summaryrefslogtreecommitdiffstats
path: root/tools/perform/perf.c
diff options
context:
space:
mode:
Diffstat (limited to 'tools/perform/perf.c')
-rw-r--r--tools/perform/perf.c482
1 files changed, 482 insertions, 0 deletions
diff --git a/tools/perform/perf.c b/tools/perform/perf.c
new file mode 100644
index 0000000..7d329f0
--- /dev/null
+++ b/tools/perform/perf.c
@@ -0,0 +1,482 @@
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
+ * Copyright by The HDF Group. *
+ * Copyright by the Board of Trustees of the University of Illinois. *
+ * All rights reserved. *
+ * *
+ * This file is part of HDF5. The full HDF5 copyright notice, including *
+ * terms governing use, modification, and redistribution, is contained in *
+ * the files COPYING and Copyright.html. COPYING can be found at the root *
+ * of the source code distribution tree; Copyright.html can be found at the *
+ * root level of an installed copy of the electronic HDF5 document set and *
+ * is linked from the top-level documents page. It can also be found at *
+ * http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have *
+ * access to either file, you may request a copy from help@hdfgroup.org. *
+ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+/*
+ * Author: Albert Cheng of NCSA, May 1, 2001.
+ * This is derived from code given to me by Robert Ross.
+ *
+ * NOTE: This code assumes that all command line arguments make it out to all
+ * the processes that make up the parallel job, which isn't always the case.
+ * So if it doesn't work on some platform, that might be why.
+ */
+
+#include "hdf5.h"
+#include "H5private.h"
+#ifdef H5_HAVE_PARALLEL
+#include <stdio.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#ifdef H5_HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <errno.h>
+#include <string.h>
+#if defined(H5_TIME_WITH_SYS_TIME)
+# include <sys/time.h>
+# include <time.h>
+#elif defined(H5_HAVE_SYS_TIME_H)
+# include <sys/time.h>
+#else
+# include <time.h>
+#endif
+#include <mpi.h>
+#ifndef MPI_FILE_NULL /*MPIO may be defined in mpi.h already */
+# include <mpio.h>
+#endif
+
+/* Macro definitions */
+/* Verify:
+ * if val is false (0), print mesg and if fatal is true (non-zero), die.
+ */
+#define H5FATAL 1
+#define VRFY(val, mesg, fatal) do { \
+ if (!val) { \
+ printf("Proc %d: ", mynod); \
+ printf("*** Assertion failed (%s) at line %4d in %s\n", \
+ mesg, (int)__LINE__, __FILE__); \
+ if (fatal){ \
+ fflush(stdout); \
+ goto die_jar_jar_die; \
+ } \
+ } \
+} while(0)
+#define RANK 1
+#define MAX_PATH 1024
+
+hsize_t dims[RANK]; /* dataset dim sizes */
+hsize_t block[RANK], stride[RANK], count[RANK];
+hssize_t start[RANK];
+hid_t fid; /* HDF5 file ID */
+hid_t acc_tpl; /* File access templates */
+hid_t sid; /* Dataspace ID */
+hid_t file_dataspace; /* File dataspace ID */
+hid_t mem_dataspace; /* memory dataspace ID */
+hid_t dataset; /* Dataset ID */
+hsize_t opt_alignment = 1;
+hsize_t opt_threshold = 1;
+int opt_split_vfd = 0;
+char *meta_ext, *raw_ext; /* holds the meta and raw file extension if */
+ /* opt_split_vfd is set */
+
+
+/* DEFAULT VALUES FOR OPTIONS */
+int64_t opt_block = 1048576*16;
+int opt_iter = 1;
+int opt_stripe = -1;
+int opt_correct = 0;
+int amode = O_RDWR | O_CREAT;
+char opt_file[256] = "perftest.out";
+char opt_pvfstab[256] = "notset";
+int opt_pvfstab_set = 0;
+
+const char *FILENAME[] = {
+ opt_file,
+ NULL
+};
+
+/* function prototypes */
+static int parse_args(int argc, char **argv);
+
+extern int errno;
+
+/* globals needed for getopt */
+extern char *optarg;
+
+int main(int argc, char **argv)
+{
+ char *buf, *tmp, *buf2, *tmp2, *check;
+ int i, j, mynod=0, nprocs=1, err, my_correct = 1, correct, myerrno;
+ double stim, etim;
+ double write_tim = 0;
+ double read_tim = 0;
+ double read_bw, write_bw;
+ double max_read_tim, max_write_tim;
