diff options
Diffstat (limited to 'tools/test')
-rw-r--r-- | tools/test/misc/h5clear_gentest.c | 118 | ||||
-rw-r--r-- | tools/test/misc/testfiles/mod_h5clear_mdc_image.h5 | bin | 0 -> 22048 bytes | |||
-rw-r--r-- | tools/test/misc/testh5clear.sh.in | 104 |
3 files changed, 116 insertions, 106 deletions
diff --git a/tools/test/misc/h5clear_gentest.c b/tools/test/misc/h5clear_gentest.c index f8b6a70..86ea3d2 100644 --- a/tools/test/misc/h5clear_gentest.c +++ b/tools/test/misc/h5clear_gentest.c @@ -142,7 +142,7 @@ error: * status_flags properly so users can open the files afterwards. * * Return: Success: 0 - * Failure: 1 + * Failure: 1 * * Programmer: Vailin Choi; July 2013 * @@ -167,65 +167,65 @@ main(void) /* Create a copy of the file access property list */ if((fapl = H5Pcreate(H5P_FILE_ACCESS)) < 0) - goto error; + goto error; /* Copy the file access property list */ if((new_fapl = H5Pcopy(fapl)) < 0) - goto error; + goto error; /* Set to latest library format */ if(H5Pset_libver_bounds(new_fapl, H5F_LIBVER_LATEST, H5F_LIBVER_LATEST) < 0) - goto error; + goto error; /* Files created within this for loop will have v3 superblock and nonzero status_flags */ for(new_format = FALSE; new_format <= TRUE; new_format++) { - hid_t fapl2, my_fapl; /* File access property lists */ - - /* Set to use the appropriate file access property list */ - if(new_format) - fapl2 = new_fapl; - else - fapl2 = fapl; - /* - * Create a sec2 file - */ - if((my_fapl = H5Pcopy(fapl2)) < 0) - goto error; - /* Create the file */ - sprintf(fname, "%s%s", new_format? "latest_":"", FILENAME[0]); - if((fid = H5Fcreate(fname, H5F_ACC_TRUNC | (new_format ? 0 : H5F_ACC_SWMR_WRITE), H5P_DEFAULT, my_fapl)) < 0) - goto error; - - /* Flush the file */ - if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) - goto error; + hid_t fapl2, my_fapl; /* File access property lists */ + + /* Set to use the appropriate file access property list */ + if(new_format) + fapl2 = new_fapl; + else + fapl2 = fapl; + /* + * Create a sec2 file + */ + if((my_fapl = H5Pcopy(fapl2)) < 0) + goto error; + /* Create the file */ + sprintf(fname, "%s%s", new_format? "latest_":"", FILENAME[0]); + if((fid = H5Fcreate(fname, H5F_ACC_TRUNC | (new_format ? 0 : H5F_ACC_SWMR_WRITE), H5P_DEFAULT, my_fapl)) < 0) + goto error; + + /* Flush the file */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + goto error; - /* Close the property list */ - if(H5Pclose(my_fapl) < 0) - goto error; - - /* - * Create a log file - */ - /* Create a copy of file access property list */ - if((my_fapl = H5Pcopy(fapl2)) < 0) - goto error; - - /* Setup the fapl for the log driver */ - if(H5Pset_fapl_log(my_fapl, "append.log", (unsigned long long)H5FD_LOG_ALL, (size_t)(4 * KB)) < 0) - goto error; - - /* Create the file */ - sprintf(fname, "%s%s", new_format? "latest_":"", FILENAME[1]); - if((fid = H5Fcreate(fname, H5F_ACC_TRUNC | (new_format ? 0 : H5F_ACC_SWMR_WRITE), H5P_DEFAULT, my_fapl)) < 0) - goto error; - - /* Flush the file */ - if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) - goto error; - - /* Close the property list */ - if(H5Pclose(my_fapl) < 0) - goto error; + /* Close the property list */ + if(H5Pclose(my_fapl) < 0) + goto error; + + /* + * Create a log file + */ + /* Create a copy of file access property list */ + if((my_fapl = H5Pcopy(fapl2)) < 0) + goto error; + + /* Setup the fapl for the log driver */ + if(H5Pset_fapl_log(my_fapl, "append.log", (unsigned long long)H5FD_LOG_ALL, (size_t)(4 * KB)) < 0) + goto error; + + /* Create the file */ + sprintf(fname, "%s%s", new_format? "latest_":"", FILENAME[1]); + if((fid = H5Fcreate(fname, H5F_ACC_TRUNC | (new_format ? 