summaryrefslogtreecommitdiffstats
path: root/tools/test/h5dump/testh5dumpvds.sh.in
diff options
context:
space:
mode:
Diffstat (limited to 'tools/test/h5dump/testh5dumpvds.sh.in')
-rw-r--r--tools/test/h5dump/testh5dumpvds.sh.in523
1 files changed, 523 insertions, 0 deletions
diff --git a/tools/test/h5dump/testh5dumpvds.sh.in b/tools/test/h5dump/testh5dumpvds.sh.in
new file mode 100644
index 0000000..459d506
--- /dev/null
+++ b/tools/test/h5dump/testh5dumpvds.sh.in
@@ -0,0 +1,523 @@
+#! /bin/sh
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5. The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html. COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page. It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# Tests for the h5dump tool with vds type files
+
+srcdir=@srcdir@
+
+# Determine which filters are available
+USE_FILTER_SZIP="@USE_FILTER_SZIP@"
+USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@"
+
+TESTNAME=h5dump
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+DUMPER=../../src/h5dump/h5dump # The tool name
+DUMPER_BIN=`pwd`/$DUMPER # The path of the tool binary
+
+H5DIFF=../../src/h5diff/h5diff # The h5diff tool name
+H5DIFF_BIN=`pwd`/$H5DIFF # The path of the h5diff tool binary
+
+H5IMPORT=../../src/h5import/h5import # The h5import tool name
+H5IMPORT_BIN=`pwd`/$H5IMPORT # The path of the h5import tool binary
+
+RM='rm -rf'
+CMP='cmp -s'
+DIFF='diff -c'
+CP='cp'
+DIRNAME='dirname'
+LS='ls'
+AWK='awk'
+
+nerrors=0
+verbose=yes
+
+# source dirs
+SRC_TOOLS="$srcdir/../.."
+
+SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles"
+# testfiles source dirs for tools
+SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES"
+SRC_H5DUMP_ERRORFILES="$srcdir/errfiles"
+SRC_H5DIFF_TESTFILES="$SRC_TOOLS/test/h5diff/testfiles"
+SRC_H5COPY_TESTFILES="$SRC_TOOLS/test/h5copy/testfiles"
+SRC_H5REPACK_TESTFILES="$SRC_TOOLS/test/h5repack/testfiles"
+SRC_H5JAM_TESTFILES="$SRC_TOOLS/test/h5jam/testfiles"
+SRC_H5STAT_TESTFILES="$SRC_TOOLS/test/h5stat/testfiles"
+SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/test/h5import/testfiles"
+
+TEST_P_DIR=./testfiles
+TESTDIR=./testfiles/vds
+test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR
+test -d $TESTDIR || mkdir -p $TESTDIR
+
+######################################################################
+# test files
+# --------------------------------------------------------------------
+# All the test files copy from source directory to test directory
+# NOTE: Keep this framework to add/remove test files.
+# Any test files from other tools can be used in this framework.
+# This list are also used for checking exist.
+# Comment '#' without space can be used.
