diff options
Diffstat (limited to 'tools')
46 files changed, 414 insertions, 421 deletions
diff --git a/tools/Makefile.in b/tools/Makefile.in index f497875..70e11ae 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -73,7 +73,7 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ TESTS = subdir = tools ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -144,7 +144,7 @@ am__relativize = \ dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -162,12 +162,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -441,6 +438,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -805,7 +806,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -831,7 +832,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -855,7 +856,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -865,7 +866,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -955,7 +956,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -985,7 +986,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5copy/CMakeLists.txt b/tools/h5copy/CMakeLists.txt index 94eb732..95341a2 100644 --- a/tools/h5copy/CMakeLists.txt +++ b/tools/h5copy/CMakeLists.txt @@ -375,7 +375,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5copy ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5copy ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5copy/Makefile.am b/tools/h5copy/Makefile.am index dd0c5c3..47e8685 100644 --- a/tools/h5copy/Makefile.am +++ b/tools/h5copy/Makefile.am @@ -25,7 +25,8 @@ INCLUDES=-I$(top_srcdir)/src -I$(top_srcdir)/tools/lib # Test programs and scripts TEST_PROG=h5copygentest -TEST_SCRIPT=$(srcdir)/testh5copy.sh +TEST_SCRIPT=testh5copy.sh + check_SCRIPTS=$(TEST_SCRIPT) SCRIPT_DEPEND=h5copy$(EXEEXT) diff --git a/tools/h5copy/Makefile.in b/tools/h5copy/Makefile.in index cd4b085..da9d0b7 100644 --- a/tools/h5copy/Makefile.in +++ b/tools/h5copy/Makefile.in @@ -68,20 +68,21 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/bin/depcomp $(top_srcdir)/bin/mkinstalldirs \ + $(srcdir)/testh5copy.sh.in $(top_srcdir)/bin/depcomp \ + $(top_srcdir)/bin/mkinstalldirs \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am bin_PROGRAMS = h5copy$(EXEEXT) check_PROGRAMS = $(am__EXEEXT_1) -TESTS = $(check_PROGRAMS) $(check_SCRIPTS) +TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) subdir = tools/h5copy ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h -CONFIG_CLEAN_FILES = +CONFIG_CLEAN_FILES = testh5copy.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" am__EXEEXT_1 = h5copygentest$(EXEEXT) @@ -149,7 +150,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -167,12 +168,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -439,7 +437,7 @@ INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib # Test programs and scripts TEST_PROG = h5copygentest -TEST_SCRIPT = $(srcdir)/testh5copy.sh +TEST_SCRIPT = testh5copy.sh check_SCRIPTS = $(TEST_SCRIPT) SCRIPT_DEPEND = h5copy$(EXEEXT) @@ -463,6 +461,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -502,6 +504,8 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): +testh5copy.sh: $(top_builddir)/config.status $(srcdir)/testh5copy.sh.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ @@ -839,7 +843,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -865,7 +869,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -889,7 +893,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -899,7 +903,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -989,7 +993,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1019,7 +1023,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5copy/testh5copy.sh b/tools/h5copy/testh5copy.sh.in index 9b4fcff..c7acd9a 100644 --- a/tools/h5copy/testh5copy.sh +++ b/tools/h5copy/testh5copy.sh.in @@ -19,10 +19,7 @@ # Thursday, July 20, 2006 # -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi +srcdir=@srcdir@ # source dirs SRC_TOOLS="$srcdir/.." @@ -148,7 +145,7 @@ TESTING() VERIFY() { SPACES=" " - echo "Verifying h5diff output `basename $1` `basename $2` `basename $3` `basename $4` $SPACES" | cut -c1-70 | tr -d '\012' + echo "Verifying h5diff output $* $SPACES" | cut -c1-70 | tr -d '\012' } # Print a line-line message left justified in a field of 70 characters @@ -198,7 +195,7 @@ TOOLTEST() runh5diff=no fi - TESTING $H5COPY $5 $6 $7 $8 $9 + TESTING $H5COPY $@ ( echo "#############################" echo " output for '$H5COPY $@'" @@ -268,7 +265,7 @@ TOOLTEST_FAIL() outputfile=$4 fi - TESTING $H5COPY $5 $6 $7 $8 $9 + TESTING $H5COPY $@ ( #echo "#############################" #echo " output for '$H5COPY $@'" @@ -550,8 +547,6 @@ COPY_REFERENCES COPY_EXT_LINKS TEST_MISC -# Add newline for nicer formatting -echo " " if test $nerrors -eq 0 ; then echo "All $TESTNAME tests passed." diff --git a/tools/h5diff/CMakeLists.txt b/tools/h5diff/CMakeLists.txt index 903564f..994a6f2 100644 --- a/tools/h5diff/CMakeLists.txt +++ b/tools/h5diff/CMakeLists.txt @@ -1436,7 +1436,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5diff ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5diff ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS @@ -1449,7 +1449,7 @@ INSTALL ( IF (H5_HAVE_PARALLEL) - INSTALL_PROGRAM_PDB (ph5diff ${HDF5_INSTALL_BIN_DIR} toolsapplications) + #INSTALL_PROGRAM_PDB (ph5diff ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5diff/Makefile.am b/tools/h5diff/Makefile.am index 0b8816f..190c083 100644 --- a/tools/h5diff/Makefile.am +++ b/tools/h5diff/Makefile.am @@ -27,7 +27,7 @@ INCLUDES=-I$(top_srcdir)/src -I$(top_srcdir)/tools/lib # is enabled. if BUILD_PARALLEL_CONDITIONAL H5PDIFF=ph5diff - TEST_SCRIPT_PARA=$(srcdir)/testph5diff.sh + TEST_SCRIPT_PARA=testph5diff.sh endif # Our main target, h5diff @@ -38,7 +38,7 @@ h5diff_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS) # Test programs and scripts TEST_PROG=h5diffgentest -TEST_SCRIPT=$(srcdir)/testh5diff.sh +TEST_SCRIPT=testh5diff.sh check_PROGRAMS=$(TEST_PROG) check_SCRIPTS=$(TEST_SCRIPT) $(TEST_SCRIPT_PARA) diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in index 66d2c90..4676341 100644 --- a/tools/h5diff/Makefile.in +++ b/tools/h5diff/Makefile.in @@ -68,20 +68,21 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(srcdir)/testh5diff.sh.in $(srcdir)/testph5diff.sh.in \ $(top_srcdir)/bin/depcomp $(top_srcdir)/bin/mkinstalldirs \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am bin_PROGRAMS = h5diff$(EXEEXT) $(am__EXEEXT_1) check_PROGRAMS = $(am__EXEEXT_2) -TESTS = $(check_PROGRAMS) $(check_SCRIPTS) +TESTS = $(am__EXEEXT_2) $(TEST_SCRIPT) subdir = tools/h5diff ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h -CONFIG_CLEAN_FILES = +CONFIG_CLEAN_FILES = testh5diff.sh testph5diff.sh CONFIG_CLEAN_VPATH_FILES = @BUILD_PARALLEL_CONDITIONAL_TRUE@am__EXEEXT_1 = ph5diff$(EXEEXT) am__installdirs = "$(DESTDIR)$(bindir)" @@ -156,7 +157,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -174,12 +175,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -448,14 +446,14 @@ INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib # Always build and test h5diff but build and test ph5diff only if parallel # is enabled. @BUILD_PARALLEL_CONDITIONAL_TRUE@H5PDIFF = ph5diff -@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_SCRIPT_PARA = $(srcdir)/testph5diff.sh +@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_SCRIPT_PARA = testph5diff.sh # Add h5diff specific linker flags here h5diff_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS) # Test programs and scripts TEST_PROG = h5diffgentest -TEST_SCRIPT = $(srcdir)/testh5diff.sh +TEST_SCRIPT = testh5diff.sh check_SCRIPTS = $(TEST_SCRIPT) $(TEST_SCRIPT_PARA) # The parallel test script testph5diff.sh actually depends on testh5diff.sh. SCRIPT_DEPEND = h5diff$(EXEEXT) $(H5PDIFF) $(srcdir)/testh5diff.sh @@ -479,6 +477,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -518,6 +520,10 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): +testh5diff.sh: $(top_builddir)/config.status $(srcdir)/testh5diff.sh.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +testph5diff.sh: $(top_builddir)/config.status $(srcdir)/testph5diff.sh.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ @@ -860,7 +866,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -886,7 +892,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -910,7 +916,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -920,7 +926,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1010,7 +1016,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1040,7 +1046,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5diff/testh5diff.sh b/tools/h5diff/testh5diff.sh.in index 02dacd8..3455287 100755..100644 --- a/tools/h5diff/testh5diff.sh +++ b/tools/h5diff/testh5diff.sh.in @@ -29,7 +29,7 @@ # Added test 400 - 425 (links with --follow-symlinks option) # Added test 450 - 459 (dangling links) - +srcdir=@srcdir@ TESTNAME=h5diff EXIT_SUCCESS=0 @@ -51,11 +51,6 @@ h5haveexitcode=yes # default is yes pmode= # default to run h5diff tests mydomainname=`domainname 2>/dev/null` -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi - # source dirs SRC_TOOLS="$srcdir/.." SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" @@ -100,8 +95,6 @@ $SRC_H5DIFF_TESTFILES/h5diff_extlink_src.h5 $SRC_H5DIFF_TESTFILES/h5diff_extlink_trg.h5 $SRC_H5DIFF_TESTFILES/h5diff_ext2softlink_src.h5 $SRC_H5DIFF_TESTFILES/h5diff_ext2softlink_trg.h5 -$SRC_H5DIFF_TESTFILES/h5diff_dset_idx1.h5 -$SRC_H5DIFF_TESTFILES/h5diff_dset_idx2.h5 $SRC_H5DIFF_TESTFILES/h5diff_dset_zero_dim_size1.h5 $SRC_H5DIFF_TESTFILES/h5diff_dset_zero_dim_size2.h5 $SRC_H5DIFF_TESTFILES/h5diff_danglelinks1.h5 @@ -938,12 +931,6 @@ TOOLTEST h5diff_424.txt --follow-symlinks -v h5diff_ext2softlink_trg.h5 h5diff_e # extlink_to_softlink_to_dset1 vs extlink_to_softlink_to_dset2" TOOLTEST h5diff_425.txt --follow-symlinks -v h5diff_ext2softlink_src.h5 h5diff_ext2softlink_src.h5 /ext_link_to_slink1 /ext_link_to_slink2 -# ############################################################################## -# 19. The comparision for the two datasets between the 2 files should be the same -# FILE19: B-tree indexing is used for the datasets -# FILE20: Fixed Array indexing is used for the datasets -# ############################################################################## -TOOLTEST h5diff_idx.txt -v $FILE19 $FILE20 # ############################################################################## # # Dangling links compare (--follow-symlinks and --no-dangling-links) diff --git a/tools/h5diff/testph5diff.sh b/tools/h5diff/testph5diff.sh.in index c619ab5..ca212a1 100755..100644 --- a/tools/h5diff/testph5diff.sh +++ b/tools/h5diff/testph5diff.sh.in @@ -14,16 +14,13 @@ # access to either file, you may request a copy from help@hdfgroup.org. # -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi +srcdir=@srcdir@ TESTNAME=ph5diff EXIT_SUCCESS=0 EXIT_FAILURE=1 -TOOL=${srcdir}/testh5diff.sh +TOOL=testh5diff.sh nerrors=0 diff --git a/tools/h5dump/CMakeLists.txt b/tools/h5dump/CMakeLists.txt index 302f854..16e3b53 100644 --- a/tools/h5dump/CMakeLists.txt +++ b/tools/h5dump/CMakeLists.txt @@ -1899,7 +1899,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5dump ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5dump ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in index 57e30b0..6b4a6e6 100644 --- a/tools/h5dump/Makefile.in +++ b/tools/h5dump/Makefile.in @@ -75,10 +75,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/config/conclude.am check_PROGRAMS = $(am__EXEEXT_1) binread$(EXEEXT) bin_PROGRAMS = h5dump$(EXEEXT) -TESTS = $(check_PROGRAMS) $(check_SCRIPTS) +TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) subdir = tools/h5dump ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -156,7 +156,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -174,12 +174,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -471,6 +468,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -860,7 +861,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -886,7 +887,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -910,7 +911,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -920,7 +921,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1010,7 +1011,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1040,7 +1041,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5dump/h5dump.c b/tools/h5dump/h5dump.c index 23fd1d9..2921fb9 100644 --- a/tools/h5dump/h5dump.c +++ b/tools/h5dump/h5dump.c @@ -233,23 +233,23 @@ usage(const char *prog) HDfflush(rawoutstream); HDfprintf(rawoutstream, "usage: %s [OPTIONS] files\n", prog); HDfprintf(rawoutstream, " OPTIONS\n"); - HDfprintf(rawoutstream, " -h, --help Print a usage message and exit\n"); - HDfprintf(rawoutstream, " -n, --contents Print a list of the file contents and exit\n"); + HDfprintf(rawoutstream, " -h, --help Print a usage message and exit\n"); + HDfprintf(rawoutstream, " -n, --contents Print a list of the file contents and exit\n"); HDfprintf(rawoutstream, " Optional value 1 also prints attributes.\n"); - HDfprintf(rawoutstream, " -B, --superblock Print the content of the super block\n"); - HDfprintf(rawoutstream, " -H, --header Print the header only; no data is displayed\n"); - HDfprintf(rawoutstream, " -A, --onlyattr Print the header and value of attributes\n"); - HDfprintf(rawoutstream, " -i, --object-ids Print the object ids\n"); - HDfprintf(rawoutstream, " -r, --string Print 1-byte integer datasets as ASCII\n"); - HDfprintf(rawoutstream, " -e, --escape Escape non printing characters\n"); - HDfprintf(rawoutstream, " -V, --version Print version number and exit\n"); + HDfprintf(rawoutstream, " -B, --superblock Print the content of the super block\n"); + HDfprintf(rawoutstream, " -H, --header Print the header only; no data is displayed\n"); + HDfprintf(rawoutstream, " -A, --onlyattr Print the header and value of attributes\n"); + HDfprintf(rawoutstream, " -i, --object-ids Print the object ids\n"); + HDfprintf(rawoutstream, " -r, --string Print 1-byte integer datasets as ASCII\n"); + HDfprintf(rawoutstream, " -e, --escape Escape non printing characters\n"); + HDfprintf(rawoutstream, " -V, --version Print version number and exit\n"); HDfprintf(rawoutstream, " -a P, --attribute=P Print the specified attribute\n"); HDfprintf(rawoutstream, " If an attribute name contains a slash (/), escape the\n"); HDfprintf(rawoutstream, " slash with a preceding backslash (\\).\n"); HDfprintf(rawoutstream, " (See example section below.)\n"); HDfprintf(rawoutstream, " -d P, --dataset=P Print the specified dataset\n"); - HDfprintf(rawoutstream, " -y, --noindex Do not print array indices with the data\n"); - HDfprintf(rawoutstream, " -p, --properties Print dataset filters, storage layout and fill value\n"); + HDfprintf(rawoutstream, " -y, --noindex Do not print array indices with the data\n"); + HDfprintf(rawoutstream, " -p, --properties Print dataset filters, storage layout and fill value\n"); HDfprintf(rawoutstream, " -f D, --filedriver=D Specify which driver to open the file with\n"); HDfprintf(rawoutstream, " -g P, --group=P Print the specified group and all members\n"); HDfprintf(rawoutstream, " -l P, --soft-link=P Print the value(s) of the specified soft link\n"); @@ -270,17 +270,17 @@ usage(const char *prog) " the data value and length is the number of bits of\n" " the mask.\n" ); - HDfprintf(rawoutstream, " -R, --region Print dataset pointed by region references\n"); - HDfprintf(rawoutstream, " -x, --xml Output in XML using Schema\n"); - HDfprintf(rawoutstream, " -u, --use-dtd Output in XML using DTD\n"); + HDfprintf(rawoutstream, " -R, --region Print dataset pointed by region references\n"); + HDfprintf(rawoutstream, " -x, --xml Output in XML using Schema\n"); + HDfprintf(rawoutstream, " -u, --use-dtd Output in XML using DTD\n"); HDfprintf(rawoutstream, " -D U, --xml-dtd=U Use the DTD or schema at U\n"); - HDfprintf(rawoutstream, " -X S, --xml-ns=S (XML Schema) Use qualified names n the XML\n"); + HDfprintf(rawoutstream, " -X S, --xml-ns=S (XML Schema) Use qualified names n the XML\n"); HDfprintf(rawoutstream, " \":\": no namespace, default: \"hdf5:\"\n"); HDfprintf(rawoutstream, " E.g., to dump a file called `-f', use h5dump -- -f\n"); HDfprintf(rawoutstream, " --enable-error-stack Prints messages from the HDF5 error stack as they\n"); HDfprintf(rawoutstream, " occur.\n"); HDfprintf(rawoutstream, " --no-compact-subset Disable compact form of subsetting and allow the use\n"); - HDfprintf(rawoutstream, " of \"[\" in datset names.\n"); + HDfprintf(rawoutstream, " of \"[\" in dataset names.\n"); HDfprintf(rawoutstream, "\n"); HDfprintf(rawoutstream, " Subsetting is available by using the following options with a dataset\n"); HDfprintf(rawoutstream, " attribute. Subsetting is done by selecting a hyperslab from the data.