summaryrefslogtreecommitdiffstats
path: root/tools/misc/testh5mkgrp.sh.in
diff options
context:
space:
mode:
Diffstat (limited to 'tools/misc/testh5mkgrp.sh.in')
-rw-r--r--tools/misc/testh5mkgrp.sh.in325
1 files changed, 0 insertions, 325 deletions
diff --git a/tools/misc/testh5mkgrp.sh.in b/tools/misc/testh5mkgrp.sh.in
deleted file mode 100644
index a0413e1..0000000
--- a/tools/misc/testh5mkgrp.sh.in
+++ /dev/null
@@ -1,325 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5. The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html. COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page. It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5mkgrp tool
-#
-# Quincey Koziol (koziol@hdfgroup.org)
-# Tuesday, February 13, 2007
-#
-
-srcdir=@srcdir@
-
-TESTNAME=h5mkgrp
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-H5MKGRP=h5mkgrp # The tool name
-H5MKGRP_BIN=`pwd`/$H5MKGRP # The path of the tool binary
-H5LS=h5ls # The h5ls tool name
-H5LS_ARGS=-vr # Arguments to the h5ls tool
-H5LS_BIN=`pwd`/../h5ls/$H5LS # The path of the h5ls tool binary
-
-RM='rm -rf'
-CMP='cmp'
-DIFF='diff -c'
-CP='cp'
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-nerrors=0
-verbose=yes
-
-# source dirs
-SRC_TOOLS="$srcdir/../"
-
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-# testfiles source dirs for tools
-SRC_H5MKGRP_TESTFILES="$SRC_TOOLS/misc/testfiles"
-
-TESTDIR=./testgrp
-test -d $TESTDIR || mkdir -p $TESTDIR
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-# Any test files from other tools can be used in this framework.
-# This list are also used for checking exist.
-# Comment '#' without space can be used.
-# --------------------------------------------------------------------
-
-CMP='cmp -s'
-DIFF='diff -c'
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="
-$SRC_H5MKGRP_TESTFILES/h5mkgrp_help.txt
-$SRC_TOOLS_TESTFILES/h5mkgrp_single.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_single_v.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_single_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_single_l.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several_v.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several_l.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_lp.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_lp.ls
-"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
- # copy test files. Used -f to make sure get a new copy
- for tstfile in $COPY_TESTFILES
- do
- # ignore '#' comment
- echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
- RET=$?
- if [ $RET -eq 1 ]; then
- # skip cp if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=`$DIRNAME $tstfile`
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $CP -f $tstfile $TESTDIR
- if [ $? -ne 0 ]; then
- echo "Error: FAILED to copy $tstfile ."
-
- # Comment out this to CREATE expected file
- exit $EXIT_FAILURE
- fi
- fi
- fi
- done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
- # skip rm if srcdir is same as destdir
- # this occurs when build/test performed in source dir and
- # make cp fail
- SDIR=$SRC_H5MKGRP_TESTFILES
- INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
- INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
- if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
- $RM $TESTDIR
- fi
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-TESTING()
-{
- SPACES=" "
- echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
-}
-
-# Source in the output filter function definitions.
-. $srcdir/../../bin/output_filter.sh
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Verifying".
-#
-VERIFY_H5LS()
-{
- SPACES=" "
- echo "Verifying h5ls file structure $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Run a test and print PASS or *FAIL*. If h5mkgrp can complete
-# with exit status 0, consider it pass. If a test fails then increment
-# the `nerrors' global variable.
-# Assumed arguments:
-# $* arguments for h5mkgrp.
-
-TOOLTEST()
-{
- TESTING $H5MKGRP $@
- (
- cd $TESTDIR
- $RUNSERIAL $H5MKGRP_BIN $@
- ) > output.out
- RET=$?
- if [ $RET != 0 ]; then
- echo "*FAILED*"
- echo "failed result is:"
- cat output.out
- nerrors="`expr $nerrors + 1`"
- else
- echo " PASSED"
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f output.out
- fi
- fi
-}
-
-# Call the h5ls tool to verify the correct output data in the destination file
-#
-H5LSTEST()
-{
- expect="$TESTDIR/`basename $1 .h5`.ls"
- actual="$TESTDIR/`basename $1 .h5`.out"
- actual_sav=${actual}-sav
-
- # Stderr is included in stdout so that the diff can detect
- # any unexpected output from that stream too.
