diff options
Diffstat (limited to 'vms')
| -rw-r--r-- | vms/tools/h5diff/check_h5diff.com | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/vms/tools/h5diff/check_h5diff.com b/vms/tools/h5diff/check_h5diff.com new file mode 100644 index 0000000..da9e66a --- /dev/null +++ b/vms/tools/h5diff/check_h5diff.com @@ -0,0 +1,334 @@ +$!# +$!# Copyright by the Board of Trustees of the University of Illinois. +$!# All rights reserved. +$!# +$!# This file is part of HDF5. The full HDF5 copyright notice, including +$!# terms governing use, modification, and redistribution, is contained in +$!# the files COPYING and Copyright.html. COPYING can be found at the root +$!# of the source code distribution tree; Copyright.html can be found at the +$!# root level of an installed copy of the electronic HDF5 document set and +$!# is linked from the top-level documents page. It can also be found at +$!# http://hdf.ncsa.uiuc.edu/HDF5/doc/Copyright.html. If you do not have +$!# access to either file, you may request a copy from hdfhelp@ncsa.uiuc.edu. +$!# +$! +$ ! +$ ! This command file tests h5diff utility. The command file has to +$ ! run in the [hdf5-top.tools.testfiles] directory. +$ ! +$ ! +$ ! Define h5diff symbol +$ ! +$! set message/notext/nofacility/noidentification/noseverity +$ current_dir = F$DIRECTRY() +$ len = F$LENGTH(current_dir) +$ temp = F$EXTRACT(0, len-10, current_dir) +$ h5diff_dir = temp + "H5DIFF]" +$ h5diff :== $sys$disk:'h5diff_dir'h5diff.exe +$ ! +$ ! Define output for diff command that compares expected and actual +$ ! outputs of h5diff +$ ! +$ create h5diff.log +$ ! +$ ! h5diff tests +$ ! +$ + +$!# 1.0 +$ CALL TOOLTEST h5diff_10.txt "-h" +$! +$!# 1.1 normal mode +$ CALL TOOLTEST h5diff_11.txt "file1.h5 file2.h5" +$! +$!# 1.2 normal mode with objects +$ CALL TOOLTEST h5diff_12.txt "file1.h5 file2.h5 g1/dset1 g1/dset2" +$! +$!# 1.3 report mode +$ CALL TOOLTEST h5diff_13.txt "file1.h5 file2.h5 -r" +$! +$!# 1.4 report mode with objects +$ CALL TOOLTEST h5diff_14.txt "file1.h5 file2.h5 -r g1/dset1 g1/dset2" +$! +$!# 1.5 with -d +$ CALL TOOLTEST h5diff_15.txt "file1.h5 file2.h5 -r -d 5 g1/dset3 g1/dset4" +$! +$!# 1.6 with -p +$ CALL TOOLTEST h5diff_16.txt "file1.h5 file2.h5 -r -p 0.05 g1/dset3 g1/dset4" +$! +$!# 1.7 verbose mode +$ CALL TOOLTEST h5diff_17.txt "file1.h5 file2.h5 -v" +$! +$!# 1.8 quiet mode +$ CALL TOOLTEST h5diff_18.txt "file1.h5 file2.h5 -q" +$! +$!# 1.9.1 with -p (int) +$ CALL TOOLTEST h5diff_191.txt "file1.h5 file1.h5 -v -p 0.02 g1/dset5 g1/dset6" +$! +$!# 1.9.2 with -p (unsigned long_long) +$ CALL TOOLTEST h5diff_192.txt "file1.h5 file1.h5 -v -p 0.02 g1/dset7 g1/dset8" +$! +$! +$!# ############################################################################## +$!# # not comparable types +$!# ############################################################################## +$! +$!# 2.0 +$ CALL TOOLTEST h5diff_20.txt "file3.h5 file3.h5 -v dset g1" +$ +$!# 2.1 +$ CALL TOOLTEST h5diff_21.txt "file3.h5 file3.h5 -v dset l1" +$! +$!# 2.2 +$ CALL TOOLTEST h5diff_22.txt "file3.h5 file3.h5 -v dset t1" +$! +$!# ############################################################################## +$!# # compare groups, types, links (no differences and differences) +$!# ############################################################################## +$! +$!# 2.3 +$ CALL TOOLTEST h5diff_23.txt "file3.h5 file3.h5 -v g1 g1" +$! +$!# 2.4 +$ CALL TOOLTEST h5diff_24.txt "file3.h5 file3.h5 -v t1 t1" +$! +$!# 2.5 +$ CALL TOOLTEST h5diff_25.txt "file3.h5 file3.h5 -v l1 l1" +$! +$!# 2.6 +$ CALL TOOLTEST h5diff_26.txt "file3.h5 file3.h5 -v g1 g2" +$! +$!# 2.7 +$ CALL TOOLTEST h5diff_27.txt "file3.h5 file3.h5 -v t1 t2" +$! +$!