14 files changed, 20736 insertions, 0 deletions

diff --git a/tools/Makefile.in b/tools/Makefile.in
new file mode 100644
index 0000000..7d93525
--- /dev/null
+++ b/tools/Makefile.in
@@ -0,0 +1,1385 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# Tools HDF5 Makefile(.in)
+#
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+TESTS =
+subdir = tools
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	check recheck distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am COPYING
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
+CONFIG = ordered
+
+# All subdirectories
+SUBDIRS = lib h5diff h5ls h5dump misc h5import h5repack h5jam h5copy h5stat h5format_convert perform
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .log .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all 
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile all-local
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
+	check check-TESTS check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags ctags-am distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
+	recheck tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5copy/Makefile.in b/tools/h5copy/Makefile.in
new file mode 100644
index 0000000..a1d6395
--- /dev/null
+++ b/tools/h5copy/Makefile.in
@@ -0,0 +1,1449 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = h5copy$(EXEEXT)
+check_PROGRAMS = $(am__EXEEXT_1)
+TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
+subdir = tools/h5copy
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = testh5copy.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+am__EXEEXT_1 = h5copygentest$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+h5copy_SOURCES = h5copy.c
+h5copy_OBJECTS = h5copy.$(OBJEXT)
+h5copy_LDADD = $(LDADD)
+h5copy_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5copy_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5copy_LDFLAGS) $(LDFLAGS) -o $@
+am_h5copygentest_OBJECTS = h5copygentest.$(OBJEXT)
+h5copygentest_OBJECTS = $(am_h5copygentest_OBJECTS)
+h5copygentest_LDADD = $(LDADD)
+h5copygentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = h5copy.c $(h5copygentest_SOURCES)
+DIST_SOURCES = h5copy.c $(h5copygentest_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5copy.sh.in \
+	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src and tools/lib directories
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.  *.h5 are generated by h5dumpgentest.  They should
+# copied to the testfiles/ directory if update is required.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
+
+# Test programs and scripts
+TEST_PROG = h5copygentest
+TEST_SCRIPT = testh5copy.sh
+check_SCRIPTS = $(TEST_SCRIPT)
+SCRIPT_DEPEND = h5copy$(EXEEXT)
+
+# Add h5copy specific linker flags here
+h5copy_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# source file for the test file generator
+h5copygentest_SOURCES = h5copygentest.c
+
+# All programs depend on the hdf5 and h5tools libraries
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5copy/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5copy/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+testh5copy.sh: $(top_builddir)/config.status $(srcdir)/testh5copy.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+h5copy$(EXEEXT): $(h5copy_OBJECTS) $(h5copy_DEPENDENCIES) $(EXTRA_h5copy_DEPENDENCIES) 
+	@rm -f h5copy$(EXEEXT)
+	$(AM_V_CCLD)$(h5copy_LINK) $(h5copy_OBJECTS) $(h5copy_LDADD) $(LIBS)
+
+h5copygentest$(EXEEXT): $(h5copygentest_OBJECTS) $(h5copygentest_DEPENDENCIES) $(EXTRA_h5copygentest_DEPENDENCIES) 
+	@rm -f h5copygentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5copygentest_OBJECTS) $(h5copygentest_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5copy.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5copygentest.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5copygentest.log: h5copygentest$(EXEEXT)
+	@p='h5copygentest$(EXEEXT)'; \
+	b='h5copygentest'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in
new file mode 100644
index 0000000..403b54b
--- /dev/null
+++ b/tools/h5diff/Makefile.in
@@ -0,0 +1,1473 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = h5diff$(EXEEXT) $(am__EXEEXT_1)
+check_PROGRAMS = $(am__EXEEXT_2)
+TESTS = $(am__EXEEXT_2) $(TEST_SCRIPT)
+subdir = tools/h5diff
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = testh5diff.sh testph5diff.sh
+CONFIG_CLEAN_VPATH_FILES =
+@BUILD_PARALLEL_CONDITIONAL_TRUE@am__EXEEXT_1 = ph5diff$(EXEEXT)
+am__installdirs = "$(DESTDIR)$(bindir)"
+am__EXEEXT_2 = h5diffgentest$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+am_h5diff_OBJECTS = h5diff_main.$(OBJEXT) h5diff_common.$(OBJEXT)
+h5diff_OBJECTS = $(am_h5diff_OBJECTS)
+h5diff_LDADD = $(LDADD)
+h5diff_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5diff_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5diff_LDFLAGS) $(LDFLAGS) -o $@
+am_h5diffgentest_OBJECTS = h5diffgentest.$(OBJEXT)
+h5diffgentest_OBJECTS = $(am_h5diffgentest_OBJECTS)
+h5diffgentest_LDADD = $(LDADD)
+h5diffgentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+am_ph5diff_OBJECTS = ph5diff_main.$(OBJEXT) h5diff_common.$(OBJEXT)
+ph5diff_OBJECTS = $(am_ph5diff_OBJECTS)
+ph5diff_LDADD = $(LDADD)
+ph5diff_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(h5diff_SOURCES) $(h5diffgentest_SOURCES) \
+	$(ph5diff_SOURCES)
+DIST_SOURCES = $(h5diff_SOURCES) $(h5diffgentest_SOURCES) \
+	$(ph5diff_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5diff.sh.in \
+	$(srcdir)/testph5diff.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src and tools/lib directories
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.  *.h5 are generated by h5diff.  They should
+# be copied to the testfiles/ directory if update is required
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 expect_sorted \
+	actual_sorted
+
+# Always build and test h5diff but build and test ph5diff only if parallel
+# is enabled.
+@BUILD_PARALLEL_CONDITIONAL_TRUE@H5PDIFF = ph5diff
+@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_SCRIPT_PARA = testph5diff.sh
+
+# Add h5diff specific linker flags here
+h5diff_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# Test programs and scripts
+TEST_PROG = h5diffgentest
+TEST_SCRIPT = testh5diff.sh
+check_SCRIPTS = $(TEST_SCRIPT) $(TEST_SCRIPT_PARA)
+# The parallel test script testph5diff.sh actually depends on testh5diff.sh.
+SCRIPT_DEPEND = h5diff$(EXEEXT) $(H5PDIFF) testh5diff.sh
+
+# Source files for the program
+h5diff_SOURCES = h5diff_main.c h5diff_common.c
+ph5diff_SOURCES = ph5diff_main.c h5diff_common.c
+h5diffgentest_SOURCES = h5diffgentest.c
+
+# Programs depend on the main HDF5 library and tools library
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5diff/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5diff/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+testh5diff.sh: $(top_builddir)/config.status $(srcdir)/testh5diff.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testph5diff.sh: $(top_builddir)/config.status $(srcdir)/testph5diff.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+h5diff$(EXEEXT): $(h5diff_OBJECTS) $(h5diff_DEPENDENCIES) $(EXTRA_h5diff_DEPENDENCIES) 
+	@rm -f h5diff$(EXEEXT)
+	$(AM_V_CCLD)$(h5diff_LINK) $(h5diff_OBJECTS) $(h5diff_LDADD) $(LIBS)
+
+h5diffgentest$(EXEEXT): $(h5diffgentest_OBJECTS) $(h5diffgentest_DEPENDENCIES) $(EXTRA_h5diffgentest_DEPENDENCIES) 
+	@rm -f h5diffgentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5diffgentest_OBJECTS) $(h5diffgentest_LDADD) $(LIBS)
+
+ph5diff$(EXEEXT): $(ph5diff_OBJECTS) $(ph5diff_DEPENDENCIES) $(EXTRA_ph5diff_DEPENDENCIES) 
+	@rm -f ph5diff$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(ph5diff_OBJECTS) $(ph5diff_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_common.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diffgentest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ph5diff_main.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5diffgentest.log: h5diffgentest$(EXEEXT)
+	@p='h5diffgentest$(EXEEXT)'; \
+	b='h5diffgentest'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in
new file mode 100644
index 0000000..032686c
--- /dev/null
+++ b/tools/h5dump/Makefile.in
@@ -0,0 +1,1471 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1) binread$(EXEEXT)
+bin_PROGRAMS = h5dump$(EXEEXT)
+TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
+subdir = tools/h5dump
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = testh5dump.sh testh5dumppbits.sh testh5dumpvds.sh \
+	testh5dumpxml.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+am__EXEEXT_1 = h5dumpgentest$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+binread_SOURCES = binread.c
+binread_OBJECTS = binread.$(OBJEXT)
+binread_LDADD = $(LDADD)
+binread_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_h5dump_OBJECTS = h5dump.$(OBJEXT) h5dump_ddl.$(OBJEXT) \
+	h5dump_xml.$(OBJEXT)
+h5dump_OBJECTS = $(am_h5dump_OBJECTS)
+h5dump_LDADD = $(LDADD)
+h5dump_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5dump_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5dump_LDFLAGS) $(LDFLAGS) -o $@
+h5dumpgentest_SOURCES = h5dumpgentest.c
+h5dumpgentest_OBJECTS = h5dumpgentest.$(OBJEXT)
+h5dumpgentest_LDADD = $(LDADD)
+h5dumpgentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = binread.c $(h5dump_SOURCES) h5dumpgentest.c
+DIST_SOURCES = binread.c $(h5dump_SOURCES) h5dumpgentest.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5dump.sh.in \
+	$(srcdir)/testh5dumppbits.sh.in $(srcdir)/testh5dumpvds.sh.in \
+	$(srcdir)/testh5dumpxml.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include files in /src directory and /tools/lib directory
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.  *.h5 are generated by h5dumpgentest.  They should
+# copied to the testfiles/ directory if update is required.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.bin
+
+# Test programs and scripts
+TEST_PROG = h5dumpgentest
+TEST_SCRIPT = testh5dump.sh testh5dumppbits.sh testh5dumpvds.sh testh5dumpxml.sh
+check_SCRIPTS = $(TEST_SCRIPT)
+SCRIPT_DEPEND = h5dump$(EXEEXT)
+
+# Add h5dump specific linker flags here
+h5dump_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# All the programs depend on the hdf5 and h5tools libraries
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Source files for the program
+h5dump_SOURCES = h5dump.c h5dump_ddl.c h5dump_xml.c
+DISTCLEANFILES = testh5dump.sh testh5dumppbits.sh testh5dumpxml.sh
