diff options
Diffstat (limited to 'vms/tools/h5dump/check_h5dump.com')
-rw-r--r-- | vms/tools/h5dump/check_h5dump.com | 353 |
1 files changed, 0 insertions, 353 deletions
diff --git a/vms/tools/h5dump/check_h5dump.com b/vms/tools/h5dump/check_h5dump.com deleted file mode 100644 index 2c34731..0000000 --- a/vms/tools/h5dump/check_h5dump.com +++ /dev/null @@ -1,353 +0,0 @@ -$!# -$!# Copyright by The HDF Group. -$!# Copyright by the Board of Trustees of the University of Illinois. -$!# All rights reserved. -$!# -$!# This file is part of HDF5. The full HDF5 copyright notice, including -$!# terms governing use, modification, and redistribution, is contained in -$!# the files COPYING and Copyright.html. COPYING can be found at the root -$!# of the source code distribution tree; Copyright.html can be found at the -$!# root level of an installed copy of the electronic HDF5 document set and -$!# is linked from the top-level documents page. It can also be found at -$!# http://hdfgroup.org/HDF5/doc/Copyright.html. If you do not have -$!# access to either file, you may request a copy from help@hdfgroup.org. -$!# -$ ! -$ ! This command file tests h5dump utility. The command file has to -$ ! run in the [hdf5-top.tools.testfiles] directory. -$ ! -$ type sys$input - -=================================== - Testing h5dump utiltity -=================================== - -$ -$ ! -$ ! Define h5dump symbol -$ ! -$! set message/notext/nofacility/noidentification/noseverity -$ current_dir = F$DIRECTRY() -$ len = F$LENGTH(current_dir) -$ temp = F$EXTRACT(0, len-10, current_dir) -$ h5dump_dir = temp + "H5DUMP]" -$ h5dump :== $sys$disk:'h5dump_dir'h5dump.exe -$ ! -$ ! h5dump tests -$ ! -$ -$ -$ -$ ! Test for displaying groups -$ CALL TOOLTEST tgroup-1.ddl "tgroup.h5" -$ ! Test for displaying the selected groups -$ CALL TOOLTEST tgroup-2.ddl "--group=/g2 --group / -g /y tgroup.h5" -$ ! Test for displaying simple space datasets -$ CALL TOOLTEST tdset-1.ddl "tdset.h5" -$ ! Test for displaying selected datasets -$ CALL TOOLTEST tdset-2.ddl "-"""H""" -d dset1 -d /dset2 --dataset=dset3 tdset.h5" -$ ! Test for displaying attributes -$ CALL TOOLTEST tattr-1.ddl "tattr.h5" -$ ! Test for displaying the selected attributes of string type and scalar space -$ CALL TOOLTEST tattr-2.ddl "-a /attr1 --attribute /attr4 --attribute=/attr5 tattr.h5" -$ ! Test for header and error messages -$ CALL TOOLTEST tattr-3.ddl "--header -a /attr2 --attribute=/attr tattr.h5" -$ ! Test for displaying attributes in shared datatype (also in group and dataset) -$ CALL TOOLTEST tnamed_dtype_attr.ddl "tnamed_dtype_attr.h5" -$ -$ ! Test for displaying soft links -$ CALL TOOLTEST tslink-1.ddl "tslink.h5" -$ ! Test for displaying the selected link -$ CALL TOOLTEST tslink-2.ddl "-l slink2 tslink.h5" -$ -$ ! Tests for hard links -$ CALL TOOLTEST thlink-1.ddl "thlink.h5" -$ CALL TOOLTEST thlink-2.ddl "-d /g1/dset2 --dataset /dset1 --dataset=/g1/g1.1/dset3 thlink.h5" -$ CALL TOOLTEST thlink-3.ddl "-d /g1/g1.1/dset3 --dataset /g1/dset2 --dataset=/dset1 thlink.h5" -$ CALL TOOLTEST thlink-4.ddl "-g /g1 