diff options
Diffstat (limited to 'tools/test/misc/testh5mkgrp.sh.in')
| -rw-r--r-- | tools/test/misc/testh5mkgrp.sh.in | 325 |
1 files changed, 325 insertions, 0 deletions
diff --git a/tools/test/misc/testh5mkgrp.sh.in b/tools/test/misc/testh5mkgrp.sh.in new file mode 100644 index 0000000..83ffe16 --- /dev/null +++ b/tools/test/misc/testh5mkgrp.sh.in @@ -0,0 +1,325 @@ +#! /bin/sh +# +# Copyright by The HDF Group. +# Copyright by the Board of Trustees of the University of Illinois. +# All rights reserved. +# +# This file is part of HDF5. The full HDF5 copyright notice, including +# terms governing use, modification, and redistribution, is contained in +# the files COPYING and Copyright.html. COPYING can be found at the root +# of the source code distribution tree; Copyright.html can be found at the +# root level of an installed copy of the electronic HDF5 document set and +# is linked from the top-level documents page. It can also be found at +# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have +# access to either file, you may request a copy from help@hdfgroup.org. +# +# Tests for the h5mkgrp tool +# +# Quincey Koziol (koziol@hdfgroup.org) +# Tuesday, February 13, 2007 +# + +srcdir=@srcdir@ + +TESTNAME=h5mkgrp +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +H5MKGRP=../../src/misc/h5mkgrp # The tool name +H5MKGRP_BIN=`pwd`/$H5MKGRP # The path of the tool binary +H5LS=../../src/h5ls/h5ls # The h5ls tool name +H5LS_ARGS=-vr # Arguments to the h5ls tool +H5LS_BIN=`pwd`/$H5LS # The path of the h5ls tool binary + +RM='rm -rf' +CMP='cmp' +DIFF='diff -c' +CP='cp' +DIRNAME='dirname' +LS='ls' +AWK='awk' + +nerrors=0 +verbose=yes + +# source dirs +SRC_TOOLS="$srcdir/../.." + +SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" +# testfiles source dirs for tools +SRC_H5MKGRP_TESTFILES="$SRC_TOOLS/test/misc/testfiles" + +TESTDIR=./testgrp +test -d $TESTDIR || mkdir -p $TESTDIR + +###################################################################### +# test files +# -------------------------------------------------------------------- +# All the test files copy from source directory to test directory +# NOTE: Keep this framework to add/remove test files. +# Any test files from other tools can be used in this framework. +# This list are also used for checking exist. +# Comment '#' without space can be used. +# -------------------------------------------------------------------- + +CMP='cmp -s' +DIFF='diff -c' + +# +# copy test files and expected output files from source dirs to test dir +# +COPY_TESTFILES=" +$SRC_H5MKGRP_TESTFILES/h5mkgrp_help.txt +$SRC_TOOLS_TESTFILES/h5mkgrp_single.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_single_v.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_single_p.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_single_l.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_several.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_several_v.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_several_p.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_several_l.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_nested_p.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_nested_lp.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_p.ls +$SRC_TOOLS_TESTFILES/h5mkgrp_nested_mult_lp.ls +" + +COPY_TESTFILES_TO_TESTDIR() +{ + # copy test files. Used -f to make sure get a new copy + for tstfile in $COPY_TESTFILES + do + # ignore '#' comment + echo $tstfile | tr -d ' ' | grep '^#' > /dev/null + RET=$? + if [ $RET -eq 1 ]; then + # skip cp if srcdir is same as destdir + # this occurs when build/test performed in source dir and + # make cp fail + SDIR=`$DIRNAME $tstfile` + INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` + INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` + if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then + $CP -f $tstfile $TESTDIR + if [ $? -ne 0 ]; then + echo "Error: FAILED to copy $tstfile ." + + # Comment out this to CREATE expected file + exit $EXIT_FAILURE + fi + fi + fi + done +} + +CLEAN_TESTFILES_AND_TESTDIR() +{ + # skip rm if srcdir is same as destdir + # this occurs when build/test performed in source dir and + # make cp fail + SDIR=$SRC_H5MKGRP_TESTFILES + INODE_SDIR=`$LS -i -d $SDIR | $AWK -F' ' '{print $1}'` + INODE_DDIR=`$LS -i -d $TESTDIR | $AWK -F' ' '{print $1}'` + if [ "$INODE_SDIR" != "$INODE_DDIR" ]; then + $RM $TESTDIR + fi +} + +# Print a line-line message left justified in a field of 70 characters +# beginning with the word "Testing". +TESTING() +{ + SPACES=" " + echo "Testing $* $SPACES" |cut -c1-70 |tr -d '\012' +} + +# Source in the output