summaryrefslogtreecommitdiffstats
path: root/tools/test/h5copy/CMakeTests.cmake
diff options
context:
space:
mode:
Diffstat (limited to 'tools/test/h5copy/CMakeTests.cmake')
-rw-r--r--tools/test/h5copy/CMakeTests.cmake194
1 files changed, 83 insertions, 111 deletions
diff --git a/tools/test/h5copy/CMakeTests.cmake b/tools/test/h5copy/CMakeTests.cmake
index 154ca15..33af1cd 100644
--- a/tools/test/h5copy/CMakeTests.cmake
+++ b/tools/test/h5copy/CMakeTests.cmake
@@ -55,25 +55,17 @@
# Perform h5copy according to passing parameters
#
macro (ADD_H5_F_TEST testname resultcode infile fparam vparam sparam srcname dparam dstname)
- if (NOT HDF5_ENABLE_USING_MEMCHECKER)
- # Remove any output file left over from previous test run
- add_test (
- NAME H5COPY_F-${testname}-clear-objects
- COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
- )
- endif ()
+ # Remove any output file left over from previous test run
+ add_test (
+ NAME H5COPY_F-${testname}-clear-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
add_test (
NAME H5COPY_F-${testname}
COMMAND ${CMAKE_CROSSCOMPILING_EMULATOR} $<TARGET_FILE:h5copy${tgt_file_ext}> -f ${fparam} -i ./testfiles/${infile} -o ./testfiles/${testname}.out.h5 ${vparam} ${sparam} ${srcname} ${dparam} ${dstname} ${ARGN}
)
- if (HDF5_ENABLE_USING_MEMCHECKER)
- if (last_test)
- set_tests_properties (H5COPY_F-${testname} PROPERTIES DEPENDS ${last_test})
- endif ()
- else ()
- set_tests_properties (H5COPY_F-${testname} PROPERTIES DEPENDS H5COPY_F-${testname}-clear-objects)
- endif ()
+ set_tests_properties (H5COPY_F-${testname} PROPERTIES DEPENDS H5COPY_F-${testname}-clear-objects)
# resultcode=2 will cause the test to skip the diff test
if (NOT "${resultcode}" STREQUAL "2")
@@ -86,28 +78,29 @@
set_tests_properties (H5COPY_F-${testname}-DIFF PROPERTIES WILL_FAIL "true")
endif ()
endif ()
+ add_test (
+ NAME H5COPY_F-${testname}-clean-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
+ if (NOT "${resultcode}" STREQUAL "2")
+ set_tests_properties (H5COPY_F-${testname}-clean-objects PROPERTIES DEPENDS H5COPY_F-${testname}-DIFF)
+ else ()
+ set_tests_properties (H5COPY_F-${testname}-clean-objects PROPERTIES DEPENDS H5COPY_F-${testname})
+ endif ()
endmacro ()
macro (ADD_H5_TEST testname resultcode infile vparam sparam srcname dparam dstname)
- if (NOT HDF5_ENABLE_USING_MEMCHECKER)
- # Remove any output file left over from previous test run
- add_test (
- NAME H5COPY-${testname}-clear-objects
- COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
- )
- endif ()
+ # Remove any output file left over from previous test run
+ add_test (
+ NAME H5COPY-${testname}-clear-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
add_test (
NAME H5COPY-${testname}
COMMAND ${CMAKE_CROSSCOMPILING_EMULATOR} $<TARGET_FILE:h5copy${tgt_file_ext}> -i ./testfiles/${infile} -o ./testfiles/${testname}.out.h5 ${vparam} ${sparam} ${srcname} ${dparam} ${dstname} ${ARGN}
)
- if (HDF5_ENABLE_USING_MEMCHECKER)
- if (last_test)