+ double min_read_tim, min_write_tim;
+ double ave_read_tim, ave_write_tim;
+ int64_t iter_jump = 0;
+ int64_t seek_position = 0;
+ MPI_File fh;
+ MPI_Status status;
+ int nchars;
+ char filename[MAX_PATH];
+ herr_t ret; /* Generic return value */
+
+ /* startup MPI and determine the rank of this process */
+ MPI_Init(&argc,&argv);
+ MPI_Comm_size(MPI_COMM_WORLD, &nprocs);
+ MPI_Comm_rank(MPI_COMM_WORLD, &mynod);
+
+ /* parse the command line arguments */
+ parse_args(argc, argv);
+
+ if (mynod == 0) printf("# Using hdf5-io calls.\n");
+
+ /* kindof a weird hack- if the location of the pvfstab file was
+ * specified on the command line, then spit out this location into
+ * the appropriate environment variable: */
+
+#if H5_HAVE_SETENV
+/* no setenv or unsetenv */
+ if (opt_pvfstab_set) {
+ if((setenv("PVFSTAB_FILE", opt_pvfstab, 1)) < 0){
+ perror("setenv");
+ goto die_jar_jar_die;
+ }
+ }
+#endif
+
+ /* this is how much of the file data is covered on each iteration of
+ * the test. used to help determine the seek offset on each
+ * iteration */
+ iter_jump = nprocs * opt_block;
+
+ /* setup a buffer of data to write */
+ if (!(tmp = (char *) malloc(opt_block + 256))) {
+ perror("malloc");
+ goto die_jar_jar_die;
+ }
+ buf = tmp + 128 - (((long)tmp) % 128); /* align buffer */
+
+ if (opt_correct) {
+ /* do the same buffer setup for verifiable data */
+ if (!(tmp2 = (char *) malloc(opt_block + 256))) {
+ perror("malloc2");
+ goto die_jar_jar_die;
+ }
+ buf2 = tmp + 128 - (((long)tmp) % 128);
+ }
+
+ /* setup file access template with parallel IO access. */
+ if (opt_split_vfd){
+ hid_t mpio_pl;
+
+ mpio_pl = H5Pcreate (H5P_FILE_ACCESS);
+ VRFY((acc_tpl >= 0), "", H5FATAL);
+ ret = H5Pset_fapl_mpio(mpio_pl, MPI_COMM_WORLD, MPI_INFO_NULL);
+ VRFY((ret >= 0), "", H5FATAL);
+
+ /* set optional allocation alignment */
+ if (opt_alignment*opt_threshold != 1){
+ ret = H5Pset_alignment(acc_tpl, opt_threshold, opt_alignment );
+ VRFY((ret >= 0), "H5Pset_alignment succeeded", !H5FATAL);
+ }
+
+ /* setup file access template */
+ acc_tpl = H5Pcreate (H5P_FILE_ACCESS);
+ VRFY((acc_tpl >= 0), "", H5FATAL);
+ ret = H5Pset_fapl_split(acc_tpl, meta_ext, mpio_pl, raw_ext, mpio_pl);
+ VRFY((ret >= 0), "H5Pset_fapl_split succeeded", H5FATAL);
+ ret = H5Pclose(mpio_pl);
+ VRFY((ret >= 0), "H5Pclose mpio_pl succeeded", H5FATAL);
+ }else{
+ /* setup file access template */
+ acc_tpl = H5Pcreate (H5P_FILE_ACCESS);
+ VRFY((acc_tpl >= 0), "", H5FATAL);
+ ret = H5Pset_fapl_mpio(acc_tpl, MPI_COMM_WORLD, MPI_INFO_NULL);
+ VRFY((ret >= 0), "", H5FATAL);
+
+ /* set optional allocation alignment */
+ if (opt_alignment*opt_threshold != 1){
+ ret = H5Pset_alignment(acc_tpl, opt_threshold, opt_alignment );
+ VRFY((ret >= 0), "H5Pset_alignment succeeded", !H5FATAL);
+ }
+ }
+
+ h5_fixname_no_suffix(FILENAME[0], acc_tpl, filename, sizeof filename);
+
+ /* create the parallel file */
+ fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, acc_tpl);
+ VRFY((fid >= 0), "H5Fcreate succeeded", H5FATAL);
+
+ /* define a contiquous dataset of opt_iter*nprocs*opt_block chars */
+ dims[0] = opt_iter * nprocs * opt_block;
+ sid = H5Screate_simple(RANK, dims, NULL);
+ VRFY((sid >= 0), "H5Screate_simple succeeded", H5FATAL);
+ dataset = H5Dcreate2(fid, "Dataset1", H5T_NATIVE_CHAR, sid,
+ H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT);
+ VRFY((dataset >= 0), "H5Dcreate2 succeeded", H5FATAL);
+
+ /* create the memory dataspace and the file dataspace */
+ dims[0] = opt_block;
+ mem_dataspace = H5Screate_simple(RANK, dims, NULL);
+ VRFY((mem_dataspace >= 0), "", H5FATAL);
+ file_dataspace = H5Dget_space(dataset);
+ VRFY((file_dataspace >= 0), "H5Dget_space succeeded", H5FATAL);
+
+ /* now each process writes a block of opt_block chars in round robbin
+ * fashion until the whole dataset is covered.