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5dump/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5dump/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+testh5dump.sh: $(top_builddir)/config.status $(srcdir)/testh5dump.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testh5dumppbits.sh: $(top_builddir)/config.status $(srcdir)/testh5dumppbits.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testh5dumpvds.sh: $(top_builddir)/config.status $(srcdir)/testh5dumpvds.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testh5dumpxml.sh: $(top_builddir)/config.status $(srcdir)/testh5dumpxml.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+binread$(EXEEXT): $(binread_OBJECTS) $(binread_DEPENDENCIES) $(EXTRA_binread_DEPENDENCIES) 
+	@rm -f binread$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(binread_OBJECTS) $(binread_LDADD) $(LIBS)
+
+h5dump$(EXEEXT): $(h5dump_OBJECTS) $(h5dump_DEPENDENCIES) $(EXTRA_h5dump_DEPENDENCIES) 
+	@rm -f h5dump$(EXEEXT)
+	$(AM_V_CCLD)$(h5dump_LINK) $(h5dump_OBJECTS) $(h5dump_LDADD) $(LIBS)
+
+h5dumpgentest$(EXEEXT): $(h5dumpgentest_OBJECTS) $(h5dumpgentest_DEPENDENCIES) $(EXTRA_h5dumpgentest_DEPENDENCIES) 
+	@rm -f h5dumpgentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5dumpgentest_OBJECTS) $(h5dumpgentest_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/binread.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump_ddl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dump_xml.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5dumpgentest.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5dumpgentest.log: h5dumpgentest$(EXEEXT)
+	@p='h5dumpgentest$(EXEEXT)'; \
+	b='h5dumpgentest'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5format_convert/Makefile.in b/tools/h5format_convert/Makefile.in
new file mode 100644
index 0000000..ec06514
--- /dev/null
+++ b/tools/h5format_convert/Makefile.in
@@ -0,0 +1,1459 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1) h5fc_chk_idx$(EXEEXT)
+bin_PROGRAMS = h5format_convert$(EXEEXT)
+TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
+subdir = tools/h5format_convert
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = testh5fc.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+am__EXEEXT_1 = h5fc_gentest$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+h5fc_chk_idx_SOURCES = h5fc_chk_idx.c
+h5fc_chk_idx_OBJECTS = h5fc_chk_idx.$(OBJEXT)
+h5fc_chk_idx_LDADD = $(LDADD)
+h5fc_chk_idx_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5fc_gentest_SOURCES = h5fc_gentest.c
+h5fc_gentest_OBJECTS = h5fc_gentest.$(OBJEXT)
+h5fc_gentest_LDADD = $(LDADD)
+h5fc_gentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5format_convert_SOURCES = h5format_convert.c
+h5format_convert_OBJECTS = h5format_convert.$(OBJEXT)
+h5format_convert_LDADD = $(LDADD)
+h5format_convert_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5format_convert_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
+	$(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+	$(AM_CFLAGS) $(CFLAGS) $(h5format_convert_LDFLAGS) $(LDFLAGS) \
+	-o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = h5fc_chk_idx.c h5fc_gentest.c h5format_convert.c
+DIST_SOURCES = h5fc_chk_idx.c h5fc_gentest.c h5format_convert.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5fc.sh.in \
+	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src directory
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Tell automake to clean h5redeploy script
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
+
+#test script and program
+TEST_PROG = h5fc_gentest
+TEST_SCRIPT = testh5fc.sh
+check_SCRIPTS = $(TEST_SCRIPT)
+SCRIPT_DEPEND = h5format_convert$(EXEEXT)
+
+# Add h5format_convert specific linker flags here
+h5format_convert_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# These were generated by configure.  Remove them only when distclean.
+DISTCLEANFILES = testh5fc.sh
+
+# All programs rely on hdf5 library and h5tools library
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5format_convert/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5format_convert/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+testh5fc.sh: $(top_builddir)/config.status $(srcdir)/testh5fc.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+h5fc_chk_idx$(EXEEXT): $(h5fc_chk_idx_OBJECTS) $(h5fc_chk_idx_DEPENDENCIES) $(EXTRA_h5fc_chk_idx_DEPENDENCIES) 
+	@rm -f h5fc_chk_idx$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5fc_chk_idx_OBJECTS) $(h5fc_chk_idx_LDADD) $(LIBS)
+
+h5fc_gentest$(EXEEXT): $(h5fc_gentest_OBJECTS) $(h5fc_gentest_DEPENDENCIES) $(EXTRA_h5fc_gentest_DEPENDENCIES) 
+	@rm -f h5fc_gentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5fc_gentest_OBJECTS) $(h5fc_gentest_LDADD) $(LIBS)
+
+h5format_convert$(EXEEXT): $(h5format_convert_OBJECTS) $(h5format_convert_DEPENDENCIES) $(EXTRA_h5format_convert_DEPENDENCIES) 
+	@rm -f h5format_convert$(EXEEXT)
+	$(AM_V_CCLD)$(h5format_convert_LINK) $(h5format_convert_OBJECTS) $(h5format_convert_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5fc_chk_idx.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5fc_gentest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5format_convert.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5fc_gentest.log: h5fc_gentest$(EXEEXT)
+	@p='h5fc_gentest$(EXEEXT)'; \
+	b='h5fc_gentest'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in
new file mode 100644
index 0000000..fadfc0a
--- /dev/null
+++ b/tools/h5import/Makefile.in
@@ -0,0 +1,1445 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1)
+bin_PROGRAMS = h5import$(EXEEXT)
+TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
+subdir = tools/h5import
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = h5importtestutil.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+am__EXEEXT_1 = h5importtest$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+h5import_SOURCES = h5import.c
+h5import_OBJECTS = h5import.$(OBJEXT)
+h5import_LDADD = $(LDADD)
+h5import_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5import_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5import_LDFLAGS) $(LDFLAGS) -o $@
+h5importtest_SOURCES = h5importtest.c
+h5importtest_OBJECTS = h5importtest.$(OBJEXT)
+h5importtest_LDADD = $(LDADD)
+h5importtest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = h5import.c h5importtest.c
+DIST_SOURCES = h5import.c h5importtest.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(srcdir)/h5importtestutil.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src and tools/lib directories
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files from h5importtest
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.bin
+
+# Test programs and scripts
+TEST_PROG = h5importtest
+TEST_SCRIPT = h5importtestutil.sh
+check_SCRIPT = h5importtestutil.sh
+SCRIPT_DEPEND = h5import$(EXEEXT)
+
+# Add h5import specific linker flags here
+h5import_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# All programs depend on the main hdf5 library and the tools library
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5import/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5import/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+h5importtestutil.sh: $(top_builddir)/config.status $(srcdir)/h5importtestutil.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+h5import$(EXEEXT): $(h5import_OBJECTS) $(h5import_DEPENDENCIES) $(EXTRA_h5import_DEPENDENCIES) 
+	@rm -f h5import$(EXEEXT)
+	$(AM_V_CCLD)$(h5import_LINK) $(h5import_OBJECTS) $(h5import_LDADD) $(LIBS)
+
+h5importtest$(EXEEXT): $(h5importtest_OBJECTS) $(h5importtest_DEPENDENCIES) $(EXTRA_h5importtest_DEPENDENCIES) 
+	@rm -f h5importtest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5importtest_OBJECTS) $(h5importtest_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5import.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5importtest.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5importtest.log: h5importtest$(EXEEXT)
+	@p='h5importtest$(EXEEXT)'; \
+	b='h5importtest'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in
new file mode 100644
index 0000000..d03753d
--- /dev/null
+++ b/tools/h5jam/Makefile.in
@@ -0,0 +1,1467 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = h5jam$(EXEEXT) h5unjam$(EXEEXT)
+check_PROGRAMS = tellub$(EXEEXT) h5jamgentest$(EXEEXT) getub$(EXEEXT)
+TESTS = $(TEST_SCRIPT)
+subdir = tools/h5jam
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = testh5jam.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+getub_SOURCES = getub.c
+getub_OBJECTS = getub.$(OBJEXT)
+getub_LDADD = $(LDADD)
+getub_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5jam_SOURCES = h5jam.c
+h5jam_OBJECTS = h5jam.$(OBJEXT)
+h5jam_LDADD = $(LDADD)
+h5jam_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5jam_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5jam_LDFLAGS) $(LDFLAGS) -o $@
+h5jamgentest_SOURCES = h5jamgentest.c
+h5jamgentest_OBJECTS = h5jamgentest.$(OBJEXT)
+h5jamgentest_LDADD = $(LDADD)
+h5jamgentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5unjam_SOURCES = h5unjam.c
+h5unjam_OBJECTS = h5unjam.$(OBJEXT)
+h5unjam_LDADD = $(LDADD)
+h5unjam_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5unjam_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5unjam_LDFLAGS) $(LDFLAGS) -o $@
+tellub_SOURCES = tellub.c
+tellub_OBJECTS = tellub.$(OBJEXT)
+tellub_LDADD = $(LDADD)
+tellub_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = getub.c h5jam.c h5jamgentest.c h5unjam.c tellub.c
+DIST_SOURCES = getub.c h5jam.c h5jamgentest.c h5unjam.c tellub.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5jam.sh.in \
+	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src and tools/lib directories
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.  *.h5 are generated by jamgentest.  They should
+# copied to the testfiles/ directory if update is required.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 \
+	testfiles/h5jam-*-sav testfiles/h5unjam-*-sav
+TEST_SCRIPT = testh5jam.sh
+
+# Add h5jam and h5unjam specific linker flags here
+h5jam_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+h5unjam_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+check_SCRIPTS = $(TEST_SCRIPT)
+SCRIPT_DEPEND = h5jam$(EXEEXT) h5unjam$(EXEEXT)
+
+# Link against the main HDF5 library and tools library
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+DISTCLEANFILES = testh5jam.sh
