1 files changed, 0 insertions, 325 deletions
diff --git a/tools/misc/testh5mkgrp.sh.in b/tools/misc/testh5mkgrp.sh.in
deleted file mode 100644
index a0413e1..0000000
--- a/tools/misc/testh5mkgrp.sh.in
+++ /dev/null
@@ -1,325 +0,0 @@
-#! /bin/sh
-#
-# Copyright by The HDF Group.
-# Copyright by the Board of Trustees of the University of Illinois.
-# All rights reserved.
-#
-# This file is part of HDF5.  The full HDF5 copyright notice, including
-# terms governing use, modification, and redistribution, is contained in
-# the files COPYING and Copyright.html.  COPYING can be found at the root
-# of the source code distribution tree; Copyright.html can be found at the
-# root level of an installed copy of the electronic HDF5 document set and
-# is linked from the top-level documents page.  It can also be found at
-# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-# access to either file, you may request a copy from help@hdfgroup.org.
-#
-# Tests for the h5mkgrp tool
-#
-# Quincey Koziol (koziol@hdfgroup.org)
-# Tuesday, February 13, 2007
-#
-
-srcdir=@srcdir@
-
-TESTNAME=h5mkgrp
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-H5MKGRP=h5mkgrp             # The tool name
-H5MKGRP_BIN=`pwd`/$H5MKGRP  # The path of the tool binary
-H5LS=h5ls                   # The h5ls tool name 
-H5LS_ARGS=-vr               # Arguments to the h5ls tool
-H5LS_BIN=`pwd`/../h5ls/$H5LS # The path of the h5ls tool binary
-
-RM='rm -rf'
-CMP='cmp'
-DIFF='diff -c'
-CP='cp'
-DIRNAME='dirname'
-LS='ls'
-AWK='awk'
-
-nerrors=0
-verbose=yes
-
-# source dirs
-SRC_TOOLS="$srcdir/../"
-
-SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
-# testfiles source dirs for tools
-SRC_H5MKGRP_TESTFILES="$SRC_TOOLS/misc/testfiles"
-
-TESTDIR=./testgrp
-test -d $TESTDIR || mkdir -p $TESTDIR
-
-######################################################################
-# test files
-# --------------------------------------------------------------------
-# All the test files copy from source directory to test directory
-# NOTE: Keep this framework to add/remove test files.
-#       Any test files from other tools can be used in this framework.
-#       This list are also used for checking exist.
-#       Comment '#' without space can be used.
-# --------------------------------------------------------------------
-
-CMP='cmp -s'
-DIFF='diff -c'
-
-#
-# copy test files and expected output files from source dirs to test dir
-#
-COPY_TESTFILES="
-$SRC_H5MKGRP_TESTFILES/h5mkgrp_help.txt
-$SRC_TOOLS_TESTFILES/h5mkgrp_single.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_single_v.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_single_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_single_l.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several_v.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_several_l.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_lp.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_p.ls
-$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_lp.ls
-"
-
-COPY_TESTFILES_TO_TESTDIR()
-{
-    # copy test files. Used -f to make sure get a new copy
-    for tstfile in $COPY_TESTFILES
-    do
-        # ignore '#' comment
-        echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
-        RET=$?
-        if [ $RET -eq 1 ]; then
-            # skip cp if srcdir is same as destdir
-            # this occurs when build/test performed in source dir and
-            # make cp fail
-            SDIR=`$DIRNAME $tstfile`
-            INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-            INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-            if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-                $CP -f $tstfile $TESTDIR
-                if [ $? -ne 0 ]; then
-                    echo "Error: FAILED to copy $tstfile ."
-                
-                    # Comment out this to CREATE expected file
-                    exit $EXIT_FAILURE
-                fi
-            fi
-        fi
-    done
-}
-
-CLEAN_TESTFILES_AND_TESTDIR()
-{
-    # skip rm if srcdir is same as destdir
-    # this occurs when build/test performed in source dir and
-    # make cp fail
-    SDIR=$SRC_H5MKGRP_TESTFILES
-    INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
-    INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
-    if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
-        $RM $TESTDIR
-    fi
-}
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Testing".
-TESTING() 
-{
-    SPACES="                                                               "
-    echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012'
-}
-
-# Source in the output filter function definitions.
-. $srcdir/../../bin/output_filter.sh 
-
-# Print a line-line message left justified in a field of 70 characters
-# beginning with the word "Verifying".
-#
-VERIFY_H5LS() 
-{
-    SPACES="                                                               "
-    echo "Verifying h5ls file structure $* $SPACES" | cut -c1-70 | tr -d '\012'
-}
-
-# Run a test and print PASS or *FAIL*. If h5mkgrp can complete
-# with exit status 0, consider it pass. If a test fails then increment
-# the `nerrors' global variable.
-# Assumed arguments:
-# $* arguments for h5mkgrp.
-
-TOOLTEST() 
-{
-    TESTING $H5MKGRP $@
-    (
-    cd $TESTDIR
-    $RUNSERIAL $H5MKGRP_BIN $@
-    ) > output.out
-    RET=$?
-    if [ $RET != 0 ]; then
-        echo "*FAILED*"
-        echo "failed result is:"
-        cat output.out
-        nerrors="`expr $nerrors + 1`"
-    else
-        echo " PASSED"
-
-        # Clean up output file
-        if test -z "$HDF5_NOCLEANUP"; then
-           rm -f output.out
-        fi
-    fi
-}
-
-# Call the h5ls tool to verify the correct output data in the destination file
-#
-H5LSTEST() 
-{
-    expect="$TESTDIR/`basename $1 .h5`.ls"
-    actual="$TESTDIR/`basename $1 .h5`.out"
-    actual_sav=${actual}-sav
-
-    # Stderr is included in stdout so that the diff can detect
-    # any unexpected output from that stream too.
-    VERIFY_H5LS  $@
-    (
-      cd $TESTDIR
-      $RUNSERIAL $H5LS_BIN $H5LS_ARGS $@
-    ) 2>&1 |sed 's/Modified:.*/Modified:  XXXX-XX-XX XX:XX:XX XXX/' >$actual
-
-    # save actual in case it is needed later.
-    cp $actual $actual_sav
-    STDOUT_FILTER $actual
-    STDERR_FILTER $actual
-
-   if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-    echo " CREATED"
-    cp $actual $expect
-   elif $CMP $expect $actual; then
-      echo " PASSED"
-   else
-      echo "*FAILED*"
-      echo "    Expected result (*.ls) differs from actual result (*.out)"
-      nerrors="`expr $nerrors + 1`"
-      test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-   fi
-
-   # Clean up output file
-   if test -z "$HDF5_NOCLEANUP"; then
-      rm -f $actual $actual_sav
-   fi
-}
-
-# Single run of tool
-#
-# Assumed arguments:
-# $1 is test file name
-# $2 is h5mkgrp options
-# $* are groups to create
-RUNTEST() 
-{
-    FILEOUT=$1
-    shift
-    H5MKGRP_ARGS=$1
-    shift
-
-    # Remove any output file left over from previous test run
-    rm -f $FILEOUT
-
-    # Run test
-    TOOLTEST $H5MKGRP_ARGS $FILEOUT $@
-
-    # Verify that the file created above is correct
-    H5LSTEST $FILEOUT
-
-    # Remove output file created, if the "no cleanup" environment variable is
-    #   not defined
-    if test -z "$HDF5_NOCLEANUP"; then
-        rm -f $TESTDIR/$FILEOUT
-    fi
-}
-
-# Single run of tool
-#
-# Assumed arguments:
-# $1 is test expected output file
-# $2 is h5mkgrp options
-# $* are groups to create
-CMPTEST() 
-{
-    FILEOUT=$1
-    expect="$TESTDIR/`basename $1 .h5`.txt"
-    actual="$TESTDIR/`basename $1 .h5`.out"
-    actual_err="$TESTDIR/`basename $1 .h5`.err"
-    shift
-
-    # Stderr is included in stdout so that the diff can detect
-    # any unexpected output from that stream too.
-    TESTING $H5MKGRP $@
-    (
-    cd $TESTDIR
-    $RUNSERIAL $H5MKGRP_BIN $@
-    ) >$actual 2>$actual_err
-    cat $actual_err >> $actual
-    
-   if [ ! -f $expect ]; then
-    # Create the expect file if it doesn't yet exist.
-    echo " CREATED"
-    cp $actual $expect
-   elif $CMP $expect $actual; then
-      echo " PASSED"
-   else
-      echo "*FAILED*"
-      echo "    Expected result (*.txt) differs from actual result (*.out)"
-      nerrors="`expr $nerrors + 1`"
-      test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/    /'
-   fi
-
-   # Clean up output file
-   if test -z "$HDF5_NOCLEANUP"; then
-      rm -f $actual $actual_err
-   fi
-}
-
-##############################################################################
-###           T H E   T E S T S                                            ###
-##############################################################################
-# prepare for test
-COPY_TESTFILES_TO_TESTDIR
-
-# Check that help & version is displayed properly
-CMPTEST h5mkgrp_help.h5 "-h"
-#CMPTEST h5mkgrp_version.h5 "-V"
-
-# Create single group at root level
-RUNTEST h5mkgrp_single.h5 " " single
-RUNTEST h5mkgrp_single_v.h5 "-v" single
-RUNTEST h5mkgrp_single_p.h5 "-p" single
-RUNTEST h5mkgrp_single_l.h5 "-l" latest
-
-# Create several groups at root level
-RUNTEST h5mkgrp_several.h5 " " one two
-RUNTEST h5mkgrp_several_v.h5 "-v" one two
-RUNTEST h5mkgrp_several_p.h5 "-p" one two
-RUNTEST h5mkgrp_several_l.h5 "-l" one two
-
-# Create various nested groups 
-RUNTEST h5mkgrp_nested_p.h5 "-p" /one/two
-RUNTEST h5mkgrp_nested_lp.h5 "-lp" /one/two
-RUNTEST h5mkgrp_nested_mult_p.h5 "-p" /one/two /three/four
-RUNTEST h5mkgrp_nested_mult_lp.h5 "-lp" /one/two /three/four
-
-# Clean up temporary files/directories
-CLEAN_TESTFILES_AND_TESTDIR
-
-if test $nerrors -eq 0 ; then
-    echo "All $TESTNAME tests passed."
-    exit $EXIT_SUCCESS
-else
-    echo "$TESTNAME tests failed with $nerrors errors."
-    exit $EXIT_FAILURE
-fi