- set_tests_properties (H5COPY-${testname} PROPERTIES DEPENDS ${last_test})
- endif ()
- else ()
- set_tests_properties (H5COPY-${testname} PROPERTIES DEPENDS H5COPY-${testname}-clear-objects)
- endif ()
+ set_tests_properties (H5COPY-${testname} PROPERTIES DEPENDS H5COPY-${testname}-clear-objects)
# resultcode=2 will cause the test to skip the diff test
if (NOT "${resultcode}" STREQUAL "2")
@@ -120,6 +113,15 @@
set_tests_properties (H5COPY-${testname}-DIFF PROPERTIES WILL_FAIL "true")
endif ()
endif ()
+ add_test (
+ NAME H5COPY-${testname}-clean-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
+ if (NOT "${resultcode}" STREQUAL "2")
+ set_tests_properties (H5COPY-${testname}-clean-objects PROPERTIES DEPENDS H5COPY-${testname}-DIFF)
+ else ()
+ set_tests_properties (H5COPY-${testname}-clean-objects PROPERTIES DEPENDS H5COPY-${testname})
+ endif ()
endmacro ()
macro (ADD_SKIP_H5_TEST testname skipresultfile)
@@ -133,25 +135,17 @@
endmacro ()
macro (ADD_H5_TEST2 testname resultcode infile psparam pdparam vparam sparam srcname dparam dstname)
- if (NOT HDF5_ENABLE_USING_MEMCHECKER)
- # Remove any output file left over from previous test run
- add_test (
- NAME H5COPY-${testname}-clear-objects
- COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
- )
- endif ()
+ # Remove any output file left over from previous test run
+ add_test (
+ NAME H5COPY-${testname}-clear-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
add_test (
NAME H5COPY-${testname}-prefill
COMMAND ${CMAKE_CROSSCOMPILING_EMULATOR} $<TARGET_FILE:h5copy${tgt_file_ext}> -i ./testfiles/${infile} -o ./testfiles/${testname}.out.h5 -v -s ${psparam} -d ${pdparam}
)
- if (HDF5_ENABLE_USING_MEMCHECKER)
- if (last_test)
- set_tests_properties (H5COPY-${testname}-prefill PROPERTIES DEPENDS ${last_test})
- endif ()
- else ()
- set_tests_properties (H5COPY-${testname}-prefill PROPERTIES DEPENDS H5COPY-${testname}-clear-objects)
- endif ()
+ set_tests_properties (H5COPY-${testname}-prefill PROPERTIES DEPENDS H5COPY-${testname}-clear-objects)
add_test (
NAME H5COPY-${testname}
@@ -169,28 +163,29 @@
set_tests_properties (H5COPY-${testname}-DIFF PROPERTIES WILL_FAIL "true")
endif ()
endif ()
+ add_test (
+ NAME H5COPY-${testname}-clean-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
+ if (NOT "${resultcode}" STREQUAL "2")
+ set_tests_properties (H5COPY-${testname}-clean-objects PROPERTIES DEPENDS H5COPY-${testname}-DIFF)
+ else ()
+ set_tests_properties (H5COPY-${testname}-clean-objects PROPERTIES DEPENDS H5COPY-${testname})
+ endif ()
endmacro ()
macro (ADD_H5_TEST_SAME testname resultcode pfile psparam pdparam vparam sparam srcname dparam dstname)
- if (NOT HDF5_ENABLE_USING_MEMCHECKER)
- # Remove any output file left over from previous test run
- add_test (
- NAME H5COPY_SAME-${testname}-clear-objects
- COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
- )
- endif ()
+ # Remove any output file left over from previous test run
+ add_test (
