diff options
Diffstat (limited to 'tools/test/perform/perf.c')
-rw-r--r-- | tools/test/perform/perf.c | 476 |
1 files changed, 0 insertions, 476 deletions
diff --git a/tools/test/perform/perf.c b/tools/test/perform/perf.c deleted file mode 100644 index bf4b2a9..0000000 --- a/tools/test/perform/perf.c +++ /dev/null @@ -1,476 +0,0 @@ -/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * - * Copyright by The HDF Group. * - * Copyright by the Board of Trustees of the University of Illinois. * - * All rights reserved. * - * * - * This file is part of HDF5. The full HDF5 copyright notice, including * - * terms governing use, modification, and redistribution, is contained in * - * the COPYING file, which can be found at the root of the source code * - * distribution tree, or in https://www.hdfgroup.org/licenses. * - * If you do not have access to either file, you may request a copy from * - * help@hdfgroup.org. * - * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ - -/* - * Author: Albert Cheng of NCSA, May 1, 2001. - * This is derived from code given to me by Robert Ross. - * - * NOTE: This code assumes that all command line arguments make it out to all - * the processes that make up the parallel job, which isn't always the case. - * So if it doesn't work on some platform, that might be why. - */ - -#include "hdf5.h" -#include "H5private.h" -#include "h5test.h" - -#ifdef H5_HAVE_PARALLEL - -#ifdef H5_STDC_HEADERS -#include <errno.h> -#include <fcntl.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#endif - -#ifdef H5_HAVE_UNISTD_H -#include <sys/types.h> -#include <unistd.h> -#endif - -#ifdef H5_HAVE_SYS_STAT_H -#include <sys/stat.h> -#endif - -#if defined(H5_TIME_WITH_SYS_TIME) -#include <sys/time.h> -#include <time.h> -#elif defined(H5_HAVE_SYS_TIME_H) -#include <sys/time.h> -#else -#include <time.h> -#endif - -#include <mpi.h> -#ifndef MPI_FILE_NULL /*MPIO may be defined in mpi.h already */ -#include <mpio.h> -#endif - -/* Macro definitions */ -/* Verify: - * if val is false (0), print mesg and if fatal is true (non-zero), die. - */ -#define H5FATAL 1 -#define VRFY(val, mesg, fatal) \ - do { \ - if (!val) { \ - printf("Proc %d: ", mynod); \ - printf("*** Assertion failed (%s) at line %4d in %s\n", mesg, (int)__LINE__, __FILE__); \ - if (fatal) { \ - fflush(stdout); \ - goto die_jar_jar_die; \ - } \ - } \ - } while (0) -#define RANK 1 -#define MAX_PATH 1024 - -hsize_t dims[RANK]; /* dataset dim sizes */ -hsize_t block[RANK], stride[RANK], count[RANK]; -hsize_t start[RANK]; -hid_t fid; /* HDF5 file ID */ -hid_t acc_tpl; /* File access templates */ -hid_t sid; /* Dataspace ID */ -hid_t file_dataspace; /* File dataspace ID */ -hid_t mem_dataspace; /* memory dataspace ID */ -hid_t dataset; /* Dataset ID */ -hsize_t opt_alignment = 1; -hsize_t opt_threshold = 1; -int opt_split_vfd = 0; -char * meta_ext, *raw_ext; /* holds the meta and raw file extension if */ - /* opt_split_vfd is set */ - -/* DEFAULT VALUES FOR OPTIONS */ -int64_t opt_block = 1048576 * 16; -int opt_iter = 1; -int opt_stripe = -1; -int opt_correct = 0; -int amode = O_RDWR | O_CREAT; -char opt_file[256] = "perftest.out"; -char opt_pvfstab[256] = "notset"; -int opt_pvfstab_set = 0; - -const char *FILENAME[] = {opt_file, NULL}; - -/* function prototypes */ -static int parse_args(int argc, char **argv); - -#ifndef H5_HAVE_UNISTD_H -/* globals needed for getopt */ -extern char *optarg; -#endif - -int -main(int argc, char **argv) -{ - char * buf, *tmp, *buf2 = NULL, *tmp2 = NULL, *check; - int i, j, mynod = 0, nprocs = 1, my_correct = 1, correct, myerrno; - double stim, etim; - double write_tim = 0; - double read_tim = 0; - double read_bw, write_bw; - double max_read_tim, max_write_tim; - double min_read_tim, min_write_tim; - double ave_read_tim, ave_write_tim; - int64_t iter_jump = 0; - char filename[MAX_PATH]; - herr_t ret; /* Generic return value */ - - /* startup MPI and determine the rank of this process */ - MPI_Init(&argc, &argv); - MPI_Comm_size(MPI_COMM_WORLD, &nprocs); - MPI_Comm_rank(MPI_COMM_WORLD, &mynod); - - /* parse the command line arguments */ - parse_args(argc, argv); - - if (mynod == 0) - printf("# Using hdf5-io calls.