# 2.8 +$ CALL TOOLTEST h5diff_28.txt "file3.h5 file3.h5 -v l1 l2" +$! +$! +$! +$!# ############################################################################## +$!# # Dataset types +$!# ############################################################################## +$ +$!# 5.0 +$ CALL TOOLTEST h5diff_50.txt "file4.h5 file4.h5 -v dset0a dset0b" +$! +$!# 5.1 +$ CALL TOOLTEST h5diff_51.txt "file4.h5 file4.h5 -v dset1a dset1b" +$! +$!# 5.2 +$ CALL TOOLTEST h5diff_52.txt "file4.h5 file4.h5 -v dset2a dset2b" +$! +$!# 5.3 +$ CALL TOOLTEST h5diff_53.txt "file4.h5 file4.h5 -v dset3a dset4b" +$! +$!# 5.4 +$ CALL TOOLTEST h5diff_54.txt "file4.h5 file4.h5 -v dset4a dset4b" +$! +$!# 5.5 +$ CALL TOOLTEST h5diff_55.txt "file4.h5 file4.h5 -v dset5a dset5b" +$! +$!# 5.6 +$ CALL TOOLTEST h5diff_56.txt "file4.h5 file4.h5 -v dset6a dset6b" +$! +$!# 5.7 +$ CALL TOOLTEST h5diff_57.txt "file4.h5 file4.h5 -v dset7a dset7b" +$! +$#! 5.8 (region reference) +$ CALL TOOLTEST h5diff_58.txt "file7.h5 file8.h5 -v refreg" +$! +$!# ############################################################################## +$!# # Error messages +$!# ############################################################################## +$! +$! +$!# 6.0: Check if the command line number of arguments is less than 3 +$ CALL TOOLTEST h5diff_600.txt "file1.h5" +$! +$!# 6.1: Check for invalid options +$ CALL TOOLTEST h5diff_601.txt "file1.h5 file2.h5 -x" +$! +$!# ############################################################################## +$!# # -d +$!# ############################################################################## +$! +$!# 6.2: no value +$ CALL TOOLTEST h5diff_602.txt "file1.h5 file2.h5 -d g1/dset3 g1/dset4" +$! +$!# 6.3: negative value +$ CALL TOOLTEST h5diff_603.txt "file1.h5 file2.h5 -d -4 g1/dset3 g1/dset4" +$! +$!# 6.4: zero +$ CALL TOOLTEST h5diff_604.txt "file1.h5 file2.h5 -d 0 g1/dset3 g1/dset4" +$! +$!# 6.5: non number +$ CALL TOOLTEST h5diff_605.txt "file1.h5 file2.h5 -d u g1/dset3 g1/dset4" +$! +$!# 6.6: hexadecimal +$ CALL TOOLTEST h5diff_606.txt "file1.h5 file2.h5 -d 0x1 g1/dset3 g1/dset4" +$! +$!# 6.7: string +$ CALL TOOLTEST h5diff_607.txt "file1.h5 file2.h5 -d "1" g1/dset3 g1/dset4" +$! +$!# 6.8: repeated option +$ CALL TOOLTEST h5diff_608.txt "file1.h5 file2.h5 -d 1 -d 2 g1/dset3 g1/dset4" +$! +$!# 6.9: number larger than biggest difference +$ CALL TOOLTEST h5diff_609.txt "file1.h5 file2.h5 -d 200 g1/dset3 g1/dset4" +$! +$!# 6.10: number smaller than smallest difference +$ CALL TOOLTEST h5diff_610.txt "file1.h5 file2.h5 -d 1 g1/dset3 g1/dset4" +$! +$! +$!# ############################################################################## +$!# # -p +$!# ############################################################################## +$! +$! +$!# 6.11: no value +$ CALL TOOLTEST h5diff_611.txt "file1.h5 file2.h5 -r -p g1/dset3 g1/dset4" +$! +$!# 6.12: negative value +$ CALL TOOLTEST h5diff_612.txt "file1.h5 file2.h5 -p -4 g1/dset3 g1/dset4" +$! +$!# 6.13: zero +$ CALL TOOLTEST h5diff_613.txt "file1.h5 file2.h5 -p 0 g1/dset3 g1/dset4" +$! +$!# 6.14: non number +$ CALL TOOLTEST h5diff_614.txt "file1.h5 file2.h5 -p u g1/dset3 g1/dset4" +$! +$!# 6.15: hexadecimal +$ CALL TOOLTEST h5diff_615.txt "file1.h5 file2.h5 -p 0x1 g1/dset3 g1/dset4" +$! +$!# 6.16: string +$ CALL TOOLTEST h5diff_616.txt "file1.h5 file2.h5 -p "0.21" g1/dset3 g1/dset4" +$! +$!# 6.17: repeated option +$ CALL TOOLTEST h5diff_617.txt "file1.h5 file2.h5 -p 0.21 -p 0.22 g1/dset3 g1/dset4" +$! +$!# 6.18: number larger than biggest difference +$ CALL TOOLTEST h5diff_618.txt "file1.h5 file2.h5 -p 2 g1/dset3 g1/dset4" +$! +$!