diff options
Diffstat (limited to 'tools/test/h5dump/expected/pbits/tpbitsIncomplete.ddl')
| -rw-r--r-- | tools/test/h5dump/expected/pbits/tpbitsIncomplete.ddl | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/tools/test/h5dump/expected/pbits/tpbitsIncomplete.ddl b/tools/test/h5dump/expected/pbits/tpbitsIncomplete.ddl new file mode 100644 index 0000000..9274600 --- /dev/null +++ b/tools/test/h5dump/expected/pbits/tpbitsIncomplete.ddl @@ -0,0 +1,164 @@ +usage: h5dump [OPTIONS] files + OPTIONS + -h, --help Print a usage message and exit + -V, --version Print version number and exit +--------------- Error Options --------------- + --enable-error-stack Prints messages from the HDF5 error stack as they occur. + Optional value 2 also prints file open errors. + Default setting disables any error reporting. +--------------- File Options --------------- + -n, --contents Print a list of the file contents and exit + Optional value 1 also prints attributes. + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -f D, --filedriver=D Specify which driver to open the file with + -o F, --output=F Output raw data into file F + -b B, --binary=B Binary file output, of form B + -O F, --ddl=F Output ddl text into file F + Use blank(empty) filename F to suppress ddl display + --s3-cred=<cred> Supply S3 authentication information to "ros3" vfd. + <cred> :: "(<aws-region>,<access-id>,<access-key>)" + If absent or <cred> -> "(,,)", no authentication. + Has no effect if filedriver is not "ros3". + --hdfs-attrs=<attrs> Supply configuration information for HDFS file access. + For use with "--filedriver=hdfs" + <attrs> :: (<namenode name>,<namenode port>, + <kerberos cache path>,<username>, + <buffer size>) + Any absent attribute will use a default value. + --vol-value Value (ID) of the VOL connector to use for opening the + HDF5 file specified + --vol-name Name of the VOL connector to use for opening the + HDF5 file specified + --vol-info VOL-specific info to pass to the VOL connector used for + opening the HDF5 file specified + If none of the above options are used to specify a VOL, then + the VOL named by HDF5_VOL_CONNECTOR (or the native VOL connector, + if that environment variable is unset) will be used + --vfd-value Value (ID) of the VFL driver to use for opening the + HDF5 file specified + --vfd-name Name of the VFL driver to use for opening the + HDF5 file specified + --vfd-info VFD-specific info to pass to the VFL driver used for + opening the HDF5 file specified +--------------- Object Options --------------- + -a P, --attribute=P Print the specified attribute + If an attribute name contains a slash (/), escape the + slash with a preceding backslash (\). + (See example section below.) + -d P, --dataset=P Print the specified dataset + -g P, --group=P Print the specified group and all members + -l P, --soft-link=P Print the value(s) of the specified soft link + -t P, --datatype=P Print the specified named datatype + -N P, --any_path=P Print any attribute, dataset, group, datatype, or link that matches P + P can be the absolute path or just a relative path. + -A, --onlyattr Print the header and value of attributes + Optional value 0 suppresses printing attributes. + --vds-view-first-missing Set the VDS bounds to first missing mapped elements. + --vds-gap-size=N Set the missing file gap size, N=non-negative integers +--------------- Object Property Options --------------- + -i, --object-ids Print the object ids + -p, --properties Print dataset filters, storage layout and fill value + -M L, --packedbits=L Print packed bits as unsigned integers, using mask + format L for an integer dataset specified with + option -d. L is a list of offset,length values, + separated by commas. Offset is the beginning bit in + the data value and length is the number of bits of + the mask. + -R, --region Print dataset pointed by region references +--------------- Formatting Options --------------- + -e, --escape Escape non printing characters + -r, --string Print 1-byte integer datasets as ASCII + -y, --noindex Do not print array indices with the data + -m T, --format=T Set the floating point output format + -q Q, --sort_by=Q Sort groups and attributes by index Q + -z Z, --sort_order=Z Sort groups and attributes by order Z + --no-compact-subset Disable compact form of subsetting and allow the use + of "[" in dataset names. + -w N, --width=N Set the number of columns of output. A value of 0 (zero) + sets the number of columns to the maximum (65535). + Default width is 80 columns. +--------------- XML Options --------------- + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD + -D U, --xml-dtd=U Use the DTD or schema at U + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + ":": no namespace, default: "hdf5:" + E.g., to dump a file called "-f", use h5dump -- -f + +--------------- Subsetting Options --------------- + Subsetting is available by using the following options with a dataset + option. Subsetting is done by selecting a hyperslab from the data. + Thus, the options mirror those for performing a hyperslab selection. + One of the START, COUNT, STRIDE, or BLOCK parameters are mandatory if you do subsetting. + The STRIDE, COUNT, and BLOCK parameters are optional and will default to 1 in + each dimension. START is optional and will default to 0 in each dimension. + + -s START, --start=START Offset of start of subsetting selection + -S STRIDE, --stride=STRIDE Hyperslab stride + -c COUNT, --count=COUNT Number of blocks to include in selection + -k BLOCK, --block=BLOCK Size of block in hyperslab + START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) + +--------------- Option Argument Conventions --------------- + D - is the file driver to use in opening the file. Acceptable values + are "sec2", "family", "split", "multi", "direct", and "stream". Without + the file driver flag, the file will be opened with each driver in + turn and in the order specified above until one driver succeeds + in opening the file. + See examples below for family, split, and multi driver special file name usage. + + F - is a filename. + P - is the full path from the root group to the object. + N - is an integer greater than 1. + T - is a string containing the floating point format, e.g '%.3f' + U - is a URI reference (as defined in [IETF RFC 2396], + updated by [IETF RFC 2732]) + B - is the form of binary output: NATIVE for a memory type, FILE for the + file type, LE or BE for pre-existing little or big endian types. + Must be used with -o (output file) and it is recommended that + -d (dataset) is used. B is an optional argument, defaults to NATIVE + Q - is the sort index type. It can be "creation_order" or "name" (default) + Z - is the sort order type. It can be "descending" or "ascending" (default) + +--------------- Examples --------------- + + 1) Attribute foo of the group /bar_none in file quux.h5 + + h5dump -a /bar_none/foo quux.h5 + + Attribute "high/low" of the group /bar_none in the file quux.h5 + + h5dump -a "/bar_none/high\/low" quux.h5 + + 2) Selecting a subset from dataset /foo in file quux.h5 + + h5dump -d /foo -s "0,1" -S "1,1" -c "2,3" -k "2,2" quux.h5 + + 3) Saving dataset 'dset' in file quux.h5 to binary file 'out.bin' + using a little-endian type + + h5dump -d /dset -b LE -o out.bin quux.h5 + + 4) Display two packed bits (bits 0-1 and bits 4-6) in the dataset /dset + + h5dump -d /dset -M 0,1,4,3 quux.h5 + + 5) Dataset foo in files file1.h5 file2.h5 file3.h5 + + h5dump -d /foo file1.h5 file2.h5 file3.h5 + + 6) Dataset foo in split files splitfile-m.h5 splitfile-r.h5 + + h5dump -d /foo -f split splitfile + + 7) Dataset foo in multi files mf-s.h5, mf-b.h5, mf-r.h5, mf-g.h5, mf-l.h5 and mf-o.h5 + + h5dump -d /foo -f multi mf + + 8) Dataset foo in family files fam00000.h5 fam00001.h5 and fam00002.h5 + + h5dump -d /foo -f family fam%05d.h5 + |