\n"); - - /* kindof a weird hack- if the location of the pvfstab file was - * specified on the command line, then spit out this location into - * the appropriate environment variable: */ - -#if H5_HAVE_SETENV - /* no setenv or unsetenv */ - if (opt_pvfstab_set) { - if ((setenv("PVFSTAB_FILE", opt_pvfstab, 1)) < 0) { - perror("setenv"); - goto die_jar_jar_die; - } - } -#endif - - /* this is how much of the file data is covered on each iteration of - * the test. used to help determine the seek offset on each - * iteration */ - iter_jump = nprocs * opt_block; - - /* setup a buffer of data to write */ - if (!(tmp = (char *)malloc((size_t)opt_block + 256))) { - perror("malloc"); - goto die_jar_jar_die; - } - buf = tmp + 128 - (((long)tmp) % 128); /* align buffer */ - - if (opt_correct) { - /* do the same buffer setup for verifiable data */ - if (!(tmp2 = (char *)malloc((size_t)opt_block + 256))) { - perror("malloc2"); - goto die_jar_jar_die; - } - buf2 = tmp + 128 - (((long)tmp) % 128); - } - - /* setup file access template with parallel IO access. */ - if (opt_split_vfd) { - hid_t mpio_pl; - - mpio_pl = H5Pcreate(H5P_FILE_ACCESS); - VRFY((acc_tpl >= 0), "", H5FATAL); - ret = H5Pset_fapl_mpio(mpio_pl, MPI_COMM_WORLD, MPI_INFO_NULL); - VRFY((ret >= 0), "", H5FATAL); - - /* set optional allocation alignment */ - if (opt_alignment * opt_threshold != 1) { - ret = H5Pset_alignment(acc_tpl, opt_threshold, opt_alignment); - VRFY((ret >= 0), "H5Pset_alignment succeeded", !H5FATAL); - } - - /* setup file access template */ - acc_tpl = H5Pcreate(H5P_FILE_ACCESS); - VRFY((acc_tpl >= 0), "", H5FATAL); - ret = H5Pset_fapl_split(acc_tpl, meta_ext, mpio_pl, raw_ext, mpio_pl); - VRFY((ret >= 0), "H5Pset_fapl_split succeeded", H5FATAL); - ret = H5Pclose(mpio_pl); - VRFY((ret >= 0), "H5Pclose mpio_pl succeeded", H5FATAL); - } - else { - /* setup file access template */ - acc_tpl = H5Pcreate(H5P_FILE_ACCESS); - VRFY((acc_tpl >= 0), "", H5FATAL); - ret = H5Pset_fapl_mpio(acc_tpl, MPI_COMM_WORLD, MPI_INFO_NULL); - VRFY((ret >= 0), "", H5FATAL); - - /* set optional allocation alignment */ - if (opt_alignment * opt_threshold != 1) { - ret = H5Pset_alignment(acc_tpl, opt_threshold, opt_alignment); - VRFY((ret >= 0), "H5Pset_alignment succeeded", !H5FATAL); - } - } - - h5_fixname_no_suffix(FILENAME[0], acc_tpl, filename, sizeof filename); - - /* create the parallel file */ - fid = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, acc_tpl); - VRFY((fid >= 0), "H5Fcreate succeeded", H5FATAL); - - /* define a contiquous dataset of opt_iter*nprocs*opt_block chars */ - dims[0] = (hsize_t)opt_iter * (hsize_t)nprocs * (hsize_t)opt_block; - sid = H5Screate_simple(RANK, dims, NULL); - VRFY((sid >= 0), "H5Screate_simple succeeded", H5FATAL); - dataset = H5Dcreate2(fid, "Dataset1", H5T_NATIVE_CHAR, sid, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT); - VRFY((dataset >= 0), "H5Dcreate2 succeeded", H5FATAL); - - /* create the memory dataspace and the file dataspace */ - dims[0] = (hsize_t)opt_block; - mem_dataspace = H5Screate_simple(RANK, dims, NULL); - VRFY((mem_dataspace >= 0), "", H5FATAL); - file_dataspace = H5Dget_space(dataset); - VRFY((file_dataspace >= 0), "H5Dget_space succeeded", H5FATAL); - - /* now each process writes a block of opt_block chars in round robbin - * fashion until the whole dataset is covered. - */ - for (j = 0; j < opt_iter; j++) { - /* setup a file dataspace selection */ - start[0] = (hsize_t)((j * iter_jump) + (mynod * opt_block)); - stride[0] = block[0] = (hsize_t)opt_block; - count[0] = 1; - ret = H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block); - VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL); - - if (opt_correct) /* fill in buffer for iteration */ { - for (i = mynod + j, check = buf; i < opt_block; i++, check++) - *check = (char)i; - } - - /* discover the starting time of the operation */ - MPI_Barrier(MPI_COMM_WORLD); - stim = MPI_Wtime(); - - /* write data */ - ret = H5Dwrite(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, H5P_DEFAULT, buf); - VRFY((ret >= 0), "H5Dwrite dataset1 succeeded", !H5FATAL); - - /* discover the ending time of the operation */ - etim = MPI_Wtime(); - - write_tim += (etim - stim); - - /* we are done with this "write" iteration */ - } - - /* close dataset and file */ - ret = H5Dclose(dataset); - VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL); - ret = H5Fclose(fid); - VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL); - - /* wait for everyone to synchronize at this point */ - MPI_Barrier(MPI_COMM_WORLD); - - /* reopen the file for reading */ - fid = H5Fopen(filename, H5F_ACC_RDONLY, acc_tpl); - VRFY((fid >= 0), "", H5FATAL); - - /* open the dataset */ - dataset = H5Dopen2(fid, "Dataset1", H5P_DEFAULT); - VRFY((dataset >= 0), "H5Dopen succeeded", H5FATAL); - - /* we can re-use the same mem_dataspace and file_dataspace - * the H5Dwrite used since the dimension size is the same. - */ - - /* we are going to repeat the read the same pattern the write used */ - for (j = 0; j < opt_iter; j++) { - /* setup a file dataspace selection */ - start[0] = (hsize_t)((j * iter_jump) + (mynod * opt_block)); - stride[0] = block[0] = (hsize_t)opt_block; - count[0] = 1; - ret = H5Sselect_hyperslab(file_dataspace, H5S_SELECT_SET, start, stride, count, block); - VRFY((ret >= 0), "H5Sset_hyperslab succeeded", H5FATAL); - /* seek to the appropriate spot give the current iteration and - * rank within the MPI processes */ - - /* discover the start time */ - MPI_Barrier(MPI_COMM_WORLD); - stim = MPI_Wtime(); - - /* read in the file data */ - if (!opt_correct) { - ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, H5P_DEFAULT, buf); - } - else { - ret = H5Dread(dataset, H5T_NATIVE_CHAR, mem_dataspace, file_dataspace, H5P_DEFAULT, buf2); - } - myerrno = errno; - - /* discover the end time */ - etim = MPI_Wtime(); - read_tim += (etim - stim); - VRFY((ret >= 0), "H5Dwrite dataset1 succeeded", !H5FATAL); - - if (ret < 0) - HDfprintf(stderr, "node %d, read error, loc = %" PRId64 ": %s\n", mynod, mynod * opt_block, - strerror(myerrno)); - - /* if the user wanted to check correctness, compare the write - * buffer to the read buffer */ - if (opt_correct && memcmp(buf, buf2, (size_t)opt_block)) { - HDfprintf(stderr, "node %d, correctness test failed\n", mynod); - my_correct = 0; - MPI_Allreduce(&my_correct, &correct, 1, MPI_INT, MPI_MIN, MPI_COMM_WORLD); - } - - /* we are done with this read iteration */ - } - - /* close dataset and file */ - ret = H5Dclose(dataset); - VRFY((ret >= 0), "H5Dclose succeeded", H5FATAL); - ret = H5Fclose(fid); - VRFY((ret >= 0), "H5Fclose succeeded", H5FATAL); - ret = H5Pclose(acc_tpl); - VRFY((ret >= 0), "H5Pclose succeeded", H5FATAL); - - /* compute the read and write times */ - MPI_Allreduce(&read_tim, &max_read_tim, 