1 files changed, 0 insertions, 240 deletions
diff --git a/windows/hdf5bt.BAT b/windows/hdf5bt.BAT
deleted file mode 100755
index 2f75286..0000000
--- a/windows/hdf5bt.BAT
+++ /dev/null
@@ -1,240 +0,0 @@
-@echo OFF
-rem Copyright by The HDF Group.
-rem Copyright by the Board of Trustees of the University of Illinois.
-rem All rights reserved.
-rem
-rem This file is part of HDF5.  The full HDF5 copyright notice, including
-rem terms governing use, modification, and redistribution, is contained in
-rem the files COPYING and Copyright.html.  COPYING can be found at the root
-rem of the source code distribution tree; Copyright.html can be found at the
-rem root level of an installed copy of the electronic HDF5 document set and
-rem is linked from the top-level documents page.  It can also be found at
-rem http://hdfgroup.org/HDF5/doc/Copyright.html.  If you do not have
-rem access to either file, you may request a copy from help@hdfgroup.org.
-
-
-rem File Name: hdf5bt.bat
-rem This batch file is used to build and test HDF5 Libraries and Tools.
-rem This batch file takes the following options:
-rem .  /vs9              Build HDF5 using Visual Studio 2008
-rem .  /fort             Build and test HDF5 with Fortran libraries
-rem .  /useenv           Build HDF5 using compiler settings defined
-rem .                    in the environment, rather than the IDE.
-rem .  /ivf101           Build HDF5 Fortran using Intel Visual Fortran 10.1
-rem .  /log              Log the build and test results in files defined by
-rem .                      environment variables HDF5BUILD_LOG and
-rem .                      HDF5CHECK_LOG
-rem .  /?                Help information
-
-rem This batch file makes the following assumptions:
-rem    - The appropriate version of Visual Studio is installed and setup
-rem    - The directory structure is setup from a fresh source copy
-rem    - copy_hdf.bat has already been run from the ./windows directory
-rem    - Visual Studio already contains the required paths for external libraries
-rem    - szip and zlib DLLs are already placed in an accessible directory
-rem    - hdf5_ext_szip or hdf5_ext_zlib have been set accordingly
-rem    - if building with the /useenv option, szip and zlib paths have been added
-rem      to %include% and %libpath% as necessary.
-rem    - if using the /log option, hdf5build_log and hdf5_check log should be defined
-rem    - in the environment.
-rem    - The target platform architecture is specified in the environment
-rem      variable PROCESSOR_ARCHITECTURE
-
-rem By default, only C and C++ libraries are built and tested.
-
-setlocal enabledelayedexpansion
-pushd %~dp0
-
-set nerrors=0
-if "%1"=="/?" goto help
-goto main
-
-rem Print a help message
-:help
-
-    echo.Builds and tests HDF5 Libraries and Tools.
-    echo.
-    echo Usage: %~nx0 [OPTION]
-    echo.
-    echo.   /vs9              Build HDF5 using Visual Studio 2008
-    echo.   /fort             Build and test HDF5 with Fortran libraries
-    echo.   /ivf101           Build HDF5 Fortran using Intel Visual Fortran 10.1
-    echo.   /useenv           Build HDF5 using compiler settings defined
-    echo.                     in the environment, rather than the IDE.
-    echo.   /?                Help information
-
-    exit /b 0
-
-
-rem Parse through the parameters sent to file, and set appropriate variables
-:parse_params
-
-    for %%a in (%*) do (
-        if "%%a"=="/vs9" (
-            rem Use Visual Studio 2008 to build
-            set hdf5_vs2008=true
-            
-        ) else if "%%a"=="/fort" (
-            rem Enable Fortran
-            set hdf5_enablefortran=true
-            
-        ) else if "%%a"=="/ivf101" (
-            rem Enable Fortran
-            set hdf5_ivf101=true
-            
-        ) else if "%%a"=="/useenv" (
-            rem Pass /useenv flag to devenv
-            set hdf5_useenv=true
-            
-        ) else if "%%a"=="/log" (
-            rem Log our results to files defined in environment
-            set hdf5_logresults=true
-                        
-        ) else if "%%a"=="/?" (
-            rem Set errorlevel 1 and send to help
-            call :help
-            exit /b 1
-            
-        ) else (
-            rem Set errorlevel 2 to send to help if we receive a bad parameter
-            echo.Unknown option: %%a
-            call :help
-            exit /b 2
-        )
-    )
-    
-    exit /b 0
-
-    
-rem Setup our environment
-:setup
-
-    rem All we need to do here is setup the parameters that will be sent to
-    rem hdf5build and hdf5check.