0 : H5F_ACC_SWMR_WRITE), H5P_DEFAULT, my_fapl)) < 0) + goto error; + + /* Flush the file */ + if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) + goto error; + + /* Close the property list */ + if(H5Pclose(my_fapl) < 0) + goto error; } /* end for */ @@ -233,38 +233,38 @@ main(void) * Create a sec2 file with v0 superblock but nonzero status_flags */ if((fid = H5Fcreate(FILENAME[2], H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0) - goto error; + goto error; /* Flush the file */ if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) - goto error; + goto error; /* * Create a sec2 file with v2 superblock but nonzero status_flags */ if((fcpl = H5Pcreate(H5P_FILE_CREATE)) < 0) - goto error; + goto error; if(H5Pset_shared_mesg_nindexes(fcpl, 1) < 0) goto error; if(H5Pset_shared_mesg_index(fcpl, 0, H5O_SHMESG_DTYPE_FLAG, 50) < 0) goto error; if((fid = H5Fcreate(FILENAME[3], H5F_ACC_TRUNC, fcpl, fapl)) < 0) - goto error; + goto error; /* Flush the file */ if(H5Fflush(fid, H5F_SCOPE_GLOBAL) < 0) - goto error; + goto error; /* Close the property lists */ if(H5Pclose(fapl) < 0) - goto error; + goto error; if(H5Pclose(new_fapl) < 0) - goto error; + goto error; if(H5Pclose(fcpl) < 0) - goto error; + goto error; fflush(stdout); fflush(stderr); diff --git a/tools/test/misc/testfiles/mod_h5clear_mdc_image.h5 b/tools/test/misc/testfiles/mod_h5clear_mdc_image.h5 Binary files differnew file mode 100644 index 0000000..310134b --- /dev/null +++ b/tools/test/misc/testfiles/mod_h5clear_mdc_image.h5 diff --git a/tools/test/misc/testh5clear.sh.in b/tools/test/misc/testh5clear.sh.in index a31b824..b855572 100644 --- a/tools/test/misc/testh5clear.sh.in +++ b/tools/test/misc/testh5clear.sh.in @@ -75,6 +75,7 @@ $SRC_H5CLEAR_TESTFILES/h5clear_log_v3.h5 $SRC_H5CLEAR_TESTFILES/latest_h5clear_log_v3.h5 $SRC_H5CLEAR_TESTFILES/latest_h5clear_sec2_v3.h5 $SRC_H5CLEAR_TESTFILES/h5clear_mdc_image.h5 +$SRC_H5CLEAR_TESTFILES/mod_h5clear_mdc_image.h5 " COPY_TESTFILES_TO_TESTDIR() @@ -124,8 +125,8 @@ CLEAN_TESTFILES_AND_TESTDIR() # beginning with the word "Testing". # TESTING() { - SPACES=" " - echo "Testing $* $SPACES" | cut -c1-74 | tr -d '\012' + SPACES=" " + echo "Testing $* $SPACES" | cut -c1-70 | tr -d '\012' } # $1 is the expected output @@ -164,6 +165,7 @@ TOOLTEST_OUT() { # Run test. TESTING $H5CLEAR $option1 $option2 $fname ( + cd $TESTDIR $RUNSERIAL $H5CLEAR_BIN $option1 $option2 $fname ) >$actual 2>$actual_err cp $actual $actual_sav @@ -184,7 +186,10 @@ TOOLTEST_OUT() { OPEN_CHK() { fname=$1 expected=$2 - $OPENCHK_BIN $fname 2>/dev/null + ( + cd $TESTDIR + $OPENCHK_BIN $fname 2>/dev/null + ) actual=$? if test $actual -ne $expected; then echo "Unexpected return from $OPENCHK" @@ -204,9 +209,11 @@ TOOLTEST() { ret_expected=$4 # TESTING $H5CLEAR $option1 $option2 $fname - fname=$1 # h5clear $option1 $option2 $fname - $RUNSERIAL $H5CLEAR_BIN $option1 $option2 $fname 2>/dev/null 1>/dev/null + ( + cd $TESTDIR + $RUNSERIAL $H5CLEAR_BIN $option1 $option2 $fname 2>/dev/null 1>/dev/null + ) if test $? -ne $ret_expected; then echo "*FAILED*" nerrors=`expr $nerrors + 1` @@ -222,92 +229,95 @@ TOOLTEST() { ############################################################################## # prepare for testing COPY_TESTFILES_TO_TESTDIR +# For Cmake +$CP -f $TESTDIR/h5clear_sec2_v0.h5 $TESTDIR/orig_h5clear_sec2_v0.h5 +$CP -f $TESTDIR/h5clear_sec2_v2.h5 $TESTDIR/orig_h5clear_sec2_v2.h5 +$CP -f $TESTDIR/h5clear_sec2_v3.h5 $TESTDIR/orig_h5clear_sec2_v3.h5 # # # # The following are tests to verify the expected output from h5clear # "h5clear -h" -# "h5clear" (no options, no file) -# "h5clear junk.h5" (no options, nonexisting file) -# "h5clear h5clear_sec2_v3.h5" (no options, existing file) -# "h5clear -m" (valid 1 option, no file) -# "h5clear -s junk.h5" (valid 1 option, nonexisting file) -# "h5clear -m -s" (valid 2 options, no file) -# "h5clear -m -s junk.h5" (valid 2 options, nonexisting file) -# "h5clear -m h5clear_sec2_v2.h5" (valid 1 option, existing file, no cache image) -# "h5clear -s -m h5clear_sec2_v0.h5" (valid 2 options, existing file, no cache image) +# "h5clear" (no options, no file) +# "h5clear junk.h5" (no options, nonexisting file) +# "h5clear orig_h5clear_sec2_v3.h5" (no options, existing file) +# "h5clear -m" (valid 1 option, no file) +# "h5clear -s junk.h5" (valid 1 option, nonexisting file) +# "h5clear -m -s" (valid 2 options, no file) +# "h5clear -m -s junk.h5" (valid 2 options, nonexisting file) +# "h5clear -m orig_h5clear_sec2_v2.h5" (valid 1 option, existing file, no cache image) +# "h5clear -s -m orig_h5clear_sec2_v0.h5" (valid 2 options, existing file, no cache image) TOOLTEST_OUT "" -h "" h5clear_usage.ddl TOOLTEST_OUT "" "" "" h5clear_usage.ddl TOOLTEST_OUT junk.h5 "" "" h5clear_usage.ddl -TOOLTEST_OUT $TESTDIR/h5clear_sec2_v3.h5 "" "" h5clear_usage.ddl +TOOLTEST_OUT orig_h5clear_sec2_v3.h5 "" "" h5clear_usage.ddl TOOLTEST_OUT "" -m "" h5clear_missing_file.ddl TOOLTEST_OUT junk.h5 -s "" h5clear_open_fail.ddl TOOLTEST_OUT "" -m -s h5clear_missing_file.ddl TOOLTEST_OUT junk.h5 -m -s h5clear_open_fail.ddl -TOOLTEST_OUT $TESTDIR/h5clear_sec2_v2.h5 -m "" h5clear_no_mdc_image.ddl -TOOLTEST_OUT $TESTDIR/h5clear_sec2_v0.h5 -s -m h5clear_no_mdc_image.ddl +TOOLTEST_OUT orig_h5clear_sec2_v2.h5 -m "" h5clear_no_mdc_image.ddl +TOOLTEST_OUT orig_h5clear_sec2_v0.h5 -s -m h5clear_no_mdc_image.ddl # # # # The following are tests to verify the expected exit code from h5clear: +# "h5clear -m h5clear_mdc_image.h5" (valid option, existing file, succeed exit code) +# "h5clear --vers" (valid option, version #, succeed exit code) # "h5clear -k" (invalid 1 option, no file, fail exit code) # "h5clear -k junk.h5" (invalid 1 option, nonexisting file, fail exit code) # "h5clear -l h5clear_sec2_v2.h5" (invalid 1 option, existing file, fail exit code) # "h5clear -m -k" (valid/invalid 2 options, nofile, fail exit code) # "h5clear -l -m" (invalid/valid 2 options, nofile, fail exit code) -# "h5clear -m -k junk.h5" (valid/invalid 2 options, nonexisting file, fail exit code) +# "h5clear -m -l junk.h5" (valid/invalid 2 options, nonexisting file, fail exit code) # "h5clear -l -m junk.h5" (invalid/valid 2 options, nonexisting file, fail exit code) -# "h5clear -m -k h5clear_sec2_v0.h5" (valid/invalid 2 options, existing file, fail exit code) +# "h5clear -m -l h5clear_sec2_v0.h5" (valid/invalid 2 options, existing file, fail exit code) # "h5clear -l -m h5clear_sec2_v0.h5" (invalid/valid 2 options, existing file, fail exit code) +TOOLTEST h5clear_mdc_image.h5 -m "" $SUCCEED +TOOLTEST "" --vers "" $SUCCEED TOOLTEST "" -k "" $FAIL TOOLTEST junk.h5 -k "" $FAIL TOOLTEST h5clear_sec2_v2.h5 -l "" $FAIL TOOLTEST "" -m -k $FAIL TOOLTEST "" -l -m $FAIL -TOOLTEST junk.h5 -m -k $FAIL +TOOLTEST junk.h5 -m -l $FAIL TOOLTEST junk.h5 -l -m $FAIL -TOOLTEST $TESTDIR/h5clear_sec2_v0.h5 -m -k $FAIL -TOOLTEST $TESTDIR/h5clear_sec2_v0.h5 -l -m $FAIL -# -# "h5clear --vers" (valid option, version #, succeed exit code) -# "h5clear -m h5clear_mdc_image.h5" (valid option, existing file, succeed exit code) -TOOLTEST "" --vers "" $SUCCEED -TOOLTEST $TESTDIR/h5clear_mdc_image.h5 -m "" $SUCCEED +TOOLTEST h5clear_sec2_v0.h5 -m -l $FAIL +TOOLTEST h5clear_sec2_v0.h5 -l -m $FAIL # # # # h5clear_mdc_image.h5 already has cache image removed earlier, verify the expected warning from h5clear: -TOOLTEST_OUT $TESTDIR/h5clear_mdc_image.h5 -m "" h5clear_no_mdc_image.ddl -TOOLTEST_OUT $TESTDIR/h5clear_mdc_image.h5 -s -m h5clear_no_mdc_image.ddl +TOOLTEST_OUT mod_h5clear_mdc_image.h5 -m "" h5clear_no_mdc_image.ddl +TOOLTEST_OUT mod_h5clear_mdc_image.h5 -s -m h5clear_no_mdc_image.ddl # # # # The following are tests to verify the status_flags field is cleared properly: -OPEN_CHK $TESTDIR/h5clear_sec2_v3.h5 $FAIL -TOOLTEST $TESTDIR/h5clear_sec2_v3.h5 -s "" $SUCCEED -OPEN_CHK $TESTDIR/h5clear_sec2_v3.h5 $SUCCEED +OPEN_CHK h5clear_sec2_v3.h5 $FAIL +TOOLTEST h5clear_sec2_v3.h5 -s "" $SUCCEED +OPEN_CHK h5clear_sec2_v3.h5 $SUCCEED # -OPEN_CHK $TESTDIR/h5clear_log_v3.h5 $FAIL -TOOLTEST $TESTDIR/h5clear_log_v3.h5 -s "" $SUCCEED -OPEN_CHK $TESTDIR/h5clear_log_v3.h5 $SUCCEED +OPEN_CHK h5clear_log_v3.h5 $FAIL +TOOLTEST h5clear_log_v3.h5 -s "" $SUCCEED +OPEN_CHK h5clear_log_v3.h5 $SUCCEED # -OPEN_CHK $TESTDIR/latest_h5clear_sec2_v3.h5 $FAIL -TOOLTEST $TESTDIR/latest_h5clear_sec2_v3.h5 -s "" $SUCCEED -OPEN_CHK $TESTDIR/latest_h5clear_sec2_v3.h5 $SUCCEED +OPEN_CHK latest_h5clear_sec2_v3.h5 $FAIL +TOOLTEST latest_h5clear_sec2_v3.h5 -s "" $SUCCEED +OPEN_CHK latest_h5clear_sec2_v3.h5 $SUCCEED # -OPEN_CHK $TESTDIR/latest_h5clear_log_v3.h5 $FAIL -TOOLTEST $TESTDIR/latest_h5clear_log_v3.h5 -s "" $SUCCEED -OPEN_CHK $TESTDIR/latest_h5clear_log_v3.h5 $SUCCEED +OPEN_CHK latest_h5clear_log_v3.h5 $FAIL +TOOLTEST latest_h5clear_log_v3.h5 -s "" $SUCCEED +OPEN_CHK latest_h5clear_log_v3.h5 $SUCCEED # # File open succeeds for the following 2 test files because the # library does not check status_flags for files with < v3 superblock: -OPEN_CHK $TESTDIR/h5clear_sec2_v0.h5 $SUCCEED -TOOLTEST $TESTDIR/h5clear_sec2_v0.h5 -s "" $SUCCEED -OPEN_CHK $TESTDIR/h5clear_sec2_v0.h5 $SUCCEED +OPEN_CHK h5clear_sec2_v0.h5 $SUCCEED +TOOLTEST h5clear_sec2_v0.h5 -s "" $SUCCEED +OPEN_CHK h5clear_sec2_v0.h5 $SUCCEED # -OPEN_CHK $TESTDIR/h5clear_sec2_v2.h5 $SUCCEED -TOOLTEST $TESTDIR/h5clear_sec2_v2.h5 -s "" $SUCCEED -OPEN_CHK $TESTDIR/h5clear_sec2_v2.h5 $SUCCEED +OPEN_CHK h5clear_sec2_v2.h5 $SUCCEED +TOOLTEST h5clear_sec2_v2.h5 -s "" $SUCCEED +OPEN_CHK h5clear_sec2_v2.h5 $SUCCEED # # # |