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5jam/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5jam/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+testh5jam.sh: $(top_builddir)/config.status $(srcdir)/testh5jam.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+getub$(EXEEXT): $(getub_OBJECTS) $(getub_DEPENDENCIES) $(EXTRA_getub_DEPENDENCIES) 
+	@rm -f getub$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(getub_OBJECTS) $(getub_LDADD) $(LIBS)
+
+h5jam$(EXEEXT): $(h5jam_OBJECTS) $(h5jam_DEPENDENCIES) $(EXTRA_h5jam_DEPENDENCIES) 
+	@rm -f h5jam$(EXEEXT)
+	$(AM_V_CCLD)$(h5jam_LINK) $(h5jam_OBJECTS) $(h5jam_LDADD) $(LIBS)
+
+h5jamgentest$(EXEEXT): $(h5jamgentest_OBJECTS) $(h5jamgentest_DEPENDENCIES) $(EXTRA_h5jamgentest_DEPENDENCIES) 
+	@rm -f h5jamgentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5jamgentest_OBJECTS) $(h5jamgentest_LDADD) $(LIBS)
+
+h5unjam$(EXEEXT): $(h5unjam_OBJECTS) $(h5unjam_DEPENDENCIES) $(EXTRA_h5unjam_DEPENDENCIES) 
+	@rm -f h5unjam$(EXEEXT)
+	$(AM_V_CCLD)$(h5unjam_LINK) $(h5unjam_OBJECTS) $(h5unjam_LDADD) $(LIBS)
+
+tellub$(EXEEXT): $(tellub_OBJECTS) $(tellub_DEPENDENCIES) $(EXTRA_tellub_DEPENDENCIES) 
+	@rm -f tellub$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(tellub_OBJECTS) $(tellub_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getub.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5jam.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5jamgentest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5unjam.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tellub.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in
new file mode 100644
index 0000000..f9fe56f
--- /dev/null
+++ b/tools/h5ls/Makefile.in
@@ -0,0 +1,1413 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = h5ls$(EXEEXT)
+TESTS = $(TEST_SCRIPT)
+subdir = tools/h5ls
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = testh5ls.sh testh5lsvds.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+h5ls_SOURCES = h5ls.c
+h5ls_OBJECTS = h5ls.$(OBJEXT)
+h5ls_LDADD = $(LDADD)
+h5ls_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5ls_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5ls_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = h5ls.c
+DIST_SOURCES = h5ls.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5ls.sh.in \
+	$(srcdir)/testh5lsvds.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src and tools/lib directories
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
+
+# Test programs and scripts
+TEST_SCRIPT = testh5ls.sh testh5lsvds.sh
+check_SCRIPTS = $(TEST_SCRIPT)
+SCRIPT_DEPEND = h5ls$(EXEEXT)
+
+# Add h5ls specific linker flags here
+h5ls_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# All programs depend on the hdf5 and h5tools libraries
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5ls/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5ls/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+testh5ls.sh: $(top_builddir)/config.status $(srcdir)/testh5ls.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testh5lsvds.sh: $(top_builddir)/config.status $(srcdir)/testh5lsvds.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+h5ls$(EXEEXT): $(h5ls_OBJECTS) $(h5ls_DEPENDENCIES) $(EXTRA_h5ls_DEPENDENCIES) 
+	@rm -f h5ls$(EXEEXT)
+	$(AM_V_CCLD)$(h5ls_LINK) $(h5ls_OBJECTS) $(h5ls_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5ls.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-generic clean-libtool \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
+	uninstall uninstall-am uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in
new file mode 100644
index 0000000..402acb7
--- /dev/null
+++ b/tools/h5repack/Makefile.in
@@ -0,0 +1,1561 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+noinst_PROGRAMS = testh5repack_detect_szip$(EXEEXT)
+@HAVE_SHARED_CONDITIONAL_TRUE@@USE_PLUGINS_CONDITIONAL_TRUE@am__append_1 = h5repack_plugin.sh
+check_PROGRAMS = $(am__EXEEXT_1)
+bin_PROGRAMS = h5repack$(EXEEXT)
+TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
+subdir = tools/h5repack
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = h5repack.sh h5repack_plugin.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libdynlibadd_la_LIBADD =
+am__libdynlibadd_la_SOURCES_DIST = dynlib_rpk.c
+@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibadd_la_OBJECTS =  \
+@HAVE_SHARED_CONDITIONAL_TRUE@	dynlib_rpk.lo
+libdynlibadd_la_OBJECTS = $(am_libdynlibadd_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+@HAVE_SHARED_CONDITIONAL_TRUE@am_libdynlibadd_la_rpath = -rpath \
+@HAVE_SHARED_CONDITIONAL_TRUE@	$(libdir)
+am__EXEEXT_1 = h5repacktst$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+am__objects_1 = h5repack.$(OBJEXT) h5repack_copy.$(OBJEXT) \
+	h5repack_filters.$(OBJEXT) h5repack_opttable.$(OBJEXT) \
+	h5repack_parse.$(OBJEXT) h5repack_refs.$(OBJEXT) \
+	h5repack_verify.$(OBJEXT)
+am_h5repack_OBJECTS = $(am__objects_1) h5repack_main.$(OBJEXT)
+h5repack_OBJECTS = $(am_h5repack_OBJECTS)
+h5repack_LDADD = $(LDADD)
+h5repack_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5repack_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5repack_LDFLAGS) $(LDFLAGS) -o $@
+am_h5repacktst_OBJECTS = $(am__objects_1) h5repacktst.$(OBJEXT)
+h5repacktst_OBJECTS = $(am_h5repacktst_OBJECTS)
+h5repacktst_LDADD = $(LDADD)
+h5repacktst_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+am_testh5repack_detect_szip_OBJECTS =  \
+	testh5repack_detect_szip.$(OBJEXT)
+testh5repack_detect_szip_OBJECTS =  \
+	$(am_testh5repack_detect_szip_OBJECTS)
+testh5repack_detect_szip_LDADD = $(LDADD)
+testh5repack_detect_szip_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) \
+	$(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libdynlibadd_la_SOURCES) $(h5repack_SOURCES) \
+	$(h5repacktst_SOURCES) $(testh5repack_detect_szip_SOURCES)
+DIST_SOURCES = $(am__libdynlibadd_la_SOURCES_DIST) $(h5repack_SOURCES) \
+	$(h5repacktst_SOURCES) $(testh5repack_detect_szip_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/h5repack.sh.in \
+	$(srcdir)/h5repack_plugin.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src, test, and tools/lib directories
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.  *.h5 are generated by h5repack.  They should
+# copied to the testfiles/ directory if update is required.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 *.bin \
+	testfiles/h5diff_attr1.h5 testfiles/tfamily*.h5
+
+# Test programs and scripts
+TEST_SCRIPT = h5repack.sh $(am__append_1)
+TEST_PROG = h5repacktst
+SCRIPT_DEPEND = h5repack$(EXEEXT)
+check_SCRIPTS = $(TEST_SCRIPT)
+
+# Add h5repack specific linker flags here
+h5repack_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# Depend on the hdf5 library, the tools library, the test library
+LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+
+# Source files
+COMMON_SOURCES = h5repack.c h5repack_copy.c h5repack_filters.c \
+               h5repack_opttable.c h5repack_parse.c h5repack_refs.c \
+               h5repack_verify.c
+
+h5repack_SOURCES = $(COMMON_SOURCES) h5repack_main.c
+h5repacktst_SOURCES = $(COMMON_SOURCES) h5repacktst.c 
+testh5repack_detect_szip_SOURCES = testh5repack_detect_szip.c
+@HAVE_SHARED_CONDITIONAL_TRUE@lib_LTLIBRARIES = libdynlibadd.la
+@HAVE_SHARED_CONDITIONAL_TRUE@libdynlibadd_la_SOURCES = dynlib_rpk.c
+DISTCLEANFILES = h5repack.sh h5repack_plugin.sh
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5repack/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5repack/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+h5repack.sh: $(top_builddir)/config.status $(srcdir)/h5repack.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+h5repack_plugin.sh: $(top_builddir)/config.status $(srcdir)/h5repack_plugin.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libdynlibadd.la: $(libdynlibadd_la_OBJECTS) $(libdynlibadd_la_DEPENDENCIES) $(EXTRA_libdynlibadd_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(am_libdynlibadd_la_rpath) $(libdynlibadd_la_OBJECTS) $(libdynlibadd_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-noinstPROGRAMS:
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+h5repack$(EXEEXT): $(h5repack_OBJECTS) $(h5repack_DEPENDENCIES) $(EXTRA_h5repack_DEPENDENCIES) 
+	@rm -f h5repack$(EXEEXT)
+	$(AM_V_CCLD)$(h5repack_LINK) $(h5repack_OBJECTS) $(h5repack_LDADD) $(LIBS)
+
+h5repacktst$(EXEEXT): $(h5repacktst_OBJECTS) $(h5repacktst_DEPENDENCIES) $(EXTRA_h5repacktst_DEPENDENCIES) 
+	@rm -f h5repacktst$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5repacktst_OBJECTS) $(h5repacktst_LDADD) $(LIBS)
+
+testh5repack_detect_szip$(EXEEXT): $(testh5repack_detect_szip_OBJECTS) $(testh5repack_detect_szip_DEPENDENCIES) $(EXTRA_testh5repack_detect_szip_DEPENDENCIES) 
+	@rm -f testh5repack_detect_szip$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(testh5repack_detect_szip_OBJECTS) $(testh5repack_detect_szip_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynlib_rpk.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_copy.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_filters.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_opttable.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_parse.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_refs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repack_verify.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repacktst.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testh5repack_detect_szip.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5repacktst.log: h5repacktst$(EXEEXT)
+	@p='h5repacktst$(EXEEXT)'; \
+	b='h5repacktst'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) all-local
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+@HAVE_SHARED_CONDITIONAL_FALSE@install-exec-hook:
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libLTLIBRARIES clean-libtool clean-noinstPROGRAMS \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+.MAKE: check-am install-am install-exec-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libLTLIBRARIES clean-libtool \
+	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-exec-hook install-html install-html-am \
+	install-info install-info-am install-libLTLIBRARIES \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
+	recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# The h5repack.sh script needs h5repacktst to run first.
+h5repack.sh.chkexe_: h5repacktst.chkexe_
+
+@HAVE_SHARED_CONDITIONAL_TRUE@  # Build it as shared library if configure is enabled for shared library.