thlink.h5" -$ CALL TOOLTEST thlink-5.ddl "-d /dset1 -g /g2 -d /g1/dset2 thlink.h5" -$ -$ ! Tests for compound data types -$ CALL TOOLTEST tcomp-1.ddl "tcompound.h5" -$ ! test for named data types -$ CALL TOOLTEST tcomp-2.ddl "-t /type1 --datatype /type2 --datatype=/group1/type3 tcompound.h5" -$ ! Test for unamed type -$ CALL TOOLTEST tcomp-3.ddl "-t /#6632 -g /group2 tcompound.h5" -$ ! Test complicated compound datatype -$ CALL TOOLTEST tcomp-4.ddl "tcompound_complex.h5" -$ -$ ! Test for the nested compound type -$ CALL TOOLTEST tnestcomp-1.ddl "tnestedcomp.h5" -$ -$ ! test for options -$ CALL TOOLTEST tall-1.ddl "tall.h5" -$ CALL TOOLTEST tall-2.ddl "--header -g /g1/g1.1 -a attr2 tall.h5" -$ CALL TOOLTEST tall-3.ddl "-d /g2/dset2.1 -l /g1/g1.2/g1.2.1/slink tall.h5" -$ -$ ! Test for loop detection -$ CALL TOOLTEST tloop-1.ddl "tloop.h5" -$ -$ ! Test for string -$ CALL TOOLTEST tstr-1.ddl "tstr.h5" -$ CALL TOOLTEST tstr-2.ddl "tstr2.h5" -$ -$ ! Test for file created by Lib SAF team -$ CALL TOOLTEST tsaf.ddl "tsaf.h5" -$ -$ ! Test for file with variable length data -$ CALL TOOLTEST tvldtypes1.ddl "tvldtypes1.h5" -$ CALL TOOLTEST tvldtypes2.ddl "tvldtypes2.h5" -$ CALL TOOLTEST tvldtypes3.ddl "tvldtypes3.h5" -$ CALL TOOLTEST tvldtypes4.ddl "tvldtypes4.h5" -$ CALL TOOLTEST tvldtypes5.ddl "tvldtypes5.h5" -$ -$ ! Test for file with variable length string data -$ CALL TOOLTEST tvlstr.ddl "tvlstr.h5" -$ -$ ! Test for files with array data -$ CALL TOOLTEST tarray1.ddl "tarray1.h5" -$ CALL TOOLTEST tarray2.ddl "tarray2.h5" -$ CALL TOOLTEST tarray3.ddl "tarray3.h5" -$ CALL TOOLTEST tarray4.ddl "tarray4.h5" -$ CALL TOOLTEST tarray5.ddl "tarray5.h5" -$ CALL TOOLTEST tarray6.ddl "tarray6.h5" -$ CALL TOOLTEST tarray7.ddl "tarray7.h5" -$ -$ ! Test for files with empty data -$ CALL TOOLTEST tempty.ddl "tempty.h5" -$ -$ ! Test for files with groups that have comments -$ CALL TOOLTEST tgrp_comments.ddl "tgrp_comments.h5" -$ -$ ! Test the --filedriver flag -$ CALL TOOLTEST tsplit_file.ddl "--filedriver=split tsplit_file" -$ CALL TOOLTEST tfamily.ddl "--filedriver=family tfamily%05d.h5" -$ CALL TOOLTEST tmulti.ddl "--filedriver=multi tmulti" -$ -$ ! Test for files with group names which reach > 1024 bytes in size -$ CALL TOOLTEST tlarge_objname.ddl "-w157 tlarge_objname.h5" -$ -$ ! Test '-A' to suppress data but print attr's -$ CALL TOOLTEST tall-2A.ddl "-"""A""" tall.h5" -$ -$ ! Test '-r' to print attributes in ASCII instead of decimal -$ CALL TOOLTEST tall-2B.ddl "-"""A""" -r tall.h5" -$ -$ ! Test Subsetting -$ CALL TOOLTEST tall-4s.ddl "--dataset=/g1/g1.1/dset1.1.1 --start=1,1 --stride=2,3 --count=3,2 --block=1,1 tall.h5" -$ CALL TOOLTEST tall-5s.ddl "-d /g1/g1.1/dset1.1.2[0;2;10;] tall.h5" -$ CALL TOOLTEST tdset-3s.ddl "-d /dset1[1,1;;;] tdset.h5" -$! CALL TOOLTEST tdset-3s.ddl "-d """/"dset"1[;3,2;4,4;1,4]""" tdset2.h5" -$ -$ ! Test printing characters in ASCII instead of decimal -$ CALL TOOLTEST tchar1.ddl "-r tchar.h5" -$ -$ ! Test failure handling -$ ! Missing file name -$ CALL TOOLTEST "tnofilename.ddl" -$ -$ ! rev. 2004 -$ -$ ! Tests for super