+ NAME H5COPY_SAME-${testname}-clear-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
add_test (
NAME H5COPY_SAME-${testname}-prefill
COMMAND ${CMAKE_CROSSCOMPILING_EMULATOR} $<TARGET_FILE:h5copy${tgt_file_ext}> -i ./testfiles/${pfile} -o ./testfiles/${testname}.out.h5 -v -s ${psparam} -d ${pdparam}
)
- if (HDF5_ENABLE_USING_MEMCHECKER)
- if (last_test)
- set_tests_properties (H5COPY_SAME-${testname}-prefill PROPERTIES DEPENDS ${last_test})
- endif ()
- else (HDF5_ENABLE_USING_MEMCHECKER)
- set_tests_properties (H5COPY_SAME-${testname}-prefill PROPERTIES DEPENDS H5COPY_SAME-${testname}-clear-objects)
- endif ()
+ set_tests_properties (H5COPY_SAME-${testname}-prefill PROPERTIES DEPENDS H5COPY_SAME-${testname}-clear-objects)
add_test (
NAME H5COPY_SAME-${testname}
@@ -208,6 +203,15 @@
set_tests_properties (H5COPY_SAME-${testname}-DIFF PROPERTIES WILL_FAIL "true")
endif ()
endif ()
+ add_test (
+ NAME H5COPY_SAME-${testname}-clean-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
+ if (NOT "${resultcode}" STREQUAL "2")
+ set_tests_properties (H5COPY_SAME-${testname}-clean-objects PROPERTIES DEPENDS H5COPY_SAME-${testname}-DIFF)
+ else ()
+ set_tests_properties (H5COPY_SAME-${testname}-clean-objects PROPERTIES DEPENDS H5COPY_SAME-${testname})
+ endif ()
endmacro ()
#
@@ -215,21 +219,19 @@
# files instead of checking with h5ls.
#
macro (ADD_H5_CMP_TEST testname resultcode infile vparam sparam srcname dparam dstname)
+ # Remove any output file left over from previous test run
+ add_test (
+ NAME H5COPY-CMP-${testname}-clear-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
# If using memchecker add tests without using scripts
if (HDF5_ENABLE_USING_MEMCHECKER)
add_test (NAME H5COPY-CMP-${testname} COMMAND ${CMAKE_CROSSCOMPILING_EMULATOR} $<TARGET_FILE:h5copy${tgt_file_ext}> -i ./testfiles/${infile} -o ./testfiles/${testname}.out.h5 ${vparam} ${sparam} ${srcname} ${dparam} ${dstname} ${ARGN})
if ("${resultcode}" STREQUAL "1")
set_tests_properties (H5COPY-CMP-${testname} PROPERTIES WILL_FAIL "true")
endif ()
- if (last_test)
- set_tests_properties (H5COPY-CMP-${testname} PROPERTIES DEPENDS ${last_test})
- endif ()
+ set_tests_properties (H5COPY-CMP-${testname} PROPERTIES DEPENDS H5COPY-CMP-${testname}-clear-objects)
else ()
- # Remove any output file left over from previous test run
- add_test (
- NAME H5COPY-CMP-${testname}-clear-objects
- COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
- )
add_test (
NAME H5COPY-CMP-${testname}
COMMAND "${CMAKE_COMMAND}"
@@ -246,6 +248,11 @@
)
set_tests_properties (H5COPY-CMP-${testname} PROPERTIES DEPENDS H5COPY-CMP-${testname}-clear-objects)
endif ()
+ add_test (
+ NAME H5COPY-CMP-${testname}-clean-objects
+ COMMAND ${CMAKE_COMMAND} -E remove ./testfiles/${testname}.out.h5
+ )
+ set_tests_properties (H5COPY-CMP-${testname}-clean-objects PROPERTIES DEPENDS H5COPY-CMP-${testname})
endmacro ()
macro (ADD_H5_UD_TEST testname resultcode infile sparam srcname dparam dstname cmpfile)