+
+@HAVE_SHARED_CONDITIONAL_TRUE@install-exec-hook:
+@HAVE_SHARED_CONDITIONAL_TRUE@	$(RM) $(DESTDIR)$(libdir)/*dynlib*
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/h5stat/Makefile.in b/tools/h5stat/Makefile.in
new file mode 100644
index 0000000..67de66c
--- /dev/null
+++ b/tools/h5stat/Makefile.in
@@ -0,0 +1,1495 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1)
+bin_PROGRAMS = h5stat$(EXEEXT)
+TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
+subdir = tools/h5stat
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = testh5stat.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
+am__EXEEXT_1 = h5stat_gentest$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+h5stat_SOURCES = h5stat.c
+h5stat_OBJECTS = h5stat.$(OBJEXT)
+h5stat_LDADD = $(LDADD)
+h5stat_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5stat_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5stat_LDFLAGS) $(LDFLAGS) -o $@
+h5stat_gentest_SOURCES = h5stat_gentest.c
+h5stat_gentest_OBJECTS = h5stat_gentest.$(OBJEXT)
+h5stat_gentest_LDADD = $(LDADD)
+h5stat_gentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = h5stat.c h5stat_gentest.c
+DIST_SOURCES = h5stat.c h5stat_gentest.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/testh5stat.sh.in \
+	$(top_srcdir)/bin/depcomp $(top_srcdir)/bin/test-driver \
+	$(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src directory
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.  *.h5 are generated by h5repart_gentest.  They should
+# copied to the testfiles/ directory if update is required. fst_family*.h5
+# and scd_family*.h5 were created by setting the HDF5_NOCLEANUP variable.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 \
+	../testfiles/fst_family*.h5 ../testfiles/scd_family*.h5
+
+#test script and program
+TEST_PROG = h5stat_gentest
+TEST_SCRIPT = testh5stat.sh
+check_SCRIPTS = $(TEST_SCRIPT)
+SCRIPT_DEPEND = h5stat$(EXEEXT)
+bin_SCRIPTS = 
+
+# Add h5stat specific linker flags here
+h5stat_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# Tell automake to clean h5redeploy script
+CLEANFILES = 
+
+# These were generated by configure.  Remove them only when distclean.
+DISTCLEANFILES = testh5stat.sh
+
+# All programs rely on hdf5 library and h5tools library
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/h5stat/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/h5stat/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+testh5stat.sh: $(top_builddir)/config.status $(srcdir)/testh5stat.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+h5stat$(EXEEXT): $(h5stat_OBJECTS) $(h5stat_DEPENDENCIES) $(EXTRA_h5stat_DEPENDENCIES) 
+	@rm -f h5stat$(EXEEXT)
+	$(AM_V_CCLD)$(h5stat_LINK) $(h5stat_OBJECTS) $(h5stat_LDADD) $(LIBS)
+
+h5stat_gentest$(EXEEXT): $(h5stat_gentest_OBJECTS) $(h5stat_gentest_DEPENDENCIES) $(EXTRA_h5stat_gentest_DEPENDENCIES) 
+	@rm -f h5stat_gentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5stat_gentest_OBJECTS) $(h5stat_gentest_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5stat.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5stat_gentest.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5stat_gentest.log: h5stat_gentest$(EXEEXT)
+	@p='h5stat_gentest$(EXEEXT)'; \
+	b='h5stat_gentest'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-binSCRIPTS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
+	uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-binSCRIPTS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in
new file mode 100644
index 0000000..6d4c2fb
--- /dev/null
+++ b/tools/lib/Makefile.in
@@ -0,0 +1,1390 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1)
+TESTS = $(am__EXEEXT_1)
+subdir = tools/lib
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LTLIBRARIES = $(noinst_LTLIBRARIES)
+libh5tools_la_LIBADD =
+am_libh5tools_la_OBJECTS = h5tools.lo h5tools_dump.lo h5tools_str.lo \
+	h5tools_utils.lo h5diff.lo h5diff_array.lo h5diff_attr.lo \
+	h5diff_dset.lo h5diff_util.lo h5trav.lo h5tools_filters.lo \
+	h5tools_ref.lo h5tools_type.lo io_timer.lo
+libh5tools_la_OBJECTS = $(am_libh5tools_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am__EXEEXT_1 =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libh5tools_la_SOURCES)
+DIST_SOURCES = $(libh5tools_la_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include files in /src directory
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
+
+# This is our main target, the h5tools library.
+noinst_LTLIBRARIES = libh5tools.la
+libh5tools_la_SOURCES = h5tools.c h5tools_dump.c h5tools_str.c h5tools_utils.c h5diff.c \
+    h5diff_array.c h5diff_attr.c h5diff_dset.c h5diff_util.c h5trav.c  \
+    h5tools_filters.c h5tools_ref.c h5tools_type.c io_timer.c
+
+
+# Test program.  Link using libhdf5 and libh5tools
+TEST_PROG = 
+
+# Name libh5tools.la so that dependencies work out. Automake knows how
+# to build 'libh5tools.la', but not '../../tools/lib/libh5tools.la'.
+LDADD = libh5tools.la $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/lib/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/lib/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libh5tools.la: $(libh5tools_la_OBJECTS) $(libh5tools_la_DEPENDENCIES) $(EXTRA_libh5tools_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK)  $(libh5tools_la_OBJECTS) $(libh5tools_la_LIBADD) $(LIBS)
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_array.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_attr.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_dset.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5diff_util.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_dump.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_filters.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_ref.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_str.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_type.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5tools_utils.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5trav.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io_timer.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(LTLIBRARIES) all-local
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-local pdf pdf-am ps ps-am recheck tags tags-am \
+	uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in
new file mode 100644
index 0000000..9cb0305
--- /dev/null
+++ b/tools/misc/Makefile.in
@@ -0,0 +1,1731 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1) repart_test$(EXEEXT) \
+	clear_open_chk$(EXEEXT)
+bin_PROGRAMS = h5debug$(EXEEXT) h5repart$(EXEEXT) h5mkgrp$(EXEEXT) \
+	h5clear$(EXEEXT)
+noinst_PROGRAMS = h5clear_gentest$(EXEEXT)
+TESTS = $(am__EXEEXT_1) $(TEST_SCRIPT)
+subdir = tools/misc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES = h5cc testh5clear.sh testh5mkgrp.sh \
+	testh5repart.sh
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
+am__EXEEXT_1 = h5repart_gentest$(EXEEXT) talign$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+clear_open_chk_SOURCES = clear_open_chk.c
+clear_open_chk_OBJECTS = clear_open_chk.$(OBJEXT)
+clear_open_chk_LDADD = $(LDADD)
+clear_open_chk_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+h5clear_SOURCES = h5clear.c
+h5clear_OBJECTS = h5clear.$(OBJEXT)
+h5clear_LDADD = $(LDADD)
+h5clear_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5clear_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5clear_LDFLAGS) $(LDFLAGS) -o $@
+h5clear_gentest_SOURCES = h5clear_gentest.c
+h5clear_gentest_OBJECTS = h5clear_gentest.$(OBJEXT)
+h5clear_gentest_LDADD = $(LDADD)
+h5clear_gentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5debug_SOURCES = h5debug.c
+h5debug_OBJECTS = h5debug.$(OBJEXT)
+h5debug_LDADD = $(LDADD)
+h5debug_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5debug_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5debug_LDFLAGS) $(LDFLAGS) -o $@
+h5mkgrp_SOURCES = h5mkgrp.c
+h5mkgrp_OBJECTS = h5mkgrp.$(OBJEXT)
+h5mkgrp_LDADD = $(LDADD)
+h5mkgrp_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5mkgrp_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5mkgrp_LDFLAGS) $(LDFLAGS) -o $@
+h5repart_SOURCES = h5repart.c
+h5repart_OBJECTS = h5repart.$(OBJEXT)
+h5repart_LDADD = $(LDADD)
+h5repart_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+h5repart_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5repart_LDFLAGS) $(LDFLAGS) -o $@
+h5repart_gentest_SOURCES = h5repart_gentest.c
+h5repart_gentest_OBJECTS = h5repart_gentest.$(OBJEXT)
+h5repart_gentest_LDADD = $(LDADD)
+h5repart_gentest_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+repart_test_SOURCES = repart_test.c
+repart_test_OBJECTS = repart_test.$(OBJEXT)
+repart_test_LDADD = $(LDADD)
+repart_test_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+talign_SOURCES = talign.c
+talign_OBJECTS = talign.$(OBJEXT)
+talign_LDADD = $(LDADD)
+talign_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = clear_open_chk.c h5clear.c h5clear_gentest.c h5debug.c \
+	h5mkgrp.c h5repart.c h5repart_gentest.c repart_test.c talign.c
+DIST_SOURCES = clear_open_chk.c h5clear.c h5clear_gentest.c h5debug.c \
+	h5mkgrp.c h5repart.c h5repart_gentest.c repart_test.c talign.c
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	check recheck distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/h5cc.in \
+	$(srcdir)/testh5clear.sh.in $(srcdir)/testh5mkgrp.sh.in \
+	$(srcdir)/testh5repart.sh.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src directory
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.  *.h5 are generated by h5repart_gentest.  They should
+# copied to the testfiles/ directory if update is required. fst_family*.h5
+# and scd_family*.h5 were created by setting the HDF5_NOCLEANUP variable.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5 \
+	../testfiles/fst_family*.h5 ../testfiles/scd_family*.h5
+SUBDIRS = vds
+
+#test scripts and programs
+TEST_PROG = h5repart_gentest talign
+TEST_SCRIPT = testh5repart.sh testh5mkgrp.sh testh5clear.sh
+check_SCRIPTS = $(TEST_SCRIPT)
+SCRIPT_DEPEND = h5repart$(EXEEXT) h5mkgrp$(EXEEXT) h5clear$(EXEEXT)
+bin_SCRIPTS = h5redeploy
+
+# Add h5debug, h5repart, and h5mkgrp specific linker flags here
+h5debug_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+h5repart_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+h5mkgrp_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+h5clear_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# Tell automake to clean h5redeploy script
+CLEANFILES = h5redeploy
+
+# These were generated by configure.  Remove them only when distclean.
+DISTCLEANFILES = h5cc testh5repart.sh testh5clear.sh
+
+# All programs rely on hdf5 library and h5tools library
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+@BUILD_PARALLEL_CONDITIONAL_FALSE@H5CC_NAME = h5cc
+
+# h5cc needs custom install and uninstall rules, since it may be
+# named h5pcc if hdf5 is being built in parallel mode.