\n"); @@ -294,7 +294,8 @@ usage(const char *prog) HDfprintf(rawoutstream, " -c COUNT, --count=COUNT Number of blocks to include in selection\n"); HDfprintf(rawoutstream, " -k BLOCK, --block=BLOCK Size of block in hyperslab\n"); HDfprintf(rawoutstream, " START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the\n"); - HDfprintf(rawoutstream, " number of dimensions in the dataspace being queried\n"); + HDfprintf(rawoutstream, " number of dimensions in the dataspace being queried\n"); + HDfprintf(rawoutstream, " (Alternate compact form of subsetting is described in the Reference Manual)\n"); HDfprintf(rawoutstream, "\n"); HDfprintf(rawoutstream, " D - is the file driver to use in opening the file. Acceptable values\n"); HDfprintf(rawoutstream, " are \"sec2\", \"family\", \"split\", \"multi\", \"direct\", and \"stream\". Without\n"); diff --git a/tools/h5dump/testh5dump.sh.in b/tools/h5dump/testh5dump.sh.in index f969876..2373f6f 100644 --- a/tools/h5dump/testh5dump.sh.in +++ b/tools/h5dump/testh5dump.sh.in @@ -15,6 +15,8 @@ # # Tests for the h5dump tool +srcdir=@srcdir@ + TESTNAME=h5dump EXIT_SUCCESS=0 EXIT_FAILURE=1 @@ -39,10 +41,6 @@ AWK='awk' nerrors=0 verbose=yes -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi # source dirs SRC_TOOLS="$srcdir/../" diff --git a/tools/h5dump/testh5dumppbits.sh.in b/tools/h5dump/testh5dumppbits.sh.in index 3d9685c..a390766 100644 --- a/tools/h5dump/testh5dumppbits.sh.in +++ b/tools/h5dump/testh5dumppbits.sh.in @@ -15,6 +15,8 @@ # # Tests for the h5dump tool with packed bits type files +srcdir=@srcdir@ + # Determine which filters are available USE_FILTER_SZIP="@USE_FILTER_SZIP@" USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" @@ -47,10 +49,6 @@ AWK='awk' nerrors=0 verbose=yes -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi # source dirs SRC_TOOLS="$srcdir/../" @@ -80,6 +78,8 @@ test -d $TESTDIR || mkdir $TESTDIR # -------------------------------------------------------------------- LIST_HDF5_TEST_FILES=" $SRC_H5DUMP_TESTFILES/packedbits.h5 +$SRC_H5DUMP_TESTFILES/tarray1.h5 +$SRC_H5DUMP_TESTFILES/tcompound.h5 " LIST_OTHER_TEST_FILES=" diff --git a/tools/h5dump/testh5dumpxml.sh.in b/tools/h5dump/testh5dumpxml.sh.in index 1a6b2b1..374f504 100644 --- a/tools/h5dump/testh5dumpxml.sh.in +++ b/tools/h5dump/testh5dumpxml.sh.in @@ -15,6 +15,8 @@ # # Tests for the h5dump tool +srcdir=@srcdir@ + TESTNAME=h5dumpxml EXIT_SUCCESS=0 EXIT_FAILURE=1 @@ -34,10 +36,6 @@ AWK='awk' nerrors=0 verbose=yes -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi # source dirs SRC_TOOLS="$srcdir/../" diff --git a/tools/h5import/CMakeLists.txt b/tools/h5import/CMakeLists.txt index 4e320a1..bc47244 100644 --- a/tools/h5import/CMakeLists.txt +++ b/tools/h5import/CMakeLists.txt @@ -381,7 +381,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5import ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5import ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5import/Makefile.am b/tools/h5import/Makefile.am index 49f4f71..167dbc9 100644 --- a/tools/h5import/Makefile.am +++ b/tools/h5import/Makefile.am @@ -25,7 +25,7 @@ INCLUDES=-I$(top_srcdir)/src -I$(top_srcdir)/tools/lib # Test programs and scripts TEST_PROG=h5importtest -TEST_SCRIPT=$(srcdir)/h5importtestutil.sh +TEST_SCRIPT=h5importtestutil.sh check_PROGRAMS=$(TEST_PROG) check_SCRIPT=h5importtestutil.sh diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in index 3376706..16e8901 100644 --- a/tools/h5import/Makefile.in +++ b/tools/h5import/Makefile.in @@ -68,20 +68,21 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(top_srcdir)/bin/depcomp $(top_srcdir)/bin/mkinstalldirs \ + $(srcdir)/h5importtestutil.sh.in $(top_srcdir)/bin/depcomp \ + $(top_srcdir)/bin/mkinstalldirs \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am check_PROGRAMS = $(am__EXEEXT_1) bin_PROGRAMS = h5import$(EXEEXT) -TESTS = $(check_PROGRAMS) +TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) subdir = tools/h5import ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h -CONFIG_CLEAN_FILES = +CONFIG_CLEAN_FILES = h5importtestutil.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" am__EXEEXT_1 = h5importtest$(EXEEXT) @@ -149,7 +150,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -167,12 +168,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -436,7 +434,7 @@ INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib # Test programs and scripts TEST_PROG = h5importtest -TEST_SCRIPT = $(srcdir)/h5importtestutil.sh +TEST_SCRIPT = h5importtestutil.sh check_SCRIPT = h5importtestutil.sh SCRIPT_DEPEND = h5import$(EXEEXT) @@ -457,6 +455,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -496,6 +498,8 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): +h5importtestutil.sh: $(top_builddir)/config.status $(srcdir)/h5importtestutil.sh.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ @@ -833,7 +837,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -859,7 +863,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -883,7 +887,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -893,7 +897,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -983,7 +987,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1013,7 +1017,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5import/h5importtestutil.sh b/tools/h5import/h5importtestutil.sh.in index 4831f71..ba0743b 100755..100644 --- a/tools/h5import/h5importtestutil.sh +++ b/tools/h5import/h5importtestutil.sh.in @@ -16,6 +16,8 @@ # HDF Utilities Test script # Usage: h5importtestutil.sh [machine-type] +srcdir=@srcdir@ + # Determine which filters are available USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" @@ -31,11 +33,6 @@ AWK='awk' # initialize errors variable nerrors=0 -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi - # source dirs SRC_TOOLS="$srcdir/.." SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" diff --git a/tools/h5jam/CMakeLists.txt b/tools/h5jam/CMakeLists.txt index d0bf30f..b44e734 100644 --- a/tools/h5jam/CMakeLists.txt +++ b/tools/h5jam/CMakeLists.txt @@ -535,7 +535,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5jam ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5jam ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in index aeb116d..ff8b089 100644 --- a/tools/h5jam/Makefile.in +++ b/tools/h5jam/Makefile.in @@ -74,10 +74,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/config/conclude.am bin_PROGRAMS = h5jam$(EXEEXT) h5unjam$(EXEEXT) check_PROGRAMS = tellub$(EXEEXT) h5jamgentest$(EXEEXT) getub$(EXEEXT) -TESTS = $(check_PROGRAMS) $(check_SCRIPTS) +TESTS = $(TEST_SCRIPT) subdir = tools/h5jam ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -164,7 +164,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -182,12 +182,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -474,6 +471,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -865,7 +866,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -891,7 +892,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -915,7 +916,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -925,7 +926,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1015,7 +1016,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1045,7 +1046,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5jam/testh5jam.sh.in b/tools/h5jam/testh5jam.sh.in index 29e02bd..b2c6bec 100644 --- a/tools/h5jam/testh5jam.sh.in +++ b/tools/h5jam/testh5jam.sh.in @@ -15,6 +15,8 @@ # # Tests for the h5jam/h5unjam tools +srcdir=@srcdir@ + # Determine which filters are available USE_FILTER_SZIP="@USE_FILTER_SZIP@" USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" @@ -43,11 +45,6 @@ AWK='awk' nerrors=0 verbose=yes -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi - # source dirs SRC_TOOLS="$srcdir/.." SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" diff --git a/tools/h5ls/CMakeLists.txt b/tools/h5ls/CMakeLists.txt index 81a6787..e2b3285 100644 --- a/tools/h5ls/CMakeLists.txt +++ b/tools/h5ls/CMakeLists.txt @@ -434,7 +434,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5ls ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5ls ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in index 673b625..7aa4329 100644 --- a/tools/h5ls/Makefile.in +++ b/tools/h5ls/Makefile.in @@ -73,10 +73,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am bin_PROGRAMS = h5ls$(EXEEXT) -TESTS = $(check_SCRIPTS) +TESTS = $(TEST_SCRIPT) subdir = tools/h5ls ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -144,7 +144,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -162,12 +162,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -451,6 +448,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -815,7 +816,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -841,7 +842,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -865,7 +866,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -875,7 +876,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -965,7 +966,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -995,7 +996,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5ls/testh5ls.sh.in b/tools/h5ls/testh5ls.sh.in index c0667f5..f941567 100644 --- a/tools/h5ls/testh5ls.sh.in +++ b/tools/h5ls/testh5ls.sh.in @@ -15,6 +15,8 @@ # # Tests for the h5ls tool +srcdir=@srcdir@ + TESTNAME=h5ls EXIT_SUCCESS=0 EXIT_FAILURE=1 @@ -35,13 +37,11 @@ WORDS_BIGENDIAN="@WORDS_BIGENDIAN@" nerrors=0 verbose=yes h5haveexitcode=yes # default is yes -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi + # source dirs SRC_TOOLS="$srcdir/.." SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" + # testfiles source dirs for tools SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES" SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES" diff --git a/tools/h5repack/CMakeLists.txt b/tools/h5repack/CMakeLists.txt index 936559e..3ee1cba 100644 --- a/tools/h5repack/CMakeLists.txt +++ b/tools/h5repack/CMakeLists.txt @@ -899,7 +899,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5repack ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5repack ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in index 01b6a6a..389339f 100644 --- a/tools/h5repack/Makefile.in +++ b/tools/h5repack/Makefile.in @@ -75,10 +75,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ noinst_PROGRAMS = testh5repack_detect_szip$(EXEEXT) check_PROGRAMS = $(am__EXEEXT_1) bin_PROGRAMS = h5repack$(EXEEXT) -TESTS = $(check_PROGRAMS) $(check_SCRIPTS) +TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) subdir = tools/h5repack ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -164,7 +164,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -182,12 +182,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -485,6 +482,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -888,7 +889,7 @@ h5repack.sh.chkexe_: h5repacktst.chkexe_ # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -914,7 +915,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -938,7 +939,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -948,7 +949,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1038,7 +1039,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1068,7 +1069,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5repack/h5repack.sh.in b/tools/h5repack/h5repack.sh.in index