@@ -308,6 +315,11 @@
-P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
)
set_tests_properties (H5COPY_UD-${testname}-DIFF PROPERTIES DEPENDS H5COPY_UD-${testname})
+ add_test (
+ NAME H5COPY_UD-${testname}-clean-objects
+ COMMAND ${CMAKE_COMMAND} -E remove testfiles/${testname}.out.h5
+ )
+ set_tests_properties (H5COPY_UD-${testname}-clean-objects PROPERTIES DEPENDS H5COPY_UD-${testname}-DIFF)
endif ()
endmacro ()
@@ -315,7 +327,7 @@
if (NOT HDF5_ENABLE_USING_MEMCHECKER)
# Remove any output file left over from previous test run
add_test (
- NAME H5COPY_UD_ERR-${testname}-clearall-objects
+ NAME H5COPY_UD_ERR-${testname}-clear-objects
COMMAND ${CMAKE_COMMAND} -E remove testfiles/${testname}_ERR.out.h5
)
if ("${resultcode}" STREQUAL "2")
@@ -355,7 +367,7 @@
-P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
)
endif ()
- set_tests_properties (H5COPY_UD_ERR-${testname} PROPERTIES DEPENDS H5COPY_UD_ERR-${testname}-clearall-objects)
+ set_tests_properties (H5COPY_UD_ERR-${testname} PROPERTIES DEPENDS H5COPY_UD_ERR-${testname}-clear-objects)
add_test (
NAME H5COPY_UD_ERR-${testname}-DIFF
COMMAND "${CMAKE_COMMAND}"
@@ -373,6 +385,11 @@
-P "${HDF_RESOURCES_EXT_DIR}/runTest.cmake"
)
set_tests_properties (H5COPY_UD_ERR-${testname}-DIFF PROPERTIES DEPENDS H5COPY_UD_ERR-${testname})
+ add_test (
+ NAME H5COPY_UD_ERR-${testname}-clean-objects
+ COMMAND ${CMAKE_COMMAND} -E remove testfiles/${testname}_ERR.out.h5
+ )
+ set_tests_properties (H5COPY_UD_ERR-${testname}-clean-objects PROPERTIES DEPENDS H5COPY_UD_ERR-${testname}-DIFF)
endif ()
endmacro ()
@@ -390,51 +407,6 @@
set (HDF_EXT_SRC_FILE h5copy_extlinks_src)
set (HDF_EXT_TRG_FILE h5copy_extlinks_trg)
- if (HDF5_ENABLE_USING_MEMCHECKER)
- # Remove any output file left over from previous test run
- add_test (
- NAME H5COPY-clearall-objects
- COMMAND ${CMAKE_COMMAND} -E remove
- simple.out.h5
- chunk.out.h5
- compact.out.h5
- compound.out.h5
- compressed.out.h5
- named_vl.out.h5
- nested_vl.out.h5
- simple_top.out.h5
- dsrename.out.h5
- grp_empty.out.h5
- grp_dsets.out.h5
- grp_nested.out.h5
- simple_group.out.h5
- grp_rename.out.h5
- grp_dsets_rename.out.h5
- A_B1_simple.out.h5
- A_B2_simple2.out.h5
- C_D_simple.out.h5
- E_F_grp_dsets.out.h5
- G_H_grp_nested.out.h5
- region_ref.out.h5
- ext_link.out.h5
- ext_link_f.out.h5
- ext_dangle_noobj.out.h5
- ext_dangle_noobj_f.out.h5
- ext_dangle_nofile.out.h5
- ext_dangle_nofile_f.out.h5
- ext_link_group.out.h5
- ext_link_group_f.out.h5
- samefile1.out.h5
- samefile2.out.h5
- h5copy_misc1.out.h5
- )
- set_tests_properties (H5COPY-clearall-objects PROPERTIES WORKING_DIRECTORY "${PROJECT_BINARY_DIR}/testfiles")
- if (last_test)
- set_tests_properties (H5COPY-clearall-objects PROPERTIES DEPENDS ${last_test})
- endif ()
- set (last_test "H5COPY-clearall-objects")
- endif ()
-
# See which filters are usable (and skip tests for filters we
# don't have). Do this by searching H5pubconf.h to see which
# filters are defined.