block -$ CALL TOOLTEST tboot1.ddl "-"""H""" -"""B""" -d dset tfcontents1.h5" -$ CALL TOOLTEST tboot2.ddl "-"""B""" tfcontents2.h5" -$ -$ ! Test -p with a non existing dataset -$ CALL TOOLTEST tperror.ddl "-p -d bogus tfcontents1.h5" -$ -$ ! Test for file contents -$ CALL TOOLTEST tcontents.ddl "-n tfcontents1.h5" -$ -$ ! Tests for storage layout -$ ! Compact -$ CALL TOOLTEST tcompact.ddl "-"""H""" -p -d compact tfilters.h5" -$ ! Contiguous -$ CALL TOOLTEST tcontiguos.ddl "-"""H""" -p -d contiguous tfilters.h5" -$ ! Chunked -$ CALL TOOLTEST tchunked.ddl "-"""H""" -p -d chunked tfilters.h5" -$ ! External -$ CALL TOOLTEST texternal.ddl "-"""H""" -p -d external tfilters.h5" -$ -$ ! Fill values -$ CALL TOOLTEST tfill.ddl "-p tfvalues.h5" -$ -$ ! Several datatype, with references , print path -$ CALL TOOLTEST treference.ddl "tattr2.h5" -$ -$ ! Escape/not escape non printable characters -$ CALL TOOLTEST tstringe.ddl "-e tstr3.h5" -$ CALL TOOLTEST tstring.ddl "tstr3.h5" -$ ! Char data as ASCII with non escape -$ CALL TOOLTEST tstring2.ddl "-r -d str4 tstr3.h5" -$ -$ ! Array indices print/not print -$ CALL TOOLTEST tindicesyes.ddl "taindices.h5" -$ CALL TOOLTEST tindicesno.ddl "-y taindices.h5" -$ ! User defined -$ CALL TOOLTEST tuserfilter.ddl "-"""H""" -p -d myfilter tfilters.h5" -$ -$ ! Test for displaying dataset and attribute of null space -$ CALL TOOLTEST tnullspace.ddl "tnullspace.h5" -$ -$ ! Test for displaying objects with very long names -$ !CALL TOOLTEST tlonglinks.ddl "tlonglinks.h5" -$ -$ ! Test for long double (some systems do not have long double) -$ ! CALL TOOLTEST tldouble.ddl "tldouble.h5" -$ -$ ! Test for vms -$ CALL TOOLTEST tvms.ddl "tvms.h5" -$ -$ !test for binary output -$ CALL TOOLTEST1 tbin1.ddl "-d integer -o out1.bin -b """LE""" tbinary.h5" -$ CALL TOOLTEST1 tbin2.ddl "-d float -o out2.bin -b """BE""" tbinary.h5" -$ CALL TOOLTEST1 tbin4.ddl "-d double -o out4.bin -b """FILE""" tbinary.h5" -$ -$ ! Test for dataset region references -$ CALL TOOLTEST tdatareg.ddl "tdatareg.h5" -$ -$ ! tests for group creation order "1" tracked, "2" name, root tracked -$ CALL TOOLTEST tordergr1.ddl "--group=1 --sort_by=creation_order --sort_order=ascending tordergr.h5" -$ CALL TOOLTEST tordergr2.ddl "--group=1 --sort_by=creation_order --sort_order=descending tordergr.h5" -$ CALL TOOLTEST tordergr3.ddl "-g 2 -q name -z ascending tordergr.h5" -$ CALL TOOLTEST tordergr4.ddl "-g 2 -q name -z descending tordergr.h5" -$ CALL TOOLTEST tordergr5.ddl "-q creation_order tordergr.h5" -$ -$ ! Tests for attribute order -$ CALL TOOLTEST torderattr1.ddl "-"""H""" --sort_by=name --sort_order=ascending torderattr.h5" -$ CALL TOOLTEST torderattr2.ddl "-"""H""" --sort_by=name --sort_order=descending torderattr.h5" -$ CALL TOOLTEST torderattr3.ddl "-"""H""" --sort_by=creation_order --sort_order=ascending torderattr.h5" -$ CALL TOOLTEST torderattr4.ddl "-"""H""" --sort_by=creation_order --sort_order=descending torderattr.h5" -$ ! -$TOOLTEST: SUBROUTINE -$ -$ len = F$LENGTH(P1) -$ base = F$EXTRACT(0,len-3,P1) -$ actual = base + "h5dumpout" -$ actual_err = base + "h5dumperr" -$ -$ begin = "Testing h5dump " -$ ! -$ ! Run the test and save output in the 'actual' file -$ ! -$ -$ define/nolog sys$output 'actual' -$ define/nolog sys$error 'actual_err' -$ write sys$output "#############################" -$ write sys$output "Expected output for 'h5dump ''P2''" -$ write sys$output "#############################" -$ ON ERROR THEN CONTINUE -$ h5dump 'P2 -$ deassign sys$output -$ deassign sys$error -$ if F$SEARCH(actual_err) .NES. "" -$ then -$ set message/notext/nofacility/noidentification/noseverity -$ append 'actual_err' 'actual' -$ set message/text/facility/identification/severity -$ endif -$ ! -$ ! Compare the results -$ ! -$ diff/output=h5dump_temp/ignore=(spacing,trailing_spaces,blank_lines) 'actual' 'P1' -$ open/read temp_out h5dump_temp.dif -$ read temp_out record1 -$ close temp_out -$ ! -$ ! Extract error code and format output line -$ ! -$ len = F$LENGTH(record1) -$ err_code = F$EXTRACT(len-1,1,record1) -$ if err_code .eqs. "0" -$ then -$ result = "PASSED" -$ line = F$FAO("!15AS !50AS !70AS", begin, P2, result) -$ else -$ result = "*FAILED*" -$ line = F$FAO("!15AS !49AS !69AS", begin, P2, result) -$ endif -$ ! -$ ! Print test result -$ ! -$ write sys$output line -$ ! -$ ! Append the result to the log file -$ ! -$ append/new_version h5dump_temp.dif h5dump.log -$ append/new_version 'actual' h5dump_output.txt -$ ! -$ ! Delete temporary files -$ ! -$ if F$SEARCH(actual_err) .NES. "" -$ then -$ del *.h5dumperr;* -$ endif -$ del *.h5dumpout;* -$ del h5dump_temp.dif;* -$ ! -$ENDSUBROUTINE -$ -$TOOLTEST1: SUBROUTINE -$ -$ len = F$LENGTH(P1) -$ base = F$EXTRACT(0,len-3,P1) -$ actual = base + "h5dumpout" -$ actual_err = base + "h5dumperr" -$ -$ begin = "Testing h5dump " -$ ! -$ ! Run the test and save output in the 'actual' file -$ ! -$ define/nolog sys$output 'actual' -$ define/nolog sys$error 'actual_err' -$ ON ERROR THEN CONTINUE -$ h5dump 'P2 -$ deassign sys$output -$ deassign sys$error -$ if F$SEARCH(actual_err) .NES. "" -$ then -$ set message/notext/nofacility/noidentification/noseverity -$ append 'actual_err' 'actual' -$ set message/text/facility/identification/severity -$ endif -$ ! -$ ! Compare the results -$ ! -$ diff/output=h5dump_temp/ignore=(spacing,trailing_spaces,blank_lines) 'actual' 'P1' -$ open/read temp_out h5dump_temp.dif -$ read temp_out record1 -$ close temp_out -$ ! -$ ! Extract error code and format output line -$ ! -$ len = F$LENGTH(record1) -$ err_code = F$EXTRACT(len-1,1,record1) -$ if err_code .eqs. "0" -$ then -$ result = "PASSED" -$ line = F$FAO("!15AS !50AS !70AS", begin, P2, result) -$ else -$ result = "*FAILED*" -$ line = F$FAO("!15AS !49AS !69AS", begin, P2, result) -$ endif -$ ! -$ ! Print test result -$ ! -$ write sys$output line -$ ! -$ ! Append the result to the log file -$ ! -$ append/new_version h5dump_temp.dif h5dump.log -$ append/new_version 'actual' h5dump_output.txt -$ ! -$ ! Delete temporary files -$ ! -$ if F$SEARCH(actual_err) .NES. "" -$ then -$ del *.h5dumperr;* -$ endif -$ del *.h5dumpout;* -$ del h5dump_temp.dif;* -$ ! -$ENDSUBROUTINE - |