b702152..2614dd6 100644 --- a/tools/h5repack/h5repack.sh.in +++ b/tools/h5repack/h5repack.sh.in @@ -20,6 +20,8 @@ # Added $FILEN variables for file names # +srcdir=@srcdir@ + USE_FILTER_SZIP="@USE_FILTER_SZIP@" USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" USE_FILTER_SHUFFLE="@USE_FILTER_SHUFFLE@" @@ -53,15 +55,10 @@ H5DETECTSZIP_BIN=`pwd`/$H5DETECTSZIP nerrors=0 verbose=yes -# The build (current) directory might be different than the source directory. -# -if test -z "$srcdir"; then - srcdir=. -fi - # source dirs SRC_TOOLS="$srcdir/.." SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" + # testfiles source dirs for tools SRC_H5LS_TESTFILES="$SRC_TOOLS_TESTFILES" SRC_H5DUMP_TESTFILES="$SRC_TOOLS_TESTFILES" diff --git a/tools/h5stat/CMakeLists.txt b/tools/h5stat/CMakeLists.txt index e8d75e3..3518cfd 100644 --- a/tools/h5stat/CMakeLists.txt +++ b/tools/h5stat/CMakeLists.txt @@ -206,7 +206,7 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5stat ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5stat ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/h5stat/Makefile.in b/tools/h5stat/Makefile.in index 2efdf0c..389e460 100644 --- a/tools/h5stat/Makefile.in +++ b/tools/h5stat/Makefile.in @@ -75,10 +75,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/config/conclude.am check_PROGRAMS = $(am__EXEEXT_1) bin_PROGRAMS = h5stat$(EXEEXT) -TESTS = $(check_PROGRAMS) $(check_SCRIPTS) +TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) subdir = tools/h5stat ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -179,7 +179,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -197,12 +197,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -499,6 +496,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -915,7 +916,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -941,7 +942,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -965,7 +966,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -975,7 +976,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1065,7 +1066,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1095,7 +1096,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/h5stat/testh5stat.sh.in b/tools/h5stat/testh5stat.sh.in index 8646fd3..8d294be 100644 --- a/tools/h5stat/testh5stat.sh.in +++ b/tools/h5stat/testh5stat.sh.in @@ -15,6 +15,8 @@ # # Tests for the h5dump tool +srcdir=@srcdir@ + # Determine which filters are available USE_FILTER_SZIP="@USE_FILTER_SZIP@" USE_FILTER_DEFLATE="@USE_FILTER_DEFLATE@" @@ -40,11 +42,6 @@ AWK='awk' nerrors=0 verbose=yes -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi - # source dirs SRC_TOOLS="$srcdir/.." SRC_TOOLS_TESTFILES="$SRC_TOOLS/testfiles" diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in index af3b0b5..6a76e1d 100644 --- a/tools/lib/Makefile.in +++ b/tools/lib/Makefile.in @@ -72,10 +72,10 @@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am check_PROGRAMS = $(am__EXEEXT_1) -TESTS = $(check_PROGRAMS) +TESTS = $(am__EXEEXT_1) subdir = tools/lib ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs @@ -142,7 +142,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -160,12 +160,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -452,6 +449,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -797,7 +798,7 @@ help: # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -823,7 +824,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -847,7 +848,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -857,7 +858,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -947,7 +948,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -977,7 +978,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/misc/CMakeLists.txt b/tools/misc/CMakeLists.txt index 0687323..909b2ca 100644 --- a/tools/misc/CMakeLists.txt +++ b/tools/misc/CMakeLists.txt @@ -319,9 +319,9 @@ ENDIF (BUILD_TESTING) # Rules for Installation of tools using make Install target
#-----------------------------------------------------------------------------
-INSTALL_PROGRAM_PDB (h5debug ${HDF5_INSTALL_BIN_DIR} toolsapplications) -INSTALL_PROGRAM_PDB (h5repart ${HDF5_INSTALL_BIN_DIR} toolsapplications) -INSTALL_PROGRAM_PDB (h5mkgrp ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5debug ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5repart ${HDF5_INSTALL_BIN_DIR} toolsapplications) +#INSTALL_PROGRAM_PDB (h5mkgrp ${HDF5_INSTALL_BIN_DIR} toolsapplications) INSTALL ( TARGETS diff --git a/tools/misc/Makefile.am b/tools/misc/Makefile.am index 11c86fa..0055f39 100644 --- a/tools/misc/Makefile.am +++ b/tools/misc/Makefile.am @@ -25,7 +25,7 @@ INCLUDES=-I$(top_srcdir)/src -I$(top_srcdir)/tools/lib #test script and program TEST_PROG=h5repart_gentest talign -TEST_SCRIPT=testh5repart.sh $(srcdir)/testh5mkgrp.sh +TEST_SCRIPT=testh5repart.sh testh5mkgrp.sh check_PROGRAMS=$(TEST_PROG) repart_test check_SCRIPTS=$(TEST_SCRIPT) diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in index 50f8f23..8c2e1c1 100644 --- a/tools/misc/Makefile.in +++ b/tools/misc/Makefile.in @@ -69,21 +69,22 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/h5cc.in $(srcdir)/testh5repart.sh.in \ - $(top_srcdir)/bin/depcomp $(top_srcdir)/bin/mkinstalldirs \ + $(srcdir)/h5cc.in $(srcdir)/testh5mkgrp.sh.in \ + $(srcdir)/testh5repart.sh.in $(top_srcdir)/bin/depcomp \ + $(top_srcdir)/bin/mkinstalldirs \ $(top_srcdir)/config/commence.am \ $(top_srcdir)/config/conclude.am check_PROGRAMS = $(am__EXEEXT_1) repart_test$(EXEEXT) bin_PROGRAMS = h5debug$(EXEEXT) h5repart$(EXEEXT) h5mkgrp$(EXEEXT) -TESTS = $(check_PROGRAMS) $(check_SCRIPTS) +TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT) subdir = tools/misc ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/bin/mkinstalldirs CONFIG_HEADER = $(top_builddir)/src/H5config.h -CONFIG_CLEAN_FILES = h5cc testh5repart.sh +CONFIG_CLEAN_FILES = h5cc testh5mkgrp.sh testh5repart.sh CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" am__EXEEXT_1 = h5repart_gentest$(EXEEXT) talign$(EXEEXT) @@ -203,7 +204,7 @@ am__tty_colors_dummy = \ am__color_tests=no am__tty_colors = $(am__tty_colors_dummy) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = /home1/packages/automake/automake-1.9.6/bin/aclocal-1.9 -I /afs/ncsa/projects/hdf/packages/libtool_1.5.14/Linux_2.4/share/aclocal +ACLOCAL = @ACLOCAL@ ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@ AMTAR = @AMTAR@ @@ -221,12 +222,9 @@ AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@ AM_MAKEFLAGS = @AM_MAKEFLAGS@ AR = @AR@ AS = @AS@ - -# Set the paths for AFS installs of autotools for Linux machines -# Ideally, these tools should never be needed during the build. -AUTOCONF = /home1/packages/autoconf/autoconf-2.60/bin/autoconf -AUTOHEADER = /home1/packages/autoconf/autoconf-2.60/bin/autoheader -AUTOMAKE = /home1/packages/automake/automake-1.9.6/bin/automake-1.9 +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BYTESEX = @BYTESEX@ CC = @CC@ @@ -495,7 +493,7 @@ INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib #test script and program TEST_PROG = h5repart_gentest talign -TEST_SCRIPT = testh5repart.sh $(srcdir)/testh5mkgrp.sh +TEST_SCRIPT = testh5repart.sh testh5mkgrp.sh check_SCRIPTS = $(TEST_SCRIPT) SCRIPT_DEPEND = h5repart$(EXEEXT) h5mkgrp$(EXEEXT) bin_SCRIPTS = h5redeploy @@ -530,6 +528,10 @@ LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES) \ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ $(EXTRA_PROG) +chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) +TEST_EXTENSIONS = .sh +SH_LOG_COMPILER = $(SHELL) +AM_SH_LOG_FLAGS = TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) @@ -571,6 +573,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__aclocal_m4_deps): h5cc: $(top_builddir)/config.status $(srcdir)/h5cc.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ +testh5mkgrp.sh: $(top_builddir)/config.status $(srcdir)/testh5mkgrp.sh.in + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ testh5repart.sh: $(top_builddir)/config.status $(srcdir)/testh5repart.sh.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ install-binPROGRAMS: $(bin_PROGRAMS) @@ -976,7 +980,7 @@ h5redeploy: h5redeploy.in # build files in this directory. build-lib: $(LIB) build-progs: $(LIB) $(PROGS) -build-tests: $(LIB) $(PROGS) $(TESTS) +build-tests: $(LIB) $(PROGS) $(chk_TESTS) # General rule for recursive building targets. # BUILT_SOURCES contain targets that need to be built before anything else @@ -1002,7 +1006,7 @@ check-clean :: # Tell Automake to build tests when the user types `make all' (this is # not its default behavior). Also build EXTRA_LIB and EXTRA_PROG since # Automake won't build them automatically, either. -all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(TESTS) +all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS) # make install-doc doesn't do anything outside of doc directory, but # Makefiles should recognize it. @@ -1026,7 +1030,7 @@ check-install: installcheck # Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop. # The timestamps give a rough idea how much time the tests use. # -# Note that targets in TESTS (defined above) will be built when the user +# Note that targets in chk_TESTS (defined above) will be built when the user # types 'make tests' or 'make check', but only programs in TEST_PROG, # TEST_PROG_PARA, or TEST_SCRIPT will actually be executed. check-TESTS: test @@ -1036,7 +1040,7 @@ test _test: @$(MAKE) build-check-p # Actual execution of check-s. -build-check-s: $(LIB) $(PROGS) $(TESTS) +build-check-s: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then \ echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1126,7 +1130,7 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: fi # Actual execution of check-p. -build-check-p: $(LIB) $(PROGS) $(TESTS) +build-check-p: $(LIB) $(PROGS) $(chk_TESTS) @if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then \ echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \ fi @@ -1156,7 +1160,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) fi # Run test with different Virtual File Driver -check-vfd: $(LIB) $(PROGS) $(TESTS) +check-vfd: $(LIB) $(PROGS) $(chk_TESTS) @for vfd in $(VFD_LIST) dummy; do \ if test $$vfd != dummy; then \ echo "============================"; \ diff --git a/tools/misc/testh5mkgrp.sh b/tools/misc/testh5mkgrp.sh.in index 7bb98cb..dc127e8 100644 --- a/tools/misc/testh5mkgrp.sh +++ b/tools/misc/testh5mkgrp.sh.in @@ -19,6 +19,8 @@ # Tuesday, February 13, 2007 # +srcdir=@srcdir@ + TESTNAME=h5mkgrp EXIT_SUCCESS=0 EXIT_FAILURE=1 @@ -37,10 +39,6 @@ OUTDIR=../testfiles CMP='cmp -s' DIFF='diff -c' -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi test -d $OUTDIR || mkdir $OUTDIR # Print a line-line message left justified in a field of 70 characters diff --git a/tools/misc/testh5repart.sh.in b/tools/misc/testh5repart.sh.in index 7d4e020..fc33e0e 100644 --- a/tools/misc/testh5repart.sh.in +++ b/tools/misc/testh5repart.sh.in @@ -15,6 +15,8 @@ # # Tests for the h5repart tool +srcdir=@srcdir@ + TESTNAME=h5repart EXIT_SUCCESS=0 EXIT_FAILURE=1 @@ -28,11 +30,6 @@ REPARTED_FAM_BIN=`pwd`/$REPARTED_FAM # The path of the test binary nerrors=0 verbose=yes -# The build (current) directory might be different than the source directory. -if