+@BUILD_PARALLEL_CONDITIONAL_TRUE@H5CC_NAME = h5pcc
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/misc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/misc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+h5cc: $(top_builddir)/config.status $(srcdir)/h5cc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testh5clear.sh: $(top_builddir)/config.status $(srcdir)/testh5clear.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testh5mkgrp.sh: $(top_builddir)/config.status $(srcdir)/testh5mkgrp.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+testh5repart.sh: $(top_builddir)/config.status $(srcdir)/testh5repart.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-noinstPROGRAMS:
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clear_open_chk$(EXEEXT): $(clear_open_chk_OBJECTS) $(clear_open_chk_DEPENDENCIES) $(EXTRA_clear_open_chk_DEPENDENCIES) 
+	@rm -f clear_open_chk$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(clear_open_chk_OBJECTS) $(clear_open_chk_LDADD) $(LIBS)
+
+h5clear$(EXEEXT): $(h5clear_OBJECTS) $(h5clear_DEPENDENCIES) $(EXTRA_h5clear_DEPENDENCIES) 
+	@rm -f h5clear$(EXEEXT)
+	$(AM_V_CCLD)$(h5clear_LINK) $(h5clear_OBJECTS) $(h5clear_LDADD) $(LIBS)
+
+h5clear_gentest$(EXEEXT): $(h5clear_gentest_OBJECTS) $(h5clear_gentest_DEPENDENCIES) $(EXTRA_h5clear_gentest_DEPENDENCIES) 
+	@rm -f h5clear_gentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5clear_gentest_OBJECTS) $(h5clear_gentest_LDADD) $(LIBS)
+
+h5debug$(EXEEXT): $(h5debug_OBJECTS) $(h5debug_DEPENDENCIES) $(EXTRA_h5debug_DEPENDENCIES) 
+	@rm -f h5debug$(EXEEXT)
+	$(AM_V_CCLD)$(h5debug_LINK) $(h5debug_OBJECTS) $(h5debug_LDADD) $(LIBS)
+
+h5mkgrp$(EXEEXT): $(h5mkgrp_OBJECTS) $(h5mkgrp_DEPENDENCIES) $(EXTRA_h5mkgrp_DEPENDENCIES) 
+	@rm -f h5mkgrp$(EXEEXT)
+	$(AM_V_CCLD)$(h5mkgrp_LINK) $(h5mkgrp_OBJECTS) $(h5mkgrp_LDADD) $(LIBS)
+
+h5repart$(EXEEXT): $(h5repart_OBJECTS) $(h5repart_DEPENDENCIES) $(EXTRA_h5repart_DEPENDENCIES) 
+	@rm -f h5repart$(EXEEXT)
+	$(AM_V_CCLD)$(h5repart_LINK) $(h5repart_OBJECTS) $(h5repart_LDADD) $(LIBS)
+
+h5repart_gentest$(EXEEXT): $(h5repart_gentest_OBJECTS) $(h5repart_gentest_DEPENDENCIES) $(EXTRA_h5repart_gentest_DEPENDENCIES) 
+	@rm -f h5repart_gentest$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(h5repart_gentest_OBJECTS) $(h5repart_gentest_LDADD) $(LIBS)
+
+repart_test$(EXEEXT): $(repart_test_OBJECTS) $(repart_test_DEPENDENCIES) $(EXTRA_repart_test_DEPENDENCIES) 
+	@rm -f repart_test$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(repart_test_OBJECTS) $(repart_test_LDADD) $(LIBS)
+
+talign$(EXEEXT): $(talign_OBJECTS) $(talign_DEPENDENCIES) $(EXTRA_talign_DEPENDENCIES) 
+	@rm -f talign$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(talign_OBJECTS) $(talign_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clear_open_chk.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5clear.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5clear_gentest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5debug.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5mkgrp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repart.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/h5repart_gentest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/repart_test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/talign.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS) $(check_SCRIPTS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+h5repart_gentest.log: h5repart_gentest$(EXEEXT)
+	@p='h5repart_gentest$(EXEEXT)'; \
+	b='h5repart_gentest'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+talign.log: talign$(EXEEXT)
+	@p='talign$(EXEEXT)'; \
+	b='talign'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(check_SCRIPTS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile $(PROGRAMS) $(SCRIPTS) all-local
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool clean-noinstPROGRAMS mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS \
+	install-exec-local
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+	uninstall-local
+
+.MAKE: $(am__recursive_targets) check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
+	check check-TESTS check-am clean clean-binPROGRAMS \
+	clean-checkPROGRAMS clean-generic clean-libtool \
+	clean-noinstPROGRAMS cscopelist-am ctags ctags-am distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-binPROGRAMS install-binSCRIPTS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-exec-local install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am \
+	recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-binSCRIPTS uninstall-local
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+install-exec-local:
+	@$(INSTALL) h5cc $(DESTDIR)$(bindir)/$(H5CC_NAME)
+uninstall-local:
+	@$(RM) $(DESTDIR)$(bindir)/$(H5CC_NAME)
+
+# How to build h5redeploy script
+h5redeploy: h5redeploy.in
+	@cp $(srcdir)/$@.in $@
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/misc/vds/Makefile.in b/tools/misc/vds/Makefile.in
new file mode 100644
index 0000000..c51b3d8
--- /dev/null
+++ b/tools/misc/vds/Makefile.in
@@ -0,0 +1,1436 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Makefile(.in)
+#
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1)
+TESTS = $(am__EXEEXT_1)
+subdir = tools/misc/vds
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__EXEEXT_1 = UC_1_one_dim_gen$(EXEEXT) UC_2_two_dims_gen$(EXEEXT) \
+	UC_3_gaps_gen$(EXEEXT) UC_4_printf_gen$(EXEEXT) \
+	UC_5_stride_gen$(EXEEXT)
+UC_1_one_dim_gen_SOURCES = UC_1_one_dim_gen.c
+UC_1_one_dim_gen_OBJECTS = UC_1_one_dim_gen.$(OBJEXT)
+UC_1_one_dim_gen_LDADD = $(LDADD)
+UC_1_one_dim_gen_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+UC_2_two_dims_gen_SOURCES = UC_2_two_dims_gen.c
+UC_2_two_dims_gen_OBJECTS = UC_2_two_dims_gen.$(OBJEXT)
+UC_2_two_dims_gen_LDADD = $(LDADD)
+UC_2_two_dims_gen_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+UC_3_gaps_gen_SOURCES = UC_3_gaps_gen.c
+UC_3_gaps_gen_OBJECTS = UC_3_gaps_gen.$(OBJEXT)
+UC_3_gaps_gen_LDADD = $(LDADD)
+UC_3_gaps_gen_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+UC_4_printf_gen_SOURCES = UC_4_printf_gen.c
+UC_4_printf_gen_OBJECTS = UC_4_printf_gen.$(OBJEXT)
+UC_4_printf_gen_LDADD = $(LDADD)
+UC_4_printf_gen_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+UC_5_stride_gen_SOURCES = UC_5_stride_gen.c
+UC_5_stride_gen_OBJECTS = UC_5_stride_gen.$(OBJEXT)
+UC_5_stride_gen_LDADD = $(LDADD)
+UC_5_stride_gen_DEPENDENCIES = $(LIBH5TOOLS) $(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = UC_1_one_dim_gen.c UC_2_two_dims_gen.c UC_3_gaps_gen.c \
+	UC_4_printf_gen.c UC_5_stride_gen.c
+DIST_SOURCES = UC_1_one_dim_gen.c UC_2_two_dims_gen.c UC_3_gaps_gen.c \
+	UC_4_printf_gen.c UC_5_stride_gen.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+
+# Include src directory
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+
+# Temporary files.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2 *.h5
+
+#test scripts and programs
+TEST_PROG = UC_1_one_dim_gen UC_2_two_dims_gen UC_3_gaps_gen UC_4_printf_gen \
+    UC_5_stride_gen
+
+
+# All programs rely on hdf5 library and h5tools library
+LDADD = $(LIBH5TOOLS) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/misc/vds/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/misc/vds/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+UC_1_one_dim_gen$(EXEEXT): $(UC_1_one_dim_gen_OBJECTS) $(UC_1_one_dim_gen_DEPENDENCIES) $(EXTRA_UC_1_one_dim_gen_DEPENDENCIES) 
+	@rm -f UC_1_one_dim_gen$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(UC_1_one_dim_gen_OBJECTS) $(UC_1_one_dim_gen_LDADD) $(LIBS)
+
+UC_2_two_dims_gen$(EXEEXT): $(UC_2_two_dims_gen_OBJECTS) $(UC_2_two_dims_gen_DEPENDENCIES) $(EXTRA_UC_2_two_dims_gen_DEPENDENCIES) 
+	@rm -f UC_2_two_dims_gen$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(UC_2_two_dims_gen_OBJECTS) $(UC_2_two_dims_gen_LDADD) $(LIBS)
+
+UC_3_gaps_gen$(EXEEXT): $(UC_3_gaps_gen_OBJECTS) $(UC_3_gaps_gen_DEPENDENCIES) $(EXTRA_UC_3_gaps_gen_DEPENDENCIES) 
+	@rm -f UC_3_gaps_gen$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(UC_3_gaps_gen_OBJECTS) $(UC_3_gaps_gen_LDADD) $(LIBS)
+
+UC_4_printf_gen$(EXEEXT): $(UC_4_printf_gen_OBJECTS) $(UC_4_printf_gen_DEPENDENCIES) $(EXTRA_UC_4_printf_gen_DEPENDENCIES) 
+	@rm -f UC_4_printf_gen$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(UC_4_printf_gen_OBJECTS) $(UC_4_printf_gen_LDADD) $(LIBS)
+
+UC_5_stride_gen$(EXEEXT): $(UC_5_stride_gen_OBJECTS) $(UC_5_stride_gen_DEPENDENCIES) $(EXTRA_UC_5_stride_gen_DEPENDENCIES) 
+	@rm -f UC_5_stride_gen$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(UC_5_stride_gen_OBJECTS) $(UC_5_stride_gen_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/UC_1_one_dim_gen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/UC_2_two_dims_gen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/UC_3_gaps_gen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/UC_4_printf_gen.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/UC_5_stride_gen.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+UC_1_one_dim_gen.log: UC_1_one_dim_gen$(EXEEXT)
+	@p='UC_1_one_dim_gen$(EXEEXT)'; \
+	b='UC_1_one_dim_gen'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+UC_2_two_dims_gen.log: UC_2_two_dims_gen$(EXEEXT)
+	@p='UC_2_two_dims_gen$(EXEEXT)'; \
+	b='UC_2_two_dims_gen'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+UC_3_gaps_gen.log: UC_3_gaps_gen$(EXEEXT)
+	@p='UC_3_gaps_gen$(EXEEXT)'; \
+	b='UC_3_gaps_gen'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+UC_4_printf_gen.log: UC_4_printf_gen$(EXEEXT)
+	@p='UC_4_printf_gen$(EXEEXT)'; \
+	b='UC_4_printf_gen'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+UC_5_stride_gen.log: UC_5_stride_gen$(EXEEXT)
+	@p='UC_5_stride_gen$(EXEEXT)'; \
+	b='UC_5_stride_gen'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile all-local
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-checkPROGRAMS clean-generic clean-libtool \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tools/perform/Makefile.in b/tools/perform/Makefile.in
new file mode 100644
index 0000000..4dddb29
--- /dev/null
+++ b/tools/perform/Makefile.in
@@ -0,0 +1,1561 @@
+# Makefile.in generated by automake 1.15 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2014 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# Copyright by The HDF Group.