+ */
+ for(j=0; j < opt_iter; j++) {
+ /* setup a file dataspace selection */
+ start[0] = (j*iter_jump)+(mynod*opt_block);
+ stride[0] = block[0] = opt_block;
+ count[0]= 1;
+ ret=H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block);
+ VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL);
+
+ if (opt_correct) /* fill in buffer for iteration */ {
+ for (i=mynod+j, check=buf; i<opt_block; i++,check++) *check=(char)i;
+ }
+
+ /* discover the starting time of the operation */
+ MPI_Barrier(MPI_COMM_WORLD);
+ stim = MPI_Wtime();
+
+ /* write data */
+ ret = H5Dwrite(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace,
+ H5P_DEFAULT, buf);
+ VRFY((ret >= 0), "H5Dwrite dataset1 succeeded", !H5FATAL);
+
+ /* discover the ending time of the operation */
+ etim = MPI_Wtime();
+
+ write_tim += (etim - stim);
+
+ /* we are done with this "write" iteration */
+ }
+
+ /* close dataset and file */
+ ret=H5Dclose(dataset);
+ VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL);
+ ret=H5Fclose(fid);
+ VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL);
+
+
+
+ /* wait for everyone to synchronize at this point */
+ MPI_Barrier(MPI_COMM_WORLD);
+
+ /* reopen the file for reading */
+ fid=H5Fopen(filename,H5F_ACC_RDONLY,acc_tpl);
+ VRFY((fid >= 0), "", H5FATAL);
+
+ /* open the dataset */
+ dataset = H5Dopen2(fid, "Dataset1", H5P_DEFAULT);
+ VRFY((dataset >= 0), "H5Dopen succeeded", H5FATAL);
+
+ /* we can re-use the same mem_dataspace and file_dataspace
+ * the H5Dwrite used since the dimension size is the same.
+ */
+
+ /* we are going to repeat the read the same pattern the write used */
+ for (j=0; j < opt_iter; j++) {
+ /* setup a file dataspace selection */
+ start[0] = (j*iter_jump)+(mynod*opt_block);
+ stride[0] = block[0] = opt_block;
+ count[0]= 1;
+ ret=H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block);
+ VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL);
+ /* seek to the appropriate spot give the current iteration and
+ * rank within the MPI processes */
+
+ /* discover the start time */
+ MPI_Barrier(MPI_COMM_WORLD);
+ stim = MPI_Wtime();
+
+ /* read in the file data */
+ if (!opt_correct){
+ ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, H5P_DEFAULT, buf);
+ }
+ else{
+ ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, H5P_DEFAULT, buf2);
+ }
+ myerrno = errno;
+
+ /* discover the end time */
+ etim = MPI_Wtime();
+ read_tim += (etim - stim);
+ VRFY((ret >= 0), "H5Dwrite dataset1 succeeded", !H5FATAL);
+
+
+ if (ret < 0) fprintf(stderr, "node %d, read error, loc = %Ld: %s\n",
+ mynod, mynod*opt_block, strerror(myerrno));
+
+ /* if the user wanted to check correctness, compare the write
+ * buffer to the read buffer */
+ if (opt_correct && memcmp(buf, buf2, opt_block)) {
+ fprintf(stderr, "node %d, correctness test failed\n", mynod);
+ my_correct = 0;
+ MPI_Allreduce(&my_correct, &correct, 1, MPI_INT, MPI_MIN,
+ MPI_COMM_WORLD);
+ }
+
+ /* we are done with this read iteration */
+ }
+
+ /* close dataset and file */
+ ret=H5Dclose(dataset);
+ VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL);
+ ret=H5Fclose(fid);
+ VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL);
+ ret=H5Pclose(acc_tpl);
+ VRFY((ret >= 0), "H5Pclose succeeded", H5FATAL);
+
+ /* compute the read and write times */
+ MPI_Allreduce(&read_tim, &max_read_tim, 1, MPI_DOUBLE, MPI_MAX,
+ MPI_COMM_WORLD);
+ MPI_Allreduce(&read_tim, &min_read_tim, 1, MPI_DOUBLE, MPI_MIN,