filter function definitions. +. $srcdir/../../../bin/output_filter.sh + +# Print a line-line message left justified in a field of 70 characters +# beginning with the word "Verifying". +# +VERIFY_H5LS() +{ + SPACES=" " + echo "Verifying h5ls file structure $* $SPACES" | cut -c1-70 | tr -d '\012' +} + +# Run a test and print PASS or *FAIL*. If h5mkgrp can complete +# with exit status 0, consider it pass. If a test fails then increment +# the `nerrors' global variable. +# Assumed arguments: +# $* arguments for h5mkgrp. + +TOOLTEST() +{ + TESTING $H5MKGRP $@ + ( + cd $TESTDIR + $RUNSERIAL $H5MKGRP_BIN $@ + ) > output.out + RET=$? + if [ $RET != 0 ]; then + echo "*FAILED*" + echo "failed result is:" + cat output.out + nerrors="`expr $nerrors + 1`" + else + echo " PASSED" + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f output.out + fi + fi +} + +# Call the h5ls tool to verify the correct output data in the destination file +# +H5LSTEST() +{ + expect="$TESTDIR/`basename $1 .h5`.ls" + actual="$TESTDIR/`basename $1 .h5`.out" + actual_sav=${actual}-sav + + # Stderr is included in stdout so that the diff can detect + # any unexpected output from that stream too. + VERIFY_H5LS $@ + ( + cd $TESTDIR + $RUNSERIAL $H5LS_BIN $H5LS_ARGS $@ + ) 2>&1 |sed 's/Modified:.*/Modified: XXXX-XX-XX XX:XX:XX XXX/' >$actual + + # save actual in case it is needed later. + cp $actual $actual_sav + STDOUT_FILTER $actual + STDERR_FILTER $actual + + if [ ! -f $expect ]; then + # Create the expect file if it doesn't yet exist. + echo " CREATED" + cp $actual $expect + elif $CMP $expect $actual; then + echo " PASSED" + else + echo "*FAILED*" + echo " Expected result (*.ls) differs from actual result (*.out)" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' + fi + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f $actual $actual_sav + fi +} + +# Single run of tool +# +# Assumed arguments: +# $1 is test file name +# $2 is h5mkgrp options +# $* are groups to create +RUNTEST() +{ + FILEOUT=$1 + shift + H5MKGRP_ARGS=$1 + shift + + # Remove any output file left over from previous test run + rm -f $FILEOUT + + # Run test + TOOLTEST $H5MKGRP_ARGS $FILEOUT $@ + + # Verify that the file created above is correct + H5LSTEST $FILEOUT + + # Remove output file created, if the "no cleanup" environment variable is + # not defined + if test -z "$HDF5_NOCLEANUP"; then + rm -f $TESTDIR/$FILEOUT + fi +} + +# Single run of tool +# +# Assumed arguments: +# $1 is test expected output file +# $2 is h5mkgrp options +# $* are groups to create +CMPTEST() +{ + FILEOUT=$1 + expect="$TESTDIR/`basename $1 .h5`.txt" + actual="$TESTDIR/`basename $1 .h5`.out" + actual_err="$TESTDIR/`basename $1 .h5`.err" + shift + + # Stderr is included in stdout so that the diff can detect + # any unexpected output from that stream too. + TESTING $H5MKGRP $@ + ( + cd $TESTDIR + $RUNSERIAL $H5MKGRP_BIN $@ + ) >$actual 2>$actual_err + cat $actual_err >> $actual + + if [ ! -f $expect ]; then + # Create the expect file if it doesn't yet exist. + echo " CREATED" + cp $actual $expect + elif $CMP $expect $actual; then + echo " PASSED" + else + echo "*FAILED*" + echo " Expected result (*.txt) differs from actual result (*.out)" + nerrors="`expr $nerrors + 1`" + test yes = "$verbose" && $DIFF $expect $actual |sed 's/^/ /' + fi + + # Clean up output file + if test -z "$HDF5_NOCLEANUP"; then + rm -f $actual $actual_err + fi +} + +############################################################################## +### T H E T E S T S ### +############################################################################## +# prepare for test +COPY_TESTFILES_TO_TESTDIR + +# Check that help & version is displayed properly +CMPTEST h5mkgrp_help.h5 "-h" +#CMPTEST h5mkgrp_version.h5 "-V" + +# Create single group at root level +RUNTEST h5mkgrp_single.h5 " " single +RUNTEST h5mkgrp_single_v.h5 "-v" single +RUNTEST h5mkgrp_single_p.h5 "-p" single +RUNTEST h5mkgrp_single_l.h5 "-l" latest + +# Create several groups at root level +RUNTEST h5mkgrp_several.h5 " " one two +RUNTEST h5mkgrp_several_v.h5 "-v" one two +RUNTEST h5mkgrp_several_p.h5 "-p" one two +RUNTEST h5mkgrp_several_l.h5 "-l" one two + +# Create various nested groups +RUNTEST h5mkgrp_nested_p.h5 "-p" /one/two +RUNTEST h5mkgrp_nested_lp.h5 "-lp" /one/two +RUNTEST h5mkgrp_nested_mult_p.h5 "-p" /one/two /three/four +RUNTEST h5mkgrp_nested_mult_lp.h5 "-lp" /one/two /three/four + +# Clean up temporary files/directories +CLEAN_TESTFILES_AND_TESTDIR + +if test $nerrors -eq 0 ; then + echo "All $TESTNAME tests passed." + exit $EXIT_SUCCESS +else + echo "$TESTNAME tests failed with $nerrors errors." + exit $EXIT_FAILURE +fi |