diff options
Diffstat (limited to 'tools/perform/chunk.c')
| -rw-r--r-- | tools/perform/chunk.c | 550 |
1 files changed, 0 insertions, 550 deletions
diff --git a/tools/perform/chunk.c b/tools/perform/chunk.c deleted file mode 100644 index b1419ee..0000000 --- a/tools/perform/chunk.c +++ /dev/null @@ -1,550 +0,0 @@ -/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * Copyright by The HDF Group. * - * Copyright by the Board of Trustees of the University of Illinois. * - * All rights reserved. * - * * - * This file is part of HDF5. The full HDF5 copyright notice, including * - * terms governing use, modification, and redistribution, is contained in * - * the files COPYING and Copyright.html. COPYING can be found at the root * - * of the source code distribution tree; Copyright.html can be found at the * - * root level of an installed copy of the electronic HDF5 document set and * - * is linked from the top-level documents page. It can also be found at * - * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have * - * access to either file, you may request a copy from help@hdfgroup.org. * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ - -/* - * Programmer: Robb Matzke <robb@arborea.spizella.com> - * Thursday, May 14, 1998 - * - * Purpose: Checks the effect of various I/O request sizes and raw data - * cache sizes. Performance depends on the amount of data read - * from disk and we use a filter to get that number. - */ - -/* See H5private.h for how to include headers */ -#undef NDEBUG -#include "hdf5.h" - -#ifdef H5_STDC_HEADERS -# include <assert.h> -# include <stdio.h> -# include <stdlib.h> -# include <string.h> -#endif - -/* Solaris Studio defines attribute, but for the attributes we need */ -#if !defined(H5_HAVE_ATTRIBUTE) || defined __cplusplus || defined(__SUNPRO_C) -# undef __attribute__ -# define __attribute__(X) /*void*/ -# define H5_ATTR_UNUSED /*void*/ -#else -# define H5_ATTR_UNUSED __attribute__((unused)) -#endif - -#define FILE_NAME "chunk.h5" -#define LINESPOINTS "lines" -#define CH_SIZE 100 /*squared in terms of bytes */ -#define DS_SIZE 20 /*squared in terms of chunks */ -#define FILTER_COUNTER 305 -#define READ 0 -#define WRITE 1 -#define MIN(X,Y) ((X)<(Y)?(X):(Y)) -#define MAX(X,Y) ((X)>(Y)?(X):(Y)) -#define SQUARE(X) ((X)*(X)) - -/* The row-major test */ -#define RM_CACHE_STRT 25 -#define RM_CACHE_END 25 -#define RM_CACHE_DELT 5 -#define RM_START (double)0.50F -#define RM_END (double)5.00F -#define RM_DELTA (double)0.50F -#define RM_W0 0.0F -#define RM_NRDCC 521 - -/* Diagonal test */ -#define DIAG_CACHE_STRT 25 -#define DIAG_CACHE_END 25 -#define DIAG_CACHE_DELT 5 -#define DIAG_START (double)0.50F -#define DIAG_END (double)5.00F -#define DIAG_DELTA (double)0.50F -/* #define DIAG_W0 0.65F */ -/* #define DIAG_NRDCC 521 */ - -static size_t nio_g; -static hid_t fapl_g = -1; - -/* Local function prototypes */ -static size_t -counter (unsigned H5_ATTR_UNUSED flags, size_t cd_nelmts, - const unsigned *cd_values, size_t nbytes, - size_t *buf_size, void **buf); - -/* This message derives from H5Z */ -const H5Z_class2_t H5Z_COUNTER[1] = {{ - H5Z_CLASS_T_VERS, /* H5Z_class_t version */ - FILTER_COUNTER, /* Filter id number */ - 1, 1, /* Encoding and decoding enabled */ - "counter", /* Filter name for debugging */ - NULL, /* The "can apply" callback */ - NULL, /* The "set local" callback */ - counter, /* The actual filter function */ -}}; - - -/*------------------------------------------------------------------------- - * Function: counter - * - * Purpose: Count number of bytes but don't do anything. - * - * Return: Success: src_nbytes-1 - * - * Failure: never fails - * - * Programmer: Robb Matzke - * Thursday, May 14, 1998 - * - * Modifications: - * - *------------------------------------------------------------------------- - */ -static size_t -counter (unsigned H5_ATTR_UNUSED flags, size_t H5_ATTR_UNUSED cd_nelmts, - const unsigned H5_ATTR_UNUSED *cd_values, size_t nbytes, - size_t H5_ATTR_UNUSED *buf_size, void H5_ATTR_UNUSED **buf) -{ - nio_g += nbytes; - return nbytes; -} - - -/*------------------------------------------------------------------------- - * Function: create_dataset - * - * Purpose: Creates a square dataset with square chunks, registers a - * stupid compress/uncompress pair for counting I/O, and - * initializes the dataset. The chunk size is in bytes, the - * dataset size is in terms of chunks. - * - * Return: void - * - * Programmer: Robb Matzke - * Thursday, May 14, 1998 - * - * Modifications: - * - *------------------------------------------------------------------------- - */ -static void -create_dataset (void) -{ - hid_t file, space, dcpl, dset; - hsize_t size[2]; - signed char *buf; - - /* The file */ - file = H5Fcreate (FILE_NAME, H5F_ACC_TRUNC, H5P_DEFAULT, fapl_g); - - /* The data space */ - size[0] = size[1] = DS_SIZE * CH_SIZE; - space = H5Screate_simple(2, size, size); - - /* The storage layout and compression */ - dcpl = H5Pcreate(H5P_DATASET_CREATE); - size[0] = size[1] = CH_SIZE; - H5Pset_chunk(dcpl, 2, size); - H5Zregister(H5Z_COUNTER); - H5Pset_filter(dcpl, FILTER_COUNTER, 0, 0, NULL); - - /* The dataset */ - dset = H5Dcreate2(file, "dset", H5T_NATIVE_SCHAR, space, H5P_DEFAULT, dcpl, H5P_DEFAULT); - assert(dset>=0); - - /* The data */ - buf = (signed char *)calloc(1, SQUARE (DS_SIZE*CH_SIZE)); - H5Dwrite(dset, H5T_NATIVE_SCHAR, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf); - free(buf); - - /* Close */ - H5Dclose(dset); - H5Sclose(space); - H5Pclose(dcpl); - H5Fclose(file); -} - - -/*------------------------------------------------------------------------- - * Function: test_rowmaj - * - * Purpose: Reads the entire dataset using the specified size-squared - * I/O requests in row major order. - * - * Return: Efficiency: data requested divided by data actually read. - * - * Programmer: Robb Matzke - * Thursday, May 14, 1998 - * - * Modifications: - * - *------------------------------------------------------------------------- - */ -static double -test_rowmaj (int op, size_t cache_size, size_t io_size) -{ - hid_t file, dset, mem_space, file_space; - signed char *buf = (signed char *)calloc (1, (size_t)(SQUARE(io_size))); - hsize_t i, j, hs_size[2]; - hsize_t hs_offset[2]; - int mdc_nelmts; - size_t rdcc_nelmts; - double w0; - - H5Pget_cache (fapl_g, &mdc_nelmts, &rdcc_nelmts, NULL, &w0); -#ifdef RM_W0 - w0 = RM_W0; -#endif -#ifdef RM_NRDCC - rdcc_nelmts = RM_NRDCC; -#endif - H5Pset_cache (fapl_g, mdc_nelmts, rdcc_nelmts, - cache_size*SQUARE (CH_SIZE), w0); - file = H5Fopen(FILE_NAME, H5F_ACC_RDWR, fapl_g); - dset = H5Dopen2(file, "dset", H5P_DEFAULT); - file_space = H5Dget_space(dset); - nio_g = 0; - - for (i=0; i<CH_SIZE*DS_SIZE; i+=io_size) { -#if 0 - fprintf (stderr, "%5d\b\b\b\b\b", (int)i); - fflush (stderr); -#endif - for (j=0; j<CH_SIZE*DS_SIZE; j+=io_size) { - hs_offset[0] = i; - hs_size[0] = MIN (io_size, CH_SIZE*DS_SIZE-i); - hs_offset[1] = j; - hs_size[1] = MIN (io_size, CH_SIZE*DS_SIZE-j); - mem_space = H5Screate_simple (2, hs_size, hs_size); - H5Sselect_hyperslab (file_space, H5S_SELECT_SET, hs_offset, - NULL, hs_size, NULL); - - if (READ==op) { - H5Dread (dset, H5T_NATIVE_SCHAR, mem_space, file_space, - H5P_DEFAULT, buf); - } else { - H5Dwrite (dset, H5T_NATIVE_SCHAR, mem_space, file_space, - H5P_DEFAULT, buf); - } - H5Sclose (mem_space); - } - } - - free (buf); - H5Sclose (file_space); - H5Dclose (dset); - H5Fclose (file); - - return (double)SQUARE(CH_SIZE*DS_SIZE)/(double)nio_g; -} - - -/*------------------------------------------------------------------------- - * Function: test_diag - * - * Purpose: Reads windows diagonally across the dataset. Each window is - * offset from the previous window by OFFSET in the x and y - * directions. The reading ends after the (k,k) value is read - * where k is the maximum index in the dataset. - * - * Return: Efficiency. - * - * Programmer: Robb Matzke - * Friday, May 15, 1998 - * - * Modifications: - * - *------------------------------------------------------------------------- - */ -static double -test_diag (int op, size_t cache_size, size_t io_size, size_t offset) -{ - hid_t file, dset, mem_space, file_space; - hsize_t i, hs_size[2]; - hsize_t nio = 0; - hsize_t hs_offset[2]; - signed char *buf = (signed char *)calloc(1, (size_t)(SQUARE (io_size))); - int mdc_nelmts; - size_t rdcc_nelmts; - double w0; - - H5Pget_cache (fapl_g, &mdc_nelmts, &rdcc_nelmts, NULL, &w0); -#ifdef DIAG_W0 - w0 = DIAG_W0; -#endif -#ifdef DIAG_NRDCC - rdcc_nelmts = DIAG_NRDCC; -#endif - H5Pset_cache (fapl_g, mdc_nelmts, rdcc_nelmts, - cache_size*SQUARE (CH_SIZE), w0); - file = H5Fopen(FILE_NAME, H5F_ACC_RDWR, fapl_g); - dset = H5Dopen2(file, "dset", H5P_DEFAULT); - file_space = H5Dget_space(dset); - nio_g = 0; - - for (i=0, hs_size[0]=io_size; hs_size[0]==io_size; i+=offset) { - hs_offset[0] = hs_offset[1] = i; - hs_size[0] = hs_size[1] = MIN (io_size, CH_SIZE*DS_SIZE-i); - mem_space = H5Screate_simple (2, hs_size, hs_size); - H5Sselect_hyperslab (file_space, H5S_SELECT_SET, hs_offset, NULL, - hs_size, NULL); - if (READ==op) { - H5Dread (dset, H5T_NATIVE_SCHAR, mem_space, file_space, - H5P_DEFAULT, buf); - } else { - H5Dwrite (dset, H5T_NATIVE_SCHAR, mem_space, file_space, - H5P_DEFAULT, buf); - } - H5Sclose (mem_space); - nio += hs_size[0]*hs_size[1]; - if (i>0) nio -= SQUARE (io_size-offset); - } - - free (buf); - H5Sclose (file_space); - H5Dclose (dset); - H5Fclose (file); - - /* - * The extra cast in the following statement is a bug workaround for the - * Win32 version 5.0 compiler. - * 1998-11-06 ptl - */ - return (double)nio/(double)nio_g; -} - - -/*------------------------------------------------------------------------- - * Function: main - * - * Purpose: See file prologue. - * - * Return: Success: - * - * Failure: - * - * Programmer: Robb Matzke - * Thursday, May 14, 1998 - * - * Modifications: - * - *------------------------------------------------------------------------- - */ -int -main (void) -{ - size_t io_size; - double effic, io_percent; - FILE *f, *d; - size_t cache_size; - double w0; - - /* - * Create a global file access property list. - */ - fapl_g = H5Pcreate (H5P_FILE_ACCESS); - H5Pget_cache (fapl_g, NULL, NULL, NULL, &w0); - - /* Create the file */ - create_dataset (); - f = fopen ("x-gnuplot", "w"); - - printf("Test %8s %8s %8s\n", "CacheSz", "ChunkSz", "Effic"); - printf("--------- -------- -------- --------\n"); - -#if 1 - /* - * Test row-major reading of the dataset with various sizes of request - * windows. - */ - if (RM_CACHE_STRT==RM_CACHE_END) { - fprintf (f, "set yrange [0:1.2]\n"); - fprintf (f, "set ytics 0, 0.1, 1\n"); - fprintf (f, "set xlabel \"%s\"\n", - "Request size as a fraction of chunk size"); - fprintf (f, "set ylabel \"Efficiency\"\n"); - fprintf (f, "set title \"Cache %d chunks, w0=%g, " - "Size=(total=%d, chunk=%d)\"\n", - RM_CACHE_STRT, w0, DS_SIZE*CH_SIZE, CH_SIZE); - } else { - fprintf (f, "set autoscale\n"); - fprintf (f, "set hidden3d\n"); - } - - fprintf (f, "set terminal postscript\nset output \"x-rowmaj-rd.ps\"\n"); - fprintf (f, "%s \"x-rowmaj-rd.dat\" title \"RowMaj-Read\" with %s\n", - RM_CACHE_STRT==RM_CACHE_END?"plot":"splot", - LINESPOINTS); - fprintf (f, "set terminal x11\nreplot\n"); - d = fopen ("x-rowmaj-rd.dat", "w"); - for (cache_size=RM_CACHE_STRT; - cache_size<=RM_CACHE_END; - cache_size+=RM_CACHE_DELT) { - for (io_percent=RM_START; io_percent<=RM_END; io_percent+=RM_DELTA) { - io_size = MAX (1, (size_t)(CH_SIZE*io_percent)); - printf ("Rowmaj-rd %8d %8.2f", (int)cache_size, io_percent); - fflush (stdout); - effic = test_rowmaj (READ, cache_size, io_size); - printf (" %8.2f\n", effic); - if (RM_CACHE_STRT==RM_CACHE_END) { - fprintf (d, "%g %g\n", io_percent, effic); - } else { - fprintf (d, "%g\n", effic); - } - } - fprintf (d, "\n"); - } - fclose (d); - fprintf (f, "pause -1\n"); -#endif - -#if 1 - /* - * Test row-major writing of the dataset with various sizes of request - * windows. - */ - if (RM_CACHE_STRT==RM_CACHE_END) { - fprintf (f, "set yrange [0:1.2]\n"); - fprintf (f, "set ytics 0, 0.1, 1\n"); - fprintf (f, "set xlabel \"%s\"\n", - "Request size as a fraction of chunk size"); - fprintf (f, "set ylabel \"Efficiency\"\n"); - fprintf (f, "set title \"Cache %d chunks,w0=%g, " - "Size=(total=%d, chunk=%d)\"\n", - RM_CACHE_STRT, w0, DS_SIZE*CH_SIZE, CH_SIZE); - } else { - fprintf (f, "set autoscale\n"); - fprintf (f, "set hidden3d\n"); - } - - fprintf (f, "set terminal postscript\nset output \"x-rowmaj-wr.ps\"\n"); - fprintf (f, "%s \"x-rowmaj-wr.dat\" title \"RowMaj-Write\" with %s\n", - RM_CACHE_STRT==RM_CACHE_END?"plot":"splot", - LINESPOINTS); - fprintf (f, "set terminal x11\nreplot\n"); - d = fopen ("x-rowmaj-wr.dat", "w"); - for (cache_size=RM_CACHE_STRT; - cache_size<=RM_CACHE_END; - cache_size+=RM_CACHE_DELT) { - for (io_percent=RM_START; io_percent<=RM_END; io_percent+=RM_DELTA) { - io_size = MAX (1, (size_t)(CH_SIZE*io_percent)); - printf ("Rowmaj-wr %8d %8.2f", (int)cache_size, io_percent); - fflush (stdout); - effic = test_rowmaj (WRITE, cache_size, io_size); - printf (" %8.2f\n", effic); - if (RM_CACHE_STRT==RM_CACHE_END) { - fprintf (d, "%g %g\n", io_percent, effic); - } else { - fprintf (d, "%g\n", effic); - } - } - fprintf (d, "\n"); - } - fclose (d); - fprintf (f, "pause -1\n"); -#endif - -#if 1 - /* - * Test diagonal read - */ - if (DIAG_CACHE_STRT==DIAG_CACHE_END) { - fprintf (f, "set yrange [0:1.2]\n"); - fprintf (f, "set ytics 0, 0.1, 1\n"); - fprintf (f, "set xlabel \"%s\"\n", - "Request size as a fraction of chunk size"); - fprintf (f, "set ylabel \"Efficiency\"\n"); - fprintf (f, "set title \"Cache %d chunks,w0=%g, " - "Size=(total=%d, chunk=%d)\"\n", - DIAG_CACHE_STRT, w0, DS_SIZE*CH_SIZE, CH_SIZE); - } else { - fprintf (f, "set autoscale\n"); - fprintf (f, "set hidden3d\n"); - } - fprintf (f, "set terminal postscript\nset output \"x-diag-rd.ps\"\n"); - fprintf (f, "%s \"x-diag-rd.dat\" title \"Diag-Read\" with %s\n", - DIAG_CACHE_STRT==DIAG_CACHE_END?"plot":"splot", LINESPOINTS); - fprintf (f, "set terminal x11\nreplot\n"); - d = fopen ("x-diag-rd.dat", "w"); - for (cache_size=DIAG_CACHE_STRT; - cache_size<=DIAG_CACHE_END; - cache_size+=DIAG_CACHE_DELT) { - for (io_percent=DIAG_START; io_percent<=DIAG_END; io_percent+=DIAG_DELTA) { - io_size = MAX (1, (size_t)(CH_SIZE*io_percent)); - printf ("Diag-rd %8d %8.2f", (int)cache_size, io_percent); - fflush (stdout); - effic = test_diag (READ, cache_size, io_size, MAX (1, io_size/2)); - printf (" %8.2f\n", effic); - if (DIAG_CACHE_STRT==DIAG_CACHE_END) { - fprintf (d, "%g %g\n", io_percent, effic); - } else { - fprintf (d, "%g\n", effic); - } - } - fprintf (d, "\n"); - } - fclose (d); - fprintf (f, "pause -1\n"); -#endif - -#if 1 - /* - * Test diagonal write - */ - if (DIAG_CACHE_STRT==DIAG_CACHE_END) { - fprintf (f, "set yrange [0:1.2]\n"); - fprintf (f, "set ytics 0, 0.1, 1\n"); - fprintf (f, "set xlabel \"%s\"\n", - "Request size as a fraction of chunk size"); - fprintf (f, "set ylabel \"Efficiency\"\n"); - fprintf (f, "set title \"Cache %d chunks, w0=%g, " - "Size=(total=%d, chunk=%d)\"\n", - DIAG_CACHE_STRT, w0, DS_SIZE*CH_SIZE, CH_SIZE); - } else { - fprintf (f, "set autoscale\n"); - fprintf (f, "set hidden3d\n"); - } - fprintf (f, "set terminal postscript\nset output \"x-diag-wr.ps\"\n"); - fprintf (f, "%s \"x-diag-wr.dat\" title \"Diag-Write\" with %s\n", - DIAG_CACHE_STRT==DIAG_CACHE_END?"plot":"splot", LINESPOINTS); - fprintf (f, "set terminal x11\nreplot\n"); - d = fopen ("x-diag-wr.dat", "w"); - for (cache_size=DIAG_CACHE_STRT; - cache_size<=DIAG_CACHE_END; - cache_size+=DIAG_CACHE_DELT) { - for (io_percent=DIAG_START; - io_percent<=DIAG_END; - io_percent+=DIAG_DELTA) { - io_size = MAX (1, (size_t)(CH_SIZE*io_percent)); - printf ("Diag-wr %8d %8.2f", (int)cache_size, io_percent); - fflush (stdout); - effic = test_diag (WRITE, cache_size, io_size, MAX (1, io_size/2)); - printf (" %8.2f\n", effic); - if (DIAG_CACHE_STRT==DIAG_CACHE_END) { - fprintf (d, "%g %g\n", io_percent, effic); - } else { - fprintf (d, "%g\n", effic); - } - } - fprintf (d, "\n"); - } - fclose (d); - fprintf (f, "pause -1\n"); -#endif - - - H5Pclose (fapl_g); - fclose (f); - return 0; -} - |