+ MPI_COMM_WORLD);
+ MPI_Allreduce(&read_tim, &ave_read_tim, 1, MPI_DOUBLE, MPI_SUM,
+ MPI_COMM_WORLD);
+
+ /* calculate the average from the sum */
+ ave_read_tim = ave_read_tim / nprocs;
+
+ MPI_Allreduce(&write_tim, &max_write_tim, 1, MPI_DOUBLE, MPI_MAX,
+ MPI_COMM_WORLD);
+ MPI_Allreduce(&write_tim, &min_write_tim, 1, MPI_DOUBLE, MPI_MIN,
+ MPI_COMM_WORLD);
+ MPI_Allreduce(&write_tim, &ave_write_tim, 1, MPI_DOUBLE, MPI_SUM,
+ MPI_COMM_WORLD);
+
+ /* calculate the average from the sum */
+ ave_write_tim = ave_write_tim / nprocs;
+
+ /* print out the results on one node */
+ if (mynod == 0) {
+ read_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_read_tim*1000000.0);
+ write_bw = ((int64_t)(opt_block*nprocs*opt_iter))/(max_write_tim*1000000.0);
+
+ printf("nr_procs = %d, nr_iter = %d, blk_sz = %ld\n", nprocs,
+ opt_iter, (long)opt_block);
+
+ printf("# total_size = %ld\n", (long)(opt_block*nprocs*opt_iter));
+
+ printf("# Write: min_time = %f, max_time = %f, mean_time = %f\n",
+ min_write_tim, max_write_tim, ave_write_tim);
+ printf("# Read: min_time = %f, max_time = %f, mean_time = %f\n",
+ min_read_tim, max_read_tim, ave_read_tim);
+
+ printf("Write bandwidth = %f Mbytes/sec\n", write_bw);
+ printf("Read bandwidth = %f Mbytes/sec\n", read_bw);
+
+ if (opt_correct) {
+ printf("Correctness test %s.\n", correct ? "passed" : "failed");
+ }
+ }
+
+
+die_jar_jar_die:
+
+#if H5_HAVE_SETENV
+/* no setenv or unsetenv */
+ /* clear the environment variable if it was set earlier */
+ if (opt_pvfstab_set){
+ unsetenv("PVFSTAB_FILE");
+ }
+#endif
+
+ free(tmp);
+ if (opt_correct) free(tmp2);
+
+ MPI_Finalize();
+
+ return(0);
+}
+
+static int
+parse_args(int argc, char **argv)
+{
+ int c;
+
+ while ((c = getopt(argc, argv, "s:b:i:f:p:a:2:c")) != EOF) {
+ switch (c) {
+ case 's': /* stripe */
+ opt_stripe = atoi(optarg);
+ break;
+ case 'b': /* block size */
+ opt_block = atoi(optarg);
+ break;
+ case 'i': /* iterations */
+ opt_iter = atoi(optarg);
+ break;
+ case 'f': /* filename */
+ strncpy(opt_file, optarg, 255);
+ FILENAME[0] = opt_file;
+ break;
+ case 'p': /* pvfstab file */
+ strncpy(opt_pvfstab, optarg, 255);
+ opt_pvfstab_set = 1;
+ break;
+ case 'a': /* aligned allocation.
+ * syntax: -a<alignment>/<threshold>
+ * e.g., -a4096/512 allocate at 4096 bytes
+ * boundary if request size >= 512.
+ */
+ {char *p;
+ opt_alignment = atoi(optarg);
+ if (p=(char*)strchr(optarg, '/'))
+ opt_threshold = atoi(p+1);
+ }
+ HDfprintf(stdout,
+ "alignment/threshold=%Hu/%Hu\n",
+ opt_alignment, opt_threshold);
+ break;
+ case '2': /* use 2-files, i.e., split file driver */
+ opt_split_vfd=1;
+ /* get meta and raw file extension. */
+ /* syntax is <raw_ext>,<meta_ext> */
+ meta_ext = raw_ext = optarg;
+ while (*raw_ext != '\0'){
+ if (*raw_ext == ','){
+ *raw_ext = '\0';
+ raw_ext++;
+ break;
+ }
+ raw_ext++;
+ }
+ printf("split-file-vfd used: %s,%s\n",
+ meta_ext, raw_ext);
+ break;
+ case 'c': /* correctness */
+ opt_correct = 1;
+ break;
+ case '?': /* unknown */
+ default:
+ break;
+ }
+ }
+
+ return(0);
+}
+
+/*
+ * Local variables:
+ * c-indent-level: 3
+ * c-basic-offset: 3
+ * tab-width: 3
+ * End:
+ */
+
+#else /* H5_HAVE_PARALLEL */
+/* dummy program since H5_HAVE_PARALLEL is not configured in */
+int
+main(int UNUSED argc, char UNUSED **argv)
+{
+ printf("No parallel performance because parallel is not configured in\n");
+ return(0);
+}
+#endif /* H5_HAVE_PARALLEL */
+