# 6.19: number smaller than smallest difference +$ CALL TOOLTEST h5diff_619.txt "file1.h5 file2.h5 -p 0.005 g1/dset3 g1/dset4" +$! +$! +$! +$!# ############################################################################## +$!# # -n +$!# ############################################################################## +$! +$! +$!# 6.20: no value +$ CALL TOOLTEST h5diff_620.txt "file1.h5 file2.h5 -n g1/dset3 g1/dset4" +$! +$!# 6.21: negative value +$ CALL TOOLTEST h5diff_621.txt "file1.h5 file2.h5 -n -4 g1/dset3 g1/dset4" +$! +$!# 6.22: zero +$ CALL TOOLTEST h5diff_622.txt "file1.h5 file2.h5 -n 0 g1/dset3 g1/dset4" +$! +$!# 6.23: non number +$ CALL TOOLTEST h5diff_623.txt "file1.h5 file2.h5 -n u g1/dset3 g1/dset4" +$! +$!# 6.24: hexadecimal +$ CALL TOOLTEST h5diff_624.txt "file1.h5 file2.h5 -n 0x1 g1/dset3 g1/dset4" +$! +$!# 6.25: string +$ CALL TOOLTEST h5diff_625.txt "file1.h5 file2.h5 -n "2" g1/dset3 g1/dset4" +$! +$!# 6.26: repeated option +$ CALL TOOLTEST h5diff_626.txt "file1.h5 file2.h5 -n 2 -n 3 g1/dset3 g1/dset4" +$! +$!# 6.27: number larger than biggest difference +$ CALL TOOLTEST h5diff_627.txt "file1.h5 file2.h5 -n 200 g1/dset3 g1/dset4" +$! +$!# 6.28: number smaller than smallest difference +$ CALL TOOLTEST h5diff_628.txt "file1.h5 file2.h5 -n 1 g1/dset3 g1/dset4" +$! +$!# ############################################################################## +$!# 6.29 non valid files +$!# ############################################################################## +$! +$ CALL TOOLTEST h5diff_629.txt "file1.h6 file2.h6" +$! +$!# ############################################################################## +$!# 7. attributes +$!# ############################################################################## +$! +$ CALL TOOLTEST h5diff_70.txt "file5.h5 file6.h5 -v" +$! +$!# ############################################################################## +$!# 8. all dataset datatypes +$!# ############################################################################## +$! +$ CALL TOOLTEST h5diff_80.txt "file7.h5 file8.h5 -v" +$! +$!# 9. compare a file with itself +$! +$ CALL TOOLTEST h5diff_90.txt "file1.h5 file1.h5" +$! +$! +$! +$TOOLTEST: SUBROUTINE +$ +$ len = F$LENGTH(P1) +$ base = F$EXTRACT(0,len-2,P1) +$ actual = base + "out" +$ actual_err = base + "err" +$ +$ begin = "Testing h5diff " +$ ! +$ ! Run the test and save output in the 'actual' file +$ ! +$ define/nolog sys$output 'actual' +$ define/nolog sys$error 'actual_err' +$ write sys$output "#############################" +$ write sys$output "Expected output for 'h5diff ''P2''" +$ write sys$output "#############################" +$ ON ERROR THEN CONTINUE +$ h5diff 'P2 +$ deassign sys$output +$ deassign sys$error +$ if F$SEARCH(actual_err) .NES. "" +$ then +$ set message/notext/nofacility/noidentification/noseverity +$ append 'actual_err' 'actual' +$ set message/ntext/facility/identification/severity +$ endif +$ ! +$ ! Compare the results +$ ! +$ diff/output=h5diff_temp/ignore=(spacing,trailing_spaces,blank_lines) 'actual' 'P1' +$ open/read temp_out h5diff_temp.dif +$ read temp_out record1 +$ close temp_out +$ ! +$ ! Extract error code and format output line +$ ! +$ len = F$LENGTH(record1) +$ err_code = F$EXTRACT(len-1,1,record1) +$ if err_code .eqs. "0" +$ then +$ result = "PASSED" +$ line = F$FAO("!15AS !50AS !70AS", begin, P2, result) +$ else +$ result = "*FAILED*" +$ line = F$FAO("!15AS !49AS !69AS", begin, P2, result) +$ endif +$ ! +$ ! Print test result +$ ! +$ write sys$output line +$ ! +$ ! Append the result to the log file +$ ! +$ append h5diff_temp.dif h5diff.log +$ ! +$ ! Delete temporary files +$ ! +$! del *.out;* +$! del *.dif;* +$ ! +$ENDSUBROUTINE + |