test -z "$srcdir"; then - srcdir=. -fi - test -d ../testfiles || mkdir ../testfiles actual_dir=`pwd`/../testfiles diff --git a/tools/testfiles/h5dump-help.txt b/tools/testfiles/h5dump-help.txt index 5e0a8f1..74fc104 100644 --- a/tools/testfiles/h5dump-help.txt +++ b/tools/testfiles/h5dump-help.txt @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without diff --git a/tools/testfiles/tnofilename-with-packed-bits.ddl b/tools/testfiles/tnofilename-with-packed-bits.ddl index a82c94e..5e6f580 100644 --- a/tools/testfiles/tnofilename-with-packed-bits.ddl +++ b/tools/testfiles/tnofilename-with-packed-bits.ddl @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without diff --git a/tools/testfiles/tpbitsIncomplete.ddl b/tools/testfiles/tpbitsIncomplete.ddl index 72d54fc..10b5a23 100644 --- a/tools/testfiles/tpbitsIncomplete.ddl +++ b/tools/testfiles/tpbitsIncomplete.ddl @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without diff --git a/tools/testfiles/tpbitsLengthExceeded.ddl b/tools/testfiles/tpbitsLengthExceeded.ddl index d8b627c..17dd963 100644 --- a/tools/testfiles/tpbitsLengthExceeded.ddl +++ b/tools/testfiles/tpbitsLengthExceeded.ddl @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without diff --git a/tools/testfiles/tpbitsLengthPositive.ddl b/tools/testfiles/tpbitsLengthPositive.ddl index 39cef23..6d05b47 100644 --- a/tools/testfiles/tpbitsLengthPositive.ddl +++ b/tools/testfiles/tpbitsLengthPositive.ddl @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without diff --git a/tools/testfiles/tpbitsMaxExceeded.ddl b/tools/testfiles/tpbitsMaxExceeded.ddl index 5f35825..eca1248 100644 --- a/tools/testfiles/tpbitsMaxExceeded.ddl +++ b/tools/testfiles/tpbitsMaxExceeded.ddl @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without diff --git a/tools/testfiles/tpbitsOffsetExceeded.ddl b/tools/testfiles/tpbitsOffsetExceeded.ddl index 92cc816..b0c655d 100644 --- a/tools/testfiles/tpbitsOffsetExceeded.ddl +++ b/tools/testfiles/tpbitsOffsetExceeded.ddl @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without diff --git a/tools/testfiles/tpbitsOffsetNegative.ddl b/tools/testfiles/tpbitsOffsetNegative.ddl index c318834..213641b 100644 --- a/tools/testfiles/tpbitsOffsetNegative.ddl +++ b/tools/testfiles/tpbitsOffsetNegative.ddl @@ -1,22 +1,22 @@ usage: h5dump [OPTIONS] files OPTIONS - -h, --help Print a usage message and exit - -n, --contents Print a list of the file contents and exit + -h, --help Print a usage message and exit + -n, --contents Print a list of the file contents and exit Optional value 1 also prints attributes. - -B, --superblock Print the content of the super block - -H, --header Print the header only; no data is displayed - -A, --onlyattr Print the header and value of attributes - -i, --object-ids Print the object ids - -r, --string Print 1-byte integer datasets as ASCII - -e, --escape Escape non printing characters - -V, --version Print version number and exit + -B, --superblock Print the content of the super block + -H, --header Print the header only; no data is displayed + -A, --onlyattr Print the header and value of attributes + -i, --object-ids Print the object ids + -r, --string Print 1-byte integer datasets as ASCII + -e, --escape Escape non printing characters + -V, --version Print version number and exit -a P, --attribute=P Print the specified attribute If an attribute name contains a slash (/), escape the slash with a preceding backslash (\). (See example section below.) -d P, --dataset=P Print the specified dataset - -y, --noindex Do not print array indices with the data - -p, --properties Print dataset filters, storage layout and fill value + -y, --noindex Do not print array indices with the data + -p, --properties Print dataset filters, storage layout and fill value -f D, --filedriver=D Specify which driver to open the file with -g P, --group=P Print the specified group and all members -l P, --soft-link=P Print the value(s) of the specified soft link @@ -35,17 +35,17 @@ usage: h5dump [OPTIONS] files separated by commas. Offset is the beginning bit in the data value and length is the number of bits of the mask. - -R, --region Print dataset pointed by region references - -x, --xml Output in XML using Schema - -u, --use-dtd Output in XML using DTD + -R, --region Print dataset pointed by region references + -x, --xml Output in XML using Schema + -u, --use-dtd Output in XML using DTD -D U, --xml-dtd=U Use the DTD or schema at U - -X S, --xml-ns=S (XML Schema) Use qualified names n the XML + -X S, --xml-ns=S (XML Schema) Use qualified names n the XML ":": no namespace, default: "hdf5:" E.g., to dump a file called `-f', use h5dump -- -f --enable-error-stack Prints messages from the HDF5 error stack as they occur. --no-compact-subset Disable compact form of subsetting and allow the use - of "[" in datset names. + of "[" in dataset names. Subsetting is available by using the following options with a dataset attribute. Subsetting is done by selecting a hyperslab from the data. @@ -59,7 +59,8 @@ usage: h5dump [OPTIONS] files -c COUNT, --count=COUNT Number of blocks to include in selection -k BLOCK, --block=BLOCK Size of block in hyperslab START, COUNT, STRIDE, and BLOCK - is a list of integers the number of which are equal to the - number of dimensions in the dataspace being queried + number of dimensions in the dataspace being queried + (Alternate compact form of subsetting is described in the Reference Manual) D - is the file driver to use in opening the file. Acceptable values are "sec2", "family", "split", "multi", "direct", and "stream". Without |