-    set hdf5build_params=
-    set hdf5check_params=enablecpp
-    
-    if defined hdf5_vs2008 (
-        set hdf5build_params=%hdf5build_params% /vs9
-    )
-
-    if defined hdf5_enablefortran (
-        set hdf5build_params=%hdf5build_params% /fort
-        set hdf5check_params=enableall
-    )
-    
-    if defined hdf5_ivf101 (
-        set hdf5build_params=%hdf5build_params% /ivf101
-    )
-    
-    if defined hdf5_useenv (
-        set hdf5build_params=%hdf5build_params% /useenv
-    )
-    
-    rem Clear out our log files if they will be used
-    if defined hdf5_logresults (
-        if not defined hdf5build_log (
-            echo.Error: HDF5BUILD_LOG not defined in environment!
-            exit /b 1
-        ) else (
-            type nul > !hdf5build_log!
-        )
-        
-        if not defined hdf5check_log (
-            echo.Error: HDF5CHECK_LOG not defined in environment!
-            exit /b 1
-        ) else (
-            type nul > !hdf5check_log!
-        )
-    )
-    
-    exit /b 0
-
-
-rem Build HDF5 libraries and tools
-:build
-
-    if defined hdf5_logresults (
-        echo.Calling hdf5bbuild.bat %hdf5build_params%
-        echo.Results logged in %hdf5build_log%
-        call hdf5build.bat %hdf5build_params% > !hdf5build_log! 2>&1
-    ) else (
-        call hdf5build.bat %hdf5build_params%
-    )
-
-    exit /b
-
-
-rem Test our libraries and tools
-:test
-    if defined hdf5_logresults (
-        echo.Calling hdf5check.bat %hdf5check_params%
-        echo.Results logged in %hdf5check_log%
-        call hdf5check %hdf5check_params% > !hdf5check_log! 2>&1
-    ) else (
-        call hdf5check %hdf5check_params%
-    )
-
-    exit /b
-
-
-rem Handle errors
-:error
-
-    rem For now, our error handling consists of setting nerrors and quitting
-    echo.HDF5 build-test failed.
-    set /a nerrors=%nerrors%+1
-    goto end
-    
-    rem We'll never really get here, but we keep this line for consistency.
-    exit /b
-
-
-rem This is where the magic happens
-:main
-
-    call :parse_params %*
-    if not errorlevel 0 (
-        if errorlevel 1 (
-            rem This isn't an error case-- this means /? was specified.  Simply
-            rem quit.
-            goto end
-            
-        ) else (
-            rem Error case.
-            echo.Error parsing parameters!
-            goto error
-        )
-    )
-
-    call :setup
-    if not errorlevel 0 (
-        echo.Error setting up hdf5bt environment!
-        goto error
-    )
-
-    echo.*****************************************************************************
-    echo.                        Build and Test HDF5 Library and Tools
-    echo.*****************************************************************************
-    echo.
-
-    call :build
-    if not errorlevel 0 (
-        echo.Error building HDF5 libraries!
-        goto error
-    )
-
-    call :test
-    if not errorlevel 0 (
-        echo.Error testing HDF5 libraries!
-        goto error
-    )
-
-    if "%nerrors%"=="0" (
-        echo. All HDF5 libraries and tools build and tested successfully!
-    )
-    rem Fall through to end
-
-:end
-    popd
-    endlocal & exit /b %nerrors%