+# --------------------------------------------------------------------
+LIST_HDF5_TEST_FILES="
+$SRC_H5DUMP_TESTFILES/vds/1_a.h5
+$SRC_H5DUMP_TESTFILES/vds/1_b.h5
+$SRC_H5DUMP_TESTFILES/vds/1_c.h5
+$SRC_H5DUMP_TESTFILES/vds/1_d.h5
+$SRC_H5DUMP_TESTFILES/vds/1_e.h5
+$SRC_H5DUMP_TESTFILES/vds/1_f.h5
+$SRC_H5DUMP_TESTFILES/vds/1_vds.h5
+$SRC_H5DUMP_TESTFILES/vds/2_a.h5
+$SRC_H5DUMP_TESTFILES/vds/2_b.h5
+$SRC_H5DUMP_TESTFILES/vds/2_c.h5
+$SRC_H5DUMP_TESTFILES/vds/2_d.h5
+$SRC_H5DUMP_TESTFILES/vds/2_e.h5
+$SRC_H5DUMP_TESTFILES/vds/2_vds.h5
+$SRC_H5DUMP_TESTFILES/vds/3_1_vds.h5
+$SRC_H5DUMP_TESTFILES/vds/3_2_vds.h5
+$SRC_H5DUMP_TESTFILES/vds/4_0.h5
+$SRC_H5DUMP_TESTFILES/vds/4_1.h5
+$SRC_H5DUMP_TESTFILES/vds/4_2.h5
+$SRC_H5DUMP_TESTFILES/vds/4_vds.h5
+$SRC_H5DUMP_TESTFILES/vds/5_a.h5
+$SRC_H5DUMP_TESTFILES/vds/5_b.h5
+$SRC_H5DUMP_TESTFILES/vds/5_c.h5
+$SRC_H5DUMP_TESTFILES/vds/5_vds.h5
+$SRC_H5DUMP_TESTFILES/vds/a.h5
+$SRC_H5DUMP_TESTFILES/vds/b.h5
+$SRC_H5DUMP_TESTFILES/vds/c.h5
+$SRC_H5DUMP_TESTFILES/vds/d.h5
+$SRC_H5DUMP_TESTFILES/vds/vds-percival-unlim-maxmin.h5
+$SRC_H5DUMP_TESTFILES/vds/f-0.h5
+$SRC_H5DUMP_TESTFILES/vds/f-3.h5
+$SRC_H5DUMP_TESTFILES/vds/vds-eiger.h5
+"
+
+LIST_OTHER_TEST_FILES="
+$SRC_H5DUMP_TESTFILES/vds/tvds-1.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds-2.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds-3_1.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds-3_2.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds-4.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds-5.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds_layout-1.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds_layout-2.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds_layout-3_1.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds_layout-3_2.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds_layout-4.ddl
+$SRC_H5DUMP_TESTFILES/vds/tvds_layout-5.ddl
+$SRC_H5DUMP_TESTFILES/vds/vds-first.ddl
+$SRC_H5DUMP_TESTFILES/vds/vds-gap1.ddl
+$SRC_H5DUMP_TESTFILES/vds/vds-gap2.ddl
+$SRC_H5DUMP_TESTFILES/vds/vds_layout-eiger.ddl
+$SRC_H5DUMP_TESTFILES/vds/vds_layout-maxmin.ddl
+"
+
+LIST_ERROR_TEST_FILES="
+"
+
+#
+# copy test files and expected output files from source dirs to test dir
+#
+COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES $LIST_ERROR_TEST_FILES"
+
+COPY_TESTFILES_TO_TESTDIR()
+{
+ # copy test files. Used -f to make sure get a new copy
+ for tstfile in $COPY_TESTFILES
+ do
+ # ignore '#' comment
+ echo $tstfile | tr -d ' ' | grep '^#' > /dev/null
+ RET=$?
+ if [ $RET -eq 1 ]; then
+ # skip cp if srcdir is same as destdir
+ # this occurs when build/test performed in source dir and
+ # make cp fail
+ SDIR=`$DIRNAME $tstfile`
+ INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
+ INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
+ if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
+ $CP -f $tstfile $TESTDIR
+ if [ $? -ne 0 ]; then
+ echo "Error: FAILED to copy $tstfile ."
+
+ # Comment out this to CREATE expected file
+ exit $EXIT_FAILURE
+ fi
+ fi
+ fi
+ done
+}
+
+CLEAN_TESTFILES_AND_TESTDIR()
+{
+ # skip rm if srcdir is same as destdir
+ # this occurs when build/test performed in source dir and
+ # make cp fail
+ SDIR=$SRC_H5DUMP_TESTFILES/vds
+ INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'`
+ INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'`
+ if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then
+ $RM $TESTDIR
+ fi
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Testing".
+#
+TESTING() {
+ SPACES=" "
+ echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Source in the output filter function definitions.
