diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/Makefile.in | 40 | ||||
| -rw-r--r-- | tools/gifconv/Makefile.in | 40 | ||||
| -rw-r--r-- | tools/h5diff/Makefile.in | 39 | ||||
| -rw-r--r-- | tools/h5dump/Makefile.in | 38 | ||||
| -rwxr-xr-x | tools/h5import/Makefile.in | 40 | ||||
| -rw-r--r-- | tools/h5jam/Makefile.in | 39 | ||||
| -rw-r--r-- | tools/h5ls/Makefile.in | 40 | ||||
| -rw-r--r-- | tools/h5repack/Makefile.in | 38 | ||||
| -rw-r--r-- | tools/lib/Makefile.in | 40 | ||||
| -rw-r--r-- | tools/misc/Makefile.in | 40 |
10 files changed, 151 insertions, 243 deletions
diff --git a/tools/Makefile.in b/tools/Makefile.in index a7c1ba9..ea80007 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -281,19 +281,9 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ - *.chksh *.logsh - +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +CHECK_CLEANFILES = *.chkexe *.chklog # All subdirectories SUBDIRS = lib h5dump h5diff h5ls misc gifconv h5import h5repack h5jam @@ -312,8 +302,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-recursive .SUFFIXES: @@ -701,7 +691,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -732,16 +722,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -758,8 +748,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -795,7 +785,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/gifconv/Makefile.in b/tools/gifconv/Makefile.in index 23d199a..24cdd44 100644 --- a/tools/gifconv/Makefile.in +++ b/tools/gifconv/Makefile.in @@ -304,19 +304,9 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ - *.chksh *.logsh - +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +CHECK_CLEANFILES = *.chkexe *.chklog # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -340,8 +330,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -702,7 +692,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -733,16 +723,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -759,8 +749,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -796,7 +786,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/h5diff/Makefile.in b/tools/h5diff/Makefile.in index 6e3fbea..6b19b3c 100644 --- a/tools/h5diff/Makefile.in +++ b/tools/h5diff/Makefile.in @@ -312,21 +312,12 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. # Temporary files. *.h5 are generated by h5diff. They should # be copied to the testfiles/ directory if update is required -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh *.h5 \ - expect_sorted actual_sorted +CHECK_CLEANFILES = *.chkexe *.chklog *.h5 expect_sorted actual_sorted # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -365,8 +356,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -739,7 +730,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -770,16 +761,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -796,8 +787,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -833,7 +824,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/h5dump/Makefile.in b/tools/h5dump/Makefile.in index b438350..2a822a1 100644 --- a/tools/h5dump/Makefile.in +++ b/tools/h5dump/Makefile.in @@ -305,20 +305,12 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. # Temporary files. *.h5 are generated by h5dumpgentest. They should # copied to the testfiles/ directory if update is required. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh *.h5 +CHECK_CLEANFILES = *.chkexe *.chklog *.h5 # Include files in /src directory and /tools/lib directory INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -346,8 +338,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -714,7 +706,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -745,16 +737,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -771,8 +763,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -808,7 +800,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/h5import/Makefile.in b/tools/h5import/Makefile.in index bd78a4c..72fde7d 100755 --- a/tools/h5import/Makefile.in +++ b/tools/h5import/Makefile.in @@ -305,19 +305,9 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ - *.chksh *.logsh - +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +CHECK_CLEANFILES = *.chkexe *.chklog # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -344,8 +334,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -709,7 +699,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -740,16 +730,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -766,8 +756,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -803,7 +793,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/h5jam/Makefile.in b/tools/h5jam/Makefile.in index afe795d..e79995d 100644 --- a/tools/h5jam/Makefile.in +++ b/tools/h5jam/Makefile.in @@ -300,21 +300,12 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. # Temporary files. *.h5 are generated by jamgentest. They should # copied to the testfiles/ directory if update is required. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh *.h5 \ - *.txt +CHECK_CLEANFILES = *.chkexe *.chklog *.h5 *.txt # # Copyright by the Board of Trustees of the University of Illinois. @@ -355,8 +346,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -735,7 +726,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -766,16 +757,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -792,8 +783,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -829,7 +820,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/h5ls/Makefile.in b/tools/h5ls/Makefile.in index 88291f9..625779a 100644 --- a/tools/h5ls/Makefile.in +++ b/tools/h5ls/Makefile.in @@ -298,19 +298,9 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ - *.chksh *.logsh - +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +CHECK_CLEANFILES = *.chkexe *.chklog # Include src and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/tools/lib @@ -336,8 +326,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -689,7 +679,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -720,16 +710,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -746,8 +736,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -783,7 +773,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/h5repack/Makefile.in b/tools/h5repack/Makefile.in index 7d2a9d1..bda6e9c 100644 --- a/tools/h5repack/Makefile.in +++ b/tools/h5repack/Makefile.in @@ -320,20 +320,12 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. # Temporary files. *.h5 are generated by h5repack. They should # copied to the testfiles/ directory if update is required. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh *.h5 +CHECK_CLEANFILES = *.chkexe *.chklog *.h5 # Include src, test, and tools/lib directories INCLUDES = -I$(top_srcdir)/src -I$(top_srcdir)/test -I$(top_srcdir)/tools/lib @@ -372,8 +364,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -764,7 +756,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -795,16 +787,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -821,8 +813,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -858,7 +850,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/lib/Makefile.in b/tools/lib/Makefile.in index 8d0d70a..a200619 100644 --- a/tools/lib/Makefile.in +++ b/tools/lib/Makefile.in @@ -302,19 +302,9 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) \ - *.chksh *.logsh - +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. +CHECK_CLEANFILES = *.chkexe *.chklog # Include files in /src directory INCLUDES = -I$(top_srcdir)/src @@ -353,8 +343,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -706,7 +696,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -737,16 +727,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -763,8 +753,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -800,7 +790,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false diff --git a/tools/misc/Makefile.in b/tools/misc/Makefile.in index 4f20c8d..2ffbd3a 100644 --- a/tools/misc/Makefile.in +++ b/tools/misc/Makefile.in @@ -324,22 +324,14 @@ H5CC_PP = $(bindir)/h5pcc H5FC = $(bindir)/h5fc H5FC_PP = $(bindir)/h5pfc -# .chkexe and .chksh files are used to mark tests that have run successfully. -# Serial tests create .log and .logsh files. It's important only to clean log -# files generated by HDF5's tests, because the .log suffix is used for -# other files (e.g., config.log)! -# On the other hand, it is very hard to specify the exact name of .chksh and -# .logsh files because some scripts live in the source tree, not the build -# tree. Thus, we clean all .logsh and .chksh files. +# .chkexe files are used to mark tests that have run successfully. +# .chklog files are output from those tests. # Temporary files. *.h5 are generated by h5repart_gentest. They should # copied to the testfiles/ directory if update is required. fst_family*.h5 # and scd_family*.h5 were created by setting the HDF5_NOCLEANUP variable. -CHECK_CLEANFILES = $(TEST_PROG_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.chkexe) \ - $(TEST_PROG_CHKEXE:.chkexe_=.log) \ - $(TEST_PROG_PARA_CHKEXE:.chkexe_=.log) *.chksh *.logsh *.h5 \ - ../testfiles/fst_family*.h5 ../testfiles/scd_family*.h5 +CHECK_CLEANFILES = *.chkexe *.chklog *.h5 ../testfiles/fst_family*.h5 \ + ../testfiles/scd_family*.h5 # Include src directory INCLUDES = -I$(top_srcdir)/src @@ -381,8 +373,8 @@ PROGS = $(bin_PROGRAMS) $(bin_SCRIPTS) $(noinst_PROGRAMS) $(noinst_SCRIPTS) \ TESTS = $(check_PROGRAMS) $(check_SCRIPTS) $(EXTRA_TEST) TEST_PROG_CHKEXE = $(TEST_PROG:=.chkexe_) TEST_PROG_PARA_CHKEXE = $(TEST_PROG_PARA:=.chkexe_) -TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chksh_) -TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chksh_) +TEST_SCRIPT_CHKSH = $(TEST_SCRIPT:=.chkexe_) +TEST_SCRIPT_PARA_CHKSH = $(TEST_SCRIPT_PARA:=.chkexe_) all: all-am .SUFFIXES: @@ -796,7 +788,7 @@ _exec_check-s: $(TEST_PROG_CHKEXE) $(TEST_SCRIPT_CHKSH) $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummy.chkexe_"; then \ tname=$(@:.chkexe_=)$(EXEEXT);\ - log=$(@:.chkexe_=.log); \ + log=$(@:.chkexe_=.chklog); \ echo "============================"; \ if $(top_srcdir)/bin/newer $(@:.chkexe_=.chkexe) $${tname}; then \ echo "No need to test $${tname} again."; \ @@ -827,16 +819,16 @@ $(TEST_PROG_CHKEXE) $(TEST_PROG_PARA_CHKEXE) dummy.chkexe_: echo "============================"; \ fi -# The dummy.chksh here prevents the target from being +# The dummysh.chkexe here prevents the target from being # empty if there are no tests in the current directory. # $${log} is the log file. # $${tname} is the name of test. -$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: - @if test "X$@" != "X.chksh_" && test "X$@" != "Xdummy.chksh_"; then \ - tname=`basename $(@:.chksh_=)`;\ - log=`basename $(@:.chksh_=.logsh)`; \ +$(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummysh.chkexe_: + @if test "X$@" != "X.chkexe_" && test "X$@" != "Xdummysh.chkexe_"; then \ + tname=`basename $(@:.chkexe_=)`;\ + log=`basename $(@:.chkexe_=.chklog)`; \ echo "============================"; \ - if $(top_srcdir)/bin/newer `basename $(@:.chksh_=.chksh)` $(@:.chksh_=); then \ + if $(top_srcdir)/bin/newer `basename $(@:.chkexe_=.chkexe)` $(@:.chkexe_=); then \ echo "No need to test $${tname} again."; \ else \ echo "============================" > $${log}; \ @@ -853,8 +845,8 @@ $(TEST_SCRIPT_CHKSH) $(TEST_SCRIPT_PARA_CHKSH) dummy.chksh_: echo "============================" >> $${log}; \ RUNSERIAL="$(RUNSERIAL)" RUNPARALLEL="$(RUNPARALLEL)" \ srcdir="$(srcdir)" \ - $(SHELL) $(@:.chksh_=) $(TEST_FLAGS) >> $${log} 2>&1 \ - && touch `basename $(@:.chksh_=.chksh)` || \ + $(SHELL) $(@:.chkexe_=) $(TEST_FLAGS) >> $${log} 2>&1 \ + && touch `basename $(@:.chkexe_=.chkexe)` || \ (test $$HDF5_Make_Ignore && echo "*** Error ignored") || \ (cat $${log} && false) || exit 1; \ echo "" >> $${log}; \ @@ -890,7 +882,7 @@ build-check-p: $(LIB) $(PROGS) $(TESTS) test $$test = dummy || false @for test in $(TEST_SCRIPT_PARA) dummy; do \ if test $$test != dummy; then \ - $(MAKE) $(AM_MAKEFLAGS) $$test.chksh_; \ + $(MAKE) $(AM_MAKEFLAGS) $$test.chkexe_; \ fi; \ done; \ test $$test = dummy || false |