fi - done -} - -CLEAN_TESTFILES_AND_TESTDIR() -{ - # skip rm if srcdir is same as destdir - # this occurs when build/test performed in source dir and - # make cp fail - SDIR=$SRC_H5REPACK_TESTFILES - INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` - INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` - if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then - $RM $TESTDIR - fi -} - -# Print a $* message left justified in a field of 70 characters -# -MESSAGE() { - SPACES=" " - echo "$* $SPACES" | cut -c1-70 | tr -d '\012' -} - -# Print a line-line message left justified in a field of 70 characters -# beginning with the word "Testing". -# -TESTING() { - SPACES=" " - echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012' -} - -# Print a line-line message left justified in a field of 70 characters -# beginning with the word "Verifying". -# -VERIFY() { - MESSAGE "Verifying $*" -} - -# This is different from $srcdir/../../bin/output_filter.sh -STDOUT_FILTER() { - result_file=$1 - tmp_file=/tmp/h5test_tmp_$$ - # Filter name of files. - cp $result_file $tmp_file - sed -e '/^Opening file/d' -e '/^Making file/d' \ - < $tmp_file > $result_file - # cleanup - rm -f $tmp_file -} - -# This runs h5repack comparing output with h5dump output -# from -pH option -# -TOOLTEST_DUMP() -{ - echo $@ - infile=$2 - outfile=out-$1.$2 - expect1="$TESTDIR/$1.$2.tst" - actual1="$TESTDIR/$1.$2.out" - actual1_err="$TESTDIR/$1.$2.err" - expect2="$TESTDIR/$2-$1.ddl" - actual2="$TESTDIR/$2-$1.out" - actual2_err="$TESTDIR/$2-$1.err" - - shift - shift - - # Run test. - TESTING $H5REPACK $@ - ( - cd $TESTDIR - $ENVCMD $H5REPACK_BIN "$@" $infile $outfile - ) >$actual1 2>$actual1_err - RET=$? - STDOUT_FILTER $actual1 - cat $actual1_err >> $actual1 - if [ $RET != 0 ] ; then - echo "*FAILED*" - nerrors="`expr $nerrors + 1`" - else - echo " PASSED" - if cmp -s $expect1 $actual1; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.tst) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && diff -c $expect1 $actual1 |sed 's/^/ /' - fi - VERIFY h5dump output -pH $outfile - ( - cd $TESTDIR - $ENVCMD $H5DUMP_BIN -pH $outfile - ) >$actual2 2>$actual2_err - RET=$? - cat $actual2_err >> $actual2 - - if cmp -s $expect2 $actual2; then - echo " PASSED" - else - echo "*FAILED*" - echo " Expected result (*.ddl) differs from actual result (*.out)" - nerrors="`expr $nerrors + 1`" - test yes = "$verbose" && diff -c $expect2 $actual2 |sed 's/^/ /' - fi - - fi - - - rm -f $actual1 $actual1_err $actual2 $actual2_err - rm -f $outfile -} - -############################################################################## -### T H E T E S T S -############################################################################## -# prepare for test -COPY_TESTFILES_TO_TESTDIR - -# Run the test -arg="h5repack_layout.h5 -v -f UD=260,4,9,1,9,235" -TOOLTEST_DUMP plugin_version_test $arg - -arg="h5repack_layout.h5 -v -f UD=257,1,9" -TOOLTEST_DUMP plugin_test $arg - -#arg="h5repack_layout.UD.h5 -v -f NONE" -#TOOLTEST_DUMP plugin_none $arg - -# print results -if test $nerrors -ne 0 ; then - echo "$nerrors errors encountered" - exit_code=$EXIT_FAILURE -else - echo "All Plugin API tests passed." - exit_code=$EXIT_SUCCESS -fi - -# Clean up temporary files/directories -CLEAN_TESTFILES_AND_TESTDIR - -# Clean up temporary files/directories and leave -$RM $PLUGIN_LIBDIR - -exit $exit_code |