+# Copyright by the Board of Trustees of the University of Illinois.
+# All rights reserved.
+#
+# This file is part of HDF5.  The full HDF5 copyright notice, including
+# terms governing use, modification, and redistribution, is contained in
+# the files COPYING and Copyright.html.  COPYING can be found at the root
+# of the source code distribution tree; Copyright.html can be found at the
+# root level of an installed copy of the electronic HDF5 document set and
+# is linked from the top-level documents page.  It can also be found at
+# http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
+# access to either file, you may request a copy from help@hdfgroup.org.
+#
+# HDF5 Library Performance Makefile(.in)
+#
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@BUILD_PARALLEL_CONDITIONAL_FALSE@bin_PROGRAMS =  \
+@BUILD_PARALLEL_CONDITIONAL_FALSE@	h5perf_serial$(EXEEXT)
+@BUILD_PARALLEL_CONDITIONAL_TRUE@bin_PROGRAMS =  \
+@BUILD_PARALLEL_CONDITIONAL_TRUE@	h5perf_serial$(EXEEXT) \
+@BUILD_PARALLEL_CONDITIONAL_TRUE@	h5perf$(EXEEXT)
+check_PROGRAMS = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
+	zip_perf$(EXEEXT) perf_meta$(EXEEXT) $(am__EXEEXT_2) \
+	perf$(EXEEXT)
+TESTS = $(am__EXEEXT_3)
+subdir = tools/perform
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal_cxx.m4 \
+	$(top_srcdir)/m4/aclocal_fc.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/src/H5config.h \
+	$(top_builddir)/fortran/src/H5config_f.inc
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+am__EXEEXT_1 =
+@BUILD_ALL_CONDITIONAL_TRUE@am__EXEEXT_2 = $(am__EXEEXT_1)
+PROGRAMS = $(bin_PROGRAMS)
+chunk_SOURCES = chunk.c
+chunk_OBJECTS = chunk.$(OBJEXT)
+chunk_LDADD = $(LDADD)
+chunk_DEPENDENCIES = $(LIBHDF5)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_h5perf_OBJECTS = pio_perf.$(OBJEXT) pio_engine.$(OBJEXT)
+h5perf_OBJECTS = $(am_h5perf_OBJECTS)
+h5perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5perf_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5perf_LDFLAGS) $(LDFLAGS) -o $@
+am_h5perf_serial_OBJECTS = sio_perf.$(OBJEXT) sio_engine.$(OBJEXT)
+h5perf_serial_OBJECTS = $(am_h5perf_serial_OBJECTS)
+h5perf_serial_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5perf_serial_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(h5perf_serial_LDFLAGS) $(LDFLAGS) -o $@
+iopipe_SOURCES = iopipe.c
+iopipe_OBJECTS = iopipe.$(OBJEXT)
+iopipe_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+overhead_SOURCES = overhead.c
+overhead_OBJECTS = overhead.$(OBJEXT)
+overhead_LDADD = $(LDADD)
+overhead_DEPENDENCIES = $(LIBHDF5)
+perf_SOURCES = perf.c
+perf_OBJECTS = perf.$(OBJEXT)
+perf_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+perf_meta_SOURCES = perf_meta.c
+perf_meta_OBJECTS = perf_meta.$(OBJEXT)
+perf_meta_DEPENDENCIES = $(LIBH5TEST) $(LIBHDF5)
+zip_perf_SOURCES = zip_perf.c
+zip_perf_OBJECTS = zip_perf.$(OBJEXT)
+zip_perf_DEPENDENCIES = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/src -I$(top_builddir)/fortran/src
+depcomp = $(SHELL) $(top_srcdir)/bin/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = chunk.c $(h5perf_SOURCES) $(h5perf_serial_SOURCES) iopipe.c \
+	overhead.c perf.c perf_meta.c zip_perf.c
+DIST_SOURCES = chunk.c $(h5perf_SOURCES) $(h5perf_serial_SOURCES) \
+	iopipe.c overhead.c perf.c perf_meta.c zip_perf.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+am__EXEEXT_3 = iopipe$(EXEEXT) chunk$(EXEEXT) overhead$(EXEEXT) \
+	zip_perf$(EXEEXT) perf_meta$(EXEEXT) h5perf_serial$(EXEEXT) \
+	$(am__EXEEXT_2)
+TEST_SUITE_LOG = test-suite.log
+LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.sh.log=.log)
+SH_LOG_DRIVER = $(SHELL) $(top_srcdir)/bin/test-driver
+SH_LOG_COMPILE = $(SH_LOG_COMPILER) $(AM_SH_LOG_FLAGS) $(SH_LOG_FLAGS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/bin/depcomp \
+	$(top_srcdir)/bin/test-driver $(top_srcdir)/config/commence.am \
+	$(top_srcdir)/config/conclude.am COPYING
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADD_PARALLEL_FILES = @ADD_PARALLEL_FILES@
+AMTAR = @AMTAR@
+
+# H5_CFLAGS holds flags that should be used when building hdf5,
+# but which should not be exported to h5cc for building other programs.
+# AM_CFLAGS is an automake construct which should be used by Makefiles 
+# instead of CFLAGS, as CFLAGS is reserved solely for the user to define.
+# This applies to FCFLAGS, CXXFLAGS, CPPFLAGS, and LDFLAGS as well.
+AM_CFLAGS = @AM_CFLAGS@ @H5_CFLAGS@
+AM_CPPFLAGS = @AM_CPPFLAGS@ @H5_CPPFLAGS@ -I$(top_srcdir)/src \
+	-I$(top_srcdir)/test -I$(top_srcdir)/tools/lib
+AM_CXXFLAGS = @AM_CXXFLAGS@ @H5_CXXFLAGS@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AM_FCFLAGS = @AM_FCFLAGS@ @H5_FCFLAGS@
+AM_LDFLAGS = @AM_LDFLAGS@ @H5_LDFLAGS@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BYTESEX = @BYTESEX@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_VERSION = @CC_VERSION@
+CFLAGS = @CFLAGS@
+CLEARFILEBUF = @CLEARFILEBUF@
+CODESTACK = @CODESTACK@
+CONFIG_DATE = @CONFIG_DATE@
+CONFIG_MODE = @CONFIG_MODE@
+CONFIG_USER = @CONFIG_USER@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CXX_VERSION = @CXX_VERSION@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_PKG = @DEBUG_PKG@
+DEFAULT_API_VERSION = @DEFAULT_API_VERSION@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DEPRECATED_SYMBOLS = @DEPRECATED_SYMBOLS@
+DIRECT_VFD = @DIRECT_VFD@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+EXTERNAL_FILTERS = @EXTERNAL_FILTERS@
+
+# Make sure that these variables are exported to the Makefiles
+F9XMODEXT = @F9XMODEXT@
+F9XMODFLAG = @F9XMODFLAG@
+F9XSUFFIXFLAG = @F9XSUFFIXFLAG@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FC_VERSION = @FC_VERSION@
+FGREP = @FGREP@
+FORTRAN_C_LONG_DOUBLE_IS_UNIQUE = @FORTRAN_C_LONG_DOUBLE_IS_UNIQUE@
+FORTRAN_HAVE_C_LONG_DOUBLE = @FORTRAN_HAVE_C_LONG_DOUBLE@
+FORTRAN_SIZEOF_LONG_DOUBLE = @FORTRAN_SIZEOF_LONG_DOUBLE@
+FSEARCH_DIRS = @FSEARCH_DIRS@
+Fortran_COMPILER_ID = @Fortran_COMPILER_ID@
+GREP = @GREP@
+H5CONFIG_F_IKIND = @H5CONFIG_F_IKIND@
+H5CONFIG_F_NUM_IKIND = @H5CONFIG_F_NUM_IKIND@
+H5CONFIG_F_NUM_RKIND = @H5CONFIG_F_NUM_RKIND@
+H5CONFIG_F_RKIND = @H5CONFIG_F_RKIND@
+H5CONFIG_F_RKIND_SIZEOF = @H5CONFIG_F_RKIND_SIZEOF@
+H5_CFLAGS = @H5_CFLAGS@
+H5_CPPFLAGS = @H5_CPPFLAGS@
+H5_CXXFLAGS = @H5_CXXFLAGS@
+H5_FCFLAGS = @H5_FCFLAGS@
+H5_FORTRAN_SHARED = @H5_FORTRAN_SHARED@
+H5_LDFLAGS = @H5_LDFLAGS@
+H5_VERSION = @H5_VERSION@
+HADDR_T = @HADDR_T@
+HAVE_DMALLOC = @HAVE_DMALLOC@
+HAVE_Fortran_INTEGER_SIZEOF_16 = @HAVE_Fortran_INTEGER_SIZEOF_16@
+HAVE_PTHREAD = @HAVE_PTHREAD@
+HDF5_HL = @HDF5_HL@
+HDF5_INTERFACES = @HDF5_INTERFACES@