1, MPI_DOUBLE, MPI_MAX, MPI_COMM_WORLD); - MPI_Allreduce(&read_tim, &min_read_tim, 1, MPI_DOUBLE, MPI_MIN, MPI_COMM_WORLD); - MPI_Allreduce(&read_tim, &ave_read_tim, 1, MPI_DOUBLE, MPI_SUM, MPI_COMM_WORLD); - - /* calculate the average from the sum */ - ave_read_tim = ave_read_tim / nprocs; - - MPI_Allreduce(&write_tim, &max_write_tim, 1, MPI_DOUBLE, MPI_MAX, MPI_COMM_WORLD); - MPI_Allreduce(&write_tim, &min_write_tim, 1, MPI_DOUBLE, MPI_MIN, MPI_COMM_WORLD); - MPI_Allreduce(&write_tim, &ave_write_tim, 1, MPI_DOUBLE, MPI_SUM, MPI_COMM_WORLD); - - /* calculate the average from the sum */ - ave_write_tim = ave_write_tim / nprocs; - - /* print out the results on one node */ - if (mynod == 0) { - read_bw = (double)((int64_t)(opt_block * nprocs * opt_iter)) / (max_read_tim * 1000000.0); - write_bw = (double)((int64_t)(opt_block * nprocs * opt_iter)) / (max_write_tim * 1000000.0); - - printf("nr_procs = %d, nr_iter = %d, blk_sz = %ld\n", nprocs, opt_iter, (long)opt_block); - - printf("# total_size = %ld\n", (long)(opt_block * nprocs * opt_iter)); - - printf("# Write: min_time = %f, max_time = %f, mean_time = %f\n", min_write_tim, max_write_tim, - ave_write_tim); - printf("# Read: min_time = %f, max_time = %f, mean_time = %f\n", min_read_tim, max_read_tim, - ave_read_tim); - - printf("Write bandwidth = %f Mbytes/sec\n", write_bw); - printf("Read bandwidth = %f Mbytes/sec\n", read_bw); - - if (opt_correct) { - printf("Correctness test %s.\n", correct ? "passed" : "failed"); - } - } - -die_jar_jar_die: - -#if H5_HAVE_SETENV - /* no setenv or unsetenv */ - /* clear the environment variable if it was set earlier */ - if (opt_pvfstab_set) { - unsetenv("PVFSTAB_FILE"); - } -#endif - - free(tmp); - if (opt_correct) - free(tmp2); - - MPI_Finalize(); - - return (0); -} - -static int -parse_args(int argc, char **argv) -{ - int c; - - while ((c = getopt(argc, argv, "s:b:i:f:p:a:2:c")) != EOF) { - switch (c) { - case 's': /* stripe */ - opt_stripe = atoi(optarg); - break; - case 'b': /* block size */ - opt_block = atoi(optarg); - break; - case 'i': /* iterations */ - opt_iter = atoi(optarg); - break; - case 'f': /* filename */ - strncpy(opt_file, optarg, 255); - FILENAME[0] = opt_file; - break; - case 'p': /* pvfstab file */ - strncpy(opt_pvfstab, optarg, 255); - opt_pvfstab_set = 1; - break; - case 'a': /* aligned allocation. - * syntax: -a<alignment>/<threshold> - * e.g., -a4096/512 allocate at 4096 bytes - * boundary if request size >= 512. - */ - { - char *p; - - opt_alignment = (hsize_t)HDatoi(optarg); - if (NULL != (p = (char *)HDstrchr(optarg, '/'))) - opt_threshold = (hsize_t)HDatoi(p + 1); - } - HDfprintf(stdout, "alignment/threshold=%" PRIuHSIZE "/%" PRIuHSIZE "\n", opt_alignment, - opt_threshold); - break; - case '2': /* use 2-files, i.e., split file driver */ - opt_split_vfd = 1; - /* get meta and raw file extension. */ - /* syntax is <raw_ext>,<meta_ext> */ - meta_ext = raw_ext = optarg; - while (*raw_ext != '\0') { - if (*raw_ext == ',') { - *raw_ext = '\0'; - raw_ext++; - break; - } - raw_ext++; - } - printf("split-file-vfd used: %s,%s\n", meta_ext, raw_ext); - break; - case 'c': /* correctness */ - opt_correct = 1; - break; - case '?': /* unknown */ - default: - break; - } - } - - return (0); -} - -/* - * Local variables: - * c-indent-level: 3 - * c-basic-offset: 3 - * tab-width: 3 - * End: - */ - -#else /* H5_HAVE_PARALLEL */ -/* dummy program since H5_HAVE_PARALLEL is not configured in */ -int -main(int H5_ATTR_UNUSED argc, char H5_ATTR_UNUSED **argv) -{ - printf("No parallel performance because parallel is not configured in\n"); - return (0); -} -#endif /* H5_HAVE_PARALLEL */ |