summaryrefslogtreecommitdiffstats
path: root/vms/tools
diff options
context:
space:
mode:
Diffstat (limited to 'vms/tools')
-rw-r--r--vms/tools/h5repack/check_h5repack.com171
-rw-r--r--vms/tools/h5repack/make.com2
2 files changed, 172 insertions, 1 deletions
diff --git a/vms/tools/h5repack/check_h5repack.com b/vms/tools/h5repack/check_h5repack.com
new file mode 100644
index 0000000..c482012
--- /dev/null
+++ b/vms/tools/h5repack/check_h5repack.com
@@ -0,0 +1,171 @@
+$!#
+$!# Copyright by the Board of Trustees of the University of Illinois.
+$!# All rights reserved.
+$!#
+$!# This file is part of HDF5. The full HDF5 copyright notice, including
+$!# terms governing use, modification, and redistribution, is contained in
+$!# the files COPYING and Copyright.html. COPYING can be found at the root
+$!# of the source code distribution tree; Copyright.html can be found at the
+$!# root level of an installed copy of the electronic HDF5 document set and
+$!# is linked from the top-level documents page. It can also be found at
+$!# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have
+$!# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu.
+$!#
+$!
+$ !
+$ ! This command file tests h5repack utility. The command file has to
+$ ! run in the [hdf5-top.tools.testfiles] directory.
+$ !
+$ !
+$ ! Define h5repack and h5diff symbols
+$ !
+$! set message/notext/nofacility/noidentification/noseverity
+$ current_dir = F$DIRECTRY()
+$ len = F$LENGTH(current_dir)
+$ temp = F$EXTRACT(0, len-10, current_dir)
+$ h5diff_dir = temp + "H5DIFF]"
+$ h5diff :== $sys$disk:'h5diff_dir'h5diff.exe
+$ h5repack_dir = temp + "H5REPACK]"
+$ h5repack :== $sys$disk:'h5repack_dir'h5repack.exe
+$ !
+$ !
+$ ! h5repack tests
+$ !
+$
+
+$!# copy files (these files have no filters)
+$ CALL TOOLTEST test0.h5
+$ CALL TOOLTEST test1.h5
+$ CALL TOOLTEST test2.h5
+$ CALL TOOLTEST test3.h5
+$ CALL TOOLTEST test4.h5
+$ CALL TOOLTEST test5.h5
+$
+$ # use test4.h5 to write some filters (this file has no filters)
+$
+$! # gzip with individual object
+$ CALL TOOLTEST test4.h5 "-f dset1:""GZIP""=1 -l dset1:""CHUNK""=20x10"
+$
+$! # gzip for all
+$ CALL TOOLTEST test4.h5 "-f ""GZIP""=1"
+$!
+$! # shuffle with individual object
+$ CALL TOOLTEST test4.h5 "-f dset2:""SHUF"" -l dset2:""CHUNK""=20x10"
+$!
+$!
+$! # shuffle for all
+$ CALL TOOLTEST test4.h5 "-f """HUF"""
+$!
+$! # fletcher32 with individual object
+$ CALL TOOLTEST test4.h5 "-f dset2:""FLET"" -l dset2:""CHUNK""=20x10"
+$!
+$! # fletcher32 for all
+$ CALL TOOLTEST test4.h5 "-f ""FLET"""
+$
+$! ###########################################################
+$! # the following tests assume the input files have filters
+$! ###########################################################
+$!
+$! # deflate copy
+$ CALL TOOLTEST test_deflate.h5
+$!
+$! # deflate remove
+$ CALL TOOLTEST test_deflate.h5 "-f dset_deflate:""NONE"""
+$!
+$! # shuffle copy
+$ CALL TOOLTEST test_shuffle.h5
+$!
+$! # shuffle remove
+$ CALL TOOLTEST test_shuffle.h5 "-f dset_shuffle:""NONE"""
+$!
+$! # fletcher32 copy
+$ CALL TOOLTEST test_fletcher32.h5
+$!
+$! # fletcher32 remove
+$ CALL TOOLTEST test_fletcher32.h5 "-f dset_fletcher32:""NONE"""
+$!
+$! # nbit copy
+$ CALL TOOLTEST test_nbit.h5
+$!