+. $srcdir/../../../bin/output_filter.sh
+
+# Run a test and print PASS or *FAIL*. If a test fails then increment
+# the `nerrors' global variable and (if $verbose is set) display the
+# difference between the actual output and the expected output. The
+# expected output is given as the first argument to this function and
+# the actual output file is calculated by replacing the `.ddl' with
+# `.out'. The actual output is not removed if $HDF5_NOCLEANUP has a
+# non-zero value.
+#
+TOOLTEST() {
+ expect="$TESTDIR/$1"
+ actual="$TESTDIR/`basename $1 .ddl`.out"
+ actual_err="$TESTDIR/`basename $1 .ddl`.err"
+ actual_sav=${actual}-sav
+ actual_err_sav=${actual_err}-sav
+ shift
+
+ # Run test.
+ TESTING $DUMPER $@
+ (
+ cd $TESTDIR
+ $RUNSERIAL $DUMPER_BIN "$@"
+ ) >$actual 2>$actual_err
+
+ # save actual and actual_err in case they are needed later.
+ cp $actual $actual_sav
+ STDOUT_FILTER $actual
+ cp $actual_err $actual_err_sav
+ STDERR_FILTER $actual_err
+ cat $actual_err >> $actual
+
+ if [ ! -f $expect ]; then
+ # Create the expect file if it doesn't yet exist.
+ echo " CREATED"
+ cp $actual $expect
+ elif $CMP $expect $actual; then
+ echo " PASSED"
+ else
+ echo "*FAILED*"
+ echo " Expected result (*.ddl) differs from actual result (*.out)"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
+ fi
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actual $actual_err $actual_sav $actual_err_sav $actual_ext
+ fi
+
+}
+
+
+# same as TOOLTEST1 but compares generated file to expected output
+# and compares the generated data file to the expected data file
+# used for the binary tests that expect a full path in -o without -b
+TOOLTEST2() {
+
+ expectdata="$TESTDIR/$1"
+ expect="$TESTDIR/`basename $1 .exp`.ddl"
+ actualdata="$TESTDIR/`basename $1 .exp`.txt"
+ actual="$TESTDIR/`basename $1 .exp`.out"
+ actual_err="$TESTDIR/`basename $1 .exp`.err"
+ shift
+
+ # Run test.
+ TESTING $DUMPER $@
+ (
+ cd $TESTDIR
+ $RUNSERIAL $DUMPER_BIN "$@"
+ ) >$actual 2>$actual_err
+ cat $actual_err >> $actual
+
+ if [ ! -f $expect ]; then
+ # Create the expect file if it doesn't yet exist.
+ echo " CREATED"
+ cp $actual $expect
+ elif $CMP $expect $actual; then
+ if [ ! -f $expectdata ]; then
+ # Create the expect data file if it doesn't yet exist.
+ echo " CREATED"
+ cp $actualdata $expectdata
+ elif $CMP $expectdata $actualdata; then
+ echo " PASSED"
+ else
+ echo "*FAILED*"
+ echo " Expected datafile (*.exp) differs from actual datafile (*.txt)"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expectdata $actualdata |sed 's/^/ /'
+ fi
+ else
+ echo "*FAILED*"
+ echo " Expected result (*.ddl) differs from actual result (*.out)"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
+ fi
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actual $actualdata $actual_err
+ fi
+
+}
+
+# same as TOOLTEST but filters error stack outp
+# Extract file name, line number, version and thread IDs because they may be different
+TOOLTEST3() {
+
+ expect="$TESTDIR/$1"
+ actual="$TESTDIR/`basename $1 .ddl`.out"
+ actual_err="$TESTDIR/`basename $1 .ddl`.err"
+ actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
+ actual_sav=${actual}-sav
+ actual_err_sav=${actual_err}-sav
+ shift
+
+ # Run test.
+ TESTING $DUMPER $@
+ (
+ cd $TESTDIR
+ $RUNSERIAL $DUMPER_BIN "$@"
+ ) >$actual 2>$actual_err
+
+ # save actual and actual_err in case they are needed later.
