diff options
Diffstat (limited to 'tools/test/h5ls/testh5lsvds.sh.in')
-rw-r--r-- | tools/test/h5ls/testh5lsvds.sh.in | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/tools/test/h5ls/testh5lsvds.sh.in b/tools/test/h5ls/testh5lsvds.sh.in new file mode 100644 index 0000000..b5c6aac --- /dev/null +++ b/tools/test/h5ls/testh5lsvds.sh.in @@ -0,0 +1,258 @@ +#! /bin/sh +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# +# Tests for the h5ls tool + +srcdir=@srcdir@ + +TESTNAME=h5ls +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +H5LS=../../src/h5ls/h5ls # The tool name +H5LS_BIN=`pwd`/$H5LS # The path of the tool binary + +RM='rm -rf' +CMP='cmp -s' +DIFF='diff -c' +CP='cp' +NLINES=20 # Max. lines of output to display if test fails +DIRNAME='dirname' +LS='ls' +AWK='awk' + +WORDS_BIGENDIAN="@WORDS_BIGENDIAN@" + +nerrors=0 +verbose=yes +h5haveexitcode=yes # default is yes + +# source dirs +SRC_TOOLS="$srcdir/../.." +SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" + +# testfiles source dirs for tools +SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES" +SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES" +SRC_H5DIFF_TESTFILES="$SRC_TOOLS/test/h5diff/testfiles" +SRC_H5COPY_TESTFILES="$SRC_TOOLS/test/h5copy/testfiles" +SRC_H5REPACK_TESTFILES="$SRC_TOOLS/test/h5repack/testfiles" +SRC_H5JAM_TESTFILES="$SRC_TOOLS/test/h5jam/testfiles" +SRC_H5STAT_TESTFILES="$SRC_TOOLS/test/h5stat/testfiles" +SRC_H5IMPORT_TESTFILES="$SRC_TOOLS/test/h5import/testfiles" + +TEST_P_DIR=./testfiles +TESTDIR=./testfiles/vds +test -d $TEST_P_DIR || mkdir -p $TEST_P_DIR +test -d $TESTDIR || mkdir $TESTDIR + +###################################################################### +# test files +# -------------------------------------------------------------------- +# All the test files copy from source directory to test directory +# NOTE: Keep this framework to add/remove test files. +# Any test files from other tools can be used in this framework. +# This list are also used for checking exist. +# Comment '#' without space can be used. +# -------------------------------------------------------------------- +LIST_HDF5_TEST_FILES=" +$SRC_H5LS_TESTFILES/vds/1_a.h5 +$SRC_H5LS_TESTFILES/vds/1_b.h5 +$SRC_H5LS_TESTFILES/vds/1_c.h5 +$SRC_H5LS_TESTFILES/vds/1_d.h5 +$SRC_H5LS_TESTFILES/vds/1_e.h5 +$SRC_H5LS_TESTFILES/vds/1_f.h5 +$SRC_H5LS_TESTFILES/vds/1_vds.h5 +$SRC_H5LS_TESTFILES/vds/2_a.h5 +$SRC_H5LS_TESTFILES/vds/2_b.h5 +$SRC_H5LS_TESTFILES/vds/2_c.h5 +$SRC_H5LS_TESTFILES/vds/2_d.h5 +$SRC_H5LS_TESTFILES/vds/2_e.h5 +$SRC_H5LS_TESTFILES/vds/2_vds.h5 +$SRC_H5LS_TESTFILES/vds/3_1_vds.h5 +$SRC_H5LS_TESTFILES/vds/3_2_vds.h5 +$SRC_H5LS_TESTFILES/vds/4_0.h5 +$SRC_H5LS_TESTFILES/vds/4_1.h5 +$SRC_H5LS_TESTFILES/vds/4_2.h5 +$SRC_H5LS_TESTFILES/vds/4_vds.h5 +$SRC_H5LS_TESTFILES/vds/5_a.h5 +$SRC_H5LS_TESTFILES/vds/5_b.h5 +$SRC_H5LS_TESTFILES/vds/5_c.h5 +$SRC_H5LS_TESTFILES/vds/5_vds.h5 +" + +LIST_OTHER_TEST_FILES=" +$SRC_H5LS_TESTFILES/vds/tvds-1.ls +$SRC_H5LS_TESTFILES/vds/tvds-2.ls +$SRC_H5LS_TESTFILES/vds/tvds-3_1.ls +$SRC_H5LS_TESTFILES/vds/tvds-3_2.ls +$SRC_H5LS_TESTFILES/vds/tvds-4.ls +$SRC_H5LS_TESTFILES/vds/tvds-5.ls +" + + +# RUNSERIAL is used. Check if it can return exit code from executalbe correctly. +if [ -n "$RUNSERIAL_NOEXITCODE" ]; then + echo "***Warning*** Serial Exit Code is not passed back to shell corretly." + echo "***Warning*** Exit code checking is skipped." + h5haveexitcode=no +fi + +# +# copy test files and expected output files from source dirs to test dir +# +COPY_TESTFILES="$LIST_HDF5_TEST_FILES $LIST_OTHER_TEST_FILES" + +COPY_TESTFILES_TO_TESTDIR() +{ + # copy test files. Used -f to make sure get a new copy + for tstfile in $COPY_TESTFILES + do + # ignore '#' comment + echo $tstfile | tr -d ' ' | grep '^#' > /dev/null + RET=$? + if [ $RET -eq 1 ]; then + # skip cp if srcdir is same as destdir + # this occurs when build/test