+$! # nbit remove
+$ CALL TOOLTEST test_nbit.h5 "-f dset_nbit:""NONE"""
+$!
+$! # nbit add
+$ CALL TOOLTEST test_nbit.h5 "-f dset_int31:""NBIT"""
+$!
+$! # scaleoffset add
+$ CALL TOOLTEST test_scaleoffset.h5 "-f dset_none:""S""+""O""=31"
+$!
+$! # scaleoffset copy
+$ CALL TOOLTEST test_scaleoffset.h5
+$!
+$! # scaleoffset remove
+$ CALL TOOLTEST test_scaleoffset.h5 "-f dset_scaleoffset:""NONE"""
+$!
+$! #limit
+$ CALL TOOLTEST test4.h5 "-f ""GZIP""=1 -m 1024"
+$!
+$! #file
+$ CALL TOOLTEST test4.h5 "-e h5repack_info.txt"
+$!
+$!
+$! #########################################################
+$! # layout options (these files have no filters)
+$! #########################################################
+$!
+$ CALL TOOLTEST test4.h5 "-l dset2:""CHUNK""=20x10"
+$ CALL TOOLTEST test4.h5 "-l """HUNK""=20x10"
+$ CALL TOOLTEST test4.h5 "-l dset2:""CONTI"""
+$ CALL TOOLTEST test4.h5 "-l ""CONTI"""
+$ CALL TOOLTEST test4.h5 "-l dset2:""COMPA"""
+$ CALL TOOLTEST test4.h5 "-l ""COMPA"""
+$!
+$!
+$! ################################################################
+$! # layout conversions (file has no filters)
+$! ###############################################################
+$!
+$ CALL TOOLTEST test4.h5 "-l dset_compact:""CONTI"""
+$ CALL TOOLTEST test4.h5 "-l dset_compact:""CHUNK""=2x5"
+$ CALL TOOLTEST test4.h5 "-l dset_compact:""COMPA"""
+$ CALL TOOLTEST test4.h5 "-l dset_contiguous:""COMPA"""
+$ CALL TOOLTEST test4.h5 "-l dset_contiguous:""CHUNK""=3x6"
+$ CALL TOOLTEST test4.h5 "-l dset_contiguous:""CONTI"""
+$ CALL TOOLTEST test4.h5 "-l dset_chunk:""COMPA"""
+$ CALL TOOLTEST test4.h5 "-l dset_chunk:""CONTI"""
+$ CALL TOOLTEST test4.h5 "-l dset_chunk:""CHUNK""=18x13"
+$!
+$!
+$TOOLTEST: SUBROUTINE
+
+$ len = F$LENGTH(P1)
+$ base = F$EXTRACT(0,len-3,P1)
+$ output = base + "out.h5"
+$ output_err = base + ".err"
+$
+$ begin = "Testing h5repack"
+$ !
+$ ! Run the test and save output in the 'actual' file
+$ !
+$ define/nolog sys$error 'output_err'
+$ ON ERROR THEN CONTINUE
+$ h5repack -i 'P1 -o 'output' 'P2
+$ h5diff 'P1 'output'
+$ deassign sys$error
+$ if F$SEARCH(output_err) .NES. ""
+$ then
+$ result = "PASSED"
+$ line = F$FAO("!16AS !20AS !43AS !70AS", begin, P1, P2, result)
+$ else
+$ result = "*FAILED*"
+$ line = F$FAO("!16AS !20AS !42AS !69AS", begin, P1, P2, result)
+$ endif
+$ !
+$ ! Print test result
+$ !
+$ write sys$output line
+$ !
+$ del *out.h5;*
+$ !
+$ENDSUBROUTINE
+
diff --git a/vms/tools/h5repack/make.com b/vms/tools/h5repack/make.com
index 2d7153f..cc22a15 100644
--- a/vms/tools/h5repack/make.com
+++ b/vms/tools/h5repack/make.com
@@ -31,7 +31,7 @@ $!
$ ccc 'cobj
$ type sys$input
Creating h5repack
-$ link/debug/exe=h5repack.exe -
+$ link/exe=h5repack.exe -
h5repack_main, h5repack, h5repack_copy, h5repack_filters, -
h5repack_list, h5repack_opttable, h5repack_parse, h5repack_refs, -
h5repack_verify, -