+ cp $actual $actual_sav
+ STDOUT_FILTER $actual
+ cp $actual_err $actual_err_sav
+ STDERR_FILTER $actual_err
+
+ # Extract file name, line number, version and thread IDs because they may be different
+ sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
+ -e 's/line [0-9]*/line (number)/' \
+ -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
+ -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
+ -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
+ -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
+ $actual_err > $actual_ext
+ cat $actual_ext >> $actual
+
+ if [ ! -f $expect ]; then
+ # Create the expect file if it doesn't yet exist.
+ echo " CREATED"
+ cp $actual $expect
+ elif $CMP $expect $actual; then
+ echo " PASSED"
+ else
+ echo "*FAILED*"
+ echo " Expected result (*.ddl) differs from actual result (*.out)"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
+ fi
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actual $actual_err $actual_sav $actual_err_sav
+ fi
+
+}
+
+# same as TOOLTEST3 but filters error stack output and compares to an error file
+# Extract file name, line number, version and thread IDs because they may be different
+TOOLTEST4() {
+
+ expect="$TESTDIR/$1"
+ expect_err="$TESTDIR/`basename $1 .ddl`.err"
+ actual="$TESTDIR/`basename $1 .ddl`.out"
+ actual_err="$TESTDIR/`basename $1 .ddl`.oerr"
+ actual_ext="$TESTDIR/`basename $1 .ddl`.ext"
+ actual_sav=${actual}-sav
+ actual_err_sav=${actual_err}-sav
+ shift
+
+ # Run test.
+ TESTING $DUMPER $@
+ (
+ cd $TESTDIR
+ $RUNSERIAL $DUMPER_BIN "$@"
+ ) >$actual 2>$actual_err
+
+ # save actual and actual_err in case they are needed later.
+ cp $actual $actual_sav
+ STDOUT_FILTER $actual
+ cp $actual_err $actual_err_sav
+ STDERR_FILTER $actual_err
+
+ # Extract file name, line number, version and thread IDs because they may be different
+ sed -e 's/thread [0-9]*/thread (IDs)/' -e 's/: .*\.c /: (file name) /' \
+ -e 's/line [0-9]*/line (number)/' \
+ -e 's/v[1-9]*\.[0-9]*\./version (number)\./' \
+ -e 's/[1-9]*\.[0-9]*\.[0-9]*[^)]*/version (number)/' \
+ -e 's/H5Eget_auto[1-2]*/H5Eget_auto(1 or 2)/' \
+ -e 's/H5Eset_auto[1-2]*/H5Eset_auto(1 or 2)/' \
+ $actual_err > $actual_ext
+ #cat $actual_ext >> $actual
+
+ if [ ! -f $expect ]; then
+ # Create the expect file if it doesn't yet exist.
+ echo " CREATED"
+ cp $actual $expect
+ elif $CMP $expect $actual; then
+ if $CMP $expect_err $actual_ext; then
+ echo " PASSED"
+ else
+ echo "*FAILED*"
+ echo " Expected result (*.err) differs from actual result (*.oerr)"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect_err $actual_ext |sed 's/^/ /'
+ fi
+ else
+ echo "*FAILED*"
+ echo " Expected result (*.ddl) differs from actual result (*.out)"
+ nerrors="`expr $nerrors + 1`"
+ test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /'
+ fi
+
+ # Clean up output file
+ if test -z "$HDF5_NOCLEANUP"; then
+ rm -f $actual $actual_err $actual_sav $actual_err_sav
+ fi
+
+}
+
+# Print a "SKIP" message
+SKIP() {
+ TESTING $DUMPER $@
+ echo " -SKIP-"
+}
+
+# Print a line-line message left justified in a field of 70 characters
+#
+PRINT_H5DIFF() {
+ SPACES=" "
+ echo " Running h5diff $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+
+# Call the h5diff tool
+#
+DIFFTEST()
+{
+ PRINT_H5DIFF $@
+ (
+ cd $TESTDIR
+ $RUNSERIAL $H5DIFF_BIN "$@" -q
+ )
+ RET=$?
+ if [ $RET != 0 ] ; then
+ echo "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
+ else
+ echo " PASSED"
+ fi
+
+}
+
+# Print a line-line message left justified in a field of 70 characters
+# beginning with the word "Verifying".
+#
+PRINT_H5IMPORT() {
+ SPACES=" "
+ echo " Running h5import $* $SPACES" | cut -c1-70 | tr -d '\012'
+}
+
+# Call the h5import tool
+#
+IMPORTTEST()
+{
+ # remove the output hdf5 file if it exists
+ hdf5_file="$TESTDIR/$5"
+ if [ -f $hdf5_file ]; then
+ rm -f $hdf5_file
+ fi
+
+ PRINT_H5IMPORT $@
+ (
+ cd $TESTDIR
+ $RUNSERIAL $H5IMPORT_BIN "$@"
+ )
+ RET=$?
+ if [ $RET != 0 ] ; then
+ echo "*FAILED*"
+ nerrors="`expr $nerrors + 1`"
+ else
+ echo " PASSED"
+ fi
+
+}
+
+
+##############################################################################
+##############################################################################
+### T H E T E S T S ###
+##############################################################################
+##############################################################################
+# prepare for test
+COPY_TESTFILES_TO_TESTDIR
+
+####### test for dataset vds ######
+
+ # Data read
+if test $USE_FILTER_DEFLATE = "yes" ; then
+ TOOLTEST tvds-1.ddl --enable-error-stack 1_vds.h5
+ TOOLTEST tvds-2.ddl --enable-error-stack 2_vds.h5
+ TOOLTEST tvds-3_1.ddl --enable-error-stack 3_1_vds.h5
+ TOOLTEST tvds-3_2.ddl --enable-error-stack 3_2_vds.h5
+ TOOLTEST tvds-4.ddl --enable-error-stack 4_vds.h5
+ TOOLTEST tvds-5.ddl --enable-error-stack 5_vds.h5
+ TOOLTEST vds-first.ddl --vds-view-first-missing --enable-error-stack vds-percival-unlim-maxmin.h5
+ TOOLTEST vds-gap1.ddl -d /VDS-Eiger --vds-gap-size=1 --enable-error-stack vds-eiger.h5
+ TOOLTEST vds-gap2.ddl --vds-gap-size=2 --enable-error-stack vds-eiger.h5
+fi
+
+ # Layout read
+if test $USE_FILTER_DEFLATE = "yes" ; then
+ TOOLTEST tvds_layout-1.ddl -p --enable-error-stack 1_vds.h5
+ TOOLTEST tvds_layout-2.ddl -p --enable-error-stack 2_vds.h5
+ TOOLTEST tvds_layout-3_1.ddl -p --enable-error-stack 3_1_vds.h5
+ TOOLTEST tvds_layout-3_2.ddl -p --enable-error-stack 3_2_vds.h5
+ TOOLTEST tvds_layout-4.ddl -p --enable-error-stack 4_vds.h5
+ TOOLTEST tvds_layout-5.ddl -p --enable-error-stack 5_vds.h5
+ TOOLTEST vds_layout-eiger.ddl -p --enable-error-stack vds-eiger.h5
+ TOOLTEST vds_layout-maxmin.ddl -p --enable-error-stack vds-percival-unlim-maxmin.h5
+fi
+
+# Clean up temporary files/directories
+CLEAN_TESTFILES_AND_TESTDIR
+
+# Report test results and exit
+if test $nerrors -eq 0 ; then
+ echo "All $TESTNAME tests passed."
+ exit $EXIT_SUCCESS
+else
+ echo "$TESTNAME tests failed with $nerrors errors."
+ exit $EXIT_FAILURE
+fi
generated by cgit v0.12 at 2024-11-01 16:56:37 (GMT)