performed in source dir and + # make cp fail + SDIR=`$DIRNAME $tstfile` + INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` + INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` + if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then + $CP -f $tstfile $TESTDIR + if [ $? -ne 0 ]; then + echo "Error: FAILED to copy $tstfile ." + + # Comment out this to CREATE expected file + exit $EXIT_FAILURE + fi + fi + fi + done +} + +CLEAN_TESTFILES_AND_TESTDIR() +{ + # skip rm if srcdir is same as destdir + # this occurs when build/test performed in source dir and + # make cp fail + SDIR=$SRC_H5LS_TESTFILES/vds + INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` + INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` + if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then + $RM $TESTDIR + fi +} + +# Print a line-line message left justified in a field of 70 characters +# beginning with the word "Testing". +TESTING() { + SPACES=" " + echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012' +} + +# Source in the output filter function definitions. +. $srcdir/../../../bin/output_filter.sh + +# Run a test and print PASS or *FAIL*. For now, if h5ls can complete +# with exit status 0, consider it pass. If a test fails then increment +# the `nerrors' global variable and (if $verbose is set) display up to $NLINS +# lines of the actual output from the tool test. The actual output is not +# removed if $HDF5_NOCLEANUP has a non-zero value. +# Arguemnts: +# $1 -- actual output filename to use +# $2 and on -- argument for the h5ls tool +TOOLTEST() { + expect="$TESTDIR/$1" + actual="$TESTDIR/`basename $1 .ls`.out" + actual_err="$TESTDIR/`basename $1 .ls`.err" + actual_sav=${actual}-sav + actual_err_sav=${actual_err}-sav + shift + retvalexpect=$1 + shift + + # Run test. + # Stderr is included in stdout so that the diff can detect + # any unexpected output from that stream too. + TESTING $H5LS $@ + ( + cd $TESTDIR + $RUNSERIAL $H5LS_BIN "$@" + ) >$actual 2>$actual_err + + exitcode=$? + # save actual and actual_err in case they are needed later. + cp $actual $actual_sav + STDOUT_FILTER $actual + cp $actual_err $actual_err_sav + STDERR_FILTER $actual_err + cat $actual_err >> $actual + if [ $h5haveexitcode = 'yes' -a $exitcode -ne $retvalexpect ]; then + echo "*FAILED*" + nerrors="`expr $nerrors + 1`" + if [ yes = "$verbose" ]; then + echo "test returned with exit code $exitcode" + echo "test output: (up to $NLINES lines)" + head -$NLINES $actual + echo "***end of test output***" + echo "" + fi + elif [ ! -f $expect ]; then + # Create the expect file if it doesn't yet exist. + echo " CREATED" + cp $actual $expect + elif $CMP $expect $actual; then + echo " PASSED" + else + echo "*FAILED*" + echo " Expected result differs from actual result" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' + fi + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f $actual $actual_err $actual_sav $actual_err_sav + fi +} + +############################################################################## +############################################################################## +### T H E T E S T S ### +############################################################################## +############################################################################## +# prepare for test +COPY_TESTFILES_TO_TESTDIR + +####### test for dataset vds ###### + +TOOLTEST tvds-1.ls 0 -w80 -v -S 1_vds.h5 +TOOLTEST tvds-2.ls 0 -w80 -v -S 2_vds.h5 +TOOLTEST tvds-3_1.ls 0 -w80 -v -S 3_1_vds.h5 +TOOLTEST tvds-3_2.ls 0 -w80 -v -S 3_2_vds.h5 +TOOLTEST tvds-4.ls 0 -w80 -v -S 4_vds.h5 +TOOLTEST tvds-5.ls 0 -w80 -v -S 5_vds.h5 + +# Clean up temporary files/directories +CLEAN_TESTFILES_AND_TESTDIR + +if test $nerrors -eq 0 ; then + echo "All $TESTNAME tests passed." + exit $EXIT_SUCCESS +else + echo "$TESTNAME tests failed with $nerrors errors." + exit $EXIT_FAILURE +fi |