- VERIFY_H5LS $@
- (
- cd $TESTDIR
- $RUNSERIAL $H5LS_BIN $H5LS_ARGS $@
- ) 2>&1 |sed 's/Modified:.*/Modified: XXXX-XX-XX XX:XX:XX XXX/' >$actual
-
- # save actual in case it is needed later.
- cp $actual $actual_sav
- STDOUT_FILTER $actual
- STDERR_FILTER $actual
-
- if [ ! -f $expect ]; then
- # Create the expect file if it doesn't yet exist.
- echo " CREATED"
- cp $actual $expect
- elif $CMP $expect $actual; then
- echo " PASSED"
- else
- echo "*FAILED*"
- echo " Expected result (*.ls) differs from actual result (*.out)"
- nerrors="`expr $nerrors + 1`"
- test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
- fi
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actual $actual_sav
- fi
-}
-
-# Single run of tool
-#
-# Assumed arguments:
-# $1 is test file name
-# $2 is h5mkgrp options
-# $* are groups to create
-RUNTEST()
-{
- FILEOUT=$1
- shift
- H5MKGRP_ARGS=$1
- shift
-
- # Remove any output file left over from previous test run
- rm -f $FILEOUT
-
- # Run test
- TOOLTEST $H5MKGRP_ARGS $FILEOUT $@
-
- # Verify that the file created above is correct
- H5LSTEST $FILEOUT
-
- # Remove output file created, if the "no cleanup" environment variable is
- # not defined
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $TESTDIR/$FILEOUT
- fi
-}
-
-# Single run of tool
-#
-# Assumed arguments:
-# $1 is test expected output file
-# $2 is h5mkgrp options
-# $* are groups to create
-CMPTEST()
-{
- FILEOUT=$1
- expect="$TESTDIR/`basename $1 .h5`.txt"
- actual="$TESTDIR/`basename $1 .h5`.out"
- actual_err="$TESTDIR/`basename $1 .h5`.err"
- shift
-
- # Stderr is included in stdout so that the diff can detect
- # any unexpected output from that stream too.
- TESTING $H5MKGRP $@
- (
- cd $TESTDIR
- $RUNSERIAL $H5MKGRP_BIN $@
- ) >$actual 2>$actual_err
- cat $actual_err >> $actual
-
- if [ ! -f $expect ]; then
- # Create the expect file if it doesn't yet exist.
- echo " CREATED"
- cp $actual $expect
- elif $CMP $expect $actual; then
- echo " PASSED"
- else
- echo "*FAILED*"
- echo " Expected result (*.txt) differs from actual result (*.out)"
- nerrors="`expr $nerrors + 1`"
- test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
- fi
-
- # Clean up output file
- if test -z "$HDF5_NOCLEANUP"; then
- rm -f $actual $actual_err
- fi
-}
-
-##############################################################################
-### T H E T E S T S ###
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-
-# Check that help & version is displayed properly
-CMPTEST h5mkgrp_help.h5 "-h"
-#CMPTEST h5mkgrp_version.h5 "-V"
-
-# Create single group at root level
-RUNTEST h5mkgrp_single.h5 " " single
-RUNTEST h5mkgrp_single_v.h5 "-v" single
-RUNTEST h5mkgrp_single_p.h5 "-p" single
-RUNTEST h5mkgrp_single_l.h5 "-l" latest
-
-# Create several groups at root level
-RUNTEST h5mkgrp_several.h5 " " one two
-RUNTEST h5mkgrp_several_v.h5 "-v" one two
-RUNTEST h5mkgrp_several_p.h5 "-p" one two
-RUNTEST h5mkgrp_several_l.h5 "-l" one two
-
-# Create various nested groups
-RUNTEST h5mkgrp_nested_p.h5 "-p" /one/two
-RUNTEST h5mkgrp_nested_lp.h5 "-lp" /one/two
-RUNTEST h5mkgrp_nested_mult_p.h5 "-p" /one/two /three/four
-RUNTEST h5mkgrp_nested_mult_lp.h5 "-lp" /one/two /three/four
-
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-if test $nerrors -eq 0 ; then
- echo "All $TESTNAME tests passed."
- exit $EXIT_SUCCESS
-else
- echo "$TESTNAME tests failed with $nerrors errors."
- exit $EXIT_FAILURE
-fi
generated by cgit v0.12 at 2024-12-04 06:12:40 (GMT)