+HDF_CXX = @HDF_CXX@
+HDF_FORTRAN = @HDF_FORTRAN@
+HID_T = @HID_T@
+HL = @HL@
+HL_FOR = @HL_FOR@
+HSIZE_T = @HSIZE_T@
+HSSIZE_T = @HSSIZE_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTRUMENT = @INSTRUMENT@
+INSTRUMENT_LIBRARY = @INSTRUMENT_LIBRARY@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LL_PATH = @LL_PATH@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_STATIC_EXEC = @LT_STATIC_EXEC@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MPE = @MPE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJECT_NAMELEN_DEFAULT_F = @OBJECT_NAMELEN_DEFAULT_F@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PAC_C_MAX_REAL_PRECISION = @PAC_C_MAX_REAL_PRECISION@
+PAC_FC_ALL_INTEGER_KINDS = @PAC_FC_ALL_INTEGER_KINDS@
+PAC_FC_ALL_INTEGER_KINDS_SIZEOF = @PAC_FC_ALL_INTEGER_KINDS_SIZEOF@
+PAC_FC_ALL_REAL_KINDS = @PAC_FC_ALL_REAL_KINDS@
+PAC_FC_ALL_REAL_KINDS_SIZEOF = @PAC_FC_ALL_REAL_KINDS_SIZEOF@
+PAC_FC_MAX_REAL_PRECISION = @PAC_FC_MAX_REAL_PRECISION@
+PAC_FORTRAN_NATIVE_DOUBLE_KIND = @PAC_FORTRAN_NATIVE_DOUBLE_KIND@
+PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF = @PAC_FORTRAN_NATIVE_DOUBLE_SIZEOF@
+PAC_FORTRAN_NATIVE_INTEGER_KIND = @PAC_FORTRAN_NATIVE_INTEGER_KIND@
+PAC_FORTRAN_NATIVE_INTEGER_SIZEOF = @PAC_FORTRAN_NATIVE_INTEGER_SIZEOF@
+PAC_FORTRAN_NATIVE_REAL_KIND = @PAC_FORTRAN_NATIVE_REAL_KIND@
+PAC_FORTRAN_NATIVE_REAL_SIZEOF = @PAC_FORTRAN_NATIVE_REAL_SIZEOF@
+PARALLEL = @PARALLEL@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+ROOT = @ROOT@
+RUNPARALLEL = @RUNPARALLEL@
+RUNSERIAL = @RUNSERIAL@
+R_INTEGER = @R_INTEGER@
+R_LARGE = @R_LARGE@
+SEARCH = @SEARCH@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SIZE_T = @SIZE_T@
+STATIC_EXEC = @STATIC_EXEC@
+STATIC_SHARED = @STATIC_SHARED@
+STRICT_FORMAT_CHECKS = @STRICT_FORMAT_CHECKS@
+STRIP = @STRIP@
+TESTPARALLEL = @TESTPARALLEL@
+THREADSAFE = @THREADSAFE@
+TIME = @TIME@
+TR = @TR@
+TRACE_API = @TRACE_API@
+UNAME_INFO = @UNAME_INFO@
+USE_FILTER_DEFLATE = @USE_FILTER_DEFLATE@
+USE_FILTER_SZIP = @USE_FILTER_SZIP@
+USINGMEMCHECKER = @USINGMEMCHECKER@
+VERSION = @VERSION@
+WORDS_BIGENDIAN = @WORDS_BIGENDIAN@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+
+# Install directories that automake doesn't know about
+docdir = $(exec_prefix)/doc
+dvidir = @dvidir@
+enable_shared = @enable_shared@
+enable_static = @enable_static@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+
+# Shell commands used in Makefiles
+RM = rm -f
+CP = cp
+
+# Some machines need a command to run executables; this is that command
+# so that our tests will run.
+# We use RUNEXEC instead of RUNSERIAL directly because it may be that
+# some tests need to be run with a different command.  Older versions
+# of the makefiles used the command
+# $(LIBTOOL) --mode=execute
+# in some directories, for instance.
+RUNEXEC = $(RUNSERIAL)
+
+# Libraries to link to while building
+LIBHDF5 = $(top_builddir)/src/libhdf5.la
+LIBH5TEST = $(top_builddir)/test/libh5test.la
+LIBH5F = $(top_builddir)/fortran/src/libhdf5_fortran.la
+LIBH5FTEST = $(top_builddir)/fortran/test/libh5test_fortran.la
+LIBH5CPP = $(top_builddir)/c++/src/libhdf5_cpp.la
+LIBH5TOOLS = $(top_builddir)/tools/lib/libh5tools.la
+LIBH5_HL = $(top_builddir)/hl/src/libhdf5_hl.la
+LIBH5F_HL = $(top_builddir)/hl/fortran/src/libhdf5hl_fortran.la
+LIBH5CPP_HL = $(top_builddir)/hl/c++/src/libhdf5_hl_cpp.la
+
+# Note that in svn revision 19400 the '/' after DESTDIR in H5* variables below  
+# has been removed. According to the official description of DESTDIR by Gnu at 
+# http://www.gnu.org/prep/standards/html_node/DESTDIR.html, DESTDIR is 
+# prepended to the normal and complete install path that it precedes for the 
+# purpose of installing in a temporary directory which is useful for building 
+# rpms and other packages.  The '/' after ${DESTDIR} will be followed by another 
+# '/' at the beginning of the normal install path.  When DESTDIR is empty the  
+# path then begins with '//', which is incorrect and causes problems at least for 
+# Cygwin.   
+
+# Scripts used to build examples
+# If only shared libraries have been installed, have h5cc build examples with
+# shared libraries instead of static libraries
+H5CC = ${DESTDIR}$(bindir)/h5cc
+H5CC_PP = ${DESTDIR}$(bindir)/h5pcc
+H5FC = ${DESTDIR}$(bindir)/h5fc
+H5FC_PP = ${DESTDIR}$(bindir)/h5pfc
+H5CPP = ${DESTDIR}$(bindir)/h5c++
+ACLOCAL_AMFLAGS = "-I m4"
+
+# The trace script; this is used on source files from the C library to
+# insert tracing macros.
+TRACE = perl $(top_srcdir)/bin/trace
+
+# .chkexe files are used to mark tests that have run successfully.
+# .chklog files are output from those tests.
+# *.clog and *.clog2 are from the MPE option.
+CHECK_CLEANFILES = *.chkexe *.chklog *.clog *.clog2
+
+# Add h5perf and h5perf_serial specific linker flags here
+h5perf_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+h5perf_serial_LDFLAGS = $(LT_STATIC_EXEC) $(AM_LDFLAGS)
+
+# Some programs are not built or run by default, but can be built by hand or by
+# specifying --enable-build-all at configure time.
+# Also, some of these programs should only be built in parallel.
+# Currently there is no such program.
+@BUILD_PARALLEL_CONDITIONAL_TRUE@PARA_BUILD_ALL = 
+@BUILD_ALL_CONDITIONAL_TRUE@BUILD_ALL_PROGS = $(PARA_BUILD_ALL)
+
+# Define programs that will be run in 'make check'
+# List them in the order they should be run.
+# Parallel test programs.
+@BUILD_PARALLEL_CONDITIONAL_TRUE@TEST_PROG_PARA = h5perf perf
+# Serial test programs.
+TEST_PROG = iopipe chunk overhead zip_perf perf_meta h5perf_serial $(BUILD_ALL_PROGS)
+h5perf_SOURCES = pio_perf.c pio_engine.c
+h5perf_serial_SOURCES = sio_perf.c sio_engine.c
+
+# These are the files that `make clean' (and derivatives) will remove from
+# this directory.
+CLEANFILES = *.h5 *.raw *.dat x-gnuplot perftest.out
+
+# All of the programs depend on the main hdf5 library, and some of them
+# depend on test or tools library.
+LDADD = $(LIBHDF5)
+h5perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+h5perf_serial_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+perf_LDADD = $(LIBH5TEST) $(LIBHDF5)
+iopipe_LDADD = $(LIBH5TEST) $(LIBHDF5)
+zip_perf_LDADD = $(LIBH5TOOLS) $(LIBH5TEST) $(LIBHDF5)
+perf_meta_LDADD = $(LIBH5TEST) $(LIBHDF5)
+
+# Automake needs to be taught how to build lib, progs, and tests targets.
+# These will be filled in automatically for the most part (e.g.,
+# lib_LIBRARIES are built for lib target), but EXTRA_LIB, EXTRA_PROG, and
+# EXTRA_TEST variables are supplied to allow the user to force targets to
+# be built at certain times. 
+LIB = $(lib_LIBRARIES) $(lib_LTLIBRARIES) $(noinst_LIBRARIES)                 \
+      $(noinst_LTLIBRARIES) $(check_LIBRARIES) $(check_LTLIBRARIES) $(EXTRA_LIB)
+
+PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS)   \
+        $(EXTRA_PROG)
+
+chk_TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) 
+TEST_EXTENSIONS = .sh
+SH_LOG_COMPILER = $(SHELL)
+AM_SH_LOG_FLAGS = 
+TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_)
+TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_)
+TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_)
+TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .log .o .obj .sh .sh$(EXEEXT) .trs
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/perform/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tools/perform/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+$(top_srcdir)/config/commence.am $(top_srcdir)/config/conclude.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+chunk$(EXEEXT): $(chunk_OBJECTS) $(chunk_DEPENDENCIES) $(EXTRA_chunk_DEPENDENCIES) 
+	@rm -f chunk$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(chunk_OBJECTS) $(chunk_LDADD) $(LIBS)
+
+h5perf$(EXEEXT): $(h5perf_OBJECTS) $(h5perf_DEPENDENCIES) $(EXTRA_h5perf_DEPENDENCIES) 
+	@rm -f h5perf$(EXEEXT)
+	$(AM_V_CCLD)$(h5perf_LINK) $(h5perf_OBJECTS) $(h5perf_LDADD) $(LIBS)
+
+h5perf_serial$(EXEEXT): $(h5perf_serial_OBJECTS) $(h5perf_serial_DEPENDENCIES) $(EXTRA_h5perf_serial_DEPENDENCIES) 
+	@rm -f h5perf_serial$(EXEEXT)
+	$(AM_V_CCLD)$(h5perf_serial_LINK) $(h5perf_serial_OBJECTS) $(h5perf_serial_LDADD) $(LIBS)
+
+iopipe$(EXEEXT): $(iopipe_OBJECTS) $(iopipe_DEPENDENCIES) $(EXTRA_iopipe_DEPENDENCIES) 
+	@rm -f iopipe$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(iopipe_OBJECTS) $(iopipe_LDADD) $(LIBS)
+
+overhead$(EXEEXT): $(overhead_OBJECTS) $(overhead_DEPENDENCIES) $(EXTRA_overhead_DEPENDENCIES) 
+	@rm -f overhead$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(overhead_OBJECTS) $(overhead_LDADD) $(LIBS)
+
+perf$(EXEEXT): $(perf_OBJECTS) $(perf_DEPENDENCIES) $(EXTRA_perf_DEPENDENCIES) 
+	@rm -f perf$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(perf_OBJECTS) $(perf_LDADD) $(LIBS)
+
+perf_meta$(EXEEXT): $(perf_meta_OBJECTS) $(perf_meta_DEPENDENCIES) $(EXTRA_perf_meta_DEPENDENCIES) 
+	@rm -f perf_meta$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(perf_meta_OBJECTS) $(perf_meta_LDADD) $(LIBS)
+
+zip_perf$(EXEEXT): $(zip_perf_OBJECTS) $(zip_perf_DEPENDENCIES) $(EXTRA_zip_perf_DEPENDENCIES) 
+	@rm -f zip_perf$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(zip_perf_OBJECTS) $(zip_perf_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chunk.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iopipe.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/overhead.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/perf.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/perf_meta.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pio_engine.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pio_perf.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sio_engine.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sio_perf.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/zip_perf.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+	  fi; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	elif test -n "$$redo_logs"; then \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
+	    else \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+	    fi; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
+	    else \
+	      color_start= color_end=; \
+	    fi; \
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+recheck: all $(check_PROGRAMS)
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+iopipe.log: iopipe$(EXEEXT)
+	@p='iopipe$(EXEEXT)'; \
+	b='iopipe'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+chunk.log: chunk$(EXEEXT)
+	@p='chunk$(EXEEXT)'; \
+	b='chunk'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+overhead.log: overhead$(EXEEXT)
+	@p='overhead$(EXEEXT)'; \
+	b='overhead'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+zip_perf.log: zip_perf$(EXEEXT)
+	@p='zip_perf$(EXEEXT)'; \
+	b='zip_perf'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+perf_meta.log: perf_meta$(EXEEXT)
+	@p='perf_meta$(EXEEXT)'; \
+	b='perf_meta'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+h5perf_serial.log: h5perf_serial$(EXEEXT)
+	@p='h5perf_serial$(EXEEXT)'; \
+	b='h5perf_serial'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.sh.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.sh$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(SH_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_SH_LOG_DRIVER_FLAGS) $(SH_LOG_DRIVER_FLAGS) -- $(SH_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am all-local check check-TESTS \
+	check-am clean clean-binPROGRAMS clean-checkPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+	pdf-am ps ps-am recheck tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# List all build rules defined by HDF5 Makefiles as "PHONY" targets here.
+# This tells the Makefiles that these targets are not files to be built but
+# commands that should be executed even if a file with the same name already
+# exists.
+.PHONY: build-check-clean build-check-p build-check-s build-lib build-progs \
+        build-tests check-clean check-install check-p check-s check-vfd \
+        install-doc lib progs tests uninstall-doc _exec_check-s _test help
+
+help:
+	@$(top_srcdir)/bin/makehelp
+
+# lib/progs/tests targets recurse into subdirectories. build-* targets
+# build files in this directory.
+build-lib: $(LIB)
+build-progs: $(LIB) $(PROGS)
+build-tests: $(LIB) $(PROGS) $(chk_TESTS)
+
+# General rule for recursive building targets.
+# BUILT_SOURCES contain targets that need to be built before anything else
+# in the directory (e.g., for Fortran type detection)
+lib progs tests check-s check-p :: $(BUILT_SOURCES)
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# General rule for recursive cleaning targets.  Like the rule above,
+# but doesn't require building BUILT_SOURCES.
+check-clean ::
+	@$(MAKE) $(AM_MAKEFLAGS) build-$@ || exit 1;
+	@for d in X $(SUBDIRS); do                                             \
+	    if test $$d != X && test $$d != .; then                           \
+	        (set -x; cd $$d && $(MAKE) $(AM_MAKEFLAGS) $@) || exit 1;     \
+	    fi;                                                               \
+	done
+
+# Tell Automake to build tests when the user types `make all' (this is
+# not its default behavior).  Also build EXTRA_LIB and EXTRA_PROG since
+# Automake won't build them automatically, either.
+all-local: $(EXTRA_LIB) $(EXTRA_PROG) $(chk_TESTS)
+
+# make install-doc doesn't do anything outside of doc directory, but
+# Makefiles should recognize it.
+# UPDATE: docs no longer reside in this build tree, so this target
+# is depreciated.
+install-doc uninstall-doc:
+	@echo "Nothing to be done."
+
+# clean up files generated by tests so they can be re-run.
+build-check-clean:
+	$(RM) -rf $(CHECK_CLEANFILES)
+
+# run check-clean whenever mostlyclean is run
+mostlyclean-local: build-check-clean
+
+# check-install is just a synonym for installcheck
+check-install: installcheck
+
+# Run each test in order, passing $(TEST_FLAGS) to the program.
+# Since tests are done in a shell loop, "make -i" does apply inside it.
+# Set HDF5_Make_Ignore to a non-blank string to ignore errors inside the loop.
+# The timestamps give a rough idea how much time the tests use.
+#
+# Note that targets in chk_TESTS (defined above) will be built when the user
+# types 'make tests' or 'make check', but only programs in TEST_PROG,
+# TEST_PROG_PARA, or TEST_SCRIPT will actually be executed.
+check-TESTS: test
+
+test _test:
+	@$(MAKE) build-check-s
+	@$(MAKE) build-check-p
+
+# Actual execution of check-s.
+build-check-s: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	   echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@$(MAKE) $(AM_MAKEFLAGS) _exec_check-s
+	@if test -n "$(TEST_PROG)$(TEST_SCRIPT)"; then      \
+	    echo "===Serial tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+_exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH)
+
+# The dummy.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \
+	   tname=$(@:.chkexe_=)$(EXEEXT);\
+	   log=$(@:.chkexe_=.chklog); \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log};\
+	      else \
+	         echo "Testing $(HDF5_DRIVER) $${tname} $(TEST_FLAGS)"; \
+	         echo "$(HDF5_DRIVER) $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(RUNEXEC) ./$${tname} $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $(@:.chkexe_=.chkexe) || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	fi
+
+# The dummysh.chkexe here prevents the target from being
+# empty if there are no tests in the current directory.
+# $${log} is the log file.
+# $${tname} is the name of test.
+$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_:
+	@if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \
+	   cmd=$(@:.chkexe_=);\
+	   tname=`basename $$cmd`;\
+	   chkname=`basename $(@:.chkexe_=.chkexe)`;\
+	   log=`basename $(@:.chkexe_=.chklog)`; \
+	   echo "============================"; \
+	   if $(top_srcdir)/bin/newer $${chkname} $$cmd $(SCRIPT_DEPEND); then \
+	      echo "No need to test $${tname} again."; \
+	   else \
+	      echo "============================" > $${log}; \
+	      if test "X$(FORTRAN_API)" = "Xyes"; then \
+	         echo "Fortran API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "Fortran API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      elif test "X$(CXX_API)" = "Xyes"; then \
+	         echo "C++ API: Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "C++ API: $${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      else \
+	         echo "Testing $${tname} $(TEST_FLAGS)"; \
+	         echo "$${tname} $(TEST_FLAGS) Test Log" >> $${log}; \
+	      fi; \
+	      echo "============================" >> $${log}; \
+	      RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)"           \
+	      srcdir="$(srcdir)" \
+	         $(TIME) $(SHELL) $$cmd $(TEST_FLAGS) >> $${log} 2>&1 \
+	         && touch $${chkname} || \
+	         (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \
+	         (cat $${log} && false) || exit 1; \
+	      echo "" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)" >> $${log}; \
+	      echo "============================" >> $${log}; \
+	      echo "Finished testing $${tname} $(TEST_FLAGS)"; \
+	      cat $${log}; \
+	   fi; \
+	   echo "============================"; \
+	fi
+
+# Actual execution of check-p.
+build-check-p: $(LIB) $(PROGS) $(chk_TESTS)
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	   echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` begin `date`==="; \
+	fi
+	@if test -n "$(TEST_PROG_PARA)"; then                                \
+	    echo "**** Hint ****";                                            \
+	    echo "Parallel test files reside in the current directory"        \
+	         "by default.";                                               \
+	    echo "Set HDF5_PARAPREFIX to use another directory. E.g.,";       \
+	    echo "    HDF5_PARAPREFIX=/PFS/user/me";                          \
+	    echo "    export HDF5_PARAPREFIX";                                \
+	    echo "    make check";                                            \
+	    echo "**** end of Hint ****";                                     \
+	fi
+	@for test in $(TEST_PROG_PARA) dummy; do                             \
+	   if test $$test != dummy; then                                      \
+	      $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ \
+	      RUNEXEC="$(RUNPARALLEL)" || exit 1; \
+	   fi;                                                                \
+	done
+	@for test in $(TEST_SCRIPT_PARA) dummy; do                           \
+	  if test $$test != dummy; then                                      \
+	    $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_ || exit 1; \
+	  fi;                                                                 \
+	done
+	@if test -n "$(TEST_PROG_PARA)$(TEST_SCRIPT_PARA)"; then      \
+	    echo "===Parallel tests in `echo ${PWD} | sed -e s:.*/::` ended `date`===";\
+	fi
+
+# Run test with different Virtual File Driver
+check-vfd: $(LIB) $(PROGS) $(chk_TESTS)
+	@for vfd in $(VFD_LIST) dummy; do                                     \
+	    if test $$vfd != dummy; then                                      \
+	        echo "============================";                          \
+	        echo "Testing Virtual File Driver $$vfd";                     \
+	        echo "============================";                          \
+	        $(MAKE) $(AM_MAKEFLAGS) check-clean || exit 1;                \
+	        HDF5_DRIVER=$$vfd $(MAKE) $(AM_MAKEFLAGS) check || exit 1;    \
+	    fi;                                                               \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: